[Q] No Wifi AFTER a restore to factory default? - Samsung Galaxy 5 I5500

Best all of you,
I'm new on this forum after I spend a full day looking for the solution to the problem that occurred when I received a perfectly good working Canadian Samsung GTI5500 and decided it was appropriate to perform a "restore to factory default" to get rid of any private information left behind by the previous user. A bad idea apparently because it will not connect to the same Wifi networks any more as it had been doing before the reset. It does not even try to connect it immediately gives "unable to connect to the network" I already tried a lot of things which i will list down here, in the hope someone can point out what i've been doing wrong or what I should be doing next to get it fixed.
- Airplane mode is obviously off
- Trying to add a network manually gives "unable to save network".
- Adding a Static IP doesn't work
- I tried a *#....# code to check if some WiFi setting was off can't remember the code but it didn't work.
- Tried another restore to factory default
- Tried a factory format reset which should reinstall current firmware with the *2767*3855# code
- Tried upgrading software with KIES, unfortunately "Your device does not support software upgrading via kies"
After all of this started looking into rooting and flashing firmware or ROM myself, but as a noob this is still kinda confusing and not sure if possible in Canada because it's not available at this link (http://forum.xda-developers.com/showthread.php?t=1087402) And I'm wondering if flashing ROM will solve my issue, or if there is something else to do..
P.S. Current firmware according *#1234# is PDA: i5500mugjj7 / csc: i5500mvmcjj7) don't know if thats relevant, but hea I hope anyone can help, would be greatly appreciated!
Thanks!

Do you try stock rom to check if wifi still available or not

Related

[Q] Urgent! Data Won't Work on Any Rom, Even Stock!

Hi,
I recently acquired this galaxy S after my HD2 stopped functioning. When I got it, it had Cynaogenmod on it; however, I wanted MIUI. So, I reverted the phone to stock configurations and loaded MIUI on there.
I used the methods posted in this thread and loaded the revamped SS-6 MIUI rom (I tried all the way up to SS-8). I later found that this was an outdated method and used the suggestions made by the rom creator. Both times I loaded the OS successfully. Unfortunately, the data wasn't working. It showed that I was connected and had full bars with 3G or H connection... but all apps that required data still failed to connect.
I always got a message saying "Data connectivity problem: Server failed to communicate. Please try again later." So, I reverted the phone back to stock JFD using ODIN. I still have the data issue -- nothing connects. The bars are still full and the 3G symbol is still there... it just won't work.
The phone info is:
Model Number: SGH-T959
Firmware Version: 2.1-update 1
Baseband Version: T959UVJFD
Kernel Version: 2.6.29
Build Number: ECLAIR
The "Mobile Network Type" reads "HSDPA" and the "Mobile Network State" reads "connected".
Just to clarify, I can still text and call. I just have no data. Wifi works. Any assistance would be greatly appreciated; I'm completely stumped here. Thanks!
You saw the answer in the other thread, right?
Nope, I've been looking for an answer. Is there a thread that has a solution?
The one titled: "Miui completely ignores Data settings". It's a problem with the latest MIUI.
Check out the second post in the GingerZen thread. Follow the steps and ODIN using Eugene's Froyo That Does Not Brick. It should give you a fresh start. As a bonus, it re-roots your phone in the process. Note: only check re-partition for the second flash.
Awesome! Thanks, I'll try it. So, I just use the PIT file that comes with vibrant AIO?
You could grab the one from s15274n's "Noob Guide" too.
Then save all 3 files on your desktop for the next time you have to ODIN.
zephyranthesiii said:
Hi,
I recently acquired this galaxy S after my HD2 stopped functioning. When I got it, it had Cynaogenmod on it; however, I wanted MIUI. So, I reverted the phone to stock configurations and loaded MIUI on there.
I used the methods posted in this thread and loaded the revamped SS-6 MIUI rom (I tried all the way up to SS-8). I later found that this was an outdated method and used the suggestions made by the rom creator. Both times I loaded the OS successfully. Unfortunately, the data wasn't working. It showed that I was connected and had full bars with 3G or H connection... but all apps that required data still failed to connect.
I always got a message saying "Data connectivity problem: Server failed to communicate. Please try again later." So, I reverted the phone back to stock JFD using ODIN. I still have the data issue -- nothing connects. The bars are still full and the 3G symbol is still there... it just won't work.
The phone info is:
Model Number: SGH-T959
Firmware Version: 2.1-update 1
Baseband Version: T959UVJFD
Kernel Version: 2.6.29
Build Number: ECLAIR
The "Mobile Network Type" reads "HSDPA" and the "Mobile Network State" reads "connected".
Just to clarify, I can still text and call. I just have no data. Wifi works. Any assistance would be greatly appreciated; I'm completely stumped here. Thanks!
Click to expand...
Click to collapse
Your APN settings are screwed up. You'll need to reset your APN settings. Do not go flashing random software to fix your APN settings.
Hey, thanks for the suggestion. I followed the steps, but I'm still experiencing the data failure. :-\
I expected that to restore all settings. Google the correct APN settings as suggested. Hope that's it.
(But keep the EFTDNB files handy. They aren't exactly random and will usually get you out of a bind.)
I'm pretty sure I have the correct APN settings. At least, they seem to match what everyone else has posted. I noticed that the arrows around the data symbol (3G or H) only light up on the left side. This to me seems to show that I'm sending data; I'm just not receiving it.
Edit: Solution Found! It was on T-Mobile's end. Apparently, the data package from my HD2 was not compatible with this device. So, they set me up with the "Android equivalent" and "presto!", it works. Thanks for all the assistance!

Network Problems after upgrading to ICS

In summary I have upgraded to ICS (Official), but am unable to connect to my carrier network and some of the OS seems missing; If I long press my power button I don't get the device menu, it just turns off.
Full details:
I am on a South African network, and the ROM shipped with my device is I9100XWKI4_I9100OJCKI1_XFA. I downloaded two variants of the new ICS ROM from link;XWLP7 & XXLPQ and I downloaded the latest Odin.
From there I followed these instructions:
Extract the firmware
Open the included Odin
Put your device in Recovery MODE (Home + Volume up + Power)
Wipe Data/Factory reset
Wipe Cache
Take Out Your battery & put it back in
Put your device into Download MODE (Home + Volume Down + Power)
Click PDA and select *.tar.md5
Then finally click START!
On both ROMs, following the PASS message my phone rebooted, and everything starts up perfectly; Applications get installed and so on. Only one big problem, I can not connect to a carrier network (The OS also never prompts me to unlock my SIM card). When I bring down my network menu (swipe down) it says Emergency Calls Only. I then figured I would try and manually select a carrier network, so I went and scanned for networks and selected Vodacom. I then get an error message saying "Error cannot connect". I also don't seem to have access to the menu one gets when holding down the power button, if I hold it down the device shuts down; no silent, power off, etc menu.
This happens with both of the rom variants I have. After trying everything in my limited knowledge I gave up, found and downloaded the old I9100XWKI4_I9100OJCKI1_XFA rom. I am now back on that rom and everything is working fine.
I have also tried following these steps: link
Except I restore factory settings and wipe cache before deploying the ROM. I then sought the help of a fellow Droid user from the South African forums, who suggested that I flash onto the old Dutch firmware (GT-I9100_XEN_I9100XWKJ3_I9100XENKJ1_I9100XXKI4). After confirming it worked and I could get onto the network, I took the SIM out and did a proper firmware upgrade via KIES. The upgrade went in without any issue, BUT after the upgrade the problem was still there; no carrier network, no power button menu.
After further fiddling I figured that the OS not asking for my SIM PIN must be one of the causes of my issue, so I went to my settings and turned SIM security off and on. After doing so, suddenly the device hopped onto my carrier network. This did not solve the issue though, as I have to do this after every reboot.
I have checked to ensure my IMEI number is fine, and it is 100%. When I flashed to the XEO version, I could get into the *#272* menu and change my CSC. After doing so, problem was still there.
I am now totally confused as to what on earth could be causing the issue, especially considering other people on the same device with the same carrier seem to be able to flash without hassle - does anyone have any suggestions, or ideas? Come on XDA!
Try checking the efs\imei folder to see if the keystr file is there. If its not, make one with the value 1. Search the q and a forum for more info
Can this be done without rooting my phone?
EDIT: Required rooting. Was the missing "keystr" file in my EFS/IMEI directory (link)
Hello guys ,
Please help me .. i installed ICS from Kies . b4 i was in Gingerbread 2.3.6 .... after installing ICS.. i cud not make phone calls ... it says Not registered on Network... what is solution ? pl help me
grajesh83 said:
Hello guys ,
Please help me .. i installed ICS from Kies . b4 i was in Gingerbread 2.3.6 .... after installing ICS.. i cud not make phone calls ... it says Not registered on Network... what is solution ? pl help me
Click to expand...
Click to collapse
Dial *#06# and tell wat u c
Peace
Hit Thanks & It will Disappear
Sent from S II Running Fully Modified Official ICS 4.0.4
Next Device: Upcoming Nexus
grajesh83 said:
Hello guys ,
Please help me .. i installed ICS from Kies . b4 i was in Gingerbread 2.3.6 .... after installing ICS.. i cud not make phone calls ... it says Not registered on Network... what is solution ? pl help me
Click to expand...
Click to collapse
Reflash modem through Odin.

[Q] Wifi Problem !

Hey guys !
To begin with, I have searched and searched and have not been able to get help.
Phone stats :
Model GT - I9100
Android - 2.3.5
Baseband:
XXKI4
The problem is, I turn on wifi, it scans, then turns off. I have tried adding a wifi and it comes up "unable to save the network".
I got this phone 2 days ago from a friend.
Mac address and IP address are listed as "Unavailable" in advances settings.
PLEASE HELP!
Tried a hard reset?
Thanks for a quick reply !
I have tried:
Power button and home button (holding)
Factory reset. (Home + Power + Volume up)
Are either of them classified as a "hard reset"
I'm sorry, I am very new to android and have just moved over from apple. Not looking to go back just hoping to clear up this issue !
Yeah, that's one way to do one.
You should try updating your device. Your firmware is pretty outdated.
Either with KIES (crap software, but simple - you know, just like iOS ;-) ) or Odin/Heimdall (little harder, but works for sure).
Tell me if you need help.
Hey, updated to ICS using odin after researching all about roms and kernals and what not.
It did fix the issue of the phone constantly in a loop of turning itself off (HOORAY). Wifi is still not working
Then try a Rom that isn't based on Samsung's. Flash the resurrection edition of CM9 via Odin and after that the latest nightly via cwm. It's worth a shot, as CM comes with its own kernel and such.
If it's working under CM it was some sort of software fault and we can try to figure it out (unless you want to stick with CM).
If it doesn't, it looks like a hardware fault and I cannot help you.

[Q] Lost network after flashing

Hi there!
I know I'm new to here, but not new to android, flashing, etc...
So I recently bought a Galaxy S3 international version (GT-I9300).
I tried to update it's software with KIES, and it stopped on 61%.
KIES tried to flash the newest 4.0.4 (UK) firmware (I9300XXBLG8).
I got the .tar.md5 file out of temporary directory and flashed it manually from ODIN. It booted normally, but i had (have) no network signal. When I turned it on it requested my PIN but when I entered it, the phone doesn't connected to my carrieer's network. My phone is unlocked (checked it with galaxsim), and my IMEI number doesn't changed or corrupted. (Checked under the battery). I live in Hungary and my carrieer is T-Mobile. Tried hard reset, wipe.
Can anybody please help me to solve this problem?
Thank you very much in advance.
Tom
Hi Tom ,
it happened that I had a bit of a similar problem before ( not with my Current International S3 but with my older Xperia neo v ) , after flashing a new ROM something went wrong and I had lost network , tried everything possible but it wouldn't do anything.
my solution was flashing back to my previous ROM , so I highly recommend to you to flash back using your NANDROID backup ( I hope you made one before Flashing... ) or you can try another ROM / or even RE-flash your current ROM but pay more attention this time and make sure nothing goes wrong , and also make sure you do a factory reset , Cache wipe and Dalvik cache Wipe before you flash it just to make sure everything is clean.
I hope this helps , and if I helped you by any way possible don't hesitate and press the Thanks button on your LEFT :good:
Cheers
Astrokarim said:
I hope this helps , and if I helped you by any way possible don't hesitate and press the Thanks button on your LEFT :good:
Cheers
Click to expand...
Click to collapse
OT I don't have thanks buttons, maybe you should qualify with an IF statement?
Bad news, I don't really know what my original firmware was, so I can just try Kangburra's tip... I have 25 min waiting time on hotfile.com, I will the download the latest 4.1.1 unbranded firmware, which has PDA I9300XXDLIH and CSC I9300PHEDLI1. I will write about the results ASAP.
edit: I'm too tired, I thoght your signature was a suggestion for me
Tomlincoln said:
Hi there!
I know I'm new to here, but not new to android, flashing, etc...
So I recently bought a Galaxy S3 international version (GT-I9300).
I tried to update it's software with KIES, and it stopped on 61%.
KIES tried to flash the newest 4.0.4 (UK) firmware (I9300XXBLG8).
I got the .tar.md5 file out of temporary directory and flashed it manually from ODIN. It booted normally, but i had (have) no network signal. When I turned it on it requested my PIN but when I entered it, the phone doesn't connected to my carrieer's network. My phone is unlocked (checked it with galaxsim), and my IMEI number doesn't changed or corrupted. (Checked under the battery). I live in Hungary and my carrieer is T-Mobile. Tried hard reset, wipe.
Can anybody please help me to solve this problem?
Thank you very much in advance.
Tom
Click to expand...
Click to collapse
Dont worry just go to mobile network setting then apn press menu and chosse new apn, search on google for your apns for the carrier. It will be running in no time. :laugh:
Roukomex said:
Dont worry just go to mobile network setting then apn press menu and chosse new apn, search on google for your apns for the carrier. It will be running in no time. :laugh:
Click to expand...
Click to collapse
It seems you misunderstood me... I have absolutely no network signal from my carrier :/
Update: Okay the last 4.1.1 mentioned before is not working. Now it sees my network just doesn't register on it. Will try I9300XXALE8_I9300OXFALE5_XEH now.
Found something: All of ROMs installed I'm seem to be reachable. My friend ringed me from his mobile and IT WAS RINGING. If I turned off my mobile, it was not ringing of course. So what the hell is this?

[Q] Galaxy S III i9305 Wifi Problem

Good day,
I have a samsung galaxy s3 i9305 LTE and I have been using this device without problems for around 2 years now. It runs on Jellybean 4.3 baseband version i9305zhucnb1. It has been running on this firmware for a couple months now ever since it has been rolled out. The problem is, the WIFI suddenly stopped working. Never had this problem before and I actually never had any problems with this device ever. Whenever I turn on WIFI, it detects my home networks and other networks wherever I go but whenever I try to connect, it just shows saved secured, and sometimes authentication error after a couple of attempts. I have other WIFI devices at home and all are working perfectly. I tried forgetting the networks and I am positive that the WIFI password is correct. I tried to restore the device to facroty settings hoping that it would work. I tried accessing my router and I'm sure my device isn;t blocked. I even configured my routers to only accept the mac address of my device and block all others but still wouldn't connect. I tried rooting my device via odin but my device blocks root access and shows the error message "an application attempted to access system on your device without authorization. this attempt has been blocked.". I tried rooting it to try flashing custom roms. I also tried dialling *#0011# to configure my wifi but it still does not work. I don't think that the problem is my firmware because I had it for months and it didn't update before the issue occured. I was also about to try downgrading it to an ICS stock rom since I can't root it to try custom ROMs. I've been trying to fix this for days now. Can you guys give me a step by step instruction on how to fix this if it is at all possible? And maybe give me a link where I can download ICS or lower stock ROM's for this device. I think I have to use a TGY firmware, though I don't have an idea what it means. Thanks!
Wifi module
Maybe you've dropped your phone and the WIFI module loosened, and it can't work correctl?
riunoob1 said:
Good day,
I have a samsung galaxy s3 i9305 LTE and I have been using this device without problems for around 2 years now. It runs on Jellybean 4.3 baseband version i9305zhucnb1. It has been running on this firmware for a couple months now ever since it has been rolled out. The problem is, the WIFI suddenly stopped working. Never had this problem before and I actually never had any problems with this device ever. Whenever I turn on WIFI, it detects my home networks and other networks wherever I go but whenever I try to connect, it just shows saved secured, and sometimes authentication error after a couple of attempts. I have other WIFI devices at home and all are working perfectly. I tried forgetting the networks and I am positive that the WIFI password is correct. I tried to restore the device to facroty settings hoping that it would work. I tried accessing my router and I'm sure my device isn;t blocked. I even configured my routers to only accept the mac address of my device and block all others but still wouldn't connect. I tried rooting my device via odin but my device blocks root access and shows the error message "an application attempted to access system on your device without authorization. this attempt has been blocked.". I tried rooting it to try flashing custom roms. I also tried dialling *#0011# to configure my wifi but it still does not work. I don't think that the problem is my firmware because I had it for months and it didn't update before the issue occured. I was also about to try downgrading it to an ICS stock rom since I can't root it to try custom ROMs. I've been trying to fix this for days now. Can you guys give me a step by step instruction on how to fix this if it is at all possible? And maybe give me a link where I can download ICS or lower stock ROM's for this device. I think I have to use a TGY firmware, though I don't have an idea what it means. Thanks!
Click to expand...
Click to collapse
nope
I just charged it overnight and when i woke up, it just stopped working. where is the wifi module? the wifi does turn on and it detects wifi. it just doesnt connect. whenever i try to connect to a network, it shows saved, secured and sometimes authentication error.
riunoob1 said:
I just charged it overnight and when i woke up, it just stopped working. where is the wifi module? the wifi does turn on and it detects wifi. it just doesnt connect. whenever i try to connect to a network, it shows saved, secured and sometimes authentication error.
Click to expand...
Click to collapse
Maybe it's time for factory reset? I know that's the easy solution and most complicated but you should do it from time to time.
Sent from my GT-I9300 using XDA Free mobile app
Perform a complete factory reset
andjeomilosrdja said:
Maybe it's time for factory reset? I know that's the easy solution and most complicated but you should do it from time to time.
Sent from my GT-I9300 using XDA Free mobile app
Click to expand...
Click to collapse
Well, i think this may be the time to perform a complete factory reset ! try backing up your data and perform a complete factory reset.
nope
already tried factory reset, already flashed stock rom. already reset wireless router and the router is a non-issue because i tried on several networks.
riunoob1 said:
already tried factory reset, already flashed stock rom. already reset wireless router and the router is a non-issue because i tried on several networks.
Click to expand...
Click to collapse
Then it's a hardware problem.
Sent from my GT-I9300 using XDA Free mobile app
help
i decided to have it checked by a local technician and according to them, this was still a software issue. i dont know what to do anymore. they insisted that i should just keep flashing stock roms to fix these. already tried flashing the 4.3 tgy jellybean stock rom so i was thinking of flashing other version stocks. can anyone give e a good link where i can download tgy stock roms 4.1.2 or even ICS stock roms. I also am having problems with rooting the device. it gives me error message "an application attempted to access system on your device without authorization. this attempt has been blocked." after flashing autoroot in odin. my knox is not installed. thanks.
riunoob1 said:
i decided to have it checked by a local technician and according to them, this was still a software issue. i dont know what to do anymore. they insisted that i should just keep flashing stock roms to fix these. already tried flashing the 4.3 tgy jellybean stock rom so i was thinking of flashing other version stocks. can anyone give e a good link where i can download tgy stock roms 4.1.2 or even ICS stock roms. I also am having problems with rooting the device. it gives me error message "an application attempted to access system on your device without authorization. this attempt has been blocked." after flashing autoroot in odin. my knox is not installed. thanks.
Click to expand...
Click to collapse
If they think it's a software problem,why didn't they fix it?
Sent from my GT-I9300 using XDA Free mobile app
dont know
the first time i brought this to them is when i attempted to flash an incompatible firmware. they also did not fix it. they said they dont have any available stock rom for i9305 and told me to download and flash one. mayba im just gonna have to look for a different technician when i have free time. so for the mean time, im trying to look for other fixes. btw, i tried downloading a tgy 4.1.2 stock rom and it does not flash successfully. for now i'm thinking of rooting and flashing custom roms. but whenever i flash auto root. it gives me the error message "an application attempted to access system on your device without authorization. this attempt has been blocked.". i tried updating supersu still the same thing. i manually installed root checker and says it does not have root access and it shows the said error message again. what should i do with that? Thanks

Categories

Resources