Hi !
Guys please help me out !
I have a CWM Recovery 5.0.2.8 and when i try to backup my rom using backup and restore... CWM starts doing the backup...It backs up system ...but when it shows backing up data...it hangs and gets stuck at the end of backing up of data stage ...
The phone restarts after 5 minutes ...
Backup is not complete
In order to confirm whether there is any fault in the recovery i told some other persn t test it.
But he was successfully able t backup ... and the recovery showed backup complete message..
im using karbonn a21
Please help where is the fault !!!???
HELP PLEASE TILL NOW I CANT FIND ANY PROPER SOLUTION TO THIS !!!
RE:
check if any of the following holds true, then please correct it:
1. your phone might not be rooted (or rot access is not given to CWM)
2. you may have the wrong/corrupt clockworkmod (always check md5 checksum for verification).
if the problem persists, try the following:
-> run 'fix permissions' under the utilities menu of CWM recovery
-> reboot into recovery mode and do a cache/user data format.
hope that does it.
Cheers.
(Thumbs up if it works)
friendsub said:
check if any of the following holds true, then please correct it:
1. your phone might not be rooted (or rot access is not given to CWM)
2. you may have the wrong/corrupt clockworkmod (always check md5 checksum for verification).
if the problem persists, try the following:
-> run 'fix permissions' under the utilities menu of CWM recovery
-> reboot into recovery mode and do a cache/user data format.
hope that does it.
Cheers.
(Thumbs up if it works)
Click to expand...
Click to collapse
My phone is rooted!
what does fix permissions do exactly ?
ive tried factory resetting and then taking the backup but no luck !!!!
still gets stuck at the end stage of backing up data !
RE:
fix permissions, as the name suggests, fixes all the root permissions (if anything ever went wrong during rooting).
again, have you verified the md5 checksum of the cloclworkmod you downloaded?
friendsub said:
fix permissions, as the name suggests, fixes all the root permissions (if anything ever went wrong during rooting).
again, have you verified the md5 checksum of the clockwork you downloaded?
Click to expand...
Click to collapse
actually my phone is not on the CWM list on github..
its an unofficial CWM port
howw do i verify???
RE:
Nishchay1 said:
actually my phone is not on the CWM list on github..
its an unofficial CWM port
howw do i verify???
Click to expand...
Click to collapse
for example, say i downloaded a galaxy S II cyanogenmod for my Karbonn A7 from: download.cyanogenmod.org/?type=stable&device=galaxys2
you can see the md5sum written there.
after you've downloaded the mod,
you can check it's md5sum again by following this thread: androidforums.com/htc-droid-eris/138831-verify-your-files-md5-checksums.htm
friendsub said:
for example, say i downloaded a galaxy S II cyanogenmod for my Karbonn A7 from: download.cyanogenmod.org/?type=stable&device=galaxys2
you can see the md5sum written there.
after you've downloaded the mod,
you can check it's md5sum again by following this thread: androidforums.com/htc-droid-eris/138831-verify-your-files-md5-checksums.htm
Click to expand...
Click to collapse
Its showing page not found :/
And sorry i didnt get you
Tell me the proper procedure
EDIT : I tried fixing permissions but still no luck ! again it has got stuck on backing up data
RE:
Nishchay1 said:
Its showing page not found :/
Click to expand...
Click to collapse
prefix the addresses with www or http
that would do
or try this: www.md5summer.org/md5sum.zip
extract the files into a folder and use cmd to operate
www.md5summer.org/help.html
friendsub said:
for example, say i downloaded a galaxy S II cyanogenmod for my Karbonn A7 from: download.cyanogenmod.org/?type=stable&device=galaxys2
you can see the md5sum written there.
after you've downloaded the mod,
you can check it's md5sum again by following this thread: androidforums.com/htc-droid-eris/138831-verify-your-files-md5-checksums.htm
Click to expand...
Click to collapse
And my CWM doesnt even reaches the generating MD5 Checksum step...
it hangs on backing up data and then reboots after 5 mins ! :'(
RE:
Nishchay1 said:
And my CWM doesnt even reaches the generating MD5 Checksum step...
it hangs on backing up data and then reboots after 5 mins ! :'(
Click to expand...
Click to collapse
the md5 is not related to CWM.
it's the code generated for any specific file and is used to check whether a downloaded file is corrupted or not.
check it here: md5summer.org/help.html
friendsub said:
the md5 is not related to CWM.
it's the code generated for any specific file and is used to check whether a downloaded file is corrupted or not.
check it here: md5summer.org/help.html
Click to expand...
Click to collapse
My basic question is
1st: How would that help me in taking a backup anyway
2nd : You need some files to check the md5 sum of . Which files do i check the md5 sum of ??
EDIT : I have the correct CWM fr the phone ! Some other person tested it on his Karbonn A21 and he was succesful in taking backups !
Nishchay1 said:
My basic question is
1st: How would that help me in taking a backup anyway
2nd : You need some files to check the md5 sum of . Which files do i check the md5 sum of ??
EDIT : I have the correct CWM fr the phone ! Some other person tested it on his Karbonn A21 and he was succesful in taking backups !
Click to expand...
Click to collapse
I would try a different SD card. If you don't have one, try borrowing the friend's for whom your version of cwm succeeded. To be safe, you should make sure that there are at least 3GBs free space.
Related
i am using cynogenmod 7 on my sgs2 i backed up my rom via cwm recovery
i need to recover because all of my contacts were wipped and my pc crashed and had to format it so i lost the backup of my all contacts
so now i have this files in my backup folder
1- ".android_secure.vfat.tar " it is 605mb
2- "boot.img" it is 8mb
3- "data.ext4.tar" 887mb
4- "system.ext4.tar" 482mb
and wen i try to restore it shows md5 file missing and i have seen the posts which are there so i also tried it in terminal emulater i used the given commands but it did not work it said not found i tried adb shell it said not found
then at first su
it worked it gave me"#" this sign then again i did adb shell it showed again not found then i did the cd given codes in that also it said not found please help me
ps: i am new to all this so please help and please be as simple as u can
thank you in advance
CWM recovery should work if you have the exact same CWM recovery you used to backup with .
jje
Thanks but i already did that i used the same version of cwm recovery it is showing the missing files error
ralphrss said:
Thanks but i already did that i used the same version of cwm recovery it is showing the missing files error
Click to expand...
Click to collapse
Try creating a blank nandroid.md5 file with notepad and then place the same in the backup folder and then try restoring backup.
hope this helps!
ksantoshh said:
Try creating a blank nandroid.md5 file with notepad and then place the same in the backup folder and then try restoring backup.
hope this helps!
Click to expand...
Click to collapse
how do i do that exactly please give me some pointers and my note pad does not have the option of md5 files if u have it can u make me a copy of blank nandroid or tell me how to make it please and thankyou
Try Copy MD5 to desktop open with notepad delete contents and close and save . jje
JJEgan said:
Try Copy MD5 to desktop open with notepad delete contents and close and save . jje
Click to expand...
Click to collapse
i am missing the md5 file
i only have the four files which are given above which is in the first post
so can you please tell me how to make the new md5 file
ralphrss said:
how do i do that exactly please give me some pointers and my note pad does not have the option of md5 files if u have it can u make me a copy of blank nandroid or tell me how to make it please and thankyou
Click to expand...
Click to collapse
just save as .txt then change the extension to md5 using file explorer or similar.
if you long press on a file in file explorer it should popup with some options. Select rename and change the extension from txt to md5
ozzy lion said:
just save as .txt then change the extension to md5 using file explorer or similar.
if you long press on a file in file explorer it should popup with some options. Select rename and change the extension from txt to md5
Click to expand...
Click to collapse
i will try it will let you know if it worked or not
worked like a charm
For future, you realize your contacts auto sync to gmail.....
Sent from my GT-I9100 using Tapatalk 2
Hi guys,
I currently have a Zopo ZP300 phone
I have no issues getting CWM to install or work, but when trying to create a rom backup things start to go funny.
Firstly, the backup takes hours to complete.. 2~3 hrs.
- I end up with :
boot.img approx 3.8 Gigs in size
cache.ext4.tar approx 17kb
data.ext4.tar approx 334 MB
recovery.img approx 3.8 Gigs
system.ext4.tar approx 386 MB
Secondly, when the backup completes, i am greeted with "Error while generating md5 sum"...
I have factory reset the phone, i have wiped all caches, Dalvik etc, etc... no luck.
I have also tried Terminal Emulator to generate a MD5 and end up with nandroid.md5 of 0 Kb in size which is useless..
Anyone ??
Get 4EXT recovery and you will never have any sort of problems installing or updating custom roms. Its free, constant updates, touch based interface, and easier to use than clockwork.
Sent from my HTC Desire using xda app-developers app
chico1620 said:
Get 4EXT recovery and you will never have any sort of problems installing or updating custom roms. Its free, constant updates, touch based interface, and easier to use than clockwork.
Sent from my HTC Desire using xda app-developers app
Click to expand...
Click to collapse
Is it compatible with ZP300 ?
Can you make backup with it ?
Cheers
Not sure about compatibility but yes you can make backups everything you do with clockwork you can do with 4EXT and more
Sent from my HTC Desire using xda app-developers app
chico1620 said:
Not sure about compatibility but yes you can make backups everything you do with clockwork you can do with 4EXT and more
Sent from my HTC Desire using xda app-developers app
Click to expand...
Click to collapse
Thx for the help but app not compatible
cheers
Ok.
I tried again to make a backup, but again i get "could not generate md5 file" error.
So now i tried to make md5 using ABD and md5sum command, but i get "sh: md5sum: not found" error.
I also tried terminal emulator with same result..
Now what do i do ? Why do i get "not found" error ?
Is there another way to make md5 ?
I really need to make a reliable nandroid backup...
vvulture said:
Ok.
I tried again to make a backup, but again i get "could not generate md5 file" error.
So now i tried to make md5 using ABD and md5sum command, but i get "sh: md5sum: not found" error.
I also tried terminal emulator with same result..
Now what do i do ? Why do i get "not found" error ?
Is there another way to make md5 ?
I really need to make a reliable nandroid backup...
Click to expand...
Click to collapse
Recovery might be generating a corrupt md5.
Ok try this:
Code:
cd /sdcard/clockworkmod/backup/XXXXXX/
rm nandroid.md5
md5sum *.img > nandroid.md5
This should do the trick because the md5sum file must be named nandroid.md5
venoma333 said:
Recovery might be generating a corrupt md5.
Ok try this:
Code:
cd /sdcard/clockworkmod/backup/XXXXXX/
rm nandroid.md5
md5sum *.img > nandroid.md5
This should do the trick because the md5sum file must be named nandroid.md5
Click to expand...
Click to collapse
Thx so much for replying venoma....
Since posting this, i found another thread ( post #112 ):
http://forum.xda-developers.com/showthread.php?t=714114&page=12
It actually generated a MD5 file. :laugh:
Now, as i type, i started a recovery process to test, and so far so good.
Cheers :good:
**UPDATE**
Restore completed successfully !! Yay !! :good:
Big thank you to those that helped...
Where to find a working clockworkmod recovery for the ZOPO ZP300?
THank you!
blackspawn2 said:
Where to find a working clockworkmod recovery for the ZOPO ZP300?
THank you!
Click to expand...
Click to collapse
There ---> http://bbs.zopomobile.com/forum.php?mod=viewthread&tid=21332&highlight=卓普ZP300
The site is in Chinese but Google translate is your best friend. Also, you need to register in order to get the app.
ALso, the app is in Chinese, but the menu structure of CWM is the same as the english version of CWM.
Cheers
vvulture said:
There ---> http://bbs.zopomobile.com/forum.php?mod=viewthread&tid=21332&highlight=卓普ZP300
The site is in Chinese but Google translate is your best friend. Also, you need to register in order to get the app.
ALso, the app is in Chinese, but the menu structure of CWM is the same as the english version of CWM.
Cheers
Click to expand...
Click to collapse
Thank you for the answer.
I registered but i cannot download the app.
Can you please upload it on a file hosting server.
blackspawn2 said:
Thank you for the answer.
I registered but i cannot download the app.
Can you please upload it on a file hosting server.
Click to expand...
Click to collapse
Done..
http://www.4shared.com/rar/QkXmiU4j/zp300_120621_cmw_recovery.html
UPDATED 29/7/2012 with new download link
vvulture said:
Done..
http://www.4shared.com/rar/9-56_6Xx/zp300recovery-20120622__1_.html?refurl=d1url
Click to expand...
Click to collapse
Thank you so much!
blackspawn2 said:
Thank you so much!
Click to expand...
Click to collapse
Can you please explain to me how to flash it???
thanks
ya-big said:
Can you please explain to me how to flash it???
thanks
Click to expand...
Click to collapse
There is now an official english version of CWM for ZP300
http://www.4shared.com/rar/QkXmiU4j/zp300_120621_cmw_recovery.html
Use this to flash : http://www.zopomobileshop.com/download/SP_Flash_Tool_v3.1206.01.rar
Cheers
Ok, using spflash i have already upgraded the official rom to the latest version, but i cant install this recovery in my zp300...whats wrong? is there a proper procedure for flashing this recovery?
BROM ERROR: S_DL_GET_DRAM_SETTING_FAIL (5054)
[EMI] Obtain DRAM Failed!
[HINT]: Please check your load matches to your target which is to be downloaded
help please
venoma333 said:
Recovery might be generating a corrupt md5.
Ok try this:
Code:
cd /sdcard/clockworkmod/backup/XXXXXX/
rm nandroid.md5
md5sum *.img > nandroid.md5
This should do the trick because the md5sum file must be named nandroid.md5
Click to expand...
Click to collapse
i'm coming up with the same problem, md5 sum stuff..
i'm on xperia play.
and how to do this?
Code:
cd /sdcard/clockworkmod/backup/XXXXXX/
rm nandroid.md5
md5sum *.img > nandroid.md5
i have to do this with terminal emulator?
md5sum: not found
I installed busybox but can not install md5sum.exe
please help me Xperia play r800x
Problem solved!
**********************
I think my problem happened because a flashed a ROM with MG4 baseband, and then flashed UltimaROM with another baseband which caused my baneband to corrupt.
I tried to flash Stock ROM and install different baseband but non of this worked.
finally I flashed BTU stock ROM (Which comes with MG4) but the problem still here.
Then I installed root, deleted the efs folder and replaced all the files with the files in the backup - restart and everything is working! my IMEI returned to normal.
**********************
Original question
Hello devs,
I have Siyah kernel which auto backup my EFS, i have backup named "efs_28Aug2013-1852.tar.gz"
I want to restore from this backup because I lost my IMEI when I flashed UltimaROM
I renamed it to "efsbackup.tar.gz" and put it in the root of the sdcard
then I started adb shell & run the code
Code:
su
umount /efs
mke2fs /dev/block/mmcblk0p1
mount -w -t ext4 /dev/block/mmcblk0p1 /efs
busybox tar zxvf /sdcard/ efsbackup.tar.gz -C /
I granted ADB shell root access
then i went to recovery and run the command (because I can't run umount /efs while device's running it gives resource busy message)
However when I run the first command "su" in gives me this message
Code:
/sbin/sh: su: not found
so I skipped to the next command
but I get the message
Code:
umount: can't umount /efs: Invalid argument
Please guys any help appreciated
Click to expand...
Click to collapse
Unzip it with a file manager and use a root explorer to replace manually
Sent from my GT-I9300 using Tapatalk 4
.
I've backup my efs with adb but how do you have a file on tar format, i've got a file on .img, it's normal ?
There's about nine different ways to backup the efs, .img is fine but a little on the large side at 20mb. A .tar of the same is only 5mb.
rootSU said:
Unzip it with a file manager and use a root explorer to replace manually
Sent from my GT-I9300 using Tapatalk 4
Click to expand...
Click to collapse
Thank you for your reply, I did as you said but this only changed my IMEI from "Unknown" to the generic IMEI "004999..."
Is there something wrong in the method or my backup may be corrupt
Sent from my Nexus 7 using Tapatalk 2
Read the imei / efs thread in general.
Sent from my GT-I9300 using Tapatalk 4
Thank you again, I read the thread in the past but it looks like it has been updated recently.
I think my problem happened because a flashed a ROM with MG4 baseband, and then flashed UltimaROM with another baseband which caused my baneband to corrupt.
I tried to flash Stock ROM and install different baseband but non of this worked.
finally I flashed BTU stock ROM (Which comes with MG4) but the problem still here.
Then I installed root, deleted the efs folder and replaced all the files with the files in the backup - restart and everything is working! my IMEI returned to normal.
Thank you RootSU for your help.
hey bro,
i am stuck
help me out
- my efs(folder) is blank
- i installed stock with pit file but no help!
- right now my cell is in bootloop!
- it goes to recovery, download mode.
i have efs.tar.gz file and a folder named efs in my ext sd
how do i copy that to int memory?
can't even create a cwm flashable zip file of the same?????
help me bro.....
You are posting in a thread that tells you how to restore an efs backup, how much more could you possibly need?
Go to recovery, factory reset.
Get the phone to boot, unpack the .tar file and follow the instructions in the OP.
boomboomer said:
You are posting in a thread that tells you how to restore an efs backup, how much more could you possibly need?
Go to recovery, factory reset.
Get the phone to boot, unpack the .tar file and follow the instructions in the OP.
Click to expand...
Click to collapse
Dear boomboomer,
i am sorry, but my phone is in "bootloop" how am i suppose to delete the "EFS" ? that s what i am asking!!!!!
i have both efs.tar.gz and extracted folder ready in my ext-sd......
i wonder if somebody can help me with creating a cwm.zip from the .tar file
thanks ....
try to install stock again via odin but this time install a diffrent version (for example if you installed INU this time try INS).. before that factory reset your phone and wipe cache via recovery mode.. don't lose your efs backup it's very important copy it to your PC in case something wrong happens
i already did so
almousawi said:
try to install stock again via odin but this time install a diffrent version (for example if you installed INU this time try INS).. before that factory reset your phone and wipe cache via recovery mode.. don't lose your efs backup it's very important copy it to your PC in case something wrong happens
Click to expand...
Click to collapse
bro, thanks for your help recently i tried cm 10 also but nothing happened.
believe me i tried everything now the only option is left that is
to restore efs backup from efs.tar.gz (which is about 12 MB)
OR
create a cwm flashable zip from the efs folder which is about 22 MB)
OR
take my phone to download mode and try to push whole "efs" folder to the location with help of "ADB"
hello
mikks said:
bro, thanks for your help recently i tried cm 10 also but nothing happened.
believe me i tried everything now the only option is left that is
to restore efs backup from efs.tar.gz (which is about 12 MB)
OR
create a cwm flashable zip from the efs folder which is about 22 MB)
OR
take my phone to download mode and try to push whole "efs" folder to the location with help of "ADB"
Click to expand...
Click to collapse
hello nobody is here to help......??????
mikks said:
hello nobody is here to help......??????
Click to expand...
Click to collapse
Correct this is not a paid for service .
Suggest you take it to a service centre .
know that i did that already....
JJEgan said:
Correct this is not a paid for service .
Suggest you take it to a service centre .
Click to expand...
Click to collapse
thanks for the reply, respect to your reply and interest no disrespect ...
i took that to the center but they failed and by the way they come to me in some cases... so they give me free service...
my phone is in boot loop, i have efs.tar.... can i use phills recovery ????? or can i use someone elses backup... just to boot up my device ...then i'll be good .... i just need to get my device booted up.....
Dears,
I've received the OTA_T6_UL_K44_SENSE55_MR_HTC_Europe_2.61.401.3-1.54.401.1_release update, and integrated it with my ROM, and I backed it up via TWRP recovery (System/Boot)
if you want to try it , your MAX must be GSM ,it is fully functional, and stock /unrooted and without any modifications.
And it requires few simple step to install it :
1- download the file ( https://www.dropbox.com/s/r1yctvgu68jxomh/2014-03-26--18-11-42 KOT49H release-keys.zip )
2- Extract it
3- Put it in TWRP backup folder on your SDcard ( TWRP/BACKUP/FA3NK..../
4- Full wipe/ format system/ clear cache /
5- Restore
6- Enjoy!
Edit : here is the new link :
https://drive.google.com/file/d/0B8V0bDSmDRB8a2hpZkpQcF9VS1k/edit?usp=sharing
thanks .. but can you reup it somewhere else ?
link doesnt work atm
B-Man2005 said:
thanks .. but can you reup it somewhere else ?
link doesnt work atm
Click to expand...
Click to collapse
I will try to upload it somewhere else during the day , and will post the link..
mkhader said:
I will try to upload it somewhere else during the day , and will post the link..
Click to expand...
Click to collapse
i need your comfirmation to download
B-Man2005 said:
i need your comfirmation to download
Click to expand...
Click to collapse
try now , it should be fine right now
very nice thanks
but could you also upload the system\lib filder in a zip ??
i only need those files
Thanks for sharing this! Fast download from Google Drive!
Thanks for sharing this! Fast download
problem
Dear uploader.. I followed the instructions but after doing it my screen doesn't go beyond HTC logo it stucks
mumtaz0786 said:
Dear uploader.. I followed the instructions but after doing it my screen doesn't go beyond HTC logo it stucks
Click to expand...
Click to collapse
use twrp-2.6.3.0 to restore the rom
2nd problem
Dear uploader, I have installed this Rom the way you guided but problem is about platform.xml .. when I used other kit Kat custom Rom I edited permission for write external sd card but this Rom when I changed platform.xml it changes for a while but after restart it came back to default. It is rooted everything working but file doesn't change and I can't write anything on sdcard.
Im having problems doing this.. what is the exact backup folder location to restore??
young blade said:
Im having problems doing this.. what is the exact backup folder location to restore??
Click to expand...
Click to collapse
make a backup of your own rom.
check sd card
there is a folder... i think twrp
in there there will be a backup folder
in there, there will be another one... pretty cryptic ... for me its something like DHSFSFS01
in there there is your backup... you can delete it if you want or keep it
copy the folder of the rom from this thread to DHSFSFS01 or what its called on your phone...
now back in recovery you can restore both... your rom and the one you downloaded
B-Man2005 said:
make a backup of your own rom.
check sd card
there is a folder... i think twrp
in there there will be a backup folder
in there, there will be another one... pretty cryptic ... for me its something like DHSFSFS01
in there there is your backup... you can delete it if you want or keep it
copy the folder of the rom from this thread to DHSFSFS01 or what its called on your phone...
now back in recovery you can restore both... your rom and the one you downloaded
Click to expand...
Click to collapse
Okay so it has to be in the external SD.. thanks!!:good:
Dear uploader help me
Dear uploader, I have installed this Rom the way you guided but problem is about platform.xml .. when I used other kit Kat custom Rom I edited permission for write external sd card but this Rom when I changed platform.xml it changes for a while but after restart it came back to default. It is rooted everything working but file doesn't change and I can't write anything on sdcard.
mumtaz0786 said:
Dear uploader, I have installed this Rom the way you guided but problem is about platform.xml .. when I used other kit Kat custom Rom I edited permission for write external sd card but this Rom when I changed platform.xml it changes for a while but after restart it came back to default. It is rooted everything working but file doesn't change and I can't write anything on sdcard.
Click to expand...
Click to collapse
That means the system partition is write protected.
You will need to edit the file and flash it in recovery for the changes to take.
reply to dear uploader
scrosler said:
That means the system partition is write protected.
You will need to edit the file and flash it in recovery for the changes to take.
Click to expand...
Click to collapse
I know how to edit but how I can flash platform.xml file through recovery???
Can someone running this do me a favor?
adb pull /proc/config.gz
After you have it can you link me to it? Thanks...and good things come to those who help
Hello Everybody,
I'm new to this forum and I hope posted this in the right section.
I have a Coolpad F1 TD-SCDMA. Today I flashed a custom ROM but I want my original ROM back.
So I wanted to restore the backup I earlier made today. When I am in CWM and choose restore it gives me: MD5 Mismatch!
I went to check for it in the directory but i didn't see any .md5 file.
Here is a guide for a similair problem, but since I am new to this and as he said in the topic: he ported it for One V. I am not sure if it will work.
I hope someone can help me with this.
Thanks in advantage!
HarlemOrange said:
Hello Everybody,
I'm new to this forum and I hope posted this in the right section.
I have a Coolpad F1 TD-SCDMA. Today I flashed a custom ROM but I want my original ROM back.
So I wanted to restore the backup I earlier made today. When I am in CWM and choose restore it gives me: MD5 Mismatch!
I went to check for it in the directory but i didn't see any .md5 file.
Here is a guide for a similair problem, but since I am new to this and as he said in the topic: he ported it for One V. I am not sure if it will work.
I hope someone can help me with this.
Thanks in advantage!
Click to expand...
Click to collapse
Yea, that SHOULD work.
Just tried it when typing in: 'adb shell' in cmd I get: 'error: device not found'.
Drivers are installed I think, I can see the files on my phone of my SD and emulated SD card.
Any suggestions?
Edit: It WILL find my device when turing on Mass Storage (MTP) instead of charging only.
I tried this using MTP.
Code:
# cd /sdcard/clockworkmod/backup/2014-10-08.08.47.17/
# rm nandroid.md5
# md5sum *img > nandroid.md5
Then I went back to CWM to restore the backup but still the MD5 mismatch.
Edit:
I wonder how this MD5 mismatch error even started.
HarlemOrange said:
I tried this using MTP.
Code:
# cd /sdcard/clockworkmod/backup/2014-10-08.08.47.17/
# rm nandroid.md5
# md5sum *img > nandroid.md5
Then I went back to CWM to restore the backup but still the MD5 mismatch.
Edit:
I wonder how this MD5 mismatch error even started.
Click to expand...
Click to collapse
Did you start with adb shell while connected in MTP? Did you look with a file manager to see if it is creating the md5 file? Did you try Method 3 with busybox? As far as what causes it, it's explained in the first post of that thread.
es0tericcha0s said:
Did you start with adb shell while connected in MTP? Did you look with a file manager to see if it is creating the md5 file? Did you try Method 3 with busybox? As far as what causes it, it's explained in the first post of that thread.
Click to expand...
Click to collapse
Thanks for the response. First I started try with charge only. When that didn't work I start with adb shell whil connected in MTP.
Yes, but unfortunatly it isn't. No, did not try method 3 yet.
But I did try this. It is the same method but without adb. But as you can see in the other topic:
HarlemOrange said:
When I try the following command:
Code:
#cd /sdcard/clockworkmod/backup/2014-10-08.08.47.17
I get this:
Code:
No such file or directory
Did it like 3/4 times now and I'm pretty sure I did not make mistakes when typing.
Click to expand...
Click to collapse
Looks like this (third paragraph) is the problem: Not enough space to finish the backup. I will install the sotck rom shortly and try to restore the data.