I just bought this thing today.
Get home and install CWM and Root.
Try to install LiquidSmooth.
Now it won't turn on. I plug in to my PC while it's "off" and i hear windows "connected" sound then the "disconnected" sound and repeated "you need to format D: " every 5 seconds.
Tried booting in to recovery and ODIN mode and nothings working.
I seriously was so ****ing excited to get this and now I have a ****ing 5" paperweight.
What the ****.
Brand new phones need to be on the charger for several hours on the first charge. Perhaps you flashed when the battery was too low. Just plug into wall outlet using the factory charger for several hours.
Well I bought it used but it was working when I bought it. It was on stock and I decided it needed jellybean... Now its problems all the way.
I mounts and repeatedly asks to be formatted so my fingers are crossed that its fixable.
I am a long time Note user and I have flashed 20+ times. Recently I flashed LiquidSmooth and it hard bricked my phone too. Exactly the same issues you describe. I had it insured so I took it to Geeksquad(bestbuy) for repair. They simply replaced it.
Looking here today it seems like I could have bought an adapter to get into download mode.
Part 5: De-brick
http://forum.xda-developers.com/showthread.php?t=1586223
Sounds like you may have flashed a version of the rom that was for a different phone. If that is the case and it is showing no signs of life you will most likely need JTAG. mobiletchvideos has a service its about 60 bucks and he has a good reputation.
So apparantly it is easy to make your own jig using simply a microusb connector and 3x100ohm or 1x300ohm resistor. Can get a 5pack of 100ohmers for $1 at radioshack and will find a microusb connector i can solder up and hope for the best.
which liquid smooth rom did u use for the n7000 or i717
imranh101 said:
So apparantly it is easy to make your own jig using simply a microusb connector and 3x100ohm or 1x300ohm resistor. Can get a 5pack of 100ohmers for $1 at radioshack and will find a microusb connector i can solder up and hope for the best.
Click to expand...
Click to collapse
100Kohms not 100.
that is a total 300,000 ohms compared to your 300
Quite the difference
Also the tolerance on certain samsung devices vary so you may need a 1kohm in there as well , i have a captivate I built the jig for that jig also works on my note. Bit on my brother in law's sgs2 (which a jig is supposed to reset the flash counter as well as force dl mode) it does nothing.
But given the symptoms it sounds like you flashed a rom for the international note... I which case a jig will do nothing And bobby's(RQuiett) answer is the only course of action.
Any idea on what AT&T would do if I went to a local store and told them "I bought it off a friend and was using it and there was an OTA update and it just stopped working!"?
Don't do that. You messed up. Take your lump and pay the price for your mistake.
What you are proposing is fraud. Plain and simple.
This is a result of something YOU did, not a flaw or defect in the manufacturing of the hardware nor a result of an official software update, Which aren't even done OTA anyway you have to use kies.
That is what makes carriers and manufacturers want to lock down devices, do you want at&t to go the way of Verizon and force locked bootloaders on every device?
Not to mention... If you "bought it from a friend" they would care less about your problem.
imranh101 said:
Any idea on what AT&T would do if I went to a local store and told them "I bought it off a friend and was using it and there was an OTA update and it just stopped working!"?
Click to expand...
Click to collapse
Just based on the" bought it from a friend" phrase, they'd say "sorry.... you wanna buy a new one?" lol
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Welp... Mobiletechvideos repair is ordered... Will be shipping it out tomorrow... if I ship it out at like 10-11AM tomorrow morning what time do yall think I might get it back? I'm guessing next Monday?
I'm putting money on 4:17 pm Tuesday.
TUESDAY? How damn long does it take for them to open the package plug in a jtag and click a button? Shipping isn't that slow!
imranh101 said:
TUESDAY? How damn long does it take for them to open the package plug in a jtag and click a button? Shipping isn't that slow!
Click to expand...
Click to collapse
Patience. You are purchasing a service from someone who has other orders to fill. Plus no one knows anything about when mobiltechvideos will do the work other than mobiletechvideos.
Obviously a lot longer than it takes to load a rom on a card and brick it.
Sent from my SAMSUNG-SGH-I717 using Tapatalk 2
I read where Samsung is going to start doing something to start making their phones harder to brick and more user friendly for us. They need to do like computer motherboard makers and add a 2nd bios or the likes. People like us do like to play with our phones. So, yes I will be happily making a warranty claim and waiting for my repaired or replaced phone.
I wish mobile motherboards to become like computer boards.
Never go for htc...crap hardware
Sorry. Patience is a bit thin when I've just bought a phone for 250 Then had to pay another 50 and wait a week to use it.
sholsten said:
I read where Samsung is going to start doing something to start making their phones harder to brick and more user friendly for us. They need to do like computer motherboard makers and add a 2nd bios or the likes. People like us do like to play with our phones. So, yes I will be happily making a warranty claim and waiting for my repaired or replaced phone.
Click to expand...
Click to collapse
Are you kidding me dude?
"it's their fault I'm stupid and can't read I have no problems committing fraud and having it fixed on their dime"
They are already pretty hard to brick ff just follow instructions and only flash things built for this device... When trying to make something idiot proof you'll always Just find a bigger idiot.
Related
My Vibrant is completely bricked. I turn it on and the picture of the phone, exclamation point, and computer shows up.
I can't enter any mode, recovery or download. I've tried everything already.
Question is, should I attempt to make that resistor jig thing or should I just go to T-Mobile and get a replacement with my warranty? Which one is less of a headache?
Warranty totally its easier
Sent from my SGH-T959 using XDA App
Alanrocks15 said:
Warranty totally its easier
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Okay thanks!
I had that image/brick as well, there is a guide in the bible that showed me how to fix it. I would provide the link but I am not at my computer...
Basically pull battery, plug in the USB to the phone and computer, hold volume up and down and power.
Re-insert the battery
When the phone goes black release the power button...
Check the bible, the thread is there...
Hopefully those steps work for you as well.
Sent from my SGH-T959 using XDA App
I say build the jig. I did, and it was painless. Plus, if you happen to brick again, youve got a damn good chance of saving it. Its a valuable tool to have. Once you get it built, you can have your phone back exactly as it was before within the hour (for me at least), assuming you made a backup at some point.
some people may not want to build a jig?
i did and it was painful since i was new to everything but now it is like moderate
but the warranty will give u a new phone???
does anyone not see the bright side on this?
It's hardware locked too, by the way. So I can't really do anything about it unless I get a replacement or make a jig.
Thanks for the input.
have you tried pulling the battery, holding up and down and then plugging in usb?
mo0se said:
have you tried pulling the battery, holding up and down and then plugging in usb?
Click to expand...
Click to collapse
Yeah, I've pretty much tried everything. It's all locked up, software and hardware. I screwed it up pretty bad...
Alanrocks15 said:
some people may not want to build a jig?
i did and it was painful since i was new to everything but now it is like moderate
but the warranty will give u a new phone???
does anyone not see the bright side on this?
Click to expand...
Click to collapse
Yes, but theres also a bright side to learning new, useful things.
Also, while I understand it will get him a new phone, the warranty is void once you've rooted your phone. Sure, T-mobile isnt going to take any direct action and just send him a new phone, but the fact of the matter is, they know people do this. This is exactly why you are seeing a lot of new Android phones lately that have measures in place to prevent rooting.
I dont know in what way it was painful for you, but I also had never touched a soldering iron in my life before this, and it really wasn't that hard. Honestly, I feel like if your going to be messing around with your phone to the point that you brick it, you should take some responsibility and learn how to fix it before making someone else pay for it. I had a very similar problem to the OP, and I learned how to fix it myself, and now I feel much better equipped for any issues that may come in the future.
since you asked by posting this thread, my opinion:
you bricked the phone right? yourself; no one else, not t-mobile? Assuming so, make the jig and take responsibility.
all of these people bricking their phone and then using the warranty (not talking about insurance some pay for) are part of the reason phones are the price they are. and they are likely to go up
so do everything you can to fix the phone yourself instead of lying and getting a replacement for free
this is probably not what you want to hear, but you posted on a forum asking for opinions. take responsibility for your own actions as I dont want to pay (end the end we will all pay higher phone prices) for your mistakes
good luck
kboater said:
since you asked by posting this thread, my opinion:
you bricked the phone right? yourself; no one else, not t-mobile? Assuming so, make the jig and take responsibility.
all of these people bricking their phone and then using the warranty (not talking about insurance some pay for) are part of the reason phones are the price they are. and they are likely to go up
so do everything you can to fix the phone yourself instead of lying and getting a replacement for free
this is probably not what you want to hear, but you posted on a forum asking for opinions. take responsibility for your own actions as I dont want to pay (end the end we will all pay higher phone prices) for your mistakes
good luck
Click to expand...
Click to collapse
Very well said. I think the OP has a sense of responsibility, since he even considered the jig as an option.
I think the lesson is that nothing is free, and we all pay the price in some form or another.
I actually decided to order the jig materials online tonight since I'm not really in a rush to have my phone restored right away. Work seems to be dull, so I probably won't be getting any calls for meetings.
Sounds good man, hope it works out great for you. I was in the same boat, for a different reason. My phone couldnt handle overclocking, froze during a flash, and then I find out my phone is hardware locked. I bought my phone from craigslist though so I didnt even have the option of a warranty replacement.
Either way, now youll have a life-saver if you ever brick it again, and for any other Vibrant you may have down the line.
Hi guys, my phone is flashed so I guess that will make this whole process painful...
But here is the story, I have omega version 12.1 I think (maybe 11 or 13) it has been on my phone for 1 + months now, so I am fairly certain it isn't anything to do with firmware. Phone wont turn on, wont go into download mode or anything. I have tried taking the battery out and leaving it out for 5 minutes, still nothing.
It was working fine before I went to bed, had 10 percent battery and was just on home screen when I put it on charge, not in app or anything. Then seems to be hard bricked after waking up, so happened sometime overnight.
I am not with a carrier, brought it locally outright at my local consumers electronics store (JB-HI-FI)
Since it is hard bricked to the point it wont turn on in download mode does that mean there is no way for them to know it is flashed unless they fix it (in which all is ok)?
Never done a warranty return, do I just take it into store and they send it off? How long will this take?
On top of all this I cut my old sim doown using a cutting template, and it appeared to slide in fine, but after trying to remove it today the push eject isn't working, and tips to get this out, doesn't appear to be enough room to grip it with tweesers.
Thanks.
So as we keep on saying in all posts, the next step u have to make is try with an usb jig.
U know what is that?
xopito_cc said:
So as we keep on saying in all posts, the next step u have to make is try with an usb jig.
U know what is that?
Click to expand...
Click to collapse
No, have never heard of one. Just talked to samsung live chat and they said to have a proper diagnostic to take it down to a service centre, would anyone recommend this, or try this jig thing first?
Nicholas68 said:
No, have never heard of one. Just talked to samsung live chat and they said to have a proper diagnostic to take it down to a service centre, would anyone recommend this, or try this jig thing first?
Click to expand...
Click to collapse
Since it's already harbricked, i'd say just turn it in and let Samsung fix it for you. It is under warranty, and last time i brought in my i9000 that I bricked, they just replaced the phone. the jig is ok only if you already know where to get one or how to make one, but if you have to go out of your way for it, just use the warranty.
Sent from my LG-LU6200 using xda premium
JiroPrinz8 said:
Since it's already harbricked, i'd say just turn it in and let Samsung fix it for you. It is under warranty, and last time i brought in my i9000 that I bricked, they just replaced the phone. the jig is ok only if you already know where to get one or how to make one, but if you have to go out of your way for it, just use the warranty.
Sent from my LG-LU6200 using xda premium
Click to expand...
Click to collapse
Ok, Think that is best, can't really go without phone for 2-3 weeks while waiting for a JIG to arrive.
Just a few questions about the service centre, do you think they will ask me if I have flashed the phone? Cause I'm afraid they will think the brick was caused by that (could be) but probably unlikely since it died during the night a month after its latest flash.
If they do get it working will they go in and check the flash counter? Then what happens?
And lastly, if they ask me if I have flashed it should I lie and say no?
Thanks for the help.
I ordered my jig from ebay from overseas but it arrived in a few days.
I am in Melbourne city btw, pm me if you are too. I can lend you mine.
Sent from my GT-I9300 using xda app-developers app
priyana said:
I ordered my jig from ebay from overseas but it arrived in a few days.
I am in Melbourne city btw, pm me if you are too. I can lend you mine.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Nope brisbane here, thanks for the offer though. What would the chances be of a JIG fixing it though, cause I have a feeling the mainboard has died. Kinda wish I didn't turn off the red LED charging light, apparently some others who's phones hardbricked the light still turned on showing some sign of life.
Any suggestions on sorting out the micro sim card issue now, assume I have to get it our before taking it to service centre, or just leave it in for them to fix?
priyana said:
I ordered my jig from ebay from overseas but it arrived in a few days.
I am in Melbourne city btw, pm me if you are too. I can lend you mine.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Does the jig work on s3? I have an old one from s2 and if I'm not wrong is not working on s3...
Sent from my GT-I9300 using Tapatalk 2
ceo.mtcl said:
Does the jig work on s3? I have an old one from s2 and if I'm not wrong is not working on s3...
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
-it will force the S3 in download mode
BUT
-it will not reset the flash counter like with S2
Got a little bit of good news, this might help other people out with jammed sim cards, NO damage and worked like a treat.
In the top of the sim card holder down the bottom left there is a little circle around one mill wide, got a sharp thumbtack and pushed it gentelly into the sim card, the just applied a little pressure and the sim card started to slide up, was very easy, had a great grip on the sim cad and no damage done trying to grab it with needle nose pliers like I read elsewhere, now to get the phone replaced or unbricked.
Thinking about it more I think it is a hardware fault, cause I had flashed the correct version of omega for international S3, I havn't had any wrong signs like freezing or crashing, been working flawlessly for over a month, then out of the blue completely dead. So I think I will just go into the service centre and tell them I suspect the motherboard has died, or the charger port (didn't charge over night), dont have a spare battery to test with though).
http://lifehacker.com/5940308/save-a-bricked-phone-using-paper-clips-and-pencil-graphite
Just a post tyat i found today..not sure if it ll work or not.
Sent from my GT-I9300 using xda app-developers app
That video is pretty cool, don't have an old connector to try it, but seeing as my phone didn't hard brick from a flash going wrong while flashing or wrong firmware or anything I have a feeling a JIG or similar wont work. Would try it if I had the connector though.
How often do batterys and charger ports fail, cause that could be another reason I guess.
Nicholas68 said:
Ok, Think that is best, can't really go without phone for 2-3 weeks while waiting for a JIG to arrive.
Just a few questions about the service centre, do you think they will ask me if I have flashed the phone? Cause I'm afraid they will think the brick was caused by that (could be) but probably unlikely since it died during the night a month after its latest flash.
If they do get it working will they go in and check the flash counter? Then what happens?
And lastly, if they ask me if I have flashed it should I lie and say no?
Thanks for the help.
Click to expand...
Click to collapse
Exactly. There were no problems with the flashing part, i think ypu have a hardware issue.
They didn't ask me anything really, just asked what happened prior to the phone dying.
But i was ready to lie my ass off.. lol!
Dont say anything about flashing. They wont even bother trying to flash the phone if they dont get it into download mode.
Sent from my LG-LU6200 using xda premium
JiroPrinz8 said:
Exactly. There were no problems with the flashing part, i think ypu have a hardware issue.
They didn't ask me anything really, just asked what happened prior to the phone dying.
But i was ready to lie my ass off.. lol!
Dont say anything about flashing. They wont even bother trying to flash the phone if they dont get it into download mode.
Sent from my LG-LU6200 using xda premium
Click to expand...
Click to collapse
Ok, thanks for the info, I've tried everything besides a JIG to try get it into a download mode, so I doubt they will get it into download mode, Ive seen a couple of other cases where the S3 has had a mainboard issue, only other thing is in the last week I have been using the wall charger where as I normally use the computer and usb, so not sure if this could link to it though, might have got a power surge, but had no storms in months so unlikely and the fuse box is modern with pretty good protection. Ill just go in and tell them it was working one night, and dead when I woke up the next morning, which is the truth. And if they ask if its flashed, ill miss understand them and say, not the screen wasn't flashing/flickering when it died, I was asleep
Reality is though if they get the phone to a restored point to where they can see the flash counter, then I no longer need their help to fix it.
One more question. At the service centres do they try fix it while I'm there, or do they tell s to come back in a few hours, or do they ring a few days later. And if they can't get it in download mode do they normally give you a replacement there? Or do they ship it off to get parts replaced and then ship it back taking weeks/months?
Thanks
I'd give the jig a chance. Just imho.
Btw it is very likely that the jig would arrive in, like, 24-48 hours if you choose the right seller, while other users already told you it's probably gonna take more then a few days (probably from 2 weeks to a month) for samsung to "close the ticket". In my experience only with apple you'd be up and running in less then a week.
Nicholas68 said:
One more question. At the service centres do they try fix it while I'm there, or do they tell s to come back in a few hours, or do they ring a few days later. And if they can't get it in download mode do they normally give you a replacement there? Or do they ship it off to get parts replaced and then ship it back taking weeks/months?
Thanks
Click to expand...
Click to collapse
I'm sure they will ask you to come back in a few days or even weeks. Don't think they will replace new unit for you. They will just replace the faulty part.
Sent from my GT-I9300 using xda app-developers app
I have the same issue so thought i would post here rather than starting a new thread.
Here's the story for mine. Working fine on current rom for about a month no issues at all. Today battery got to about 9% then switched off and i haven't been able to get it to turn on again, no download mode,no recovery, no charging led nothing at all.
I had to change my screen a couple of days ago, has been working fine with the broken screen for months, have i now voided my warranty?
A lot of faulty s3 i think... My s3 suddenly died last night. Battery is around 90+. Check the phone and it's not responding. Power button doesn't work. Doesn't even go to download mode or recovery mode. I'm running on stock ICS with root only. Sad part is I don't have any access for a jig right now. So can't test it. Bought this phone in SG and I'm in the Philippines right now. Warranty is good for SG only. Dec would be my next trip back to SG. By then no S3 as of now. For a phone I'm getting depressed LOL!
over the air jellybean brick my phone unrooted unflashed phone
BEWARE EVERYONE!! when updating to jellybean some do go very wrong! not all! but some do!! and it will brick your phone!! i updated over the air.. and for a few days. my phone kept on freezing! and locking up! one night i went to bed woke up and the phone was stuck on the boot screen! i thought thats weird took battery out, put back in, as ya do.. nothing took sim out and back in nothing... so only option was to reapair it through kies. put serial in and model number in it found the sortware. i downloaded it. told me to put phone in recovery mode.. so i did,kies said it was gonna install it to my phone.. but everytime it tryed to install it kept on saying it couldnt find my phone.. i tryed this all day long used different usb ports. different computers. to know avail, so my only option was to take it in for repair.. so i took it back to phones 4 u! they sent it away, i waited over 2 weeks! which was undiscrible it was like i lost my right arm with no phone! as you can imagine.. than the repair center turned round and said that the phone has been rooted! which it hadnt!! and they said this in order to brake the terms and conditions of my warentee so phones 4 u can get out of giving me a new handset. so they all save money!! i wouldnt do that to a 500 pound phone!! the phone does everything you could want from a phone! im launching a full investigation into this matter.. and have writen a formall complaint to phones 4 u headoffice, and will be contacting trading standards, ofcom, watchdog, and the ombudsman, and plaster it on all the forums ,social networking sights i can think of, to give them as much bad press as possible!! untill my problem is resolved and i will restore there name and clear it once they have done the right thing by me
I am afraid I can also report a bricked S3 here.
Rooted two weeks ago, but did not yet install a rom. Didn't Triangleaway yet aswell.
Same problem as described, I was browsing the net, and suddenly, screen went black (off). Could not get it powered on anymore. (nor in download/recovery mode)
So i brought it to the local telecom service center of my office, they could tell me the battery was fine and the buttons were working but they never saw one in this state.
So they are sending it to a samsung repair company.
This was two days ago, heard nothing yet, but I am very curious if I will get repaired or if I need to pay because of the rooting.
Will post the result if I know more.
Does anyone know if this problem also happens to people who did not root?
Bought one, but have to wait till it ships, so figured I would ask if anybody in the 757 has a mini-usb jig that I could use to get my Note into download mode. Send PM if you do.
Thanks in advance.
U can reboot into download thru recovery
Sent from my SAMSUNG-SGH-I717 using xda premium
mrstone77 said:
U can reboot into download thru recovery
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
Walk me through that one, no response to anything, power and up volume results in nothing. Plugging into usb results in nothing Windows, ODIN nor Kies registers it.
vanemburghj said:
Bought one, but have to wait till it ships, so figured I would ask if anybody in the 757 has a mini-usb jig that I could use to get my Note into download mode. Send PM if you do.
Thanks in advance.
Click to expand...
Click to collapse
I think this is what you're looking for, yes?
http://galaxys2root.com/tag/diy-usb-jig/
Sidenote:
I thought it was "down volume button + power " to get into ODIN mode for Samsung devices
up+ down is for recovery
Shirokishi said:
I think this is what you're looking for, yes?
http://galaxys2root.com/tag/diy-usb-jig/
Sidenote:
I thought it was "down volume button + power " to get into ODIN mode for Samsung devices
up+ down is for recovery
Click to expand...
Click to collapse
That is what I ordered, either way on the buttons, phone is bricked to point will take very special sauce to fix it.
Oh... I didn't know all of that... When my phone freezes I can hold the power button for 10 seconds n it'll reboot but u r n need of special sauce... I'm n the 540 sorry
Sent from my SAMSUNG-SGH-I717 using xda premium
mrstone77 said:
Oh... I didn't know all of that... When my phone freezes I can hold the power button for 10 seconds n it'll reboot but u r n need of special sauce... I'm n the 540 sorry
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
Yep am with you on that one, I have soft bricked before, but nothing like this, my very first true brick of my cell. Hopefully Jig I ordered at least gets me into download mode, where I can fix it.
vanemburghj said:
Yep am with you on that one, I have soft bricked before, but nothing like this, my very first true brick of my cell. Hopefully Jig I ordered at least gets me into download mode, where I can fix it.
Click to expand...
Click to collapse
If you can see the samsung bootloader then yeah there's hope otherwise you're gonna need the $100 fix for it.
But at least people are responding, I got no love on my end, lol
keeping things in perspective, as I posted before, I have never seen anyone report that a jig does any good on this phone..
You would be better off either using JTAG, or calling Samsung, and playing stupid, and tell them it died after you did an update that the phone requested..they will send you a replacement, with no questions asked.
go through the general and q&a sections; you will see that a jig doesn't do anything for this phone..
wase4711 said:
keeping things in perspective, as I posted before, I have never seen anyone report that a jig does any good on this phone..
You would be better off either using JTAG, or calling Samsung, and playing stupid, and tell them it died after you did an update that the phone requested..they will send you a replacement, with no questions asked.
go through the general and q&a sections; you will see that a jig doesn't do anything for this phone..
Click to expand...
Click to collapse
Well smokestack76 told you differently yesterday. He said over 20 times with a jig. Plus for $1.60 I will give it a try.
yes, for the price, if it makes you feel better, try it..
and, if you believe him, when you can find 20 others that said it did absolutely nothing, then that's your choice.
the sooner you send it in to Samsung, the sooner you will have a working phone..
If Samsung is wiling to send you a loaner phone while you're under warranty i can't see why you wouldnt do that.
I know Nintendo is awesome like that but apparently Samsung reps are quite jaded when you do something silly like ask an honest question.
I wish Samsung would honor warranty services if the device hasn't been on the market longer than year.
I'm A. Maybe he Made a mistake and wants to own up for it insted of weasling into a fraudulent phone.
B. I would be a little jaded as well when I get people calling me all day that have messed up their own phone and are now trying to steal from me.
C. Samsung does honor warranties a year after the device has been on market. YOUR WARRANTY DOES NOT GO INTO EFFECT UNTIL THE ORIGINAL DATE OF PURCHASE. not when the first one of its kind rolls off the assembly line.
Also, wase a jig does work of you are not actually bricked, if you were to be soft bricked the jig would force download mode. I had a captivate I built a jig for, first thing I did was try it on my note. Bam, download mode.
And finally op it's a micro usb jig not mini. Mini is bigger than micro
yeah bro, I know a jig works for SOME phones; it helped me bring my S2 back to life..
However, I have read many many reports of it doing nothing for the Note, so that was why I said what I did..
Plus, people are using the term "Bricked" around here in so many ways, that its hard to know what they mean when they say it..to me, a bricked phone is DEAD, and nothing but an expensive paperweight.....
I can take a video of my note going from off to download mode with nothing but my jig. However the same jig that works on both my phones is out of resistance tolerance on my brothers sgs2.
And yes bricked is used much too often,it is a term to describe when your phone is inert, has no pliability and just sits there, like the baked red clay building material it was named for.
was curious to see if the OP had any luck with the jig....
Well the jig did nothing for me. I suggest send your phone to mobiletechvideos.com for repair, he goes through the JTAG recovery method, and he also unlocked mine... he did a great job. I bricked my Note flashing a ROM for another device by mistake, could not use the jig for anything, so had it repaired. Feeling really happy now... hope this helps.
the jig isn't and was never meant to fix a hard brick...
[history lesson]
Back on captivate, certain bootloaders would disable the button combos for download and recovery, making a simple (I hate the term... But) soft brick into a much stickier situation, so it was discovered that using 300k ohms of resistance across certain pins on the usb port from a powered off state would trigger download mode in seconds, making you then able to simply odin a stock rom and try again.
It was later discovered that the jig had the same effect on the sgs2 with the added benefit of restting the flash counter.
[/history lesson]
If you flash a firmware for the international note on an i717 you will need jtag because you are indeed bricked of the hard variety.
wase4711 said:
was curious to see if the OP had any luck with the jig....
Click to expand...
Click to collapse
Nope gig still in the mail, however took Note to ATT Device Service Center and they told me mother board failure and replaced it. So might not have been related to flashing, inspection seem pretty in depth, removed back cover, using multi meter type of tool and said mother board didn't provide correct response to input. My mandatory 10 days to return no functioning unit is 17 Dec so don't think will have chance to try the jig before I send it back or be charged $549 for non-functioning unit.
vanemburghj said:
Nope gig still in the mail, however took Note to ATT Device Service Center and they told me mother board failure and replaced it. So might not have been related to flashing, inspection seem pretty in depth, removed back cover, using multi meter type of tool and said mother board didn't provide correct response to input. My mandatory 10 days to return no functioning unit is 17 Dec so don't think will have chance to try the jig before I send it back or be charged $549 for non-functioning unit.
Click to expand...
Click to collapse
might as well keep the jig for the couple of bucks it cost..plus, even if it doesn't work for this phone, it might work for your next one!
Something very strange, I checked the time on the phone while I was seating on my car, then I came home, and when I sat on my desk the phone was completely off. At first I though it might be an empty battery, so I plugged on the wall charger, but NOTHING happened. I tried the charger on another phone and worked, so the problem was the phone.
Took out the battery, put it back again and tried to enter recovery or download mode, none of them worked. (Even the 4 touch keys don´t light up, exactly like when you try to turn it on without a battery).
I left it charging all the night, and in the next morning, it was all the same.
About the phone
Because of the forum, its obvious that is a sgh-i777 AT&T SGSII. I changed many times of ROM, but I was running a custom one called "Alliance", wich is Touchwiz based and so stable, that I decided to keep it (flashed it maybe 3 months ago).
Regarding the installed apps, I had "RAM Manager", on the "more multitasking" preset, also had "STweaks" on the default profile, a task killer called "Speed Booster", "Next Launcher" and a bunch of games.
About the battery
I went to a store and asked to try a new one, but It didn't worked at all. The guy at the store told me that maybe it was a "Motherboard" (or something like that) issue, so I left the phone there to see if the can fix it, but they didn't have any luck. (I have to admit that it wasn't an official Samsung service center, but a friend's shop, so its probable that they dont know much about this kind of stuff). Besides, if you look closely at the phone, you cant see that the screws were untouched, so it seems that they didnt even try to repair it.
Another important thing is the battery "lifestyle" that I always used with the phone: Usage, from normal to exhaustive during the day and let it charging all night, everyday. I notice some alarming overheating when playin hard games (so hot that I quit playing and put the phone on the floor to make it cooler), this maybe has fried something inside.
I insist in the fact that I dont think that the battery is the problem because It didn't worked with a new one.
Well, the last "strage" thing that may have something to do, is that I plugged the USB cable to a "broken" car charger, causing the car fuse to burn, but I dont know if that could affect the phone somehow. (Notice that this episode ocurred 1 week earlier than the sudden death, so I dont think is a problem...)
So, this is it. Hope you can help me, because I miss my phone quite much (1 week no use...) and I would really love to have it back.
Kind regards,
Francis
P.S.: I took a lot of time writting this, try to be polite and helpful with the answers.
How are you trying to get into download mode?
Sent from my GS4 running CM11 Kandy Kane
In the moment I've tried, I did Vol Down + Power Button
Adb portable in my signature can help reboot you to download mode.
Sent from my SGH-I777 using xda premium
In fact, it didnt worked, because the phone does not react when plugged, so it is not detected by the pc nor ADb. Nice try anyways
If your phone does not respond to battery, computer, or wall charger then it is what is known as a hard brick.
Your device may have been damaged by the car charger as well.
Sent from my SGH-I777 using xda premium
@FranAmestoy,
If you are getting absolutely no response from the phone, and nothing you can do has any effect, then try one last thing (if you haven't already). Pull the battery and leave it out. While holding down both volume buttons, plug in the usb cable. The computer will supply the power. This will put a phone into download mode, but if there is no response to this, then at least you know for sure it is not a battery problem.
There is a difference between "hardware failure" and "hard bricked".
Technically speaking, hard bricked means a firmware problem, usually with the primitive bootloader or the primary bootloader. Such a problem can be fixed using equipment and a technique called jtag, by which the damaged bootloaders are reinstalled. This supposes that the hardware is still functioning correctly.
On the other hand, if the phone has damage to the eMMC memory, or some other hardware failure, then the only remedy is to troubleshoot and repair the hardware. This is perhaps what the technician was suggesting when he said it could be a mother board problem.
Judging from your description of the occurence, it doesn't sound like you did anything that would result in a hard brick. But then I don't know if you actually mentioned everything relevant. In order to find out, you would need to get the phone to a competent technician. The guy who owns Mobile Tech videos is highly respected here. If you wish to pursue getting it repaired, I would suggest that you call him and go over the problem with him, find out his prices, see if he thinks it is worth it, etc.
I have used MTV before and I can say their service was wonderful.
Sent from my SGH-I777 using xda premium
Now this is what I call "help"
I have to say many thanks to creepyncrawly and Red_81 for giving me the kind of answer that I was looking for.
In a few minutes I will try that USB power method, and see what I get.
Regarding your suggestion, I do very appreciatte your kindness and recomendation of where to take the phone to, but my problem is that I bought the phone in the USA, and I live in Argentina, so its way out of my reach to get what you recommend. Anyway, a few minutes from home there is an official Samsung store, that apparently, offers technical assistance, so I will try luck by going there.
For now, I still say you many thanks and I will keep you informed about what I get.
Kind regards,
Francis
Red_81 said:
If your phone does not respond to battery, computer, or wall charger then it is what is known as a hard brick.
Your device may have been damaged by the car charger as well.
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
If the car charger burned down the phone, how can be possible that it continued working during a week before the dropout? I am not saying that's not the problem, but I dont know if there are any relations with so much time in between...
FranAmestoy said:
In the moment I've tried, I did Vol Down + Power Button
Click to expand...
Click to collapse
No, USB + both volume keys
Sent from my Nexus 7 using Tapatalk HD
Donwload also didnt work...
As the title reads, I still dont have any luck.
Guess the final call will be to take it to the technical service T_T
Are those things "fixable"? Will be impossible to get a new phone if I cant sell this...
(Now Im missing it a lot...)
FranAmestoy said:
If the car charger burned down the phone, how can be possible that it continued working during a week before the dropout? I am not saying that's not the problem, but I dont know if there are any relations with so much time in between...
Click to expand...
Click to collapse
Agreed. I think it unlikely, but it is possible.
FranAmestoy said:
Are those things "fixable"? Will be impossible to get a new phone if I cant sell this... (Now Im missing it a lot...)
Click to expand...
Click to collapse
Hard brick repair with jtag would be around US$50.00 plus shipping. Hardware repair would be at least that much in the US unless you can do it yourself. It may be more economical to replace the phone.
When you go to the Samsung store, ask them if it is still under warranty. The phone can be sent to Samsung for repair if they can not do it at the store. I have no idea what that would cost if it is not under warranty. Here in the US we would ship it off to a Samsung repair shop somewhere after talking to them over the phone. But I've never had to do that so I have no idea.
creepyncrawly said:
Agreed. I think it unlikely, but it is possible.
Hard brick repair with jtag would be around US$50.00 plus shipping. Hardware repair would be at least that much in the US unless you can do it yourself. It may be more economical to replace the phone.
When you go to the Samsung store, ask them if it is still under warranty. The phone can be sent to Samsung for repair if they can not do it at the store. I have no idea what that would cost if it is not under warranty. Here in the US we would ship it off to a Samsung repair shop somewhere after talking to them over the phone. But I've never had to do that so I have no idea.
Click to expand...
Click to collapse
Thanks for the ideas, but will be impossible, because I bought the phone through eBay and I dont have the invoice, also the phone is rooted and with a custom ROM (triangle alert appears), so the warranty is "super-voided", no chances at all to get it back to stock (remember he's dead...)
I will cross my fingers to see if the can tell me if the can fix it, and how much would it cost.
My major concern is that the failure became impossible to fix. In that case, what will I do? I just can't offer a dead phone on internet for $2... Obviously I need to make some money from him in order to get a new one... However I still have some faith in the official store
You would likely get more than a few dollars selling it on ebay for parts. The digitizer and other parts are definitely worth something. But of course it's not going to be $200.00. Anyway, good luck. I hope you find it is fixable.
I was running PA aosk Rom no issues then I flashed two zips that contained scripts to zip align apps at boot. I haven't been able to boot my phone since. Can't get to recovery or boot loader either.... any ideas??????
You BRICK Your phone sorry for You pain
Sent from my SAMSUNG-SGH-I717 using xda premium
ya bricking sucks. But I swear there has to be way out. These phones seem so bullet proof to me. There has to be a fix..... I found this siteher: http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-note-jtag-brick-repair/ ......It seems to be what I need or possible one of those USB Jigs...... Anyone have experience with either??
So you can't get any bootloader action at all sounds like you sol Ive heard nothing but good things about mobiletechvideo if thats your only route left can you tell us what scrips you flashed might help.
If you get nothing out of it at all. Whatsoever.
You press buttons, it gives you the proverbial finger.
It's bricked.
A jig isn't meant to fix a brick, just force download mode on a Samsung device that has signs of life, but will not boot fully AND button combos do not work... commonly miscalled a "soft brick"
Only fix for a brick is jtag, mobile tech videos is a top notch shop, many kudos and recommendations.
studacris;
thanks for the clarification. I will be sending it out to mobile tech for a jag. Let you all know in couple weeks. Still $50 although a good deal of money adding shipping etc. is still cheaper than buying used. Plus I really like my note still and dont want to upgrade till note 3!!!!
Don't flash those zips again.
Yes, JTAG service will fix your phone. The cost is $50.
Oops. cris covered this very well. Sorry, I didn't intend to step on toes.
rangercaptain said:
Yes, JTAG service will fix your phone. The cost is $50.
Oops. cris covered this very well. Sorry, I didn't intend to step on toes.
Click to expand...
Click to collapse
If any members of Xda forum have brick phone please contact me for cheapest Jtag service.
Thanks.