Is Sideloading possible on DLOAD devices - Nokia Lumia 800

I have a lumia 800 with DLOAD so I cant flash a custom rom but I was wondering if it was possible to side load applications, Previously I used the windows phone and app hub on dreamspark but ive read its been axed.
Can anyone more familiar with the os point me in the direction of its replacement ? I have a verified dreamspark account and am aware of the 10 application limit

Well, the only method that I know that works it is developer unlock, wich allow you sideload until 10 apps (they must be signed). Look over Google for some tutorial.

I think it's 3 applications

I have made a tuto fro 10 apps, PM me

Related

[Q] What is the missing part between QCOM and DLOAD

I mean are we missing something like a certficate or stuff like that? I downloaded the ATF box utility and with it there are lots of files such as osbl_dload or osbl_qcom or mbr or sec_boot.....can someone do something with those? I would really appreciate some explanation.....
Zae0 said:
I mean are we missing something like a certficate or stuff like that? I downloaded the ATF box utility and with it there are lots of files such as osbl_dload or osbl_qcom or mbr or sec_boot.....can someone do something with those? I would really appreciate some explanation.....
Click to expand...
Click to collapse
Most Lumia 800 phones have a restrictive bootloader ('DLOAD'). We have a working open bootloader for the Lumia 800, however it is not 'signed', so we cannot install it on the 'DLOAD' phones. The Lumia 800 phones have restrictions as to what components can be installed and they must be signed (certificates).
With the ATF box, you can use the special 'test points' of the Lumia 800 in order to write directly on the phone memory the (unlocked) open bootloader, replacing the restrictive bootloader. These test points are accessible when you open up the Lumia 800 phone. With the ATF box, you ignore issues about certificates because you use a trick to write directly on the phone memory.
The DLOAD Lumia 800 phones have restrictions. If you want to access the phone memory, you need to go through special Windows Phone software, and this software does not provide direct access. It is very restrictive.
Some initial Lumia 800 phones had the open bootloader (from Qualcomm), which allowed to boot the phone in a special way, and gave full access to the phone memory. Full access to all the 16GB of phone memory. If you have such a phone, it is possible to fully unlock it (there are instructions in this forum) and have admin acess to the phone.
Thank you so much....but is there any kind of certificate on those files that i mentioned before?

[Q] WhatsApp XAP for manual install

Hey Guys,
i installed whatsapp on my lumia 920, when it was available in store. Now i bought my girlfriend a lumia 820 and the only thing she uses all the day is whatsapp, but now it's not available at store anymore. I have v2.8.2 installed on my lumia and tried to install the xap downloaded from the store on her 820, but the phone shows the app as "not compatible".
Is there anyone out there who have whatsapp on a 820 and is able to post the xap-file?
Big thanks!
nickel
der-nickel said:
Hey Guys,
i installed whatsapp on my lumia 920, when it was available in store. Now i bought my girlfriend a lumia 820 and the only thing she uses all the day is whatsapp, but now it's not available at store anymore. I have v2.8.2 installed on my lumia and tried to install the xap downloaded from the store on her 820, but the phone shows the app as "not compatible".
Is there anyone out there who have whatsapp on a 820 and is able to post the xap-file?
Big thanks!
nickel
Click to expand...
Click to collapse
You have to Jailbreak the phone, from that moment you can deploy xap files to your phone. I don't thonk there is another way yet, because you have to gain root acces to manual install.
2fast4u2 said:
You have to Jailbreak the phone, from that moment you can deploy xap files to your phone. I don't thonk there is another way yet, because you have to gain root acces to manual install.
Click to expand...
Click to collapse
That's not the full truth. Since few days you're able to download the "free" xap-Files from the windows-phone-store and place them on your sd-card to install them. With this you're able to install some apps "offline". I installed WhatsApp on my Lumia 920 from store and it works. So there must be a 'valid' xap-file for windows phone 8 that is "installable".
The "how to download and install xap-files offline" can you find here.
der-nickel said:
That's not the full truth. Since few days you're able to download the "free" xap-Files from the windows-phone-store and place them on your sd-card to install them. With this you're able to install some apps "offline". I installed WhatsApp on my Lumia 920 from store and it works. So there must be a 'valid' xap-file for windows phone 8 that is "installable".
The "how to download and install xap-files offline" can you find here.
Click to expand...
Click to collapse
Would you mind elaborating this procedure a bit further? My N920 is developer unlocked and I've copied a XAP file to my phone. I placed it in Documents, because I haven't seen any suitable folder.
The phone itself has apparently no SD-Card, hence the store is not showing any "install from SD-Card option"
The app I' d like to install is "keep-alive" which isn't available anymore.
Kind regards,
azel
der-nickel said:
That's not the full truth. Since few days you're able to download the "free" xap-Files from the windows-phone-store and place them on your sd-card to install them. With this you're able to install some apps "offline". I installed WhatsApp on my Lumia 920 from store and it works. So there must be a 'valid' xap-file for windows phone 8 that is "installable".
Click to expand...
Click to collapse
How does it work with Lumia 920 since it doesn't have a place for an external SD-card? I have downloaded Whatsapp on my computer and placed it on my L920's internal SD-card. When I open the store, my SD-card isn't listed as an option. What am I doing wrong? My phone isn't developer unlocked and I won't pay $99 just to get Whatsapp installed
if your phone is developer unlocked you can just use the xap tool provided by Microsoft with the SDK to deploy xap-files on your phone...
der-nickel said:
Hey Guys,
i installed whatsapp on my lumia 920, when it was available in store. Now i bought my girlfriend a lumia 820 and the only thing she uses all the day is whatsapp, but now it's not available at store anymore. I have v2.8.2 installed on my lumia and tried to install the xap downloaded from the store on her 820, but the phone shows the app as "not compatible".
Is there anyone out there who have whatsapp on a 820 and is able to post the xap-file?
Big thanks!
nickel
Click to expand...
Click to collapse
Go to whatsapp homepage. They have link to install to your phone
Sent from my GT-P7300 using Tapatalk 2
chriscsh said:
Go to whatsapp homepage. They have link to install to your phone
Sent from my GT-P7300 using Tapatalk 2
Click to expand...
Click to collapse
Doesn't work on WP8.
Kalkkis said:
How does it work with Lumia 920 since it doesn't have a place for an external SD-card? I have downloaded Whatsapp on my computer and placed it on my L920's internal SD-card. When I open the store, my SD-card isn't listed as an option. What am I doing wrong? My phone isn't developer unlocked and I won't pay $99 just to get Whatsapp installed
Click to expand...
Click to collapse
can you upload the xap to any server or contact me via pm?
Who needs a title anyway?
I have a developer unlocked HTC 8X, and I would really appreciate having the XAP file as well
anguruso said:
I have a developer unlocked HTC 8X, and I would really appreciate having the XAP file as well
Click to expand...
Click to collapse
Same problem in here. The funny thing is on my HTC 8x which i get in November Whatsapp is still installed because it wasn't blocked in the store at this point...
Now i have a Lumia 920 and can't install it anymore. If you download the xap from the microsoft store and deploy it with the WP8 SDK the error "XAP file is invalid." appears, so this won't work eighter.
Would be nice if anyone would provide a workaround.
sirveon said:
Same problem in here. The funny thing is on my HTC 8x which i get in November Whatsapp is still installed because it wasn't blocked in the store at this point...
Now i have a Lumia 920 and can't install it anymore. If you download the xap from the microsoft store and deploy it with the WP8 SDK the error "XAP file is invalid." appears, so this won't work eighter.
Would be nice if anyone would provide a workaround.
Click to expand...
Click to collapse
What a bummer, I found a bunch of XAPs from various Chinese websites. They don't work either. ****kkkk.
I'll PM you. I'm not able to post links. Too bad it doesn't seem to work. Hope the app comes available in the store soon.
i have a 2.8.0.0 and a 2.8.2 and deployed both,both run but everytime i try to verify my number it says that i need to update my whatsapp to the newest...
we need a 2.8.8.
i have the 2.8.8 but it says invalid xap,the xap could be broken...i search for another one
Does anybody know a way to install .xap's on L920 without developer unlock? Too bad if it only works when using an external SD-card.
Give this xap file a try. Your phone will need to be developer unlocked and pushed to the phone with the Windows Phone SDK application deployment tool. It is version 2.8.2 but works fine on my HTC 8X after removing DRM info and repacking it.
http://www.4shared.com/file/e5mk2TuV/whatsapp282.html
great it works...thanks
how can i install it fro .xap file without external sd card?
ilbulgaro89 said:
how can i install it fro .xap file without external sd card?
Click to expand...
Click to collapse
That's what I'd like to know too... It can be done if your phone is developer unlocked but it costs $99 which is way too much. It's weird if .xap's can be installed on WP8 devices with external SD-slot but can't be installed on those that don't have a slot. Please share if you know something! I really need the app.
I did send the WP8 XAP of Whatsapp (http://www.windowsphone.com/de-de/store/app/whatsapp/218a0ebb-1585-4c7e-a9ec-054cf4569a79) to myself per email (I'm on a Lumia 920) but couldn't get it installed due to some error. But then, I already have Whatsapp installed when it was still possible to do so.

[Q] Can someone post Mediapad X1 international ROM?

I bought a Mediapad X1 from China via AliExpress.
I cannot make anything from a limited Chinese ROM.
Anybody who has international ROM or can extract it from the international version, please help!
satawat.thongsawat said:
I bought a Mediapad X1 from China via AliExpress.
I cannot make anything from a limited Chinese ROM.
Anybody who has international ROM or can extract it from the international version, please help!
Click to expand...
Click to collapse
The international version hasn't been released yet... I bought mine (4G version) through Lenteen from Hong-Kong, and everythings works fine ! I installed google apps, rooted my phone
I know that Huawei was supposed to release it at the end of may in France but any news nowhere on the web... none even from Huawei themself !
So we just have to wait and see...
gregou said:
The international version hasn't been released yet... I bought mine (4G version) through Lenteen from Hong-Kong, and everythings works fine ! I installed google apps, rooted my phone
I know that Huawei was supposed to release it at the end of may in France but any news nowhere on the web... none even from Huawei themself !
So we just have to wait and see...
Click to expand...
Click to collapse
Does it sync your Google contacts correctly? If so, what did you need to do to get that working?
gregou said:
The international version hasn't been released yet... I bought mine (4G version) through Lenteen from Hong-Kong, and everythings works fine ! I installed google apps, rooted my phone
I know that Huawei was supposed to release it at the end of may in France but any news nowhere on the web... none even from Huawei themself !
So we just have to wait and see...
Click to expand...
Click to collapse
Thank you for the reply, some questions:
1. So, yours is also a Chinese version?
2. Please post the link for rooting.
3. After rooting, install the GApp, version for 4.2.2? And then we can go for anything, like Nova launcher?
satawat.thongsawat said:
Thank you for the reply, some questions:
1. So, yours is also a Chinese version?
2. Please post the link for rooting.
3. After rooting, install the GApp, version for 4.2.2? And then we can go for anything, like Nova launcher?
Click to expand...
Click to collapse
So yes it's also a chinese version, but it's the 4G chinese version.
TUTO FOR ROOTING :
Here is the procedure for your rooter Huawei Mediapad X1/Honor X1:
Here's what you need:
MediaPad Huawei X1
A micro USB to USB cable
PC
Root Genius software at the following address : http://www.shuame.com/en/root/
Now to root your device : (This method works with B002 Chinese version, not tested on others number firmwares)
1 - Enable developer mode on Huawei MediaPad X1 in Settings> About phone
Press several times on the box " build number " until a message announcing the activation of developer mode
Connect your Huawei MediaPad X1.
2 - In the notification bar choose the Hi Suite mode and let the PC detected the device
3 - Start the Root Genius you previously downloaded, it will automatically detect your device, it only remains for you to click on the ROOT button and wait
4 - If all went well , you should have a message of congratulations . In addition, a new application called King User will be installed on your device.
Now you can use apps that require root such as Titanium Backup , Root Explorer, etc. . You 'll also be able to uninstall applications or games you do not want and which are pre-installed on the device.
If you have any questions do not hesitate!
P.S : If anything goes wrong that's your entire responsability !
---------- Post added at 05:22 AM ---------- Previous post was at 05:15 AM ----------
TUTO TO GET ALL GAPPS (INCLUDED CONTACTS SYNC)
As you know , the Chinese version of the Huawei Mediapad do not get Google applications .
*
Here is the procedure to have them all , including the synchronization of contacts !
*
*What you need:
Huawei Mediapad Honor X1 (chinese version) Your phone must be already rooted ! ( follow the tutorial i posted earlier)
A file explorer that supports the administration ROOT rights (root explorer, es file explorer , etc. . ) Available on Google Play Store
There is nothing very complicated , just follow the tutorial :
Open your file explorer supporting the rights adminstration ROOT
Go to the following folder
/ cust / channel / charm_china_u / xml /
You will find the file UNSTALL_APK.XML
Rename it to : UNSTALL_APK.XML.OLD
This is done !
Restarting the Huawei Honor Mediapad/Honor X1 , applications will be automatically downloaded and installed on the phone and you will have access to all Google services including synchronization of contacts !
*
WARNING: by doing this manipulation, future updates will no longer be compatible with the device and you will have to rename the file UNSTALL_APK.XML.OLD to UNSTALL_APK.XML to update the device. Otherwise, you can make a copy of the original file that you can keep safe somewhere on your phone or computeur.
If anything goes wrong that's your entire responsability !
http://consumer.huawei.com/cn/mobile-phones/support/downloads/honour-x1-cn.htm
vyming said:
http://consumer.huawei.com/cn/mobile-phones/support/downloads/honour-x1-cn.htm
Click to expand...
Click to collapse
This is a Chinese ROM?
gregou said:
So yes it's also a chinese version, but it's the 4G chinese version.
TUTO FOR ROOTING :
Here is the procedure for your rooter Huawei Mediapad X1/Honor X1:
Here's what you need:
MediaPad Huawei X1
A micro USB to USB cable
PC
Root Genius software at the following address : http://www.shuame.com/en/root/
Now to root your device : (This method works with B002 Chinese version, not tested on others number firmwares)
1 - Enable developer mode on Huawei MediaPad X1 in Settings> About phone
Press several times on the box " build number " until a message announcing the activation of developer mode
Connect your Huawei MediaPad X1.
2 - In the notification bar choose the Hi Suite mode and let the PC detected the device
3 - Start the Root Genius you previously downloaded, it will automatically detect your device, it only remains for you to click on the ROOT button and wait
4 - If all went well , you should have a message of congratulations . In addition, a new application called King User will be installed on your device.
Now you can use apps that require root such as Titanium Backup , Root Explorer, etc. . You 'll also be able to uninstall applications or games you do not want and which are pre-installed on the device.
If you have any questions do not hesitate!
P.S : If anything goes wrong that's your entire responsability !
---------- Post added at 05:22 AM ---------- Previous post was at 05:15 AM ----------
TUTO TO GET ALL GAPPS (INCLUDED CONTACTS SYNC)
As you know , the Chinese version of the Huawei Mediapad do not get Google applications .
*
Here is the procedure to have them all , including the synchronization of contacts !
*
*What you need:
Huawei Mediapad Honor X1 (chinese version) Your phone must be already rooted ! ( follow the tutorial i posted earlier)
A file explorer that supports the administration ROOT rights (root explorer, es file explorer , etc. . ) Available on Google Play Store
There is nothing very complicated , just follow the tutorial :
Open your file explorer supporting the rights adminstration ROOT
Go to the following folder
/ cust / channel / charm_china_u / xml /
You will find the file UNSTALL_APK.XML
Rename it to : UNSTALL_APK.XML.OLD
This is done !
Restarting the Huawei Honor Mediapad/Honor X1 , applications will be automatically downloaded and installed on the phone and you will have access to all Google services including synchronization of contacts !
*
WARNING: by doing this manipulation, future updates will no longer be compatible with the device and you will have to rename the file UNSTALL_APK.XML.OLD to UNSTALL_APK.XML to update the device. Otherwise, you can make a copy of the original file that you can keep safe somewhere on your phone or computeur.
If anything goes wrong that's your entire responsability !
Click to expand...
Click to collapse
@gregou
I cannot get into download mode to install Gapps via odin.
Also cannot find recovery mode???
How to install Gapps,then??
satawat.thongsawat said:
@gregou
I cannot get into download mode to install Gapps via odin.
Also cannot find recovery mode???
How to install Gapps,then??
Click to expand...
Click to collapse
When the phone reboot, after you renamed the file, gapps are automatically installed by the phone.. You don't have to use recovery mode at all !!
And for now, i'm not sure that CWM is available for this model... I think i saw it on a chinese forum but when i translate it's too messy and i have to be registered on this forum to download it so... we have to wait that someone make a post here in english with th e CWM in download...
gregou said:
When the phone reboot, after you renamed the file, gapps are automatically installed by the phone.. You don't have to use recovery mode at all !!
And for now, i'm not sure that CWM is available for this model... I think i saw it on a chinese forum but when i translate it's too messy and i have to be registered on this forum to download it so... we have to wait that someone make a post here in english with th e CWM in download...
Click to expand...
Click to collapse
Okay, I see the point, we just install portions of Google apps we need, starting with play store, the any thing you need.
I do hope we'll have CWM, or at least hardware ways to boot into download and recovery mode.
The KitKat may be far from reality?
satawat.thongsawat said:
Okay, I see the point, we just install portions of Google apps we need, starting with play store, the any thing you need.
I do hope we'll have CWM, or at least hardware ways to boot into download and recovery mode.
The KitKat may be far from reality?
Click to expand...
Click to collapse
We'll get Kikat firmware on this phone for sure, we just have to wait from Huawei to rolling out this version.
It's not portions of google apps as when you do this procedure i explained, ALL the gapps are installed automatically on the phone.
Basically, Huawei made a script in the phone for not allowing these apps to be installed, but when you rename this file, the script is no longer available, then all the gapps are installing after the next reboot !
Mediapad X1 7D-503L
The only deference is the directory:
/ cust / channel / charm_china_l / xml / ( charm_china_l not charm_china_u)
and i use the command as su
mount -o rw,remount -t rootfs /cust
because when It try to rename the UNSTALL_APK.XML I take the error "Read-only file system"
thanks
X1 undetectable by the PC
I have GApps Syncing quite fine without rooting, except the contacts sync which is missing from the sync list. I see your steps are very straight forward, but unfortunately my X1 is not recognized by the PC, although I've installed HiSuite from Huawei website. I've also tried to install Huawei device driver for X1 from this site, but still unrecognized. Accordingly GeniusRoot is unable to detect and root my X1.
I'm Win 8.1 (both 32 and 64 bits), and I've tried to do all these procedures with Compatibility model for Win7, run as administrator, yet the X1 is till not detected by the PC.
Also USB Debugging is enabled in Developer Options.
Any idea what's the reason for this?
More info about my version:
Baseband: 21.529.00.00.000
Kernel: 3.0.8-01317-gcd83a45 [email protected] #1
Build Number: 7D-501uV100R001C233B013
gregou said:
So yes it's also a chinese version, but it's the 4G chinese version.
TUTO FOR ROOTING :
Here is the procedure for your rooter Huawei Mediapad X1/Honor X1:
Here's what you need:
MediaPad Huawei X1
A micro USB to USB cable
PC
Root Genius software at the following address :
Now to root your device : (This method works with B002 Chinese version, not tested on others number firmwares)
1 - Enable developer mode on Huawei MediaPad X1 in Settings> About phone
Press several times on the box " build number " until a message announcing the activation of developer mode
Connect your Huawei MediaPad X1.
2 - In the notification bar choose the Hi Suite mode and let the PC detected the device
3 - Start the Root Genius you previously downloaded, it will automatically detect your device, it only remains for you to click on the ROOT button and wait
4 - If all went well , you should have a message of congratulations . In addition, a new application called King User will be installed on your device.
Now you can use apps that require root such as Titanium Backup , Root Explorer, etc. . You 'll also be able to uninstall applications or games you do not want and which are pre-installed on the device.
If you have any questions do not hesitate!
P.S : If anything goes wrong that's your entire responsability !
---------- Post added at 05:22 AM ---------- Previous post was at 05:15 AM ----------
TUTO TO GET ALL GAPPS (INCLUDED CONTACTS SYNC)
As you know , the Chinese version of the Huawei Mediapad do not get Google applications .
*
Here is the procedure to have them all , including the synchronization of contacts !
*
*What you need:
Huawei Mediapad Honor X1 (chinese version) Your phone must be already rooted ! ( follow the tutorial i posted earlier)
A file explorer that supports the administration ROOT rights (root explorer, es file explorer , etc. . ) Available on Google Play Store
There is nothing very complicated , just follow the tutorial :
Open your file explorer supporting the rights adminstration ROOT
Go to the following folder
/ cust / channel / charm_china_u / xml /
You will find the file UNSTALL_APK.XML
Rename it to : UNSTALL_APK.XML.OLD
This is done !
Restarting the Huawei Honor Mediapad/Honor X1 , applications will be automatically downloaded and installed on the phone and you will have access to all Google services including synchronization of contacts !
*
WARNING: by doing this manipulation, future updates will no longer be compatible with the device and you will have to rename the file UNSTALL_APK.XML.OLD to UNSTALL_APK.XML to update the device. Otherwise, you can make a copy of the original file that you can keep safe somewhere on your phone or computeur.
If anything goes wrong that's your entire responsability !
Click to expand...
Click to collapse
Thanks for the awesome tutorial bro
I've managed to root the phone, installed es files explorer. Double checked with root checker and confirmed root
But I'm stuck with renaming the file...
And the folder have a slightly different name but that is the only folder I've got..
/cust/channel/charm_china_l/xml/ (yours is china_u)
So, everytime I rename the file it keeps on giving error task failed. I've checked in properties and it says readable:yes writable:yes
I can't delete the file as well the error says unstall_apk.xml cannot be deleted
can u help please
thanks in advance :good:
sordanny said:
Thanks for the awesome tutorial bro
I've managed to root the phone, installed es files explorer. Double checked with root checker and confirmed root
But I'm stuck with renaming the file...
And the folder have a slightly different name but that is the only folder I've got..
/cust/channel/charm_china_l/xml/ (yours is china_u)
So, everytime I rename the file it keeps on giving error task failed. I've checked in properties and it says readable:yes writable:yes
I can't delete the file as well the error says unstall_apk.xml cannot be deleted
can u help please
thanks in advance :good:
Click to expand...
Click to collapse
OK I managed to figure out the solution
Used Root File Manager to rename and voila!! Renamed the file, restart device and got all the Google stuff setup on the phone
Now there is this second problem which is a big pain in the arse
I can't add a second Google account on the phone to get all my contacts..........
Under settings -> accounts -> add account -- there is no option to select "Google" !!!!
Have anyone also face this problem and is there any solution??
Thanks in advance for the help
Guys, you do not need root or tricks to install Google stuff.
Open the Huawei app market. Search for Google. Click on the big Google banner at the top of the page. You get a dedicated page of Google stuff. There you have download links for play store, all the Google apps, and if you can figure out a little Chinese, calendar sync and contact sync software too.
ralphrmartin said:
Guys, you do not need root or tricks to install Google stuff.
Open the Huawei app market. Search for Google. You get a dedicated page of Google stuff. There you have download links for play store, all the Google apps, and if you can figure out a little Chinese, calendar sync and contact sync software too.
Click to expand...
Click to collapse
I can confirm this is true. I did a search for "gms" rather than Google - tap on the big link you get at the top of the results page, which takes you to a page of all the Google apps and services, and install everything! (You can always uninstall what you don't need later). No root required, and everything is syncing properly - calendar, contacts, tasks etc. Super easy.
ralphrmartin said:
Guys, you do not need root or tricks to install Google stuff.
Open the Huawei app market. Search for Google. Click on the big Google banner at the top of the page. You get a dedicated page of Google stuff. There you have download links for play store, all the Google apps, and if you can figure out a little Chinese, calendar sync and contact sync software too.
Click to expand...
Click to collapse
This worked for me too. I installed all google apps and everthing syncs except I still cant sync contacts or have more than one google account.
So frustrated
DannyBoy said:
This worked for me too. I installed all google apps and everthing syncs except I still cant sync contacts or have more than one google account.
So frustrated
Click to expand...
Click to collapse
Have you got Google Contacts Sync in your list of downloaded apps?
DannyBoy said:
This worked for me too. I installed all google apps and everthing syncs except I still cant sync contacts or have more than one google account.
So frustrated
Click to expand...
Click to collapse
Danny here's how to fix it, and u don't need root
if u have rooted and edited the unstall_apk.xml, best is download and flash the stock ROM first:
http://consumer.huawei.com/cn/support/downloads/detail/index.htm?id=20241 (click 立即下载 on the right)
u can also ignore it but all preinstalled google apps will become system apps, and if u've deleted some huawei bloatware u might not be able to OTA update latest B006 firmware
All the Google stuff can work perfectly even can add multiple Google accounts. Best thing is, u don't need root. Here's how:
1) Go to app centre - all - brand and look for the one with 谷歌 (sorry I've updated app centre and it might be different if u haven't update)
2) Download 联系人同步服务, 日历同步服务, Google Playstore, Gmail and Google plus. The rest can be downloaded from playstore
3) After install, open either playstore or gmail and sign in
At this stage, Google is already setup properly with contacts sync just it cannot add multiple Google accounts. Workaround:
4) Open Google plus. Settings - add account
And voila. The phone is perfect now
There's also an OTA update for the LTE version which updates your phone firmware to 7D-503LV100R001C233B006
Cool new features includes double tap screen on, some control over notification flash light for messages and background battery optimization :good:

[Q] Installing multiple devices at once

Hi, I have about 200 android tablets and I would like to know if there is any solution how to install them whit filled Google account, installed apps from GP, settings by some easy way rather than doing it with every single tablet...
Something like image file ofr Windows, or *.exe app (in self execution rar) which contains specific informations, ex. specific company ports etc.
Do you guys know about anything like that? It could be even bussines solution, paid, there is no problem with that, only I could not find anything
¨
Thank you very much!!!

HUAWEI MediaPad T3 10 and locked bootloader. Struggle in 2021.

Main objective: Find any way to enabling application transfer from internal storage to external storage.
The device has 16 GB of internal memory, which is definitely not enough to use additional applications. It looks like the option to transfer apps from internal storage to external storage for this particular model is forbidden. This situation makes it practically impossible to use this device any longer. I have tried many ways to resolve the problem. Unfortunately i failed. Therefore, I am asking for help from specialists from this forum if there is any way to make it possible way to do this taking into consider the inability to obtain the code from the site, which I am writing about below.
What i have tried already:
Enabling programmer mode and therefore changing the option that is blocking transfer to external storage. Unfortunately switching is not possible in this case. Enabling this option automatically forces return to the previous state.
Installing applications that are supposed to enable such transfer. Most of them are crap and scam.
Attempting to upgrade system with a built-in option and with Hi Suite. There is no option to upgrade firmware or downgrade by using this options.
Attempting to upgrade system with Firmware Finder for Huawei. I don't think I can get anything more than just downloading the firmware using this app. The idea was to force the installation of a newer version of the operating system by forcing some changes in the built-in updater.
Root and open firmware attempts:
At first, I was looking for a way to gain root access with the app available (kingRoot, KingoRoot etc.). Neither of them worked
I tried to install custom recovery. I turned on usb debugging, disabled the OEM lock and I was able to set the connection to the device.
When I tried to upload a custom recovery I got a message saying that this method is forbidden.
I was looking for information about the problem and so I found out that the botlooader is locked and that I need a special key to unlock him.
Next I found information that it is possible to obtain this key using paid applications and I'm skeptical about them.
Another option was to try to get this code from the manufacturer. It turned out that it was actually possible, but for some time Huawei as a manufacturer no longer provides these codes, which was confirmed to me by a person employed on the HelpDesk hotline.
Device information
Device nameHUAWEI MediaPad T3 10ModelAGS-L09S/NHEKNU19103105947Product ID89046711External SD card:64 GB
System information
Android System Version7.0EMUI version5.1.3Compilation:AGS-L09C100B279
Have you tried this steps - https://www.droidguides.com/unlock-bootloader-install-twrp-recovery-huawei-mediapad-t3-10/
Also trying this, Tempted to just throw the device out the window, think next time I will stick with Samsung.
Viro251 said:
Main objective: Find any way to enabling application transfer from internal storage to external storage.
The device has 16 GB of internal memory, which is definitely not enough to use additional applications. It looks like the option to transfer apps from internal storage to external storage for this particular model is forbidden. This situation makes it practically impossible to use this device any longer. I have tried many ways to resolve the problem. Unfortunately i failed. Therefore, I am asking for help from specialists from this forum if there is any way to make it possible way to do this taking into consider the inability to obtain the code from the site, which I am writing about below.
What i have tried already:
Enabling programmer mode and therefore changing the option that is blocking transfer to external storage. Unfortunately switching is not possible in this case. Enabling this option automatically forces return to the previous state.
Installing applications that are supposed to enable such transfer. Most of them are crap and scam.
Attempting to upgrade system with a built-in option and with Hi Suite. There is no option to upgrade firmware or downgrade by using this options.
Attempting to upgrade system with Firmware Finder for Huawei. I don't think I can get anything more than just downloading the firmware using this app. The idea was to force the installation of a newer version of the operating system by forcing some changes in the built-in updater.
Root and open firmware attempts:
At first, I was looking for a way to gain root access with the app available (kingRoot, KingoRoot etc.). Neither of them worked
I tried to install custom recovery. I turned on usb debugging, disabled the OEM lock and I was able to set the connection to the device.
When I tried to upload a custom recovery I got a message saying that this method is forbidden.
I was looking for information about the problem and so I found out that the botlooader is locked and that I need a special key to unlock him.
Next I found information that it is possible to obtain this key using paid applications and I'm skeptical about them.
Another option was to try to get this code from the manufacturer. It turned out that it was actually possible, but for some time Huawei as a manufacturer no longer provides these codes, which was confirmed to me by a person employed on the HelpDesk hotline.
Device information
Device nameHUAWEI MediaPad T3 10ModelAGS-L09S/NHEKNU19103105947Product ID89046711External SD card:64 GB
System information
Android System Version7.0EMUI version5.1.3Compilation:AGS-L09C100B279
Click to expand...
Click to collapse
Have you had any look so far?
Not possible without unlock the bootloader.
Im very angry with Huawei.
----Edit----
Unlock bootloader but pay 49$ with octoplus huawei tool, now tried install lineageOs
I unlocked for 4 Euro with HCU Client. I buy the credit on DC-Unlocker.
krisy0243 said:
I unlocked for 4 Euro with HCU Client. I buy the credit on DC-Unlocker.
Click to expand...
Click to collapse
Thanks for the tips I was able to unlock my AGS-W09 for 4 euro too (I would not have paid 40 euros for this device!).
I just lost several hours to understand and find the way to the "manufacter mode" on a tablet !
For those looking how to: launch the calc app and enter ()()2846579()()
an hidden menu will popup and you will be able to setup USB ports.
tuxfamily said:
Thanks for the tips I was able to unlock my AGS-W09 for 4 euro too (I would not have paid 40 euros for this device!).
I just lost several hours to understand and find the way to the "manufacter mode" on a tablet !
For those looking how to: launch the calc app and enter ()()2846579()()
an hidden menu will popup and you will be able to setup USB ports.
Click to expand...
Click to collapse
I launch the Calc app as you advised but nothing happened..! Pls help a brother..! How can I buy this 4euro bootloader tool..?
aobaro said:
I launch the Calc app as you advised but nothing happened..! Pls help a brother..! How can I buy this 4euro bootloader tool..?
Click to expand...
Click to collapse
Sorry, it wasn't mine, I don't have it anymore.
As I remember, It was the stock calc app, in landscape mode in order to have the "()" but that's all.
But the firmware is very important: it should be Android 7, and not the 8 (I don't remember the exact firmware version).
This said, I wasted my time rooting this tablet, it's pretty useless. Apart removing two stock apps and installing AdAway, I was not able to do much more. Unfortunately, there are no custom rom to give a new youth to device.
I got all the prerequisites, try to flash twrp in recovery but get the error: the partition table doesn't exist. Is there any solutions for this?

Categories

Resources