Hello...
I have updated my samsung s3 gt-i9300 using OTA from android stock to 4.1.1 android version, i found that the led indicator does not work
Plz..can any one help me...
Plzzzzzzzzzzzz
How?
LED doesn't work at all or it fades?
Did you try rebooting?
Sent from my GT-I9300 using xda premium
excuse my language.
when i reboot the phone, the LED works normally.
but it doesn't work with messages or missed calls or etc..
knowing that all check boxes of the LED indicator are checked (in the LED indicator settings).
ashrafmedlej said:
excuse my language.
when i reboot the phone, the LED works normally.
but it doesn't work with messages or missed calls or etc..
knowing that all check boxes of the LED indicator are checked (in the LED indicator settings).
Click to expand...
Click to collapse
Hey,
if it happens again, type *#0*# and click on LED. It will test your LED, you only have to click on the screen to change the color. After three colours, it is tested. If you can't activate the call LED in settings, try to reset or reflash your phone!
TheRealFelix0212 said:
The best way to reset ya phone is to go in to your Stock Recovery ( Vol. Up + Home Button + Sleep/Wake). There you have to choose "wipe data/factory reset" with "Vol. Down Button". Confirm with the "Sleep/Wake Button". Now you have to confirm that you want to wipe your phone. Use the "Vol. Down Button" again,choose something like "Yes, wipe all
users" and confirm with "Sleep/Wake Button"!
Click to expand...
Click to collapse
ALL DATA WILL BE LOST!! On your internal Storage (sdcard0, not extSDCard) too!!!
I'm not responsible for any damages on your device!
Greetings....
i am really thankful..
but unfortunately
i tested the LED and it work (from *#0*#), andi got the same result (not working with messages and missed calls and etc...).
then i made factory reset from the stock recovery, also i got the same result.
any other solution???
ashrafmedlej said:
i am really thankful..
but unfortunately
i tested the LED and it work (from *#0*#), andi got the same result (not working with messages and missed calls and etc...).
then i made factory reset from the stock recovery, also i got the same result.
any other solution???
Click to expand...
Click to collapse
Did you turn on Blocking Mode or Power saving mode?
Sent from my GT-I9300 using xda premium
no the "Blocking mode" and the "Power saving" are disabled..
note: also the front camera and the vibration are not working in my phone
ashrafmedlej said:
no the "Blocking mode" and the "Power saving" are disabled..
note: also the front camera and the vibration are not working in my phone
Click to expand...
Click to collapse
I think you better download the latest 4.1.2 version and flash it via odin
Sent from my GT-I9300 using xda premium
Should i flash a custom 4.1.2 rom or there is a stock 4.1.2 rom
Look for the Wanam version of XXELKC in the General section....
ashrafmedlej said:
Should i flash a custom 4.1.2 rom or there is a stock 4.1.2 rom
Click to expand...
Click to collapse
Yes there is official stock rom 4.1.2 XXELKC. ...Poland rom
Sent from my GT-I9300 using xda premium
Hey guys.. I've been having some real trouble with my LED Notifications. Let me give you the gist.
- Battery Light = Working
- Notification Light = Worked for about 2 Weeks after I got the C10 mod, hasn't worked since..
I've done all the basic things I could do.. Went through settings, and rebooted.. I really was just hoping for a quick fix and to realize I was just stupid, but I don't think that's the case. Anyone that can help, please give out a shout. Thanks!
Samsung Galaxy S3 i717 (AT&T) - Rooted - C10 Mod
Have you, by any chance, dropped the phone or made it shock abruptly? Because where I live, many around me, including myself, have seen LED capability die entirely on our i9305 and i9300 Samsung devices.
Face it: It's **** hardware. Crappy produce. Non-lasting, profit-based disposable plastic garbage. Ensuring infinite growth on a finite planet. Which is why we will ALL be gone in, say, 2040.
Related
Just wondered if theres any apps out there which add more LED options? Maybe frequency and colour change?
https://play.google.com/store/apps/...oid.lightflowlite&feature=more_from_developer
JoNAsOS3 said:
https://play.google.com/store/apps/...oid.lightflowlite&feature=more_from_developer
Click to expand...
Click to collapse
"NOTE - the LED functionality does not work on most LG and Samsung phones."
Does it work with SGSIII?
Yes, it works, but unfortunately it looks like it causes huge battery drain.
Gesendet von meinem GT-I9300 mit Tapatalk 2
As mentioned light flow is pretty awesome!
sent from my Galaxy S III
Coreym said:
As mentioned light flow is pretty awesome!
sent from my Galaxy S III
Click to expand...
Click to collapse
I couldn't seem to get light flow (free) to work on my S3, or it didn't change the colour anyway. Does it need root?
rendez2k said:
I couldn't seem to get light flow (free) to work on my S3, or it didn't change the colour anyway. Does it need root?
Click to expand...
Click to collapse
same , i tried it yesterday and couldnt get it to work (not rooted)
chriskinetic said:
same , i tried it yesterday and couldnt get it to work (not rooted)
Click to expand...
Click to collapse
Yeah, lightflow asks for root.
thanks,hows the warranty effected on rooting the S3 ? is there any "official" word ?
chriskinetic said:
thanks,hows the warranty effected on rooting the S3 ? is there any "official" word ?
Click to expand...
Click to collapse
Good point - I was going to root last night then thought I'd be screwed if something goes wrong with the phone!
yeah thats what im waiting for , really dont want to void the warranty on a few day old phone by rooting it
Well you can always restore the phone to factory settings, reset the flash counter and unroot which isnt that hard tbh and then nobody would ever no you rooted or flashed another ROM and to your warranty would be intact!
Im going to try out this app now cheers guys!
I confirm Led Flow works with my galaxy S3 base on the version DXLE 8
Sent from my GT-I9300 using xda premium
lzj676 said:
I confirm Led Flow works with my galaxy S3 base on the version DXLE 8
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Is your phone rooted?
Can't get it to work properly, it will blink once when I get a text. Then it stops.
HaruSoul said:
Can't get it to work properly, it will blink once when I get a text. Then it stops.
Click to expand...
Click to collapse
Go to lightflow and make sure that your SMS notification is set to stop "when notified app is open" (or something like that)
Mopral said:
Go to lightflow and make sure that your SMS notification is set to stop "when notified app is open" (or something like that)
Click to expand...
Click to collapse
It is set to "App entered"
---------- Post added at 10:52 AM ---------- Previous post was at 10:43 AM ----------
I have SMS setup to blink green. Here is what happens
Green light comes on
Screen turns on for like 5 seconds showing the lockscreen and the new message
Green light comes on for a short duration
Red light comes on even shorter.
No more blinks.
I recommend lightflow lite..it is free and work perfectly with sgs3
Sent from my GT-I9300 using Tapatalk 2
Your phone doesn't need to be rooted to run light flow.
The issue with SMS showing and then stopping is due to the way it's monitored.
The Samsung SMS app causes the app to pop-up when a new text comes in. Doing this causes lightflow to think the app has been entered and cancels the notification straight away.
Could you try switch on "alternate off monitoring". That's what's needed for some other apps the have a pop-up like this.
I've got an s3 to test this out on, but I haven't got around to cutting a sim card down yet to try out the phone functionality. I plan to do that before releasing lightflow release 3.
To avoid battery drain make sure you set "notification type" TO "Show latest only" in general settings of light flow.
Hi!
I'm using a recent CM9 nightly with default kernel.
I would like to have your opinion : about 3/4 a week my SGS3 is "stuck" when it's locked : impossible to wake up using home or power button, the screen stays black.
The weird thing is that when it happens, the phone is not frozen : I can still hear music on the headphones and control volume using Up/Down buttons.
Sometimes I let it stuck and receive a notification some minutes later and the phone magically can be unlocked again, screen wakes when I push Home button.
Very weird and annoying when that happens.
My question is : what do you think it could be? An app? How can I debug this and know what prevents the screen to wake up when that happens?
Thanks.
Wipe and reflash the rom
zodiaxe66 said:
Wipe and reflash the rom
Click to expand...
Click to collapse
Thanks, but is that the kind of easy answer you all tell when you don't know the exact answer?
When I installed CM9 a week ago, I did do a full wipe...
I think that next time it happens, I will try to connect my SGS3 on USB and do a adb logcat, maybe I'll find useful information.
Have you tinkered with any of the could settings or voltage settings?
Sent from my GT-I9300 using xda premium
ricey1986 said:
Have you tinkered with any of the could settings or voltage settings?
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Nope
slainer68 said:
Nope
Click to expand...
Click to collapse
Having a similar problem to yourself. Installed CM9 rom had a play and then went back to omegaV9 performing a full wipe using the instructions on this site before reflashing.
Since then when my phone is locked screen off then i unlock either via swipe or using security code (digits ) it looks like the phone unlocks but sort of does a warm boot with black screen for a few seconds with the two buttons down the bottom light up.
When it starts it looks like all the apps have stopped and are restarting again.
I re flashed again omega 9 thought i had it sorted but it started playing up again this evening.
If anyone has any ideas please post..
Hi, I'm a newbie here. I also exprience this problem with my samsung GT-i9300. I hoping to see a fix with this problem.
This forum has been so helpful to new android users. Thank you guys.
Hallo XDA Friends,
I have a problem with the LED on my month old s3 ( euro unbranded )
Everything was going great with the LED I Installed Light flow everything was still fine.
I updated to JB official stock rom as i am unrooted, and since then the LED only works when
i boot up the phone and when i use the Test utility ( red green blue ) colours. With lightflow uninstalled
and no LED management software still nothing works. Also not with screen off.
Now I am stuck because it clearly is not a Hardware problem as It works on boot and in test mode,
But not in anny other situation.
I hope someone here can help me and thanks in advance!
check lightflow in the accessibility settings.
if done already to go lightflow settings > uncheck enable lightflow > close app.
open light flow again and enable lightflow.
Sent from my GT-I9300 using xda premium
Still not working
bordikun said:
check lightflow in the accessibility settings.
if done already to go lightflow settings > uncheck enable lightflow > close app.
open light flow again and enable lightflow.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
I followed your instructions and it is still not working somehow. I also tried
doing the internal Lightflow test ( all LED test ) and nothing happens when i
turn off the screen ?
Got anny other ideas ? am i the only one on this planet with this problem ^^
Thanks
Disignual said:
I followed your instructions and it is still not working somehow. I also tried
doing the internal Lightflow test ( all LED test ) and nothing happens when i
turn off the screen ?
Got anny other ideas ? am i the only one on this planet with this problem ^^
Thanks
Click to expand...
Click to collapse
Hi,
First, download Light Manager on play store, use this app, not include in sammy rom.
If you are rooted, try Siyah Kernel, go to STweak, Misc > Notification > Fading.
Now, all is okay, no problems
Uncheck Lightflow in rom settings, or a big battery drain will coming...
Sorry for my awful english ^^'
Still not working
Toshiro-Sama said:
Hi,
First, download Light Manager on play store, use this app, not include in sammy rom.
If you are rooted, try Siyah Kernel, go to STweak, Misc > Notification > Fading.
Now, all is okay, no problems
Uncheck Lightflow in rom settings, or a big battery drain will coming...
Sorry for my awful english ^^'
Click to expand...
Click to collapse
I Have tried this also. No luck. I am not rooted. I really just dont understand as the LED works on boot and
in the utility device Test.. Somehow it seems that any other test / usage of the LED doesnt work exept for that..
this should be checked in the settings > display > LED indicator > Notifications
Sent from my GT-I9300 using xda premium
Has been
bordikun said:
this should be check in the settings > display > LED indicator > Notifications
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
It has been the whole time :/
well can't think of any thing else.
but might give it a try. uninstall lightflow and reinstall do not restore from backup
Sent from my GT-I9300 using xda premium
:/
bordikun said:
well can't think of any thing else.
but might give it a try. uninstall lightflow and reinstall do not restore from backup
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
I dont know what to do thank you though Maybe annyone ells can help me!
EDIT - I JUST READ THAT SINCE JELLY BEAN THE LED IS MANAGED BY THE LIGHT SENSOR
MY LIGHT SENSOR ALWAYS SAYS 0 AND CAN NOT ADJUST BRIGHTNESS OF SCREEN DUE TO
WATER DAMAGE.
Is there a way to turn off the Light sensor or enter a value that it "emulates " ?
Still need help
Problem Still persists !
MY LIGHT SENSOR ALWAYS SAYS 0 AND CAN NOT ADJUST BRIGHTNESS OF SCREEN DUE TO
WATER DAMAGE.
Pointless asking then its a hardware repair .
jje
JJEgan said:
MY LIGHT SENSOR ALWAYS SAYS 0 AND CAN NOT ADJUST BRIGHTNESS OF SCREEN DUE TO
WATER DAMAGE.
Pointless asking then its a hardware repair .
jje
Click to expand...
Click to collapse
I dont understand even though the LED is clearly working when i boot and test it ?
All,
I upgraded to jelly bean via the CNET UK guide and now I do not have led light notifications i have tried installing third party apps to force it but my phone still does not display an led notification. The only time it works is when a call comes through or if it is charging
Also most of the mmi codes don't seem to work? Any help would be much appreciated
Cheers
Grant
Yeah it doesnt work when getting a messsage..
Sent from my GT-I9300 using xda app-developers app
Did you turn the notifications on in the Settings menu? It's under "Display" in Jellybean. I know it's an obvious answer but, sometimes, the most obvious answer eludes the best of us!
Okay it worked it blinks every 5 sec
Sent from my GT-I9300 using xda app-developers app
Grantgibson45 said:
All,
I upgraded to jelly bean via the CNET UK guide and now I do not have led light notifications i have tried installing third party apps to force it but my phone still does not display an led notification. The only time it works is when a call comes through or if it is charging
Also most of the mmi codes don't seem to work? Any help would be much appreciated
Cheers
Grant
Click to expand...
Click to collapse
I restored the factory defaults and JB remained. Now the LED is working.
Does anyone know how to use the front key lights as notification led's on our L9 since we don't have one? I found out how to use the camera flash as one but that's the back of the phone and i don't like facing the phone screen face down on anything in fear of scratching the screen.
If there is not a method already around somewhere to do this, how hard would it be to get this working? I think it would be a great asset to our L9s!
R: [Q] Notification LED
Use LG Notifications from Playstore. It's free but requires root.
Sent from my LG-P760 using xda app-developers app
I tried that before posting and it didnt work :/
mjb1994 said:
Does anyone know how to use the front key lights as notification led's on our L9 since we don't have one? I found out how to use the camera flash as one but that's the back of the phone and i don't like facing the phone screen face down on anything in fear of scratching the screen.
If there is not a method already around somewhere to do this, how hard would it be to get this working? I think it would be a great asset to our L9s!
Click to expand...
Click to collapse
How do you use the flash for notifications?
Sent from my LG-P769 using Tapatalk 2
Juanito216 said:
How do you use the flash for notifications?
Please try the NOLED app. Probably a better option. Tried on my HTC Glacier. Works.
https://play.google.com/store/apps/details?id=com.led.notify&feature=search_result#?t=W251bGwsMSwxLDEsImNvbS5sZWQubm90aWZ5Il0.
Click to expand...
Click to collapse
mjb1994 said:
I tried that before posting and it didnt work :/
Click to expand...
Click to collapse
Works for me.
How does it behave for you? On my L9 nothing changed at all once installed and enabled :/ What settings did you choose? Do they flash after the screen turns off for awhile after the notification, and stay flashing until they are read??
mjb1994 said:
How does it behave for you? On my L9 nothing changed at all once installed and enabled :/ What settings did you choose? Do they flash after the screen turns off for awhile after the notification, and stay flashing until they are read??
Click to expand...
Click to collapse
I just chose the default settings, and it flashes the front key lights till the message is read. Maybe cause I'm using P760 V10h on my P765.
The app is a battery drainer since it wakes the cpu up each time the buttons light up.
Im hoping they can program this feature into future roms for the L9 where it just causes the LED's to blink until the screen is turned back up when a notification is received. Not sure if its possible to program the blinking to run without waking the cpu?
That was another concern of mine, but if it was integrated into the rom in such a way to not wake the cpu then battery life would not be affected as much.