I had downloaded a version of this file from a post embedded deep inside one of the threads over here (sorry can't find it right now), but upon examination of its contents, I discovered some issues:
1. The checksums on the files in contained in the the original zip file showed that B&N had at least two versions of 1.3.0 update you can download from them, and the zip I got contained an older version so I put in the latest files in there.
2. There were unnecessary files included inside the original zip file, I deleted those, and only included what was needed.
3. There were errors in the script syntax, which I corrected, so that the proper commands are run during the update, and the proper sed substitutions are made during the editing of the unpacked init.rc inside the ramdisk.
What this zip will do is replace any older version of a B&N ROM on the alternate eMMC partitions of a dual booting configurations to the latest versions. This will prevent B&N from pushing the 1.3.0 update to you OTA, and messing up your dual boot setup. Just put the zip on your sdcard, boot into CWM recovery, and apply the zip. I apologize in advance for not giving credit to the original creators of the scripts here.
Note: There have been two different protocols for a dual booting u-boot.bin, with an older one relying on the files u-boot.altimg, and u-boot.altram to specify the names of the secondary boot ramdisk and kernel, and a newer one assuming that they are named uAltRam, and uAltImg respectively. This update conforms to the new u-boot.bin protocol. If you are still using the old one, you will have to get root access to /boot and edit the two files to point to uAltRam and uAltImg.
So if you want try it out, here it is:
http://www.mediafire.com/?gcrpzzc0kdoxcjx
MD5 Sum: 51e24c1e5eff11ba5ea481a63f7404eb
Update
I have now uploaded files for B&N Update 1.4.1.
The first file (MD5 Sum: 4ff1d9764663278c3f51e2e2c9d841a6) is meant to update a pre 1.4.1 Stock B&N ROM on secondary /system through CWM:
https://rapidshare.com/files/52135913/secondary_update_NC_stock_1_4_1.zip
The second file (MD5 Sum: c1506816fbfb8c419fbbc4afe1b12887) is meant to update a pre 1.4.1 Stock B&N ROM on primary /system through CWM without messing with recovery;
https://rapidshare.com/files/869435270/primary_update_NC_stock_1_4_1_keep_CWM.zip
The third file (MD5 Sum: ab1307c55a2c35c91d339c8037ce9a78) is meant to update a pre 1.4.1 Stock B&N ROM on primary /system through CWM, replacing recovery and all:
https://rapidshare.com/files/2059644016/primary_update_NC_stock_1_4_1.zip
None of these files will wipe user apps and data, so if you wish to do that, boot into recovery and wipe from there. [This will work on primary /data partition only]
Please note: If the B&N Stock ROM is rooted, you will lose root upon updating.
Thanks!
This worked beautifully! I flashed it from my sdcard after booting into CWM on my primary partition on emmc.
I'm betting you got the original from jasoraso in this dual boot thread: http://forum.xda-developers.com/showpost.php?p=17122342&postcount=142
What I would love is a straight CWM-flashable 1.3 ROM, to include in my up-to-date (for now) guide for setting up the dual boot, rather than having to set up and move 1.2, then update to 1.3.
That is possible to do by combining three of the steps. You need commands from the scripts from the prepare dual boot zip to resize /media and create the secondary system and data partitions, then the part of the script from the file that copies the contents of /data from primary to secondary and replaces u-boot.bin , and then my file which formats secondary /system and puts 1.3.0 there, and copies the latest kernel and patched ramdisk onto /boot. I can put such a file together, but I wouldn't be able to test it. The Nook belongs to my wife, and and you get the rest of the drift.
PS - You can use my file as is after running prepare dual boot and copy stock to secondary. It is not necessary to update secondary to 1.2 before going to 1.3.
Sent from my SAMSUNG-SGH-I897 using XDA App
rajendra82 said:
That is possible to do by combining three of the steps. You need commands from the scripts from the prepare dual boot zip to resize /media and create the secondary system and data partitions, then the part of the script from the file that copies the contents of /data from primary to secondary and replaces u-boot.bin , and then my file which formats secondary /system and puts 1.3.0 there, and copies the latest kernel and patched ramdisk onto /boot. I can put such a file together, but I wouldn't be able to test it. The Nook belongs to my wife, and and you get the rest of the drift.
Click to expand...
Click to collapse
Wait...what? What I'm talking about is a 1.3 zip made to work with CWM and in no way doctored to account for dual booting, just like the 1.2 zip one would otherwise use.
rajendra82 said:
PS - You can use my file as is after running prepare dual boot and copy stock to secondary. It is not necessary to update secondary to 1.2 before going to 1.3.
Click to expand...
Click to collapse
Have you tested this theory? I found that when I did not register my B&N install while it was on the primary partition, I was unable to boot into it on the secondary partition.
Taosaur said:
Wait...what? What I'm talking about is a 1.3 zip made to work with CWM and in no way doctored to account for dual booting, just like the 1.2 zip one would otherwise use.
Click to expand...
Click to collapse
Are you talking about updating an already rooted 1.0/1.1/1.2 Nook Color. I am sure the scripting to do that is exactly the same as what is in the 1.2 zip file. Just replace the 1.2 files inside the zip with the equivalent files from the 1.3 update. Make sure the portions which install su and busybox are included, and build.prop spoofig is applied. I am not sure it is worth it building such a zip file though. One is better off just applying the B&N update, and then rerooting with manual nooter. What I created was for people that have already doctored the setup for dual booting. In such a case, the B&N update would either fail, or would replace the primary partition instead.
Taosaur said:
Have you tested this theory? I found that when I did not register my B&N install while it was on the primary partition, I was unable to boot into it on the secondary partition.
Click to expand...
Click to collapse
No way to get around having to register the primary partition image first. Once that is done it could be moved to secondary and then updated straight to 1.3 instead of going 1.2 first.
I have a dual boot eMMC NC. I am not sure which setup I use but the last time I updated the CM7 nightly, I lost the dual boot until I installed the u-Boot again. I suspect I have the setup that looks for altFImg. So this is not going to work for me. I have 1.2 rooted which I use only occasionally. I am not even sure what is in 1.3 but I am curious.
yelloguy said:
I have a dual boot eMMC NC. I am not sure which setup I use but the last time I updated the CM7 nightly, I lost the dual boot until I installed the u-Boot again. I suspect I have the setup that looks for altFImg. So this is not going to work for me. I have 1.2 rooted which I use only occasionally. I am not even sure what is in 1.3 but I am curious.
Click to expand...
Click to collapse
All you need to do is boot into CM7, mount /boot as root, and then rename uFImg to uAltImg, uFRam to uAltRam, and then change the text inside u-boot.altimg and u-boot.altram to point to the new names instead of the old ones. This will keep you dual booting under the old u-boot.bin, and even after a new protocol u-boot.bin (like that installed by CM7) gets pushed to your Nook Color. Once you have done that, you can update the secondary to 1.3 using my zip file if you want.
rajendra82 said:
Are you talking about updating an already rooted 1.0/1.1/1.2 Nook Color. I am sure the scripting to do that is exactly the same as what is in the 1.2 zip file. Just replace the 1.2 files inside the zip with the equivalent files from the 1.3 update. Make sure the portions which install su and busybox are included, and build.prop spoofig is applied. I am not sure it is worth it building such a zip file though. One is better off just applying the B&N update, and then rerooting with manual nooter. What I created was for people that have already doctored the setup for dual booting. In such a case, the B&N update would either fail, or would replace the primary partition instead.
Click to expand...
Click to collapse
I wouldn't know what to change and what to leave alone, myself, but I think you're making this more complicated than it needs to be. I'm talking about installing 1.3 using CWM, regardless of how the device is partitioned or what was on the primary partition previously. Like the files in this thread, but 1.3: http://forum.xda-developers.com/showthread.php?t=1050520.
I understand that you were just cleaning up jaso's update-dualboot-to-1.3 file. I used the original and it worked fine, but it would have saved me a couple steps (and would be more useful in a guide for setting up dualboot) to simply install 1.3 rather than 1.2 to the primary partition when setting up. The reason I started with 1.2 is because it is the most current stock ROM available for CWM. What I would like is to avoid a historical re-enactment of stock OS development altogether. A general-purpose, CWM-flashable 1.3 ROM would be broadly useful, but is so far lacking as far as I've seen.
1. Do you envision this to be an uprooted stock 1.3 update ROM (either as primary or the only boot option) ? I just don't see the need for this to be CWM flashable. It is very easy to get there by resetting the device to stock, and then updating the device to 1.3.0 using the B&N file, and restoring dual boot as need be. If one has any older stock ROM running on primary, the B&N update will get them to 1.3 while losing root. There is no need to apply 1.2 update first.
2. Do you envision this to be for already rooted single or primary booting 1.1/1.2 users? There is once again no need to create any file for this. One can simply apply the B&N update, and then rerun manual nooter, and restore dual booting to the secondary.
3. The only users with no clear upgrade path are those who have already moved the B&N ROM to secondary. That's why I fixed up the zip file, and shared it. I am glad the original file worked for you despite the script errors. I can see other setups where it would have failed though.
I am not trying to make this more complicated than it needs to be. The Nook Color is just capable of being set up in so many ways, there isn't simply going to be a single update method that will work in all scenarios.
Sent from my SAMSUNG-SGH-I897 using XDA App
I'm envisioning it as a one step, starting-point-agnostic means of establishing a 1.3 stock install, whether for setting up a dualboot or for any other purpose. Its usefulness is made evident by the three-page thread devoted to CWM-flashable 1.2 images: http://forum.xda-developers.com/showthread.php?t=1050520
Taosaur said:
I'm envisioning it as a one step, starting-point-agnostic means of establishing a 1.3 stock install, whether for setting up a dualboot or for any other purpose. Its usefulness is made evident by the three-page thread devoted to CWM-flashable 1.2 images: http://forum.xda-developers.com/showthread.php?t=1050520
Click to expand...
Click to collapse
Then the best bet is two step process:
1. Wipe device and restore to factory stock.
2. Download B&N 1.3 update file from website and place it on the root of SD card. Let the device recognize it, and apply it.
Once the 1.3 update gets applied, you are free to reroot, install CWM, set up dual booting, or whatever the next step may be.
It is the only method that will work in all circumstance as it involves starting from scratch regardless of setup. If want to preserve any of your current setup, no one step file will work for all circumstances. Some people have the stock firmware rooted, others do not. Some have the stock as the only internal boot, others have it as primary option of a dual booting configuration, while others have it as a secondary option. Some have stock recovery and run CWM off the sdcard when needed and want to update their recovery to the latest stock version, others want to keep the CWM recovery, and not update the recovery. There simply is no way file to cope with all these options.
rajendra82 said:
All you need to do is boot into CM7, mount /boot as root, and then rename uFImg to uAltImg, uFRam to uAltRam, and then change the text inside u-boot.altimg and u-boot.altram to point to the new names instead of the old ones. This will keep you dual booting under the old u-boot.bin, and even after a new protocol u-boot.bin (like that installed by CM7) gets pushed to your Nook Color. Once you have done that, you can update the secondary to 1.3 using my zip file if you want.
Click to expand...
Click to collapse
You lost me at mount
Seriously, I am trying to see if what I have is compatible with your update before I apply the update. I have a couple of useful apps on my CM7 and I have lost the password. I don't want to be stuck without CM7 or start over again. I can live without the 1.3 update though. So I want to make sure I am up to the task of finding and renaming these files if I have to.
With that said, how do I mount the /boot partition? I go into terminal emulator and give the su command. Then I tried mount /boot but that didn't work.
Thanks for your help.
rajendra82 said:
1. Wipe device and restore to factory stock.
Click to expand...
Click to collapse
...the only means of doing so "that will work in all circumstance" and in any way resembles a single step is flashing a stock zip via CWM. Why not use an up-to-date zip? The usefulness of such files is demonstrated by the fact that:
such files exist for past stock versions
those files are in use
files like yours are used to work around the non-existence of up-to-date stock zips
If you're so comfortable working with update files, you very likely could have produced such a file in less time than you've spent rationalizing away the clearly demonstrated need for them. Tell you what, in all likelihood I can just swap a few files from B&N's 1.3 zip into the existing CWM-flashable 1.2 zips, correct? Which files do I replace?
Anyone?
---------- Post added at 02:15 PM ---------- Previous post was at 01:58 PM ----------
yelloguy said:
You lost me at mount
Seriously, I am trying to see if what I have is compatible with your update before I apply the update. I have a couple of useful apps on my CM7 and I have lost the password. I don't want to be stuck without CM7 or start over again. I can live without the 1.3 update though. So I want to make sure I am up to the task of finding and renaming these files if I have to.
With that said, how do I mount the /boot partition? I go into terminal emulator and give the su command. Then I tried mount /boot but that didn't work.
Thanks for your help.
Click to expand...
Click to collapse
I don't know for sure, but wouldn't rajendra's update create properly-named boot files alongside the old, improperly named ones? Wouldn't the multiboot built in to recent CM7 builds then look for and boot from the more recent, properly named files? I can't confirm that's how it would work, but it's what I would expect.
Taosaur said:
I don't know for sure, but wouldn't rajendra's update create properly-named boot files alongside the old, improperly named ones? Wouldn't the multiboot built in to recent CM7 builds then look for and boot from the more recent, properly named files? I can't confirm that's how it would work, but it's what I would expect.
Click to expand...
Click to collapse
Yes they would create properly named boot files. But I suspect my nook looks for improperly named files since I updated my u-boot after the CM7 nightly update.
The fix is simple: to rename the files. But I need to know how before I take the plunge.
yelloguy said:
Yes they would create properly named boot files. But I suspect my nook looks for improperly named files since I updated my u-boot after the CM7 nightly update.
Click to expand...
Click to collapse
Right, but if you run a CM7 update, it would replace your uboot again. I'm not saying do it, just wondering out loud if it would work.
yelloguy said:
Yes they would create properly named boot files. But I suspect my nook looks for improperly named files since I updated my u-boot after the CM7 nightly update.
The fix is simple: to rename the files. But I need to know how before I take the plunge.
Click to expand...
Click to collapse
In order to rename the files, you can do the following:
1. Boot into CM7 (or any other place where you have command line root access)
2. Create a temporary directory at a location where you have read write access.
3. Type su in a terminal session to gain root access and then mount mmcblk0p1 at the temporary location you created using the command:
mount /dev/block/mmcblk0p1 <full path to the directory you created>
4. Now use Astro to go over to the directory you created and mounted mmcblk0p1 into. You should see:
u-boot.bin which is the bootloader
u-boot.bin.stock which is the backup of the old stock bootloader
uImage and uRamdisk which are your primary kernel and ramdisk
uFImg and uFRam which are your secondary kernel and ramdisk (and whose names are mismatching the CM7 bootloader protocol)
u-boot.altimg and u-boot.altram, which are text files per the old bootloader method containing names of uFImg and uFRam
5. Rename uFImg to uAltImg, uFRam to uAltRam. And edit the contents of u-boot.altimg and u-boot.altram to match the new file names.
6. Reboot as usual into primary or secondary.
Now if an CM7 update ever replaces your u-boot.bin, you will not lose dual boot, as you have it set up as uAltImg and uAltRam per the new protocol.
Sent from my SAMSUNG-SGH-I897 using XDA App
---------- Post added at 03:24 PM ---------- Previous post was at 03:06 PM ----------
Taosaur said:
...the only means of doing so "that will work in all circumstance" and in any way resembles a single step is flashing a stock zip via CWM. Why not use an up-to-date zip? The usefulness of such files is demonstrated by the fact that:
such files exist for past stock versions
those files are in use
files like yours are used to work around the non-existence of up-to-date stock zips
If you're so comfortable working with update files, you very likely could have produced such a file in less time than you've spent rationalizing away the clearly demonstrated need for them. Tell you what, in all likelihood I can just swap a few files from B&N's 1.3 zip into the existing CWM-flashable 1.2 zips, correct? Which files do I replace?
Anyone?
Click to expand...
Click to collapse
I am sorry if you think I am rationalizing, but that was not my intention. I just wanted to point out that the files you linked to do not meet your own criteria.
Take for example the file update-nc-stock-1.2-keepcwm-signed.zip that you point to as missing in an up to date 1.3 version. That file will update a Nook Color to 1.2, but will keep CWM recovery. It however will make someone whose Nook Color 1.1 was rooted using autonooter lose root. A person that has been dualbooting to CM7 on secondary will lose that ability as well after applying that update. So unlike what you think, this is not a file to update stock 1.2 update under all circumstances regardless of what the starting point is. It has a specific use (update fro, a pre 1.2 stock primary eMMC boot, no dualboot, CWM recovery installed). Creation of an all situation stock restore file is impossible IMO, and the best you can do is wipe and apply 1.3 B&N stock update. You or I could technically create another equivalent file with update-nc-stock-1.3-keepcwm.zip /system files, kernel, ramdisk, etc., but this file would be subject to the same side effects as the original.
---------- Post added at 03:30 PM ---------- Previous post was at 03:24 PM ----------
Taosaur said:
Right, but if you run a CM7 update, it would replace your uboot again. I'm not saying do it, just wondering out loud if it would work.
Click to expand...
Click to collapse
It would work. If you apply my zip, there will be a uAltImg and uAltRam in /boot (in addition to uFImg and uFRam). If you apply another update that pushes the CM7 bootloader, it will then look for these files with trying to do an alternate boot, and would boot into a unrooted stock 1.3.
rajendra82 said:
In order to rename the files, you can do the following:
1. Boot into CM7 (or any other place where you have command line root access)
2. Create a temporary directory at a location where you have read write access.
3. Type su in a terminal session to gain root access and then mount mmcblk0 at the temporary location you created using the command:
mount /dev/block/mmcblk0 <full path to the directory you created>
Click to expand...
Click to collapse
I get an error:
mounting <paths> failed: Device or resource busy
Any ideas?
yelloguy said:
I get an error:
mounting <paths> failed: Device or resource busy
Any ideas?
Click to expand...
Click to collapse
I see a typo in my command (stupid Swiftkey X). It should be:
mount /dev/block/mmcblk0p1 <some directory>
Also try typing just mount in terminal to see if /dev/block/mmcblk0p1 is already mounted somewhere else.
rajendra82 said:
Take for example the file update-nc-stock-1.2-keepcwm-signed.zip that you point to as missing in an up to date 1.3 version. That file will update a Nook Color to 1.2, but will keep CWM recovery. It however will make someone whose Nook Color 1.1 was rooted using autonooter will lose root. A person that has been dualbooting to CM7 on secondary will lose that ability as well after applying that update. So unlike what you think, this is not a file to update stock 1.2 update under all circumstances regardless of what the starting point is. It has a specific use (update fro, a pre 1.2 stock primary eMMC boot, no dualboot, CWM recovery installed). Creation of an all situation stock restore file is impossible, and the best you can do is wipe and apply 1.3 B&N stock update. You or I could technically create another equivalent file with update-nc-stock-1.3-keepcwm.zip /system files, kernel, ramdisk, etc., but this file would be subject to the same side effects as the original.
Click to expand...
Click to collapse
Riiiiight... it would install stock 1.3 to the device. That's the intended behavior. The point is to avoid the unnecessary step of updating in any process that includes flashing stock to the sole or primary partition. One example of such a process would be a fresh dual boot setup. That it does not update or otherwise rely upon an existing install is the point.
Granted, such a file would not repartition the device, but it would install up-to-date stock in one step regardless of how a device is partitioned (1/5, 2/5, 5/1 or dual boot).
Hi, I have new Prestigio tablet PMT5777_3G and I want to modify it's default ROM. I followed this tutorial: http://forum.xda-developers.com/showthread.php?t=1801690. I successfully extracted system folder, but I have no idea how to create updater-script for this specific ROM. If I understand correctly I need to get updater-script from original ROM.
I've got something that resembles original ROM, but it's folder structure is completely different from what I would expect.
I would expect:
META-INF
system
boot.img
I've got:
APDB_MT6582_S01_MAIN2.1_W10.24
boot-sign.img
BPLGUInfoCustomAppSrcP_MT6582_S00_MOLY_WR8_W1315_MD_WG_MP_V12_P4_1_wg_n
cache-sign.img
Checksum.ini
EBR1-sign
lk-sign.bin
logo-sign.bin
MBR-sign
MT6582_Android_scatter.txt
preloader_htt82_tb_jb5.bin
recovery-sign.img
secro-sign.img
system-sign.img
sro-lock-sign.img
sro-unlock-sign.img
userdata-sign.img
I'm an android developer, but have no experience with custom ROM's and now am in a situation, where I want to get that custom ROM up and running, but am unable, because I can't figure out how to create updater-script or extract it from files that I currently have. It would be great if someone could point me to the right direction of what to do next.
Thanks
P. S. It seems it's against the rules to ask questions here, but I can't seem to find where else to ask this on xda
Dantenas said:
Hi, I have new Prestigio tablet PMT5777_3G and I want to modify it's default ROM. I followed this tutorial: http://forum.xda-developers.com/showthread.php?t=1801690. I successfully extracted system folder, but I have no idea how to create updater-script for this specific ROM. If I understand correctly I need to get updater-script from original ROM.
I've got something that resembles original ROM, but it's folder structure is completely different from what I would expect.
I would expect:
META-INF
system
boot.img
I've got:
APDB_MT6582_S01_MAIN2.1_W10.24
boot-sign.img
BPLGUInfoCustomAppSrcP_MT6582_S00_MOLY_WR8_W1315_MD_WG_MP_V12_P4_1_wg_n
cache-sign.img
Checksum.ini
EBR1-sign
lk-sign.bin
logo-sign.bin
MBR-sign
MT6582_Android_scatter.txt
preloader_htt82_tb_jb5.bin
recovery-sign.img
secro-sign.img
system-sign.img
sro-lock-sign.img
sro-unlock-sign.img
userdata-sign.img
I'm an android developer, but have no experience with custom ROM's and now am in a situation, where I want to get that custom ROM up and running, but am unable, because I can't figure out how to create updater-script or extract it from files that I currently have. It would be great if someone could point me to the right direction of what to do next.
Thanks
P. S. It seems it's against the rules to ask questions here, but I can't seem to find where else to ask this on xda
Click to expand...
Click to collapse
Since you are a beginner to ROM development, I would recommend the use of dsixda's Android kitchen, which you probably have downloaded already. If not use this link
http://forum.xda-developers.com/showthread.php?t=633246
Follow these steps to obtain the file structure and Meta-Inf folder for your custom rom.
1. Open the folder where you have placed the kitchen.
2. You will find a folder called original_update.
3. Open that folder and copy your boot.img and system.img files into it. ( In your case it is boot-sign.img and system-sign.img. Rename those files into boot.img and system.img and place them in the folder )
4. Now open the kitchen. ( Refer the above link to know how to do it )
5. You will find " 1. Set up working folder from ROM " option under Main Menu.
6. Type 1 and you will be directed to another menu. Click Enter.
7. Select your boot.img and system.img from the menu.
8. Now follow the instructions that appear on the screen.
9. When you successfully complete the steps, you will have the required Working folder, with boot.img, system folder and Meta-Inf folder, which will contain the updater-script (It will be automatically generated)
All the best. :good:
Hit Thanks if this helped you... PM me if you need further help or search the forum for detailed instructions.
Thanks, this helped me, but I still can't create ROM.
I encountered a problem with kitchen:
Code:
Available ROMs:
(1) system.img and boot.img
Enter selection number (default=1, cancel=0, r=refresh):
Found original_update/system.img
Found original_update/boot.img
The new working folder will be named WORKING_061614_070841
Change the name (y/n)? (default: n):
Creating working folder WORKING_061614_070841 ...
Copying boot.img ...
Copying system.img ...
Adding an update-script ...
NON-YAFFS/NON-TAR FILE FORMAT DETECTED IN ROM
Mounting system.img to loopback device and then extracting files ...
Error: Unable to mount system.img
Error: No /system/framework folder found!
Press Enter to continue
This creates my missing update-script and boot.img, but system folder is empty.
Would it be a good idea to extract all system files from device and attempt to create ROM with them, and this update-script, or is there something I could do with system.img to make it extract?
Try this
Don't worry. There's always an alternative. Try this simple method.
1. Boot into CWM (Clockwork Mod) Recovery. (I'm pretty sure you know how to do it, if not, you can feel free to search the forum)
2. Choose Backup and Restore.
3. Make a backup in your external sdcard.
4. Now boot normally, open your external sdcard. You will find a folder called clockworkmod. Copy that folder to your PC.
5. Inside that folder, you will find the backup.
6. Now, copy boot.img and system.ext4.tar.a to your original_update folder of the kitchen.
7. Warning! Do not copy system.ext4.tar, only copy system.ext4.tar.a
8. Once you have copied these two files, rename system.ext4.tar.a into system.ext4.tar
9. Now, open android kitchen and follow the exact same steps as you did before.
10. When you choose the available rom, you will find the screen as below.
Code:
Available Roms:
(1) system.ext4.tar and boot.img
11. Choose it and follow the instructions. You will have your required working folder.
Try this and let me know if you still face any issues. :good:
I was unable to load CWM recovery, because it is not supported by my device. I tried TWRP too, which also doesn't support my device. Is it possible to do without CWM?
Dantenas said:
I was unable to load CWM recovery, because it is not supported by my device. I tried TWRP too, which also doesn't support my device. Is it possible to do without CWM?
Click to expand...
Click to collapse
I'm sorry my friend, even if you create your own ROM, you require either one of them to flash the ROM to your device. Seeing you so keen on developing the rom, try to use any yaffs tool to create your system.img from extracted system folder. You may refer this thread.
http://forum.xda-developers.com/showthread.php?t=1645412