installing the kernel.
http://forum.xda-developers.com/showthread.php?t=1426145
out error
C:\>fastboot flash boot C:\A\JetStream-HC-DooMKernel-v01.img
sending 'boot' (3882 KB)...
FAILED (command write failed (No such device or address))
finished. total time: 0.023s
what is the problem please tell me
Kernel version
2.6.35.10-g4612ecf
[email protected]#1
CMP PREEMPT Mon aug 15 11:50:20 CST 2011
Related
C:\Users\Raz\Desktop\rootevogood\rootevo3dnew>fastboot flash unlocktoken Unlock_
code.bin
sending 'unlocktoken' (0 KB)...
OKAY [ 0.152s]
writing 'unlocktoken'...
(bootloader) unlock token check successfully
OKAY [ 0.008s]
finished. total time: 0.161s
C:\Users\Raz\Desktop\rootevogood\rootevo3dnew>fastboot flash recovery cwm-4.0.1.
4-shooter.img
sending 'recovery' (4832 KB)...
OKAY [ 1.133s]
writing 'recovery'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 1.747s
what am i doing wrong can someone pls help hboot 1.5 s-on all i wanna do is flash roms and kerns...but i must be doing something wrong
The code is APPLE.
but seriously wtf are you trying to do.
Sent from my PG86100 using Tapatalk 2
He is trying to unlock the bootloader via htcdec way
Sent from my PG86100 using xda premium
gotraz said:
C:\Users\Raz\Desktop\rootevogood\rootevo3dnew>fastboot flash unlocktoken Unlock_
code.bin
sending 'unlocktoken' (0 KB)...
OKAY [ 0.152s]
writing 'unlocktoken'...
(bootloader) unlock token check successfully
OKAY [ 0.008s]
finished. total time: 0.161s
C:\Users\Raz\Desktop\rootevogood\rootevo3dnew>fastboot flash recovery cwm-4.0.1.
4-shooter.img
sending 'recovery' (4832 KB)...
OKAY [ 1.133s]
writing 'recovery'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 1.747s
what am i doing wrong can someone pls help hboot 1.5 s-on all i wanna do is flash roms and kerns...but i must be doing something wrong
Click to expand...
Click to collapse
Did you unlock it fine? Get that unlock bootloader splash screen?
Admittedly I am still a noob and learning a lot via these forums, If you are trying to unlock your bootloader via HTCDev visit android forums and search in the HTC EVO 3d section "Complete Newbie's Guide to rooting and flashing ROMs/Kernels using fastboot" by JeroFld this newbie guide will help, It helped me alot.
================================================== =========================
Device: HTC EVO 3D AKA 3VO
Rom: ZR3Dv2.2A
Kernel: 2.6.35.13-g277012f [email protected] #1 SMP PREEMPT Mon Dec 12 15:59:16 CST 2011
Recovery: 4EXT
Baseband: 1.06.00.1216
Build Number: 2.17.651.5 CL245066 release-keys
Android Version: 2.3.4
HTC Sense Version: 3.0
H.Boot 1.5 Unlocked
S-On
gotraz said:
C:\Users\Raz\Desktop\rootevogood\rootevo3dnew>fastboot flash unlocktoken Unlock_
code.bin
sending 'unlocktoken' (0 KB)...
OKAY [ 0.152s]
writing 'unlocktoken'...
(bootloader) unlock token check successfully
OKAY [ 0.008s]
finished. total time: 0.161s
C:\Users\Raz\Desktop\rootevogood\rootevo3dnew>fastboot flash recovery cwm-4.0.1.
4-shooter.img
sending 'recovery' (4832 KB)...
OKAY [ 1.133s]
writing 'recovery'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 1.747s
what am i doing wrong can someone pls help hboot 1.5 s-on all i wanna do is flash roms and kerns...but i must be doing something wrong
Click to expand...
Click to collapse
when you wrote unlock code.bin , it should ask you to confirm, on your phone's screen , after that your bootloader will be unlocked and you can flash recovery later.
If you aren't getting the confirmation screen , running RUU might help
mnomaanw said:
when you wrote unlock code.bin , it should ask you to confirm, on your phone's screen , after that your bootloader will be unlocked and you can flash recovery later.
If you aren't getting the confirmation screen , running RUU might help
Click to expand...
Click to collapse
Running the latest 2.17 RUU will help if your CDMA.. Sounds like your phone was never unlocked..
Hi there again Reaper24 & everyone.
If the op is still trying to unlock on hboot 1.50 they may find the guide in my signature helpful. Like Reaper24 said, if u r stuck at step 13 of the unlock process, u need to rerun the full Ruu all the way thru and try again.
Sent from my PG86100 using Tapatalk
In short, I'm looking for a backup that can be used to restore a SCH-i905 (Verizon LTE) to Honeycomb 3.2. A rooted backup is ideal, but anything that works is better than the soft bricked device I have now. =)
History follows. I received this device from a client in the US to test an Android app on Honeycomb. It came with Honeycomb 3.0.1, but many apps were failing to boot, including the App I'm developing. Figuring it was the OS, I tried to upgrade it but this proved difficult. I can not get OTA updates outside of the US, and I am on a Mac without bootcamp so I can not use Odin. Heimdall failed. Kies probably does not work with Mountain Lion, although I should have checked.
The tablet was manually rooted using adb. CWM was installed with ROM Manager. An assert failed when trying to install CyanogenMod for Verizon. ROM Manager downloaded CyanogenMod for the wifi tablet. I flashed that instead and it worked but there was no sound. I figured if one wifi ROM works, another will probably work, so I flash CleanRom 2.0. Big mistake. It wiped out CWM recovery and the device gets stuck on the Samsung splash screen. I made backups but did not transfer them off of my phone (another mistake).
I can get into download mode and fastboot. Download mode is useless for me because Heimdall is not cooperating and I do not have access to a Windows machine. That leaves me with fastboot. Could anyone point me to a backup that I can use to restore my SCH-i905 to Android 3.2 with fastboot? (FWIW, the threads I have read tend to have broken links.)
EDIT: SCH-i905 (Verizon LTE). The title can not be changed.
I found a tar file containing the EG01 firmware here [To prevent spam on the XDA forums, ALL new users prevented from posting outside links in their messages. After approximately 10 posts, you will be able to post outside links. Thank you for understanding!].
After flashing with fastboot and rebooting, I'm still stuck on the Samsung logo screen. This is what I did:
Code:
$ tar -tvf PDA_HC31_EG01Ba_AP352081user_CP1033580_LTE20110704_0708.tar
-rwxr-xr-x 0 0 0 4485120 Jan 1 2009 recovery.img
-rwxr-xr-x 0 0 0 327200196 Jan 1 2009 system.img
-rwxr-xr-x 0 0 0 9376048 May 2 2011 cache.img
-rwxr-xr-x 0 0 0 16 May 2 2011 fusetrigger.bin
-rwxr-xr-x 0 0 0 10747904 Jun 24 2011 lte_modem.bin
-rwxr-xr-x 0 0 0 3962240 Jul 4 2011 modem.bin
-rwxr-xr-x 0 0 0 4051200 Jul 8 2011 boot.img
$ tar -xvf PDA_HC31_EG01Ba_AP352081user_CP1033580_LTE20110704_0708.tar
x recovery.img
x system.img
x cache.img
x fusetrigger.bin
x lte_modem.bin
x modem.bin
x boot.img
$ fastboot devices
288414343FF52D7 fastboot
$ fastboot flash recovery recovery.img
sending 'recovery' (4380 KB)...
OKAY [ 0.241s]
writing 'recovery'...
OKAY [ 0.267s]
finished. total time: 0.508s
$ fastboot flash system system.img
sending 'system' (319531 KB)...
OKAY [ 17.336s]
writing 'system'...
OKAY [ 40.205s]
finished. total time: 57.541s
$ fastboot flash boot boot.img
sending 'boot' (3956 KB)...
OKAY [ 0.236s]
writing 'boot'...
OKAY [ 1.279s]
finished. total time: 1.515s
$ fastboot flash cache cache.img
sending 'cache' (9156 KB)...
OKAY [ 0.499s]
writing 'cache'...
OKAY [ 2.238s]
finished. total time: 2.737s
$ fastboot flash modem modem.bin
sending 'modem' (3869 KB)...
OKAY [ 0.212s]
writing 'modem'...
OKAY [ 0.304s]
finished. total time: 0.517s
$ fastboot flash lte_modem lte_modem.bin
sending 'lte_modem' (10496 KB)...
OKAY [ 0.576s]
writing 'lte_modem'...
FAILED (remote: (00030003))
finished. total time: 0.577s
$ fastboot flash fusetrigger fusetrigger.bin
sending 'fusetrigger' (0 KB)...
OKAY [ 0.001s]
writing 'fusetrigger'...
FAILED (remote: (00030003))
finished. total time: 0.013s
$ fastboot reboot
rebooting...
finished. total time: 0.000s
$
I'm not sure what lte_modem.bin and fusetrigger.bin are for, but there is no immediately obvious way to flash them.
[Q] Looking for a PIT File for the SCH-i905 (Verizon LTE)
Fastboot is not working, but I managed to get ODIN to work on Parallels. I've tried flashing a couple of ROMs, but both of them error out whenever they get to system.img. This appears to be partition problem. Can anyone point me to a PIT file for the SCH-i905 (Verizon LTE) tablet?
Hi,
I have Two Tablets of Yuntab One having Android v2.3.5 and Other is Having ICS_4.0.4 version.
I wish to make both the tablets on ICS_4.0.4 version.
I have been successfully extracted ICS ROM with the help romdump v82 and Terminal emulator having files System.img (156,416 KB); recovery.img (10,240 KB); & boot.img (225,280 KB).
Now i am trying to apply those ICS version extracted .img files on to Yuntab Tablet with version v2.3.5. By Applying fastboot commands and i am getting error as follows.....
fastboot flash system system.img
sending 'system' <156416 KB>...
OKAY [39.109s]
writing 'system' ...
FAILED <remote: flash write failure>
finished. total time: 67.609s
fastboot flash boot boot.img
sending 'boot' <225280 KB>...
FAILED <remote: data too large>
finished. total time: 0.016s
Could you Please suggest how to flash and what i am missing to flash these files with fastboot commands...
Device Specifications are as follows:
Hardware: QRD
Model: P701+
Build Number: WAVE-1.0.917_20120616 user
Build Data UTC: 20120616-002043
Android v: 2.3.5
Baseband v: 76XXU-UENCKOLYM-10982302
Kernel v: 2.6.38.6-perf+ ([email protected])(gcc version 4.4.3 (GCC) #1 Sat Jun 16 08:26:33 CST 2012
Uboot build v: --- should be root shell
LCD Driver IC: --- should be root shell
PLEASE ADVICE WITH FLASHING GUIDE AND IF POSSIBLE SUGGEST ANY OTHER CUSTOM ICS ROM TO BE FLASH ON THIS v2.3.5 TABLET.
Hi, Could anyone please suggest me with guides to follow further please....
sharmavishu said:
Hi,
I have Two Tablets of Yuntab One having Android v2.3.5 and Other is Having ICS_4.0.4 version.
I wish to make both the tablets on ICS_4.0.4 version.
I have been successfully extracted ICS ROM with the help romdump v82 and Terminal emulator having files System.img (156,416 KB); recovery.img (10,240 KB); & boot.img (225,280 KB).
Now i am trying to apply those ICS version extracted .img files on to Yuntab Tablet with version v2.3.5. By Applying fastboot commands and i am getting error as follows.....
fastboot flash system system.img
sending 'system' <156416 KB>...
OKAY [39.109s]
writing 'system' ...
FAILED <remote: flash write failure>
finished. total time: 67.609s
fastboot flash boot boot.img
sending 'boot' <225280 KB>...
FAILED <remote: data too large>
finished. total time: 0.016s
Could you Please suggest how to flash and what i am missing to flash these files with fastboot commands...
Device Specifications are as follows:
Hardware: QRD
Model: P701+
Build Number: WAVE-1.0.917_20120616 user
Build Data UTC: 20120616-002043
Android v: 2.3.5
Baseband v: 76XXU-UENCKOLYM-10982302
Kernel v: 2.6.38.6-perf+ ([email protected])(gcc version 4.4.3 (GCC) #1 Sat Jun 16 08:26:33 CST 2012
Uboot build v: --- should be root shell
LCD Driver IC: --- should be root shell
PLEASE ADVICE WITH FLASHING GUIDE AND IF POSSIBLE SUGGEST ANY OTHER CUSTOM ICS ROM TO BE FLASH ON THIS v2.3.5 TABLET.
Click to expand...
Click to collapse
pleas upload tab files...
My HTC phone bricked. :crying:
1. HTC Screen freeze
2. HBOOT-1.76.0007 S-ON
3. reovery menu just has only 3 options
3.1 reboot system now [Home+Back]
3.2 apply sdcard:update.zip [Alt+S]
3.3 wipe data/factory reset [Alt+W]
4. D:\tmp>fastboot getvar cid
cid: HTC__023
my try
1. try to install RUU by grep rom.zip but no RUU for HTC__23 so it returns CID error
2. cannot run adb because cannot boot to phone OS
3. I have tried
D:\tmp>fastboot boot recovery-RA-hero-v1.6.2.img
downloading 'boot.img'... OKAY [ 1.320s]
booting...
4. I have tried
D:\tmp>fastboot flash recovery recovery-RA-hero-v1.6.2.img
sending 'recovery' (3804 KB)... FAILED (remote: not allow)
finished. total time: 0.002s
5. I have tried
D:\tmp>fastboot oem rebootRUU
... OKAY [ 0.009s]
finished. total time: 0.009s
D:\tmp>fastboot flash recovery recovery-RA-hero-v1.6.2.img
sending 'recovery' (3804 KB)... OKAY [ 1.321s]
writing 'recovery'... INFOsignature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 2.235s
D:\tmp>fastboot oem writecid 11111111
... INFO[ERR] Command error !!!
OKAY [ 0.007s]
finished. total time: 0.007s
D:\tmp>fastboot -w
erasing 'userdata'... FAILED (remote: not allow)
finished. total time: 0.001s
D:\tmp>fastboot flash boot boot.img
sending 'boot' (1740 KB)... OKAY [ 0.704s]
writing 'boot'... INFOsignature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 1.123s
D:\tmp>fastboot oem device-info
... INFO[ERR] Command error !!!
OKAY [ 0.005s]
finished. total time: 0.005s
6. When I try many commands, it will return "FAILED (remote: 12 signature verify fail)"
I don't know what to do now T T
i installed all the drivers in PC and after trying commands one after another it stucks at command "fastboot flash partition gpt.bin" and showing the following error :
target reported max download size of 268435456 bytes
sending 'partition' (32 KB)...
OKAY [ 0.005s]
writing 'partition'...
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 0.142s
after that other commands also not working and getting error: FAILED (remote failure)....now I am stuck at bootloader.......how to get rid of this issue....and works my handset well....... i searched all the questions in XDA and no command helped me out.......... cold u please help me out....thank you in advance