Hi guys,
I flashed my HTC 7 Mozart 4 months ago and now I want to install ultrashot's Dynamics v2.0 on it.
There I have a question - 4 months ago I had to downgrade SPL etc. and install Custom ROM, everything what i have to do now is run 'MozartAdvencedRUU', take rom what I want and just flash? (Of course with Bootloader screen with USB title)
I know thats stupid question, but i didn't find answer on it and i'm scared of my phone a little bit (I dont want to brick it)
Sorry for my bad english
Hi ++
I think you forgot some of important things :
+ Be careful , your battery level must be more than 50% (if your phone turn off in the middle of flashing process ... (No need to continue )
+ your need a stable connection ( so use a reliable cable for this :good: )
+ just focus on this operation and close all apps and games on your PC ( I said it because some of apps and games maybe reset your computer or interrupt the process :crying
+ do this at night ( one of my personal experiences )
and
+ Believe that you can !
Goodluck !
SPIDER-7 said:
Hi ++
I think you forgot some of important things :
+ Be careful , your battery level must be more than 50% (if your phone turn off in the middle of flashing process ... (No need to continue )
+ your need a stable connection ( so use a reliable cable for this :good: )
+ just focus on this operation and close all apps and games on your PC ( I said it because some of apps and games maybe reset your computer or interrupt the process :crying
+ do this at night ( one of my personal experiences )
and
+ Believe that you can !
Goodluck !
Click to expand...
Click to collapse
I knew about battery level and connection, but thank you for reminding it
But now I have problem - when I connect mozart in bootloader by usb - it's still shows 'SERIAL' title, it doesn't change to 'USB', now I try to reinstall SDK but every time I try it shows message "Instalation Failed" and solutions for that, which don't work.
Has anybody similar problem?
Edit
Okay, Everything I had to do was install Windows Mobile Device Centre. It was pretty hard to find x64 version. I installed WP 7.8 and it works great.
Related
Hope anyone can help me - i' am still stuck - after trying and reading posts for 6 hours. i tried to flash the touch flo w6 rom on my charmer. activesync disconected during the flash proces. charmer does not start anymore - but i can get to bootloader screen.
But all roms i found and tried to flash need an activesync connection. could someone pls let me know how to flash from bootloader without active sync and where to find such a rom - if possible a w6 - if not w5 is also very very welcome!
Thanks a lot in adv!
are you using Vista ?
Good morning Urkraft!
Actually I do - but if nessecary I have ease access to a Computer running XP.
you need to use a PC running XP, then please try to flash the base ROM as Vdlock mention in his thread : http://www.tm-phonedownloads.com/fil...ileUK_Ship.exe
Reset to bootloader then connect teh USB cable to an XP machine and run teh above shipped ROM installer
Please make sure you do this before your goes flat, if you notice now it might not be even charging ...
Charmer is running again! Tks a lot Urkraft
And yes - I tried again - WM6 is running fine!
the link doesnt work is there a new one?
The link is dead... Please.... somebody help
Please update the link, it's dead and i'm in really need. Thanks in advance!
Hello,
this is my first posting in this exiting forum I just found ! Found / read already some postings, but they couldn't help me in detail.
I'v computer experience only in HW and Win SW. There is no LINUX knowledge. But I think with this great forum my Android problem(s)
can be solved.
My story: Bought PIPO U1-pro.Good build quality, brilliant display resolutuion,weak WLAN. For my first Android device it's o.k. for me.
The device run perfect for some weeks, but than could't be switched on although fully charged ! Some minutes later it was possible to
switch on ? ? ! ! Next day same situation. Made a reset, tablet worked for a while, then every app just made a restart of the tablet.
Now it's dead, can't be switched on anymore. Tried to install latest english factory SW - not possible - RKBatchtool no green "1" possible. only blue on start and red after trying to flash.
But fortunately device is found with RKandroidTool. Tool says" Found RKAndroid Loader Rock USB" . I think that's are good news
I unpacked latest PIPO firmware w windal tool and I think now I'v got all I need to flash the device, that's are :
- RK30xxLoader
- Images: boot, kernel, misc, recovery, system, update
- package-file, parameter, recover-script, update-script
Now my questions:
1. Should I erase IDB first ?
2. What are the correct adresses in RKAndroidtool ? Found different values on different RKAndroidtool_1.35 , especially for "system"
----------------------------------------------------------------------------
I made some screenshots but till now I don't know how to attach them here ? ? All Icons on below " message " don't operate for me ? ? ?
If you can anwser my questions and have other helpful hints I like to THX in advance
Now screenshots attached
Hello,
now I tried with my XP Laptop. With it it's possible to attach the screenshots, with Win 7 wasn't ?
Main question for me still is:
What are the correct adresses I should choose for the PIPO U1-pro ( 1GB RAM / 16 GB NAND )
See the scrennshots.
THX
LG L5 (E610 )
Windows 8 x64
oryginall usb cable
Hello,
When I was flashing my phone yesterday, something went wrong, and my phone isn't working very well(i guess ). So, i have had Android 4.1.2 on stock non-brand ROM. I've decided ,that i will upgrade it to CM 10 , which has nightly builds. There were no errors during instalation and after reboot i have seen my CM ROM working. BUT, i haven't got any GSM connection, and phone was saying, that "there were errors on refreshing networks list" or smth similiar. I've decided to install baseband switcher from L7 device ( i know, stupid decision .. ) in recovery . I did it, and after reboot i got stripes on my screen. I thinked, that it's bricked, but when I plugged in USB cable to my computer, android boots and , have normal desktop with all features enabld, BUT i don't have ability to go to Emergency mode or Recovery mode ( stripes, stripes everywhere ) . What shall i do, is there a small chance to restore my phone from adb in eclipse, or smth ?
rybczyns said:
LG L5 (E610 )
Windows 8 x64
oryginall usb cable
Hello,
When I was flashing my phone yesterday, something went wrong, and my phone isn't working very well(i guess ). So, i have had Android 4.1.2 on stock non-brand ROM. I've decided ,that i will upgrade it to CM 10 , which has nightly builds. There were no errors during instalation and after reboot i have seen my CM ROM working. BUT, i haven't got any GSM connection, and phone was saying, that "there were errors on refreshing networks list" or smth similiar. I've decided to install baseband switcher from L7 device ( i know, stupid decision .. ) in recovery . I did it, and after reboot i got stripes on my screen. I thinked, that it's bricked, but when I plugged in USB cable to my computer, android boots and , have normal desktop with all features enabld, BUT i don't have ability to go to Emergency mode or Recovery mode ( stripes, stripes everywhere ) . What shall i do, is there a small chance to restore my phone from adb in eclipse, or smth ?
Click to expand...
Click to collapse
My friend Eclipse is used to build android apps,in our case(Eclipse application is a plug-in that creates an extension for the extension point,to create applications in java form)... http://wiki.eclipse.org/FAQ_What_is_an_Eclipse_application?
As for the bricked phone,its not bricked if it comes on,its called a soft brick and can be fixed by reinstalling a recovery,then a rom that is compatible with your phone.
Diablo 7 is right as your phone is booting up then you are having soft brick it happens to lot of people what you have to do is just flash custom recovery through pc and look for some compatible rom and flash it via recovery
Total brick means it will not boot up it cannot be detected by USB it's boot got corrupt
Sent from my LG-P765 using xda app-developers app
Ok, thanks for your reply. The thing is, I can't go to recovery or emergency mode, so I think, that i can't use flash tool. What kind of tools, do you mean, which can help me?
EDIT:
Ok, i got it works, First I uninstalled all drivers from my OS, then installed it again from LGMobileSupportTool and using Emergency System Recovery make it works. I'm glad to have Android 4.1.2
Thanks for your replies.
How to do it?
I have the same problem. Can you give me a step-by-step method on how to do it. Thank you very much?
Hello to all community,
strange things happened here... I use a Star H920+ phone. I had some problems with Bluetooth and Wifi, so i decided to flash rom again. I downloaded the rom from needrom dot com. (As new user, i cannot post the full url yet)
I used Smart Flash Tools to do the job. Firstly i had some difficulties getting some errors. After some search, i used MtkDroidTools and i got the right sizes for memory and write them at scatter file. The procedure went well and i got a green circle at Flash Tool.
And that's it...
After that, i get the absolute Black. But... the strange thing is that the Windows detects the phone. I tried every combination to get into recovery mode, but nothing. Only black screen.
I tried Flash Tools again to flash it with the same or an older rom, but after the some seconds, the application is not responding and Windows says that the Smart Flash Tools application has stopped responding and must be closed.
MtkDroidTools doesn't recognized the phone now.
But, as i have it connected with the pc, the sound of plug and unplug a device is heared all the time. ( Maybe it is rebooting continuously )
I hope that the hoping thing is that Windows detects the phone, but i cannot do anything more...
Do you have any idea to propose me ?
Thank you very much,
Periklis
Perarg said:
Hello to all community,
strange things happened here... I use a Star H920+ phone. I had some problems with Bluetooth and Wifi, so i decided to flash rom again. I downloaded the rom from needrom dot com. (As new user, i cannot post the full url yet)
I used Smart Flash Tools to do the job. Firstly i had some difficulties getting some errors. After some search, i used MtkDroidTools and i got the right sizes for memory and write them at scatter file. The procedure went well and i got a green circle at Flash Tool.
And that's it...
After that, i get the absolute Black. But... the strange thing is that the Windows detects the phone. I tried every combination to get into recovery mode, but nothing. Only black screen.
I tried Flash Tools again to flash it with the same or an older rom, but after the some seconds, the application is not responding and Windows says that the Smart Flash Tools application has stopped responding and must be closed.
MtkDroidTools doesn't recognized the phone now.
But, as i have it connected with the pc, the sound of plug and unplug a device is heared all the time. ( Maybe it is rebooting continuously )
I hope that the hoping thing is that Windows detects the phone, but i cannot do anything more...
Do you have any idea to propose me ?
Thank you very much,
Periklis
Click to expand...
Click to collapse
I have the same problem patrida !!! Have you found out a sollution yet ?
Use SP_Flash_Tool_v3.1344.0.212
And select Firmware -> upgrade
Hey, i want to "root" my Nexus because the restrictions suck.
Im not sure if i should do this because i bricked my last phone (very old) after - i guess - 10-15 roms.
Now is rooting like installing a OS on a computer or is the Phone wasted if the usb connection breaks while installing the root Rom?
You know what i mean?
Okay i will short my question to this:
Is installing a new Rom to my Phone the same like installing Windows to my Computer?( If the the installation fails i can try again) Or will for example a failed Rom make my phone unable to use?