I wanted this ROM so i can use multi window etc. Does someone have a link of this ROM and how i need ti downlaod:
Factory reset > install zip > choose zip > reboot??
Sent from my GT-I9100
Dannyvld said:
I wanted this ROM so i can use multi window etc. Does someone have a link of this ROM and how i need ti downlaod:
Factory reset > install zip > choose zip > reboot??
Sent from my GT-I9100
Click to expand...
Click to collapse
Mate, so you want this rom to use multiwindow... but other's roms have multiwindow...just do a search.
And maybe you can PM LegendK95, asking him to build Legend rom JB 4.1.2
But, AFAIK, he bought a galaxy Note...
Cheers
I know there are more but i want almost exact the same as the leaked version.....
Sent from my GT-I9100 using xda premium
Dannyvld said:
I wanted this ROM so i can use multi window etc. Does someone have a link of this ROM and how i need ti downlaod:
Factory reset > install zip > choose zip > reboot??
Sent from my GT-I9100
Click to expand...
Click to collapse
Well, how about looking in the Simplistic Rom-thread? Quite hard to miss the downloads on the first page.
Just flash the rom in cwm, except when the developer says otherwise.
Sent from the Matrix
Related
Hi: I've been enjoying using the CyanogenMod for a couple of months now and love it. Thanks to all who created it and continue to improve it.
I simply want to upgrade to the latest stable version. Here's what I "think" I need to do. I would greatly appreciate it if someone could verify the same.
1) put zipped flash onto root of SD Card
2) Backup phone using Titanium Backup
3) Power off phone and choose "recovery" shut-down option
4) Choose zipped flash from sdcard
5) Wait for flash to complete
The other options on the reboot menu include among other things: Wipe, Mounts, Other. I've read in other post that it's a good idea to wipe dalvick-cache. Should I do so - and am I missing anything else?
If there's already a thread out there that walks one through these steps, I was unable to find it - but would appreciate being pointed to the same.
Thanks in advance for your help.
Dave
snsd said:
Hi: I've been enjoying using the CyanogenMod for a couple of months now and love it. Thanks to all who created it and continue to improve it.
I simply want to upgrade to the latest stable version. Here's what I "think" I need to do. I would greatly appreciate it if someone could verify the same.
1) put zipped flash onto root of SD Card
2) Backup phone using Titanium Backup
3) Power off phone and choose "recovery" shut-down option
4) Choose zipped flash from sdcard
5) Wait for flash to complete
The other options on the reboot menu include among other things: Wipe, Mounts, Other. I've read in other post that it's a good idea to wipe dalvick-cache. Should I do so - and am I missing anything else?
If there's already a thread out there that walks one through these steps, I was unable to find it - but would appreciate being pointed to the same.
Thanks in advance for your help.
Dave
Click to expand...
Click to collapse
Since you are just upgrading from earlier cm7 rom, you just need to wipe cache and dalvik cache, nothing else
Sent from my LG-P500 using XDA App
terratrix said:
Since you are just upgrading from earlier cm7 rom, you just need to wipe cache and dalvik cache, nothing else
Sent from my LG-P500 using XDA App
Click to expand...
Click to collapse
Wow. Thanks for the incredibly fast response. Love this forum.
Dave
please can u give the link for how to install CyanogenMod and please also tell which rom is stable as i want to use this rom
i am currently using ciaox 2.3.3
bullet_freak said:
please can u give the link for how to install cyanogenmod and please also tell which rom is stable as i want to use this rom
i am currently using ciaox 2.3.3
Click to expand...
Click to collapse
can't u just look at the development forum???
getting bit confused over there
bullet_freak said:
getting bit confused over there
Click to expand...
Click to collapse
*mega facepalm* find one that the starter of the thread who is named mik_os
Sent from my LG-P500 using XDA App
terratrix said:
Since you are just upgrading from earlier cm7 rom, you just need to wipe cache and dalvik cache, nothing else
Click to expand...
Click to collapse
Same process with app2sd (stable) installed?
If we r upgrading frm froyo or stock version then what we should we wipe??!
Sent from my LG-P500 using XDA App
virusshah1997 said:
If we r upgrading frm froyo or stock version then what we should we wipe??!
Sent from my LG-P500 using XDA App
Click to expand...
Click to collapse
Unless you are updating from a previous version of CM, you should always do a full wipe. Take backups of your sms, contacts, etc.
Means.....what we have to wipe....can u sae me....plz!
Sent from my LG-P500 using XDA App
virusshah1997 said:
Means.....what we have to wipe....can u sae me....plz!
Sent from my LG-P500 using XDA App
Click to expand...
Click to collapse
If you are goin' from froyo or other ROM you have to wipe ALL. It means Data (format system)/Cache/Dalvik Cache/BattStats . If you are goin' from earlier CM7 then wipe Cache/Dalvik cache/battstats.
Thanks dude!
Sent from my LG-P500 using XDA App
Hi!!
I'm new to this world of roms and roots, and after installing Crdroid v12.0 a week ago, the new version 13.0 has just been released.
I just wanted to update the Crdroid ROM from v12.0 to v13.0. Could anyone help me do this? How do I need to do this? What are the neccessary steps, and does it mean i will lose all the data on my phone?
Thank you!!
Just flash it over your the older version. No need to do data wipe.
Isn't there a section in the Crdroid rom thread that tells these things?
Sent from my GT-I9300 using xda premium
UrbanDrawer said:
Just flash it over your the older version. No need to do data wipe.
Isn't there a section in the Crdroid rom thread that tells these things?
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Thanks!! and yeah, I read over 100 pages but it was mostly bugs and stuff to do with the rom....couldn't find anything, and, if you don't mind me asking, how do you flash it? :/ i know im being a noob,
thanks again!!
renikum said:
How do you flash it? :/
Click to expand...
Click to collapse
You boot into Clockworkmod and choose install zip from sd-card. A directory opens, choose the rom to flash.
Now, because the rom has aroma options, you have to choose the things you want and don't want to install.
Btw there's a Thanks button.
Sent from my GT-I9300 using xda premium
UrbanDrawer said:
You boot into Clockworkmod and choose install zip from sd-card. A directory opens, choose the rom to flash.
Now, because the rom has aroma options, you have to choose the things you want and don't want to install.
Btw there's a Thanks button.
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
THANKS! hahaha (i've also thanked you the other way! )
Hi guys
I've tried installing many version of Gapps on my S3 inc. minimal version.
I clear the 3 catchs each time, but the Gapps dont appear.
I've tried on slimbean, PAC and PA roms but the same happens on each one
Its driving me crazy as this is a new phone and want to start using it
What am I doing wrong?
cramhead said:
Hi guys
I've tried installing many version of Gapps on my S3 inc. minimal version.
I clear the 3 catchs each time, but the Gapps dont appear.
I've tried on slimbean, PAC and PA roms but the same happens on each one
Its driving me crazy as this is a new phone and want to start using it
What am I doing wrong?
Click to expand...
Click to collapse
Are u sure you are using the right provided gaaps?
Whats your phone model exactly?
Sent from my GT-I9300 using xda premium
Its a GT-I9300
and for example I use http://forum.xda-developers.com/showthread.php?t=1933804 for the rom and gapps
Ver3go said:
Are u sure you are using the right provided gaaps?
Whats your phone model exactly?
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
and what is this S3 inc. minimal version you are using? is it a stock rom or a custom rom?
Sent from my GT-I9300 using xda app-developers app
cramhead said:
Its a GT-I9300
and for example I use http://forum.xda-developers.com/showthread.php?t=1933804 for the rom and gapps
Click to expand...
Click to collapse
That's an HTC Desire ROM!!!
Yeah I noticed that RASH error as well. That was just a quick google search I used for an example.
I'm not that stupid
krs360 said:
That's an HTC Desire ROM!!!
Click to expand...
Click to collapse
custom rom
just now I tried to flash
with gapps-jb-20130301-signed.zip
cleared catchs. Nothing
what rom are you currently using? based on CM? do you have CWM recovery pre-installed??
Sent from my GT-I9300 using xda app-developers app
My BB is i9300XXEMC2
I'm trying to get PACman rom to work and flashing with CMW
currently downloading cyanogenmod to see if that works
sriram231092 said:
what rom are you currently using? based on CM? do you have CWM recovery pre-installed??
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
boot into CWM recovery. wipe data, cache and dalvik cache. apply zip from sdcard. choose zip and installing..then again choose zip from sdcard and select gapps.zip. is this the procedure you are following? I do the same everytime and faced no problems till now. you ahould have the gapps.zip of the respective rom you flash prior to it.
Sent from my GT-I9300 using xda app-developers app
what recovery?
Thats exactly what I've been doing!
I've just tried cm-10.1-20130522-NIGHTLY-i9300.zip
with CM 10.1 Gapps
booted into CWR
cleared the 3 catches
installed CM10.1
install Gapps
cleared 3 catchs again
....zero Gapps
sriram231092 said:
boot into CWM recovery. wipe data, cache and dalvik cache. apply zip from sdcard. choose zip and installing..then again choose zip from sdcard and select gapps.zip. is this the procedure you are following? I do the same everytime and faced no problems till now. you ahould have the gapps.zip of the respective rom you flash prior to it.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
after flashing rom, just flash gapps and there's no need to wipe anything before or after flashing gapps. just reboot.
Sent from my GT-I9300 using xda app-developers app
I always try both....I'm that desperate now
CMW is 5.5.0.4
Just tried RC1 and install fails
going to try a nightly
sriram231092 said:
after flashing rom, just flash gapps and there's no need to wipe anything before or after flashing gapps. just reboot.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
flash the latest touch version of CWM and you should be good to go.
Sent from my GT-I9300 using xda app-developers app
Thanks. I'm booting into cwr and installing cwm-touch-6.0.3.1-d2tmo.zip
I then go to advance and reboot recovery but im still on 5.5
sorry for the n00b like manor
that is a .tar file buddy. You can't flash it thriugh recovery. you have to put your mobile into download mode , connect to pc via uab. start desktop odin, select pda and then CWMtouch.tar file and hit start. then once you see the pass, it is done.
Sent from my GT-I9300 using xda app-developers app
you sure you got the recovery for the i9300?
found this
will give it a shot
Glebun said:
you sure you got the recovery for the i9300?
Click to expand...
Click to collapse
yes. flashing the wrong recovery kills the phone
Hi guys.
There is a beta of android 4.3 in Youtube.
http://youtu.be/VEdfDm_T_1M
DOWNLOAD
ADDONS
INSTALATION
1. boot to cwm recovery.
2. wipe data
3. Wipe cache Partion
4. Advanced
5. wipe dalvik cache
6. Install zip from sd card
7. select the rom
8. yes
9. Reboot
FANPAGE
IMPORTANT: THIS ROM IS NOT MINE AND I AM NOT RESPONSIBLE OF BRICKS, DEADS SD, ETC
A cordial greeting! :good:
RESERVED
Thanks...I'm going to try it
golfgtiedition30 said:
Thanks...I'm going to try it
Click to expand...
Click to collapse
you're welcome :good:
bullsh** 4.3 sources not out yet this is cm10.1, probably some virus
It installed fine. But i found alot of lag , even after patching the services.jar and flashing flyon mod. Had to restore nandroid :thumbup:
Sent from my Galaxy Ace GT-S5830 using xda app-developers app
Is the first beta, is normal that the rom works more slower than cm10.1, i hope that with next versions this roms works better :good:
I hope so too...cool share though :thumbup:
Sent from my Galaxy Ace GT-S5830 using xda app-developers app
And whats the different between android 4.2 and this android 4.3? Didnt see any differences in the video.
And you said this rom isnt from you, so who made this?
Sent from my GT-S5830 using xda app-developers app
Blackbox421 said:
And whats the different between android 4.2 and this android 4.3? Didnt see any differences in the video.
And you said this rom isnt from you, so who made this?
Sent from my GT-S5830 using xda app-developers app
Click to expand...
Click to collapse
I don't know.
Is from "Mohd Shakirin" (Youtube).
But in HTCMANIA said that this rom isn't cm10.2 (4.3), is a maclaw version but Mohd Shakirin changed the version to 4.3 :good:
Bye!
2 things:
1. If you didn't make it and are just reposting it, it goes in general and not android development - thread moved.
2. Obviously fake, someone has just edited the build.prop.
Thread closed.
Goodevening!
Ma'am/Sir,
Anyone can help me fix my device "S2 I9100"..
It was already Rooted.. And it happned that I feel some hang ups so I've decided to reset factory settings.
Andafter that when I turn on my phone its stucks @ the CM loading Logo.
What happen to my phone?
Can anyone give me some instruction on how to fix this..
Hoping for your support.
Regards,
Efpraim
Go into recovery and look for mounts and storage. Go into that and format data and cache. Come out of that and go into advanced and wipe cache there too. Reboot.
If that don't work reflash the rom and gapps. If that don't work flash stock with Odin. Standard stuff really. :thumbup:
Sent from my GT-I9300 using xda premium
andrewwright said:
Go into recovery and look for mounts and storage. Go into that and format data and cache. Come out of that and go into advanced and wipe cache there too. Reboot.
If that don't work reflash the rom and gapps. If that don't work flash stock with Odin. Standard stuff really. :thumbup:
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
THANK YOU SIR!
now its continuing to boot. but sir there is another problem.
my launcher is gone. and stuck in plane black screen and i can't access my SETTINGS.. T_T
ebanayo said:
THANK YOU SIR!
now its continuing to boot. but sir there is another problem.
my launcher is gone. and stuck in plane black screen and i can't access my SETTINGS.. T_T
Click to expand...
Click to collapse
Reflash rom and gapps mate. If it still does it grab another rom and flash that. Also make sure the gapps you're flashing is for the os you're using :thumbup:
Sent from my GT-I9300 using xda premium
Goodevening!
Sir,
Can I request instruction on how to reflash the rom and gapps?
Im think my phone runng os is jelly bean.
Thanks in advance!
ebanayo said:
Goodevening!
Sir,
Can I request instruction on how to reflash the rom and gapps?
Im think my phone runng os is jelly bean.
Thanks in advance!
Click to expand...
Click to collapse
Was or are you on cm rom?
Sent from my GT-I9300 using xda premium
Goodnews Sir,.. Ive found my eay fixin my phone.. Hehe.
Yes sir,..im running in cynogenmod 10.1.2 nightie..
Its just happend that the rom and gapps is already in my internal memory and get into recovery mode wipe out the date/factory reset and install the rom and gapps.. Reboot.. Hehe thank you very BIG! ^_^
ebanayo said:
Goodnews Sir,.. Ive found my eay fixin my phone.. Hehe.
Yes sir,..im running in cynogenmod 10.1.2 nightie..
Its just happend that the rom and gapps is already in my internal memory and get into recovery mode wipe out the date/factory reset and install the rom and gapps.. Reboot.. Hehe thank you very BIG! ^_^
Click to expand...
Click to collapse
Glad you sorted it if you have any more problems just post on this thread and I'll get back to you:thumbup:
Sent from my GT-I9300 using xda premium
Sir.., stk was missing in my phone. And add'l other network is not working on my phone. T_T
ebanayo said:
Sir.., stk was missing in my phone. And add'l other network is not working on my phone. T_T
Click to expand...
Click to collapse
Pls stop calling me sir. :thumbup:
Check Imei and see if it's the same as on the back of the phone. Don't post a ss of you're Imei.
Sent from my GT-I9300 using xda premium
It has the same imei..
Download a rom for you're model of phone and flash that. Make sure the gapps match. Or return to stock with Odin.
Sent from my GT-I9300 using xda premium
Could you give me some advice what rom should i replace?
Im running gapps-jb-20130301-signed.zip
Thanks!
Have a look over here perhaps:
http ://galaxys2root.com/category/galaxy-s2-roms/
If you are very uncertain or very new to placing Roms, checkout the reviews before installing.
I'd like the wizzkat rom but I cant find the file.zip >_<
ebanayo said:
I'd like the wizzkat rom but I cant find the file.zip >_<
Click to expand...
Click to collapse
Whizzkat is a little unstable, after booting it hangs.
You can find the zip here for the INTL Samsung Galaxy S2 (Being the GT-I9100): http: //d-h.st/rUc WizzedKAT_v1.2.zip - 370.36 MB
Make sure you have the newest CWM or comparable (6.0.4.5 or higher)
Make sure you know what you are doing
Hmm.. Okay thanks for the info.
How about the SIV Series v2.05-1.ZIP?
By the way what is CWM?
Im running in CWM 6.0.3.2 >.< how can I up grade it to .4.5?
ebanayo said:
Im running in CWM 6.0.3.2 >.< how can I up grade it to .4.5?
Click to expand...
Click to collapse
Did you try to google your solution already? Try this:#q=upgrade+cwm+recovery