Related
Hello, sorry if this has already been answered but I did look around at similar scenarios and it seems to me that using odin to flash the stock kernel should fix it but on my device, however, it doesn't fix my problem. I beleive what I did was select update firmware from .zip in clockwork on accident. Idk if this is what you consider a "boot loop" because it doesnt restart it just sits there at the black galaxy s2 screen. Any insight would be great. I hate to have to buy a new one as it is quite alot of money. Like I said, sorry if this is already answered but after looking around for hours I still hve had no luck. Thanks in advance, Alex
Can you get into recovery (volume up+home+power) or download mode (volume down+home+power)?
I can get in to download and recovery mode both
The outlook is promising then. Without knowing what you've flashed, it's impossible to say what damage you've done, but if you don't mind losing your data, you can certainly get back to a working state by following [READ THIS] Got a Boot Loop? Don't post a New Thread!.
Before going down that route though, if you do want to keep your data, let us know what you flashed as it might be recoverable (maybe you just flashed the wrong kernel).
I can't say for sure what i flashed but I can say that i either flashed with an update or updated with a kernel??? sound right??? idk. the data isnt near as important to me as the 680 dollars my carrier will charge me for a new s2. Right now im using a junk alcatel tribe and im going through galaxy withdrawls.
Well before flashing anything else, make sure you definitely have an I9100, not some other variant (I notice you mentioned dollars). If you have a different model, you're in the wrong forums and might make things worse by following advice for the I9100.
I was pretty sure that it is the I9100 but i took the battery out and double checked. it IS the I9100
also for what it's worth when going into recovery(stock version) right after the text reading updating application it gives me an error in red. (E:install_application_for_customer:Can't unmount /preload copy application failed) and after the (Appling [yes it really spells it appling] Multi-CSC) it says Can't access to '/system/csc/TTT/system/'. However, the line after it says that it says Successfully applied multi-CSC
My first attempt to get back to a working phone without losing data would be to flash a stock kernel then, have you tried that?
Ok.. done.. but it still sits at the galaxy screen except now it has the triange due to the custom firmware
If that hasn't got you up and running then it's probably time to bite the bullet and follow the instructions from the boot loop thread linked above (which will also remove the triangle).
Maybe you can answer another question for me. When in recovery mode it says apply update from sdcard... why does it say that when it doesnt actually read from the sdcard? i have checked with the sdcard both in and out and the file directory in the recovery mode doesnt change. is it calling the usb storage an sd card?
ok when flashing a stock rom do i use the phone option in odin or the pda still
If you're flashing a stock rom from [ROM+Guide]Official i9100 Firmwares KG, KH1/2/3/4, KI1/2/3/4/8, KJ1/2 Download, then just follow the instructions from there (but usually PDA).
:'( Still wont boot.
What does happen, did any steps fail, any error messages?
Everything went smooth with no errors. No steps failed. Sitting at the boot screen is all it does though
Did you definitely wipe user data? (step 3). The final step of that thread is to try flashing a ROM which wipes, such as (non-stock) VillainROM 1.1.
well... yes i definitely wiped the user data and it was successfull when doing so. I didnt try the villian rom just because I thought that it was an optional thing but i will def. try it now that you bring it up. and hey, i really appreciate the help no matter what the outcome
(VillainROM 1.1 - XWKE7 base) I'm a UHKG7..... is this going to be a problem? just something i noticed and thought I would ask before going ahead
So, after owning my Transformer Prime for about a month now, I decided to take the plunge and root it. I followed the instructions for ViperMod and had it rooted in no time. I then followed the instructions of unlocking the bootloader and finally installing OTA Rootkeeper.
I've had rooted devices in the past (Droid Incredible) and am familiar with RomManager. So I installed RomManager on the Transformer Prime. I then attempted to create a backup of my "current Rom", which is just stock ICS. RomManager prompted me to update Clockworkmod Recovery, which I did (I now have 5.8.2.0 installed). It then rebooted...acting like it was backing up my current Rom, but when I got back into RM, and clicked "Manage Backups" and there was nothing there. I tried once more with the same result, and ultimately gave up on backing up my current config.
I then downloaded Cyanogenmod 9 (nightly). I selected Google Apps and it proceeded to download. I got an error that the Google Apps portion had an error, but it seemed to work when I attempted to download it again.
I then proceeded to attempt to install the new Rom. The menu came up, asking if I wanted to wipe data and cache, wipe dalvik and backup current rom. I selected all three and hit ok.
My tablet rebooted...quickly, and did not show any signs of installing Cyanogenmod. Sure enough, I got my stock ICS...no Cyanogenmod. I tried again...same thing. I tried a third time, and RomManager hung when I tried to select Ok after the options of backing up, etc. Ultimately I got the error popup, asking if i wanted to wait/report/ok. I hit ok.
I then...very stupidly in retrospect...performed a factory reset from within the phone's settings menu (something I've later read is a big no no). This time, when my phone rebooted, it went straight into Clockworkmod Recovery, which is where I am now. Stuck. I've read a ton and tried everything but had no success.
Strangely, I can find the cyanogenmod file by navigating through "install zip from sdcard", then "choose zip from sdcard", then "clockworkmod", then "download", then "get.cm", then "get" and finally "update-cm-9-20120301-NIGHTLY-tf201-signed.zip". And it allows me to update using this file...even giving me the message "Install from sdcard complete"...but nothing happens. I'm still stuck in Clockworkmod.
If anyone has any advice, I'm begging for your help. Really hoping I didn't ruin my brand new tablet...
Thanks.
only thing rom manager is gold for on the prime at the moment is getting the latest CWM version. other than that, trying to flash a rom, reboot into recovery, or backup doesn't work in rom manager for prime. everything needs to be done through CWM itself. whether flashing a rom or making a nandroid backup. so you have to manually go into CWM and try flashing from there. did you make sure the roms were stored on internal memory to flash(I believe it can only be done on prime this way at the moment)? try a different rom as the CM9 has alot of bugs n issues at the moment. try flashing virtuous rom or a stock modified rom from developement.
also check out developement section for a thread called the Di's n Donts of unlocking and thread called how to or not unbrick your prime. answers you seek are in there.
See my unbricking thread
http://forum.xda-developers.com/showthread.php?t=1514088
Thanks so much for your help guys!
to demandarin: Unfortunately the only ROM I downloaded before everything went haywire was the nightly cyanogenmod 9 from yesterday. And as I explained, that ROM doesn't seem to be flashing for me... I've tried downloading other ROMs onto my SD card, but I can't seem to get my Prime to recognize the SD card in CWM, and I can't figure out any way to get ROMs onto my prime...now that its stuck in recovery. Do you know if I can load ROMs onto my Prime at this point?
to Diamondback: I read your unbricking thread and its given me some hope. It sounds like I'm falling into the "1a" category. I'll have to bunker down tonight and see if I can work through those instructions (I have no familiarity with ADB at this point, which is my main concern). Anyway, I very much appreciate you pointing me in the right direction.
I am curious though, is there some place I can look for clarification on what works in RomManager and what does not? None of that was made clear in the app itself, so I just assumed it was fully functional, like it was on my Dinc. Now I'm paying the price...
Thanks again.
original old thread on CWM on Prime...look through page and people state what works n what doesn't.
http://forum.xda-developers.com/showthread.php?t=1510983
new thread created today on a new updated CWM that should be used. has alot of issues that didn't mesh well with Prime and CWM fixed. seems like you might have jumped the gun a lil early. this is latest version thread. you can also get the latest version through rom manager.
http://forum.xda-developers.com/showthread.php?t=1533697
good luck!
demandarin said:
original old thread on CWM on Prime...look through page and people state what works n what doesn't.
http://forum.xda-developers.com/showthread.php?t=1510983
new thread created today on a new updated CWM that should be used. has alot of issues that didn't mesh well with Prime and CWM fixed. seems like you might have jumped the gun a lil early. this is latest version thread. you can also get the latest version through rom manager.
http://forum.xda-developers.com/showthread.php?t=1533697
good luck!
Click to expand...
Click to collapse
Thanks, but I actually do have the latest version of CWM (5.8.2.0), according to the link you provided. The thing is, I'm just very unfamiliar with CWM, or really any recovery software. The link you posted notes the following improvements:
-Possibly fixes bricks (by properly restoring boot.img)
-Correctly comes with Staging/System unmounted
-Nandroid Restores properly the boot.img (of backups created with this CWM). This means no more issues when restoring a Rom if you are coming from another from (for example, if you are restoring Virtuous after wiping cm9)
Which all sounds great, but I have no idea how to really use any of that... Does "possibly fixes bricks" apply to my situation? I've tried selecting restore and advanced restore through CWM, but in both situations it says "cannot find files", which I'm assuming are the "boot.img" being referenced. So again, it seems like I'm hosed...
I'm just really hoping that Diamondback's unbricking method works for me. Though, I'm having a hell of a time finding instructions on how to setup ADB on my PC (Windows 7). Do you know where I can find good and current instructions?
you can Google it but plenty of YouTube view on how to set up adb.
there's a thread here on it though. take a look: http://forum.xda-developers.com/showthread.php?t=1427008
demandarin said:
you can Google it but plenty of YouTube view on how to set up adb.
there's a thread here on it though. take a look: http://forum.xda-developers.com/showthread.php?t=1427008
Click to expand...
Click to collapse
Thanks again! I think I need a tutorial on how to search XDA more effectively
SUCCESS!
Well, it took some jumping through hoops, but once I got ADB set up successfully, Diamondback's instructions worked like a charm!
For anyone encountering this thread with the same issues as me, I've included links to all of the sources of data I ultimately used.
Thanks so much for everyone's help!
Installing ADB
http://forum.xda-developers.com/showthread.php?t=1427008
http://www.youtube.com/watch?v=ZY4KSrgi-rE
I had to use the PDANet method, referenced in the Youtube video
http://junefabrics.com/android/download.php
Diamondback's Instructions for Unbricking the Prime
http://forum.xda-developers.com/showthread.php?t=1514088
Perhaps I spoke too soon...
My device is no longer bricked, but now I can't access CWM, can't factory reset...can't do anything. I'm stuck with a very broken build of Cyanogenmod 9
Here's the link to my new thread:
http://forum.xda-developers.com/showthread.php?p=23349041#post23349041
Hello first time rooting this phone. Its a SGH-I777. I used the guide from galaxys2root.com/. At first it didnt work because my computer didnt recongnize my phone. I tried a different computer and it seemed successful until it rebooted. When the phone rebooted it did nothing but stay on the first screen. I still have the ability to get into Odin mode(download mode), but that is it. When i put the phone in download mode and use Odin it allows me to download the "zimage" but after rebooting it is the same exact thing. I have tried the one click root, one click factory restore. Tried restoring it on Kies. and nothing work took it to a store and the guy said he tried but it would stop in the middle of the download the only option i had with him was purchasing a new mother board for $80. Does anyone have a solution that can help me fix my phone.
Before i attempted to root it, it had OS 2.3.6 with kernal 2.6.35.7.
Go to the development section and read the stickies. There you will find stock rooted packages you can flash with Odin.
Sent from my SGH-I777 using xda premium
@jmula,
Enter recovery and perform a wipe data/factory reset. That may clear the failure to boot. If not you'll need to flash back to stock and start over.
The yellow trangle is a result of flashing a custom kernel using Odin or Heimdall, and is expected. You are not the first person having problems with the tools provided by GalaxyS2Root. In the future, I would recommend you avoid his site.
And... as suggested, read and study till you understand the basics. Then if you have questions, feel free to ask.
creepyncrawly said:
@jmula,
Enter recovery and perform a wipe data/factory reset. That may clear the failure to boot. If not you'll need to flash back to stock and start over.
The yellow trangle is a result of flashing a custom kernel using Odin or Heimdall, and is expected. You are not the first person having problems with the tools provided by GalaxyS2Root. In the future, I would recommend you avoid his site.
And... as suggested, read and study till you understand the basics. Then if you have questions, feel free to ask.
Click to expand...
Click to collapse
the only option that i have is to put the phone in download mode. when i try to download any kernel it reboots and does not go past the booting screen with the triangle.
jmula said:
the only option that i have is to put the phone in download mode. when i try to download any kernel it reboots and does not go past the booting screen with the triangle.
Click to expand...
Click to collapse
You should be able to enter recovery. Hold down all three buttons, vol+ vol- and pwr, continuously until the phone boots into recovery. It could take 10 or 15 seconds or more. If that is unsuccessful, then since you can enter download mode, you will need to flash back to stock, or stock plus root. That is not just a kernel, but the entire package. Please see the links in my sig for instructions.
The dropbox links in the download repository are temporarily suspended until probably Monday night or Tuesday as someone abused and over-downloaded. But the hotfile links still work.
creepyncrawly said:
You should be able to enter recovery. Hold down all three buttons, vol+ vol- and pwr, continuously until the phone boots into recovery. It could take 10 or 15 seconds or more. If that is unsuccessful, then since you can enter download mode, you will need to flash back to stock, or stock plus root. That is not just a kernel, but the entire package. Please see the links in my sig for instructions.
The dropbox links in the download repository are temporarily suspended until probably Monday night or Tuesday as someone abused and over-downloaded. But the hotfile links still work.
Click to expand...
Click to collapse
i Downloaded ''UCLE5 Stock ICS plus Root'' . i placed the phone in download mode started Odin and placed file in PDA. It starts but gets stuck at cache.img
jmula said:
i Downloaded ''UCLE5 Stock ICS plus Root'' . i placed the phone in download mode started Odin and placed file in PDA. It starts but gets stuck at cache.img
Click to expand...
Click to collapse
The next thing I would suggest is to try and flash the UCKH7 full stock package with bootloaders. However, as the dropbox links in the download repository are currently suspended, you will have to download it from SamFirmware. To be able to download, you will need to register for free if you havn't already. Search sgh-i777 in the upper right hand corner of the page, then download the I777UCKH7 version. Let us know if that will flash.
Ok it finally wokred after countless times of changing usb ports. I used the one click recovery. It restroed my phone to 2.3.4 i had 2.3.6. I tried to update by kies to 4.01 and it didnt work. Kies froze. The queestion is how do i safltey root the phone?
jmula said:
Ok it finally wokred after countless times of changing usb ports. I used the one click recovery. It restroed my phone to 2.3.4 i had 2.3.6. I tried to update by kies to 4.01 and it didnt work. Kies froze. The queestion is how do i safltey root the phone?
Click to expand...
Click to collapse
Flash a .tar version of a custom kernel with Odin. I always use an old siyah.tar, but that's just me. There are other methods floating around but that's the quickest and easiest for me. I think there's an old entropy dd.tar around somewhere too. But just flash it through Odin and you're good to go, assuming you flashed one for your version of android. If you just want to get into recovery to flash something this works as well.
There may be links to tar versions of the kernels in creepy's sig I don't remember offhand.
Ok since i do not want to brick my phone again where it is just stuck at the boot loop. I tried looking for ways to root and when i tried some of them my phone went back to the problem it had it the beginning. Should i just call it quits or do you guys have a guide?
jmula said:
Ok since i do not want to brick my phone again where it is just stuck at the boot loop. I tried looking for ways to root and when i tried some of them my phone went back to the problem it had it the beginning. Should i just call it quits or do you guys have a guide?
Click to expand...
Click to collapse
Give up???
I personally don't think flashing a kernel with odin is the best way to root. It increments the flash counter, for one thing, though I'm not sure how many people care about that anymore. I would suggest that you use the stock plus root package to root the phone with odin. See the links in my sig.
Guide... did someone say guide?
Feeling the pain....
creepyncrawly said:
@jmula,
Enter recovery and perform a wipe data/factory reset. That may clear the failure to boot. If not you'll need to flash back to stock and start over.
The yellow trangle is a result of flashing a custom kernel using Odin or Heimdall, and is expected. You are not the first person having problems with the tools provided by GalaxyS2Root. In the future, I would recommend you avoid his site.
And... as suggested, read and study till you understand the basics. Then if you have questions, feel free to ask.
Click to expand...
Click to collapse
First, to Creepy....you've been a great resource here and I read a lot of what you post and you got me out of the very jam being discussed here. I made the mistake of trying to root via the galaxys2root.com site (actually, I thought it was a different site...was redirected), got the i9100 screen and a boot loop...couldn't go anywhere. I came back here and found resources eventually unrooting my phone all the way back to 2.3.4, then moved to 2.3.6, then the stock android 4.0.3 which updated to 4.0.4.
But I still want to root (4.0.4 shuts itself down A LOT...more than 4.0.3) and I have a Galaxy note 10.1 with JB 4.1.2 and I LOVE IT! I feel on a mission to get rooted and try out some of the JB roms I see talked about here, but can't seem to find the best way to root. I've heard exynosabuse referenced here (no links to it though) and I don't want to use the wrong one and mess up my phone. I've been reading for weeks here and there's obviously a lot of great material, but I'm not sure which material is critical to understand, and which is "nice to know" but might not even apply, and which material isn't even right. Very frustrating.
Judi
judib said:
First, to Creepy....you've been a great resource here and I read a lot of what you post and you got me out of the very jam being discussed here. I made the mistake of trying to root via the galaxys2root.com site (actually, I thought it was a different site...was redirected), got the i9100 screen and a boot loop...couldn't go anywhere. I came back here and found resources eventually unrooting my phone all the way back to 2.3.4, then moved to 2.3.6, then the stock android 4.0.3 which updated to 4.0.4.
But I still want to root (4.0.4 shuts itself down A LOT...more than 4.0.3) and I have a Galaxy note 10.1 with JB 4.1.2 and I LOVE IT! I feel on a mission to get rooted and try out some of the JB roms I see talked about here, but can't seem to find the best way to root. I've heard exynosabuse referenced here (no links to it though) and I don't want to use the wrong one and mess up my phone. I've been reading for weeks here and there's obviously a lot of great material, but I'm not sure which material is critical to understand, and which is "nice to know" but might not even apply, and which material isn't even right. Very frustrating.
Judi
Click to expand...
Click to collapse
The ExynosAbuse application is the only practical way to root 4.0.4 without changing base. You can download it as an attachment in the OP of the developer's thread, but read through the thread first to understand its limitations and risks.
Alternatively, you could flash 4.0.3 plus root from the development forum. If you choose that route, please read the thread to understand how to install a custom kernel, which is recommended whether you plan to install a custom firmware or not. The custom kernel will contain ClockworkMod Recovery so you can flash the firmware of your choice if you wish.
There are really several routes you could choose. All of them work. Another would be to flash back to stock Gingerbread plus root. For that see my guide How to Flash Custom Binaries Without Ever Incrementing the Flash counter!! (link in sig)
Hmmmmm..
Well, I see that their are many, more experienced than me following this thread and my following comment is not meant to jump on the knowledge train here, but............... I had the same event happen as the orig poster earlier today. I had installed an app,I then rebooted and it got a bit stuck on the Galaxy SII, What I did was go into recovery ,cleared the Dalvik cache and that is all I cleared. Then I re-installed the RR Rom .rar, which I keep on my SD, over everything and rebooted, it came back as it was 4 mins before . All I did after, was do a system restore(only) using Titanium BU. So when I see all the "clear and restore this and that" I started to doubt some of the more experienced than I. My 2 cents is, that, if one does not know EXACTLY ,how to correct an issue,leave it for our more knowledgeable brothers and sisters.
If I am wrong ,please except my appology.
b0bb said:
Well, I see that their are many, more experienced than me following this thread and my following comment is not meant to jump on the knowledge train here, but............... I had the same event happen as the orig poster earlier today. I had installed an app,I then rebooted and it got a bit stuck on the Galaxy SII, What I did was go into recovery ,cleared the Dalvik cache and that is all I cleared. Then I re-installed the RR Rom .rar, which I keep on my SD, over everything and rebooted, it came back as it was 4 mins before . All I did after, was do a system restore(only) using Titanium BU. So when I see all the "clear and restore this and that" I started to doubt some of the more experienced than I. My 2 cents is, that, if one does not know EXACTLY ,how to correct an issue,leave it for our more knowledgeable brothers and sisters.
If I am wrong ,please except my appology.
Click to expand...
Click to collapse
I don't know what you're trying to get across here. Yes, restoring a backup nandroid works. Yes, you can try wiping cache and dalvik to see if it fixes an issue. Yes you can restore apps via titanium backup. All these things are indeed true.
Phalanx7621 said:
I don't know what you're trying to get across here. Yes, restoring a backup nandroid works. Yes, you can try wiping cache and dalvik to see if it fixes an issue. Yes you can restore apps via titanium backup. All these things are indeed true.
Click to expand...
Click to collapse
Well if you did not fully grasp what I was trying to get across,you seemed to get it correct with your statement.
b0bb said:
Well if you did not fully grasp what I was trying to get across,you seemed to get it correct with your statement.
Click to expand...
Click to collapse
And yet you say, "All I did after, was do a system restore(only) using Titanium BU." This may have worked for you, but this is an absolute recipe for disaster, and should not be given as a recommendation.
And further, from what you say, you did not have the "same event happen as the orig poster." Instead you "had installed an app,I then rebooted and it got a bit stuck on the Galaxy SII." This is by far not the same as trying to root with a tool from GalaxyS2Root.
creepyncrawly said:
And yet you say, "All I did after, was do a system restore(only) using Titanium BU." This may have worked for you, but this is an absolute recipe for disaster, and should not be given as a recommendation.
And further, from what you say, you did not have the "same event happen as the orig poster." Instead you "had installed an app,I then rebooted and it got a bit stuck on the Galaxy SII." This is by far not the same as trying to root with a tool from GalaxyS2Root.
Click to expand...
Click to collapse
Hey Bro, I think you think that I am challenging you, trust me I am not and I thank you for correcting me and putting me in my place, which is a bit phone techie challenged, I'll stick to building submarines. Thanks for what you do here.
b0bb said:
Hey Bro, I think you think that I am challenging you, trust me I am not and I thank you for correcting me and putting me in my place, which is a bit phone techie challenged, I'll stick to building submarines. Thanks for what you do here.
Click to expand...
Click to collapse
Not at all. I want people to help others here. I want you to help other here as well. But it is important to post only accurate information. Inaccurate information can cause someone to do the wrong action. So I always correct misinformation.
Hi all
ok so i'm a bit nervous writing this expecting all manner of attack in that i may be posting something that's been posted before lol, i've been working on this phone from start to finish about 9 hours, over two days..... i've googled just about every combination of words to do with the title and everything in between but nothing seems to come close to what i actually need to do as nothing works
i have an LG Optimus 2x / p990, it had ICS on it but was far too slow to handle this, it needs something a bit less hardware intensive to run smoothly, so i went ahead an found cyanogenmod stable ...... 7.2 i installed sdk after an hour of finding out how it works i finally got adb and fastboot working, i then needed this, that, this, that, etc etc etc.....
to cut a 9 hour story short, i've managed to get myself to the point where i wiped the phone of everything but CWM partioned for ics via the AIO software but CWM will not let me install any ROM onto the phone. to be more precise it says i have installed CM 7.2 successfully! (i've tried this via the CWM via external SD card and sideload) i reboot the phone it's as if i've never done a thing, no trace or suggestion i've even attempted it on the internal card... nothing
i'm at the point now where i'm quite happy to just have my phone back now and install ICS 404 but can't use the LG kdz install software as the pc doesn't see the phone as an LG p990 because it's recovery and i can only get it to come up as internal and external memory cards
i'm not really a noob when it comes to tech stuff but this little phone has me stumped.... please, i'm begging you, help me any operating system that can get my phone working will do, preferably the CM 7.2 if not back to ICS 404?
and i know, i know i should have backed up but i had no idea it could be so complicated just to put an OS on a tiny computer
ETA i've tried that exitrecovery.zip thing and it did nothing :/
It's quite simple
Try to reset and unroot/re-lock the phone then unlock and root, then what you need to do is get ROM Manager and get the Clockwork Recovery and the version that supports your device, although you might need to hook up your phone to your computer for the process to work.
Also put back in ICS 4.0.4 when unrooted and re-locked again like stock and make sure it's the stock file for your phone.
And after you got ROM Manger and the Clockwork Recovery
Then just in Clockwork wipe out all data on the device and don't do a factory reset in Android just with clockwork and delete everything that was made on that phone then install CyanogenMod.
After that it will seem to take a long time or just a while to boot up and then it boots faster then the original ROM.
If you have Clockwork Recovery just wipe out all the data while it's still in there and you should be set.
When it was my first time putting in CyanogenMod it was 10.1 RC1 on my Nexus 7 and it didn't work and forever bootlooped, and that was because i forgot to wipe the device. Then after going into Recovery with Clockwork I deleted all the data of my tablet and it worked but took 5 mins. to boot up which is nomal.
And if Clockwork doesn't work, do the same with TWRP (Team Win Recovery Project) and download that which can be found here teamw.in/project/twrp
If you don't want to get ROM Manager or that one isn't working then try this website to get Clockwork because it has the whole list of devices and I recommend downloading from the website instead of their app. clockworkmod.com/rommanager
cheers for that, i've tried all of the above still to no avail, having a think about it the phone is partioned for ics, i'm trying to install CM 7.2 which as i understand isn't ICS so.... maybe the error is that it's a different partioning sequence/setup i'm gonna go for CM 10.1 and see if that makes a difference.
to add i'm not sure why everyone rants and raves about CWM, TWRP seems much more complete and advanced do you (or anyone else) know the main differences?
twelfty said:
cheers for that, i've tried all of the above still to no avail, having a think about it the phone is partioned for ics, i'm trying to install CM 7.2 which as i understand isn't ICS so.... maybe the error is that it's a different partioning sequence/setup i'm gonna go for CM 10.1 and see if that makes a difference.
to add i'm not sure why everyone rants and raves about CWM, TWRP seems much more complete and advanced do you (or anyone else) know the main differences?
Click to expand...
Click to collapse
TWRP has a completely touch driven interface that is 100% themeable, while CWM has a touch version and non-touch version. Also TWRP has a built in file manger and terminal emulator where as CWM does not. A lot of people like TWRP because it provides a lot of good features with a simple and straightforward yet powerful user interface. I would recommend taking a look at this guide if you want more information on the differences between the two http://www.droidiser.com/2013/04/twrp-vs-clockworkmod-recovery.html?m=1.
Sent from my SCH-I535 using xda premium
ok i managed to do it i can't remember exactly how but some good links and info for anyone who stumbles across this in need of help
i went for cyanogenmod 10.1 to make this work i used this AIO tool - http://forum.xda-developers.com/showthread.php?t=2020737
repartioned with OLD partion layout and BL
installed TWRP (included in the aio)
if you need to reinstall the google play store make sure you have right version if you flash it and get "unfortunately setup wizard has stopped" repeatedly you have the wrong version see this link for which one you need http://wiki.cyanogenmod.org/w/Gapps
obviously make sure you have adb and fastboot setup and drivers too.... it's a long process installing the entire sdk, personally for flashing this once and most definately not inclined to do it again i'd go with just the adb and fastboot rather than the whole sdk
also i found a keyboard error with 10.1 where i'd type 1,2 or 3 characters and the keyboard would minmise not sure if there's a proper fix (i found one thing where you disable the autocorrect but didn't want to do that) so i decided to download and install hackers keyboad which is based on the gingerbread keyboad and is much better and comes with full features and integrates nicely
coupled with the info above from YoyoscratchMC and you should be in the field
good luck to all i was ready to jump out my window with my phone first so i could land as hard as possible on it last night but i got there in the end lol
So I'm very new to all of the rooting stuff. I got an HTC 4G LTE off Ebay just to use as sort of like a tablet. The firmware on the phone kinda sucks so I wanted to root it and go with a better version of Android that the bloatware-inflated version HTC provides. Not to mention updates are no longer supported.
I successfully rooted the phone with TWRP and followed the instructions to wipe the phone and such. This is where the instructions I found were kinda "off" and started using way too much lingo so I decided to wing-it a bit, thinking I had sort of understood it. I went to install, installed the BeanStalk and Gapps zip folders that are available in the the other section.
Rebooted my phone and it wouldn't go past the HTC boot logo... So I tried again. No luck.
I managed to get back in TWRP and I'm wondering what I need to do in order to get this bad boy to work. I checked the troubleshooting threads and found the section on boot-looping, but so I did the cache wipes it stated, selected "Factory Restore" and it rebooted back into TWRP. I'm not really sure what to do. Do I re-install the BeanStalk and Gapps zips, or am I missing something?
Thanks for any help.
If the phone is S-on you'll have to flash the kernel separately from the ROM itself. Hit the top link in my sig and read the entire guide. I think it will be quite useful to you:thumbup: