Hi guys,
I'm having an issue with my new touch pro 2 from verizon.
I purchased the act100 TV out cable:
http://store.wmexperts.com/htc-tv-out-cable-act100/11A75A5166A.htm
I plug it in as instrucated, the touch pro 2 asks me what type of signal i want (NTSC/PAL) then brings me to a screen where i can pick Presentations etc.
However the TV displays no images, i get sound but never a picture.
I have tried this on 2 different TV's and tried both NTSC and PAL and all i ever get is a blank screen with audio.
Am i missing something or is the device faulty?
thanks
Raptor
raptor_demon said:
I have tried this on 2 different TV's and tried both NTSC and PAL and all i ever get is a blank screen with audio.
Am i missing something or is the device faulty?
Click to expand...
Click to collapse
Hi Raptor,
I have exactly this problem, and I am quite distressed, because it worked only a few days ago. Did you ever get this issue resolved? I know you listed the same issue on another forum, but I couldn't tell how you did it from the post. How did it work?
Cheers,
Joel
Sad to say i never made this work sorry.
Me too, and google around doesn't help anyway,
If it's has resolved, pls post it in here or pm me.
Thanks
Ok, some year ago i tried to make the sound work through the speakers in my car.
I opened up a soundcable and modifyed it to fool the phone that it was in video out mode.
So here's how the cables should be connected. I can post my pics of how it looks and maby someone's able to figure something out from it
Actually, it would be really easy to fool the phone that it's in Video out mode, just bend the gnd wire to the tv-detector wire, and solder them together (inside the cable that goes into your phone).
The blue and the orange pin needs to be connected to each other inside the cable housing.
Edit: To clear things out this actually works on my phone and whenever i connect the cable it swaps over to video-out mode. No problems at all.
Edit2: Nevermid, after reading through your post i noticed that you've already got the phone thinking it's in video out mode, so that's probably not the problem.
Can anyone make a request for the das bamf team? I would like the Bluetooth stack modded to have a higher bit pool rate. The sound quality when streaming music is really sub par. Ive been told its due to the BT stack having a low bit pool. CM7 or example is supposed to have addressed this.
Another request would be to have the menu where you choose what type of connection you want when you plug into a computer (mount as hard drive, charge only, etc) to come up ANYTIME you plug the usb cable into a power source. My pioneer premier stereo doesn't bring up that menu when I plug it in via usb. The phone just charges. Therefore I can't play music through usb.
In the alternative does anyone know how the phone actually knows its hooked up to a laptop and not a wall outlet? What actually causes that menu to pop up?
While I lack the knowledge to understand WHY I can't pair things like Wiimotes on my HTC phones, I would love for someone who understands the problem to work on a fix for it. I love HTC, I had the Incredible and now have the incredible2 (stock) and the TB (BAMF remix). I hate the fact that my buddies with motorola phones can dl emulators and pair up Wiimotes and go to town. As far as sound quality I have had good luck with some BT devices and bad luck with others. I have a Jabra clipper BT RX that I use in the car and it sounds as good as wired.
As for the usb menu, I think it would be great to add the connection type pop up everytime you plug anything in, as long as we could toggle that feature so i don't hve to choose everytime me TB hits a car or home charger.
speed51133 said:
Can anyone make a request for the das bamf team? I would like the Bluetooth stack modded to have a higher bit pool rate. The sound quality when streaming music is really sub par. Ive been told its due to the BT stack having a low bit pool. CM7 or example is supposed to have addressed this.
Another request would be to have the menu where you choose what type of connection you want when you plug into a computer (mount as hard drive, charge only, etc) to come up ANYTIME you plug the usb cable into a power source. My pioneer premier stereo doesn't bring up that menu when I plug it in via usb. The phone just charges. Therefore I can't play music through usb.
In the alternative does anyone know how the phone actually knows its hooked up to a laptop and not a wall outlet? What actually causes that menu to pop up?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=708685
Its an ongoing issue for many people. Looking into it, but its looking a bit bleak right now.
Thank you very much for all you do.
Any advise on the usb connection menu and how to make it come up?
any help on the following?
Another request would be to have the menu where you choose what type of connection you want when you plug into a computer (mount as hard drive, charge only, etc) to come up ANYTIME you plug the usb cable into a power source. My pioneer premier stereo doesn't bring up that menu when I plug it in via usb. The phone just charges. Therefore I can't play music through usb.
In the alternative does anyone know how the phone actually knows its hooked up to a laptop and not a wall outlet? What actually causes that menu to pop up?
Product links:
http://www.amazon.com/Samsung-Stereo-Clip-On-Bluetooth-Headset/dp/B0057WWK5E
http://www.newegg.com/Product/Product.aspx?Item=N82E16875982446
High Resolution Image Gallery (Close up of buttons, and dimensions): http://imgur.com/a/b5HyR#0
In short, at half the price of the HTC Stereo Clip, I don't see why you would buy anything else. (A simple male to male adapter and it'll plug into your head unit just the same.)
Audio Quality: It's great! The new APT-X codec(?) is awesome. It would take a double blind hearing test for me to tell the difference between the Samsung and a wire. Can you tell? Maybe, but requiring a double blind test is good enough for me in my car.
Note: I have the bluetooth feeding directly into an amplifier that feeds my speakers. I no longer have a headunit.
For me, there are so many benefits of this unit vs the Stereo Clip.
Less than half the cost ! ($30 vs $70 for HTC Clip)
I can plug ANY set of headphones into the bluetooth and have "wireless" headphones
Has a built in mic, so I can answer calls with it in the car or out
Great battery life
Comes with a nice pair of short corded ear buds that have decent sound isolation as well
A minor gripe: If you look at the photos, the buttons are really small with no tactile differentiation. I always have to look at it to figure out what side I'm going push. It would have been so easy to make one side have some tactile difference.
Nice review!!! I just received mine yesterday and I love it as well. Definitely worth 30 bucks. Agree with everything you posted!
Sent from my EVO using xda premium
Ordered mine earlier today! Looks like I made a good choice....now I got to go set up some new Tasker profiles
can you pair two devices to this thing (i.e. ELTE for me and 4S for my wife)?
I'm looking for an a2dp adapter to do a fixed install inside my car. Can I leave this hooked up to a usb power source constantly and hide the reciever in my armrest? Also is there any problem using these for a2dp only and using my car's built in hands free?
donatom3 said:
I'm looking for an a2dp adapter to do a fixed install inside my car. Can I leave this hooked up to a usb power source constantly and hide the reciever in my armrest? Also is there any problem using these for a2dp only and using my car's built in hands free?
Click to expand...
Click to collapse
I would be interested to know if it would automatically power on or stay on for a fix car install. If you just want a2dp fixed install, check out the isimple isfm21. It does hard wired fm modulation or rca line out and has an Android app to change fm frequency.
Ph33zy said:
can you pair two devices to this thing (i.e. ELTE for me and 4S for my wife)?
Click to expand...
Click to collapse
I don't see why not. In fact, it supports two simultaneous connections as well (if the devices support it).
donatom3 said:
I'm looking for an a2dp adapter to do a fixed install inside my car. Can I leave this hooked up to a usb power source constantly and hide the reciever in my armrest?
Click to expand...
Click to collapse
dmacias said:
I would be interested to know if it would automatically power on or stay on for a fix car install.
Click to expand...
Click to collapse
I have mine hooked up in a sort of fixed install. I have a USB and 3.5 mm cord running through my dash up to my sun visor where the Adapter sits, I was also going to do a totally fixed hidden install, but that would have hidden the built-in mic negating the hands free calling functionality. As long as your armrest isn't surrounded in metal (blocking the bluetooth signal), you should be fine. I briefly had it in my center console to test and it worked fine, then I realized, hey I won't be able to use the mic if I do that.
My USB is hooked up to a secondary cigarette socket I installed that is only live when the ignition is on. You definitely could leave it hooked up to a constant power source, but I don't know what that would do to the battery over time (the bluetooth battery and your car battery). I've decided to play it safe and not kill the battery. Having said that, if it's permanent, it shouldn't be an issue even if the bluetooth battery stops taking a charge. I've seen laptops that have dead batteries, but ppl are able to still use them plugged in.
It doesn't turn on and off automatically, so here it may be different from the StereoClip (I don't have a StereoClip so I don't know). It does work while hooked up to power so you could leave it on all the time as mentioned above. I turn mine off although I did forget one time and left it on, no biggie since it's connected to power. I'm going to set up a tasker profile to remind me to turn it off.
Also is there any problem using these for a2dp only and using my car's built in hands free?
Click to expand...
Click to collapse
I don't know. I do know that it supports a2dp, and it supports two simultaneous bluetooth connections if the devices support it to play music, but I'm not sure how that works with calls and whether or not it would try to play the music through your car's hands free system and whatever you have plugged.
I've never had a car built in hands free system so I don't know how that works. There's a small section in the manual about simultaneous bluetooth connections if you want to try and find the manual online.
couragedragon said:
I don't see why not. In fact, it supports two simultaneous connections as well (if the devices support it).
I have mine hooked up in a sort of fixed install. I have a USB and 3.5 mm cord running through my dash up to my sun visor where the Adapter sits, I was also going to do a totally fixed hidden install, but that would have hidden the built-in mic negating the hands free calling functionality. As long as your armrest isn't surrounded in metal (blocking the bluetooth signal), you should be fine. I briefly had it in my center console to test and it worked fine, then I realized, hey I won't be able to use the mic if I do that.
My USB is hooked up to a secondary cigarette socket I installed that is only live when the ignition is on. You definitely could leave it hooked up to a constant power source, but I don't know what that would do to the battery over time (the bluetooth battery and your car battery). I've decided to play it safe and not kill the battery. Having said that, if it's permanent, it shouldn't be an issue even if the bluetooth battery stops taking a charge. I've seen laptops that have dead batteries, but ppl are able to still use them plugged in.
It doesn't turn on and off automatically, so here it may be different from the StereoClip (I don't have a StereoClip so I don't know). It does work while hooked up to power so you could leave it on all the time as mentioned above. I turn mine off although I did forget one time and left it on, no biggie since it's connected to power. I'm going to set up a tasker profile to remind me to turn it off.
I don't know. I do know that it supports a2dp, and it supports two simultaneous bluetooth connections if the devices support it to play music, but I'm not sure how that works with calls and whether or not it would try to play the music through your car's hands free system and whatever you have plugged.
I've never had a car built in hands free system so I don't know how that works. There's a small section in the manual about simultaneous bluetooth connections if you want to try and find the manual online.
Click to expand...
Click to collapse
Sweet man.. I just bought one based on your review. Do you think you can take a picture of your setup?
I purchased one too, along with a whole host of cables to do a permanent hidden installation.
My only fear is leaving it on all of the time, only charging when I am in the vehicle. Hopefully it has a "standby" mode to conserve power when the power switch is on but nothing is connected.
OP, I won't get mine until Tuesday, is there anyway you can test a permanent always-on installation like I'm talking about by seeing how yours does leaving the power switch on for a day or so?
The tech specs list a 130hour standby battery life. Should be more then enough when the car is not moving. my delema is that I cant find any decent Y adapters to split my one usb socket in my car into 2, But that is another story.
Ph33zy said:
Sweet man.. I just bought one based on your review. Do you think you can take a picture of your setup?
Click to expand...
Click to collapse
Sure, will post some tonight
modplan said:
OP, I won't get mine until Tuesday, is there anyway you can test a permanent always-on installation like I'm talking about by seeing how yours does leaving the power switch on for a day or so?
Click to expand...
Click to collapse
Not really, I use it all the time in and out of the car everyday so I'm always charging it to make sure it's topped off. Sorry man.
I did leave it on overnight once and it was fine.
Sent from my EVO LTE w/ TapaTalk 2
texanman said:
The tech specs list a 130hour standby battery life. Should be more then enough when the car is not moving. my delema is that I cant find any decent Y adapters to split my one usb socket in my car into 2, But that is another story.
Click to expand...
Click to collapse
Right, but does standby mean power switch is off, or power switch is on but nothing connected?
I just bought this little guy to do the splitting and will install it behind my dash where I already have the wires to my dock run.
http://www.monoprice.com/products/p...=10307&cs_id=1030702&p_id=6631&seq=1&format=2
I couldn't find a simple y splitter either, that wasn't 32 feet long....
[
I just bought this little guy to do the splitting and will install it behind my dash where I already have the wires to my dock run.<br />
<br />
http://www.monoprice.com/products/p...=10307&cs_id=1030702&p_id=6631&seq=1&format=2<br />
<br />
I couldn't find a simple y splitter either, that wasn't 32 feet long....
Click to expand...
Click to collapse
My concern with that is it'll only charge your phone in USB mode which isn't enough when using navigation with the screen on.
I ended up getting a dual USB adapter that charged in AC mode and running two usb cords.
Sent from EVO LTE w/ TapaTalk 2
couragedragon said:
My concern with that is it'll only charge your phone in USB mode which isn't enough when using navigation with the screen on.
I ended up getting a dual USB adapter that charged in AC mode and running two usb cords.
Sent from EVO LTE w/ TapaTalk 2
Click to expand...
Click to collapse
If you have the car dock, it forces AC mode, as long as your charger has enough current (at least 1A).
My charger is 2.1A, the bluetooth will probably pull 500mA and the phone will pull 1A, so in my case (with the dock) the hub should work fine, and will look a lot cleaner with only one cord running from my cigarette lighter to behind my dash.
But to each their own. I'll take pics of my setup on Tuesday.
Ph33zy said:
Sweet man.. I just bought one based on your review. Do you think you can take a picture of your setup?
Click to expand...
Click to collapse
I haven't made it pretty yet. I usually run my stuff for several weeks before I shore up all the wires and hide everything behind the dash properly and make a custom plate to cover up the head unit opening and paint the L Bracket I used black.
http://imgur.com/a/igJgN#6
modplan said:
If you have the car dock, it forces AC mode, as long as your charger has enough current (at least 1A).
My charger is 2.1A, the bluetooth will probably pull 500mA and the phone will pull 1A, so in my case (with the dock) the hub should work fine, and will look a lot cleaner with only one cord running from my cigarette lighter to behind my dash.
But to each their own. I'll take pics of my setup on Tuesday.
Click to expand...
Click to collapse
You know what, at first I was like NUH UH! And then I remembered, the first dock I got didn't do that AND it eventually stopped working (charging) and I had to exchange it for another one. So it was probably faulty. Good to know. Thanks for the heads up.
What's the range on this device? Sometimes I don't have good signal in the office so I have to leave it by a window. Usually no more than 20-30 feet away. Wanted to know cause I like to stream Pandora usually all day while I walk around the office.
Sent from my EVO using Tapatalk 2 Beta-5
dwiz06 said:
What's the range on this device? Sometimes I don't have good signal in the office so I have to leave it by a window. Usually no more than 20-30 feet away. Wanted to know cause I like to stream Pandora usually all day while I walk around the office.
Sent from my EVO using Tapatalk 2 Beta-5
Click to expand...
Click to collapse
I've found that the Bluetooth signal is very dependant on a variety of factors. You'll likely be on the edge of its range though.
For example, in my house I've been 20ish feet away and it works fine, but if go in a certain corner with a bunch of appliances it gets crackly.
I've also parked directly in front of a strip mall store and gone inside easily 30 feet with no issues.
Sent from EVO LTE w/ TapaTalk 2
I'm glad to have found this seeing as how the HTC stereoclip does NOT route your phone calls, when a phone call comes in it mites the music and it will use the speaker on the phone nut your car speakers. It only routs music. Which seems incredibly dumb to me. But I suppose HTC has to sell you another blue tooth device to take phone calls.
Sent from my EVO using Tapatalk 2
Freelancerx said:
I'm glad to have found this seeing as how the HTC stereoclip does NOT route your phone calls, when a phone call comes in it mites the music and it will use the speaker on the phone nut your car speakers. It only routs music. Which seems incredibly dumb to me. But I suppose HTC has to sell you another blue tooth device to take phone calls.
Sent from my EVO using Tapatalk 2
Click to expand...
Click to collapse
Probably because they couldn't be bothered to also lower the phone stream's volume and if they had a mic on the device it would just pick up the other person's voice from the car speakers and it would be a whole bucket of echoes without active noise cancellation.
I got mine, and I have to say it sounds fantastic. I have it in my "fixed" install. basically I have it plugged into a cigarette lighter that turns off with the car, and the audio is running under my console to the backside of my radio.
With the HTC car dock, my phone connects to my factory bluetooth handsfree for phone calls, and the Samsung for music, and standard audio, such as nav.
Only problem I have is it stays on when the power is off which means my phone stays connected when I go into my house.
I am considering cutting the battery wire on the inside to solve that issue.
Hey everyone,
Has anyone noticed bluetooth issues? I've pointed them out in other threads, but they seem to be glossed over. I hate to seem like a noob by creating new threads, but I fear that the issue is being looked over by most people. I've read a few reports of people having issues with their phones connecting to their cars or headsets automatically. Has anyone else faced these issues?
I specifically cannot get my BT headset to connect unless I unpair and repair it everytime I want to use it. Sometimes even during a phone call the headset will drop connection and wont reconnect unless i turn it off and on a few times. For reference, I've tried multiple BT headsets and they all behave the same way. These headset's also work just fine with my Galaxy S2, just not with my S3 (international on XLE8)
No problems with bluetooth here and I use it a lot (HS3000, Logitech Boombox, PS3 and Wii controllers too).
No issues here. Phone sometimes doesn't pair automatically with the BT kit in my work car, but I've had that issue with my S1 and S2 in the same car so I'd say it's a problem with the headunit.
Works perfectly with the Sony headunit in my own car, and connects to my mate's fine.
ok, what firmware rev are you guys running? im going nuts not being able to use bluetooth here!!
somewhat related.
i often leave my sgs3 connected to my laptop via usb when i fall asleep. at morning, battery's charged 100% obviously and phone isn't hot.
last time around, i was listening to music via hm3700 bluetooth headset. then later turned off the bluetooth headset. i forgot to turn off the bluetooth on sgs3 and again fell asleep while it's still connected via usb to laptop.
when i woke up at morning as usual battery's charged 100% but the sgs3 was hot, not so hot but isn't anywhere the normal hot we're accustomed to.
connects automatically to my car's BT built-in system. Only needed to pair once.
Works very well with my Sennheiser PXC 310 BT.
If I switch on the headphones the phone automatically connects to it.
can everyone please detail their firmware/kernel they are using?
i am on XXALE8, with the stock kernel
I have problems on XXLE8 as well connect it to my car head unit and it acrually crashes the headunit after 5 mins being connected . After the heaf unit crashes 3 times it requires a pin code. Iphone 4, 4s and gs2 connect no issues.
Sent from my GT-I9300 using Tapatalk
bean12147 said:
I have problems on XXLE8 as well connect it to my car head unit and it acrually crashes the headunit after 5 mins being connected . After the heaf unit crashes 3 times it requires a pin code. Iphone 4, 4s and gs2 connect no issues.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
thanks for your input, i upgraded to XALF5 and still having the same issues. this is frustrating!!!!
Oddly - my phone will automatically connect to my cars in-built BT system, but it won't auto connect to my Jawbone Era without switching BT of and back on....
I also have problems, with my build-in bt in my car. Have XXBLH3. Connect fine, but drop the connection 2-3min after. My SGSII have no problems
No Ringtone through Bluetooth
Okay here is my problem……I want my custom ringtones i have set for contact to play in my Bluetooth headset when a receive a call, not that dumb ring. That way I will know if I want to take the call or not because I can tell by the ringtone who is calling. Why would Samsung disable this feature. my iPhone 4s plays the ringtone I have setup when I get a call. Is there anyway to do this. I ride a motorcycle and I have a device called a Chatterbox that let’s me connect via Bluetooth to my phone so I can hear my music and talk and make calls while I am riding. On my iPhone 4s my music would pause my custom ringtone would play and I could decide it I wanted to take the call or send it to voicemail, then my music would start right back up from where it left off. Right now my Galaxy i717 and my Galaxy i747 (Note and S III) just play this annoying ring and I can’t tell who it is! Any have a fix or work around for this.
Hmmm, the sound on my cars bluetooth gets distorted and only a reconnect will fix, and more worringly sometimes the S3 will not wake up after disconnecting from my car and only a hard reset will solve it.
My S2 did pretty much the same thing.