Hi, I have a galaxy Gascinate to metro pcs, which is already in the talk and text, but I am trying to get the internet and mms working but when I get to inputting the spc code, default 000000, it says wrong code.
Any help would be appreciated!
A quick interweb search brought up this number for the fascinate
2010031619780721
.
Sent from my SCH-I500 using xda premium
hhp_211 said:
A quick interweb search brought up this number for the fascinate
2010031619780721
.
Sent from my SCH-I500 using xda premium
Click to expand...
Click to collapse
Yes thanks! I googled it, now I do have another problem, the internet works for a few minutes and then it goes off, I check the setting in the phone and they have been reset to the verizon settings
Related
Hello everyone,
Last night we updated an s2 to the original ics, using the ota.all went well during the presidure, but later we found out that it can't receive calls, or make any calls, and it cannot register to the network.The Sim is greek, and the phone was never flashed with room in the past, everything was original from Samsung.
Amy ideas?
But it does ask for pin code and reads the sim card?
Sent from my GT-I9100 using xda app-developers app
No pin, doesn't ask for it.nor locs the screen.
I looked in apn and there is nothing there.
So it doesn't recognize sim card?
Sent from my GT-I9100 using xda app-developers app
I guess not.
But we have replaced it with a brand new card,same number and network.
And is the new card working?
Sent from my GT-I9100 using xda app-developers app
Have you tried to input a new APN? You can get the specific APN for your carrier with an internet search or a phone call to your carrier.
The new is not working either.i tried the apns ,i have the same carrier.But it is not able to save them.
The phone is working fine when i put my own sim in it.
Go to about phone and see if your imei is empty. If it is empty then your efs got corrupt and I guess ypu don't have backup of it. If you do have a backup then restore it. Otherwise I hope you still have warranty left as your going to need it.
Sent from my GT-I9100 using xda app-developers app
Imei is there,checked it with both cards
So, after searching alot,i have found out, that if i disable pin it all works fine.But the screen doesn't lock, and i can't use pin.As soon as i enable pin again then no more calls.
Any ideas?
Search for keystr.
oinkylicious said:
Search for keystr.
Click to expand...
Click to collapse
What do you mean by that?
Still haven't found a way around it.The phone doesn't register in cell network when the pin is enabled and lock screen, or pattern do not work no matter what i do.
How about new modem?
Sent from my GT-I9100 using xda app-developers app
oinkylicious said:
Search for keystr.
Click to expand...
Click to collapse
tackygr said:
What do you mean by that?
Click to expand...
Click to collapse
I thought it would be obvious, I guess not.
maybe this will help
I need help on fixing this including many and still no results. My 3g keeps cutting on and off as soon as I go and try to browse anything. It's really getting irratating since I use my internet a lot. QPST settings are all done correctly.
Sent from my PG86100 using xda premium
xxdababyonexx said:
I need help on fixing this including many and still no results. My 3g keeps cutting on and off as soon as I go and try to browse anything. It's really getting irratating since I use my internet a lot. QPST settings are all done correctly.
Sent from my PG86100 using xda premium
Click to expand...
Click to collapse
Try change password for AN tab.. meid hex or SN.
Sent from my PG86100
cupliz said:
Try change password for AN tab.. meid hex or SN.
Sent from my PG86100
Click to expand...
Click to collapse
i would say if your on gingerbread type this ##debug# and go to evdo or 3g engineering. goto the bottom of page and see if your authenticated. it sounds like you are not. if so verify your AAA and HA keys are correct in your MIP profile. and does cricket run on verizon or sprint network. if verizon you need to put a modified sprint/verizon prl on it so the phone dosent think its roaming.
Hey guys I just bought a Samsung galaxy s 2 skyrocket. I popped in my sum card updated my apn settings and things are working good, except for visual voicemail. I was wondering if there is a way to get this working. Also instead of it saying at&t for the carrier name, it says home. Any way to change that?
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
hossinator96 said:
Hey guys I just bought a Samsung galaxy s 2 skyrocket. I popped in my sum card updated my apn settings and things are working good, except for visual voicemail. I was wondering if there is a way to get this working. Also instead of it saying at&t for the carrier name, it says home. Any way to change that?
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
You're better off asking in the Skyrocket forums. This is the I9100 forums; a different device.
Thank you I apologize
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Ok I have searched xda and tried a few different ways to get my msl code.. As yesterday I used the app "msl reader" and it said my device is not recognized but it still gave me a msl code. So my dumb ace used it and now my data is all messed up and I gotta toggle air plane mode every ten seconds. I am running the new sense 5 4.3. I am trying the logcat way now and I can't find it in there, I have tried using Terminal Emulator and that didn't work. Does anyone have any other way to find it Since Sprint won't give it to me... Thanks
uh.. you just said msl reader gave you the msl.
what are you looking to get then?
Sent from my EVO using Tapatalk
hondafreak513 said:
Ok I have searched xda and tried a few different ways to get my msl code.. As yesterday I used the app "msl reader" and it said my device is not recognized but it still gave me a msl code. So my dumb ace used it and now my data is all messed up and I gotta toggle air plane mode every ten seconds. I am running the new sense 5 4.3. I am trying the logcat way now and I can't find it in there, I have tried using Terminal Emulator and that didn't work. Does anyone have any other way to find it Since Sprint won't give it to me... Thanks
Click to expand...
Click to collapse
I followed that data "fix" using ##3something with the part that requires the msl code and had the same result. It wasn't the msl code you used. If you used a bad code it wouldn't have let you do anything. Its more like a password.
If you followed this procedure http://forum.xda-developers.com/showthread.php?p=50336502 then repeat just the first half with ##72786# and stop after updating prl and profile. Don't do the ##3 something part. Data still isn't perfect but it got better after I did that.
Sent from my EVO using xda premium
Well it's been working better now that I did the data fix earlier.. thanks everyone
Sent from my EVO using Tapatalk
For future reference sprint will give it to you. All you have to tell them is that you want to manually program your device. I got mine for my s3 less than a week ago...
Sent from my Nexus 7 2013 using Tapatalk
I have been trying to find a way on how to update my prl on my flashed note 3 but keep only coming to the "How to flash a note 3 to metro pcs or cricket". I just want to know how to do it for note 3 flashed to metro pcs.
Thank you
Hi there,
I'm sorry but I can't find anything relevant to your question/device.
Please wait until mods will move this thread to the device specific forum for more relevant answers.
Stand by
PRL helper will update your PRL, from a file you've found and down loaded to you phone.
Thank you for the help, i just download 3037 prl but I see now change in speeds. It stay at 0.02 mbps. Do you know how I could fix this? When I first had my phone flashed to metro I would get 1.2mbps. Any advise?
Sent from my SM-N900P using XDA Free mobile app
There are some old ones here.
Looks like *228 get the latest?
http://www.howardforums.com/showthread.php/1570839-Latest-Metro-Evdo-Prl
I have tried doing the *228 but it says failed to download. Do you know if there is any way to fix it?
Sent from my SM-N900P using XDA Free mobile app
Also is how can I change the SPC #. I can't find it on my phone.
Sent from my SM-N900P using XDA Free mobile app
Titan_evo said:
Also is how can I change the SPC #. I can't find it on my phone.
Sent from my SM-N900P using XDA Free mobile app
Click to expand...
Click to collapse
http://www.meidconverter.com/
They also provide the MetroPCS SPC number?
It sounds like changing it aint really legal. If you google change you imei number you can see how it's done.