phone face down - Verizon Samsung Galaxy Note II

Is there a setting where when you set your phone face down everything goes to vibrate or silent?
If so where? Thanks

Not sure if this is what you are looking for but there is a feature under settings that will mute incoming calls and mute whatever is playing when you turn the phone face down.
Settings:Motion:Turn over mute pause near the bottom.
Sent from my SCH-I605 using xda premium

sports96 said:
Is there a setting where when you set your phone face down everything goes to vibrate or silent?
If so where? Thanks
Click to expand...
Click to collapse
I don't know of a way to do it with the stock software, but I have a similar profile I made with Tasker. I set it up to turn data off and multiple other features when it's between certain hours and the phone is turned face down. You could very easily make a profile that put your phone on vibrate or silent when placed face down. I even made a profile to turn on the flash when turned upside down. Tasker is probably the coolest Android app you can own
Oh, another thing you would probably be interested in is it's cell near feature. You can use it to detect your general location and then have Tasker set the phone to vibrate or silent... or about 200+ other things. I have it set up to detect when I'm home and since it based off of cell towers it uses very little battery power.

bodieism said:
I don't know of a way to do it with the stock software, but I have a similar profile I made with Tasker. I set it up to turn data off and multiple other features when it's between certain hours and the phone is turned face down. You could very easily make a profile that put your phone on vibrate or silent when placed face down. I even made a profile to turn on the flash when turned upside down. Tasker is probably the coolest Android app you can own
Oh, another thing you would probably be interested in is it's cell near feature. You can use it to detect your general location and then have Tasker set the phone to vibrate or silent... or about 200+ other things. I have it set up to detect when I'm home and since it based off of cell towers it uses very little battery power.
Click to expand...
Click to collapse
Tasker is nuts and I wish I was better with it

Related

TP will wake up from standby by itself

When my phone is in the holster, or when charging, it automatically comes out of standby mode every so often. I don't know why it keeps doing that, but it has done it so much that I had to turn on the Lock feature on so the buttons don't get accidently pushed when in my holster etc (very annoying). I spoke to a friend who said it might be a program running in the background that keeps making the phone come out of standby because it doesn't happen to his TP. But the running programs list only has Text, and Calendar always open so I doubt its those that's causing.
Any ideas on how to solve this really annoying issue? And does anyone else experience this?
Note: My carrier is Sprint and I have no custom ROM's)
G00gle26 said:
When my phone is in the holster, or when charging, it automatically comes out of standby mode every so often. I don't know why it keeps doing that, but it has done it so much that I had to turn on the Lock feature on so the buttons don't get accidently pushed when in my holster etc (very annoying). I spoke to a friend who said it might be a program running in the background that keeps making the phone come out of standby because it doesn't happen to his TP. But the running programs list only has Text, and Calendar always open so I doubt its those that's causing.
Any ideas on how to solve this really annoying issue? And does anyone else experience this?
Note: My carrier is Sprint and I have no custom ROM's)
Click to expand...
Click to collapse
You will find that the Lock feature isn't really going to be any help either because the sliding of the keyboard will a) Wake the phone up and b) Unlock it as well if it slides more.
You can make this registry edit to make it so the slide doesn't wake up the phone. Now, when you get a text message or email (I think) the phone will wake up but as long as you don't slide it more than about half an inch, the phone won't unlock.
You should be using the lock feature on your phone anyway. If you haven't figured it out yet, you can make the "Long End key press" lock the phone. It works very well to make locking the phone quick and easy. Then you can either use the push button method to unlock OR side the phone open to unlock.
mrrogers1 said:
You will find that the Lock feature isn't really going to be any help either because the sliding of the keyboard will a) Wake the phone up and b) Unlock it as well if it slides more.
You can make this registry edit to make it so the slide doesn't wake up the phone. Now, when you get a text message or email (I think) the phone will wake up but as long as you don't slide it more than about half an inch, the phone won't unlock.
You should be using the lock feature on your phone anyway. If you haven't figured it out yet, you can make the "Long End key press" lock the phone. It works very well to make locking the phone quick and easy. Then you can either use the push button method to unlock OR side the phone open to unlock.
Click to expand...
Click to collapse
I guess I didn't phrase it right...I mean when the phone is just sitting there and the keyboard is not opening at all because it is sitting on a desk charging, no text or e-mail message go in or out, bluetooth not connected, and no alarms, or events pop up the phone comes out of standby...same scenario in my belt holster.
True I should be using the lock feature but I like to set the timer to 5 or 10 minutes but sometimes it comes out of standby before then.
G00gle26 said:
I guess I didn't phrase it right...I mean when the phone is just sitting there and the keyboard is not opening at all because it is sitting on a desk charging, no text or e-mail message go in or out, bluetooth not connected, and no alarms, or events pop up the phone comes out of standby...same scenario in my belt holster.
True I should be using the lock feature but I like to set the timer to 5 or 10 minutes but sometimes it comes out of standby before then.
Click to expand...
Click to collapse
Interesting... You are really burning up your battery (if not plugged in) letting it not go into standby for 5-10 minutes but I wonder if it some other data transmission. What is your email interval set at? Even if no emails are received, it's still sending a data "pulse" to the server.
I have te same issue (Alltel Touch Pro)
I leave the phone on the charger overnite, and sitting by itself,
even with Lock on, it will wake up, stay up the timeout period,
then go back to sleep. Like it has Sleep Apnea?
I do email by webmail so that's not an issue.
mrrogers1 said:
Interesting... You are really burning up your battery (if not plugged in) letting it not go into standby for 5-10 minutes but I wonder if it some other data transmission. What is your email interval set at? Even if no emails are received, it's still sending a data "pulse" to the server.
Click to expand...
Click to collapse
fuzzynco said:
I leave the phone on the charger overnite, and sitting by itself, even with Lock on, it will wake up, stay up the timeout period, then go back to sleep. Like it has sleep apnea?
Click to expand...
Click to collapse
mrrogers: What I meant was I like the Lock on feature to come on after 5-10 minutes...it is already in standby mode, but the lock feature is not activated until 5-10 minutes (look inside your lock settings and you will see what I mean) so I am not draining the battery.....e-mail interval is set at 4 hours so it can't be that. Even if it was that, the screen should not wake up just for sending data in or out.
fuzzynco: YES I have the same problem...its as if the phone does not want to sleep. It stays up for the timeout period then goes back to sleep then turns on again a few minutes later for no apparent reason...but for me it also comes out of standby even when not being charged.
I suppose mine might do it too then, I guess I never notice because I plug in to charge and go to sleep. :-D
I am going to test this out tonight and see what my phone does. I am running a custom Rom so who knows what might happen. I thin something that also could mask the fact that this is happening to me is that my backlight and power setting are 30sec and 1min.
If I'm not doing something on my phone, it is locked. Unlocking is so simple I don't bother with timing the locking event. I think you must use the actual "Password" protection right? I do not use that feature but I know the settings you are referring to. I have only been referring to the device lock.
mrrogers1 said:
I suppose mine might do it too then, I guess I never notice because I plug in to charge and go to sleep. :-D
I am going to test this out tonight and see what my phone does. I am running a custom Rom so who knows what might happen. I thin something that also could mask the fact that this is happening to me is that my backlight and power setting are 30sec and 1min.
If I'm not doing something on my phone, it is locked. Unlocking is so simple I don't bother with timing the locking event. I think you must use the actual "Password" protection right? I do not use that feature but I know the settings you are referring to. I have only been referring to the device lock.
Click to expand...
Click to collapse
My backlight and power settings are the same as yours.
I didn't understand your last paragraph. All I have enabled is my "lock" feature in the settings. The system lock with password is enabled after 5 minutes, but that doesnt mean it takes 5 minutes to go into standby mode. Standby mode is seperate, and it only takes 30 sec to go to standby. But after 5 minutes of standby, the "lock" feature with password is enabled.
My problem is that before that 5 minute mark, the screen comes out of standby for no apparent reason.
I'll chime in here. Verizon Touch Pro. Haven't really done much to it, but a few advanced config settings. Mine will wake up in the holster, and even when it's just sitting there on the desk charging. I only let the screen stay on for a short time, so I haven't seen my battery suffer, but this happens enough to be annoying.
stanton said:
I'll chime in here. Verizon Touch Pro. Haven't really done much to it, but a few advanced config settings. Mine will wake up in the holster, and even when it's just sitting there on the desk charging. I only let the screen stay on for a short time, so I haven't seen my battery suffer, but this happens enough to be annoying.
Click to expand...
Click to collapse
exactly stanton! same thing with me...My screen is only set for a short time so I haven't seen battery loss but very annoying. Any theories out there?
Mine does it as well Sprint TP
I think all Windows mobile phones pretty much do this.
No idea why, but there's really nothing you can do about it.
I have been testing this evening and I can't get my phone to do it. I've been testing on battery power and will try plugged in tomorrow during the day.
Are you guys using TF3D? I'm not so I wonder if it might be something tied in there? Weather? Maybe some crazy update in the music tab?
Wish I could have helped... I'll check in tomorrow and report what I find on external power.
Long time lurker, here...
I seem to remember a similar issue with the XV6600 (Blue Angel) that was traced back to some settings having to do with the syncing with Exchange servers. My memory is kind of fuzzy on the issue, but that could be a place to start to look?
I've had my Vz TP for about a week now and have not had that issue.
Check Pocket Express. By default, it's set to update itself every 4 hours (at least on the Sprint TP).
My TP was doing the same thing (ie: coming out of Sleep on it's own). That, and the Data Connection wouldn't stay turned off. I don't like my computers and phones doing anything without my expressed permission so this was driving me nuts. Since I found the Pocket Express setting and set it to manual, my phone doesn't misbehave anymore.
Another setting you might want to look at is the QuickGPS settings. It will automatically try to update itself too. I changed mine to "Remind me when data expires" and "Auto download when connected to PC via ActiveSync" and that works best for me.
Basically, you have to go through every one of your apps and check their configurations. The two I mentioned above are definite sources of your problem but there could be others.
Pete
I havent had my VZW tp do that yet. But i see its doing it on all 3 CDMA companies. I wonder if its a glitch in the hardware or the data settings that makes it do that. I dont run any email through my phone. I wonder if the email is the cause of its insomnia.
I have the same issue whether on a stock or Custom ROM.
Not sure about effects on battery. Never really gaged it. I always get 24 to 36 hours before I have to recharge.
Its not a program in the background. I just created a clean ROM with nothing in it and it still does it.
deviantirish said:
I havent had my VZW tp do that yet. But i see its doing it on all 3 CDMA companies. I wonder if its a glitch in the hardware or the data settings that makes it do that. I dont run any email through my phone. I wonder if the email is the cause of its insomnia.
Click to expand...
Click to collapse
Im pretty sure its the HTC APM 1.5 drivers.
Any other thoughts?
I didnt see any problems with the TP waking up on any of the GSM versions.
I am curious as what would be different that would cause this.
My sprint pro also does this.
Ill have it in my hand and the screen will just turn on. Not sure why.

Few Questions regarding the SGS2

Hello everyone, I have a few questions / issues regarding this phone and android in general, here it goes:
Voice Talk: what are the differences between the two apps (the one with the green and the one with the blue background colors)? They seem to do the same things to me.
Energy saving: the energy saving implementation doesn't seem too "smart" to me. I'm cool with setting reduced energy configurations like lower brightness and turning off bluetooth etc when the battery treshold kicks in, but I'd expect it to restore my setup once the battery level goes above the treshold again. Atm I have to manually undo all the changes that the battery saving functionality does, basically once a day. Isn't there a "smarter" app that restores my settings before the energy saving mode kicks in?
The battery: I've streamed 30 min of music from the device to my car's bluetooth stereo, and it removed 26% of the battery charge. I'm on fw KE2 cause it seems that KE7 is even worse when it comes to power consumption. Still, isn't it too much?
Volume: I've turned it all the way up both with the side button and inside settings -> sounds (all 4 of them). Still, if someone in my office is talking I miss a sms reception etc. It never happened to me when I had the 5800 express music, so I'm not deaf
App notifications: I left my phone near my bed, there is at least 3 out of 4 bars of 3G signal, facebook is set on 30 min updates, accuweather on 3 hours, info-costs every hour, the phone never turned off nor lost the 3g coverage, yet it missed completely or partially a LOT of updates
App settings: app settings also seem a bit random. I have an app called noLed to show led notifications on the screen when it's locked. I had enabled it, checked the "start noled after phone reboot" and all, and even if the phone never even rebooted, after a day or two I went it and the first checkbox (activate NoLed) was misteriously turned off...
Thanks everyone,
TD
tylerdurden83 said:
Hello
What are the differences between Maps,
Maps are MAPPING Latitude Is a precise location for locating friends in the nearby location and Navigator? Voice guided navigation walking driving ..
jje
Click to expand...
Click to collapse
JJEgan said:
tylerdurden83 said:
Hello
What are the differences between Maps,
Maps are MAPPING Latitude Is a precise location for locating friends in the nearby location and Navigator? Voice guided navigation walking driving ..
jje
Click to expand...
Click to collapse
Not that I'm not following your logic, it just seems kinda silly to have 3 apps for doing something that 1 app would be enough to do. For example, it's like having Street View as another external application, even thought it's just clearly a Maps "add-on".
Click to expand...
Click to collapse
Yes true but a lot of users are incapable of using stuff that requires effort and need big shiny widgets and hand holding .
jje
mini bump!
Some GS2 issues / questions
Hello everyone, I have a few questions / issues regarding this phone and android in general, here it goes:
Voice Talk: what are the differences between the two apps (the one with the green and the one with the blue background colors)? They seem to do the same things to me.
Energy saving: the energy saving implementation doesn't seem too "smart" to me. I'm cool with setting reduced energy configurations like lower brightness and turning off bluetooth etc when the battery treshold kicks in, but I'd expect it to restore my setup once the battery level goes above the treshold again. Atm I have to manually undo all the changes that the battery saving functionality does, basically once a day. Isn't there a "smarter" app that restores my settings before the energy saving mode kicks in?
The battery: I've streamed 30 min of music from the device to my car's bluetooth stereo, and it removed 26% of the battery charge. I'm on fw KE2 cause it seems that KE7 is even worse when it comes to power consumption. Still, isn't it too much?
Volume: I've turned it all the way up both with the side button and inside settings -> sounds (all 4 of them). Still, if someone in my office is talking I miss a sms reception etc. It never happened to me when I had the 5800 express music, so I'm not deaf
App notifications: I left my phone near my bed, there is at least 3 out of 4 bars of 3G signal, facebook is set on 30 min updates, accuweather on 3 hours, info-costs every hour, the phone never turned off nor lost the 3g coverage, yet it missed completely or partially a LOT of updates
App settings: app settings also seem a bit random. I have an app called noLed to show led notifications on the screen when it's locked. I had enabled it, checked the "start noled after phone reboot" and all, and even if the phone never even rebooted, after a day or two I went it and the first checkbox (activate NoLed) was misteriously turned off...
Thanks everyone,
TD
I'm particularly interested in a response to the energy saving that is stock on the sgs2.
However what i want to know is if the energy saving is active, or whether 'energy saving enabled' simply means it is ready to cut in when battery gets down to set target.
Any response to the above questions would be appreciated.
Ta in advance.
Sent from my GT-I9100 using XDA App
I don't think there's any difference between Voice command and Voice talk. Different interface is all I guess?
yamanote said:
I don't think there's any difference between Voice command and Voice talk. Different interface is all I guess?
Click to expand...
Click to collapse
Isn't it kinda silly to have two different interfaces for a program I'm not even really supposed to use via its interface, but via voice commands?....
samed1983 said:
I'm particularly interested in a response to the energy saving that is stock on the sgs2.
However what i want to know is if the energy saving is active, or whether 'energy saving enabled' simply means it is ready to cut in when battery gets down to set target.
Any response to the above questions would be appreciated.
Ta in advance.
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
As far as I've understood, when it says 'energy saving enabled' in the notification panel it just means that the feature is turned on, but it doesn't necessarely mean that it's gone into 'energy saving mode' already.
My issue with it remains, I don't want it to disable account sync, bluetooth, turn down the brightness etc, and the day after, once the phone is recharged, I have to re-enable all of them...
tylerdurden83 said:
Isn't it kinda silly to have two different interfaces for a program I'm not even really supposed to use via its interface, but via voice commands?....
Click to expand...
Click to collapse
Got it figured out.
Voice command is for when you're sitting down or something and can give the phone your total attention, while Voice talk is for when you're driving or something.
In Voice talk you can enable 'driving mode', which reads out and incoming texts and numbers of the phone which is calling you.
Even with that disabled, you can just say 'Hi Galaxy' or 'Hey Galaxy' and it will start listening to your commands.
(useful while you're just driving and don't want to be distracted by having to hold down the home button (ahem iPhone) or tap the Tap to speak button)
Still a bit redundant (why not just have voice talk?) but at least there's a difference
I now see what you mean about sync being disabled after leaving power saving mode.
Had a scout about and can't find a solution to this.
Anyone have a solution because this is very annoying.
Sent from my GT-I9100 using XDA App
I'm a bit puzzled by the battery life. I mean, afterall they advertise the various components of the gs2 as battery saving (for example the actually turned off pixels of the super amoled, or the dual core).
So, by logic, if the more advanced parts of it are energy saving compared to other less advanced models, why isn't it consuming less battery?....
Any more info?
I have a new question, is it normal under KE2 that the wi fi can't catch the signals almost al all?
At university I couldn't even detect the network, while the guy next to me with an iphone4 had full signal strength. On the train I had 1 line and it kept disconnecting, while my mate with the nokia 5800 express had no issue with it.
Even at my house going from my desk where the router is to my bed right in front of it, it already starts to drop significantly.
Another issue that I've noticed is that sometimes even tho there is 3g coverage the apps won't refresh. For example, AccuWeather hasnt refreshed since the day before, or manually firing a refresh of the contacts in my WhatsApp list ends in a "update failed, try again later" message, but after rebooting the phone it magically works right away...

Anyone else using Tasker? If so, what profiles you setting up?

I love Tasker. I use it a lot on my phone for all kinds of automated tasks. For the Prime, I have set up the following so far:
1. at 11pm it shuts off WiFi and starts back up at 6:30am (save battery if I forget to put it on charger)
2. at 10pm it shuts off BT and never starts back up in morning (save battery if I forget to put it on charger or forget to turn BT off)
3. at 10pm it shuts off GPS and never starts back up in morning (save battery if I forget to put it on charger or forget to turn GPS off) - UPDATE: I see now this one will not work in the HC OS as the system requires user interaction to set GPS
4. at 11pm it shuts off Sync and starts back up at 6:30am (save battery if I forget to put it on charger and I dont want to hear gMail alerts all nigh)
5. When on power cable, it (a) turns off the need to unlock it (b) leaves the screen on
6. give me an alert tone at 20% battery
7. if it is in my car and attached via BT it turns up the brightness (since I am outside) and leaves on display (as I normally also have it plugged in) so I can use things like Torque and the Navi/GPS and see the screen
thats all for now... anyone else?
Lock-N-Load said:
I love Tasker. I use it a lot on my phone for all kinds of automated tasks. For the Prime, I have set up the following so far:
1. at 11pm it shuts off WiFi and starts back up at 6:30am (save battery if I forget to put it on charger)
2. at 10pm it shuts off BT and never starts back up in morning (save battery if I forget to put it on charger or forget to turn BT off)
3. at 10pm it shuts off GPS and never starts back up in morning (save battery if I forget to put it on charger or forget to turn GPS off)
4. at 11pm it shuts off Sync and starts back up at 6:30am (save battery if I forget to put it on charger and I dont want to hear gMail alerts all nigh)
5. When on power cable, it (a) turns off the need to unlock it (b) leaves the screen on
6. give me an alert tone at 20% battery
7. if it is in my car and attached via BT it turns up the brightness (since I am outside) and leaves on display (as I normally also have it plugged in) so I can use things like Torque and the Navi/GPS and see the screen
thats all for now... anyone else?
Click to expand...
Click to collapse
Never heard of that but it sounds like an awesome app
Sent from my Transformer Prime TF201 using xda premium
Lock-N-Load said:
I love Tasker. I use it a lot on my phone for all kinds of automated tasks. For the Prime, I have set up the following so far:
1. at 11pm it shuts off WiFi and starts back up at 6:30am (save battery if I forget to put it on charger)
2. at 10pm it shuts off BT and never starts back up in morning (save battery if I forget to put it on charger or forget to turn BT off)
3. at 10pm it shuts off GPS and never starts back up in morning (save battery if I forget to put it on charger or forget to turn GPS off)
4. at 11pm it shuts off Sync and starts back up at 6:30am (save battery if I forget to put it on charger and I dont want to hear gMail alerts all nigh)
5. When on power cable, it (a) turns off the need to unlock it (b) leaves the screen on
6. give me an alert tone at 20% battery
7. if it is in my car and attached via BT it turns up the brightness (since I am outside) and leaves on display (as I normally also have it plugged in) so I can use things like Torque and the Navi/GPS and see the screen
thats all for now... anyone else?
Click to expand...
Click to collapse
Haven't gotten my Prime yet, but that Tasker app sounds pretty cool. It sound kind of like JuiceDefender, except there's a lot more options.
With those settings, what kind of Battery life do you get?
If you don't know what Tasker is, you have no idea how powerful it is. It is amazing, you can control virtually every function, setting, alert, automation, etc. What I have done here is the tip if the iceberg. I have some for my phone that sense I am in my car, thanks to BT, and does a series of 3 to 4 steps like turn up brightness, play a tone to tell me it is connected to my car, start up a certain app, etc..
Lock-N-Load said:
If you don't know what Tasker is, you have no idea how powerful it is. It is amazing, you can control virtually every function, setting, alert, automation, etc. What I have done here is the tip if the iceberg. I have some for my phone that sense I am in my car, thanks to BT, and does a series of 3 to 4 steps like turn up brightness, play a tone to tell me it is connected to my car, start up a certain app, etc..
Click to expand...
Click to collapse
That's epic.
Sent from my Transformer Prime TF201 using xda premium
Tasker is pretty awesome!
A bit of a learning curve, but once you figure it out, the sky is the limit.
I have a profile that if I receive a text while driving, it autoresponds telling the person texting and driving is dangerous and I am currently driving at xx MPH and will get with them later.
I get a lot of people inquiring about that one.
The most useful one I have is it looks at my calendar and if it is during the time of my meeting, it automatically puts my phone on vibrate. That way I don't have to worry about it. When meeting is over, it reverts back to normal.
Yes, tasker is INCREDIBLE. Once you figure it out, it can almost double your battery life (at least it did on my phone).
You can try reddit.com/r/tasker, where most people post awesome tasker profiles and ask for help accomplishing certain settings. There are also a ton on the internet if you google search for tasker set-ups:
http://tasker.wikidot.com/profile-index (this is a great one)
I have been using Tasker for a while. It is incredible. My current challenge is switching to switftkey when I have my TFP keyboard undocked, and to the asus keyboard when the keyboard is docked. Tasker can detect the keyboard being plugged in, but not being unplugged. If anyone solves this, I would love to hear about it.
Tasker is one of the defining differences between ios and Android. Really shows off how powerful android can really be if you're willing to take the time
OP wanna post your profiles? And maybe a quick writeup (or link) how to apply them for those who dont know...
I used to use tasker for BLN to enable notifications from various apps that normally didnt work with BLN, as well as making my phone vibrate every minute or so if theres a missed notification (text, etc) for aprox 5 minutes just so that way if i was with a customer at work (retail) i could deal with the customer but wouldnt forget about the messages i got
Awesome app indeed.
poniard said:
I have been using Tasker for a while. It is incredible. My current challenge is switching to switftkey when I have my TFP keyboard undocked, and to the asus keyboard when the keyboard is docked. Tasker can detect the keyboard being plugged in, but not being unplugged. If anyone solves this, I would love to hear about it.
Click to expand...
Click to collapse
Put a small SD card in the dock. Have Tasker check when it mounts/unmounts.
Might not work since there's no notification on unmounting /Removable/SD. Maybe have it check for access to /Removable/SD every X minutes?
poniard said:
I have been using Tasker for a while. It is incredible. My current challenge is switching to switftkey when I have my TFP keyboard undocked, and to the asus keyboard when the keyboard is docked. Tasker can detect the keyboard being plugged in, but not being unplugged. If anyone solves this, I would love to hear about it.
Click to expand...
Click to collapse
if you are rooted, keyboard manager is a free app in the market that does this. when im not docked, i gvet thumb keyboard 4. when i am docked, asus stock. hasnt failed me yet
Got mine setup with a profile to set off an alarm when the microsd gets unmounted.
Almost lost my mircrosd once before with it popping out and not realising to later - hopefully this should help
I have 4 profiles that I copied from my phone to do the same tasks:
Home: When near my Home wi-fi AP, turn on wi-fi. When no longer near the AP, turn off wi-fi.
Sleep Mode: Put device on silent, turn on airplane mode (11PM-5AM).
Work Location: When near my office wi-fi, turn on wi-fi, turn on silent mode. When no longer near the AP (i.e. not at work), turn off wi-fi, turn off silent mode off.
Work Timer: During work days/hours (M-F 6-3), turn silent mode on. After work hours, turn silent mode off. Exception: if there's an event with a description of "Vacation" on the calendar. If that exists, device does not go into silent mode.
There are others that I use on my phone.
korax85 said:
Got mine setup with a profile to set off an alarm when the microsd gets unmounted.
Almost lost my mircrosd once before with it popping out and not realising to later - hopefully this should help
Click to expand...
Click to collapse
BRILLIANT! I have actually seen no use for tasker for myself til now. I've always REALLY liked he concept, but there isn't ANYTHING that I want happening automatically. Until now. Thanks!!!
korax85 said:
Got mine setup with a profile to set off an alarm when the microsd gets unmounted.
Almost lost my mircrosd once before with it popping out and not realising to later - hopefully this should help
Click to expand...
Click to collapse
GREAT idea. Just set one up so "card Unmounted" plays an Alarm that will go on and on and on until I address it.
stretchwookie said:
but there isn't ANYTHING that I want happening automatically. Until now. Thanks!!!
Click to expand...
Click to collapse
Really, you don't want to shut BT or WiFi or GPS or Sync while you sleep to conserver battery overnight?? That alone is a useful set of tasks.
Lock-N-Load said:
GREAT idea. Just set one up so "card Unmounted" plays an Alarm that will go on and on and on until I address it.
Really, you don't want to shut BT or WiFi or GPS or Sync while you sleep to conserver battery overnight?? That alone is a useful set of tasks.
Click to expand...
Click to collapse
i understand how powerful this tool can and is. but i shut my prime off at night... there is no battery to conserve... lol sorry. im glad it works for you guys though! it REALLY may be worth investing the money into though JUST for microsd unmount alerts.
Something tells me you don't fully grasp the true depth & scope of Taskers abilities. Thus far the tasks listed are child splay that barely scrape the surface.
Lock-N-Load said:
Something tells me you don't fully grasp the true depth & scope of Taskers abilities. Thus far the tasks listed are child splay that barely scrape the surface.
Click to expand...
Click to collapse
i believe you are correct. but i am not very imaginative. so its very possible that i cant just find a use for it, doesnt meant that it isnt there. i plan on doing some research into some of the already made profiles to see if someone interests me. so far, the unmount microsd seems to be the only plausible for me
Not sure how I missed this thread before; I'm a huge fan of Tasker. All of what follows was written for my Samsung Epic 4G: I don't even have Tasker installed on my TFP because so much of what I do is smartphone-focused. Sooner or later I'll get around to putting together some tablet-specific scripts.
Surreptitiously snaps a photo from the front-facing camera every time the screen is unlocked, with no visual or audio indication. This is set up so as to always keep the last 2 photos stored, and will overwrite older photos. Images can be retrieved remotely via a secret text message.
Set up secret text messages that trigger the phone to gather information such as GPS location (reverse geocoded to an address), speed, heading, altitude, local cell tower ID and signal strength, nearby and connected WiFi SSIDs, WAN IP, currently open app, whether the screen is turned on, battery strength, and covert photographs taken from the front and rear cameras (including the one that was captured from the front camera when the screen was last unlocked) and text/email me back without notifying whomever has the phone. Another message will make my phone freak out, announce it's been stolen, announce that all of the above information has been sent to the owner of the phone, flash the LED in an SOS, and force all outbound calls to go to me.
If I send a secret message to my phone, it calls me back, and enables speakerphone, so I can speak with whomever has my phone. It also reroutes any outbound calls to my number. I can also ask it to send me photos from the front and rear cameras on the phone.
Ensured that when the phone is connected to my home's local cell tower, it always rings when I call it. I never have to worry about it being on vibrate while under a couch cushion or in a snowbank next to the driveway.
When I plug in a headset or it connects to my car's bluetooth, it pops up a list of media applications for me to use, and if I don't select one or back out of the selection, it automatically starts my Pandora, and kills the app when I unplug / disconnect. Basically, I get in my car, my music plays. I get out, it stops. Same with headphones.
When it detects the cell tower near my work, it enables vibrate.
If it detects a cell tower that is not the one near my home or work, it turns on the ringer and disables WiFi (unless I re-enable it).
If someone calls me that I don't even want a voicemail from, I add their number to a list in Tasker, and when they call me, it picks up the line and immediately hangs it up. Working on one that will play back a fake "Your call could not be completed as dialed" message.
Checks accuweather.com in the morning on work days to see if it's raining, snowing, sleeting, or hailing. If any of the above, it rings an alarm 30 minutes early. I also built in snooze functions and a voice notification in the morning about the outside temperature and conditions. This script recently broke (accuweather probably did something to affect the output of my HTTPGet) so I've been using the voice notification in Alarm Clock Plus, though it doesn't wake me up early. With current weather conditions I'm going to have to get my script fixed for the head start. My how-to on this script is on Tasker's wiki, here: http://tasker.wikidot.com/weather-clock
If I start Google Navigation with GPS disabled, it closes the app, enables GPS, and starts the app back up again. No more fiddling with GPS settings while on the go. Sometimes this script is not 100% reliable... I've got to look at it again some time to figure out why.
I made a blog post a while back about how to take the pictures remotely with the camera, and you can read about it here:
http://sean-the-electrofreak.blogspot.com/2011/10/more-fun-with-tasker-covert-mugshots.html
The email-attachment part can also be used to send audio recordings, which I've not actually implemented yet but wouldn't be difficult.
I've been putting off for the last 6 months or so my write-up on all the rest... I just have to find time for it!

Programmable NFC tags by Samsung for select Galaxy phones

I know it doesn't mention the Note, but I'd be hard pressed to see this not being ported over if not part of the list of devices. Just thought it was nifty and wanted to share
http://www.engadget.com/2012/06/13/tectiles-programmable-nfc-stickers-for-select-members-of-samsun/
i would like to try this as well. i'd love to set one up to swtich wifi when im at home, one to switch the ringer off when at work.. i'll probably get one to see if it works.
sfb14 said:
i would like to try this as well. i'd love to set one up to swtich wifi when im at home, one to switch the ringer off when at work.. i'll probably get one to see if it works.
Click to expand...
Click to collapse
can't you just use tasker for that, using cell tower signals?
kaishi00 said:
can't you just use tasker for that, using cell tower signals?
Click to expand...
Click to collapse
You can, but it's rather broad...
NFC ReTag, free app in the market, lets you use ANY NFC tag (writeable or not) to set various parameters on the phone, but more importantly IMO is it can run any Tasker task.
When I get in my car and plug into the AC and put my phone in the holder, there's an NFC tag there. It's seen, Car Home starts, Waze starts, depending on the time of day the screen brightness changes, volume increases etc..
When I get to work I scan a tag on my keyboard and it forces the phone into Work mode (I work close to home and sometimes wind up on the same tower on each, leading to the phone bouncing between profiles).
I also have a sleep tag, but I never use it.. Sleep mode = Plugged in after 10pm and turned face-down, all in Tasker.

Useful Tasker Profiles

I figured we could start a collection of our Tasker profiles that we all use on our G2s. I haven't seen a thread for our specific phone while searching, so I wanted to start one (if there is one and I missed it, then mods, please delete this).
So what do you all use for Tasker profiles? I have one set to turn data on when my screen is on and off when my screen is off, but that's it for now really. I'm not too handy with Tasker yet, but I'd like to get some others set up in the future.
Everything?
http://theblackmoor.net:8081/tasks.txt
khaytsus said:
Everything?
http://theblackmoor.net:8081/tasks.txt
Click to expand...
Click to collapse
holy shhhhhh
Sent from my VS980 4G using Tapatalk
thx
Juls317 said:
I figured we could start a collection of our Tasker profiles that we all use on our G2s. I haven't seen a thread for our specific phone while searching, so I wanted to start one (if there is one and I missed it, then mods, please delete this).
So what do you all use for Tasker profiles? I have one set to turn data on when my screen is on and off when my screen is off, but that's it for now really. I'm not too handy with Tasker yet, but I'd like to get some others set up in the future.
Click to expand...
Click to collapse
thanks.
can anyone explain how to set Tasker to turn my mobile data off when my screen is off, but to kick it back on to sync every X minutes and as long as there isn't an active transfer?
Juls317 said:
can anyone explain how to set Tasker to turn my mobile data off when my screen is off, but to kick it back on to sync every X minutes and as long as there isn't an active transfer?
Click to expand...
Click to collapse
This is default behavior. Unless you're charged by connection time, it is pointless.
fallenwout said:
This is default behavior. Unless you're charged by connection time, it is pointless.
Click to expand...
Click to collapse
This isn't default behavior. What he's asking is to disable all background network activity when his screen is off. Which is pretty silly IMO, but perhaps he wants to monitor his data usage that closely.
Context: State Display->Display State: Off
Task:
Net->Mobile Data: Off
That should revert when the screen is on, so it will turn Mobile Data back on when the screen is back on.
If you really want to run every 15 minutes (for example)....
Context: State Display->Display State: Off
Time->From: 00:00 to 23:59 Repeat: 15 minutes
Task:
Net->Mobile Data: On
Task->Wait 1 minute
However, it might not be this simple. You might need additional logic, for example if Tasker is running the "turn data on for a minute" task and you turn the phone on, it might turn Mobile Data back off, because it'll revert the task. Things like this can introduce a little complication to such things, but not difficult. You could always check if the screen is on before turning off data, etc.
If you really want a way to check if traffic is being transfered, there's a post on XDA about it I found first thing when googling. http://forum.xda-developers.com/showthread.php?t=1892232
G2 running CM11, disable double-tap wake during calls
I know this isn't a request thread but you guys seem to know your way around Tasker. CM11 has the "double-tap wake" option in Display settings but a common issue is that it isn't disabled by proximity sensor during phone calls causing the screen to turn on and go buck wild sending"face emails" and trading your fantasy football QB away. How can I turn double-tap wake off in a task?
Thanks,
Chip
this is a really useful profile, turns data off when screen is off only if there is no traffic, and checks for new messages or syncs apps every 10 minutes, does other stuff to, check it out
http://forum.xda-developers.com/showthread.php?t=2127481

Categories

Resources