Related
Hey Guys.
So I have a Tab 10.1, bought by me in the UK, tho I believe the model I have is a French one (bought it from Expansys) as that's the language it started up in.
I have tried to root my tab, using this method http://forum.xda-developers.com/showthread.php?t=1239185/
However, no matter what rom I try to install, my screen ends up flickering with lots of lines across it, after about 5 mintues, rendering it useless. I have tried to install a stock rom, and unroot using Odin. I downloaded Root Checker from the market and it says I am now not rooted. I am currently running a stock 3.1 Rom.
But I don't know what to do now. Whatever rom I seem to choose to flash I still get the flickering issue.
I also got the flickering in CWM, but got it working using this guide http://forum.xda-developers.com/showpost.php?p=27830023&postcount=41
but it didn't stop the flickering when I installed a new rom.
Can someone help, pleaseeeeeeee? :fingers-crossed:
Ok, I seem to have fixed the screen flickering.
I did this by flashing the file P7510XABKMN_P7510UEKMM_HOME.tar.md5 (which was in a file I found called sgt10.1_root_unroot) through Odin.
I'm not sure how to root and/or flash now as I don't want the same problems again.
I have no CWM because when I boot into recovery I have no option to install zip from SD card.
My About Section tells me:
Model Number GT-P7510
Android 3.2
Build No. HTJ85B.UEKMM P7510UEKMM
So I am guessing I have managed to get a stock rom back on the device, which has solved the flickering isses.
I have no Superuser and so am not rooted.
My aim is to install Tasker 14.
Does anyone know the reason why I got the flickering from Clockwork, and how I can flash without getting it?
Going to go to bed now since I've rescued its functionality! I'll get back on trying to flash it tomorrow.
Thanks
So I managed to root and install CWM again, flickering seemed to not exist.
I then tried to flash Task 14 and have the screen flickering again.
I flashed the bootloader file before I did any of this, as of these instructions: http://forum.xda-developers.com/showpost.php?p=27830023&postcount=41
Hope u have got the solution now
Sent from my GT-P7500 using xda premium
Had same problem Look at this thread
http://forum.xda-developers.com/showthread.php?t=1691875
Thanks for your reply.
Weirdly, the AOKP, CM9, and my current rom Overcome all work on my tablet, without the screen issues. The only time I get the screen scrambling is when install Task 14 (tried both fat and slim versions). This is on a clean install.
No idea why this is. But I'm happy the screen issues are sorted and I'm now running the modified honeycomb rom that is Overcome. Just got to wait for the Camera drivers for ICS
Cheers
Sent from my GT-P7510 using xda app-developers app
Before continuing reading, please keep in mind that the problem I am asking support for was already solved for my own. What I want to know is how did it happen. For prevention, you know.
It all started when I flashed the Black Box ROM 2.0.2 (http://forum.xda-developers.com/showthread.php?t=1834915) It flashed normally, without any problem. But, since it lacked the Xposed Framework, I installed it manually, downloading from its thread, and choosing a full install. Using the Framework I downloaded Gravity Box and the Youtube Adaway, before downloading Youtube. Since the modules needed a reboot to work, I rebooted. And this is when the bad things started to happen.
The ROM did not start. It went through the BlackBox logo, but when it appeared that the SIM unlock was going to pop up, then the phone turned off. This happened many times. So I decided to do a full wipe and install another ROM. The problem was that the phone didn´t allowed me to access the recovery.
I was using the PhilZ Touch 6, but when I pressed Volume up+Menu+Power it did not work. The only thing that worked was the Odin Menu, and I got stuck at it, I couldn´t get out the Odin Menu. So, seeing that the phone wasnt going to work anyways, I flashed a 4.3 stock ROM through Odin.
As I suspected, the ROM got stuck at boot, and got a bootloop. So then I flashed another recovery, and flashed good ol´ CWM. And It worked..for a while. The phone would shut down after some seconds. So then I tried to flash TWRP, but it lasted about one second and then the phone shut down again.
Since I was using Odin 3.03, I downloaded Odin 3-04 Moded Edition, from the Modem thread, and then reflashed CWM. In this time, it worked without failing, and I could do a full wipe and flashing an old Cyanogenmod 4.2.2 ROM, finally solving the problem. The day after I flashed Ultima ROM and at the moment it goes fine, without any problem. Which is weird, because it too uses Gravity Box and Xposed Modules. I even installed new modules, rebooted the phone and it works fine, without any problem.
What I want for the people here is that someone explains to me what happened, because the BlackBox ROM looked gorgeous and I wanted to give it a long try. And because I spent an entire night solving that problem, and well, I wont sleep in peace until I get to know what happened to that bastard
r1k1v1 said:
Before continuing reading, please keep in mind that the problem I am asking support for was already solved for my own. What I want to know is how did it happen. For prevention, you know.
It all started when I flashed the Black Box ROM 2.0.2 (http://forum.xda-developers.com/showthread.php?t=1834915) It flashed normally, without any problem. But, since it lacked the Xposed Framework, I installed it manually, downloading from its thread, and choosing a full install. Using the Framework I downloaded Gravity Box and the Youtube Adaway, before downloading Youtube. Since the modules needed a reboot to work, I rebooted. And this is when the bad things started to happen.
The ROM did not start. It went through the BlackBox logo, but when it appeared that the SIM unlock was going to pop up, then the phone turned off. This happened many times. So I decided to do a full wipe and install another ROM. The problem was that the phone didn´t allowed me to access the recovery.
I was using the PhilZ Touch 6, but when I pressed Volume up+Menu+Power it did not work. The only thing that worked was the Odin Menu, and I got stuck at it, I couldn´t get out the Odin Menu. So, seeing that the phone wasnt going to work anyways, I flashed a 4.3 stock ROM through Odin.
As I suspected, the ROM got stuck at boot, and got a bootloop. So then I flashed another recovery, and flashed good ol´ CWM. And It worked..for a while. The phone would shut down after some seconds. So then I tried to flash TWRP, but it lasted about one second and then the phone shut down again.
Since I was using Odin 3.03, I downloaded Odin 3-04 Moded Edition, from the Modem thread, and then reflashed CWM. In this time, it worked without failing, and I could do a full wipe and flashing an old Cyanogenmod 4.2.2 ROM, finally solving the problem. The day after I flashed Ultima ROM and at the moment it goes fine, without any problem. Which is weird, because it too uses Gravity Box and Xposed Modules. I even installed new modules, rebooted the phone and it works fine, without any problem.
What I want for the people here is that someone explains to me what happened, because the BlackBox ROM looked gorgeous and I wanted to give it a long try. And because I spent an entire night solving that problem, and well, I wont sleep in peace until I get to know what happened to that bastard
Click to expand...
Click to collapse
OK first black box already has xposed in ROM control settings.. so maybe because you manually installed it it may have caused conflicts... Don't know why you got a recovery bootloop... but maybe due to same problems... And I am also using blackbox 2.1 and so far it is fantastic...
Sent from my GT-I9300 using xda app-developers app
Partition structure on these phones is very fragile, one bad shutdown can corrupt one or more partitions at the same time. I'd suggest the combination of mods applied caused the kernel panic, while data was being written.
Subsequent events read like normal solution to corruption, it shouldn't happen again but best to apply framework mods one at a time.
Sent from my GT-I9300 using Tapatalk
kunal1540 said:
OK first black box already has xposed in ROM control settings.. so maybe because you manually installed it it may have caused conflicts... Don't know why you got a recovery bootloop... but maybe due to same problems... And I am also using blackbox 2.1 and so far it is fantastic...
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Hmm, I don´t remember that the BlackBox 2.0.2 had any Framework...thats why I did a manual installation. But I will try the new version 2.1. Hopefully the problems may have been solved.
boomboomer said:
Partition structure on these phones is very fragile, one bad shutdown can corrupt one or more partitions at the same time. I'd suggest the combination of mods applied caused the kernel panic, while data was being written.
Subsequent events read like normal solution to corruption, it shouldn't happen again but best to apply framework mods one at a time.
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
Interesting. So I have to apply mods one by one? Or can I add multiple mods because corruption has already been solved?
On a side note, when I boot the phone the red exclamation mark that used to appear has disappeared. Does that means that I somewhat reseted the flash counter to 0?
I purchased an AT&T SGH-i717 and was told everything worked. When I checked it out, everything seemed fine too. After using it for a couple hours I realized it just seemed to reboot at random. I rebooted into recovery and did a factory reset and wiped the cache. After rebooting it...it would get stuck at the AT&T screen. I then installed the latest stock rom 4.4.2 using Odin and it booted up fine but I got the no sim card error. I put in an AT&T sim card and rebooted but got a sim not provisioned error. I then tried a T-Mobile card and I didn't get the error and it showed signal bars but when I tried to dial it said emergency calls only. I tried a Verizon sim card just to see what kind of error I would get but it was just the same as the T-Mobile sim. I thought it might a corrupted rom so I tried installing the latest nightly CyanogenMod using CWM but got error status 7. I then tried various custom and stock roms including AOKP, BeanStalk, and several different versions of CyanogenMod but always got the same error status 7 msg. I then came across a forum posts stating that CWM no longer works for the SGH-i717. I downloaded the latest TWRP touch recovery and was able install the latest stable CyanogenMod but it would not boot past the animated CyanogenMod logo even after sitting for over an hour. At that point I gave up and decided to just go back to the stock rom. I rebooted into TWRP and the slide to unlock would not work anymore. I had to install CWM using Odin which allowed me to flash back to the stock 4.4.2 rom. After doing another factory reset and wiping the cache then rebooting...the touch screen stopped working. I then flashed it back to the stock 4.0.4 rom but the touch screen still does not work. While trying to figure out what happened I realized the pen still works and touch screen buttons on the bottom but thats it. Also the pen only works on the screen and not on the touch screen buttons. I've been messing with this for 3 days and will probably just sell it for parts but wanted to post this problem so if anyone else had this problem they would know what I've already tried. I did also take apart the phone and clean the connections but that didn't help either.
If anyone has a suggestion for something I haven't tried...please let me know. My last attempt will be install the Padawan JB rom from this post:
http://forum.xda-developers.com/showthread.php?t=1907203
Thanks
Right out of tge gate, there is no stock 4.4.2 for this device. Not official anyway. 4.1.2 is official OS.
Status 7 means your recovery needs updating.
CWM does work and the newest CWM touch is just dandy.
I would try going all the way back. You need to be totally clean.
Factory
Cache
Davlik
Format
Go to Kies and go with emergency firmware recovery.
Get back to stock and see what is working.
Clean clean clean, the best way for anyone to help you. You would be at the best starting point.
Maybe do a little reading as many of your issues have been documented and solved. None of them are major.
Start from scratch and folks can get you running again.
Sent from my SAMSUNG-SGH-I527 using xda app-developers app
captemo said:
Right out of tge gate, there is no stock 4.4.2 for this device. Not official anyway. 4.1.2 is official OS.
Status 7 means your recovery needs updating.
CWM does work and the newest CWM touch is just dandy.
I would try going all the way back. You need to be totally clean.
Factory
Cache
Davlik
Format
Go to Kies and go with emergency firmware recovery.
Get back to stock and see what is working.
Clean clean clean, the best way for anyone to help you. You would be at the best starting point.
Maybe do a little reading as many of your issues have been documented and solved. None of them are major.
Start from scratch and folks can get you running again.
Sent from my SAMSUNG-SGH-I527 using xda app-developers app
Click to expand...
Click to collapse
Thanks for replying...I hadn't used Kies in awhile becuase it never seemed to work right. I downloaded the latest version and it looks like they made a lot of improvements. I did the factory restore and wiped the cache then installed the latest firmware thru Kies. Everything seemed to work fine but after rebooting the touch screen doesn't work at all, not even with the pen. The touch screen buttons seem to still work but its stuck at the AT&T Ready2go screen because I can't hit cancel or get started buttons.
Thanks
cycloneus said:
Thanks for replying...I hadn't used Kies in awhile becuase it never seemed to work right. I downloaded the latest version and it looks like they made a lot of improvements. I did the factory restore and wiped the cache then installed the latest firmware thru Kies. Everything seemed to work fine but after rebooting the touch screen doesn't work at all, not even with the pen. The touch screen buttons seem to still work but its stuck at the AT&T Ready2go screen because I can't hit cancel or get started buttons.
Thanks
Click to expand...
Click to collapse
well my friend, you had the phone apart once already, I am no expert, but my guess is this is no software issue. maybe some connections came loose. in my time here, I have not come across this issue. I do not have the brain pan nor the courage to take my phone apart.
good luck to you.
maybe someone else will mosey on by.
cycloneus said:
Thanks for replying...I hadn't used Kies in awhile becuase it never seemed to work right. I downloaded the latest version and it looks like they made a lot of improvements. I did the factory restore and wiped the cache then installed the latest firmware thru Kies. Everything seemed to work fine but after rebooting the touch screen doesn't work at all, not even with the pen. The touch screen buttons seem to still work but its stuck at the AT&T Ready2go screen because I can't hit cancel or get started buttons.
Thanks
Click to expand...
Click to collapse
My guess is the digitizer has gone bad if odin &/or kies can't fix the issue at hand.
Hi. I've got a challenge for the experts
I have a galaxy s4 (i9505) and currently on cyanogenmod 11-20140414-nightly so its running on 4.4.2
The minute i got my phone, i put foxhound rom and was on4.2.2 that time and everything was fine. It was about june last year. A couple of weeks ago, i decided to have a go at other roms or update to 4.4.2 so i tried foxhound rom that ran on4.4.2. This is when the problems started. The first problem was the signal was greatly affected that i could not get any signal indoors. So i tried several other roms like omega rom, cyanogenmod, wanamlite, wicked, virgin rom and several others but none of them perfectly worked. I always cleared cache and restore factory settings but still there were problems. On some roms the camera wont work as if there is another app using it. On others, i cant get any signal even though im in an area where i used to get strong signals. Another big problem is that i cant make a call! The screen goes black and can't do anything until the call gets disconnected. I can't use voice services like skype, ym, everything that uses the mic as if there is an app or service using it. When i put the jack to use the headset, i dont get the notification that im on headset unlike before.
So i decided to use stock rom on 4.3. Now i have even bigger problems. In addition to the previous problems stated, the wifi won't turn on but i can get a signal outside. Even though i have already removed the microsd card and wiped cache and restore to factory settings, the phone still says that the device was modified so i can't really return it even though it is still under warranty.
So now i decided to root it again and temporarily use cyanogenmod since the wifi works, texts and the internet works.
Btw, youtube doesnt work also. It doesnt play.
Sorry for the vrry long post but i just want to give much info as possible..
Thanks so much
Noypi14 said:
Hi. I've got a challenge for the experts
I have a galaxy s4 (i9505) and currently on cyanogenmod 11-20140414-nightly so its running on 4.4.2
The minute i got my phone, i put foxhound rom and was on4.2.2 that time and everything was fine. It was about june last year. A couple of weeks ago, i decided to have a go at other roms or update to 4.4.2 so i tried foxhound rom that ran on4.4.2. This is when the problems started. The first problem was the signal was greatly affected that i could not get any signal indoors. So i tried several other roms like omega rom, cyanogenmod, wanamlite, wicked, virgin rom and several others but none of them perfectly worked. I always cleared cache and restore factory settings but still there were problems. On some roms the camera wont work as if there is another app using it. On others, i cant get any signal even though im in an area where i used to get strong signals. Another big problem is that i cant make a call! The screen goes black and can't do anything until the call gets disconnected. I can't use voice services like skype, ym, everything that uses the mic as if there is an app or service using it. When i put the jack to use the headset, i dont get the notification that im on headset unlike before.
So i decided to use stock rom on 4.3. Now i have even bigger problems. In addition to the previous problems stated, the wifi won't turn on but i can get a signal outside. Even though i have already removed the microsd card and wiped cache and restore to factory settings, the phone still says that the device was modified so i can't really return it even though it is still under warranty.
So now i decided to root it again and temporarily use cyanogenmod since the wifi works, texts and the internet works.
Btw, youtube doesnt work also. It doesnt play.
Sorry for the vrry long post but i just want to give much info as possible..
Thanks so much
Click to expand...
Click to collapse
So, which type of rom do you want to be on, assuming most of the things work properly? I don't want to try to address all those issues because there are different ones for the different setups and would take forever. Most likely signal issues are from not using a matched modem with the firmware / rom you are running. Do you know the original carrier / region the phone is from so we can make sure you get the right stuff installed?
Please provide details on the the currently installed baseband version. Also, what is the last official version of Samsung's software that you installed via Odin or OTA (not via custom rom)?
es0tericcha0s said:
So, which type of rom do you want to be on, assuming most of the things work properly? I don't want to try to address all those issues because there are different ones for the different setups and would take forever. Most likely signal issues are from not using a matched modem with the firmware / rom you are running. Do you know the original carrier / region the phone is from so we can make sure you get the right stuff installed?
Please provide details on the the currently installed baseband version. Also, what is the last official version of Samsung's software that you installed via Odin or OTA (not via custom rom)?
Click to expand...
Click to collapse
Thanks for your reply.
The current cyanogenmod is fine although i prefer the virgin rom. but i can go back to virgin once the problems have been rectified.
I agree that the signal issue has something to do with the modem so i tried different modems using odin but the XXUBMEA wouldnt change despite trying several modems and several times.
The phone is on three network (uk) with its current baseband 19505XXUBMEA.
The official rom i tried was on 4.3 and kies said it was the latest
Thanks again
Alright, I'm with ya so far. I'll look into the rom situation when I get back in front of the PC, but the trick with updating the modem is you gotta flash it twice in a row before you reboot unless you flash official firmware.
es0tericcha0s said:
Alright, I'm with ya so far. I'll look into the rom situation when I get back in front of the PC, but the trick with updating the modem is you gotta flash it twice in a row before you reboot unless you flash official firmware.
Click to expand...
Click to collapse
Thanks again for replying.
What i havent actually tried (which i'm reading at the moment) is the formatting of data under the advanced options on twrp. I dunno if it will make a difference say i try a new rom. I don't mind trying and starting from scratch. Like format data then install a new rom. Do u think this will make a difference? (will this be similar to formatting a dard drive on a pc before installing windows?)
What i suspect is there is nothing wrong with the roms i've tried but something in the installation got messed up and remains there even after wiping the data.
I think i have tried doing it twice only to find out that it didnt change the modem despite odin saying pass.
Should i format data then install a fresh rom?
Hard
but challeng refused
Ok, so there is something odd here. If you had flashed the official 4.3 via Odin, your modem would have changed to a newer one. The one you have is still a 4.2.2 one. Or were you referring to the last stock rom that you loaded with a custom recovery? Also, which recovery are you using?
Try this modem via Odin:
http://d-h.st/Kwv
Install Guide:
Use Odin v3.04
Untick Autoreboot
Flash modem
Reboot once again into Download Mode using (Vol Down plus Home button combi)
Flash Modem once more
Once done,unplug then reboot device manually.
If this doesn't work, try repeating the flash process again while rebooting manually and with auto-reboot option turned off.
Reference thread: http://forum.xda-developers.com/showthread.php?t=2192025
Let's see if that doesn't help anything and go from there.
If you have issues with wifi, there is a wifi fix to be had in the reference thread. Remember to flash that through the Phone slot if needed.
thanks again.
i can't exactly remember what modem i had when i flashed it with the official 4.3 using odin. but my guess would be the XXUBMEA. most of the custom roms i've tried had this modem anyway. some had no problems with 3g signal.
i am using twrp.
i don't want to play around with the modem yet as the 3g and wifi signals are working fine on cyanogenmod. its the call and video that's not working that i want to sort out.
do u think if i reflash by formatting data would clear out the problems i specified earlier? i don't mind trying this if u think it will make a difference.. tthanks.
es0tericcha0s said:
Ok, so there is something odd here. If you had flashed the official 4.3 via Odin, your modem would have changed to a newer one. The one you have is still a 4.2.2 one. Or were you referring to the last stock rom that you loaded with a custom recovery? Also, which recovery are you using?
Try this modem via Odin:
http://d-h.st/Kwv
Install Guide:
Use Odin v3.04
Untick Autoreboot
Flash modem
Reboot once again into Download Mode using (Vol Down plus Home button combi)
Flash Modem once more
Once done,unplug then reboot device manually.
If this doesn't work, try repeating the flash process again while rebooting manually and with auto-reboot option turned off.
Reference thread: http://forum.xda-developers.com/showthread.php?t=2192025
Let's see if that doesn't help anything and go from there.
If you have issues with wifi, there is a wifi fix to be had in the reference thread. Remember to flash that through the Phone slot if needed.
Click to expand...
Click to collapse
Noypi14 said:
thanks again.
i can't exactly remember what modem i had when i flashed it with the official 4.3 using odin. but my guess would be the XXUBMEA. most of the custom roms i've tried had this modem anyway. some had no problems with 3g signal.
i am using twrp.
i don't want to play around with the modem yet as the 3g and wifi signals are working fine on cyanogenmod. its the call and video that's not working that i want to sort out.
do u think if i reflash by formatting data would clear out the problems i specified earlier? i don't mind trying this if u think it will make a difference.. tthanks.
Click to expand...
Click to collapse
The custom roms you've been using don't install a modem with them, so that would be why you've been on the same one for a bit. Often times the stock rom is a little more picky about which modem it likes best, though this varies by phone and update. What call issues are you having? There were so many issues listed for various things on the first post that I had trouble sorting which problem for which rom (not criticizing, just making sure we're on the same page). And as far as videos go, is it just YouTube that isn't working right or any type of video playback? If it is just YouTube - is it force closing, not loading searches or videos, or some other problem?
es0tericcha0s said:
The custom roms you've been using don't install a modem with them, so that would be why you've been on the same one for a bit. Often times the stock rom is a little more picky about which modem it likes best, though this varies by phone and update. What call issues are you having? There were so many issues listed for various things on the first post that I had trouble sorting which problem for which rom (not criticizing, just making sure we're on the same page). And as far as videos go, is it just YouTube that isn't working right or any type of video playback? If it is just YouTube - is it force closing, not loading searches or videos, or some other problem?
Click to expand...
Click to collapse
thanks again for your interest.
the issue about the modem is somehow clear. thanks for clearing that up.
i think it is better to tackle the problems i have in my current setup rather than the previous problems. so, as previously mentioned, i am on cyanogenmod 11 (on 4.4.2). here are some of the problems i am aware of or rather, those that i have experienced:
1. calls - whenever i dial a number, the screen goes black as if the phone is next to my ear (could there be something wrong with the proximity sensor? i haven't done anything to rectify this yet though. when this happens, i can't do anything as the seems to hang although i could see the call timer working. during that call however, i can't hear a sound nor the person i just rang. same thing happens when someone calls me. my phone vibrates (because there is another problem with the sound which i will discuss next) and when i answer it, i hear no sound and the screen goes black and i couldn't do anything with the phone. i have to wait till the caller disconnects before the phone becomes useable again.
i tried calling using viber and the same thing happens.
2. sound - phone is muted even though all the volume controls are midway or almost 100%. i tried changing the ringing tone but i don't hear any sound at all. normally, when i switch to a different ringtone, it should give me a preview of what the chosen sound is like.
3. videos - it doesn't work. when i go to youtube, it opens up the site, opens the selected youtube clip, tries to play it but pauses then tries to play again then pauses until i get a message saying "there was a problem while playing. touch to retry."
so far these are the problems i have faced.
sorry for the long post again.
Hmm. Seems weird that you are having so many issues that most others aren't having, at least not since some of the earlier builds. During the install of CM, did you wipe /system? If not, I definitely would just start fresh. Install the most up to date modem. Wipe everything (system, data, cache, dalvik). Use the most up to date CWM (I like TWRP most of the time, but since CM says you should try CWM before reporting issues, it's one of those things...) Some Samsung proximity sensors aren't that accurate and really don't work well with CM. Other users reported that issue i the main CM thread for your phone, but was definitely not prevalent. I had a Samsung phone that I couldn't use a tempered glass screen protector with as they had an app to install to test to see how sensitive it was and mine didn't pass the test, though it worked for everything else.
As far as the video bug. It affected some earlier builds and other roms based off of CM but I hadn't seen anyone commenting about it for a bit so can't imagine it still being a common issue as that's a deal breaker for most. It might just be easier at this stage to either go back to stable CM 10.2 or try another rom altogether, such as Slim.
es0tericcha0s said:
Hmm. Seems weird that you are having so many issues that most others aren't having, at least not since some of the earlier builds. During the install of CM, did you wipe /system? If not, I definitely would just start fresh. Install the most up to date modem. Wipe everything (system, data, cache, dalvik). Use the most up to date CWM (I like TWRP most of the time, but since CM says you should try CWM before reporting issues, it's one of those things...) Some Samsung proximity sensors aren't that accurate and really don't work well with CM. Other users reported that issue i the main CM thread for your phone, but was definitely not prevalent. I had a Samsung phone that I couldn't use a tempered glass screen protector with as they had an app to install to test to see how sensitive it was and mine didn't pass the test, though it worked for everything else.
As far as the video bug. It affected some earlier builds and other roms based off of CM but I hadn't seen anyone commenting about it for a bit so can't imagine it still being a common issue as that's a deal breaker for most. It might just be easier at this stage to either go back to stable CM 10.2 or try another rom altogether, such as Slim.
Click to expand...
Click to collapse
i know. i don't really want to blame these issues i've mentioned to the rom i am using or have tried. perhaps there was something i did not do or overdid that messed it all up. the cynagenmod 10 (the stable version for my s4 model) had similar issues as the cm11. so i suspect the problem i've created still lingers within my phone that messes up a lot of things.
during installation, i did wipe the system, data, cache and dalvik which i found in the advanced menu.
the thing is, everything else worked fine when i was on 4.2.2 (like the proximity sensors, videos, sounds, etc) so as i said earlier, i don't want to blame it on the roms.
i might have another go on the slim rom tonight but use CWM instead of TWRP.
thanks again for your interest and help
Noypi14 said:
i know. i don't really want to blame these issues i've mentioned to the rom i am using or have tried. perhaps there was something i did not do or overdid that messed it all up. the cynagenmod 10 (the stable version for my s4 model) had similar issues as the cm11. so i suspect the problem i've created still lingers within my phone that messes up a lot of things.
during installation, i did wipe the system, data, cache and dalvik which i found in the advanced menu.
the thing is, everything else worked fine when i was on 4.2.2 (like the proximity sensors, videos, sounds, etc) so as i said earlier, i don't want to blame it on the roms.
i might have another go on the slim rom tonight but use CWM instead of TWRP.
thanks again for your interest and help
Click to expand...
Click to collapse
Do you have a screen protector or anything like that? Sometimes if it isn't laying on the screen right or dirt gets around it, it can cause issues. There's also a way to pop out the actual proximity sensor and clean between the part and the little piece of clear glass on the back of the front piece of glass that can help too if it ends up being hardware related.
es0tericcha0s said:
Do you have a screen protector or anything like that? Sometimes if it isn't laying on the screen right or dirt gets around it, it can cause issues. There's also a way to pop out the actual proximity sensor and clean between the part and the little piece of clear glass on the back of the front piece of glass that can help too if it ends up being hardware related.
Click to expand...
Click to collapse
I put the screen protector when i got the phone and i don't see any visible dirt so i wouldn't want to blame it either. Although i did read about the screen protectors causing problems. But the thing is, even youtube or any videos do not play. Even any sound.
I've tried the slimkat rom by following the developers' instructions and still no youtube, no sound, can't make a call as i can't hear the person i'm calling nor can that person hear me.
Any other suggestions on what to do? I don't mind going back to stock as long as i get all the features back. I went to official 4.3 before but had more severe issues. Or perhaps i did it wrong?
Thanks..
Videos are another issue, but I still think the call problems and such are modem related. What I would do would be to wipe everything, then use Odin to install official Kit Kat, then test this stuff out and see if it works. If so, then you can do a nandroid and redo recovery and try the roms again, then if they still have that issue then your phone just doesn't cooperate with CM roms or something weird like that. If it doesn't work even after official 4.4.2, then there's probably something else going on, possibly hardware related.
es0tericcha0s said:
Videos are another issue, but I still think the call problems and such are modem related. What I would do would be to wipe everything, then use Odin to install official Kit Kat, then test this stuff out and see if it works. If so, then you can do a nandroid and redo recovery and try the roms again, then if they still have that issue then your phone just doesn't cooperate with CM roms or something weird like that. If it doesn't work even after official 4.4.2, then there's probably something else going on, possibly hardware related.
Click to expand...
Click to collapse
Thanks.
Got hold of the official 4.4.2 and flashed it via odin. Failed. But tried again and now working fine. Sound is back, video is back as well as calls. Just the annoying google search failing all the time.
The baseband it has is I9505XXUFNC9. i didn't install any modem in odin though. Just flashed in the pda section the tar file
Now i don't know whether to root this again and try custom roms or leave it as it is. I saw knox by the way but haven't installed it. Or is it pre installed? I have little knowledge about knox
I flashed Iced Bean 4.0 on my xperia sk17i and i think my touch screen died because of it, That rom has aroma installer and there was no my device on that list so i chose xperia pro. Installation was successful but touch screen didnt work. I reverted to stock using flashtools and it still doesnt work. Is there any way to fix this problem? i really need to try something so pleas suggest.
Just to be clear i'm not blaming on anybody, it is total my fault. I'm fully aware of risk installing custom roms so pleas help in any way you can
Thanks in advance
Have you tried to flashing a new kernel which was made for the phone? As far as I know drivers areusually stored within it in Linux / Unix systems so it might apply here for the touch screen as well.
i tried using command fastboot flash boot boot.img and generally did not work. I have unlocked bootloader. I had hard time finding guide to do that for my phone. I did revert to stock using flashtools and ftf file.
When you say fastboot didn't work, do you mean it could not connect to the phone? Where you in fastboot mode when you tried it?
I recently put the 4.4.4 AOPK rom (Link) on my phone and had trouble getting into fastboot to flash the required kernel, I think I solved that by using the flashtool.
If flashing the stock kernel doesn't fix the issue, perhaps using a custom one, which works with ICS, will help?
You can find some here: http://forum.xda-developers.com/showpost.php?p=47407355&postcount=3
-edit-
does this thread help you? [TUT] Fix broken touchscreen problem of xperia mini pro (SK17i,SK17a)
Fastboot worked fine, but any custom kernel after successful flashing didn’t work. I have installed managed to install xperialegacy cm11 it has custom kernel and it didnt fix touch screen. I will try the link you posted. On the side note i bought another sk17 today, yes i love this phone LOL xD
Yess, million times thank you . I made it using this tutorial
here is what you have to do for fix your Bricked touchscreen.
What you need for that is any custom rom with an aroma installer.
1. Flash suitable firmware with Flashtool ( i flashed .587 Because i used Zellycream rom V4 )
2. Then Install any ics Kernel that you like (I installed messa hybrid kernel v4.3 )
3: Then install Any rom that has Aroma installer in it and does support your device, via Cwm recovery (I installed Zellycream V4)
3. While installing the rom choose ST17i in Aroma instead of SK17i
4. Reboot after installation is completed.
5. Wait until phone is On homescree.Nopw touchscreen should work but h/w keyboard not
5. Reboot again into CWM install "keymap_for_pro_XXXX.zip
Link here For Keymap Mini pro
6. Reboot phone again.. Now keyboard and touchscreen should be working. Also options for h/w keyboard should appear now.
Good luck,
It did worked for me hopefully its also going to work for you.
Notice : At first your Touch might not responce how it was before, but give it a time it will work fine after some hours or day or it might never work like before.Mine touch screen worked normally after 8 hours of installing the rom with this method.
Click to expand...
Click to collapse
Now i have questions. Can for some reason touchscreen die again? and also which rom do you recommend for good battery and camera? i like stock but i find it tedious to root and remove all the unwanted apps only to free up a couple of MB and potential screw something
Update: I see that i need to flash a zip which fixes tochscreen. when installing new rom. Is this hardware or software problem?
It would surprise me if the screen died again from the same issue, as the harmful code should have been overwritten by the fix.
I am not a developer though, just a normal user with some basic linux knowledge.
I'd suggest trying out Real ICS. I think I ran it before I got my new phone (I just recently started using the Mini Pro again) and can't remember having any complaints back then.
Other than that you could just go through the rom list. There are some which claim to be focusing on performance, I haven't tried them myself though.
I currently use AOKP kitkat (with some modifications, see this post) but I cannot yet if I'll stick with it. Maybe gonna try out this one http://forum.xda-developers.com/showthread.php?t=2277199 next.
I think im going to stick to the stock for the now. Camera is the best there
I tried swapping motherboard from working sk17i to mine. MB is on stock 2.3 and bt is locked. To my surprises it did not work. Phone boot fine but touch screen does not work. I though this is a software problem, but i guess touch screen device has some controllers or something that were affected too.
Bucov said:
I tried swapping motherboard from working sk17i to mine. MB is on stock 2.3 and bt is locked. To my surprises it did not work. Phone boot fine but touch screen does not work. I though this is a software problem, but i guess touch screen device has some controllers or something that were affected too.
Click to expand...
Click to collapse
I'm confused. Didn't you solve the issue already?
If the damage is permanent, then maybe the touchscreen got damaged by using the wrong rom?
If you really want to have two working phones, you could get a replacent display from ebay. They start at around 30€ these days.