Hi all,
Having a strange issue. After giving my phone in for servicing, Samsung wiped it and put 2.3.6 Gingerbread back on. Naturally, I got a stock 4.0.3 file to flash (XXLPQ at first) and did so (well-versed with all of this). However, ever since that first flash, the phone's been stuck in a bootloop, usually at the "Installing applications" screen, but sometimes just a normal bootloop at splash. I've re-flashed with different stock ROMs, followed the soft-brick guide and flashed the bootloader and kernel, nothing's working. The first flash was clean, but after that I haven't been able to access recovery, only DL mode, so no way to wipe first.
Any thoughts?
Thanks
Change CSC it will wipe your data or XXLSJ with all components(PDA,PHONE,CSC)
Related
i was on comrom 2.1, went into cwm wiped data, cache, factory reset, then restored my stock verizon rom. my reason for doing so, is so that i can sell the phone with it looking as stock as possible without actually getting rid of cwm. so it works fine except for one issue, the custom boot screen (it just says android , except that it is messed up and instead of showing horizontally, it flashes vertically) that was on com rom is somehow stuck flashing over the stock boot screens (samsung galaxy s and the verizon logo), is there an easy fix for this? or should i return everything completely to stock?
Thanks for any help!!
You may have a problem if you were on a voodoo setup and just flashed the stock rom with out removing the lag fix...?
My suggestion is to odin dl09 with the atlas 2.2pit file and repartition checked and reboot when its done,
Then ota update to the one you want.
at this point you can power down and odin the recovery you want but you have to have a non stock kernel ready to go on your sd cause if you don't flash one the first time your in recovery, the stock kernel will overwrite it on boot. In the dev stickies there is a list of roms...you can find a non stock, non voodoo kernel to work with stock rom, flash that on there the first time you boot into recovery to make sure cwm sticks.
Sent from my SCH-I500 using XDA App
Well, this is what happened.
My phone was using cMiui 4.1.2 with the default kernel, and this morning I tried to flash CM7. I wiped everything as always before flashing, after I pushed reboot system and it got stuck in the "Galaxy s2" screen and keeps turning on and off endlessly.
I pulled out the battery, try to get back into recovery, but it hadn't been a successful attempt.
I stayed claim and flash back to stock 4.0.4 via Odin, god-bless I made it through.
I installed a custom kernel and flash to CM9 for temporarily use. Now I don't know what to do.
I really want to try the taste of CM7, please help.
Edit: I also tried various way of flashing, such as flash a codeworkx kernel before flashing, and flash back into GB 2.3.5 before flashing CM7, both didn't work out
it was making me crazy for weeks and here is the solution i found 5 minutes ago :
when it gets bootloop
go to download mod and flash siyah 2.6.14 via odin!
then it boots.
Hi Everyone! just a rookie here in need of a bit of advice.
I'm a Galaxy S II I9100 owner and have my phone rooted and all setup with custom roms and been comfortable with flashing for some time now. My ROM of choice recently was Vanilla Rootbox and have to say the ROM has been fantastic with very few bugs to report. Last night i recieved the OTA update via Goo Manager for Vanilla Rootbox 3.4. I downloaded the full update over wifi and flashed with all wipes no worries. Next step was to flash the latest GAPPS and i figured there would be nothing wrong with flashing the GAPPS zip i had on my sd card that i had downloaded the last time i was notified of a GAPPS update via Goo manager as well. After flashing, wiping everything and rebooting again. My phone then booted up to a series of dialog boxes indicating that many google processes had stopped functioning. apps.google.com etc etc. A similar error has been reported in the Vanilla Rootbox thread by another user but i wasnt able to report this bug their either because my post count is too low to post in a development forum. So after seeing this error i rebooted into recovery to flash my last backup but CWM recovery came back with an error messaging stating it couldnt mount either ext or int sdcard. i did a factory reset which made no difference to the problem whatsoever. I then downloaded ODIN and the latest stock ICS Rom and flashed it via ODIN with no reported errors. My phone now boots through the optus boot animation and is stuck at the Galaxy S 2 screen with the flashing red and yellow animation over the S. If i turn off the phone with the power button, the phone turns off and immediately starts again and gets stuck at the flashing s screen. I've taken the battery sim and ext sd card out and put it all back in only for the problem to persist.
If anyone could help me there's a donation and my thanks in it!
Much appreciated
Nick
tried to re flash another stock ROM?
If so, tried factory reset the phone after the flash?
As long as you can get to DL mode, you are good to keep on flashing till you are up & running.
And then you got this
Remember to update your kies and make sure you close it all up before flashing with odin. If you are in 4.0.4 beware of the brick bug.
gastonw said:
tried to re flash another stock ROM?
If so, tried factory reset the phone after the flash?
As long as you can get to DL mode, you are good to keep on flashing till you are up & running.
And then you got this
Remember to update your kies and make sure you close it all up before flashing with odin. If you are in 4.0.4 beware of the brick bug.
Click to expand...
Click to collapse
Kies has never been installed on this computer but i did use the usb drivers mentioned in the soft brick recovery guide you linked. I used some information from the guide to flash this stock rom but i couldnt flash or wipe the partition because im unsure where to get the .PIT file required? i cant get past the boot animation so no factory reset possible and yes i can still get into download mode!
darkstar117 said:
Kies has never been installed on this computer but i did use the usb drivers mentioned in the soft brick recovery guide you linked. I used some information from the guide to flash this stock rom but i couldnt flash or wipe the partition because im unsure where to get the .PIT file required? i cant get past the boot animation so no factory reset possible and yes i can still get into download mode!
Click to expand...
Click to collapse
wow wow, leave pit files alone for now, they are nasty.
What stock ROM did you flash? 4.0.4 or 4.0.3?
You can factory reset via recovery mode.
Try installing kies anyway, it can't never hurt. Just make sure all applications are closed before you re-flash.
here's jb leak, might help:
http://www.sammobile.com/2012/11/15/i9100xxlsj-%E2%80%93-galaxy-s-ii-android-4-1-2-jelly-bean-test-firmware/
Right so i flashed I9100XWLP8 stock rom (4.0.3). Just then i flashed Siyah Kernel and attempted to use the factory reset function in recovery there, i get a message down the bottom mentioning that it can't mount my internal SD.
darkstar117 said:
Right so i flashed I9100XWLP8 stock rom (4.0.3). Just then i flashed Siyah Kernel and attempted to use the factory reset function in recovery there, i get a message down the bottom mentioning that it can't mount my internal SD.
Click to expand...
Click to collapse
Tell me your:
Model
Firmware
Country
Carrier
Always mention this
try flashing jb leak (ROM, modem & kernel package).
So I've been on CM9 since October, everything has been all well and good! Today I decided I wanted to flash a unbranded GS2 ICS ROM onto my phone so I could then update via KIES to the new JellyBean one. But now my phone will not go past the boot logo since I flashed I9100XWLPT via ODIN in the PDA section just as the guide told me. The boot logo moves but will not go past it. I have flashed a new kernel, I then tried Syiah Kernel. Now I've reflashed Cyanogen mod 9 via CWM and it is doing the same thing. The boot animation just moves forever. Can anyone help?
yes flash jb straight up.
Sent from the little guy
Wipe data/cache and dalvik-cache then re-flash a JB ROM (since you want to use Jelly bean) via Odin. You can get JB Roms from here
I've wiped all caches then flashed the JB SII ROM and still the same problem, it boots up to the samsung logo then just replays it over and over again without getting into the phone
And factory reset does nothing?
Flash this. See how you do.
PS: Flash only CODE, PHONE and CSC.
Hello
I recently recieved my sisters old galaxy s2 after it had been water damaged and the only problem was the power button not functioning.
I wanted to flash a stock 4.1.2 rom via odin and since this was my first time flashing an S2 I followed a tutorial showing me how to flash a stock rom.
Everything went well during the flash but after it completed it bootlooped forever and ever. I tried flashing the same ROM again and the same bootloop. I also tried other ROMs and nothing worked. People have fixed their odin bootloops by entering recovery and wiping everything but I just don't know how to enter recovery without a power button.
Any suggestions?