[Q] Question with ADB push .zip - Asus Eee Pad Transformer Prime

Hello all, So I went to flash a rom through CWM and something went wrong.. long story short it ended up being wiped in fastboot, and loosing my backup in cwm. I AM able to get into my CWM recovery and fastboot. CWM shows "no files found" when I go into install .zip from sdcard. Ive spend the last few nights trying to push a rom .zip via ADB to install in CWM, and here is my problem. Ive have done my research, have ADB running correctly, my device shows up as serial # and recovery in adb, ive placed my the rom .zip in C:/SDK/platform-tools and renamed it simply "prime.zip". When I open my command prompt from platform-tools and put in "adb push prime.zip/sdcard" I simply get a list of the adb commands.No file push progress or anything. I have searched for an answer and not found much, I apologize if the answer is simple and ive missed it in my searching. Thanks for any help you can give me!!

mxrider657 said:
Hello all, So I went to flash a rom through CWM and something went wrong.. long story short it ended up being wiped in fastboot, and loosing my backup in cwm. I AM able to get into my CWM recovery and fastboot. CWM shows "no files found" when I go into install .zip from sdcard. Ive spend the last few nights trying to push a rom .zip via ADB to install in CWM, and here is my problem. Ive have done my research, have ADB running correctly, my device shows up as serial # and recovery in adb, ive placed my the rom .zip in C:/SDK/platform-tools and renamed it simply "prime.zip". When I open my command prompt from platform-tools and put in "adb push prime.zip/sdcard" I simply get a list of the adb commands.No file push progress or anything. I have searched for an answer and not found much, I apologize if the answer is simple and ive missed it in my searching. Thanks for any help you can give me!!
Click to expand...
Click to collapse
Use
adb push prime.zip /sdcard/prime.zip
You shouldn't use CWM - use TWRP instead, because CWM has many problems on TFP and isn't compatible with JB bootloader.
Sent from my LT30p using Tapatalk 2

Related

[Q] stock/clockwork mod Recovery question

I had a mt3g and was always able to get to recovery manually. I recently bought a vibrant, rooted using adb, installed clockwork mod recovery, and did a nandroid. I am unable to get recovery manually. Ive tried every combo of vol^ volv that I could find on these posts. Im ready to start having fun, but am worried for this reason. Any help would be appreciated. Heres my question.
If I start flashing, and my phone gets stuck (vibrant screen, galaxy screen, bootloop, etc.), is there any way I can get recovery without having to do it manually? Would I be able to reboot recovery with adb without mounting? Is there's any other way?
Also, if there is a way, how do I get into clockwork mod recovery so I can restore with nadroid? Would I have to have clockworkmod update zip on my sd and reinstall packages thru stock recovery first? Thank you for any help. Im lost!
make sure you have your clockwork recovery on the root of the internal memory and have it named update.zip
open terminal or command prompt and type adb shell. you will get $ type su to get # type reboot recovery then when in samsung recovery select reinstall packages and you will be in clockwork.
Ok, so I can do this on the computer even though the phone can't be mounted? It will recognize the devise and reboot anyway? Sorry, I'm new to adb.

Cant get commands to work.

Post my issue yesterday the thread was named bootloop from hell. I am trying to use fastboot to flash a new recovery so i can wipe everything since someone said the problem was from my old recovery. I have all the sdk tools installed and the paths set for the commands. but every command i run it says is not specified. Im hoping someone can help me get this goin so i can actually intiate an adb session.
I am on hboot 1.4 soff but i have no recovery now since i flashed the pg86img but it falied to unzip the system step. Someone also told me to use cwm instead of twrp but i cant find the zip all of them are disk images. If i can find the zip to rename pg86img and go into recovery and run virus wipe tool im hoping that will work to avoid fastboot. any help is much appreciated thanks in advance.
Get the files fastboot and the adb in one folder an name the folder 3vorootnew
Then go to cmd an type cd\3vorootnew
Then type fast boot or adb comand
Sent from my PG86100 using XDA App

Accidently wiped internal storage

So I dont have my nanadroid backup...thats not my concern because i can just flash the stock rom...but anyways i dont have an os installed i have twrp recovery...im tryin to adb sideload the rom.zip so i can then flash the rom. Could someone please enlighten me how to do this or a detailed tutorial ive searched but im having no luck thanks in advance!!!
2phonejones said:
So I dont have my nanadroid backup...thats not my concern because i can just flash the stock rom...but anyways i dont have an os installed i have twrp recovery...im tryin to adb sideload the rom.zip so i can then flash the rom. Could someone please enlighten me how to do this or a detailed tutorial ive searched but im having no luck thanks in advance!!!
Click to expand...
Click to collapse
If never gotten sideload to work, but you can try adb push. this is where I learned it http://forum.xda-developers.com/showthread.php?t=1667929
joshyy_rey said:
If never gotten sideload to work, but you can try adb push. this is where I learned it http://forum.xda-developers.com/showthread.php?t=1667929
Click to expand...
Click to collapse
It working as far as connecting to fastboot but when i goto recovery like the tutorial states and then goto mount and run the commands it doesnt push the file even though it says device is being read.
joshyy_rey said:
If never gotten sideload to work, but you can try adb push. this is where I learned it http://forum.xda-developers.com/showthread.php?t=1667929
Click to expand...
Click to collapse
Im using twrp btw idk if that is the issue but if so do you know how i can flash the cwm recovery or is that not possible urrghhh im so close i just have to get this adb to push the file!
if you have an OTG cable you can load from a USB stick..Just mount OTG
2phonejones said:
Im using twrp btw idk if that is the issue but if so do you know how i can flash the cwm recovery or is that not possible urrghhh im so close i just have to get this adb to push the file!
Click to expand...
Click to collapse
You can flash cwm through adb. Adb might be buggy through recovery it was at first. I'd post on the twrp thread to see if a someone has an idea
Sent from my HTC One using xda premium
I had this problem myself today and started freaking out. After a brief 15 second panic attack I realized I could side load. I have twrp and sideloaded very easily.
I used the all in on toolkit listed in the android dev section and cleanrom 1.5. I put cleanrom on my desktop and renamed it to Rom.zip. I started the aio tool which has a button for sideloading a Rom. Boot the phone into recovery and plug it into your pc. (I am assuming you have the HTC drivers installed) From TWRP click on advance and the adb sideload. Then click the side load button on the aio tool. This will attempt to reboot your phone first but since you're already there just close the command prompt that comes up. A new window will come up for you to chose the zip. Navigate to your desktop and pick the zip you put on the desktop (longer paths seem to cause issue with sideloading). Then it will push the zip to your phone. The command prompt on your pc will have a percentage progress. Once done just flash that zip like normal.
I had to reboot my phone using the volume down power button method before I could get back to twrp and the install froze once in Aroma. But I just flashed it again and it worked. Once I got it back I just put my backup back on the phone, booted back to twrp, and restored my backup.
Sorry if this seems unorganized, had two toddlers crawling all over me while. typing. Using the AIO should work
AIO found herehttp://forum.xda-developers.com/showthread.php?t=2242635
Sent from my HTC One using xda app-developers app

[HELP] unlocked bootloader, rooted, and stuck on recovery!

Hello
i managed to unlock my bootloader, flashed twrp recovery, flashed super user.
Tried to install dirty unicorn and got status 7 error.
And now i dont have a rom/os installed.
I tried to move over .zip files through twrp but cant mount drives.
Any help?!?
I TRIED TO PUSH ZIP WITH SIDELOAD AND NO LUCK
BUMP!
i really need to get this fixed please help
xr1charxx said:
BUMP!
i really need to get this fixed please help
Click to expand...
Click to collapse
I did the same thing yesterday, as it was my first time using TWRP (always been a CWM guy), All you have to do to fix it is go into advanced and go into adb sideload, put your rom in you adb folder and run this command
adb sideload nameofzip.zip
Then the zip will be placed in internal storage named sideload.zip and you can flash it.
dsf767 said:
I did the same thing yesterday, as it was my first time using TWRP (always been a CWM guy), All you have to do to fix it is go into advanced and go into adb sideload, put your rom in you adb folder and run this command
adb sideload nameofzip.zip
Then the zip will be placed in internal storage named sideload.zip and you can flash it.
Click to expand...
Click to collapse
Already tried this. when i run adb devices my device does not show up. and when i try to sideload any files i get error:closed
xr1charxx said:
Already tried this. when i run adb devices my device does not show up. and when i try to sideload any files i get error:closed
Click to expand...
Click to collapse
I would try to plug in the USB after your already in recovery.
If you cant get that to work you can always buy this:
https://shopmeenova.appspot.com/st/order.html
its a microusb to microsd its a good worst case and will get you up and running.
do you still have the rom that errored out on you on your internal storage? if so you can always try a fresh wipe and try to install again.

Phone can not boot after changing vold.fstab

Recently I rooted and changed my vold.fstab in a hope of bigger phone storage and then all I got after reboot is a logo.
I using Philips w6610.
I have original vold.fstab file
My phone rooted, and have recovery
My phone don't have usb debug
I tried to make an update.zip but maybe I did not know how to do it right
Now I can't not do anything and through the search on google nothing can help too.
Thank in advance
Update, The update.zip always endup with installation aborted . adb shell commend end up with closed line
Pls helppppppppp ( I just used my phone for 2 weeks
OMG nobody care!
The only two things that pop to mind, are an update.zip (like you already tried) or trying to access 'adb shell' in recovery. Though in the last case you probably need to mount stuff manually, or via the UI of the recovery to get to the vold.fstab file and revert it back.
Can you flash your firmware
The only two things that pop to mind, are an update.zip (like you already tried) or trying to access 'adb shell' in recovery. Though in the last case you probably need to mount stuff manually, or via the UI of the recovery to get to the vold.fstab file and revert it back.
Click to expand...
Click to collapse
Update.zip will be aborted in the first step. I got an installation aborted everytime I update via sdcard.
I also tried adb shell and get command: closed . adb sideload update.zip return same thing with update via sdcard
Can you flash your firmware
Click to expand...
Click to collapse
I really don't know how to flash it right way.
I got and cook ROM from a russian forum for my phone. Only tried to update through sdcard and adb sideload
I am able to get into fastboot but I can not do anything with it!
Is there any methods I can do ?

Categories

Resources