Related
Every time I plug the TF to the tv I lose about half an inch on all sides. Don't see any hdmi settings and I tried messing with the tv settings. Anyone know how I can get it to fit properly
cyi1 said:
Every time I plug the TF to the tv I lose about half an inch on all sides. Don't see any hdmi settings and I tried messing with the tv settings. Anyone know how I can get it to fit properly
Click to expand...
Click to collapse
Have you tried going through an a/v receiver using the hdmi inputs on it? If so, are the results better or worse?
I found nothing in the manual other than the mention of the micro hdmi port out.
What model is your TV?
What you are describing sounds like Overscan, not sure on the size of your TV but my TV has some Overscan depending on the source.
My Prime has not arrived yet, sorry I cannot help you further.
yea happened to me too, I ended up fixing it by changing some scan settings in my TV
Change your TV settings from HDTV to PC mode or something similar to that. I did that On my Philips 1080P LCD and its working perfectly now. Strange because my Samsung automatically adjusted for my tablet.
If you dont have a PC to HDTV setting then just mess around with the settings/ features. Most models have things to help you get the best display possible for your situation.
I did a search here. I have the Prime and had great success from 12/28/11 until ICS update around 01/10/12 but since then my TV shows no signal and this lasts for several minutes so the TV has had time to communicate with the tablet.
1. I have done a Factory Reset
2. I have tried all 4 HDMI ports on the TV
3. I have tried a second TV
4. I have ordered and tried a second cable (stranger things have happened)
5. I have called Asus Customer Support
My options are of course RMA but that means no tablet for 10-14 business days or wait to see if and when an ICS update may correct this issue for me.
Am I just out of luck here and just need to give up my Prime for 2-3 weeks or do you think that an ICS update maybe on the horizon and may correct my issue?
I don't think it is an ICS issue. My conection between the prime and the tv works perfectly. BUT it does seem to take about 15 seconds before anything shoes up on the tv after I plug the cable into the prime.
aahz123 said:
I don't think it is an ICS issue. My conection between the prime and the tv works perfectly. BUT it does seem to take about 15 seconds before anything shoes up on the tv after I plug the cable into the prime.
Click to expand...
Click to collapse
Thanks for your reply. I just went back and edited my post to add that I leave it plugged in for longer than a couple of minutes. I even flip between HDMI channels using the TV remote while the Prime is plugged in. The TV just never sees it!
Mickeylittle said:
Thanks for your reply. I just went back and edited my post to add that I leave it plugged in for longer than a couple of minutes. I even flip between HDMI channels using the TV remote while the Prime is plugged in. The TV just never sees it!
Click to expand...
Click to collapse
Did you double check with another HDMI cable? Some cables of lower quality do prevent the Prime and the TV from synchronizing.
I paid $39 for Rocketfish 8' micro HDMI cable from Best Buy yesterday and attached it to the available HDMI port on the back of my 25" I-Inc monitor. My Transformer Prime didn't see that I had the HDMI cable connected until after I shut it down and restarted it, only after doing that the bootup screen appeared on my monitor and Prime and when I logged in the Prime had the HDMI logo displayed on the tray.
The problem I'm experiencing now is stability. I get constant screen flickering from the monitor when I'm viewing the Prime through the HDMI connection. It seems like its software. I have no other devices to test this out on besides my monitor as the HDMI on my HDTV is only capable of receiving 1080i.
Another sign that it seems like software that's causing the flickering is that I notice considerable lag from the mousepad cursor using the Dock when my monitor is flickering from viewing the Prime over HDMI.
the_game_master said:
I paid $39 for Rocketfish 8' micro HDMI cable from Best Buy yesterday and attached it to the available HDMI port on the back of my 25" I-Inc monitor. My Transformer Prime didn't see that I had the HDMI cable connected until after I shut it down and restarted it, only after doing that the bootup screen appeared on my monitor and Prime and when I logged in the Prime had the HDMI logo displayed on the tray.
The problem I'm experiencing now is stability. I get constant screen flickering from the monitor when I'm viewing the Prime through the HDMI connection. It seems like its software. I have no other devices to test this out on besides my monitor as the HDMI on my HDTV is only capable of receiving 1080i.
Another sign that it seems like software that's causing the flickering is that I notice considerable lag from the mousepad cursor using the Dock when my monitor is flickering from viewing the Prime over HDMI.
Click to expand...
Click to collapse
the_game_master said:
I paid $39 for Rocketfish 8' micro HDMI cable from Best Buy yesterday and attached it to the available HDMI port on the back of my 25" I-Inc monitor. My Transformer Prime didn't see that I had the HDMI cable connected until after I shut it down and restarted it, only after doing that the bootup screen appeared on my monitor and Prime and when I logged in the Prime had the HDMI logo displayed on the tray.
The problem I'm experiencing now is stability. I get constant screen flickering from the monitor when I'm viewing the Prime through the HDMI connection. It seems like its software. I have no other devices to test this out on besides my monitor as the HDMI on my HDTV is only capable of receiving 1080i.
Another sign that it seems like software that's causing the flickering is that I notice considerable lag from the mousepad cursor using the Dock when my monitor is flickering from viewing the Prime over HDMI.
Click to expand...
Click to collapse
I haven't noticed any flickering but I have only watched real steel ones mine so far. Was a 1080p mkv file and I hooked it up through my receiver. The tv is 46" so I think I would have noticed. Have you tried other files? Oh, and I use a 6' cable is bought from monoprice for like $5
rand4ll said:
I haven't noticed any flickering but I have only watched real steel ones mine so far. Was a 1080p mkv file and I hooked it up through my receiver. The tv is 46" so I think I would have noticed. Have you tried other files? Oh, and I use a 6' cable is bought from monoprice for like $5
Click to expand...
Click to collapse
I get screen flickering (or better description screen blinking) immediately after connecting HDMI to it.
I can be just viewing the Prime's desktop not playing back any video and my Monitor displaying the Prime over HDMI will blink by going complete dark and it will continue to do this randomly and frequently.
When playing back video it continues to do this and not only is it losing the picture it's also losing audio in this screen blinking problem.
---------- Post added at 05:39 AM ---------- Previous post was at 05:10 AM ----------
I just tried the HDMI input on my BenQ monitor and I get a stable connection, no blinking.
Only difference is that my BenQ monitor has no built-in speakers and it's not a 1080p monitor it's a 1680x1050 res monitor. So I'm getting an improper viewing aspect ratio.
Is there a way to turn off the audio from outputing through HDMI and keep it coming from the Prime?
Turns out my TFP works fine connected to my old Samsung 30" HDTV CRT over HDMI, I didn't try it at first because I thought the the TFP would try to output 1080p to the set which can only handle 1080i.
I'm surprised that it connected instantly to my HDTV, now I need to correct my TV's left and right fields in the service menu as it is zoomed too far in.
Does anyone know if the TFP have a 16:9 or 16:10 aspect ratio? I'll have to keep this in mind when adjusting the settings cause I want to maintain a 16:9 setting on the HDTV.
Kashban said:
Did you double check with another HDMI cable? Some cables of lower quality do prevent the Prime and the TV from synchronizing.
Click to expand...
Click to collapse
Yes sir in my original post I state that I bought a 2nd cable. Also since it was working fine before ICS and with all the things I have tried in my post it is either ICS or the port on my Prime. Or yeah somehow I got 2 faulty cables and 1 of them worked great until the update!
No I just hope it is ICS for me.
the_game_master said:
I paid $39 for Rocketfish 8' micro HDMI cable from Best Buy yesterday and attached it to the available HDMI port on the back of my 25" I-Inc monitor. My Transformer Prime didn't see that I had the HDMI cable connected until after I shut it down and restarted it, only after doing that the bootup screen appeared on my monitor and Prime and when I logged in the Prime had the HDMI logo displayed on the tray.
The problem I'm experiencing now is stability. I get constant screen flickering from the monitor when I'm viewing the Prime through the HDMI connection. It seems like its software. I have no other devices to test this out on besides my monitor as the HDMI on my HDTV is only capable of receiving 1080i.
Another sign that it seems like software that's causing the flickering is that I notice considerable lag from the mousepad cursor using the Dock when my monitor is flickering from viewing the Prime over HDMI.
Click to expand...
Click to collapse
Thanks, I tried shutting the Prime down and restarting while the HDMI cable was plugged into the TV but no dice for me.
My HDMI was working and I have watched several movies on my TV previously.
Fast forward a few weeks and HDMI no longer works! I bought a cheap cable on Amazon, and noticed the micro connection was very loose. The HDMI notification no longer shows up. I ordered a 'real' cable from mono price, but still no luck.
No picture and no HDMI notification - arrgh.
The TP HDMI connection seems very loose, even with the new cable. Looks like an RMA for me.
Sent from my Transformer Prime TF201 using Tapatalk
clenz said:
My HDMI was working and I have watched several movies on my TV previously.
Fast forward a few weeks and HDMI no longer works! I bought a cheap cable on Amazon, and noticed the micro connection was very loose. The HDMI notification no longer shows up. I ordered a 'real' cable from mono price, but still no luck.
No picture and no HDMI notification - arrgh.
The TP HDMI connection seems very loose, even with the new cable. Looks like an RMA for me.
Sent from my Transformer Prime TF201 using Tapatalk
Click to expand...
Click to collapse
That's what I'm thinking too. It's not real loose but it does have wiggle room that I didn't notice before! I hate it because I'll be without it for 2-3 weeks and everything else with the tablet works great!
So basically when I enable HDMI out to my 2560x1440 screen (u2711), the motorola logo displays just fine, but when I select a mode like gallery or mirror, the whole HDMI screen starts flickering and showing portions of the screen every couple of seconds.
The phone itself works just fine, and HDMI out with the same cable works fine on my HD ready TV. The HDMI port on my u2711 is fine as well, at least it works with my xbox 360 in 1080P without error.
The odd thing is, as soon as I enable Picture by Picture on my screen, the phone displays just fine on it's half of the screen, albeit in 640x480.
Is this a known bug, or does anyone have any suggestions on fixing it? Do I have to disable DDC/CI? My cable has ethernet capabilities, so the high res shouldn't be the problem, right? Or did I just buy a ****ty/faulty cable.
I don't think the phone is capable of rendering at a resolution that high, the gallery is in 3D-mode and it's probably running out of Vram..
Maybe force it to 1080p somehow?
I never got the HDMI cable working from my pc high end gfx card to my dell u3011 . Never tried from my Razr but I guess the same applies to it.
Only dual DVI and DisplayPort worked.
Without checking I think the highest res possible on hdmi is 1200p ?
I would always try a different cable before giving up. 9/10 times when I have seen flickering on an HD display it has been a crap/faulty cable, and I have seen it a lot as until recently I was Digital TV installer. Used to carry loads of spare cables in the van as it used to happen so often. You don't have to spend loads on a cable but the very cheapest are usually best steered clear of unless you're lucky. I'd usually go for a £10-£15 cable (15-20 EUR) and not a cheap ebay one.
Thanks for your advice guys!
The max res for 1.4 is 4096×2160, and for 1.3 it's 2560x1600, so my resolution should be fine I think.
I paid ~20 euros for the cable, it's brandless, but from a well known cable retailer here. I don't have any others to test, and compatibility with my u2711 isn't vital to me, so I'm not going to buy another cable, but I still think it's odd that it doesn't work.
I will report back if I find another cable and it makes a difference!
Hey guys and gals,
Although I've been lurking on these forums for a few weeks I've finally decided to join and ask some questions.
I've completed my S3 PC, got a nice monitor with HDMI input, bluetooth keyboard and mouse and of course the MHL adapter. Everything works great.. time to get rid of the ageing PC in my office.
I have a question though, I've connected the S3 to my TV and the new monitor and I never get a 1080p connection.. it's always 1080i
Is there any way to force 1080p as I do get a slight flicker with 1080i
I'm totally amazed at what the S3 can do! BTW I was a total apple fanboy until I got my S3 a few weeks ago.
Cheers in advance... and yes I searched
so nobody else is having this issue?? I was really hoping to get some help here Anyone??
Sure your monitor supports 1080p? What hz does it run when using 1080i?
Sent from my GT-I9300 using xda premium
It doest output 1080p via hdmi just 1080i iv tested on all my tv sets and there are all top line and display tbe same i dont get any flicker tho are you using a good hdmi cable?
Sent from my GT-I9300 using xda app-developers app
thanks for confirming snowwhite007... I honestly thought it was able to output 1080p. I guess the slight flicker is due to the monitor then.
Flickering may also be due to the phone's HDMI chip. I'm not sure if it's clock source and other components are stable enough for a clean transmission of 31'104'000 (31,1million) pixels per second (1920 width*1080 height*30 images/second / 2 (interleaved) )
1080i and 1080p have the same native resolution of 1920x1080 pixels with the only difference being that "i" (interlaced) paints odd lines before even in 2 'ticks' while "p" (progressive) paints in one go from top to bottom.
So if there is any flickering it SHOULD only be every other line, can you confirm that?
Hi, i've got a question, can anyone give me a tip which keyboard and mouse works best with the s3?
I want to do exactly what you did. I want to use my phone as a pc.
So any Idea?
I bought a cheap bluetooth keyboard an mouse from Deal Extreme worka great
Sent from my GT-I9300 using xda app-developers app
Might sound like a silly thing, but just check your power saving isn't enabled, found that while it is enabled stuff like 1080 vids played really badly. That and what type of hdmi cable you are using could be factors.
I went on hols for two weeks and just took my S3 and a portable hard drive with hdmi and usb adapters and cables and used the hotels 1080p tvs as a full desktop, ubuntu and all
I am pretty positive that everytime I have used the hdmi it has been at 1080p. My guess is maybe a tv error unless it has run 1080p before?
EDIT: Oooh, just had another thought, what exact hdmi adapter did you use? Link included if that's not against forum rules? Know when I got mine I had to wade thru a lot of close immitations that don't display properly as they are cheap fakes sold as the real thing, one would only display 720p
can you tellme the model of bluetooth keyboard and mouse? i wanna do the same
haffid said:
can you tellme the model of bluetooth keyboard and mouse? i wanna do the same
Click to expand...
Click to collapse
I bought a generic mini bluetooth keyboard from amazon marketplace, it's not the bees knees but its about the size of the phone, bluetooth, rechargeable and only £10.
Works great for using the terminal or typing complex passwords etc when traveling or using as a desktop.
Also used the microsoft notebook bluetooth mouse 5000, got that cheap through amazon marketplace too.
Neither come with bluetooth adapters though so would need to by one seperately if ever using with a pc that doesn't have built in bluetooth.
1080i
Hi
I recently purchased MHL adapter from this website
http://www.clove.co.uk/samsung-galaxy-s3-mhlhdmi-adaptor
And I have same problem as you. My TV only gets 1080i not 1080p.
However I don't get flickering, I just see that there is not enough vertical pixels (visible difference)
Tried bunch of different hdmi cables (cables that work with various 1080p devices with no issues whatsoever) and I always get 1080i.
Even when I try to playback video which is 1080p.
I'll try later if there is any difference if I plug it in through AMP (onkyo) and not the tv and let you know if there is any difference.
Cheers
pugger said:
Hey guys and gals,
Although I've been lurking on these forums for a few weeks I've finally decided to join and ask some questions.
I've completed my S3 PC, got a nice monitor with HDMI input, bluetooth keyboard and mouse and of course the MHL adapter. Everything works great.. time to get rid of the ageing PC in my office.
I have a question though, I've connected the S3 to my TV and the new monitor and I never get a 1080p connection.. it's always 1080i
Is there any way to force 1080p as I do get a slight flicker with 1080i
I'm totally amazed at what the S3 can do! BTW I was a total apple fanboy until I got my S3 a few weeks ago.
Cheers in advance... and yes I searched
Click to expand...
Click to collapse
Hi. Has anyone tried using a USB C-to-HDMI cable to connect Mate 10 to a monitor. How do you like it? Do apps scale well on monitor? Assuming you hooked up a bluetooth keyboard and mouse, have you tried editing a document? Thanks!
still waiting for my Mate 10! But one of the reasons for getting one is USB-C to HDMI. One thing I noted when sourcing a cable - if you use a "standard" cable you won't be able to stream Netflix/Amazon streaming due to lack of "HDCP" compliance. I got a cable that was compliant for a few euro more on Amazon. Just keep this in mind if you want to stream Netflix etc.
Does anyone know if this would work with a Surface Pro 4? The SP4 has a mini display port, so maybe with a mini display port adapter, we can connect Mate 10 to the SP4 and view desktop mode on the tablet. Would that work?
podgeandrodge said:
still waiting for my Mate 10! But one of the reasons for getting one is USB-C to HDMI. One thing I noted when sourcing a cable - if you use a "standard" cable you won't be able to stream Netflix/Amazon streaming due to lack of "HDCP" compliance. I got a cable that was compliant for a few euro more on Amazon. Just keep this in mind if you want to stream Netflix etc.
Click to expand...
Click to collapse
So how and where to buy a cable to bypass this restriction, I am trying to play xfinity app and it tells me there is a restriction OMG wth it becoming Apple this android
rjan22 said:
So how and where to buy a cable to bypass this restriction, I am trying to play xfinity app and it tells me there is a restriction OMG wth it becoming Apple this android
Click to expand...
Click to collapse
Well the cable I have purchased is the one linked below - which the manufacturer says (elsewhere) is the HDCP compliant one. I can't guarantee you that it will work though!
I am expecting my phone and this cable this week so will try out!
https://www.amazon.co.uk/gp/product/B06XS7T4GP
NOTE - this manufacturer also sells usb-c to hdmi cables that it says are NOT compliant. Only one above is one they say is compliant.
podgeandrodge said:
Well the cable I have purchased is the one linked below - which the manufacturer says (elsewhere) is the HDCP compliant one. I can't guarantee you that it will work though!
I am expecting my phone and this cable this week so will try out!
https://www.amazon.co.uk/gp/product/B06XS7T4GP
NOTE - this manufacturer also sells usb-c to hdmi cables that it says are NOT compliant. Only one above is one they say is compliant.
Click to expand...
Click to collapse
Thanks I'll look for it here in Amazon US, no problem returning so might as well try.
I tried it out briefly when I got the phone.
I used a type c to HDMI adapter, with a normal HDMI cable.
Some things I noticed:
I think this drained the battery more than anything else I've done with the phone (including gaming).
The phone was noticeable warm after the session.
My phone rebooted shortly after the desktop session. Like it crashed.
The phone states it's in reverse charge mode, like juice is also bring drained from the phone to the TV.
I couldn't get YouTube to work full screen without borders. Unless I was mirroring the phone screen (which means phone screen also remains on).
I've mixed feelings, it's early days I guess.
Ok, I am still waiting for the cable from Amazon but ended up purchasing an adaptor from Maplin.
Worked fine - as in outputted screen of phone (in phone or 'desktop' mode).
But I did notice that the screen resolution as outputted was far less than the resolution of the screen - I would have expected the 1080p display to mirror across to the TV.
It wasn't that it was bad, just blurry text and not crisp when looking at video. Whereas in the past, with a phone with an actual hdmi connection as opposed to usb-c, or indeed when outputting a media player with hdmi or casting using chromecast, the quality is perfect.
Perhaps I'm doing something wrong or perhaps the Maplin cable is not up to speed. Open to ideas.
podgeandrodge said:
Ok, I am still waiting for the cable from Amazon but ended up purchasing an adaptor from Maplin.
Worked fine - as in outputted screen of phone (in phone or 'desktop' mode).
But I did notice that the screen resolution as outputted was far less than the resolution of the screen - I would have expected the 1080p display to mirror across to the TV.
It wasn't that it was bad, just blurry text and not crisp when looking at video. Whereas in the past, with a phone with an actual hdmi connection as opposed to usb-c, or indeed when outputting a media player with hdmi or casting using chromecast, the quality is perfect.
Perhaps I'm doing something wrong or perhaps the Maplin cable is not up to speed. Open to ideas.
Click to expand...
Click to collapse
Interesting. Sounds like you are using Mate 10 Pro. Wonder if resolution is improved using Mate 10.
Jamdonut said:
I tried it out briefly when I got the phone.
I used a type c to HDMI adapter, with a normal HDMI cable.
Some things I noticed:
I think this drained the battery more than anything else I've done with the phone (including gaming).
The phone was noticeable warm after the session.
My phone rebooted shortly after the desktop session. Like it crashed.
The phone states it's in reverse charge mode, like juice is also bring drained from the phone to the TV.
I couldn't get YouTube to work full screen without borders. Unless I was mirroring the phone screen (which means phone screen also remains on).
I've mixed feelings, it's early days I guess.
Click to expand...
Click to collapse
I was wondering about the battery drainage. Some cables I've seen have an additional input for charger. Maybe that might help
mscion said:
Interesting. Sounds like you are using Mate 10 Pro. Wonder if resolution is improved using Mate 10.
Click to expand...
Click to collapse
No, normal Mate 10.
Other cable arrived and same situation. To clarify, it's fine, and perfectly watchable, just not crystal clear. It strikes me that this method seems like the usb-c to hdmi cable is simply mirroring the display of the phone rather than actually outputting the video file itself independently - as would happen with a HDMI connection as you used to get on some phones. Perhaps this is something to do with the issue.
podgeandrodge said:
No, normal Mate 10.
Other cable arrived and same situation. To clarify, it's fine, and perfectly watchable, just not crystal clear. It strikes me that this method seems like the usb-c to hdmi cable is simply mirroring the display of the phone rather than actually outputting the video file itself independently - as would happen with a HDMI connection as you used to get on some phones. Perhaps this is something to do with the issue.
Click to expand...
Click to collapse
......hope you post result of amazon cable! have a nice day!
It was amazon cable I referred to above. So same with maplin adaptor and amazon cable. Tried outputting a HD YouTube video but not much different. As I say, fine, but not as clear as would expect if you copied that file to a media player attached to a tv via hdmi
Hooked mine up with the Huawei supercharger and cable and it slowly drains the battery in desktop mode. Without charger it will suck down the battery fast. Benched with Antutu and got 175k on phone. In desktop on 30" monitor got 157k. Still faster than my Mate 9. My S8+ in Dex was just about worthless. Also with the M10 in desktop with wired mouse has zero lag. Bluetooth mouse a different story. So gaming is pretty good on a monitor.
Ok, I "solved" my problem by fluke. I would love if someone more techy than me could explain but this is what I did to fix the fact that the HDMI output looked more like 640x480 than a hi def picture.
Went to TV settings, and selected advanced, HDMI settings, and Changed HDMI "Auto" mode to HDMI Graphic mode (choice of Graphic/Video - video was default and was crap). As soon as I did this I had perfect outputted photos and videos.
According to one tv manual I found on a search:
"Graphic: HDMI input timing set to Graphic mode (PC) - The image is full scan.
Video: HDMI input timing set to Video mode. The image is over scan."
According to someone on a completely unrelated PS4 forum:
"Basically by changing the HDMI mode to graphic, the HDMI output (be it gaming console, pc, or cable) bypasses "extra" processing features of the TV that
make the game and TV broadcasts look crappy and also causes lag. By bypassing those features you will get a much clearer picture."
Either way, it's fixed. On my tv. And on a shop tv the same issue. So given that I've connected previous phones with hdmi connections a few years ago without issues, this suggests that it is something to do with how the Mate 10 outputs signals in a way that TV recognises?
Love to hear an explanation from the experts. Thanks.
Edit: someone else with a similar issue on another device - so it seems the issue is that the Mate 10 is not recognised by most Televisions as a "PC" which would correct hdmi mode to "graphics" ?
"When I switch between the Blu-Ray and the PC on two separate HDMI inputs, the TV doesn't detect that's it's connected to a PC, so it doesn't switch from video to graphics mode - which is required for it to look good as a computer monitor.
Since the TV deosn't recognize the PC and auto switch to graphics mode, when I switch from Blu-Ray to PC, I have to dig down into the menu and switch the HDMI mode to graphics manually - and then back when I go to the Blu-Ray. -- Major pain if I'm switching back and forth."
Any ideas? Is this something Huawei could fix in firmware?
podgeandrodge said:
Any ideas? Is this something Huawei could fix in firmware?
Click to expand...
Click to collapse
It looks like its related to the TV resolution : I have the same issue (640*480 resolution) when I connect the mate 10 pro to a 4K native TV but it works perfect when connected to a full HD TV !! It's a shame as 4K tend to be the standard display, so I guess Huawei should fix it whith a firmware update. Any other solution (HDMI 2.0 cable maybe??) ?