Related
Can anybody help
i have rooted xperia neo v with unlocked bootloader
installing Teamxperia ROM using CW Recovery
& Now its stucked at sony ericsson boot animation logo at last stage
its been half hour since then but no luck
tried using flashtool
device gets connected but error preparing files occured
Please any one Help me with this
Hi mate.
Did you flash the boot.img first and then the rom?
No offence but your description of how the error occurred needs a bit more information. Give us more details over what you have done and in what steps, and then I'm sure we can help you.
jtushar53 said:
Can anybody help
i have rooted xperia neo v with unlocked bootloader
installing Teamxperia ROM using CW Recovery
& Now its stucked at sony ericsson boot animation logo at last stage
its been half hour since then but no luck
tried using flashtool
device gets connected but error preparing files occured
Please any one Help me with this
Click to expand...
Click to collapse
Did you wipe everything?
Wipe: cache, dalvik cache, user, system.
JediSchmedi said:
Hi mate.
Did you flash the boot.img first and then the rom?
No offence but your description of how the error occurred needs a bit more information. Give us more details over what you have done and in what steps, and then I'm sure we can help you.
Click to expand...
Click to collapse
i have downgraded my firmware from here
as i previously updated it to .62 which was untouched
then rooted it with Easy rooting toolkit from DoomLoRD which only works on .42 firmware then i updated it with OTA to .62
my phone is rooted with superuser in my menu
then i've backup my phone using CWM Recovery 5.... which i saved it on SD Card
then install custom rom using instruction from here
at the last stage where phone restart it just got stuck
I Do Wipe
Madfysh said:
Did you wipe everything?
Wipe: cache, dalvik cache, user, system.
Click to expand...
Click to collapse
i have wipe data / factory reset as instructed in Team Xperia Post from here
whhhussssshhhh
Thanks, Madfysh & JediSchmedi
as my flash tool installed in C Drive and my C Drive was full as soon as i cleared it my phone begin to flash and now i have stock rom .42 got from
http://forum.xda-developers.com/showpost.php?p=19808360&postcount=3
But what should i do to get custom Team Xperia ROM should i try it again as i'm very sure that i have properly followed each and every steps from start to end
jtushar53 said:
Thanks, Madfysh & JediSchmedi
But what should i do to get custom Team Xperia ROM should i try it again as i'm very sure that i have properly followed each and every steps from start to end
Click to expand...
Click to collapse
First time I flashed my phone it didnt work proper.
So I flashed the boot.img again and then updated with the update.zip (after resetting everything ) in the phone a second time and then it worked.
jtushar53 said:
But what should i do to get custom Team Xperia ROM should i try it again as i'm very sure that i have properly followed each and every steps from start to end
Click to expand...
Click to collapse
Try what I told/asked in my post above.
Madfysh said:
Try what I told/asked in my post above.
Click to expand...
Click to collapse
tried it second time but same SE logo without animation
i do wipe cache, dalvk, factory reset before installing ROM
but now can't enter into CWM recovery
what i 'am doing to enter recovery mode
removes battery
switch it on then quickly presseing volume down key continously
which i was doing before successfully
Try to flash a new kernel/reflash your kernel?
First off I need to know Did you unlock bootloader / flash a custom kernel / wipe all data / cash/flash v 1
Roms for unlocked boot loader because of the script
(And no themes over this )
Sent from my MT15i using Tapatalk
hiiiiiii
kormatoes said:
First off I need to know Did you unlock bootloader / flash a custom kernel / wipe all data / cash/flash v 1
Roms for unlocked boot loader because of the script
(And no themes over this )
Sent from my MT15i using Tapatalk
Click to expand...
Click to collapse
now my bootloader unlocked , wiped all data, flash stock rom .42 and OTA updated to .62
the only thing i have not done is to install custom kernel i'm on stock kernel right now finding good custom kernel then try to install SE Tweaked 1.0
can you please tell where i am going wrong
OR
Proper way to get custom stable kernel and stable ROM
Plz, Thank You
jtushar53 said:
now my bootloader unlocked , wiped all data, flash stock rom .42 and OTA updated to .62
the only thing i have not done is to install custom kernel i'm on stock kernel right now finding good custom kernel then try to install SE Tweaked 1.0
can you please tell where i am going wrong
OR
Proper way to get custom stable kernel and stable ROM
Plz, Thank You
Click to expand...
Click to collapse
Night elf v 9 no need to downgrade rom.
Our v 1 is rooted
Flash kernel
Flash rom
Easy
No tricks
Sent from my MT15i using Tapatalk
jtushar53 said:
i do wipe cache, dalvk, factory reset before installing ROM
Click to expand...
Click to collapse
You didn't do all I said
Madfysh said:
Did you wipe everything?
Wipe: cache, dalvik cache, user, system.
Click to expand...
Click to collapse
Please go to advance edition and change the title of the thread, at least it can help to other with similar issue.
Also please read the forum rules before post next time, specially #3. Thanks
I think this is more our fault as we don't specify the need for unlocked boot loader in our thread
I just wish they would use pm service instead of loads of new threads
And yes naming thread hellllllllppppppppp is just daft
Sent from my MT15i using Tapatalk
thank you for replies
as the only problem i was facing that my C Drive was full and i couldn't flash my phone with FlashTool but now i am
Thank You
jtushar53 said:
as the only problem i was facing that my C Drive was full and i couldn't flash my phone with FlashTool but now i am
Thank You
Click to expand...
Click to collapse
Read the mod post
Sent from my MT15i using Tapatalk
Stock Jelly Bean ROM for unlocked Transformer Prime
Info:
Stock ROM based on WW Jelly Bean 10.4.2.15 (Android 4.1.1)
Fully deodexed
Rooted
New JB bootloader included
TWRP 2.2.2.1 recovery for JB included
Can be flashed over any ROM
Warning:
Use this rom at your own risk. I am not responsible for any bricked devices.
I strongly recommend enabling NVFlash before flashing this ROM here. You CAN NOT enable NVFlash on JB bootloader!!
Use only recovery made for JB or you can brick device.
Instruction:
Download the ROM
Copy the file to your device and reboot into recovery
Wipe data/cache (factory reset) - optional
Flash the ROM update zip
Reboot and wait for final flash and then let the device boot up (it will take some time)
Enjoy Jelly Bean
Download:
WW_epad-user-redvirus-10.4.2.15.zip - 336.68 MB
MD5:a2ab74c20fd3bd1946396c1d0370c4b5
Version without bootloader and recovery:
Only for those with JB bootloader!!
WW_epad-user-redvirus-10.4.2.15-forJB.zip - 328.98 MB
MD5:a62c643ec27597c771b73d7f62ecbade
Thank you sparkym3 for your guide
Is step 3 (Wipe data/cache (factory reset)) absolutely required when updating from .28 rooted ROM for unlocked devices?
Stock ASUS update doesn't require wipe when you update from the older ASUS ROM.
Will this work without wipe if I'm updating from rooted 9.4.2.28 ROM?
Do we get to choose not to install bootloader and recovery during install for us that already have both the jb bootloader and jb recovery?
Sent from my HTC Sensation XE with Beats Audio using Tapatalk 2
CrazyCoder said:
Is step 3 (Wipe data/cache (factory reset)) absolutely required when updating from .28 rooted ROM for unlocked devices?
Stock ASUS update doesn't require wipe when you update from the older ASUS ROM.
Will this work without wipe if I'm updating from rooted 9.4.2.28 ROM?
Click to expand...
Click to collapse
You can install this ROM without wipe. /info updated
andy_rose said:
Do we get to choose not to install bootloader and recovery during install for us that already have both the jb bootloader and jb recovery?
Sent from my HTC Sensation XE with Beats Audio using Tapatalk 2
Click to expand...
Click to collapse
I made a version without bootloader and recovery.
redvirus said:
I made a version without bootloader and recovery.
Click to expand...
Click to collapse
Thanx man, appreciate it
Downloaded your latest JB for people already with new bootloader and TWRP but it failed to flash.
Can you send me recovery.log?
10x !!!!!!!!!!!
The md5 is fine but it just would not start got failed at the very beginning, I dont know if a recovery log is possible since it never recovered from anything.
Edit: Should have added I was on Craigacgomez US JB with TWRP.
Edit 2: Runing a log, should be ready in a few.
Edit 3: Sent!
Just for the record: I have a CM10 preview rom with CWM 5.8.3.4 currently on my Prime. Am I able to just wipe and flash this like any normal rom? I was told I'd have to revert back to stock ICS before flashing the new release or it might brick.
Sent from my SPH-D710 using xda premium
will try this when i get home and report back!
Hello i am on android 4.0.3 WSG Rom. Am i able to flash this rom?
Sent from my Transformer Prime TF201 using xda app-developers app
Ok the WW for JB bootloader and TWRP worked perfectly my earlier problem was I had TWRP 2.2.2.0 installed for some weird reason once on TWRP 21 it flash no problem. In my case I had to also reflash Superuser 3.2
Thanks for this Rom. Just a question. I have a US TF201 rooted and unlocked. All I am hoping to do is to install stock JB. Can I install this Rom or no? The only other Rom is see that is stock is the one that says JRO03C and that one is for US... But I don't know if it's completely based on the official release for the TF201. Thought it was based off of the update for the 300 or something. I appreciate the help
Sent from my SCH-I535 using Tapatalk 2
antnyp85 said:
Thanks for this Rom. Just a question. I have a US TF201 rooted and unlocked. All I am hoping to do is to install stock JB. Can I install this Rom or no? The only other Rom is see that is stock is the one that says JRO03C and that one is for US... But I don't know if it's completely based on the official release for the TF201. Thought it was based off of the update for the 300 or something. I appreciate the help
Sent from my SCH-I535 using Tapatalk 2
Click to expand...
Click to collapse
I think its the same official tf201 US version many people prefer the ww tho and if i'm wrong someone will be shortly to correct me lol
---------- Post added at 01:21 AM ---------- Previous post was at 01:14 AM ----------
Nevermind i am wrong but i am running the US update one and is sold
I installed it and it work great, got the buildprop tweak done and browser2ram install, have no complaint, its very smooth and fast, I don't see any reason so far to OC and my Prime is one of the first BC0, still running strong
Thanks for this. Any chance of an odex version too for boot speed?
Sent from my HTC Sensation Z710e using xda premium
Works great on my prime. Thank you!
Had too flash the rom twice before it worked ( maybe because I delete the complete tablet incl. Rom before)
been having trouble since manually updating to official jb not being able to root or get adb to wrk to root just flashed this and it done it all for me ... thanks alot
Sent from my Transformer Prime TF201 using Tapatalk 2
adz63 said:
been having trouble since manually updating to official jb not being able to root or get adb to wrk to root just flashed this and it done it all for me ... thanks alot
Click to expand...
Click to collapse
I also manually updated, lost root, and can't get adb or fastboot to work... And now I'm stuck with the stock recovery, which won't let me select anything. Is there something I need to do first?
what i did was i followed hanzoo guide about unlocking bootloader and then when i already unlocked and have a cwm international installed and supersu i followed his guide on how to flash a rom so im hyped to try my first custom rom i went to recovery made a backup and downloaded this rom ROM 05/2/13 Cm10.1 4.2.1 hox+ international, first i backup then i "click Wipe. Wipe Cache, Dalvik, Factory Reset and System" and then i flash this zip in recovery and installed the rom and i forgot to install the gapps 4.2 now im stuck in the cynogenmod logo. can i still fix this please help!
Flash the correct kernel
Notechis said:
Flash the correct kernel
Click to expand...
Click to collapse
which kernel sir please help i dunno which one i should download so im scared im might never use my phone again,,
http://goo.im/devs/maxwen/BLADE/boot-BLADE-CM10.1-201302241749.img
FOLLOW THIS THREAD
http://forum.xda-developers.com/showthread.php?t=2027201
Notechis said:
http://goo.im/devs/maxwen/BLADE/boot-BLADE-CM10.1-201302241749.img
FOLLOW THIS THREAD
http://forum.xda-developers.com/showthread.php?t=2027201
Click to expand...
Click to collapse
sir just a question should i use hanzoo all in one kit to flash that kernel? because i dont have that TWRP recovery.
Yes, use the toolkit to flash a kernel.
Always use a custom recovery like TWRP or CWM to make a backup before flashing something - 1 st RULE
Notechis said:
Yes, use the toolkit to flash a kernel.
Always use a custom recovery like TWRP or CWM to make a backup before flashing something - 1 st RULE
Click to expand...
Click to collapse
thank you so much my phone is working now, uhm after this how can i install twrp sir
Download it and flash it, using the toolkit,too.
- use the right version
Notechis said:
Download it and flash it, using the toolkit,too.
- use the right version
Click to expand...
Click to collapse
Half the issues you guys have, is cause you use toolkits n such to do the simplest of tasks like flash a kernel.
Sent from my HTC One X+ using Tapatalk 2
AndroHero said:
Half the issues you guys have, is cause you use toolkits n such to do the simplest of tasks like flash a kernel.
Sent from my HTC One X+ using Tapatalk 2
Click to expand...
Click to collapse
i agree it just over complicates things, just a simple adb\fastboot command and done..
fastboot is a whole lot easier.
Sent from my HTC One X+ using xda premium
Stock ROM JB 4.1.2 98.72.16.XT912.Verizon.en.US / XT910 READY BMM 0.3.4THIS IS JB 4.1.2 FOR XT910TO INSTALL THIS ROM YOU NEED FLASH NEW VERIZON JB 4.1.2 KERNEL FIRST VIA BMM 0.3.4MAKE SURE YOU BACKUP YOUR CID THEN ERASED VIA BMM 0.3.4 BEFORE BOOTKERNEL
ROM
artur0588 said:
Stock ROM JB 4.1.2 98.72.16.XT912.Verizon.en.US / XT910 READY BMM 0.3.4THIS IS JB 4.1.2 FOR XT910TO INSTALL THIS ROM YOU NEED FLASH NEW VERIZON JB 4.1.2 KERNEL FIRST VIA BMM 0.3.4MAKE SURE YOU BACKUP YOUR CID THEN ERASED VIA BMM 0.3.4 BEFORE BOOTKERNEL
ROM
Click to expand...
Click to collapse
Right. I'll come back with results.
Debloated and GSM ported?
Thanks
heblu said:
Right. I'll come back with results.
Debloated and GSM ported?
Thanks
Click to expand...
Click to collapse
Yes, no verizon apps and GSM ready. Don't need GSM Patch, everything working.
artur0588 said:
Yes, no verizon apps and GSM ready. Don't need GSM Patch, everything working.
Click to expand...
Click to collapse
Great. In the next few hours I'll be back
once i boot up my device, it says
"Security test failure
Validation of cryptographic module failed, please restart"
i cant get pass that screen, what am i supposed to do after installing the rom
right now I'm installing apps with tibu. so far, so good.
did you flash right kernel? wipe all then install rom?
Any noticeable changes ?
Like my work visit my channel once on YouTube
YouTube.com/user/Therazrguy
heblu said:
right now I'm installing apps with tibu. so far, so good.
did you flash right kernel? wipe all then install rom?
Click to expand...
Click to collapse
hmm im installing it on rom 2, and rom 1 is JBX D-wiz
am i supposed to flash back to verizon jb first before installing ?
danieltang34 said:
once i boot up my device, it says
"Security test failure
Validation of cryptographic module failed, please restart"
i cant get pass that screen, what am i supposed to do after installing the rom
Click to expand...
Click to collapse
You forgot flash new kernel
heblu said:
right now I'm installing apps with tibu. so far, so good.
did you flash right kernel? wipe all then install rom?
Click to expand...
Click to collapse
Hi, cannot download KERNEL, can you please attached it in another way, tks in advance.
danieltang34 said:
hmm im installing it on rom 2, and rom 1 is based JBX D-wiz
am i supposed to flash back to verizon jb first before installing ?
Click to expand...
Click to collapse
first reboot to BMM recovery and flash kernel from OP. then wipe all and install rom
Lzto1320 said:
Hi, cannot download KERNEL, can you please attached it in another way, tks in advance.
Click to expand...
Click to collapse
I have attached in OP
artur0588 said:
i have attached in op
Click to expand...
Click to collapse
tks so much for your work! Great man!!!
Hi, some noobie here, just wanna make sure the following steps are correct before i try, really scared if got bricked:
1. Install BMM 0.3.4 on stock ICS 4.0.4
2. Reboot to BMM, backup CID & whole system
3. Erase CID
4. Flash Kernel
4. Clear data, dalvik, cache
5. Flash ROM into System_1
6. Profit?
Or anything else should i do? Thanks for any suggestion. Sorry if already asked frequently..
Is this official version of jelly bean or leaked? Official kernel?
Sent from my XT910 using xda premium
shakti15 said:
Is this official version of jelly bean or leaked? Official kernel?
Sent from my XT910 using xda premium
Click to expand...
Click to collapse
This is from the soak test I believe.
hansip87 said:
Hi, some noobie here, just wanna make sure the following steps are correct before i try, really scared if got bricked:
1. Install BMM 0.3.4 on stock ICS 4.0.4
2. Reboot to BMM, backup CID & whole system
3. Erase CID
4. Flash Kernel
4. Clear data, dalvik, cache
5. Flash ROM into System_1
6. Profit?
Or anything else should i do? Thanks for any suggestion. Sorry if already asked frequently..
Click to expand...
Click to collapse
al good
after you have backup CID and your kernel you can restore them just to be sure
you can flash rom in second system (webtop partition). To switch, reboot into BMM, flash desired kernel, reboot
shakti15 said:
Is this official version of jelly bean or leaked? Official kernel?
Sent from my XT910 using xda premium
Click to expand...
Click to collapse
yes
heblu said:
yes
Click to expand...
Click to collapse
i have a sily question. can we dual boot this rom and flash kernel separately becouse i donnt want to lose my stock rom ics and all apps.
one more question is there a way to backup my whole rom and restore as it is when i want .?
one question more ics will not work on jelly bean kerne.?
thanx in advance for answer my silly question
Screenshots?
This ROM is like the Verizon ROM but without the Verizon apps and for XT910 right? Is the original one, with motoblur?
PatrickDziura said:
Screenshots?
This ROM is like the Verizon ROM but without the Verizon apps and for XT910 right? Is the original one, with motoblur?
Click to expand...
Click to collapse
Yes, original.
I am running on a custom ROM developed by sir DivakshJB eXperience™ v2 【Fastest+Smoothest】【AROMA】【supports OC】 by @Divaksh. Now I want to install another ROM still from him, the eXperience Innovation - "The Fastest Smoothest Stable JB ROM" [AROMA] by @Divaksh, what shall I do? Please help!!!
jedts0357 said:
I am running on a custom ROM developed by sir DivakshJB eXperience™ v2 【Fastest+Smoothest】【AROMA】【supports OC】 by @Divaksh. Now I want to install another ROM still from him, the eXperience Innovation - "The Fastest Smoothest Stable JB ROM" [AROMA] by @Divaksh, what shall I do? Please help!!!
Click to expand...
Click to collapse
As you can see, the later one requires an unlocked bootloader. So you need learn how to unlock first. It's easy, and Sony has official guides on their website. All is easy after unlocking bootloader. Hope you got it!
wondertx said:
As you can see, the later one requires an unlocked bootloader. So you need learn how to unlock first. It's easy, and Sony has official guides on their website. All is easy after unlocking bootloader. Hope you got it!
Click to expand...
Click to collapse
It's already unlocked before installing the ROM I have right now.
jedts0357 said:
It's already unlocked before installing the ROM I have right now.
Click to expand...
Click to collapse
Backup your data and follow installation instructions
wondertx said:
As you can see, the later one requires an unlocked bootloader. So you need learn how to unlock first. It's easy, and Sony has official guides on their website. All is easy after unlocking bootloader. Hope you got it!
Click to expand...
Click to collapse
ChikeD said:
Backup your data and follow installation instructions
Click to expand...
Click to collapse
Now I'm stucked at the Sony Custom ROM logo and couldn't boot. Please help! What shall I do next? :crying:
jedts0357 said:
Now I'm stucked at the Sony Custom ROM logo and couldn't boot. Please help! What shall I do next? :crying:
Click to expand...
Click to collapse
Did you follow the instructions to the word?
What steps have you taken exactly?
ChikeD said:
Did you follow the instructions to the word?
What steps have you taken exactly?
Click to expand...
Click to collapse
Actually I lost the steps/procedures I followed when I unlocked, rooted, and installed this custom rom i have. So what I did was to look under my memory bank but unfortunately, I just recalled a few. Of course, there was no more unlocking of bootloader and rooting(flashmode) done because it was already unlocked and rooted during my first update/installation, I just wipe cache, dalvik-cache and wipe date/factory reset using cwm recovery. After that, I flashed the JB ROM still using cwm recovery, reboot it on recovery and wipe cache, dalvik-cache and wipe date/factory reset then reboot. My phone restarted but only up to the sony custom rom logo. Can you please help?
jedts0357 said:
Actually I lost the steps/procedures I followed when I unlocked, rooted, and installed this custom rom i have. So what I did was to look under my memory bank but unfortunately, I just recalled a few. Of course, there was no more unlocking of bootloader and rooting(flashmode) done because it was already unlocked and rooted during my first update/installation, I just wipe cache, dalvik-cache and wipe date/factory reset using cwm recovery. After that, I flashed the JB ROM still using cwm recovery, reboot it on recovery and wipe cache, dalvik-cache and wipe date/factory reset then reboot. My phone restarted but only up to the sony custom rom logo. Can you please help?
Click to expand...
Click to collapse
Instructions says you need to install stock ROM.
ChikeD said:
Instructions says you need to install stock ROM.
Click to expand...
Click to collapse
Meaning after the incident of not rebooting of my phone, what I should do was flash stock rom using flashtool then install the custom rom via recovery?
first flash stock *.ftf file using flashtool then boot it first so that it becomes stable then again root your phone and install any cwm recovery you want then enter cwm make all the wipes that are given in the tutorial then flash the rom and then reboot
ChikeD said:
Did you follow the instructions to the word?
What steps have you taken exactly?
Click to expand...
Click to collapse
jedts0357 said:
Meaning after the incident of not rebooting of my phone, what I should do was flash stock rom using flashtool then install the custom rom via recovery?
Click to expand...
Click to collapse
Edit: I did what you have suggested to flash the stock-based rom via flashtool and flash the custom rom via recovery but it's still stucked at the Sony logo...
Please help!
garvitdelhi said:
first flash stock *.ftf file using flashtool then boot it first so that it becomes stable then again root your phone and install any cwm recovery you want then enter cwm make all the wipes that are given in the tutorial then flash the rom and then reboot
Click to expand...
Click to collapse
I think that's what I did. But can you give me a link to a more comprehensive or step by step procedure on how to do this one?!
jedts0357 said:
I think that's what I did. But can you give me a link to a more comprehensive or step by step procedure on how to do this one?!
Click to expand...
Click to collapse
The instructions are there
http://forum.xda-developers.com/showthread.php?p=42031683#post42031683
It does not help sir. It's not detailed.
jedts0357 said:
It does not help sir. It's not detailed.
Click to expand...
Click to collapse
As detailed as it should be.
Did you install the firmware version they tell to install?
ChikeD said:
As detailed as it should be.
Did you install the firmware version they tell to install?
Click to expand...
Click to collapse
Yes sir! I think I should repeat the procedures again and again until I could figure out the right and the best way to install this custom rom.
For any help, I am still accepting it. For now, maybe trial and error is the best way possible.
jedts0357 said:
Yes sir! I think I should repeat the procedures again and again until I could figure out the right and the best way to install this custom rom.
For any help, I am still accepting it. For now, maybe trial and error is the best way possible.
Click to expand...
Click to collapse
Keep in mind that ROM makers don't have means to test too many situations, so they have tested it in one way the know it would work, anything that have not not been tested would probably fail.
ChikeD said:
As detailed as it should be.
Did you install the firmware version they tell to install?
Click to expand...
Click to collapse
ChikeD said:
Keep in mind that ROM makers don't have means to test too many situations, so they have tested it in one way the know it would work, anything that have not not been tested would probably fail.
Click to expand...
Click to collapse
I think I already found the best possible solution to my problem. Hope this it:
chrizer4 said:
Flash stock .54 firmware
Download JB base rom zip.
Extract the zip and flash the boot.img included
Enter CWM and wipe data, cache, dalvik
Flash JB base rom
Wipe data, cache, dalvik
Reboot and wait for it to setle..
Then, flash experiance innovation rom.
Reboot.
Enjoy one of the best and most beautiful rom i've ever tried on my sola!
Click to expand...
Click to collapse