downgrade 5.12 to 1.xx pls help - 7 Mozart General

hi all i already make a y cable by step enter usb mood ,atfer that appear( loading...)word on my phone screen very long time about 20 minit normal?nothing else appear just loading... word only pls help
i use 2gb card is ok? and i use this rom is ok to do NBH
RUU_Mozart_HTC_Europe_5.12.401.06_Radio_5.71.09.02a_22.51.50.21U_WP7.8_7.10.8835.35_NT_3La_V1_by_ansar
I ALREADY UNZIP THE RUU_signed.nbh AND CHANGE TO MOZAIMG.nbh .pls help ..!!
tq wish any anyone can help

You used the Goldcard Tool to prepair the SD Card ?
Here is the complete Tutorial again:
http://forum.xda-developers.com/showthread.php?t=1429318

Related

flash thru SD...need some advice pls

Hi,
have got m3100 which is stuck on the winodws mobile screen...so tried everything frm the wiki page and now want to try flash it thru the sd card.
I have got 512mb MicroSD ...
can someone pls explain me abt the root folder...i just copied the HERMIMG.nbh onto the sdcard and the screen wont go beyond "checking".
i dont knw abt the Root folder...how shall i create it? if anybody can help me pls
thx in advance!
XtremeGG said:
can someone pls explain me abt the root folder...i just copied the HERMIMG.nbh onto the sdcard and the screen wont go beyond "checking".
Click to expand...
Click to collapse
The root folder means the folder which "holds" all other folders: If your microSD card is on "F:", the root folder of your microSD card is "F:\".
It is on the instructions to make sure you don't copy the NBH file in "F:\My Documents\".
The card has to be formatted in fat32 and empty: should only contain HERMIMG.nbh in the root folder
The NBH image must match the CID on your device: You have a M3100 and there's no shipped rom with "ORANG001" CID, most probably your problem is this.
Hi pof...thanks for ya explaination.
if there is no shipped rom..does that mean..the HERMIMG.nbh file i got frm wiki...it wont work?
thanks agn
P.S. yes...i downloaded the Orange one frm wiki...if that doesnt come with ROM...can i flash it with the Radio ROM u supplied for the unlock? rename it HERMIMG.nbh
M3100 from Orange UK has CID: ORANG001
The rom on the wiki is from Orange Romania and has CID: ORANG008
You need to use a NBH file with the same CID on your device.
You can make your device SuperCID to avoid this restriction:
http://wiki.xda-developers.com/index.php?pagename=Hermes_SimUnlock
ohhhh...k..can i flash that patch thru the SD card as well? the radio patch..
i really appreciate ur help pof
thanks!
XtremeGG said:
ohhhh...k..can i flash that patch thru the SD card as well? the radio patch..
Click to expand...
Click to collapse
No, only through USB.
ok..doing that now...on my pc...its syin "Cheking information on your device...please wait..."
will it flash the patch radio ...even tho my m3100 wasnt startin well before? (was gettin stuck on windows screen)
once its done..i will post the result
POF....thank you very much m8...absolutely fantastic..i flashed the Radio ROM Patch..and the phone back alive agn...unlocked it as well
brilliant ..brilliant...thanks agn man!
XtremeGG
cool! glad it's back to live

help!how to get the img files which can flash atom by card?

when i flash atom by sd card,i see there are many files not found,they are:dm.nb0 flash.img agent.mot mot.mot cpld.img assetinf.img extended.img mdoc.img.and how to get these files?my atom can't start normally,it stopped at the first screen(o2 welcome),and when i perform a hard reset,the atom stopped at the "device clean boot...",however,i can start bootloader with camera key and reset,and can flash atom with sd card file(diskimg.nb0,eboot.img),and RUU.exe(diskimage_ver.nb0 ...),but all the method lead to a same result :stopped at "device clean boot...".so i want to try flash all the sd card files to save my atom.will anyone be kind enough to help me?very very thanks!sorry for my poor english!
top it manual
could anyone help me?
jiggs and alex_beda please help me!
i search the forum and find this thread http://forum.xda-developers.com/showthread.php?t=330393 please help me!
I read hundreds of pages on this forum, but I found no answer to the question: how to extract all ROm files from dump.bin file made by grab_it application?
it seems we need to know the address of each file and cut them out from dump.bin. I guess that there is an utility that does this work.
Here is the quote from this forum, but no answer:
Have you tried buzz grab_it ROM dumper? it worked perfectly well with the Atom. It dumped everything to SD Card. You just have to break it apart and identify the sections.
For the Atom:
diskimg.nb0
eboot.nb0
dm.nb0
flash.img
agent.mot
mot.mot
cpld.img
assetinf.img
extended.img
MDOC.img
Click to expand...
Click to collapse
Please, explain how to do it or give a link to the answer. Thanks in advance.
TheDestroyer said:
I read hundreds of pages on this forum, but I found no answer to the question: how to extract all ROm files from dump.bin file made by grab_it application?
it seems we need to know the address of each file and cut them out from dump.bin. I guess that there is an utility that does this work.
Here is the quote from this forum, but no answer:
Please, explain how to do it or give a link to the answer. Thanks in advance.
Click to expand...
Click to collapse
yes i try to contact with the writer but no reply i get....../pity
TheDestroyer said:
I read hundreds of pages on this forum, but I found no answer to the question: how to extract all ROm files from dump.bin file made by grab_it application?
it seems we need to know the address of each file and cut them out from dump.bin. I guess that there is an utility that does this work.
Here is the quote from this forum, but no answer:
Please, explain how to do it or give a link to the answer. Thanks in advance.
Click to expand...
Click to collapse
and if you have also a atom,please send me a copy of your dump.bin ,i will try to research in it.my atom is dead now..here is my email [email protected] thank you very much!
I've sent you the link to download my dump.bin.
I've got O2 XDA Atom.
If you find the solution of extraction dump.bin, post it here please.
Try this solution:
Somewhere in this forum I read that dump.bin is the same format as diskimage_Ver.nb0. So rename dump bin to diskimage_Ver.nb0 and to flash with SD card use the manual from wiki:
How to Upgrade the ATOM OS using SD Card Flashing:
Requirement: 256MB/512MB miniSD or less (tested to fully work) | 1GB miniSD or more (not supported)
extract diskimage_Ver.nb0 from Atom ROM Upgrade
edit nb0 file using hex editor
remove 12-byte header (08 00 00 00 30 34 32 36 30 36 31 31) and save file as diskimg.nb0
copy diskimg.nb0 into miniSD
enter into bootloader mode: CAMERA+RESET
wait for downloading of OS to finish
it is natural to see error messages like ('couldn't find file....') because we only loaded the one component for update
After a successful update, it will automatically HARD RESET.
Warning! You will brick your device if you mess with the bootloader. The bootloader is only updated on special cases as described in the upgrading problems.
Please, reply to my posts. Or if someone know the solution, post it here, plz.
TheDestroyer said:
Try this solution:
Somewhere in this forum I read that dump.bin is the same format as diskimage_Ver.nb0. So rename dump bin to diskimage_Ver.nb0 and to flash with SD card use the manual from wiki:
How to Upgrade the ATOM OS using SD Card Flashing:
Requirement: 256MB/512MB miniSD or less (tested to fully work) | 1GB miniSD or more (not supported)
extract diskimage_Ver.nb0 from Atom ROM Upgrade
edit nb0 file using hex editor
remove 12-byte header (08 00 00 00 30 34 32 36 30 36 31 31) and save file as diskimg.nb0
copy diskimg.nb0 into miniSD
enter into bootloader mode: CAMERA+RESET
wait for downloading of OS to finish
it is natural to see error messages like ('couldn't find file....') because we only loaded the one component for update
After a successful update, it will automatically HARD RESET.
Warning! You will brick your device if you mess with the bootloader. The bootloader is only updated on special cases as described in the upgrading problems.
Please, reply to my posts. Or if someone know the solution, post it here, plz.
Click to expand...
Click to collapse
i have compared these two files,they have many differents,so i don't think it can flash with sd.however,these do have a solution to divide it but we don't know...

How to flash a .nba file from SD card? (or... How to dump a ROM to a nk.nbf file?)

Can someone help me? I've flashed a ROM to my dead Wizard, without a backup.
But I have a friend whit other same wizard device, original.
I've already install a Wizard Love Rom, whithout any improvement. My screen is stopped in a green screen, showing just the IPL/SPL information.
My point is: I can dump a original ROM from my friend device and flash via bootloader or SD card?
How can I do it? I've used a aWizard tools to dump files, and get some .nba files, but... How can I flash it to my screwed device?
Thanks!!!

help

Hi apologies for the question in advance!!!
Im trying to flash a radio onto my O2 stock rom .. i ave successfully put hspl on device but when i try to flash the radio nothig happens????
I have renamed radio RUU_Signed.nbh and when i run custom ruu i get a prompt from computer to allow programme which i do and then nothing happens
THIS IS DRIVING ME MAD I HAVE SEARCHED THE FORUMS WATCHED THE YOU TUBE DEMO AND CANT THINK OF ANYTHING IM DOING THAT IS WRONG ????????????????????????????????????????????
Have you tried to copy the radio file (rename it to LEOIMG) to your SD card, reboot while holding volume down, and flash from there?
Will give it a go now thanks for the help much appreciated
NO LUCK STILL WONT WORK IM SURE IM JUST DOING SOMETHING WRONG BUT I DONT KNOW WHAT...
ABOUT TO THROW PHONE
you did unzip teh radio file and extract the .nbh, right? you didnt just rename the zip(or rar, or 7z, whatever) to .nbh did you?
(by teh way, for usb flashing, no need to change teh filenmame at all, just extract the .nbh, put in folder with customruu.exe, and run customruu. And of course this wont work if your spl ends .0000)
So you copied the radio file (named LEOIMG) to the root of your SD card?
You get past the 3 colored bootloader?
What msg do you get, whats happening?
Edit: What samsamuel said, you have to unzip the file first ofc
Hi yes to above i did extract, tried custumruu no joy, tried renaming LEOIMG AND SAVING TO SD CARD ROOT hold power and down volume , it goes into bootloader and just sits there doing nothing in the red band it says SPL-2.08 HSPL, and in the white band it says SERIAL?????????????????
does your pc run avast or mcafee? they can disable customruu. you can tell because when you run it nothing at all happens.
as for sd card failing, have you formatted it since you got it? cos the o2 stock one comes formatted to FAT but need to be FAT32 for flashing.
also, many 16gb and some 8gb cards can be temperemental
Thank you everyone
problem was with the computer not the process tried it on the desktop instead of lap top and it worked first time

How to remove HSPL and Put Spl

Hey guys ,
i am a novice so please help me,
i downloaded chucky rom for my htc hd2 and also put hspl
it worked properly but there is is some problem with some software and now i need to get it repaired through warranty so i need to put spl 3.03 or spl 2.08 and remove HSPL,please tell me how i can do that,
1.Remove HSPL
2.Put Spl 3.03
Also i do not use an sd card so can it be done without that(sd card)
please explain step by step since i am a beginner
thanks a lot
nishankyadav said:
Hey guys ,
i am a novice so please help me,
i downloaded chucky rom for my htc hd2 and also put hspl
it worked properly but there is is some problem with some software and now i need to get it repaired through warranty so i need to put spl 3.03 or spl 2.08 and remove HSPL,please tell me how i can do that,
1.Remove HSPL
2.Put Spl 3.03
Also i do not use an sd card so can it be done without that(sd card)
please explain step by step since i am a beginner
thanks a lot
Click to expand...
Click to collapse
You need SD card and get and official ROM, rename ruu_signed.nbh to LEOIMG and copy to SD card turn device off , hold volume down and power button together and commence update
Hi thanks for your reply,
I Have Downloaded The Following OFFICIAL ROM:
RUU_Leo_S_hTC_Asia_India_3.14.720.3_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe
But how do i find The RUU_Signed.nbh and should i rename it to LEOIMG.NBH or leoimg.nbh (will the uppercase or lower case make a difference)
nishankyadav said:
Hi thanks for your reply,
I Have Downloaded The Following OFFICIAL ROM:
RUU_Leo_S_hTC_Asia_India_3.14.720.3_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe
But how do i find The RUU_Signed.nbh and should i rename it to LEOIMG.NBH or leoimg.nbh (will the uppercase or lower case make a difference)
Click to expand...
Click to collapse
extract the offiical rom and look inside the folder, upper or lower cases doesnt matter
nishankyadav said:
Hi thanks for your reply,
I Have Downloaded The Following OFFICIAL ROM:
RUU_Leo_S_hTC_Asia_India_3.14.720.3_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe
But how do i find The RUU_Signed.nbh and should i rename it to LEOIMG.NBH or leoimg.nbh (will the uppercase or lower case make a difference)
Click to expand...
Click to collapse
you may extract the file by 7-zip, then you will find the file.

Categories

Resources