[Q] Bricked fassy - tried everything - Fascinate Q&A, Help & Troubleshooting

So, I've been trying for months to fix this thing. Read every post I could find so I wouldn't have to ask for help. Yet here I am. On my knees.
The lowdown:
-Fascinate was not previously rooted.
-Odin will not recognize it.
-Had some issues with the drivers b/c of windows 8, but was able to install from zadig using advanced startup options to bypass driver verification.
-Tried to flash back to stock gingerbread with Heimdall 3 times. Said it was successful everytime. I did use the same usb port that I used for the drivers and it is on the motherboard. And I used stock cable.
-When I try to boot up the phone after flash attempts, some text scrolls across the screen and it says something about "data wipe not successful." It scolls quickly, so I'm not sure what all it says. (One of my first attempts invloved trying to install cwm, so maybe that's why scrolling txt? It looks similar)
-Now, it boots to the little android dude with a white box and an arrow pointing out of it. I'm developing murderous feelings towards him.
In conclusion, I am a noob but have tried to educate myself as much as possible. Please be gentle.
Any ideas out there?

Have you followed this guide? http://forum.xda-developers.com/showthread.php?t=1238070
Read through this.
Sent from my SCH-I500 using xda app-developers app

noobchef said:
Have you followed this guide? http://forum.xda-developers.com/showthread.php?t=1238070
Read through this.
Sent from my SCH-I500 using xda app-developers app
Click to expand...
Click to collapse
I'm assuming you're referring to section 5? I have read through that guide, but odin doesn't recognize the phone.

OK. Last time that happened to me it was a cable issue. I had to use a cable i got from a store. Try to put it in download mode and plugging it into the wall before your computer.
Sent from my SCH-I500 using xda app-developers app

The older androids are much easier to brick, the newer ones have more sophisticated bootloaders and other controls to make it less likely to brick. By the time you're hard-bricked, I've seen recovery from there but it's not looking great. You'd probably need some hardware based solution like jtag or the unbrickable. Check my post a few days ago about a really bad experience with that -- don't make my mistakes.

Thanks for the replies. I have a couple other cables, so I'll give them a try and also try dl mode in wall before the computer. I probably won't buy another cable since I'm due for an upgrade in a couple months and am surviving with a continuum (yikes!).
@ yunoworkandroid So much for the unbrickable fascinate, right? lol

Related

[Q] USB Problem - KIES not recognizing the phone

-----------------------------------------------------------------------------------------------------------------
So I am on stock but somehow, KIES wont work. It keeps saying connecting, but wont go further than that.
USB debugging is unchecked so I am sure that it not the problem. I heard T-Mobile for ICS upgrade, so I just wanted to be prepared for ICS update for ATT, but idk, why KIES is not working.
Any suggestions?
Bent USB prong in the phone? I've had to adjust mine several times since I got it launch day. Or hardware failure. When my USB was bent it could still charge via a wall charger
Sent from my SGH-I777 using Tapatalk 2
yeah I think it works when i use at a certain angle.
I am trying to go back to the stock rom and hopefully i can return it, but for some reason Odin is not recognizing it. I mean the yellow box of COM:0 does not show up in the "I777UCKH7-CL503881-No-BL.exe"
Do you know the reason for this?
Missing driver.
IIRC I believe you were supposed to install KIES and another Samsung driver...but I remember using my phone on a netbook without it and it worked...
Try installing the USB driver on the official samsung website? I can't post links yet or I would link it...
jjack0310 said:
yeah I think it works when i use at a certain angle.
I am trying to go back to the stock rom and hopefully i can return it, but for some reason Odin is not recognizing it. I mean the yellow box of COM:0 does not show up in the "I777UCKH7-CL503881-No-BL.exe"
Do you know the reason for this?
Click to expand...
Click to collapse
There can be multiple possible reasons. You've eliminated some of them. Could be a failing usb port on the phone, bad cable, etc.
If you can't get usb to work, you can flash back to stock using mobile odin. I assume you are rooted. Just download the one-click downloader to your phone over wifi, or use dropbox or something to get it onto your phone. Mobile odin will recognize and flash from the one-click downloader. There is even a guide in the general section on how to do this.
creepyncrawly said:
There can be multiple possible reasons. You've eliminated some of them. Could be a failing usb port on the phone, bad cable, etc.
If you can't get usb to work, you can flash back to stock using mobile odin. I assume you are rooted. Just download the one-click downloader to your phone over wifi, or use dropbox or something to get it onto your phone. Mobile odin will recognize and flash from the one-click downloader. There is even a guide in the general section on how to do this.
Click to expand...
Click to collapse
Creepy just posted this while I was getting you the link for the guide to return to stock with no PC: http://forum.xda-developers.com/showthread.php?t=1691659.
I returned to stock, and I think I figured out the problem as well.
The problem I am quite sure is the USB port on the phone. Like I said, when I keep the USB cable connected at a certain angle, it works just fine.
I will just have to live with it now I think because ODIN displays custom binary installed and the count is 2, so I dont think ATT will let me exchange the phone for a new one.
jjack0310 said:
I returned to stock, and I think I figured out the problem as well.
The problem I am quite sure is the USB port on the phone. Like I said, when I keep the USB cable connected at a certain angle, it works just fine.
I will just have to live with it now I think because ODIN displays custom binary installed and the count is 2, so I dont think ATT will let me exchange the phone for a new one.
Click to expand...
Click to collapse
ehhh, its worth a try. Thats a hardware failure, the one that samsung is known for. Mine is starting to go out too.
I've returned 1 rooted phone with this issue, and warranty'd 1 rooted one that had a broken LCd.
These were Infuse's but same damn samsung problem.
MotoMudder77 said:
ehhh, its worth a try. Thats a hardware failure, the one that samsung is known for. Mine is starting to go out too.
I've returned 1 rooted phone with this issue, and warranty'd 1 rooted one that had a broken LCd.
These were Infuse's but same damn samsung problem.
Click to expand...
Click to collapse
Yeah I am surprised these hardware problem are so common.
No wonder most people are crazy about Apple sells so many iPhones
I had the very same issue as you are describing.
All you need to do is tweak the USB port a little. Did mine about 3 or 4 months ago and have not had to touch it since.
Use a small precision screw driver, fold a couple layers of Kleenex over the tip and gently bend it towards the screen side of the phone.
It WILL work perfect after that.
Sent from my SGH-I777 using xda premium
dschreiber69 said:
I had the very same issue as you are describing.
All you need to do is tweak the USB port a little. Did mine about 3 or 4 months ago and have not had to touch it since.
Use a small precision screw driver, fold a couple layers of Kleenex over the tip and gently bend it towards the screen side of the phone.
It WILL work perfect after that.
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
Will try it for sure. Thank you for mentioning which way to bend the port towards. lol
So I am on stock but somehow, KIES wont work. It keeps saying connecting, but wont go further than that.
USB debugging is unchecked so I am sure that it not the problem. I heard T-Mobile for ICS upgrade, so I just wanted to be prepared for ICS update for ATT, but idk, why KIES is not working.
Any suggestions?
jjack0310 said:
So I am on stock but somehow, KIES wont work. It keeps saying connecting, but wont go further than that.
USB debugging is unchecked so I am sure that it not the problem. I heard T-Mobile for ICS upgrade, so I just wanted to be prepared for ICS update for ATT, but idk, why KIES is not working.
Any suggestions?
Click to expand...
Click to collapse
Try uninstalling/reinstalling. That would be my first step.
Sent from my SGH-I777 using xda premium
dschreiber69 said:
Try uninstalling/reinstalling. That would be my first step.
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
I did that like two times already.
I even flashed a different stock Rom. I mean I started with The kernel + rooted UCKH7
but then since it didnt work, I tried Kernel + cache + rooted UCKK6 package from:
forum.xda-developers.com/showthread.php?t=1286432

Telus Fascinate Brick

-----------------
---This first post is outdated. My current question is one post below. I've left the content of this post for other noobs to see.
-----------------
Hey folks, sorry to bother you all but all input would be greatly appreciated. I'm rather unfamiliar with android flashing and kernels, and have spent the last 8 hours trying to figure this out to no avail.
Following this (http://forum.xda-developers.com/showthread.php?t=1238070) (section 5) guide on how to get back to stock gingerbread on my phone (after a few partially failed attempts flashing other roms), I was using Odin, had the .pit 2.2 as well as CI500_VZW_EH03_GB_CM.tar.md5 loaded into the program and left it running. About 20 mins in, the phone stopped progressing and I started to get concerned. After two hours, I powered down the phone and proceeded to reattempt the flash. This is when things got weird. My phone was unable to enter the Download Mode and instead showed Android system recovery when plugged in, or a black screen with a phone and a computer, with arrows between when not plugged in. The weirdest part is that the phone no longer recognized vol+ or the power button when in Android Recovery, and could only vol- to go down the menu, then was stuck at the bottom of the list.
I've searched everywhere on this site, and google to try and come up with a solution.
When pluggin into the computer, I hear a connection sound, but the device is not recognized by Odin. Pressing the running a blind vol+ and vol-, then a vol- to hope Odin recognizes the device, as pointed out in this (http://forum.xda-developers.com/showthread.php?t=1764022) thread, resulted in nothing. Holding vol- while pluggin in the usb cable, doesn't show the download mode. All of the steps in this (http://forum.xda-developers.com/showthread.php?t=1026746) thread proved futile, as most of them required download mode anyways.
I'm going to keep searching and keep you posted as things come. Your help as always will be greatly appreciated!
Edit: Things just got weirder... After a few more attempts at making this work, I'm now getting an "Unable to charge non-supported battery. See user manual." With this error, I'm not able to get into Android Recovery anymore. More searching...
Edit 2: AFAIK I'm gonna need a jig. Anyone confirm?
Edit 3: Got a jig, Download Mode working, all is well. Please remove this thread, or leave it for other noob flashers to see.
Hey Folks, its been a while since I last posted in this forum, but I ran into a pretty serious issue earlier this evening. I was attempting to flash CM9 to my T959D and was running into tonnes of trouble. Throughout my attempts I was restoring back to stock rom, kernel and bootloader. During one of these restores, Odin froze in Win 7. Since then I've been unable to detect any form of life from the phone. It simply sits in a black screen. Holding the vol down while booting, blind vol up and down cable inserting, using my Jig and inserting the cable/battery in various orders results in nothing. The most I hear is a device failure to connect sound in Windows with no sign of life in Odin.
What can I do?
Someone posted stating leaving the battery out for multiple days would reset something on the motherboard, allowing me to get into download mode. Though I was hoping to have this resolved tonight. I realize that there aren't many people left with these phones, but I hope someone has a solution to this.
I'm going to be installing ubuntu tonight on an older desktop in a effort to resolve this. Though my experience with it is very limited, and success is unknown.
NOT GOOD... You should wait and see if others have a better solution, but Unbrickable Mod may be your only option.
Posted from my Fascinate using XDA Premium
MultipleMonomials said:
NOT GOOD... You should wait and see if others have a better solution, but Unbrickable Mod may be your only option.
Posted from my Fascinate using XDA Premium
Click to expand...
Click to collapse
Thats not good to hear. Well, I was snooping around looking for someone who could solder this for me, to no avail. My soldering skills are non existent. The most I fixed was a door bell, and I did a terrible job. I won't be able to get my hands on a soldering iron until tomorrow, is it worth trying?
I have located someone who can do a jtag on this model but have a few questions in regards to this:
Since my bootloader was corrupted, would the jtag service put a new bootloader on?
Would it prevent the same thing from happening again?
Are jtags designed on a per-phone basis?
Since there is a telus fascinate T959D as well as a verizon fascinate, and both phones are completely different, would I need to make sure the jtag is meant for this phone?
Is there anything I need to be made aware of before doing this that I haven't mentioned?
I've haven't had any experience with JTAG, but I've heard Unbrickable Mod is preferable. If you're looking for someone who can solder, check out your local RC/hobby store. If that fails, check out an electronics store, though it may take some searching to find one.
Posted from my Galaxy Tab with CM10
TheMegosh said:
Thats not good to hear. Well, I was snooping around looking for someone who could solder this for me, to no avail. My soldering skills are non existent. The most I fixed was a door bell, and I did a terrible job. I won't be able to get my hands on a soldering iron until tomorrow, is it worth trying?
I have located someone who can do a jtag on this model but have a few questions in regards to this:
Since my bootloader was corrupted, would the jtag service put a new bootloader on?
Would it prevent the same thing from happening again?
Are jtags designed on a per-phone basis?
Since there is a telus fascinate T959D as well as a verizon fascinate, and both phones are completely different, would I need to make sure the jtag is meant for this phone?
Is there anything I need to be made aware of before doing this that I haven't mentioned?
Click to expand...
Click to collapse
Make sure you use the stock Samsung cable see if you can reinstall the drivers hook it into the computer and hold volume down if you can get any type of signal from the phone your good.
Sent from my SCH-I500 using Tapatalk 2
---------- Post added at 04:27 PM ---------- Previous post was at 04:24 PM ----------
MultipleMonomials said:
I've haven't had any experience with JTAG, but I've heard Unbrickable Mod is preferable. If you're looking for someone who can solder, check out your local RC/hobby store. If that fails, check out an electronics store, though it may take some searching to find one.
Posted from my Galaxy Tab with CM10
Click to expand...
Click to collapse
Hey no offence but stop telling everyone on the street they need too soljeir there phone with unbrickable mod before they can fix I'm tired of having too calm the person down after you said they have too open up the phone its utter bull****. 1 out of 10 soft bricks you may need it I've been without download mode and fixed mine just fine.
Sent from my SCH-I500 using Tapatalk 2
An update:
Took my phone in to get the jtag service... He said some of my partitions were corrupted, one of which was the boot layer. He put a new bootloader on, and showed it could be placed back into recovery and download mode, but when I got home the device was even more dead than when I left; no device failed to connect sound in windows, just nothing. I'm taking it back to him in a week after exams to get this resolved. Maybe the battery has reached the end of its life...? I checked it with a volt meter, and it had 3v+ so I really don't know.
Sent using Science!
As bbrad pointed out, there may be other solutions, and my answer could be totally wrong, but if even your bootloader is cooked, Unbrickable Mod may be your only hope. Since UM affects startup code literally hardwired into the chip, it should work as long as the JTAG doesn't interfere.
Posted from my Fascinate using XDA Premium
Another update. So apparently I flashed a bootloader from another phone, which royally screwed up the partition, kernel and mounted drives. The technician managed to get the original bootloader, kernel and rom on the phone and everything is working from stock again.
Why on earth is the 959d Telus version such a pain in the ass to customize?
Is there anyone on here that uses a 959d that can direct me to a proper method to leaving stock? Before this entire situation I had vodoo kernel on, with cwm, but every time I flashed a kernel it would hang on reboot and either sit on a black or white screen. In a lot of cases I would flash in cwm, reboot, then I would be brought back to cwm as if there was no rom on the phone at all, no matter what I formatted and wiped.
When I'm not on my phone I can link all of the guides I've tried that leave me back where I started. So I re flash back to stock using Odin.
At the end of the day, I have to ask, is it really worth it in the end? I've rooted and flashed many roms on other phones but have never run into as many problems as with this fascinate t959d
Sent using Science!

Ics update problems

Im trying to upgrade my samsung galaxy s2 (SGH-I777). I connect my phone using the Samsung Kies program. The installation goes all the way to the part where my phones screen has the android and it says "firmware upgrade i process..do not disconnect from target." it stays at 0% then i get the error saying "pc failed to recognise the mobile phone". Ive re installed drivers, used different cable used different port and still get the same error. please help.
Sounds like the part of the driver that recognizes download mode isn't installed at all or correctly. What I would do is close KIES, restart both phone and computer. now put the phone in download mode by holding vol up & vol down while plugging in usb cable. when you get warning screen press vol up to get to download mode. let the computer install the driver (don't open KIES yet)
after all of it is done, restart again and start from beginning - open KIES, connect phone, update to LE5
It's not all it's cracked up to be. I did it just out of curiousity but soon left it for custom roms again.
jack man said:
Sounds like the part of the driver that recognizes download mode isn't installed at all or correctly. What I would do is close KIES, restart both phone and computer. now put the phone in download mode by holding vol up & vol down while plugging in usb cable. when you get warning screen press vol up to get to download mode. let the computer install the driver (don't open KIES yet)
after all of it is done, restart again and start from beginning - open KIES, connect phone, update to LE5
It's not all it's cracked up to be. I did it just out of curiousity but soon left it for custom roms again.
Click to expand...
Click to collapse
i cant get it to open download mode using that method. it wont work
pichienyfl said:
i cant get it to open download mode using that method. it wont work
Click to expand...
Click to collapse
two questions:
1. are you holding the buttons down until you see something on the screen? hold both buttons down, insert usb cable (other end plugged into computer), hold buttons until you see text on the screen, then release.
2. no offense, but you do have the i777, right? so many people come here to the i777 forum but actually have the i727 Skyrocket, or something else.
jack man said:
two questions:
1. are you holding the buttons down until you see something on the screen? hold both buttons down, insert usb cable (other end plugged into computer), hold buttons until you see text on the screen, then release.
2. no offense, but you do have the i777, right? so many people come here to the i777 forum but actually have the i727 Skyrocket, or something else.
Click to expand...
Click to collapse
Yes i have the i777. i finally got it into download mode but i dont think its doing anything. it says "downloading do not turn of target" but its been like that for 20 min. my pc says usb not reconized
pichienyfl said:
Yes i have the i777. i finally got it into download mode but i dont think its doing anything. it says "downloading do not turn of target" but its been like that for 20 min. my pc says usb not reconized
Click to expand...
Click to collapse
Try out a different usb cable, you may need to try a few
FatBastid said:
Try out a different usb cable, you may need to try a few
Click to expand...
Click to collapse
This. Or try a different usb port on the pc...preferably one that is integral to the main board, rather than an add on extension one...
Sent from my SGH-I777 using Tapatalk 2
dandrumheller said:
This. Or try a different usb port on the pc...preferably one that is integral to the main board, rather than an add on extension one...
Sent from my SGH-I777 using Tapatalk 2
Click to expand...
Click to collapse
This. This is what worked for me back when I tried the official update. Didn't even have to reinstall drivers, just switched usb ports.
Sent from my SGH-I777 using Tapatalk 2
FatBastid said:
Try out a different usb cable, you may need to try a few
Click to expand...
Click to collapse
Ive tried everything and still no go. it keeps failing at the same spot. ive tried different usb cables even different computers and still nothing.
Then I guess the powers that be are basically telling you to go with a custom ROM
Stock is overrated. Try semi or something similar. I personally like aosp ROMs. Paranoidandroid is awesome
Sent from my SGH-I777 using xda app-developers app
I would try a custom ROM for sure. I just came from an iPhone 4 and loading AOKP on my i777 was a breeze. I never messed with whatever was on it before so I wouldnt know. Im not sure if there is a one click stock ROM you could flash with odin. Does odin even recognize your phone? If not full uninstall of kies and reinstall and be sure that you have the samsung drivers installed, which you said you have done time and again.
But really though, check out the Task and Ktoonsez AOKP rom, if you dont like there are several to choose from. and then there is this galaxys2root.com website. That has a whole bunch of youtube ROM reviews. Im still learning, but willing to help out a fellow noob. Good luck and update us on whats happening
FatBastid said:
and then there is this galaxys2root.com website. That has a whole bunch of youtube ROM reviews.
Click to expand...
Click to collapse
Nooooooo...
Seriously, don't steer people to that place. Read around here for a little while and you'll learn why.
FatBastid said:
and then there is this galaxys2root.com website. That has a whole bunch of youtube ROM reviews.
Click to expand...
Click to collapse
Nononononononononononononono:thumbdown::thumbdown::thumbdown::thumbdown::thumbdown::thumbdown::thumbdown::thumbdown:
Sent from my SGH-i777 using XDA
A YouTube video is pretty noob friendly for just choosing a rom. Dev forums are full of noobs who have no idea what they are doing. And I didn't find any worthy reviews on roms other than fan boys.
Sent from my SGH-I777 using xda app-developers app
FatBastid said:
A YouTube video is pretty noob friendly for just choosing a rom. Dev forums are full of noobs who have no idea what they are doing. And I didn't find any worthy reviews on roms other than fan boys.
Sent from my SGH-I777 using xda app-developers app
Click to expand...
Click to collapse
Not when it is from galaxys2root
Sent from my Sony Xperia Ion
I'm just about to give up. I keep getting the sane error "USB not recognized " what I don't get is I plug it into my laptop, it says the drivers are ready blah blah blah. I open kies and kies acknowledges that my galaxy is plugged and automatically prompts me to upgrade. But after it downloads the firmware and then it starts to install onto my galaxy then I get that stupid USB not recognized error and it fails
Sent from my SAMSUNG-SGH-I777 using xda app-developers app
That really sucks. I'm out of ideas guy. I'm quite the android noob. Perhaps someone else can chime in. Otherwise I know if the phone is within a year old Samsung does a free replacement. It could just be your unit
Sent from my SGH-I777 using xda app-developers app
Its not the phone. Its a driver or usb issue I'm 99% sure. Cause it was a huge pain when I wanted to try it and finally got it working.
Sent from my SGH-I777 using Tapatalk 2
Check your "android debugging" turning it on or off that could interfere with your PC connection
Sent from my SAMSUNG-SGH-I777 using xda app-developers app
@ pichienyfl - What OS do you have on your computer? Windows XP/Vista/7? Mac OS? Linux?
I agreed with Phalanx7621 that it is not your phone (at this point). Especially if you have Windows 7, you will have to install the right driver for it. Or it will not work correctly.

[Q] I'm Convinced...

that CASUAL does not work. Oh wait, let me guess, I don't have the right (1 of how many different ones suggested) usb driver, right? And I'm not in ADB, right? And I haven't tried different cables, and ports, and CADI on its own, and zadig, and usbdeview, and pulling the battery when it stalls in download mode (when CASUAL was still recognizing the phone, now neither CASUAL nor ODIN connect to it)? Sorry for the sarcasm, but I'm incredibly frustrated here. How does "one click" turn into a week of trying and trying and trying, and not only not making progress, but seemingly moving backwards where now I can't even get programs to connect? Is there something less messy, contradictory (seriously, the dev thread says "stock anything" but when trying the battery pull and reboot it goes off on me: OMFG WHAT THE HELL ARE YOU DOING? I WARNED YOU! YOU NEED TO ROOT FIRST.) way to unlock? Or a more concise thread of troubleshooting CASUAL (And please, I don't need a link to the same dev thread I just referenced, again.)?
Well I guess the rest of us that followed Adam's thread and were easily unlocked and loading ROMs daily are magicians or something?
Try a different USB port and a different computer. I could not get it to work at all on one PC in Windows or Linux, but it worked first try as soon as I tried it on my laptop.
Yes you caught us it was all a huge conspiracy to get you to brick your phone. The hundreds of people that have said they used the program where all in on it.
Sent from my SCH-I605 using xda app-developers app
dmonger11b said:
Yes you caught us it was all a huge conspiracy to get you to brick your phone. The hundreds of people that have said they used the program where all in on it.
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
Dude, you weren't supposed to tell him!
Honestly if you can't run casual at this point, you shouldn't be doing it at all. I say this because when a "real" problem comes up you won't be equipped to handle it. Then you really will be SOL.
Sent from my SCH-I605 using xda app-developers app
nosympathy said:
Honestly if you can't run casual at this point, you shouldn't be doing it at all. I say this because when a "real" problem comes up you won't be equipped to handle it. Then you really will be SOL.
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
BINGO!!
Yea maybe try a different computer. I tried my laptop multiple times and it didn't work but once I did it on my surface pro it worked right away
definitely having the same problem, my solution: going to reinstall Windows 7 and see if that fixes my problems. if that doesn't then I'll just install a Linux distro on my computer and install java and see if i can get it to run that way. if anything I'll try it on another laptop running Windows xp or another till i get this **** to work. it honestly can't be that hard to unlock the note 2. maybe I'll try to root first and then try to unlock.. idk but i have faith in Adam and the other devs who've helped him and tested for him. I'll get it to work or die trying, because Verizon deserves that middle finger, big time.
anyway good luck on your journey!
ztotherad said:
definitely having the same problem, my solution: going to reinstall Windows 7 and see if that fixes my problems. if that doesn't then I'll just install a Linux distro on my computer and install java and see if i can get it to run that way. if anything I'll try it on another laptop running Windows xp or another till i get this **** to work. it honestly can't be that hard to unlock the note 2. maybe I'll try to root first and then try to unlock.. idk but i have faith in Adam and the other devs who've helped him and tested for him. I'll get it to work or die trying, because Verizon deserves that middle finger, big time.
anyway good luck on your journey!
Click to expand...
Click to collapse
It'd be easier to get a Linux boot able CD or make one than do all that...
Sent from my SCH-I605 using xda app-developers app
nosympathy said:
It'd be easier to get a Linux boot able CD or make one than do all that...
Sent from my SCH-I605 using xda app-developers app
Click to expand...
Click to collapse
yup definitely thought about that as well actually. in which i may just end up doing. is java 7 good to use with casual?
ztotherad said:
yup definitely thought about that as well actually. in which i may just end up doing. is java 7 good to use with casual?
Click to expand...
Click to collapse
That's what I have on my machine. I had no issues with casual, although that was several months ago.
It's not fair to be pissed at people who make the tools. You root at your own risk. Every post and every user will tell you that.
Sent from my SPH-L710 using xda app-developers app
WindroidApps said:
It's not fair to be pissed at people who make the tools. You root at your own risk. Every post and every user will tell you that.
Sent from my SPH-L710 using xda app-developers app
Click to expand...
Click to collapse
this is so true! you do all this crap at your own risk. and I'm willing to take this risk, and not blame the awesome devs for your problems
5w3d15h said:
that CASUAL does not work. Oh wait, let me guess, I don't have the right (1 of how many different ones suggested) usb driver, right? And I'm not in ADB, right? And I haven't tried different cables, and ports, and CADI on its own, and zadig, and usbdeview, and pulling the battery when it stalls in download mode (when CASUAL was still recognizing the phone, now neither CASUAL nor ODIN connect to it)? Sorry for the sarcasm, but I'm incredibly frustrated here. How does "one click" turn into a week of trying and trying and trying, and not only not making progress, but seemingly moving backwards where now I can't even get programs to connect? Is there something less messy, contradictory (seriously, the dev thread says "stock anything" but when trying the battery pull and reboot it goes off on me: OMFG WHAT THE HELL ARE YOU DOING? I WARNED YOU! YOU NEED TO ROOT FIRST.) way to unlock? Or a more concise thread of troubleshooting CASUAL (And please, I don't need a link to the same dev thread I just referenced, again.)?
Click to expand...
Click to collapse
I hear apple calling for thier long lost customer :good:
droidstyle said:
I hear apple calling for thier long lost customer :good:
Click to expand...
Click to collapse
that's the best line I've heard today.
If you go the Linux route, just be sure to update the lib files, as stated in the casual thread. Linux worked perfectly for me, and I am a complete noob at this stuff.
Sent from my SCH-I605 using Tapatalk 2
ztotherad said:
that's the best line I've heard today.
Click to expand...
Click to collapse
Haha sup man? Glad to see ya made the jump up to the note 2!
mcp2009 said:
Yea maybe try a different computer. I tried my laptop multiple times and it didn't work but once I did it on my surface pro it worked right away
Click to expand...
Click to collapse
ztotherad said:
definitely having the same problem, my solution: going to reinstall Windows 7 and see if that fixes my problems. if that doesn't then I'll just install a Linux distro on my computer and install java and see if i can get it to run that way. if anything I'll try it on another laptop running Windows xp or another till i get this **** to work. it honestly can't be that hard to unlock the note 2. maybe I'll try to root first and then try to unlock.. idk but i have faith in Adam and the other devs who've helped him and tested for him. I'll get it to work or die trying, because Verizon deserves that middle finger, big time.
anyway good luck on your journey!
Click to expand...
Click to collapse
Yep ive been through this to and finnally got it to work on my moms laptop. Our desktop is the only one I can use odin on and my moms laptop is the only one I can use casual on. When I have some spare time (or feel like it lol) im gonna try loading up a fresh install on windows 7 on 1 of my spare hard drives and see what happens from there. But for now im not really woried about it, just gonna roll with the flow.
Sent from my SCH-I605 using Tapatalk 2
5w3d15h said:
that CASUAL does not work. Oh wait, let me guess, I don't have the right (1 of how many different ones suggested) usb driver, right? And I'm not in ADB, right? And I haven't tried different cables, and ports, and CADI on its own, and zadig, and usbdeview, and pulling the battery when it stalls in download mode (when CASUAL was still recognizing the phone, now neither CASUAL nor ODIN connect to it)? Sorry for the sarcasm, but I'm incredibly frustrated here. How does "one click" turn into a week of trying and trying and trying, and not only not making progress, but seemingly moving backwards where now I can't even get programs to connect? Is there something less messy, contradictory (seriously, the dev thread says "stock anything" but when trying the battery pull and reboot it goes off on me: OMFG WHAT THE HELL ARE YOU DOING? I WARNED YOU! YOU NEED TO ROOT FIRST.) way to unlock? Or a more concise thread of troubleshooting CASUAL (And please, I don't need a link to the same dev thread I just referenced, again.)?
Click to expand...
Click to collapse
I feel your pain but hang in there and keep trying. It took me 3 days and several hours to find the right combination that finally worked. If you follow the dev thread for a few days, you'll see that most everyone having problems eventually gets it to work through a combination of trial and error and support from the devs.
If you haven't already, try the driver suggestions in the last several pages of the dev thread. This seems to be helping quite a few others. Another thing to try is running the Casual jar file from an admin command prompt instead of double clicking the file. This worked for me.

[Q] Well. My curiousity led to a hard-bricked phone

Well. My curiousty led to a hard-bricked phone
It's definetly official. I am not going to install any more custom roms after this. To make my story breif. I aquired a motorola atrix 2 phone, and had read it could accomdate a custom rom, so I used a one click root method program and the program said it had done its job. I booted into the recovery and installed the rom, which ended in an infinite reboot. Great, so I read more on how to revert back to firmware using rsd lite. I did this, but the battery was dead. so I went out and purchased anther battery, attempted the restore, phone restart, then BOOM. it stayed black and now it wont come on. wtf.
Can any please recommend the proper cable I have to order to get the phone back working>?
Sunaj1 said:
Well. My curiousty led to a hard-bricked phone
It's definetly official. I am not going to install any more custom roms after this. To make my story breif. I aquired a motorola atrix 2 phone, and had read it could accomdate a custom rom, so I used a one click root method program and the program said it had done its job. I booted into the recovery and installed the rom, which ended in an infinite reboot. Great, so I read more on how to revert back to firmware using rsd lite. I did this, but the battery was dead. so I went out and purchased anther battery, attempted the restore, phone restart, then BOOM. it stayed black and now it wont come on. wtf.
Can any please recommend the proper cable I have to order to get the phone back working>?
Click to expand...
Click to collapse
Did you flashed rom with stock recovery?
Sent from my Sony Tablet S using xda app-developers app
smgdev said:
Did you flashed rom with stock recovery?
Sent from my Sony Tablet S using xda app-developers app
Click to expand...
Click to collapse
Yes, I tried to. Unless i acidentally downloaded the wrong file.
Sunaj1 said:
Yes, I tried to. Unless i acidentally downloaded the wrong file.
Click to expand...
Click to collapse
You should flash roms with custom recoveries that built for your device like clockworkmod or twrp recovery.
Sent from my Sony Tablet S using xda app-developers app
smgdev said:
You should flash roms with custom recoveries that built for your device like clockworkmod or twrp recovery.
Sent from my Sony Tablet S using xda app-developers app
Click to expand...
Click to collapse
Yes, I am aware of that. The problem is now my phone is hard bricked and it wont turn on at all, not even to display an error message.
How can I fix this? whats that special cable That i need?
I would love to help you but I don't have the device and I think you should ask to your device's q/a forum. It will more helpful for you.
Sent from my Sony Tablet S using xda app-developers app
Sunaj1 said:
Well. My curiousty led to a hard-bricked phone
It's definetly official. I am not going to install any more custom roms after this. To make my story breif. I aquired a motorola atrix 2 phone, and had read it could accomdate a custom rom, so I used a one click root method program and the program said it had done its job. I booted into the recovery and installed the rom, which ended in an infinite reboot. Great, so I read more on how to revert back to firmware using rsd lite. I did this, but the battery was dead. so I went out and purchased anther battery, attempted the restore, phone restart, then BOOM. it stayed black and now it wont come on. wtf.
Can any please recommend the proper cable I have to order to get the phone back working>?
Click to expand...
Click to collapse
Hi, I guess you can use THIS LINK to try and fix your problem. Thank you for consulting the forums, and have a nice day.
ATkeneiville said:
Hi, I guess you can use THIS LINK to try and fix your problem. Thank you for consulting the forums, and have a nice day.
Click to expand...
Click to collapse
Thank you. But an experienced repair guy said my phone wasn't responding to neither the USB jtag or the fast boot. So my phone is dead forever? Should I start digging its grave?
Sure sounds this way, and you shouldn't be doing JTAG through the USB port anyway unless your phone is something special I've never heard of
But in truth rooting your phone won't damage it, it just gives someone the opportunity to do so. I'm a firm believer in rooting all androids so long as they read and understand what they are doing, its very hard to brick a phone if you know what you're doing
So although this phone may be dead forever (unless you find someone who for sure knows the proper way to JTAG it) then still consider rooting your next one, just be sure to completely understand what's going on, and try to stay away from one click roots, its hard to learn anything from this
Best of luck on your next phone
*side note, if you still have warranty and your phone is completely unresponsive chances are you will get your warranty exchange, just play dumb and say "I was playing angry birds and it just froze, now it won't turn on"
Sent from my Nexus 4 using Tapatalk 2
I wish I had warranty on this thing. I got it second hand from craigslist. However i've managed to acquire an HTC inspire 4G, what an upgrade from a motorola cliq xt! I would love to install jelly bean on this thing but after messing up the Atrix 2 i'm scared I will F*ck this one up too. I can never find clear and concise instructions on the internet. Every web page I visit, it seems to be someones personal way of doing it. Steps not mentioned, or instructions written for intermediate users. For example, Every video or piece of instruction i've watched on youtube regarding booting into the fast boot on the atrix 2, said something about holding volume up and power button upon booting and I would see something on the top of the screen. However that did not work, First I had to use the volume down and power button, then I would get to this fastboot screen where those recovery options werent available, from there I had to hold both volume buttons down and press the power button twice which would bring me to the recovery options screen. thats just one example, and even then for some reasons I didn't have all the recovery options the instructions spoke of... for example. Very annoying and frustrating. On a side note, is there anyone on this site who lives in the US that can unbrick my atrix 2? The guy who repair phones I took it to said theres a device for 250.00 bucks he's waiting to get that can unbrick any device. However he doesnt have the funds and had gotten laid off work. I am just having a hard time believing a simple soft user error could permanently damage my device forever and that as sophiscated as our technology has gotten there's absolutely no way to revive it.
demkantor said:
Sure sounds this way, and you shouldn't be doing JTAG through the USB port anyway unless your phone is something special I've never heard of
But in truth rooting your phone won't damage it, it just gives someone the opportunity to do so. I'm a firm believer in rooting all androids so long as they read and understand what they are doing, its very hard to brick a phone if you know what you're doing
So although this phone may be dead forever (unless you find someone who for sure knows the proper way to JTAG it) then still consider rooting your next one, just be sure to completely understand what's going on, and try to stay away from one click roots, its hard to learn anything from this
Best of luck on your next phone
*side note, if you still have warranty and your phone is completely unresponsive chances are you will get your warranty exchange, just play dumb and say "I was playing angry birds and it just froze, now it won't turn on"
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
I can't attest to the videos you saw, but for most androids this is the best site with the most info, I only suggest being sure how to root before you do it, and to understand how the method works as well. When your not understanding this is when bricks happen.
I know it can be lots of reading and lots of questions but in the long run its worth the time
As for the JTAG equipment there are many who have it and you can easily spend less than 250 on getting the proper stuff.
Every logicboard is different so maybe this machine he speaks of has a wide variety of cables that come with it, but he's still paying too much
Anyway, most people seem to charge 50$ or so to JTAG it back, if that's more than the phone is worth to you just sell it on eBay for parts
Sent from my Nexus 4 using Tapatalk 2
demkantor said:
I can't attest to the videos you saw, but for most androids this is the best site with the most info, I only suggest being sure how to root before you do it, and to understand how the method works as well. When your not understanding this is when bricks happen.
I know it can be lots of reading and lots of questions but in the long run its worth the time
As for the JTAG equipment there are many who have it and you can easily spend less than 250 on getting the proper stuff.
Every logicboard is different so maybe this machine he speaks of has a wide variety of cables that come with it, but he's still paying too much
Anyway, most people seem to charge 50$ or so to JTAG it back, if that's more than the phone is worth to you just sell it on eBay for parts
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
Can you link me to clear and concise instructions on how to upgrade my 2.3.7 ( i think) to jellybean on an htc inspire 4g? and is there anyone here who can fix my phone that you know of?
HERE IS YOUR PHONES FORUM
you will find links to all the guides you need here, always read the stickies in each section, this tends to have the important info you need
then anything your not sure about should be asked in the proper place within this forum for the best answers
example, question on how to root should be asked in the how to root thread for best chance of a good answer, question on how to flash a new radio should be asked in a thread pertaining to this
im sorry but i dont know enough about your phone specificly to help further but hopefully the members in your device specific forum will
best of luck!

Categories

Resources