I bought a cheap A-13 MID of the internet and flashed a firmware for another variant common problem with these devices so i have no touchscreen and the usb has snapped of tried soldering it but was unsuccessful
I have recovery installed but only way i can use it is through novotools but need touch screen
So i need a way to flash firmware through sdcard on boot (Can be done, can't find guide though)
Or a script that will run reboot-recovery.sh on boot from sd or maybe emmc
Or that will run when the sd is mounted so that if i insert an sd card into the device with reboot-recovery.sh script on it it will reboot to recovery
Must be a way to fix this
Neurom707 said:
I bought a cheap A-13 MID of the internet and flashed a firmware for another variant common problem with these devices so i have no touchscreen and the usb has snapped of tried soldering it but was unsuccessful
I have recovery installed but only way i can use it is through novotools but need touch screen
So i need a way to flash firmware through sdcard on boot (Can be done, can't find guide though)
Or a script that will run reboot-recovery.sh on boot from sd or maybe emmc
Or that will run when the sd is mounted so that if i insert an sd card into the device with reboot-recovery.sh script on it it will reboot to recovery
Must be a way to fix this
Click to expand...
Click to collapse
Uppp
Related
Hi, I'm looking for original recovery image for folio so i can return my folio for warranty repair due to the "damaged internal storage" and SD card not detected problem. Other people have that problem but no one got a solution.
There was only one link from dexter
but it does not work for me (maybe due to sd card not correctly detected? sd card can be detected for some other mod though). Also when i open the zip file i notice the files types and location in the "folio stock image" is different from the mod that works on my folio.
Someone seems to have a Folio Original Recovery(apply via recovery).....how to do that actually?
Can it be fixed by fastboot (never done this and not sure what it is about actually) as done here http://forum.xda-developers.com/showthread.php?t=1012980#12482544
http://bb2k.org/folio100wiki/index.php/FolioMod_Issues#Internal_storage_give_problems_.2F_no_enough_space_.2F_internal_storage_results_damaged
If you have sd damage or something like that it must be the mbr .At the end of lost partition method 2 , use this file mbr.mbr inside zip http://www.box.net/shared/suinl2fzqb63jkqaispj with adb
Hope this can help you but you need to install sdk and adb shell on you computer with the correct folio driver to connect your tablet in fastboot
Warning if you re not sure of what you do you should not do this but if it "bricked" it Will not be worst
if you are with Windows seven sometimes it s hard to install proper driver for folio try to use pdanet to do that if you still have waiting for device in adb shell
I previously had an android revolution hd rom installed, which i love... but due to some tinkering it no longer boots, it's stuck on the htc one loading screen.
However I also deleted that rom off the internal memory, which comes under the directory of "sdcard" even though the htc one doesn't have one.
This means I can't reinstall from the rom zip.
I have an updated version of android revolution, but how do i get it onto my phones internal memory?
After doing some googling , I came up with information about sideload, but because adb doesn't detect my device via clockwork mod recovery I don't think I can proceed.
Adb does however detect the device while it's on the stuck htc one loading screen. I think probably sideload isn't an option from this point?
Do i have to use adp push command?
God i wish htc one had an sd memory card, this wouldn't be a problem.
On a side note i have a device which allows me to insert a usb pen drive via the micro usb slot (which i can easily put a rom onto)
is that a viable way of performing the installation?
Really desperate for any help here, am a a loss why sideload isn't working from clockwork mod recovery.
pontypool said:
I previously had an android revolution hd rom installed, which i love... but due to some tinkering it no longer boots, it's stuck on the htc one loading screen.
However I also deleted that rom off the internal memory, which comes under the directory of "sdcard" even though the htc one doesn't have one.
This means I can't reinstall from the rom zip.
I have an updated version of android revolution, but how do i get it onto my phones internal memory?
After doing some googling , I came up with information about sideload, but because adb doesn't detect my device via clockwork mod recovery I don't think I can proceed.
Adb does however detect the device while it's on the stuck htc one loading screen. I think probably sideload isn't an option from this point?
Do i have to use adp push command?
God i wish htc one had an sd memory card, this wouldn't be a problem.
On a side note i have a device which allows me to insert a usb pen drive via the micro usb slot (which i can easily put a rom onto)
is that a viable way of performing the installation?
Really desperate for any help here, am a a loss why sideload isn't working from clockwork mod recovery.
Click to expand...
Click to collapse
it's really easy to load the rom from the usb otg cable
your going to need the newest version of TWRP recovery if you want the new ARHD
Flash TWRP
reboot after plugging in the usb otg
from TWRP choose install
where is says Storage: Click it and choose USB OTG
hit back hit install theirs your rom Flash and enjoy.
but you'll still need to flush the cache ( From you other Post )
fastboot erase cache
I have a weird one. I have rebuilt my Nook and followed the directions about how to make the SDcard active, the flag is correct and everything. It will load the loader if I power it on via a powered USB cable but when I try to power it off and back on without the cable, it goes directly into the original nook tablet OS. Any suggestions on how to fix this issue?
flyboynm said:
I have a weird one. I have rebuilt my Nook and followed the directions about how to make the SDcard active, the flag is correct and everything. It will load the loader if I power it on via a powered USB cable but when I try to power it off and back on without the cable, it goes directly into the original nook tablet OS. Any suggestions on how to fix this issue?
Click to expand...
Click to collapse
You're not the only one. This seems to be a common issue between newer (or was it older?) model Nooks.
sagirfahmid3 said:
You're not the only one. This seems to be a common issue between newer (or was it older?) model Nooks.
Click to expand...
Click to collapse
On my previous build - Cyanomod 10 - Jelly Bean, I didn't have this issue. I just lost that memory card and tried it again and get the boot issue.
flyboynm said:
On my previous build - Cyanomod 10 - Jelly Bean, I didn't have this issue. I just lost that memory card and tried it again and get the boot issue.
Click to expand...
Click to collapse
now it seems u know the steps already but im reposting in case u missed something.....i had the same problem. i found that some NT's only respond to this exact file that i will provide. use my files in this step and get back to me. REMEMBER TO READ ALL STEPS I PROVIDED IN CASE U FORGOT SOMETHING
step1- download (https://www.mediafire.com/folder/dd1cwv3uw0u18/NOOK TABLET) <<-----sdboot.zip and cwm.zip
step2-download minitool partition wizzy
step3-put sd card into computer
step4-using minitool, delete partition, create partition (make primary, and fat32), right click on sd card (usually F set flag to active and change partition ID type to 0x0c fat32lba and then click apply. (IN THAT ORDER)
step5-once parted copy from the sdboot attatchment provided to sd card, the recovery.img, MLO,flashing_boot, and u-boot. Also put the cwm emmc.zip provided as well into sdcard.
step6-put sd into nook, MAKE SURE NOOK OFF BEFORE U PUT IT IN OR U WILL HAVE TO DO IT ALL OVER AGAIN, then plug nook into computer via usb cord, be patient and wait for nook to boot, once it finally boots, U MUST BE VERY QUICK AND PRESS "N" THE SECOND CYANOBOOT POPS UP, GO TO SDC RECOVERY NOT INTERNAL RECOVERY. that will load up sd cwm, once it is up it will now let u install the cwm i provided. install it.
step7-once this is done unplug it from comp, turn off, and repeat steps 3-6 (BUT THIS TIME ADD THE CYANOGENMOD 10.+ YOU WANT TO USE IN THE SD CARD AS WELL ALONG WITH THE CORRECT GAPPS) once sd cyanoboot pops up choose internal recovery instead of sdc recovery. install cm10+, gapps, and the internal cwm emmc.zip i gave u as well for good measure.
step8- once done take out sd card and reboot regularly with/without usb doesnt matter. u should be good...........it seems like alot but its actually rly fast when u got the hang of it.
Problem - I have a Onda tablet V719 that has its pattern locked. I don't know the pattern to unlock, nor do I remember the google account information to unlock it. USB debugging is NOT turned on so I cannot reach it via ADB, and it's not setup as a disk drive so simply attaching to a PC isn't a solution either.
Possible Solution - After lots of research, I've found a possible solution where I A - Mount and storage>> Mount Everything>> Mount System>> Mount data>>Mount afs>>Mount Preload>>Mount SDcard>> Mount ExternalSD>> go back>> Install zip from SDcard>>Choose zip from external SDcard and install Aromafm in Android System Recovery.
Reason the above is not working - I've downloaded each file, placed them on a micro SD card via an adapter, and put them into the phone. After booting into the recovery console and going to the Update via SD Card option, I do not see any of the files on the SD card. I've gone as far as to boot the phone into recovery without the SD card installed and I literally see the same data. in short - I cannot get the SD card files to show up in the recovery console (this is a stupid problem to have and I'm hoping I'm just missing something).
Hello, I rooted my ICOO iCou D70G2 and managed to softbrick it into a loop at the Android messages. I bought another, identical tablet, and would now like to clone the new one into the old. I would very much appreciate complete, newbie level instructions on how this can be done.
Here is what I have tried so far.
I looked for a stock ROM for this device, but can't find one. The closest out there I could locate is for a D70Pro II. I don't know if it will work, and in any case, I still can't figure out how to flash the old tablet.
The old tablet does go into recovery mode using vol up and power. I tried putting the Pro II flash on the micro sd card (tried both img and zip, separate times), but the tablet isn't seeing the micro sd card in recovery mode with the update from sd card option. It shows a folder /sdcard with some seemingly empty subfolders, but even if I take out the micro sd card it shows the same set of folders and says choose a package.
I tried using the Intel USB drivers with adb, but the device isn't recognized in recovery mode by adb. Rockchip Batch Tools 1.8 also doesn't see the device, although it seems to load the ProII img file correctly.
It would be really great to get this old tablet to work. I don't have any CWM, TWRP or any other backup software on either device at this point. The new device is new from the box and not rooted.