My phone mess up with Caller ID's. Caller ID match should be 9 instead 7. I have two numbers in my contacts which are exactly same but the operator indicator is different for example 0400123456 and 0500123456.
For example Call Recorder works fine but phone and SMS doesn't work properly.
In the file "/sytem/build.prop" I can add the “ro.phone.min_match=9”. But does this work with the HTC Sense...?
In the build.prop file also includes following lines:
ro.phone.min_match.HTC_Y13=7
ro.phone.min_match.HTC_J15=7
ro.phone.min_match.HTC_016=7
What these three settings means...?
How I can correctly tweak my phone that Caller ID is recognized with 9 digits...?
Related
Can anyone explain why when I recieve incoming calls, my XDA doesn't match numbers to contacts and displays names instead of just a number?
I believe that you need to ensure you are running the latest ROM & Radio Stack.
Also your contacts must be prefixed with +44 so it can do a full number match.
My contacts were all prefixed with +44..number
But when I dialed a contact, it would not dial. Once I removed the +44 it worked.
So the question is how can it display a contact name when I have taken away this prefix?
Primed
Hi guys,
One other odd thing I have noticed is that if you put a - in the number, i.e 07801-12345 it does not always match the caller and says it is unknown number.
Does any one have any ideas?
I am running the XDA Dev Rom.
Thanks, Gil.
i've noticed that sms complete there names when i put the country code and everything in the contact and incomeing calls complete when i have only the area code and the phone number. this is realy anoying
Try this patch from Paragon Software http://www.penreader.com/PocketPC/SMS_Name.html
which fixes all SMS2Name confilcts ... and voice calls (if the caller uses their mobile number).
But, there seems to be varying degrees of success downloading this patch.
If you cannot download the patch, let me know I have the original source code..which works great.
PS: Upgrade to PPC 2003 which has this fix built in ! :shock:
in what format will everything need to be in to work with this new tool?
as i think that that fancy nice looking dialer program that comes in the dev's rom needs them without country code.
Hi Everyone,
Quite a number of people, especially in Europe are experiencing caller id issues on the HTC Mozart, and some other HTC devices with WP7 (I can only be sure of the Mozart though). The issue is decsribed by many people here:
answers.microsoft.com/en-us/winphone/forum/wp7-wppeople/htc-trophy-caller-id-problem/90c3b4d2-b558-4e6e-aa91-2530285f302f
Basically, I have my Mozart getting the contacts from my Exchange mailbox via sychronisation. All the contacts are stored with the international prefix (+356 for Malta, +44 for UK etc. etc.) to have everything working while local or roaming. Everything works ok except caller ID. SMS are recognised with no exception while calls are not recognised, at least not all of them.
Depending on which provider the caller is, numbers sometimes come in with the international prefix and sometimes they are not (depending on the local provider the caller is subscribed to). Basically the Mozart does not recognise the caller ID if it does not find an EXACT match in the address book. Eg. If the call comes in with +356 123456 the caller is recognised, if the call comes in with 123456, it is not. SMS is not affected by this issue. All SMS are recognised as they all come in with the prefix.
And there is no workaround as if I remove the prefix from my contacts, the SMS will start not to be recognised.
In brief, the Mozart does not strip the international prefix or have some condition to recognise the number if it is not a perfect match (including the prefix). I did not see any mention on this in these forums, but have seen it elsewhere, and for sure it is a problem which affects some Mozart owners depending on their provider.
Have contacted HTC and and after some useless replies, I received silence.
After debranding my T-mobile Mozart, and running the RUU_Mozart_HTC_Europe_1.30.401.01_5.54.09.21_22.33 b.50, the problem remained exactly the same as before.
The same SIM card in my Mozart works ok on a Galaxy S of a friend or an old Nokia feature phone, so the issue is specific to the Mozart.
Can anyone provide any insight? Is anyone experiencing the same problem?
Thanks,
Stefan
Exactly the same here, I also debranded the same way and the problem remains the same.
I saw in some other forum that there should be a way to change a parameter in the registry to limit the lookup to the last 8 digits, which would fix it for me. Is there a way to do this on a Mozart?
quax 0815
I used hack from this thread http://forum.xda-developers.com/showthread.php?t=907971
look for -Caller ID issue fix in the first post.
I had the problem of having to save both numbers with and without the country code. (Country code for SMS, and no country code for calls).
Works like a charm My country code has three digits. If it doesent work try tweaking the number in registry hack.
the ultimate resolution
1- go to the following address to download registry editor:
touchxperience
.com
/en/applications/viewcategory/3.html
choose the file: Registry Editor Version:0.9 by checking the box next to it then click on download.
2-copy the downloaded file to your phone (probably to the storage card) and then install it.
3-go to applications and open the new application: Registry Editor.
4-go to the following:
HKEY_CURRENT_USER
then
ControlPanel
then
Phone
then
CallIDMatch
then choose the type to be " dword " and change the value to " 7 "
5- finally soft reset you phone or turn it off then on and BANG!
enjoy
How do you copy the downloaded file to the WP7 device?
Hi,
In my country, all phone numbers have 8 digits. The caller ID presented for incoming calls is only those 8 digits, i.e. xxxx xxxx
The 'sender' for incoming SMSes is the full number including country code i.e. +yyy xxxx xxxx
For some android devices (including the one I already have, Sharp Sh7218U) the dialer won't look up the incoming caller name in contacts, because it doesn't match completely - the number stored in contacts is +yyy xxxx xxxx but as sent by telco xxxx xxxx.
The only solution is to add each number to contacts twice - both with and without the country code.
Some other android devices manage to look the number up anyway - I guess they match only the last 8 digits?
Can anyone tell me what the Galaxy S 2 does, and if it checks to make sure all the numbers match, can this be fixed with an alternate ROM?
Erh, my Galaxy S2 has no problem with numbers with the country code and without. If it's stored with +316 or 00316 or not doesn't matter at all.
I'm using Cognition Rom.
No problems for me either
Australia - Vodafone.
Using VillianRom 2.3.0
prodygee said:
Erh, my Galaxy S2 has no problem with numbers with the country code and without. If it's stored with +316 or 00316 or not doesn't matter at all.
I'm using Cognition Rom.
Click to expand...
Click to collapse
It works (i.e. the caller ID shows up) if you have a number stored in your contacts both with and without the country code? How many numbers is the local part (everything apart from the country code) there?
Do you know if your network sends the full number (incl country code) when a person calls or just the local part?
Sorry for all the questions but I want to make sure!
Thanks
[Q] Caller ID for incoming call display unknow number even thought it is in contact list
Device HTC ARIA running android 2.3.3
I have one contact, whose home number is 123456789 and work nunber is set to 18005551212 x4500.
When contact call from home, on my cell it display cantact's photo and name
but when contact call from his work it display no picture, unknown name and correct phone number.
if i remove his extention then when contact call from work it display ok.
I know it is not possible to put X in phone number filed but I setup number in google contact Web GUI and sync my phone in that case display number as 18005551212 x4500
Is there any way to store extension per number in such a way that it display correct contact.
Hello,
I'm facing the following problem: My Android based (Gingerbread) smartphone has a number of contacts with several phone numbers (home, work, mobile etc.) for each. When I call a contact the call goes through the mobile operator and I'm charged for the call by him.
I also have an an Asterisk-based PBX with a FCT (Fixed Cellular Terminal, or GSM Dialer or Fixed Wireless Terminal) connected to a VOIP provider that charges much less. If I prefix a phone number in Contacts with a fixed string (containing the mobile number to the SIM card in the FCT, plus some pause, plus the password to access the PBX's dial tone plus a bit more of pause) it works fine.
What I'm looking for is a way to have this standard prefix string stored somewhere and it be automatically padded at the beginning of each number dialed. Ideally, when dialing a contact I would be asked if I wanted to call with or without the standard prefix.
Is that doable?
All help is very much appreciated.
Nikolas
After further searching I've come across an app found on Android Market called Prefixer, by 253below.com. It does everything I want and much more. Maybe this info will help some one else looking for this.
Hello
I need a little help please...
i have configured the follow rule für incoming calls:
When numbers matches:
\+49535111222.*
remove characters:
\+49535111
Add number to call log:
prefixer number
other preferences are default.
i will like to see the 222 at a incoming call on the calling sreen, but i dont see it.
In the call log is the correct number 222, but dont on the calling sreen, there is only the android calling number with all caracters
Tobi
Hi Tobi,
I'm afraid I can't help with your problem as I've only used Prefixer for padding a prefix to outgoing calls, according to filters. However, they have a forum running at the developer's site (253below.com) and you should be able to have your questions replied there.