Related
Bit of a noob question here, as my ADB proficiency is a bit lacking... In the sticky titled "Return to stock properly and safely" the instructions refer to pushing a file called "misc.img," however, when I attempt this, it obviously finds no file with that title. I've downloaded the two files from the post and tried them both on the root of my drive and in the tools folder of the SDK, but with no luck. I'd like to unroot for the time being to compare rooted performance to stock performance (i'm sure I'll end up rooting again before long... I bore easily!) Any input from the pros would be welcome! Thanks!
I'm pretty sure you can just slap on the pg05 img onto your sd card, reboot into stock recovery and let it load..
Sent from my ADR6400L using XDA Premium App
royolpunk said:
I'm pretty sure you can just slap on the pg05 img onto your sd card, reboot into stock recovery and let it load..
Sent from my ADR6400L using XDA Premium App
Click to expand...
Click to collapse
Yes you can, did it, done it, it worked.
gatorhater73 said:
Bit of a noob question here, as my ADB proficiency is a bit lacking... In the sticky titled "Return to stock properly and safely" the instructions refer to pushing a file called "misc.img," however, when I attempt this, it obviously finds no file with that title. I've downloaded the two files from the post and tried them both on the root of my drive and in the tools folder of the SDK, but with no luck. I'd like to unroot for the time being to compare rooted performance to stock performance (i'm sure I'll end up rooting again before long... I bore easily!) Any input from the pros would be welcome! Thanks!
Click to expand...
Click to collapse
sounds like you dont have your path set correctly if you placed it in the tools folder and it didn't push You could manually cd your sdcard or whichever location the misc.img file is placed in to push it if your path IS set correctly and I'm overlooking something...
you have to extract the misc file to your tools file
Sent from my ADR6400L using XDA App
While attempting to modify my wpa_supplicant in /system/app (not by any process listed here) I somehow managed to completely destroy my /system partition. Not a single file was left alive. My nook did not particularly like this, and now will not boot. I had installed cwm recovery through indirect's app, and cwm won't flash either of Barnes and noble's update zips for some reason. My question is, does anybody have a cwm compatible zip that will restore my /system, or can anyone point me to information on how to make one? Cwm's scripting language seems to be poorly documented, if documented at all. Thank you in advanced for any help! I worked on this for several days before posting.
Sent from my MB860 using xda premium
Have you tried with adb? If not then you haven't try it all.
Get in CWM and plug your device to the machine you used for root or working nook drivers, in CWM mount /system, take the \system folder of the acclaim_update.zip(unzip it) and put it in C:\ntroot ( where adb should be) , cut \system\bin folder and put it outside so it will look like this C:\ntroot\bin, open CMD as administrator and run
>cd C:\ntroot
> adb devices (Check if your device really gets recognized)
> adb push bin /system/bin ( it will push all the files inside bin folder to /system/bin and override them)
Repeat the process with the other folders.
Wish you luck!
PS: if you have CWM backup you could even unpack system.img is easy but you need linux ubuntu is fine so you use your own modified tweaked and working system.
~ Veronica
Sent from XDA premium using my Nook Tablet
Thank you, I didn't know adb could push entire folders! I would still like to learn how to make flashable zips, though. Should I just read the source code or something? I really cannot find any documentation.
Sent from my MB860 using xda premium
Zapcorns said:
Thank you, I didn't know adb could push entire folders! I would still like to learn how to make flashable zips, though. Should I just read the source code or something? I really cannot find any documentation.
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
Pm celticwebsolutions user he just learned how to make flashable zips so he must have the documentation, I will look into it this week. Let me low if you managed to fix your nook.
~Veronica
Sent from XDA premium using my Nook Tablet
http://forum.xda-developers.com/showthread.php?t=1187313
http://www.freeyourandroid.com/guide/introdution_to_edify
http://blog.coralic.nl/2010/01/25/how-to-create-update-zip-using-your-build-aka-system-img/
A cwm flashable zip must have a META-INF directory and whatever you're loading with a structure like below:
/META-INF
-/com
--/google
---/android
----/update-binary (file)
----/updater-script (file)
/system (or whatever you're loading)
'updater-script' uses the edify script language to mount, copy, set permissions, etc. Make sure this is in unix formatted text and not dos/win. Some CWM versions dislike dos/win formatted text. May as well make sure it's unix to avoid any issues.
You can just pull 'update-binary' from any flashable zip for the NT.
Once the zip is created you need to sign it, but CWM can be set to ignore that.
Just look at other cwm installable zips for examples.
http://downloads.androidsu.com/superuser/
http://forum.xda-developers.com/showthread.php?t=1458452
Igthorn said:
http://forum.xda-developers.com/showthread.php?t=1187313
http://www.freeyourandroid.com/guide/introdution_to_edify
http://blog.coralic.nl/2010/01/25/how-to-create-update-zip-using-your-build-aka-system-img/
A cwm flashable zip must have a META-INF directory and whatever you're loading with a structure like below:
/META-INF
-/com
--/google
---/android
----/update-binary (file)
----/updater-script (file)
/system (or whatever you're loading)
'updater-script' uses the edify script language to mount, copy, set permissions, etc. Make sure this is in unix formatted text and not dos/win. Some CWM versions dislike dos/win formatted text. May as well make sure it's unix to avoid any issues.
You can just pull 'update-binary' from any flashable zip for the NT.
Once the zip is created you need to sign it, but CWM can be set to ignore that.
Just look at other cwm installable zips for examples.
http://downloads.androidsu.com/superuser/
http://forum.xda-developers.com/showthread.php?t=1458452
Click to expand...
Click to collapse
lol now i realized i've always played with the tools for make this but i have never used them to create update.zip's or flashable zips just to extract .img files and sign them lmao, i have made a tutorial about this in other forum toowhich will be posting here too, for now i leave the tools i used like unyaffs, etc which are needed and will make your life easier.
IMG_tools.zip
And this is the tutorial, just some more reference
~ Veronica
Good news, I just managed to make it fail to boot at a different point. That's not much, but its progress. Does anyone have any ideas? I did successfully restore /system (I think) so I don't know why I'd won't boot.
Sent from my MB860 using xda premium
Zapcorns said:
Good news, I just managed to make it fail to boot at a different point. That's not much, but its progress. Does anyone have any ideas? I did successfully restore /system (I think) so I don't know why I'd won't boot.
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
unmount system, wipe cache, advanced> wipe dalvik cache, fix permissions in CWM try that and give more details of its status.
~ Veronica
Zapcorns said:
While attempting to modify my wpa_supplicant in /system/app (not by any process listed here) I somehow managed to completely destroy my /system partition. Not a single file was left alive. My nook did not particularly like this, and now will not boot. I had installed cwm recovery through indirect's app, and cwm won't flash either of Barnes and noble's update zips for some reason. My question is, does anybody have a cwm compatible zip that will restore my /system, or can anyone point me to information on how to make one? Cwm's scripting language seems to be poorly documented, if documented at all. Thank you in advanced for any help! I worked on this for several days before posting.
Sent from my MB860 using xda premium
Click to expand...
Click to collapse
find any CW flashable zip, get the 1.4 acclaim zip, copy all content from acclaim zip, EXCEPT META folder, to the CW zip, and put the CW zip, overwrite if it asked, you just produced on SD and flash it win recovery. You will need to re-root.
So, I managed to do the same thing...not to ask for help or anything but can someone provide a link to a CW zip that can get me back to square one?
I was finally able to fix it! Using Cobrato's flashable zip in the developer forum, i was able to flash a working system. It even included many of the apps i had been using before not available on the market. Thank you for all youre help.
Sent from my BNTV250 using xda premium
Zapcorns said:
I was finally able to fix it! Using Cobrato's flashable zip in the developer forum, i was able to flash a working system. It even included many of the apps i had been using before not available on the market. Thank you for all youre help.
Sent from my BNTV250 using xda premium
Click to expand...
Click to collapse
Great News!
Please update your OP title.
And link to the file that fixed it. I'm sure one of us other n00bs will do the same.
Sent from my PG06100 using xda premium
Heric1 was in the same situation but i gave him a link that i found in development with 1.4.0 stock ROM with indirect and cfoesch root methods and it worked ill post this links in My FAQ. Development should have the thread that was created to index all the ROMS updated and stickied
http://forum.xda-developers.com/showpost.php?p=21748940&postcount=57
~ Veronica
Sent from XDA premium using my Nook Tablet
Greetings everyone!
New *registered* user here! I've been frantically sifting through post after post on the forums all night hoping to get some help with an issue I am having on my Vibrant.
Goal:
Remove some bloatware ONLY, not looking to install any ROMs or modify the phone too much...just clean some annoying apps and icons off.
Phone Information:
Model SGH-T959
Firmware 2.2
Baseband T959UVKB5
Kernel 2.6.32.9
Build FROYO.UVKB5
I currently have the latest version of Java, Android SDK, and SuperOneClick installed.
Install directory of AndroidSDK:
C:\AndroidSDK
My method of failure:
Open SuperOneClick, Click "Root"
Start, Run, "CMD"
cd c:\AndroidSDK\tools
adb shell
mount -o rw,remount /dev/block/st19/system
This is where it fails and I run into an endless loop of it telling me the proper usage of the "mount" command. I thought I had it at one point but when I typed: rm /system/AmazonMp3.apk all it did was tell me that it was a read-only file and that it couldn't be deleted.
Can someone help lead me in the right direction of what I am doing wrong? I rooted and removed all bloatware about a year ago but I just did an upgrade through MiniKies to the latest version of firmware and I can't seem to remember the process I went through that long ago to get it done right.
I apologize for possibly asking a question that has been asked numerous times but I just couldn't seem to get the wording right to get any helpful results in the search of the forums. Thank you so much for the time in reading this and the future help if any can be provided. Have a great night!!!
It looks like you are in the wrong directory. Open a command prompt in
C:\AndroidSDK\platform-tools
Open the platform tools folder. Click on a blank space > hold down the shift key > hit right click > select open command window here. Then enter the commands:
adb devices "to check if your device is connected. also make sure usb debugging is enabled on your phone.
adb remount
adb shell
su
mount -o remount,rw -t rfs /dev/stl5 /system
rm -r /system/app/[AppName].apk
If you want a list of all your /system/apps enter this command
cd /system/app
ls *.apk
This is much easier if you download rom toolbox from the market. All you do is go to /system/app and delete whatever bloatware you dont want.
BUT BE EXTREMELY CAREFUL WHEN DELETING SYSTEM APPS. ONLY DELETE WHAT YOU KNOW IS BLOATWARE OTHERWISE YOU WILL GET FC'S
good luck
Would I still need to follow the steps prior to that and use SuperOneClick to root the device or do I just skip that process and go straight to the cmd prompt?
Also, I followed a tutorial I found for installing the Android SDK that informed me to copy all the files from android-tools to the tools directory and use that instead but I don't know what the use in that is except for maybe a smaller directory name?
EDIT: I tried what you said with and with using SuperOneClick prior to the procedure and the cmd prompt displayed the following text:
*opened cmd promt in C:\AndroidSDK\tools (no files in platform-tools anymore)*
adb devices (it found my device connected)
adb remount (adb remount: no such file or directory exists)
The adb shell and su commands works fine BUT I still hit the endless loop of it trying to explain to me the "usage" of the mount command.
I will look into Rom toolbox as I'm trying to figure this out as well. Thank you.
I strongly recommend you download root explorer or some similar root browser app. Of course though your phone must be rooted. Just try rom toolbox. It has its own root browser within the app along with other useful features. This is probably the easiest way to uninstall the bloatware in your case since you are having issues with adb.
Sent from my Galaxy Nexus using XDA
Thank you!
Okay, I have the suggested "rom toolbox" downloaded from the market and I will try to use that but SuperOneClick does not root the phone deep enough for rom toolbox to see the phone as rooted so...will the "updated.zip" method work for this instead?
I haven't tried it before but I am willing to give it a go if you think it's the best method. If this is the method you recommend, would you happen to have a link to the most recent or atleast most trusted updated.zip rooting method?
CScrivener said:
Thank you!
Okay, I have the suggested "rom toolbox" downloaded from the market and I will try to use that but SuperOneClick does not root the phone deep enough for rom toolbox to see the phone as rooted so...will the "updated.zip" method work for this instead?
I haven't tried it before but I am willing to give it a go if you think it's the best method. If this is the method you recommend, would you happen to have a link to the most recent or atleast most trusted updated.zip rooting method?
Click to expand...
Click to collapse
You can try rooting your phone using this toolbox.
http://forum.xda-developers.com/showthread.php?t=954509
If that does not work for you i will try and find the link to the "one click root program" i use all the time.
Here is an excellent guide to root.
http://forum.xda-developers.com/showthread.php?t=849028
Sent from my Galaxy Nexus using XDA
Here is the program i use. Just remember to have usb debugging enabled on your phone. It really cant get any easier than this.
http://forum.xda-developers.com/showthread.php?t=739300
Sent from my Galaxy Nexus using XDA
So I downloaded the one click program you suggested and the program itself seems to bee pretty straight forward.
I connected phone to computer with debugging on. Opened program and hit one click root. It started doing it's thing...phone rebooted and went into recovery. I started to follow instructions up until I got to where it said install packages. When I clicked it, the phone said installation failed no such file our directory exists.
The phone is looking for the updated.zip file but none exists in the one click folder. There is a root.zip and an unroot.zip...do I need to rename one of them to proceed???
Thank you so much for all the help so far, I feel like I'm so close but just not there yet. You have been an incredible help!
Sent from my SGH-T959 using XDA
CScrivener said:
The phone is looking for the updated.zip file but none exists in the one click folder. There is a root.zip and an unroot.zip...do I need to rename one of them to proceed???
Click to expand...
Click to collapse
The way (Stock) Recovery works is if you are not "Install from SD" then it will look for the file labeled Update.zip. So you can rename only the Root.zip to Update.zip and make sure that is the only thing on your internal SD labeled that or with .zip Put the unroot.zip in a folder for now. Then try again.
Alright, will give that a try when I get home. I thought I read that the program copied the update.zip file to the phone during it's process so I didn't want to do anything to work against that. I will rename one of the files, copy it to the phone and give the one click root another shot. Thank you!
Sent from my SGH-T959 using XDA
CScrivener said:
Alright, will give that a try when I get home. I thought I read that the program copied the update.zip file to the phone during it's process so I didn't want to do anything to work against that. I will rename one of the files, copy it to the phone and give the one click root another shot. Thank you!
Sent from my SGH-T959 using XDA
Click to expand...
Click to collapse
There is no need to rename anything. The program does it all for you. Play close attention to the first screen (green one) if it says update.zip copied successfully it will then reboot your phone to stock recovery. Once you are in stock recovery all you do is click reinstall packages. Keep clicking reinstall packages even if it reboots the first time. To prove my point mount your phone to your pc and check to see if the update.zip is copied onto the root of your into storage. If not well copy the update.zip from the last guide i suggested from above.
Also check to see if the superuser app is installed on your phone. The program also installs that along with the update.zip. If you have superuser then go to the market download rom manager so you could download CWM.
Sent from my Galaxy Nexus using XDA
Alright, so I tried it again once I got home. Didn't work BUT I did see that update.zip was installed into my phone. The sig verification failed, which means I need to change recovery versions to the one that skips sig verification correct?
I'll go search the forums for that since I remember seeing that a little while ago but that is the correct path I need to take at this point in time am I right?
Thank you so much! Big big help!
You can pull the CWR from my signature. Same as before. Put it on your internal labeled update.zip, boot into recovery and and scroll down to Reinstall Packages. Hit it. It will cycle and probably come back to stock recovery. Hit Reinstall Packages again and the stock recovery will go from blue to green (CWR).
Side note, probably from there you will be able to install the Superuser update.zip. Just go to Install from SD card and find it and hit it. The reboot. Might not but the CWR instructions above shoudl work for you.
Well I changed the recovery version using the file from http://forum.xda-developers.com/showthread.php?t=833423 and then used the OneClickRoot and was able to get the update installed (I think). The phone booted up normally, I noticed that SU Permissions was installed so I figure I am rooted correct? WRONG. Rom toolbox says I am not. Is there another way to verify? Should I reinstall Rom toolbox incase it's just bugging out on me?
So I tried using Rom Manager too. Looks as tho SU is not installed correctly, will have to try again I guess.
Cannot install CWR, tried and the recovery text stays blue even after 14 times of reinstalling packages...
This phone will be sent flying across the room sometime tonight I'm guessing. About to erase the entire thing and try starting from scratch again. (Start from Eclair and work my way up maybe)
If you are willing to start from Eclair it would be soooo much easier that all this stuff.
Odin to stock, flash CWR from my signature, go from blue to green and then flash Fishman's Bionix and you are good to go. Simple and way easier than all this mess. Just download Fish's and put it on you SD card somewhere you'll remember. Once in green recovery just scroll to that ROM and flash it per OP.
We've just been trying to Root you since on your OP you said you didn't want to flash a custom ROM.
Well...I'm still trying to avoid flashing Roms (I've upgraded through MiniKies and that's it).
I've only been trying to root just to clean bloatware off but it seems that I must be lacking the technical skills to follow instrcutions properly....nothing is cooperating and even after following all steps nothing wants to work like it should.
Grrrr! One last try to get CWR working before I lose my mind and need to take a break/walk away for a bit.
Ok, so I'm currently back to stock Eclair (ew!!) and about to boot to recovery to install CWR. Wish me luck on that one....
Wooo, CWR up and running! Now I just have to work on a flash maybe or whatever steps were suggested next...I might try the ROM you suggested.
The ROM gets placed on external sdcard and installed from within CWR correct?
Do most ROMs remove bloatware and useless apps?
Yes and are pre-Rooted. Put the ROM.zip on either card. I have a folder that I use. Boot into recovery and get green recovery back. Go to install from SD, find the ROM and flash it per the OP instructions.
Bloat free, pre-Rooted and usually has Voodoo so you can get Voodoo Sound from the market and have a sonic ear-gasm.
Just wanted to say thanks for all the help! I installed the suggested ROM last night and I am very happy with the results thus far. It was alot easier than I thought it would be. Flashing a ROM was MUCH more simpler than the root only decision. Thank you again!
Hello to all, i came from Malaysia and i just got my GT-P7500, done fashing to ICS 4.0.4 running XXLQ8 stock ICS with Kernel 3.1.10..
I tried rebooting into stock recovery mode, when i choose to update flash from external storage, the system is telling me that E:/ volume not found,
/sdcard notfound.. Can somebody or anybody explain this and explain to me how to flash update..
Do i need another recovery mod or can i do it with the original stock recovery mod??
how come my post is not replied?
Someone pliss help me..
dauzcroz93 said:
how come my post is not replied?
Someone pliss help me..
Click to expand...
Click to collapse
I think the reason your post has not been answered is because we don't know exactly what you're asking. Also most answers are already posted. You just have to search and read them.
I'm not sure what you're doing myself, but I think you need to use Odin to flash CWM recovery and then use that recovery to flash ROMs, kernels, etc...
Since I really don't know what you're trying to do, you need to make sure what I said is REALLY what you need to do. By searching and reading you will find your answer.
Sent from my GT-P7510 using XDA Premium HD app
Benzoman said:
I think the reason your post has not been answered is because we don't know exactly what you're asking. Also most answers are already posted. You just have to search and read them.
I'm not sure what you're doing myself, but I think you need to use Odin to flash CWM recovery and then use that recovery to flash ROMs, kernels, etc...
Since I really don't know what you're trying to do, you need to make sure what I said is REALLY what you need to do. By searching and reading you will find your answer.
Sent from my GT-P7510 using XDA Premium HD app
Click to expand...
Click to collapse
tq very much.. right now, i'm trying to do just like u say, if it works, i'm in your debt..
what i meant was, that my android recovery system cannot detect the path to SD card, since the gt-p7500 did not have any SD Card slots, so i can't flash any .zip files from my tab.. Thanks so much..
dauzcroz93 said:
tq very much.. right now, i'm trying to do just like u say, if it works, i'm in your debt..
what i meant was, that my android recovery system cannot detect the path to SD card, since the gt-p7500 did not have any SD Card slots, so i can't flash any .zip files from my tab.. Thanks so much..
Click to expand...
Click to collapse
One of the partitions on your tablet is mounted as /mnt/sdcard (or /sdcard). You normally push files there using USB from your computer, either using "adb push" or mounting the sdcard as a media device on the computer.
Stock recovery does not let you choose a file from the /sdcard directory. I think the errors you're seeing is that the stock recovery isn't finding the files it's looking for.
You'll need to install Clockwork Mod recovery if you want to flash custom ROMs.
Galaxy Tab doesn't have an SD Card slot, so anything with external storage/mounting USB/ etc won't work in recovery. Flashing a ROM is possible because the data partition is read and treated as SD Card. If you need to add something to your tab via USB while it's in recovery, you'll need to use the Android Debug Bridge and type adb push, then the file, then the destination.
Example:
Code:
adb push rom.zip /sdcard/
I used to have a copy of Hasoon's tool, but I reformatted my PC a while ago and no longer have it.
I have a replacement for my son's broken phone, but I can't get it rooted or even install recovery because I get the Main Version is older error. I used to just use the tool, but all links to it have been removed from everywhere I can find. Is there anything I can do to get that back?
ncwildcat said:
I used to have a copy of Hasoon's tool, but I reformatted my PC a while ago and no longer have it.
I have a replacement for my son's broken phone, but I can't get it rooted or even install recovery because I get the Main Version is older error. I used to just use the tool, but all links to it have been removed from everywhere I can find. Is there anything I can do to get that back?
Click to expand...
Click to collapse
It is so simple to root the Rezound, there is no real need for an all in one tool just remember that it will wipe the phone...
1) Download the latest SuperSU.zip from here: http://download.chainfire.eu/supersu and place it in the root of the SD Card
2) Unlock via HTCdev (instructions are all over the place, including at HTCdev.com) and verify booting and operation
3) Extract recovery.img from the latest TWRP package and place in adb directory
4) Boot into Hboot and then start Fastboot
5) Execute "fastboot boot recovery.img"
6) Install/Flash SuperSU.zip from Step #1
7) Reboot
Done... That's it, your rooted and no MainVer issues!
Although, I would keep it stock until it OTA's to the latest version... unless it is already 4.5.605.14, then you have to do it the way I mentioned, the all in one tool won't work due to Hboot being to new.
To add; you may want to install busybox as some root apps need it. Its simple as getting Stericson's BusyBox app and pressing install then rebooting.
Sent from my Rezound using Tapatalk 4
3) Extract recovery.img from the latest TWRP package and place in adb directory
Does this mean create an adb folder on root of SD? What else should be in it? Sorry, not a noob just been a while since I rooted and I have to root\s-off a replacement. Thanks!
tholmes8291 said:
3) Extract recovery.img from the latest TWRP package and place in adb directory
Does this mean create an adb folder on root of SD? What else should be in it? Sorry, not a noob just been a while since I rooted and I have to root\s-off a replacement. Thanks!
Click to expand...
Click to collapse
No... On your computer you should have installed ADB (Android Debug Bridge), this is what gives you the adb.exe and fastboot.exe files to talk to the phone and perform operations from your PC... The directory that contains these files (usually .\adb\platform-tools\) is where you copy this file... These commands are done on your PC and the recovery.img is pushed to the phone.
There are tons of guides on this that are literally step by step, even Youtube videos, no offense, bur if you don't comprehend some of these steps you might want to do some more research before continuing.
Sent from my Nexus 4 using Tapatalk
acejavelin said:
No... On your computer you should have installed ADB (Android Debug Bridge), this is what gives you the adb.exe and fastboot.exe files to talk to the phone and perform operations from your PC... The directory that contains these files (usually .\adb\platform-tools\) is where you copy this file... These commands are done on your PC and the recovery.img is pushed to the phone.
There are tons of guides on this that are literally step by step, even Youtube videos, no offense, bur if you don't comprehend some of these steps you might want to do some more research before continuing.
Sent from my Nexus 4 using Tapatalk
Click to expand...
Click to collapse
No offense taken. Been brushing up and weeding out stuff that is out of date. I did install updated ADB/SDK and go over the guides. All coming back to me now. Think I've got all I need now. Thanks for the reply.
tholmes8291 said:
No offense taken. Been brushing up and weeding out stuff that is out of date. I did install updated ADB/SDK and go over the guides. All coming back to me now. Think I've got all I need now. Thanks for the reply.
Click to expand...
Click to collapse
OK, cool. If you need more assistance, fell free to ask.
Just for future reference... avoid the "one click" tools, especially on the Rez, they are mostly out of date. Plus knowing how to do it manually is usually quite useful.
acejavelin said:
OK, cool. If you ne. more assistance, fell free to ask.
Just for future reference... avoid the "one click" tools, especially on the Rez, they are mostly out of date. Plus knowing how to do it manually is usually quite useful.
Click to expand...
Click to collapse
Yeah I don't use 1 click. Thanks for the offer