TWRP has been updated please see here
http://forum.xda-developers.com/showthread.php?t=2075562
Really cool!)
Happy New Year
wow, cool, i'm using TWRP on the nexus 7 and it is way better than CWM IMHO
you are already into the 2013? We Europeans not
Backups don´t works for me...
CM10 FXP152
Hardtron said:
Backups don´t works for me...
CM10 FXP152
Click to expand...
Click to collapse
more info needed
fma965 said:
more info needed
Click to expand...
Click to collapse
Just does not work. I get fault message when starting the backup.
What information do you need?
CM10_FXP152/ .58 enhanced
SD 32Gb / FAT32-EXT4-SWAP
I did not notice you did this It took me about 6 hours to get TWRP working for our device.
Turbo r11 has TWRP, with backup/restore working, multiboot support and some other minor fixes. Also Turbo Kernel r11 final will support AOSP-ICS ROM's as well as JB
This is great.. Can't wait to try it on the Xperia PLAY.
Sent from my iPhone 4S using Tapatalk
Works great thank you!
Sent from my Xperia Play using xda premium
TWRP has been updated please see here
http://forum.xda-developers.com/showthread.php?t=2075562
championswimmer said:
TWRP has been updated please see here
http://forum.xda-developers.com/showthread.php?t=2075562
Click to expand...
Click to collapse
make this for stock based ics roms
xdarkmario said:
make this for stock based ics roms
Click to expand...
Click to collapse
what is up with xda and the lack of manners recently?
Sent from my R800i using Tapatalk 2
xdarkmario said:
make this for stock based ics roms
Click to expand...
Click to collapse
How bout u do it and stop demanding?
Sent from my R800i using xda premium
hey stop giving him a hard time... i guess it's ok.. just some over-enthusiasm about TWRP
@xdarkmario
I would love to do that but
1. i do not have the device, so I cannot test and debug it (the CM10/AOKP kernel was something I know my way around even without a device)
2. I am short on time these days, and I have a slow internet connection. i cannot team up with a tester who has a play and debug it and release.
i guess you'll have to wait for someone to do it for you. (i have posted instructions on doing it on that thread)
I do not know what I'm doing wrong. I'm trying a second time, but I can not do backups with TWRP. This time I'm using updated.
On the Backup option, I mark the options: System, Data, sd-ext, Cache. Also marked "Enable Compression".
When you start the backup immediately get the message "Failed" .... E: Unable to locate boot partition.
Help please!!!
Edit: move to correct tread.
Hardtron said:
I do not know what I'm doing wrong. I'm trying a second time, but I can not do backups with TWRP. This time I'm using updated.
On the Backup option, I mark the options: System, Data, sd-ext, Cache. Also marked "Enable Compression".
When you start the backup immediately get the message "Failed" .... E: Unable to locate boot partition.
Help please!!!
Click to expand...
Click to collapse
1. REPLY ON THAT THREAD. I WANT TO MAINTAIN ONLY ONE FOR TWRP NOT 18 FOR EACH DEVICE
2. did you remove the "tick" from boot and try doing ?
delete
Related
This discussion thread for Andy's Rom which last updated on 20 October 2011
Q. When will the next update comes??
A. No ETAs confirm, but this is his proof something for u.
Q. Will there will be ICS Phoenix??
A. Read this.
andy572 said:
Currently i'm developing on ICS.
next release i dont know if its a gingerbread or ics - depends on working progress.
even i dont know if i'm stoping to develop on P500, i own these device all the time
and never sale it but its time for new things to learn for me.
Click to expand...
Click to collapse
Ask any question u want but please dont spam this thread with nonsense...
ASK ANY RELATED QUESTIONS ONLY!
FREQUENTLY ASKED QUESTIONS!!! (Press thanks if this helps!)
Q. Which Recovery can i flash with?
A. TWRP (Team Win Recovery), Clockworkmod and AmonRA
Q. Can i use this ROM with the latest baseband?
A. No!!! If you want full data use ONLY old baseband... To flash it, go here: http://forum.xda-developers.com/showthread.php?t=1149530 or here: (FOR PICTURE GUIDE) http://forum.xda-developers.com/showthread.php?t=1217504
Q. Why i having battery drains?
A. If you want save your battery, dunt use the phone... JOKE! Lower down your brightness and use the data/3G/WIFI whenever when you wanna use... And being a portable charger which you can use... Eg. MILI Portable Charger...
Q. Where can i get back CM stuffs?
A. Andy has actually modified the code in the second released, so his has modified it and T-Mobile theme chooser wont work anymore.
Q. Can i boost my RAM or Memory? How?
A. Follow this thread... CLICK HERE!!!
For fast Multitasking, use RAM Manager by Juwe11
Q. ****! I somehow stuck on 2nd LG Logo!! How?
A. Try reflashing first, if the problem persist again, comment here and try to produce logcat and devs can help.
Q. Wifi doesn't work! How?
A. Use the Latest Franco.kernel .35 included (Latest is v1.2-12112011)
Q. I'm using old baseband, but mobile data doesn't work!
A. Go to Settings>Wireless&Networks>Mobile networks>Access Point Names. If empty, your APN isn't included in the apns-conf.xml file (it's a known issue). Input the APN manually. OR Since u have CM7, flash it over... It will work...
Q. What is the solution to Tethering??
A. Use Wifi Tether (available in Market)
Q. Can i flash this over mik's CM7 or Neojn's (Knzo) Void.Forever?
A. Yes (Tested by me)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
LAST QUESTION ABOVE THIS... READ THIS!!!
andy572 said:
You have to wipe ALL:
- if your new rom version is different from previous, even gingerbread gingerbread, as example you change from 2.3.3 to 2.3.4 or to 2.3.5
- if youre coming from froyo and go to gingerbread or vice versa
You have to wipe cache/dalvik only
- if you change between same versions of gingerbread, as example you're coming from 2.3.4 and switch to another 2.3.4
You have to wipe even ALL
- if you're coming from mik's 2.3.x or any another rom and would like to change to Andy's Phoenix 2.3.4 because it's different API code
Click to expand...
Click to collapse
Any More Questions? Comment Here! We will help you asap! 80% Gurantee!!! Further question or bugs, Go Here
Download Link: Here!
Official Phoenix Website, www.phoenix-android.com
where's it?
royal.tarun said:
where's it?
Click to expand...
Click to collapse
Out sooner or later...
Sent from my LG-P500 using Tapatalk
i thought it was released already. It was meant to be tomorrow.
Pixelization problem in andy's rom
I can't post in the dev section but reading the comments and seeing the screenshots, I just wonder if the pixelization is related to a compression algorithm
that is implemented in the rom.
Just wanted to see how my signature looks. Ignore this post.
dhruv.always said:
Just wanted to see how my signature looks. Ignore this post.
Click to expand...
Click to collapse
this is not the thread to do such a thing. if you want to preview your signature do it in the user cp
Sent from my LG-P500 using xda premium
bababasa said:
I can't post in the dev section but reading the comments and seeing the screenshots, I just wonder if the pixelization is related to a compression algorithm
that is implemented in the rom.
Click to expand...
Click to collapse
I posted in that thread for you. I hope you don't mind
Sent from my LG-P500 using xda premium
my weekend nearly end, really hope to taste the rom^o^
Sent from my LG-P500 using XDA App
I'm bumping this thread in hopes that the spamming of the dev thread will stop... let's see.
How do I switch from AmonRA recovery to CWM?
Feeshie said:
How do I switch from AmonRA recovery to CWM?
Click to expand...
Click to collapse
Your question has nothing to do with this rom... flash CWM via zip...read the stickies in the dev section to find it.
Turducken said:
Your question has nothing to do with this rom... flash CWM via zip...read the stickies in the dev section to find it.
Click to expand...
Click to collapse
It does. Andy says in his description that this rom only supports CWM and AmonRA isn't supported anymore. But Thanks.
Feeshie said:
It does. Andy says in his description that this rom only supports CWM and AmonRA isn't supported anymore. But Thanks.
Click to expand...
Click to collapse
Despite what Andy says that's not actually true. Simply disable "signiture verify" in AmonRa and it'll work just fine. AmonRa supports both Amend and Edify scripting, I honestly don't know why he posted that.
Feeshie said:
It does. Andy says in his description that this rom only supports CWM and AmonRA isn't supported anymore. But Thanks.
Click to expand...
Click to collapse
What? The bomb can be flash using AmonRA but disable the stupid verfication and u r set to go for the bomb,
Sent from my LG-P500 using Tapatalk
Haven't got time to tinker with phone here, Andy released on 2AM and then I have to go to work lol. Has anyone confirmed the USB detecting without LG driver feature? That's my most anticipated feature.
Also, nice to know I don't need the extra step to change recovery first. I know AmonRa is old, but it hasn't given me problems so changing isn't high on my list
Interesting that people in the dev thread says it works with both old and new basebands.
So I flashed the new rom, it looks amazing but the only problem I came across was no mobile data, I even flashed the gapps but still no mobile data. Anyone have the same problem.
Sent from my LG-P500 using XDA App
You need to add your apn manually and after flash Franco later kernel, wifi working very well.
Thanks again for Andy and franco
Sent from my LG-P500 using XDA App
Where do I find a copy of the apn list? Can I use mik's cm7 apn list, copy it to the system/app path than reboot, also forgot to mention about changing permissions
Sent from my LG-P500 using XDA App
Jrhodes85 said:
Where do I find a copy of the apn list? Can I use mik's cm7 apn list, copy it to the system/app path than reboot, also forgot to mention about changing permissions
Sent from my LG-P500 using XDA App
Click to expand...
Click to collapse
Use Apn backup and restore app from market ;-)
Sent from my HTC Desire using XDA Premium App
Requires:
Stock ICS ROM
Root
Download:
1.0
Install:
Download the zip package
Extract the folder
Connect your phone to the pc with USB debugging
Click on install.bat
How to use:
Power off the phone
Power on the phone
When you see the SONY logo pressing the Volume down button while you see the recovery
Credits:
Jerpelea
Munjeni
i'll test this later, tnx atis
Goodbye TEAM
Atis112 Sorry, but that was not the CWM to my office, I thought it was the team, and that everyone would have their work for the xperia, there is no one who does it first, if not move together, so the team ....
Works fine.
atis112,,, locked bootloader champ
Sent from my Xperia U using Tapatalk 2
xperiafan13 said:
Atis112 Sorry, but that was not the CWM to my office, I thought it was the team, and that everyone would have their work for the xperia, there is no one who does it first, if not move together, so the team ....
Click to expand...
Click to collapse
I really don't understand all of this.
I make my own recoverys, i don't like work in team. If you want to make an other, just do It. I said, that if you wanna use anything of my works, permission granted.
I don't know what did you want with this.
Sent from my Xperia U using xda premium
I already have you previous recovery... And currently m on cm9..so will it work?
Sent from my Xperia U using xda app-developers app
niku4uster said:
I already have you previous recovery... And currently m on cm9..so will it work?
Sent from my Xperia U using xda app-developers app
Click to expand...
Click to collapse
No. Its for stock ics. I will add this to my next rom.
Sent from my Xperia U using xda premium
I am on stock ICS and i already have CWM Touch 5.Can i just install this on top of existing one
robimarko said:
I am on stock ICS and i already have CWM Touch 5.Can i just install this on top of existing one
Click to expand...
Click to collapse
yes, at least mine works
it will overwrite ur previous CWM...
just don't forget to grant permission when superuser app ask from ur phone if u haven't grant any adb shell for mount-remount system
Can't mount USB Mass Storage using this recovery.
Is it normal or is it a bug? Using King's Rom at the moment.
Edit: Seems like it's this recovery bug, as I switched to an older recovery (5.5.0.4) and USB Mass Storage is working fine now.
I can get a good deal on a simlocked Xperia U, but want to use another provider.
Does this recovery remove the simlock?
THX.
Work on the .54 FW?
Made my day!
Just discovered that my Provider wants 75% of my XU's price to remove Simlock (may those [email protected])"%$/% burn in hell) ...
This one is the big deal for locked BLs, works great! :cyclops:
THX a lot!
Can i use this also for unlocked Bootloader?
Why there is an error: unknown volume for path sd-ext (Dalvik cache).
OllerLoewe said:
Can i use this also for unlocked Bootloader?
Click to expand...
Click to collapse
Yes, if you use stock kernel.
mrozilla said:
Why there is an error: unknown volume for path sd-ext (Dalvik cache).
Click to expand...
Click to collapse
Because you don't have sd-ext partition.
Hmm, and I have to have it? I Stock FW .54, ROOT and your CWM.
mrozilla said:
Hmm, and I have to have it? I Stock FW .54, ROOT and your CWM.
Click to expand...
Click to collapse
No. sd-ext is a partition for apps in your sdcard. If you make an ext partition in your sdcard (or internal memory in this phone) you can run apps from this. But we have enough space for apps, so we don't need to use it.
Ok, thanks for the clarification.
On other devices, I have not seen this error so I wanted to ask the author what exactly means, but if this is normal, and so it should be fine.
Hi all
I would hear about what Gapps can be used, with pershoot last ROM:
http://droidbasement.com/db-blog/
Thx to all
alexdk said:
Hi all
I would hear about what Gapps can be used, with pershoot last ROM:
http://droidbasement.com/db-blog/
Thx to all
Click to expand...
Click to collapse
Use this one and you will be fine - http://www.mediafire.com/download.php?o6e8kowyuc59zjc
Leogp said:
Use this one and you will be fine - http://www.mediafire.com/download.php?o6e8kowyuc59zjc
Click to expand...
Click to collapse
Thx mate, i wil try it, after this:
This it for JB 4.2
http://d-h.st/MJX
Is pershoot 4.1 or..... I cannot see it nowhere
Pershoots newest Build is 4.2.1, so it works with 4.2 Gapps. But mate, wrong section here. This must be in Q&A Forum.
I always use JusTun inverted gapps. http://forum.xda-developers.com/showthread.php?t=1797292
You can use with pershoots latest build, because I have already tryed and works. But read carefully the FAQ, otherwise you can have troubles.
Good luck.
Verstuurd van mijn GT-P7510 met Tapatalk
I have installed Pershoot latest Rom with 4.2 gapps.
After installed it, my sdcard files is inside 5 different maps0/0/0/0/ ( it like: internal sdcard/internal sdcard/internal sdcard/internal sdcard/internal sdcard), and there can I see my phone content..........any idea?
Thx
STATUS
----------
Solved
alexdk said:
I have installed Pershoot latest Rom with 4.2 gapps.
After installed it, my sdcard files is inside 5 different maps0/0/0/0/ ( it like: internal sdcard/internal sdcard/internal sdcard/internal sdcard/internal sdcard), and there can I see my phone content..........any idea?
Thx
STATUS
----------
Solved
Click to expand...
Click to collapse
What was the answer to this mate?
alexdk said:
Hi all
I would hear about what Gapps can be used, with pershoot last ROM:
http://droidbasement.com/db-blog/
Thx to all
Click to expand...
Click to collapse
go to goo.im/gapps
They stock all of Gapps starting from the newest Cyanogen Mod 10.1, Cyanogen Mod 10, Cyanogem Mod 9 etcc
Sent from my GT-P7500 using xda premium
Installation Instructions
Hey guys,
I downloaded all the files from Droidbasement. So my question is, is it necessary to flash the Bootloader through Odin or should I just flash the Recovery and Modem?
Does anyone know why my googlenow would be crashing? Per shoots latest with 12122012 gapps 4.2.1.. Thanks
Sent from my Galaxy Nexus using xda app-developers app
also this is in the completely wrong forum...
How do I get the US ICS Boot loader flashed on my device? Mobile Odin says there's no valid partitions in the tar.md5 file that was downloaded.
Can't find anything in the Q&A section
Sent from my GT-I9300 using xda premium
mrbubba999 said:
How do I get the US ICS Boot loader flashed on my device? Mobile Odin says there's no valid partitions in the tar.md5 file that was downloaded.
Can't find anything in the Q&A section
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
If you can't find an answer in Q&A that's why you start a new thread in Q&A to ask the question. Threads and responses in the Dev area should be to help a dev or release work you have done yourself. But to do you a solid the easiest solution to your problem is to use desktop Odin and flash the bootloader file under the BOOTLOADER option.
Guys, this is a thread about a rom that already has a thread in this same forum. Searching there will more than likely give you the info you need. Happy searching!
Well checked out the ROM. Here are the bugs I found out so far:
1.The number of home screens is almost always double the number selected.
2.Wallpaper issue from 4.1.2 still isn't fixed.
3.Feeles a lot slower than the 4.1.2.
4.Panorama force closes.
5.No photosphere.
This is the only bugs I have noticed as of now. But still I'm glad that our beloved tab got this update in the first place!
Thanks a lot pershoot! Great job! Looking forward to more fixes in future releases
Sent from my GT-P7500 using xda app-developers app
djmatt604 said:
If you can't find an answer in Q&A that's why you start a new thread in Q&A to ask the question. Threads and responses in the Dev area should be to help a dev or release work you have done yourself. But to do you a solid the easiest solution to your problem is to use desktop Odin and flash the bootloader file under the BOOTLOADER option.
Guys, this is a thread about a rom that already has a thread in this same forum. Searching there will more than likely give you the info you need. Happy searching!
Click to expand...
Click to collapse
I didn't create a new one as this one was already running (although in the wrong forum at the time) Thanks for the tip about desktop Odin, I was hoping to use mobile Odin as my laptop isn't setup with any tools at the moment. I didn't need to flash anything anyway, I remembered that I bought my Tab in the USA so it already had it.
So far running good with the Rom, I'm really liking the new UI as it means I make less mistakes when typing as the notifications are now at the top of the screen. The keyboard issue is annoying but I had the same problem in CM10
Sent from my GT-P7510 using xda premium
heslo.rb26 said:
What was the answer to this mate?
Click to expand...
Click to collapse
I´ve formatted everything and start from the beginning. After this I noticed that, I´m still have to go through a folder called 0/ before I can see all my content in the phone.
The problem is still there but i only have 1 folder and not 5 like before.
alexdk said:
I´ve formatted everything and start from the beginning. After this I noticed that, I´m still have to go through a folder called 0/ before I can see all my content in the phone.
The problem is still there but i only have 1 folder and not 5 like before.
Click to expand...
Click to collapse
That is normal for 10.1 due to multi user capability. Pershoot's thread has called that out already guys. You may get better support in there....
Sent from my GT-P7510 using XDA Premium HD app
djmatt604 said:
That is normal for 10.1 due to multi user capability. Pershoot's thread has called that out already guys. You may get better support in there....
Sent from my GT-P7510 using XDA Premium HD app
Click to expand...
Click to collapse
Sorry dude, which thread.....i have looked around but have found nothing.
The Cyanogenmod 10 Preview thread is where most are talking about pershoots 10.1 update.
Merry Christmas!! Have a safe holiday
Sent from my SGH-T989 using XDA Premium HD app
We are the developers of AvatarROM .
We have upgraded the ROM to JB (4.2.2). Would anyone be interested to do a beta test.
Instructions:
If it's the first time flashing avatarrom or coming from another ROM
Before Flash Avatar ROM you need to install https://www.box.com/s/963cd9d1cf216e4e16e0 via CWM reboot recovery, and then install the ROM
Download link
Amazon S3
Gapps (4.2.2)
Feature request page - https://avatarrom.uservoice.com/forums/193652-avatarrom-feature-request
Reserved
The link is not working ! Can you tell us is everything is working in this ROM ??? And do we need ext4 partition ?
That is a link.
http://s3.avatarrom.com/Unofficial/2.12b/avatar-2.12b-0-20130531_UNOFFICIAL-passion.zip
I'm trying now, thank you Avatar Developers!
no a2sd.... no phone signal....WPA doesnt work....network autodetection doesnt work...with gapps it requires 330/6/100 and u hav to use m2sd...but i dont recommend using this rom now
@bippi79 we really need something like a2sd...
@arnab
You can use mini gapps like that
http://goo.im/devs/BaNkS/GApps/GApps 4.2.2 Minimal.zip
http://forum.xda-developers.com/showthread.php?t=2012857
It is only 8mb. I tried 250\10 without problem.
What is the sebaastin.zip?
I have been trying out Avatar on SGS2 and I am impressed especially by the themeing features and look to use the weebo also.
craagz said:
What is the sebaastin.zip?
Click to expand...
Click to collapse
its a custom hboot.zip which changes ur hboot partition. before doing that u need to install BLACKROSE. it would be better if the OP(BIPPI79) adds this hboot requirement details in the first post
Sent from my Nexus One using Tapatalk
fancyfree said:
The link is not working ! Can you tell us is everything is working in this ROM ??? And do we need ext4 partition ?
Click to expand...
Click to collapse
You can check now
So, after installing this and realizing my hboot was incorrect, I attempted to reflash to the slimrom I had before. Now, I'm stuck in a boot loop. I believe it has to do with the sebaastin.zip. How do I undo what that zip changed?
superGOAT said:
So, after installing this and realizing my hboot was incorrect, I attempted to reflash to the slimrom I had before. Now, I'm stuck in a boot loop. I believe it has to do with the sebaastin.zip. How do I undo what that zip changed?
Click to expand...
Click to collapse
flash the correct hboot for slim rom. wipe all first
Sent from my Nexus One using Tapatalk
Thanks for bringing new roms to the N1 :good:
Gonna test it, hopefully i will be able to install App2SD. Will report tomorrow or the day after to put my troughs :laugh:
Beware...it doesn't have that script...n ya BTW USB debugging is also broken....blackrose doesn't detect ADb means repartition doesn't work.
Sent from my Nexus One using xda app-developers app
[ROM][JB] Beta Testing for AvatarROM
almost all things doesnt work, is really really beta for the moment, thanks Avatar team!
n1newbie said:
its a custom hboot.zip which changes ur hboot partition. before doing that u need to install BLACKROSE. it would be better if the OP(BIPPI79) adds this hboot requirement details in the first post
Sent from my Nexus One using Tapatalk
Click to expand...
Click to collapse
What does it change it to? I know I can just try it, but with the things that don't work I'd rather just know what something will be changed to before I change it. I'm on Oxygen GB right now, but thinking of trying a 4.2 ROM.
bobbyphoenix said:
What does it change it to? I know I can just try it, but with the things that don't work I'd rather just know what something will be changed to before I change it. I'm on Oxygen GB right now, but thinking of trying a 4.2 ROM.
Click to expand...
Click to collapse
Its the zip from the hboot collection post for the old sebaastin ROM. I believe its 250/10.
Sent from my Nexus One using xda premium
question
what does it work? and what doesnt it work? add on post number one @bippi79 thanks!
I couldnt pass home screen, touch didnt work for me, i count press the "accept" button of the home screen tutorial.
xavys said:
I couldnt pass home screen, touch didnt work for me, i count press the "accept" button of the home screen tutorial.
Click to expand...
Click to collapse
check your hboot, thanks:good:
whenever i install a 4.2 rom the same problems occur, camera says no external storage available and so does gallery and playstore just force closes
I had this problem n solved it.
This is strange but trust me!
I guess your using a blade42 kernel for aokp etc?! Flash a cm10 kernel, wipe cache and dalvik. Wait for optimizing apps to finish n it will get stuck on starting android or something like that. After a min or two reboot into bootloader n flash the latest blade42, wipe cache and dalvik then reboot.
Done
I had this n no matter how many different blade42 kernels I tried they were all the same. I had a feeling there was a problem changing kernels, just a hunch, I assumed that forcing the phone to change wrongly to a cm10 kernel made the phone make a better job of changing back to the correct kernel.
If you get what I mean!
Anyway try the cm10 idea
Sent from my HTC One X+ using xda premium
indie12 said:
whenever i install a 4.2 rom the same problems occur, camera says no external storage available and so does gallery and playstore just force closes
Click to expand...
Click to collapse
It is because you did not create the 0 folder...
Reading the thread from which you installed the 4.2 ROM really helps!
Trust me on this!!!!
This 'problem' has been reported at least 1000 times and the solution is within the first 3 or 4 posts on each and every 4.2 thread!
bassyboy said:
I had this problem n solved it.
This is strange but trust me!
I guess your using a blade42 kernel for aokp etc?! Flash a cm10 kernel, wipe cache and dalvik. Wait for optimizing apps to finish n it will get stuck on starting android or something like that. After a min or two reboot into bootloader n flash the latest blade42, wipe cache and dalvik then reboot.
Done
I had this n no matter how many different blade42 kernels I tried they were all the same. I had a feeling there was a problem changing kernels, just a hunch, I assumed that forcing the phone to change wrongly to a cm10 kernel made the phone make a better job of changing back to the correct kernel.
If you get what I mean!
Anyway try the cm10 idea
Sent from my HTC One X+ using xda premium
Click to expand...
Click to collapse
nothing to do with kernels, all to do with the rom's and reading the F&Q of CM10.1\AOKP
Addicted2xda said:
It is because you did not create the 0 folder...
Reading the thread from which you installed the 4.2 ROM really helps!
Trust me on this!!!!
This 'problem' has been reported at least 1000 times and the solution is within the first 3 or 4 posts on each and every 4.2 thread!
Click to expand...
Click to collapse
I already had the 0 folder. I had been successfully using 4.2 ROMs for a little while. It wasn't until I updated my kernel that the problem started. Then eventually even the origional kernel (that worked) started to say no storage. The only way it got solved was the way I mentioned.
Sent from my HTC One X+ using xda premium
---------- Post added at 06:34 PM ---------- Previous post was at 06:31 PM ----------
Lloir said:
nothing to do with kernels, all to do with the rom's and reading the F&Q of CM10.1\AOKP
Click to expand...
Click to collapse
Im not sure what the cause is/was. As I say above, the 0 folder is there and I could only sort it that one way.
Sorry if this is a stupid question but what is the f&q
Sent from my HTC One X+ using xda premium
Its ok i know what it means. Well ive read the info on rom pages but i didn't read anything that I didn't try or help.
Sent from my HTC One X+ using xda premium
bassyboy said:
Its ok i know what it means. Well ive read the info on rom pages but i didn't read anything that I didn't try or help.
Sent from my HTC One X+ using xda premium
Click to expand...
Click to collapse
Ditto.
I carefully followed the instructions for the AOKP 4.2.2 - 2.0k installation. It all runs fine, I have the data/media/0 folder (i checked in TWRP), but my apps keep telling me there is no external storage.
Perhaps someone could point me at ANOTHER FAQ that I might have missed.
Ta,
Fitz.
fitzeh said:
Ditto.
I carefully followed the instructions for the AOKP 4.2.2 - 2.0k installation. It all runs fine, I have the data/media/0 folder (i checked in TWRP), but my apps keep telling me there is no external storage.
Perhaps someone could point me at ANOTHER FAQ that I might have missed.
Ta,
Fitz.
Click to expand...
Click to collapse
Just need to know one thing, after you created the 0 folder - did you copy the items in SDCARD/ to the 0 folder?
Also, if possible - always use the boot.img which is inside the ROM...
fitzeh said:
Ditto.
I carefully followed the instructions for the AOKP 4.2.2 - 2.0k installation. It all runs fine, I have the data/media/0 folder (i checked in TWRP), but my apps keep telling me there is no external storage.
Perhaps someone could point me at ANOTHER FAQ that I might have missed.
Ta,
Fitz.
Click to expand...
Click to collapse
yes
http://forum.xda-developers.com/showthread.php?t=2338443
Lloir said:
yes
http://forum.xda-developers.com/showthread.php?t=2338443
Click to expand...
Click to collapse
Thanks mate, just to be clear, stock ROM would include revolution HD?
Just need to know one thing, after you created the 0 folder - did you copy the items in SDCARD/ to the 0 folder?
Also, if possible - always use the boot.img which is inside the ROM...
Click to expand...
Click to collapse
Second bit first, yes I did use he boot.img from the ROM....
As to copying stuff, no I didn't because there wasn't anything in it I wanted, this is my "mess about and break" phone.
My issue wasnt as much "where's all my stuffs gone???????!!!!!!!!!1111111oneone" as "my camera app keeps ending because it can't see anywhere to store pictures"
Thanks for the input folks. Shall install revolution HD, make some files, make a 0 dir, copy those files into it, flash AOKP and report back...!
fitzeh said:
Thanks mate, just to be clear, stock ROM would include revolution HD?
Click to expand...
Click to collapse
Did not quite get you - if you mean stock look and feel? Yeah pretty much stock
Second bit first, yes I did use he boot.img from the ROM....
As to copying stuff, no I didn't because there wasn't anything in it I wanted, this is my "mess about and break" phone.
My issue wasnt as much "where's all my stuffs gone???????!!!!!!!!!1111111oneone" as "my camera app keeps ending because it can't see anywhere to store pictures"
Thanks for the input folks. Shall install revolution HD, make some files, make a 0 dir, copy those files into it, flash AOKP and report back...!
Click to expand...
Click to collapse
Pretty weird, I have tried both Carbon & CM 10.1 by loir - these issues were not there....
Could you try reflashing the ROM & Kernel again, if you have spare time
fitzeh said:
Thanks mate, just to be clear, stock ROM would include revolution HD?
Second bit first, yes I did use he boot.img from the ROM....
As to copying stuff, no I didn't because there wasn't anything in it I wanted, this is my "mess about and break" phone.
My issue wasnt as much "where's all my stuffs gone???????!!!!!!!!!1111111oneone" as "my camera app keeps ending because it can't see anywhere to store pictures"
Thanks for the input folks. Shall install revolution HD, make some files, make a 0 dir, copy those files into it, flash AOKP and report back...!
Click to expand...
Click to collapse
Yes
Sent from my One X+ using Tapatalk 4 Beta
Lloir said:
Yes
Sent from my One X+ using Tapatalk 4 Beta
Click to expand...
Click to collapse
All sorted now, thanks mate.