[Q] Prestigio 5770D rooting - Android Q&A, Help & Troubleshooting

Hello all,
I've been looking around the forum (and elsewhere online) for anyone who was able somehow to root the
Prestigio PMP5770D Duo tablet. It has stock ICS 4.0.4.
I'm a complete newbie in regards to tablets but I've been playing around with the X10 for a long time.
I'm thinking of using Flashtool to try and root it somehow, instead of the ADB shell which zimmbadroid tried already.
The only issue i am facing now is:
Since it is not rooted, i cannot use Titanium backup (or any other tool) to fully backup it, in case anything will go wrong
while trying to root it.
Does anyone else here (which is much experienced with rooting tablets) have any other ideas?
I'm always open to new suggestions.
Primary concern is HOW to fully backup it, in order to restore it to its current state (if anything goes wrong).
Thanks in advance.

I have same tablet, and same problem

npantos said:
I have same tablet, and same problem
Click to expand...
Click to collapse
+1
Sent from my PMP5770D using xda app-developers app

I have rooted Prestigio PMP 5570C today
dta1eros said:
Hello all,
I've been looking around the forum (and elsewhere online) for anyone who was able somehow to root the
Prestigio PMP5770D Duo tablet. It has stock ICS 4.0.4.
I'm a complete newbie in regards to tablets but I've been playing around with the X10 for a long time.
I'm thinking of using Flashtool to try and root it somehow, instead of the ADB shell which zimmbadroid tried already.
The only issue i am facing now is:
Since it is not rooted, i cannot use Titanium backup (or any other tool) to fully backup it, in case anything will go wrong
while trying to root it.
Does anyone else here (which is much experienced with rooting tablets) have any other ideas?
I'm always open to new suggestions.
Primary concern is HOW to fully backup it, in order to restore it to its current state (if anything goes wrong).
Thanks in advance.
Click to expand...
Click to collapse
I have rooted Prestigio PMP 5570C today
It was difficult, because system filesystem hasn't free space to copy su and superuser binaries to it.
I decomposed update.img to system.img boot.img kernel.img etc.
Next I mounted system.img as ext4 partition and delete some unnecessary apk with reclaiming free space (rm -rf filename).
Next I copied su binaries and set permisions and owner to it.
Finally I have unmount system.img and flash it back to tablet by RK30update without creating update.img back.
5570C has fortunately firmware to flash it by Rockchip Batch tool - thus it is easy modify it and this kind of firmware is necessary to unbrick tablet in any case.
5770D hasn't those kind of firmware - it has only SD card based update image.
I would try upload firmware from 5770D to 5570C (it is safe, because I have Rockchip batch tool friendly image to flash original FW back)
by converting it to system.img kernel.img and system.img files and upload them by RK30update tool.

maras77 said:
I have rooted Prestigio PMP 5570C today
It was difficult, because system filesystem hasn't free space to copy su and superuser binaries to it.
I decomposed update.img to system.img boot.img kernel.img etc.
Next I mounted system.img as ext4 partition and delete some unnecessary apk with reclaiming free space (rm -rf filename).
Next I copied su binaries and set permisions and owner to it.
Finally I have unmount system.img and flash it back to tablet by RK30update without creating update.img back.
5570C has fortunately firmware to flash it by Rockchip Batch tool - thus it is easy modify it and this kind of firmware is necessary to unbrick tablet in any case.
5770D hasn't those kind of firmware - it has only SD card based update image.
I would try upload firmware from 5770D to 5570C (it is safe, because I have Rockchip batch tool friendly image to flash original FW back)
by converting it to system.img kernel.img and system.img files and upload them by RK30update tool.
Click to expand...
Click to collapse
Nice work
I hope pmp5770d gets root soon, because its really nice gadget.
Sent from my GT-I9001 using xda app-developers app

zimmbadroid said:
Nice work
I hope pmp5770d gets root soon, because its really nice gadget.
Sent from my GT-I9001 using xda app-developers app
Click to expand...
Click to collapse
Nice work maras77.
Hope it works for the 5770D. I'll be waiting to hear for any news. Take your time with it.
Every other tool i've tried failed so far...
Cheers

Hello!
Did you try Root MANY ANDROID!? It worked for me.
Best regards,
tungdil

tungdil said:
Hello!
Did you try Root MANY ANDROID!? It worked for me.
Best regards,
tungdil
Click to expand...
Click to collapse
PMP5770D? Which rom version? I tried that method 2 times with no sucess.
Sent from my GT-I9001 using xda app-developers app

zimmbadroid said:
PMP5770D? Which rom version? I tried that method 2 times with no success.
Click to expand...
Click to collapse
Hello zimmbadroid!
In the settings I find the following (cut some lengthy entries to what i believe is essential):
Model: PMP5770D
Android-Version: 4.0.4
Kernel-Version: 3.0.8-ge04d3bb
Build number: PMP-5770D_20121109_V2.0.14
I flashed the device with a zip-File I downloaded from Prestigio's home-page. This version disappeared when the updated their site in December but I believe it is the same one as this one here (sorry I cannot yet post links) yf.value4it.com/Service_Files/TabletPC/PMP5770D/PMP5770D_20121109_V2.0.14.zip.
[Wrong]
As far as I remember I installed a terminal emulator APP before using root-Many and executed some commands in the terminal on the tablet when root-Many asked to do so in the terminal on the PC.
[/Wrong]
Edit: It seems I did not remember correctly . After looking at RunMe.sh, and at my tablet (found some left-over's from the rooting process) I believe I did in fact use the "Special Mode". I also installed the terminal emulator. But the special mode uses its own Term.apk.
Hope that helps somehow,
tungdil

tungdil said:
Hello zimmbadroid!
In the settings I find the following (cut some lengthy entries to what i believe is essential):
Model: PMP5770D
Android-Version: 4.0.4
Kernel-Version: 3.0.8-ge04d3bb
Build number: PMP-5770D_20121109_V2.0.14
I flashed the device with a zip-File I downloaded from Prestigio's home-page. This version disappeared when the updated their site in December but I believe it is the same one as this one here (sorry I cannot yet post links) yf.value4it.com/Service_Files/TabletPC/PMP5770D/PMP5770D_20121109_V2.0.14.zip.
As far as I remember I installed a terminal emulator APP before using root-Many and executed some commands in the terminal on the tablet when root-Many asked to do so in the terminal on the PC.
Hope that helps somehow,
tungdil
Click to expand...
Click to collapse
Thanks for your reply.
I also updated tablet with that update.zip but didnt try to root it since update. Im gonna try your method ASAP and report it here.
Cheers
Edit: Did you lose any of your data in root process?
Sent from my GT-I9001 using xda app-developers app

zimmbadroid said:
Thanks for your reply.
Edit: Did you lose any of your data in root process?
Click to expand...
Click to collapse
No, not that I am aware of. However, the number of apps installed while rooting was quite limited, and no private data such as e-mail addresses, etc. on the tab.
Hope it's gonna work for you as well...
tungdil

Hello guys,
Tried the root many android but it did not work for me.
I actually tried it in the past, but thought hey, whats one more time?
Does anybody have any news on this?
I'm seriously considering selling it and purchasing the 8' one which seems to be easily rootable.
The fact is that i am quite pleased with its performance.
BR,
Eros

dta1eros said:
Tried the root many android but it did not work for me.
Click to expand...
Click to collapse
Hello dta1eros,
did you try it using Windows or Linux? It seems I am the only one here who could successfully root the 5770D with rootMany (I used Linux); had ICS 4.0.4 installed. Very strange
Where in the process did you get stuck? What was the result?
Regards,
tungdil
P.S.: Maybe using the tool multiple times, as described in here (sorry still cannot post external links: rootzwiki.com/topic/34162-root-kindlefire-7hd-probably-the-other-2ndgen-kindlefire/#entry1054645) would help? The guy wrote:
... failed the first few times, but selecting normal mode and running the exploit 5-6 times finally got me root.
Click to expand...
Click to collapse
Note: I also checked the "qemu-method" described in the post, but right now think it won't work. However, after multiple reboots the behaviour of the tablet changed (didn't complete Android start-up until I removed /data/local.prop again). That's what makes me believe running the tool multiple times could help.

PMP5770D Duo rooted!
Hello all,
To any owners of PMP5770D DUO still looking to root their device, it has finally worked! Confirmed just now - 14/3/2013.
Its been a while now, so i thought to come back and see if there were any updates regarding this request i posted.
After going through this thread, i noticed also that the "Root MANY ANDROID! [Upd: 11.03.2013]" had been updated.
So, i downloaded the latest version "Root_with_Restore_by_Bin4ry_v21" from the respective thread.
Extracted contents to a folder easy to go to via command line, and run the batch file. (RunMe.bat)
My suggestion is it would be better to open a command prompt and execute the batch file (not double clicking it from explorer)
This way, if anything goes wrong or process gets stuck you may see whats happening.
Anyways, lets get on with it.
Before proceeding, make sure tablet has Debugging ON and ALL ADB drivers are installed on your computer.
I performed this on Win7 x64 just fine. The tablet info is exactly as i bought it:
Model number: PMP5770D
Android version: 4.0.4
Kernel version: 3.0.8-ge04d3bb [email protected] #98
Build number: PMP5770D_20121109_V2.0.14.IMM761.user.root.20121109 (this is dumb's prestigio latest release)
I will post the entire procedure here so this will be quite long. At certain points, you will see that there are sections starting and ending
with these {{ and }} . This is me explaining what actually is happening to the tablet so in case it happens to you as well, then don't worry.
At some points you may see errors like "FAILED_ALREADY_EXISTS". This is because i actually had run this process more than once
while trying different options etc until i got it working. So, if anything needs mentioning, it will be in {{ }}.
Also, in Bold text are the options i selected through out this batch file.
>RunMe.bat
======================================================================
= This script will root your Android phone with adb restore function =
= Script by Bin4ry (thanks to Goroh_kun and tkymgr for the idea) =
= Idea for Tablet S from Fi01_IS01 =
= (11.03.2013) v21 =
======================================================================
Device type:
1) Normal
2) Special (for example: Sony Tablet S, Medion Lifetab)
3) New Xperia Root by Goroh_kun
x) Unroot
Make a choice: 2
Special mode:
1) Root
2) Rollback
Make a choice: 1
Tablet S mode enabled!
1318 KB/s (314540 bytes in 0.233s)
pkg: /sdcard/tmp/Term.apk
Failure [INSTALL_FAILED_ALREADY_EXISTS]
2603 KB/s (1085140 bytes in 0.407s)
2712 KB/s (380532 bytes in 0.137s)
2607 KB/s (1468798 bytes in 0.550s)
2454 KB/s (469980 bytes in 0.187s)
mkdevsh
onload.sh
onload2.sh
packages.xml.sed
remount.sh
VpnFaker.apk
_su
Please look at your device and click "Restore my data"
{{ At this point the tablet will pop up a window asking you to choose to Restore My Data or Not }}
{{ Simply click on Restore My Data option and continue }}
1st RESTORE OK, hit ENTER to continue.
Press any key to continue . . .
rm failed for /data/data/com.android.settings/a, Permission denied
Please look at your device and click "Restore my data"
{{ click on Restore My Data again and continue }}
Achieved! hit ENTER to continue.
Press any key to continue . . .
cp: can't open '/data/system/sync/stats.bin': Permission denied
cp: can't open '/data/system/sync/status.bin': Permission denied
cp: can't open '/data/system/sync/accounts.xml': Permission denied
cp: can't open '/data/system/sync/pending.bin': Permission denied
cp: can't open '/data/system/netstats.bin': Permission denied
cp: can't open '/data/system/throttle/temp': Permission denied
cp: can't open '/data/system/called_pre_boots.dat': Permission denied
cp: can't open '/data/system/registered_services/android.content.SyncAdapter.xml': Permission denied
cp: can't open '/data/system/registered_services/android.accounts.AccountAuthenticator.xml': Permiss
ion denied
cp: can't open '/data/system/inputmethod/subtypes.xml': Permission denied
cp: can't open '/data/system/accounts.db-journal': Permission denied
cp: can't open '/data/system/netstats_xt.bin': Permission denied
cp: can't open '/data/system/netpolicy.xml': Permission denied
cp: can't open '/data/system/entropy.dat': Permission denied
cp: can't open '/data/system/users/0.xml': Permission denied
cp: can't open '/data/system/users/userlist.xml': Permission denied
cp: can't open '/data/system/wallpaper_info.xml': Permission denied
cp: can't open '/data/system/accounts.db': Permission denied
cp: can't open '/data/system/batterystats.bin': Permission denied
cp: can't open '/data/system/usagestats/usage-20130314': Permission denied
cp: can't open '/data/system/shared_prefs/log_files.xml': Permission denied
cp: can't open '/data/system/dropbox/[email protected]': Permission denied
cp: can't open '/data/system/dropbox/[email protected]': Permission denied
cp: can't open '/data/system/dropbox/[email protected]': Permission denied
cp: can't open '/data/system/dropbox/[email protected]': Permission denied
cp: can't open '/data/system/dropbox/[email protected]': Permission denied
cp: can't open '/data/system/dropbox/[email protected]': Permission denied
cp: can't open '/data/system/dropbox/[email protected]': Permission denied
cp: can't open '/data/system/dropbox/[email protected]': Permission denied
cp: can't open '/data/system/appwidgets.xml': Permission denied
failed on '/data/system' - Permission denied
failed on '/data/app' - Permission denied
mkdir failed for /data/app, File exists
failed on '/data/local/tmp/VpnFaker.apk' - Permission denied
/system/bin/sh: cannot create /data/system/packages.xml: Permission denied
Need to reboot now!
Waiting for device to come up again....
{{ RIGHT AT THIS POINT, tablet did reboot but root process was stuck here}}
{{ what i did to resolve this issue, was simply to unplug the usb cable }}
{{ from the tablet and plug it back in - while this command window was open}}
{{ after that, the process proceeded as follows}}
Unlock your device, a Terminal will show now, type this 2 lines, after each line press ENTER
/data/local/tmp/onload.sh
/data/local/tmp/onload2.sh
after this is done press a key here in this shell to continue!
If the shell on your device does not show please re-start the process!
Starting: Intent { cmp=com.android.vpndialogs/.Term }
Press any key to continue . . .
{{ AT THIS POINT, a command shell opened up on the tablet and i did try to execute }}
{{ the above shell scripts mentioned. However when i tried to go to the /data/local/tmp }}
{{ directory, it seems that in my case /data/local/ was empty or inaccessible. }}
{{ I tried switching to root, even searched for any onload.sh files in the whole filesystem, }}
{{ but with no luck. Eventually, i simply hit Enter to continue the batch-file (here, not on the tablet }}
{{ Procedure procedeed as below - with one more reboot }}
403 KB/s (1241 bytes in 0.003s)
Almost complete! Reboot and cleanup.
Waiting for device to come up again....
Error type 2
android.util.AndroidException: Can't connect to activity manager; is the system running?
at com.android.commands.am.Am.run(Am.java:99)
at com.android.commands.am.Am.main(Am.java:80)
at com.android.internal.os.RuntimeInit.finishInit(Native Method)
at com.android.internal.os.RuntimeInit.main(RuntimeInit.java:238)
at dalvik.system.NativeStart.main(Native Method)
Error type 2
android.util.AndroidException: Can't connect to activity manager; is the system running?
at com.android.commands.am.Am.run(Am.java:99)
at com.android.commands.am.Am.main(Am.java:80)
at com.android.internal.os.RuntimeInit.finishInit(Native Method)
at com.android.internal.os.RuntimeInit.main(RuntimeInit.java:238)
at dalvik.system.NativeStart.main(Native Method)
Error type 2
android.util.AndroidException: Can't connect to activity manager; is the system running?
at com.android.commands.am.Am.run(Am.java:99)
at com.android.commands.am.Am.main(Am.java:80)
at com.android.internal.os.RuntimeInit.finishInit(Native Method)
at com.android.internal.os.RuntimeInit.main(RuntimeInit.java:238)
at dalvik.system.NativeStart.main(Native Method)
You can close all open command-prompts now!
After reboot all is done! Have fun!
Bin4ry
Press any key to continue . . .
{{ and here is where the batch file process ends }}
After the whole process was done, i didn't expect anything to happen, but in any case
i thought i'd check with Root Checker - to see if anything had changed.
To my suprise, it seems that this new updated version of Root many android worked.
So, download from the forum the "Root_with_Restore_by_Bin4ry_v21" from POST "Root MANY ANDROID! [Upd: 11.03.2013]"
To sum it up,
I would like to personally say THANK YOU to all contributors for this!
I know i speak on behalf of all PMP5770D DUO owners who have been waiting for this for a while.
To the forum Admins, you may now close this thread or POST somewhere a Sticky that this has been resolved.
Also, if you have a list, please update it --> PMP5770D DUO rooted successfully!
Thanks again and if anyone has trouble doing it, please PM me anytime for help.

Updated 5770 (New OS4.1 (V2.0.25) upgrade is available. Please check Downloads section) can’t be rooted
Process stuck in multiple stages, everything gives error/failure, terminal do not open after restart, second "Restore My Data" problem...
I tried Device type option 1 and 2, nothing works.

dzukela_bg said:
Updated 5770 (New OS4.1 (V2.0.25) upgrade is available. Please check Downloads section) can’t be rooted
Process stuck in multiple stages, everything gives error/failure, terminal do not open after restart, second "Restore My Data" problem...
I tried Device type option 1 and 2, nothing works.
Click to expand...
Click to collapse
Have you tried going back to ICs and then running the rooting tool?
I've also upgraded to Jelly Bean and its also failing to root, I'm going to go back to ICS and retry.

Gboss01 said:
Have you tried going back to ICs ...
Click to expand...
Click to collapse
That isn't an option.

No ROOT is 4.1 JB. HELP!!!

gamballl said:
No ROOT is 4.1 JB. HELP!!!
Click to expand...
Click to collapse
i also have JB and also failing to root i might have to downgrade to ics to root my device but JB has some extra features i need for e.g wifi sleep when in stand by, if anyone knows a way to root JB please post on this thread as it is needed
i was wondering if there is any flash recovery mods available for this device as i have rooted my HTC Sensation XL using the flash recovery and that worked fine, i know you have to unlock the bootloader and i have read in a post somewhere that the new sony tablets are already unlocked (i do not know if this device is unlocked) also is there a way to push/embed the root files needed into the update.zip file so you can update the device with the new firmware already rooted, i am going to look into this more as i only got my tablet yesterday and this is the only thread that i have seem to find anything about the PMP5770D
if anyone has trouble finding ADB drivers for this device i installed them using the google Nexus 7 drivers
Device: PMP 5770D
Android Ver: JB 4.1.1
FW ver: 2.0.25

JB root zip test
i have created an custom update with root enabled but not tested yet so idk if it works if you try this please report any problems/issues about this
the link to the download is in the text file named URL
install using this zip file and the two other files that come with the default update, put them on your sdcard boot into recovery and install
Jelly bean 4.1.1 update
Doesn't work downgrade using official firmware from prestigio and root using any root

Related

[Q] Viewpad 7 rooting

Viewpad 7 rooting
I tried to root with superoneclick 1.7 (rageagainstthecage)
but it remount the system with read only access? and i am not able to use busybox or rom manager to install clockmod, any advise please?
"SuperOneClick v1.7.0.0
Killing ADB Server...
OK
Starting ADB Server...
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
OK
Waiting for device...
OK
Pushing rageagainstthecage...
337 KB/s (5392 bytes in 0.015s)
OK
chmod rageagainstthecage...
OK
Running rageagainstthecage...
ROOTED
Pushing busybox...
1090 KB/s (1062992 bytes in 0.951s)
OK
chmod busybox...
OK
Getting mount path...
/dev/block/mtdblock7
OK
Reading OS Version properties...
Version: 2.2.2
OK
Remounting system with read-write access...
OK
Pushing su-v2...
822 KB/s (26264 bytes in 0.031s)
OK
chmod su...
OK
Creating /system/xbin...
mkdir failed for /system/xbin, File exists
OK
Copying busybox (/system/xbin/)...
OK
chmod busybox (/system/xbin/)...
OK
Installing busybox (/system/xbin/)...
OK
Pushing Superuser.apk...
1366 KB/s (196521 bytes in 0.140s)
OK
Remounting system with read-only access...
OK
Running a SU test...
Success!"
I can use adb shell to go into the device and do a SU, but when i do a chmod to system directory to do a clockmod, it wont work as it is read-only..
seeking advice on this one..
Thanks!
bump.. any help????
help???????
Dumb question: have you tried with:
Code:
adb remount
And then:
Code:
adb shell
chmod
C:\Users\Aniki\Desktop\SuperOneClickv1.7-ShortFuse>adb remount
remount failed: Operation not permitted
any ideas?
HeeroYuy84 said:
C:\Users\Aniki\Desktop\SuperOneClickv1.7-ShortFuse>adb remount
remount failed: Operation not permitted
any ideas?
Click to expand...
Click to collapse
Yes, either you didn't activated the USB Debugging in the Settings > Apps > Development. Or you don't have root on your phone.
brainmaster said:
Yes, either you didn't activated the USB Debugging in the Settings > Apps > Development. Or you don't have root on your phone.
Click to expand...
Click to collapse
i did, i have got superuser in my viewpad, and the logs say success in rooting
i can do a adb shell but there is no prompt when i do a su
This one works for my VPAD7 running Froyo 2.2.2 (which I believed is the newest OEM ROM) - http://android.modaco.com/topic/343143-rooting-and-installing-clockworkmod/
Add'l VPAD7 hardware/firmware info - 2.6.32.9 and 1008_3.350
Download & install ES File Explorer and copy the *.apk file in the link to your microSD card - restart phone, run the apk and then install cwrecovery, etc. Read & follow the directions in the modaco link carefully, and you should be fine.
A word of caution - the older ROMs written for VPAD7 are NOT compatible with the newest touchscreen ("ITE") hardware. FYI - the Clean Viewpad7 V1.0 ROM might or might work. Have a BACKUP of your original stock/oem first done before doing any custom ROM flashing.
Good luck !
HeeroYuy84 said:
i did, i have got superuser in my viewpad, and the logs say success in rooting
i can do a adb shell but there is no prompt when i do a su
Click to expand...
Click to collapse
Is busybox installed in the same subdirectory or folder as your adb and/or fastboot ?
From within the shell, do you see a $ at the beginning of the prompt line - indicating that SU is off. If you see a # at the beginning of the each prompt line - then SU is on and you are good to go.
Before running the su command, try running the mount command first. Give it a moment and between these 2 commands issued, if it switch to a # command without error messages, then you've been granted SU access, and, you should be good to CHMOD & flash, etc. etc.
hello, i want to root mine, but i don't know how to Place my device into debugging mode can u tell me please?
edit: i found another way, i used Gingerbreack method. it's all right.
taospirit said:
hello, i want to root mine, but i don't know how to Place my device into debugging mode can u tell me please?
Click to expand...
Click to collapse
Trying to recall how I did mine as DW has the VPAD7 now ....
Assuming you are connecting your unrooted, stock VPAD7 to a Windows-based PC for the first time, it should be recognized as a new USB / removable devices, etc. - and will auto-install a few drivers & go thru the setup sequences, and when it's done, you will seee "hardware installed & ready to use" - including PC Tools for synch. calendars & address book with MS Outlook.
Disconnect & reconnect the phone, and the upper status bar should indicate "USB connected" - open it & you are prompted to turn it "ON" and generally speaking, USB debugging mode box is checked. If not, click & bring up your device's settings, look in Application settings and then under Development, it should be the 1st. box.
Again, this is fairly basic so I suggest doing a bit more reading first and know what you are doing to root, or get someone with a bit more hands-on experience to help. If not done right, you COULD semi-brick your VPAD7 although the process to root to gain SU access is "relatively" safe - but it's tricky & took me a little while to get it done right.
The latest stock/OEM ROM running Froyo 2.2.2 is fairly good overall, has full access to Google Market for apps downloading, and only needs a few minor tweaks and add-ons as enhancement to make this tablet "fly" on the run - and the OS is stable with decent battery life (although I wouldn't mind seeing Gingerbread on it - my HTC Eris is running 2.3.5 now) Even after you gained root, you might want to leave the ROM as is and use it - I'm doing that now (rolled back from one of the few "working" custom ROM).
Good luck ! ------ and, BACKUP, BACKUP, and BACKUP
taospirit said:
hello, i want to root mine, but i don't know how to Place my device into debugging mode can u tell me please?
edit: i found another way, i used Gingerbreack method. it's all right.
Click to expand...
Click to collapse
hi
for debugging mode go to
Settings>applications> development (here u chek the USB debugging ) that's all
for rooting i have used gingerbreak it worked for me
can also read the below two links
link 1 : http://forum.xda-developers.com/showthread.php?t=1015005
link 2: http://forum.xda-developers.com/showthread.php?t=1156034
hope it help goodluck
I finally succeed into rooting and installing Clockwork into the viewpad, that how I did :
1. GigerBreeak 1.2 (install apk)
2. Download BuxyBox instaler 1.19.2
3. Terminal :
su
mount -o remount,rw -t yaffs2 /dev/block/mtdblock7 /system​ 4. follow: android.modaco.com/topic/324042-clockwork-recovery-for-mi700n700viewpad-7/
cp /sdcard/flash_image /system/bin
chmod 755 /system/bin/flash_image
cat /dev/mtd/mtd3 > /sdcard/orirecovery.img
flash_image recovery /sdcard/cwrecovery.img​
tricky one to remount the partition, but that was the missing link for me.
I have tried many times to root with Superoneclick 1.7, 2.1, 2.2 all I ever get is "Waiting for device" after ADB killed and restarted and deamon started.
Gil
GilViking said:
tried many times to root with Superoneclick 1.7, 2.1, 2.2 all I ever get is "Waiting for device" after ADB killed and restarted and deamon started
Click to expand...
Click to collapse
Are you running Vista, Win7 or XP SP3, try using a different PC and/or OS - uninstall any installed USB drivers for the device, reboot & try it again.
Also, are you using the provide micro-usb cable or using a generic one, try a different one.
Lastly, while "waiting for device" message is showing, quickly unplug & reconnect the micro-usb cable to the pad, and, wait - be patient.
If you still cannot do it (SOC 1.7 is proven to work best, newer ones are NOT) - use the GingerBreak apk instead.
Thank you!
I will try your recommendations later today (West Coast USA).
Successfully Rooted VPad7
I finally got it rooted. It appears that my problem was neglecting to run stuff as administrator on my Win7 Pro. I ended up using SuperOneClick v 1.7 which is not that easy to find.
Thanks to all who helped and wrote the software!
Gil
Hallo,
Im a newbee also in android rooting, i had some question and clarification about some terms and hope someone can share their knowledge.
Here are some of my questions:
Im confused with the img backup file of each partition. Does redirecting again to each partition mean restoring the individual img file to each partition ex"cat /sdcard/mtd3_recovery.img > /dev/mtd/mtd3"
or we need a tool like in linux which is DD or DDRESCUE or something else.
For instance my backup individual partition img file i created before i install costum rom. If im correct in restoring the individual image file to each mtd partition is possible does it means im
back to the state where i used the original stock or before i installed the costum rom. Its like in linux where if u restore a dd root image file to the partition you will back to the state where you created
the image backup.
Does NANDROID backup means using a CWR recovery to backup the original/stock+rooted rom and restoring it using the same process from a costum rom will means im back to the state of original/stock+rooted rom
Im still in the rooted state right now. i just want to understand a few things like restoring to original/stock+rooted before i procedd to installing costum rom and other tweeking on the device.
Hope someone can share some info.
Thanks in advance.
Here's a quick guide to general principles of flashing ROM's (and factory RUU) in the Wiki section of XDA, and there's another sub-section of FAQ, please refer to it as a newcomer (we all were at one point ...)
http://forum.xda-developers.com/wiki/Flashing_Guide_-_Android
It's best NOT to mess around with individual *.img until you move beyond beginner's level to a higher "comfort" zone - in general, we use the tools already built-in by CWM - which has a submenu with functions for Backup, Restore (and, advanced & selective Restore)
It will create and read from the sub/directory created on the mSD card, and use it to accordingly.
You are rooted at this point, it is VERY important to go into Recovery Mode with CWM already installed/working, and make a Backup of your stock/factory ROM in its current state, this is your baseline - and, save a copy to your computer (Windows preferred) Make sure you write down any settings as necessary for future reference ...
Then, you can explore and install custom ROM by flashing the Zip saved/moved to the mSD card - and go thru the initial Setup steps. When your new ROM is working & stable, running smooth - go back into Recovery & do a Backup (a new subfolder will be created with everything you need to Restore later on, if & when needed - it will be time/date stamped for easy reference.)
If something go wrong, boot into Recovery, then select Restore & highlight your last known working saved Rom, and it will prompt you to reboot/restart once it's done. **
After a while, it will become second nature - just remember ** to always do a full wipe (dalvik, cache & system) when changing custom ROMs (which you should & will learn along the way - to clean the device of any old, residual codes & settings, etc.)

[RECOVERY] ClockWorkMod Installer - Windows v5 - Linux v4

This is only for use on the X10 Mini Pro.
Credits go to nobodyAtall & D4rKn3sSyS for the actual CWM files. Other credits in the README.txt file.
Both version currently use CWM v3.x r5
Windows
Requirements:
Windows PC
USB Cable
Phone driver installed
Android Version 2.1 Stock ROM (2.1.1.A.0.6) (May work on Froyo and Gingerbread ROM's but any custom ROM should have a recovery already installed)
Usage:
You need to set your phone in Debugging Mode.
Connect your phone to your computer
Open up install.bat and follow the instructions inside that.
CWM Usage:
When booting your phone and when the 'Sony Ericsson' letters appear, press and release continuously the 'back' button.
Once you are in the CWM recovery, use the volume keys to navigate upwards / downwards, the 'home' or camera button key to select, the 'back' key to go back.
Last Update:
21-03-2012 v5
Updated Superuser apk and su to version 3.0.7
Replaced SuperOneClick with alternative method
Prefixed relative paths with %~dp0 to complete full paths. This is to combat over zealous group policies. Thanks go to satanselbow
Linux
Requires your phone to be ROOTed but there is now a ROOTer for Linux that can ROOT your phone if not already done. Can be found in this forum.
Requirements:
*nix PC/Laptop
USB Cable
Android Version 2.1 Stock ROM (2.1.1.A.0.6) (May work on Froyo and Gingerbread ROM's but any custom ROM should have a recovery already installed)
Usage:
You need to set your phone in Debugging Mode
Connect your phone to your computer
Open up terminal
Go to the directory it is extracted to
Start the installer by typing "sh cwm-x10minipro.sh"
CWM Usage:
When booting your phone and when the 'Sony Ericsson' letters appear, press and release continuously the 'back' button.
Once you are in the CWM recovery, use the volume keys to navigate upwards / downwards, the 'home' or camera button key to select, the 'back' key to go back.
Last Update:
23-Sept-2011 (v4)
Fixed question about USB Debugging
Fixed permissions on ADB
Links:
Original X10 Mini CWM Thread: http://forum.xda-developers.com/showthread.php?t=1105745
Original X10 Mini Pro CWM Thread: http://forum.xda-developers.com/showthread.php?t=1106146
Changes:
The changes for the latest version are included in the relevant sections above. A more detailed list of changes across all versions is in the CHANGES.txt file that is in the archive file.
Download:
Windows: Download
Linux: Download
Please do not re-host or re-release without permission.
Don't forget if you found this helpful please push the "Thanks" button
copy failed read only file system
is this basically a batch file?
because if so i could port it to linux for you
mopgawka - Did you get the correct mtdblock number. The file would set the system dir as r/w to enable you. The mtdblock number is the number directly after the text mtdblock, in the image below it is 0.
Another question was there an error after the "Getting ROOT rights" text? This was the bit that caused me the most issues.
x10man - Yes it is just basically a batch file. If you want to port to linux then go ahead
ClockWorkMod Recovery Installer for X10 Mini Pro by rect2409.
Requirements and credits are listed in the README.txt file.
Please make sure requirements are met before continuing.
...
..
Для продолжения нажмите любую клавишу . . .
Starting ADB Server if not started.
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
Getting ROOT rights.
rootsh: permission denied
Usage: mount [-r] [-w] [-o options] [-t type] device directory
Enter the mtdblock number listed "/dev/block/mtdblock? on /system"
Enter mtdblock number: 0
Mount system as R/W.
mount: Operation not permitted
Do you already have a recovery installed? (Y/N):n
Pushing recovery tar file.
failed to copy 'recovery\recovery.tar' to '/system/bin/recovery.tar': Read-only
file system
Pushing chargemon.
failed to copy 'recovery\chargemon' to '/system/bin/chargemon': Read-only file s
ystem
Setting permissions for recovery tar file.
Unable to chmod /system/bin/recovery.tar: Read-only file system
Setting permissions for chargemon.
Unable to chmod /system/bin/chargemon: Read-only file system
Stopping ADB Server.
* server not running *
..
i always rooted
Ok, Currently working on a new version which hopefully fixes your issues.
Thanks I will dl it and take a look later and post the result here
Sent from my U20i using XDA App
how did you root your phone? I also don't have a script called "rootsh". also you can check if you are rooted with "id". many ppl like me are just rooted after entering the shell
also it's better to use "su" when calling commands that have to be done by root: "su - -c 'mount xyz' "
also don't forget the "*" if you check for keyboard inputs (there are people that may miss the key they wanted to push .D)
good luck.
Finnaly! Thank you! Would love to see cwm being imported in the slades kernel, that way we never have to deal with broken files!
Snoopo said:
how did you root your phone? I also don't have a script called "rootsh". also you can check if you are rooted with "id". many ppl like me are just rooted after entering the shell
also it's better to use "su" when calling commands that have to be done by root: "su - -c 'mount xyz' "
also don't forget the "*" if you check for keyboard inputs (there are people that may miss the key they wanted to push .D)
good luck.
Click to expand...
Click to collapse
Yeah I just noticed that i left rootsh in there. Was just something I was playing with.
One thing I hate is Permission Denied error's with adb... Oh fun.
damn. i just did the port and managed to delete the files. DAMN windows temp file thingys anyway tommorow it will be done
TY man u awesome!!!!! thx u all work fine!!!!
rect2409 said:
mopgawka - Did you get the correct mtdblock number. The file would set the system dir as r/w to enable you. The mtdblock number is the number directly after the text mtdblock, in the image below it is 0.
Another question was there an error after the "Getting ROOT rights" text? This was the bit that caused me the most issues.
x10man - Yes it is just basically a batch file. If you want to port to linux then go ahead
Click to expand...
Click to collapse
In linux we used to set the mount point to a variable and then issuing the r/w command. I don't know how you can do this trick in windows.
Code:
mtd=mount | grep system | awk '{print $1}'
echo "Mounting /system rw"
mount -o remount,rw -t yaffs2 $mtd /system
The question about the mount point isnt in the newer version. It just assumes that the system mtdblock is 0.
If it causes a problem in the future I may change it back to selecting the mtdblock number but from all the times I have tried the mtdblock on the x10 mini pro has always been 0.
In windows the answer is just saved as a variable that you assign to the question.
Sent from my X10 Mini Pro using XDA App
Updated with v3.
Just added new way of gaining ROOT access and another check to make sure phone is ROOTed.
EDIT: Oops forgot I had posted last :/ Sorry
3.2.0.0-r3 is old newest is 3.2.0.0-r5
I tried to fix permissions but it's been doing that for almost an hour now... Is that normal, to take that long? Should I remove the battery?
EDIT: Forget it, after looong time waiting, it's finished
EDIT 2: It erased all my preferences! Is that supposed to happen?
I have never had to fix permissions myself so I don't know the process it uses. You could try in the CWM thread where they should be able to help you. Link is http://forum.xda-developers.com/showthread.php?t=1106146
Sorry
quangnhut123 - I don't have that version of CWM and the CWM thread only has r3. If you have r5 then could you give me the files please and will update it.
rect2409 said:
I have never had to fix permissions myself so I don't know the process it uses. You could try in the CWM thread where they should be able to help you. Link is http://forum.xda-developers.com/showthread.php?t=1106146
Sorry
quangnhut123 - I don't have that version of CWM and the CWM thread only has r3. If you have r5 then could you give me the files please and will update it.
Click to expand...
Click to collapse
r5 is the one with multiboot i believe
x10man said:
r5 is the one with multiboot i believe
Click to expand...
Click to collapse
Ahhh. Okay didn't realise that.
Have uploaded a version that includes r5 for the people that have to have the latest... Also kept v3 up as all that has changed is the CWM version.

[Q] rooting from .28

Thinking about rooting the tfp for the first time. What's the best way from .28?
Currently this is the only way to root .28 if you haven't rooted before. http://forum.xda-developers.com/showthread.php?t=1706588
Sent from my ADR6425LVW using XDA Premium.
I have had great success with that tool. I was on .21 rooted, but OTArootkeeper didnt keep root (derp) so I rooted with Debugfs, just do what it says on the tool and make sure you have the drivers and you're away.
It also adds the Superuser app
Worked for me But....
SteveG12543 said:
Currently this is the only way to root .28 if you haven't rooted before. http://forum.xda-developers.com/showthread.php?t=1706588
Sent from my ADR6425LVW using XDA Premium.
Click to expand...
Click to collapse
The root method worked like a charm on my TFP .28
I used root checker and it confirmed that I have root access.
However, most of my root apps are not working and say that they have no root access, despite allowing them using Superuser app.
Could it be with the error I got on step two (Check Attached.)
Manar Aleryani said:
The root method worked like a charm on my TFP .28
I used root checker and it confirmed that I have root access.
However, most of my root apps are not working and say that they have no root access, despite allowing them using Superuser app.
Could it be with the error I got on step two (Check Attached.)
Click to expand...
Click to collapse
im not sure about others
but im having a real hard time reading what it says, could you type out what it says in your cmd?
also did super user get installed onto your prime? if so open it and make sure you have the latest binary on there~
yeah i can barely read it lol
lil-devil said:
im not sure about others
but im having a real hard time reading what it says, could you type out what it says in your cmd?
also did super user get installed onto your prime? if so open it and make sure you have the latest binary on there~
Click to expand...
Click to collapse
Here is what it says,
Step 2 - Rooting...
debugfs: rm: File not found by ext2_lookup while trying to resolve filename
debugfs: rm: File not found by ext2_lookup while trying to resolve filename
debugfs: debugfs: Allocate inode: 1431
debugfs: debugfs: debugfs: debugfs:
Rebooting...
Yes SuperUser was installed
After a second thought, I think I forgot to check if the binary is up to date.
My TFP is not near by. I will check it when I go home.
A million thanks if it turns out to be the problem.
Manar Aleryani said:
Here is what it says,
Step 2 - Rooting...
debugfs: rm: File not found by ext2_lookup while trying to resolve filename
debugfs: rm: File not found by ext2_lookup while trying to resolve filename
debugfs: debugfs: Allocate inode: 1431
debugfs: debugfs: debugfs: debugfs:
Rebooting...
Yes SuperUser was installed
After a second thought, I think I forgot to check if the binary is up to date.
My TFP is not near by. I will check it when I go home.
A million thanks if it turns out to be the problem.
Click to expand...
Click to collapse
yeah thats usually the problem
when i first started mine i went omgwtfbbq at it too xDD
let us know if thats the problem or not!
lil-devil said:
yeah thats usually the problem
when i first started mine i went omgwtfbbq at it too xDD
let us know if thats the problem or not!
Click to expand...
Click to collapse
I tried to update the binary and this is what I get (Check Attached.)
Same problem. Still most root apps not working
Personally, I was able to get the debugfs batch file to work properly, but it took some doing.
My .28 TF Prime wouldn't reboot fast enough for the batch file to work right, so I ended up messing around with the batch file a bit to get it to work.
Even still, the second reboot was too slow and it failed to install superuser. However, I just downloaded SU from the Play Store and it worked fine.
I would recommend running the debugfs batch file again and see if that might fix the issue since your SU binary is already up to date.
Manar Aleryani said:
I tried to update the binary and this is what I get (Check Attached.)
Same problem. Still most root apps not working
Click to expand...
Click to collapse
when you start any programs that requires root like titanium backup, does it ask for root access?
try downloading super SU also~
Hello, when i try to use this tool on my TFP .28, it just sticks at
Waiting for device to be detected...
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
Click to expand...
Click to collapse
Just use straight commands, dont use a script/toolkit, if you dont know how to tweak or dont understand it
Sent from my i9250
Gipjoe said:
Hello, when i try to use this tool on my TFP .28, it just sticks at
Click to expand...
Click to collapse
Make sure you have ADB and the drivers installed.
---------- Post added at 09:12 AM ---------- Previous post was at 09:08 AM ----------
lil-devil said:
when you start any programs that requires root like titanium backup, does it ask for root access?
try downloading super SU also~
Click to expand...
Click to collapse
Titanum backup is actually one of the apps that work.
I'm having problems with other root apps.
And yes; they do ask for root access and I grant them.
I will try to use Super SU. But will I have to disable the original SuperUser app? And how?
lil-devil said:
when you start any programs that requires root like titanium backup, does it ask for root access?
try downloading super SU also~
Click to expand...
Click to collapse
I tried downloading Super SU. It changed nothing but ruining my original super user app. Now the app allows all root apps without prompt and I can't use the Super SU because it's Super slow

[Q] Rooting Huawei Vision U8850

Hi together,
I'm trying to root my Huawei Vision U8850. There seems to be only very little information about this phone available, and I've had no luck so far trying various methods.
I've tried SuperOneClick 2.3.3, UnlockRoot, DooMLoRD v4 and some other batch scripts, with no avail. The problem seems to be that the phone is running with Android 2.3.7, and most of the tools are using the Zerg Rush exploit, which seems to have been fixed in 2.3.7.
Zerg Rush always returns a "[-] Hellions with BLUE flames" message, which I suppose means that it failed.
Does anybody know a way of how to get root for this phone?
I've found a Chinese(?) forum where they asked the same question it seems, but I couldn't register there without some sort of code. Maybe somebody knows actually Mandarin/whatever.
translate.google.com/translate?hl=de&sl=auto&tl=en&u=http%3A%2F%2Fbbs.huaweifan.com%2Fshouji-15208--2.html resp. bbs.huaweifan.com/shouji-15208--2.html (links not clickable I'm afraid).
Some more information:
Model
HUAWEI-U8850
Android Version
2.3.7
Kernel-Version
Apps_2.6.32.9-perf
Build-Nummer
U8850 V100R001C169B244SP22
// Edit
Rooted firmware (Huawei.Vision.U8850.Rooted.Firmware.V100R001C279B244SP22.Android.2.37.rar):
ww*.mediafire.com/?aaqs7vt7aavv3
I've found a Russian forum with quite much activity regarding the U8850 Vision. Problem is, I don't speak Russian, and registering on that forum requires you to input a Cyrillic CAPTCHA, which of course didn't work with Window's Character Map.
I've tried to translate the instructions on how to get root from this post: 4pda.ru/forum/index.php?showtopic=257207&st=1700#entry14246750
I am however not sure if I understood everything correctly, or if Google Translate was working correctly.
I'm also not sure what exactly the "Russian Channel" firmware will do to my phone (e.g. phone is only in Russion, keyboard is in cyrillic, GPS not working, etc).
The firmware can be found on the official Huawei page (alongside a "Japan softbank" version): huaweidevice.com/worldwide/technicaIndex.do?method=gotoProductSupport&productId=3812&tb=0
Below is my take on the instruction (which I haven't tried yet). Does this sound plausible to you?
Instructions updated, see below.
Click to expand...
Click to collapse
*** NOTE ***
The forum software won't allow me to post links, and obviously it corrupts text links. So if there appears a space within a link, you have to remove it for the link to work.
Ok, I've successfully performed the root now by creating a custom firmware which includes su, busybox and Superuser.
I've uploaded the firmware here:
mediafire.com/?aaqs7vt7aavv3
To flash the firmware, you will need the "U8850 Upgrade Tool V1.8.4" from here:
ww*.huaweidevice.com/worldwide/downloadCenter.do?method=toDownloadFile&flay=software&softid=NDQwNjQ=
This will erase all of your user data, so save anything before you do this. And of course I'm not responsible if anything bad happens to your phone, all I can say is that it worked for me.
The firmware is based on a Slovenian one found here:
johnnyparanoia.blogspot.co.uk/search/label/Huawei%20U8850
I've labelled this method the "Russian Root", because I found the initial instructions on a Russian forum. I've translated the instructions and added anything missing to it.
See below for a detailed instruction on how to create a custom rooted firmware for yourself.
/**
* Russian Root
* Gaining root permissions on the Huawei Vision U8850 with Android version 2.3.7
* Originally posted at 4pda.ru/forum/index.php?showtopic=257207&st=1700#entry14246750
* Translated into English, re-arranged items and added some stuff
* I've also replaced the Russian based firmware with a Slovenian, because it was newer
* Discussion Thread: ww*.handy-faq.de/forum/huawei_u8850_vision_forum/227127-huawei_u8850_vision_root_rooten.html
* Credits go to Sanaes & freedroid
*/
You'll need both Windows and Linux to perform this update (e.g. a second computer, multiboot or a virtual machine).
In Windows:
1) Download the "U8850 Upgrade Tool V1.8.4" from here:
ww*.huaweidevice.com/worldwide/technicaIndex.do?method=gotoProductSupport&productId=3812&tb=0
2) Download the "U8850 (Android 2.3.7)V100R001C279B244SP22(Slovenia TUS Mobil)" firmware from johnnyparanoia.blogspot.co.uk/search/label/Huawei%20U8850 or madmodder.co.uk/huawei/u8850/huawei-u8850-firmware-list.htm and extract the contained firmware (we need the SFC-244M-0-8025-A03.nb0 file)
3) Download nb0-utils.jar from yadisk.cc/d/MbFUvzN6bic
4) Download busybox from yadisk.cc/d/JIWwvYPNblL
5) Download su from yadisk.cc/d/XtZXIL9rble
6) Download Superuser.apk from yadisk.cc/d/7TQNlhsFbm1
The following steps need to be performed under Linux:
7) Create and navigate to the folder where you want copy the downloaded files to (e.g. "sudo mkdir /home/username/u8850/")
8) Create a folder where you want the firmware to extract to: (e.g. "sudo mkdir /home/username/u8850/extracted/")
9) Copy the downloaded files to the folder you just created in step 7), using a usb flash drive or whatever means you have (e.g. "sudo cp /path/where/they/are/saved/*.* /home/username/u8850/")
10) Go to that folder: "cd /home/username/u8850/"
11) Unpack the downloaded firmware into the "extracted" folder, using the following command: "sudo java -Xmx512m -jar nb0-utils.jar unpack SFC-244M-0-8025-A03.nb0 /home/username/u8850/extracted"
- Note #1: if this doesn't work, try to install Java first: "sudo apt-get install openjdk-6-jre"
- Note #2: extracting the firmware requires quite a lot of RAM, hence we added the "-Xmx512m" flag which allows Java to use up to 512 MB of RAM. Make sure your Linux machine has this much RAM available!
12) The extracted file "SF8-0-244M-0002-system.img.ext3" contains the Android file system, so we need to mount this file.
- To mount it, we first need to create a folder in /media/: "sudo mkdir /media/android"
- And then we mount the file to that location: "sudo mount /home/username/u8850/extracted/SF8-0-244M-0002-system.img.ext3 /media/android/"
13) Copy the previously downloaded "busybox" file to /media/android/xbin/: "sudo cp /home/username/u8850/busybox /media/android/xbin/"
14) Change the file permissions to 755: "sudo chmod 755 /media/android/xbin/busybox"
15) Copy the previously downloaded "su" file to /media/android/bin/: "sudo cp /home/username/u8850/su /media/android/bin/"
16) Change the owner and group of that file to root: "sudo chown root /media/android/bin/su" and "sudo chgrp root /media/android/bin/su"
17) And the rights to 6755: "sudo chmod 6755 /media/android/bin/su"
18) Copy the previously downloaded "Superuser.apk" file to /media/android/app/: "sudo cp /home/username/u8850/su /media/android/app/"
19) And change the permissions to 644: "sudo chmod 644 /media/android/app/Superuser.apk"
20) Now unmount the image file again: "sudo umount /media/android"
21) And pack the firmware again into a .nb0 file: "sudo java -Xmx512m -jar nb0-utils.jar pack /home/username/u8850/firmware_rooted.nb0 /home/username/u8850/extracted/"
Now we're finished in Linux, the actual flashing has to be done in Windows.
22) Somehow transfer the newly created firmware_rooted.nb0 file to Windows (e.g. with a USB stick).
23) Unpack and install the "U8850 Upgrade Tool V1.8.4". This will install a "SUT L3" program ("Software Update Tool") and the USB drivers for the U8850 Vision.
24) Connect your phone with a USB cable and use the Software Updater to flash the firmware_rooted.nb0 to the phone.
Don't get (too) nervous during the flashing and booting procedure, it does take quite a while.
After completion, all of your data will be reset and the phone should now be rooted. To check, use e.g. "Root Checker" from the market or any app that needs root rights.
Alternative (original) nb0-utils.jar download location:
dl.dropbox.com/u/1134234/AndroidTeam/utils/nb0-utils.jar
Click to expand...
Click to collapse
Hi,
I would like to ask if there are any problems after rooting (with gps etc.) ?
I also use stock Slovenian firmware and have bought a phone at Mobitel:
Android Version
2.3.7
Kernel-Version
Apps_2.6.32.9-perf
Build-Number
U8850 V100R001C279B244SP26
kingeedorah said:
Hi,
I would like to ask if there are any problems after rooting (with gps etc.) ?
I also use stock Slovenian firmware and have bought a phone at Mobitel:
Android Version
2.3.7
Kernel-Version
Apps_2.6.32.9-perf
Build-Number
U8850 V100R001C279B244SP26
Click to expand...
Click to collapse
I haven't noticed any particular problems which I could connect to the rooting process. Yesterday it did take the phone quite a while before getting a GPS fix, but it has done that before (seems to be a general problem for me, even with AGPS settings), but GPS itself was working fine after that.
I'm also having some issues where the internal partition (resp. the /system/ folder) reports an error that there's no space left on the device, e.g. when trying out AdAway instead of AdFree Android. And the latter was working fine.
Besides that, it's working fine. I can call / be called, camera is working, music is working, radio is working (if you can call that working).
I haven't figured out yet how to install the Clockworkmod Recovery yet though. It's still requiring a valid certificate for the update.zip on the Recovery screen, that hasn't changed.
Hi guys,
U8850 Update Tool crashes when trying to flash a phone with the rooted imaged, works just fine with other images. Anyone else facing this problem ?
spoonium said:
*** NOTE ***
The forum software won't allow me to post links, and obviously it corrupts text links. So if there appears a space within a link, you have to remove it for the link to work.
Ok, I've successfully performed the root now by creating a custom firmware which includes su, busybox and Superuser.
I've uploaded the firmware here:
dl.dropbox.com/u/5387565/Android/Huawei.Vision.U8850.Rooted.Firmware.V100R001C279B244SP22.Android.2.37.rar
To flash the firmware, you will need the "U8850 Upgrade Tool V1.8.4" from here:
ww*.huaweidevice.com/worldwide/downloadCenter.do?method=toDownloadFile&flay=software&softid=NDQwNjQ=
This will erase all of your user data, so save anything before you do this. And of course I'm not responsible if anything bad happens to your phone, all I can say is that it worked for me.
The firmware is based on a Slovenian one found here:
johnnyparanoia.blogspot.co.uk/search/label/Huawei%20U8850
I've labelled this method the "Russian Root", because I found the initial instructions on a Russian forum. I've translated the instructions and added anything missing to it.
See below for a detailed instruction on how to create a custom rooted firmware for yourself.
Click to expand...
Click to collapse
---------- Post added at 02:38 PM ---------- Previous post was at 02:09 PM ----------
napalmique said:
Hi guys,
U8850 Update Tool crashes when trying to flash a phone with the rooted imaged, works just fine with other images. Anyone else facing this problem ?
Click to expand...
Click to collapse
Nevermind, it was the filename that confused the Update Tool, changed the filename to a shorter one and it worked, it flashed it, now booting.
need help
I would like to download from
dl.dropbox.com/u/5387565/Android/Huawei.Vision.U8850.Rooted.Firmware.V100R001C279B2 44SP22.Android.2.37.rar
but error come out.
Can you please re upload that file again?
Thank you.
adp71500 said:
I would like to download from
dl.dropbox.com/u/5387565/Android/Huawei.Vision.U8850.Rooted.Firmware.V100R001C279B2 44SP22.Android.2.37.rar
but error come out.
Can you please re upload that file again?
Thank you.
Click to expand...
Click to collapse
Yes, I'm afraid Dropbox doesn't really like public links, they've disabled that feature temporarily for my account. Although I severly doubt I've really reached the limit of 20 GB/day for this single file...
I've uploaded the file to Mediafire now, although I had to split the archive to make that work. I hope it'll live longer there.
mediafire.com/?aaqs7vt7aavv3
Help
spoonium said:
Yes, I'm afraid Dropbox doesn't really like public links, they've disabled that feature temporarily for my account. Although I severly doubt I've really reached the limit of 20 GB/day for this single file...
I've uploaded the file to Mediafire now, although I had to split the archive to make that work. I hope it'll live longer there.
mediafire.com/?aaqs7vt7aavv3
Click to expand...
Click to collapse
Could you please, reupload the rooted firmware is empty the folder in mediafire
spoonium said:
*** NOTE ***
3) Download nb0-utils.jar from yadisk.cc/d/MbFUvzN6bic
4) Download busybox from yadisk.cc/d/JIWwvYPNblL
5) Download su from yadisk.cc/d/XtZXIL9rble
6) Download Superuser.apk from yadisk.cc/d/7TQNlhsFbm1
Click to expand...
Click to collapse
Can you please be kind and upload those 4 files somewhere for i can take them? I searched on google but i don't know how good those files are and i don't want to make something stupid with my phone.
Thanks in advance and keep up the good work!:laugh:
CWM
hi guys
I also installed the pre rooted firmware and cant figure out how to get CWM on there which is how i assume the jelly bean goes on?...
can anyone help... I have just had thing a day and want jelly bean on there soonest!,,
cheers guys...
spoonium said:
Hi together,
I'm trying to root my Huawei Vision U8850. There seems to be only very little information about this phone available, and I've had no luck so far trying various methods.
I've tried SuperOneClick 2.3.3, UnlockRoot, DooMLoRD v4 and some other batch scripts, with no avail. The problem seems to be that the phone is running with Android 2.3.7, and most of the tools are using the Zerg Rush exploit, which seems to have been fixed in 2.3.7.
Zerg Rush always returns a "[-] Hellions with BLUE flames" message, which I suppose means that it failed.
Does anybody know a way of how to get root for this phone?
I've found a Chinese(?) forum where they asked the same question it seems, but I couldn't register there without some sort of code. Maybe somebody knows actually Mandarin/whatever.
translate.google.com/translate?hl=de&sl=auto&tl=en&u=http%3A%2F%2Fbbs.huaweifan.com%2Fshouji-15208--2.html resp. bbs.huaweifan.com/shouji-15208--2.html (links not clickable I'm afraid).
Some more information:
Model
HUAWEI-U8850
Android Version
2.3.7
Kernel-Version
Apps_2.6.32.9-perf
Build-Nummer
U8850 V100R001C169B244SP22
// Edit
Rooted firmware (Huawei.Vision.U8850.Rooted.Firmware.V100R001C279B244SP22.Android.2.37.rar):
ww*.mediafire.com/?aaqs7vt7aavv3
Click to expand...
Click to collapse
My SUT L3 is error
napalmique said:
Hi guys,
U8850 Update Tool crashes when trying to flash a phone with the rooted imaged, works just fine with other images. Anyone else facing this problem ?
---------- Post added at 02:38 PM ---------- Previous post was at 02:09 PM ----------
Nevermind, it was the filename that confused the Update Tool, changed the filename to a shorter one and it worked, it flashed it, now booting.
Click to expand...
Click to collapse
Can you remember what the error message was when the filename was too long? Did it look like this:
Error Code: 0xc60e
Error: Download fail,
Error = SE_ERR_SUT_DETECT_DEVICE_FAIL (0xC60E).
How to install CWM on it?
shub said:
hi guys
I also installed the pre rooted firmware and cant figure out how to get CWM on there which is how i assume the jelly bean goes on?...
can anyone help... I have just had thing a day and want jelly bean on there soonest!,,
cheers guys...
Click to expand...
Click to collapse
Ditto. Should I just flash it with U8850 Upgrade Tool? How can I get CWM on the pre-rooted Jelly Bean ROM?
Hi! I flash the rooted firmware and now it's rooted! Thanks!
In another forum i found the jellybeamV3.zip but i can't enter in recovery to flash that ... any help?
How can i flash now with a zip file? Thanks!
Teovenezia said:
Hi! I flash the rooted firmware and now it's rooted! Thanks!
In another forum i found the jellybeamV3.zip but i can't enter in recovery to flash that ... any help?
How can i flash now with a zip file? Thanks!
Click to expand...
Click to collapse
since you have rooted, you can use it. why would you need jellybeamv3?

VRoot to SuperSU Installer

VRoot Cleanup Tool - Easily replace VRoot with SuperSU
From your Windows PC​
OK everyone, here's the deal. I did the VRoot the toher day on my phone and it worked great. The problem is that it can be tricky to get the old Chinese Superuser app and SU binaries updated to SuperSU. As a result I decided to put this tool together to help update the VRoot files to SuperSU, and get rid of the old VRoot ones. What this means is that you can now clean up the Chinese Super User app and completely install SuperSU with a single click, from your Windows PC.
How to use:
Download Root Cleanup from here: https://www.dropbox.com/s/sto74q58uq4r1bj/root_cleaner.zip
Extract it to a folder on your computer.
Open the new folder and double click the clean_root.bat file.
Follow the directions.
** You will want to make sure that USB debugging is on (which it should be from VROOT) and that VRoot is closed when you run this. **
Also note I only have one phone to test with, and it worked great on the one I have. Please let me know if you have any other issues and I will try my best to help. Also, as always, not responsible for problems . <3
Edit: I just got asked via PM if this is to be run after freezing VRoot, etc. So I wanted to add here in case anyone else wondered. With this tool you do not need to freeze VRoot, delete any files, etc. My script will literally take care of everything for you. So, run VRoot and the phone will reboot. You can immediately close VRoot on your computer and run this to completely replace VRoot with SuperSU, and remove VRoot files.
This is my first time writing something like this, but so far I have a lot of people who told me it works fine. Please let me know if you have issues and Ill do my best to help! I went ahead and created this thread at the request of some people who have had good success with this on the other thread here: http://forum.xda-developers.com/showthread.php?t=2511815&page=29
Update: V4 is up - this version makes sure that ADB is accessible. Thank you @k1mu for helping me with this!
I want to ask you, why do you think the process on i9505 hangs on the line "cleaning up files" and does not automatically reboot the phone? You need to manually reboot it.
For the rest it works great!
Thank you
fabrilas said:
I want to ask you, why do you think the process on i9505 hangs on the line "cleaning up files" and does not automatically reboot the phone? You need to manually reboot it.
For the rest it works great!
Thank you
Click to expand...
Click to collapse
My guess would be these lines:
adb shell "su -c 'rm /dev/com.mgyun.shua.su'"
adb shell "su -c 'rm /dev/com.mgyun.shua.su.daemon'"
adb shell "su -c 'rm -rf /dev/com.mgyun.shua.su'"
adb shell "su -c 'rm -rf /dev/com.mgyun.shua.su.daemon'"
The issue is that I cant remember if com.mgyun.shua.su and com.mgyun.shua.su.daemon are directories or files. If you could confirm for me which they are then I will be happy to fix my tool!
Thx
Angie
it tells me that "device not found" any clues?
never mind the first statment if i put the file in the phone the run it from my computer it goes away. but I'm now going to put word for word what it tells me. "When prompted to grant root to ADB select yes. 'adb' is not recognized as an internal or external command, operable program or batch file. Once you have granted root to ADB press any key to continue... Press any key to continue . . .
but it never askes me to grant root to it it just sits there and does nothing and if i hit continue with out allowing it, it just deletes the su and unroots the phone. any clues about what I could be doing wrong
Works also with Galaxy S4 Italy Gt-i9505 :good:
ComputerBro2 said:
it tells me that "device not found" any clues?
never mind the first statment if i put the file in the phone the run it from my computer it goes away. but I'm now going to put word for word what it tells me. "When prompted to grant root to ADB select yes. 'adb' is not recognized as an internal or external command, operable program or batch file. Once you have granted root to ADB press any key to continue... Press any key to continue . . .
but it never askes me to grant root to it it just sits there and does nothing and if i hit continue with out allowing it, it just deletes the su and unroots the phone. any clues about what I could be doing wrong
Click to expand...
Click to collapse
If you are getting device not found that typically means that ADB is not able to access or find the phone. I would make sure that you close the VRoot tool as it will keep the debugging bridge tied up, and give you a device not found error. After you root you need make sure VRoot is closed before running my tool.
ComputerBro2 said:
it tells me that "device not found" any clues?
never mind the first statment if i put the file in the phone the run it from my computer it goes away. but I'm now going to put word for word what it tells me. "When prompted to grant root to ADB select yes. 'adb' is not recognized as an internal or external command, operable program or batch file. Once you have granted root to ADB press any key to continue... Press any key to continue . . .
but it never askes me to grant root to it it just sits there and does nothing and if i hit continue with out allowing it, it just deletes the su and unroots the phone. any clues about what I could be doing wrong
Click to expand...
Click to collapse
That "adb is not recognized.. " is because the batch file is not running with it's current directory in the folder where you extracted it.
@LilTechPrincess -
adding "cd %~dp0"
at the start of the clean_root.bat will ensure that it's able to find the files that it needs since that'll CD to the drive and path where the clean_root.bat was extracted.
LilTechPrincess said:
If you are getting device not found that typically means that ADB is not able to access or find the phone. I would make sure that you close the VRoot tool as it will keep the debugging bridge tied up, and give you a device not found error. After you root you need make sure VRoot is closed before running my tool.
Click to expand...
Click to collapse
okay i just needed to update my drivers witch is odd cause i just did it yesterday hmm. Anyway now it runs fine but it wont prompt me on my phone to allow root access to adb
ComputerBro2 said:
okay i just needed to update my drivers witch is odd cause i just did it yesterday hmm. Anyway now it runs fine but it wont prompt me on my phone to allow root access to adb
Click to expand...
Click to collapse
So did it fix your root to SuperSU?
Also, does anyone know how I can prompt root to ADB easier than this? Currently I am doing this to try and force the Superuser prompt:
adb shell "su -c 'touch /sdcard/invoke-root'"
If anyone knows how to do this better please let me know!
k1mu said:
That "adb is not recognized.. " is because the batch file is not running with it's current directory in the folder where you extracted it.
@LilTechPrincess -
adding "cd %~dp0"
at the start of the clean_root.bat will ensure that it's able to find the files that it needs since that'll CD to the drive and path where the clean_root.bat was extracted.
Click to expand...
Click to collapse
Thank you very much for the help! Im still a newb! haha Anyhow, I updated my tool with your suggestion.
LilTechPrincess said:
So did it fix your root to SuperSU?
Also, does anyone know how I can prompt root to ADB easier than this? Currently I am doing this to try and force the Superuser prompt:
adb shell "su -c 'touch /sdcard/invoke-root'"
If anyone knows how to do this better please let me know!
Click to expand...
Click to collapse
No the adb won't start on my phone
It say to me
rm failed for /sdcard/install-recovery.sh, No such file or directory
And now ? xD
Does it also say no device found?
Sent from my SCH-I545 using Tapatalk
Bfitz26 said:
Does it also say no device found?
Sent from my SCH-I545 using Tapatalk
Click to expand...
Click to collapse
No it freze on this
rm failed for /sdcard/install-recovery.sh, No such file or directory
when i disconnect the pone say not found for 4 or 5 times and finish
---------- Post added at 08:49 PM ---------- Previous post was at 08:28 PM ----------
I tri 3 times
try to wipe all data.
Next try is to reinstall last firmware update whit odin or it trip my knox 0x0 to 0x1 ?
MexyHKR said:
It say to me
rm failed for /sdcard/install-recovery.sh, No such file or directory
And now ? xD
Click to expand...
Click to collapse
Thats not a big deal. Basically, I removed the /sdcard/install-recovery.sh from the script earlier and forgot to not try and delete a file that doesnt exist... Ill fix that! haha That doesnt hurt anything at all. Sowwy!
Ok now im freeze on Cleaning Up Files....
Your link is down
Tomsgt said:
Your link is down
Click to expand...
Click to collapse
The link has 2 hh's in the http
eklipz3 said:
The link has 2 hh's in the http
Click to expand...
Click to collapse
thanks did notice that
Finaly dont work on my GS4
PDA: I9505XXUEMJ7
MODEM: I9505XXUEMJ7
CSC: I9505ITVEMJ8
Try 2 times after full wipe and emergency firmware restore.
Freeze on Cleaning etc...
Now need to go sleep 1:06AM in italy
Good night and sorry for bad speak
I speak like a fish trying to speak Russian

Categories

Resources