Hi All,
I have A13 allwinner 7" tablet installed and working perfectly android 4.0.4. Have plenty of question which i write below. Thanks for answer in advance.
1) Is it worth to update 4.0.4 to 4.1 or 4.2? Means is A13 processor is sufficient to work? 4.0.4 works perfectly.
2) I am unable to boot in recovery mode with combination of power key and volume key.. Which other way it can work?
3) Any CyanogenMod 10 (jellybean) working perfectly with allwinner A13?
Will keep asking question in further and disturb you..
I have to post a new thread because I could not find any answer of my particular questing in whole xda family.
I 've got the same chinese tablet.
Unfortunately there isn't any custom working ROM.
I found some but it reported that touch screen isn't working as expected
Sent from my home using my tablet
pigeonaras said:
I 've got the same chinese tablet.
Unfortunately there isn't any custom working ROM.
I found some but it reported that touch screen isn't working as expected
Sent from my home using my tablet
Click to expand...
Click to collapse
Yes I read some post about touch screen. But there should a way around here. I seen one a10 working jellybean perfectly.
I agree that there will be a solution soon.
A10 and A13 are different CPUS.
Also every chinese tablet has different hardware specifications therefore it's difficult to make a working custom ROM for all of these...
Sent from my home using my tablet
cm9 is available for a13 cpu.just search it
Sent from my GT-I5800 using Tapatalk 2
pratikmore said:
cm9 is available for a13 cpu.just search it
Sent from my GT-I5800 using Tapatalk 2
Click to expand...
Click to collapse
But there is a huge problem of touch screen. After cm9 touch screen is not working.
TWD_MID ROMs
Hello,
It is worth looking on the Tech Know site under Factory firmware download sites.
I can't post the outside link as I have no previous posts.
trustytrev.
I pray to god to bless us an experienced kernel developer
what recovery method would i install to to a nandroid backup so i dare play more?
i have the same
i got a recovery fro this tree
http://forum.xda-developers.com/showthread.php?t=1861445
i installd only the recoveru of his end it works
xnhy said:
i got a recovery fro this tree
http://forum.xda-developers.com/showthread.php?t=1861445
i installd only the recoveru of his end it works
Click to expand...
Click to collapse
Hi,
Mind telling me which tree did you use? I'm not able to see an *.img file in any of those 3 trees, only a recovery folder from the Allwinner tree. Do I need to convert this into an image first?
Sorry been a while since I flashed a recovery image (using command line flash_image) on my Star A1000. I just bought a TWD_MID tablet and got the same problem (no recovery mode, only safe mode). Thanks in advance for the help.
therecis a better recovery at www.techknow.me anywayv in order to install the recovery you need to open a command window into the folder that you put the files in and thin you type " sh file name.sh instad of file name you type the sh that you have
Sent from my ET7-20 using Tapatalk
Hey guys i have a similar tablet its a a13 but its a 9inch
It is bricked, all i have is the stock recovery, and whoever did it, faild to make a backup, so restoring does nothing, i have heard that there is no working rom, so can someone with a similar tablet make a backup of their stock rom and send it to me, or any helpful advice would be great, also this tablet has been a big challenge since it has no name on it or any numbers at all, but i did open it up and wrote down the chipset numbers and a serial number, if it helps ill share it, hope someone can help, thanks
Hi. I have this tablet and can do a backup of stock rom for you.
Related
Hi,
Really need some help with a new 10 inch tablet I purchased. its model no is BC1077 and that's about all it says in the box.
The problem is with the touchscreen as it does not work. i have done a factory reset using a mouse but that did not help, is there anything else I can try like flashing it using my PC?
Thanks for any help
Also It looks like a protab2xxl clone but I don't know how to flash it so instructions would be very much appreciated.
Link for tablet: Type this into Google search as i am unable to post links - " 10" Capacitive Multi Touch Android 4.0 Tablet Pc All Winner A10 universalgadgets "
there are so many roms for allwinner a10 just search it.
Sent from my GT-I5800 using Tapatalk 2
I got the same one from that ebay guy too its strange but id rather have this over any lg but its hard to find any real custom roms and firmwares :,-( but its great as is with ics but would love jb instead
Sent from my BC1077 using XDA Premium App
4yaz-n16 said:
Hi,
Really need some help with a new 10 inch tablet I purchased. its model no is BC1077 and that's about all it says in the box.
The problem is with the touchscreen as it does not work. i have done a factory reset using a mouse but that did not help, is there anything else I can try like flashing it using my PC?
Thanks for any help
Also It looks like a protab2xxl clone but I don't know how to flash it so instructions would be very much appreciated.
Link for tablet: Type this into Google search as i am unable to post links - " 10" Capacitive Multi Touch Android 4.0 Tablet Pc All Winner A10 universalgadgets "
Click to expand...
Click to collapse
I also have this tablet. Touchscreen is working, but G-sensor is not. My firmware is "crane_bc1077-eng 4.0.4 IMM76D 20121030 test-keys", what is yours?
Can you, please, make full backup of you tablet using recovery menu? Also you can knew exact system info about your tablet by using specdevice.com.
ive not got the firmware but theres another page on here that has some similar firmware but no one can find the official firmware atm i have the n500 firmware on that page its ok but no rotation on mine will see if i can post a link (not sure how on my phone but will try it for you)
try [Q] Allwinner A10 in the search box
Sent from my GT-S7500 using XDA Premium App
Hello all!
So after much careful consideration I've decided to post this thread.
This thread is for all those people with the Goophone that isn't like the others. The ugly duckling - so to speak.
I purchased a goophone i5 from "efit" from dhgate.com after watching mayianjay's Youtube videos.
http://www.dhgate.com/goophone-i5-m...oid-4/p-ff8080813a071f7b013a594a682b5965.html
Unfortunately the phone WASN'T the same as mayianjay's and NONE of his rom's work with this particular model, even further I couldn't find a CWM or TWRP recovery.img anywhere on the internet that was compatible with this phone, so I thought I'd help out my new friends of XDA and provide you guys with as much information as possible.
The phone model information is as follows (according to Android System Info.apk).
Android Version: 4.2.1
CPU: MT6575
CPU Hardware: MT6577
CPU HardwareP1: MT6575
Resolution: 480 x 854
DPI: 240
Brand: MZ
Device: E939
Model:iphone 5
Now, if this is what your phone looks like then I have good news for you - as you are almost certainly wondering where to find a recovery.img - See the attachment below. You will need flash tools which you can downloaded here : http://forum.xda-developers.com/private.php?do=showpm&pmid=10599596, alternatively you can try using MobileUncle. For this particular model you just have to have the phone off before commencing the flash with flash tools.
The recovery image provided comes with TWRP and if it STILL doesn't work for you then your only other option is building your own - which can be found reading my dear friend yuweng's post here. http://forum.xda-developers.com/showthread.php?t=1825722&page=1 - There are alot of tutorials on his post and you can learn much on your endeavor to flashing your phone :victory:
Currently I have been unsuccessful installing any roms as I get "assert failed:write_raw_image("/tmp/boot.img")" when trying to install any ROM, which tells me that there are no supported ROMs for this device yet.
ROM's I've tried..
None from Colonelzap's blog work for this model
mayianjay'
XDA-Goophone i5 Lite ROM with the 3g fix also doesn't install.
But fear not. I'll make my own rom fixes if I have too! If you need help with your Goophone I'm happy to assist. Although I haven't gotten quiet there yet I do believe I'm a stone ahead of many others. Also - I have a question to anyone out here who has fixed the 3g connection on the phone, How'd you do it?!
I will try
CrispHotdog said:
Hello all!
So after much careful consideration I've decided to post this thread.
This thread is for all those people with the Goophone that isn't like the others. The ugly duckling - so to speak.
I purchased a goophone i5 from "efit" from dhgate.com after watching mayianjay's Youtube videos.
http://www.dhgate.com/goophone-i5-m...oid-4/p-ff8080813a071f7b013a594a682b5965.html
Unfortunately the phone WASN'T the same as mayianjay's and NONE of his rom's work with this particular model, even further I couldn't find a CWM or TWRP recovery.img anywhere on the internet that was compatible with this phone, so I thought I'd help out my new friends of XDA and provide you guys with as much information as possible.
The phone model information is as follows (according to Android System Info.apk).
Android Version: 4.2.1
CPU: MT6575
CPU Hardware: MT6577
CPU HardwareP1: MT6575
Resolution: 480 x 854
DPI: 240
Brand: MZ
Device: E939
Model:iphone 5
Now, if this is what your phone looks like then I have good news for you - as you are almost certainly wondering where to find a recovery.img - See the attachment below. You will need flash tools which you can downloaded here : http://forum.xda-developers.com/private.php?do=showpm&pmid=10599596, alternatively you can try using MobileUncle. For this particular model you just have to have the phone off before commencing the flash with flash tools.
The recovery image provided comes with TWRP and if it STILL doesn't work for you then your only other option is building your own - which can be found reading my dear friend yuweng's post here. http://forum.xda-developers.com/showthread.php?t=1825722&page=1 - There are alot of tutorials on his post and you can learn much on your endeavor to flashing your phone :victory:
Currently I have been unsuccessful installing any roms as I get "assert failed:write_raw_image("/tmp/boot.img")" when trying to install any ROM, which tells me that there are no supported ROMs for this device yet.
ROM's I've tried..
None from Colonelzap's blog work for this model
mayianjay'
XDA-Goophone i5 Lite ROM with the 3g fix also doesn't install.
But fear not. I'll make my own rom fixes if I have too! If you need help with your Goophone I'm happy to assist. Although I haven't gotten quiet there yet I do believe I'm a stone ahead of many others. Also - I have a question to anyone out here who has fixed the 3g connection on the phone, How'd you do it?!
Click to expand...
Click to collapse
I have the same phone too!
Thanks guy for the hard work.
I'm having no problem with my 3G connection out of the box.
But the GPS is not functioning at all.
All you need to do is edit the updater-script and remove those assert lines. That won't overwrite boot.img (which contains the kernel) but it'll allow the ROM to finish its install and you can make a try to see if it works or not. Maybe there's another way to flash boot.img...
NorthWind89 said:
I have the same phone too!
Thanks guy for the hard work.
I'm having no problem with my 3G connection out of the box.
But the GPS is not functioning at all.
Click to expand...
Click to collapse
Ah I see, I did hear there was a few GPS bugs but they can be fixed apparently, see that Goophone i5 lite rom thread I think this phone has the wrong 3G cell bands for my area (Australia VIC), Even though it says it supports it on the site.. :/ Looks like I'm doomed with the 3G Bug, I've tried copying the APN settings from one phone to another and all. Anyway no problem!
CrispHotdog said:
Ah I see, I did hear there was a few GPS bugs but they can be fixed apparently, see that Goophone i5 lite rom thread I think this phone has the wrong 3G cell bands for my area (Australia VIC), Even though it says it supports it on the site.. :/ Looks like I'm doomed with the 3G Bug, I've tried copying the APN settings from one phone to another and all. Anyway no problem!
Click to expand...
Click to collapse
I also have this phone. (Goophone i5 which is MZ E939 model) and my 3G is stuck as well. I did the same thing you did friend - copy the APN's from my samsung galaxy which works perfeclty with 3G and APN's setting. When APN's appeared in goophone menu I was able to listed my GSM providers and I could choose this one I have SIM card inside. Neverthless during the connection I recieve "Unable to connect, try again later"
I did some tests using different apps and all shows that 3G 900mhz is working and is ON. But no success in connecting. It is really annoying when you have your smartfon offline - almost useless
I have the same problem with custom ROMs too. No way to install them - using ROM manager or SP flash tool. - always some error appears.
I tried to install the ROM then it say cannot find path to emmc something like that...
stock apk
hi, i have recently rooted this phone and i dumbfoundedly deleted the important apk's that includes the UI and home launcher etc
by any chance anyone may help me copy all the stock apk's and compile them into a zip/rar file for me? =[ would be much apreciated as i am unable to use recovery and updates also.:crying:
taion0704 said:
hi, i have recently rooted this phone and i dumbfoundedly deleted the important apk's that includes the UI and home launcher etc
by any chance anyone may help me copy all the stock apk's and compile them into a zip/rar file for me? =[ would be much apreciated as i am unable to use recovery and updates also.:crying:
Click to expand...
Click to collapse
Just reset to factory setting and it will come back...
I done that many times already...
I have the same phone too
I have the same one from efit, I replaced all apps in system/app by google apps by the following
GoogleCalendarSyncAdapter.apk
GoogleContactsSyncAdapter.apk
GooglePartnerSetup.apk
GoogleServicesFramework.apk
rootexplorer.apk
Vending.apk
DOWNLOAD IT HERE: http://www.mediafire.com/?2o838cef8feakno
PS. I rooted the phone before replacing that, using MTKdroidtool
Now I see my phone is slower and the playstore opens but gives me an error when It installs some app (error code 110) which fails eventually.
IF some one can please give me the stock apps in system/app for this phone, I would appreciate.
---------- Post added at 09:17 PM ---------- Previous post was at 08:55 PM ----------
taion0704 said:
hi, i have recently rooted this phone and i dumbfoundedly deleted the important apk's that includes the UI and home launcher etc
by any chance anyone may help me copy all the stock apk's and compile them into a zip/rar file for me? =[ would be much apreciated as i am unable to use recovery and updates also.:crying:
Click to expand...
Click to collapse
I did the same mistake, someone please help me.
Ok after a bit of research it turns out, efit has given incorrect information about the phone, the phone isn't goophone, its thunderbird i5
Whoever has the stock rom on thunderbird i5 , just follow the guidelines from the link below
http://d-h.st/d8a
Also share with us, thanks
brick
Hey guys,
I wiped my system and now my phone stay in the booting image of the apple logo and I can't do anything...
Please help...
NorthWind89 said:
Hey guys,
I wiped my system and now my phone stay in the booting image of the apple logo and I can't do anything...
Please help...
Click to expand...
Click to collapse
Same here, However I'm able to go to recovery menu, I'm using CWM.
Download MtkDroidTools
http://forum.xda-developers.com/attachment.php?attachmentid=1591452&d=1356460323
See image below, that's how you'll go to recovery mode, but we need a ROM to flash
atleast you won't stay on the apply logo
yaneeck said:
I also have this phone. (Goophone i5 which is MZ E939 model)
Click to expand...
Click to collapse
Maybe you can help us, if you've the stock rom
zaryan said:
Same here, However I'm able to go to recovery menu, I'm using CWM.
Download MtkDroidTools
http://forum.xda-developers.com/attachment.php?attachmentid=1591452&d=1356460323
See image below, that's how you'll go to recovery mode, but we need a ROM to flash
atleast you won't stay on the apply logo
Click to expand...
Click to collapse
I got into the recovery mode of TWRP but nothing I can do...
And even funny is that my phone can't detect the SD card...
So even with a ROM also I don't know how to flash it...
CrispHotdog said:
None from Colonelzap's blog work for this model
mayianjay'
XDA-Goophone i5 Lite ROM with the 3g fix also doesn't install.
But fear not. I'll make my own rom fixes if I have too! If you need help with your Goophone I'm happy to assist. Although I haven't gotten quiet there yet I do believe I'm a stone ahead of many others. Also - I have a question to anyone out here who has fixed the 3g connection on the phone, How'd you do it?!
Click to expand...
Click to collapse
I guess we can only use a rom that matches our hardware
http://forum.xda-developers.com/showpost.php?p=36326293&postcount=180
Anxiously waiting for something, ready to donate as well
Anybody who blocked phone on apple logo or install wrong ROM or anything please try this solution:
wait till phones battery is fully uncharged then plug the phone to charger wait some minutes and press VOL - (minus) together with power button
After few seconds some menu will appears (more or less RECOVERY look like)
Choose CLEAR FLASH option using "MENU" button...
Phone should starts with factory menu and settings.
I did it about ten times and works perfectly in my goophone e939 or whatever it is...
@Yaneeck
Can you please do a favor and get us the following from your working E939
PRELOADER.bin
DSP_BL
UBOOT.img
BOOT.img
RECOVERY.img
SEC_RD
LOGO
ANDROID
CACHE
USRDATA
Thanks a ton, I promise will pay you for this
Thunderbird i5
Helle,i need the complete rom for this phone for flash tool,can you help me?
Please write simple english,because my engl. is not so good,
i bougth it from cect shop.
With flash tool hope i can flash it,my backup is without system.img,datta.img and another files.
PRELOADER.bin
DSP_BL
UBOOT.img
BOOT.img
RECOVERY.img
SEC_RD
LOGO
ANDROID
CACHE
USRDATA
Thank you
giuido said:
Helle,i need the complete rom for this phone for flash tool,can you help me? ~
Thank you
Click to expand...
Click to collapse
Please upload all the files you got from backup at www.filedropper.com
and share the link with us.
I will PM you for more help
Hi There! I Have An Allwinner A33 SoC Tablet, Named Onda V702 And Its Quad Core With Android 4.4.2.I Managed To Get This Device Rooted By VROOT,But Cant Able To Find A Suitable CWM For This Device.I Have Bricked My Devices Many Times For This Things.But Everytime I Survive Because Of Phoenix Bios Utility And The Stock Firmware.So My Ques Is Is There Any Member Who Is Running CWM Successfully On A33 Or The Same Device?Will Be Very Helpful If Someone Can Help!
Thanks!!!
Bro i've bricked my v702 quad core tab...can you help me to tell how i can fix it... thanks in advance
Dont Worry!!! Unbricking This Tab Is Not A Difficult Task!!!
At First Google : 'Onda V702Quad Core 4.4.2 ChineseGadget' And Then Download The Firmware From That Blog.....I Am Unable To Post Out Link Because Of XDA Rules!!! Then You Will Have To Google And Download: Phoenix Bios Flasher 1.0.6 Because it Is Mandatory For Bricked Devices!!!
Flasher,Firmware,Root TUT,CWM Are Not Easily Available For These Devices.I Will Gradually Upload All Stuff For This Tab In My Google Drive And Share For Public When I Gathered All.
The Phoenix BIOS Flasher Worked Well In My Win 8 After Restarting It In Disabled 3rd Party Signature Check......But If You Run Win 7 Or XP Or Linux Or Mac,Then It Should Work Fine! But Use This At Your Own Risk And Dont Responsible Me For Any Mess You Done Though You Already Bricked It!
Thanks!!!
Hi there,
Ive got the same tablet and i stuffed mine with rooting and deleting accidentally the systemui.apk, reuploading one that isnt compatible and now its showing "android.keyguard stopped" so i cant access anything. If i could turn on usb debug i could access the file system via a pc, but that is not possible. Id like to go into recovery mode, but all versions of power + volume button do not work. Have you got any idea on how those tablets go into recovery mode? Or any other idea on how to fix this up? Its so simple by just removing one file that i put into the priv-apps folser :-/
Any help would be appreciated.
thanks a lot
mediajewel said:
At First Google : 'Onda V702Quad Core 4.4.2 ChineseGadget' And Then Download The Firmware From That Blog.....I Am Unable To Post Out Link Because Of XDA Rules!!! Then You Will Have To Google And Download: Phoenix Bios Flasher 1.0.6 Because it Is Mandatory For Bricked Devices!!!
Flasher,Firmware,Root TUT,CWM Are Not Easily Available For These Devices.I Will Gradually Upload All Stuff For This Tab In My Google Drive And Share For Public When I Gathered All.
The Phoenix BIOS Flasher Worked Well In My Win 8 After Restarting It In Disabled 3rd Party Signature Check......But If You Run Win 7 Or XP Or Linux Or Mac,Then It Should Work Fine! But Use This At Your Own Risk And Dont Responsible Me For Any Mess You Done Though You Already Bricked It!
Thanks!!!
Click to expand...
Click to collapse
yakuzax6 said:
Hi there,
Ive got the same tablet and i stuffed mine with rooting and deleting accidentally the systemui.apk, reuploading one that isnt compatible and now its showing "android.keyguard stopped" so i cant access anything. If i could turn on usb debug i could access the file system via a pc, but that is not possible. Id like to go into recovery mode, but all versions of power + volume button do not work. Have you got any idea on how those tablets go into recovery mode? Or any other idea on how to fix this up? Its so simple by just removing one file that i put into the priv-apps folser :-/
Any help would be appreciated.
Click to expand...
Click to collapse
1st of all,i can help you by uploading my systemui.apk and com.keyguard.apk.......then its up to you how you will pass this files like by ADB or from a 3rd party file manager.
2nd,I am also having issue on going to recovery mode.thats why i now use xposed module to reboot into recovery......but i think pressing vol+ and power button together for minimum 10 sec successfully lead our tab into recovery.all the chemistry is hidden under the switch pressing method.......some said to 1st press the power button,when the display lights up,then keep pressing the vol+ button until the recovery appears! but it didnt work for me! the method which work for me is pressing both keys together assuring the tab is fully turned off....but its not always successfull!!!So Try Yourself!!! And If Anyone CAn Compile A Recovery And Test it successfully Then Please Share With Us!!
Hellppp
mediajewel said:
At First Google : 'Onda V702Quad Core 4.4.2 ChineseGadget' And Then Download The Firmware From That Blog.....I Am Unable To Post Out Link Because Of XDA Rules!!! Then You Will Have To Google And Download: Phoenix Bios Flasher 1.0.6 Because it Is Mandatory For Bricked Devices!!!
Flasher,Firmware,Root TUT,CWM Are Not Easily Available For These Devices.I Will Gradually Upload All Stuff For This Tab In My Google Drive And Share For Public When I Gathered All.
The Phoenix BIOS Flasher Worked Well In My Win 8 After Restarting It In Disabled 3rd Party Signature Check......But If You Run Win 7 Or XP Or Linux Or Mac,Then It Should Work Fine! But Use This At Your Own Risk And Dont Responsible Me For Any Mess You Done Though You Already Bricked It!
Thanks!!!
Click to expand...
Click to collapse
hi, i have a irulu tablet a33 android 4.4.2, trying to root it, the tablet reboot its self and stay in irulu logo, recovery doest work and i only can turn it on and off, how i can solve this??? plz help me
This Should Help You
At First Make Sure That Your Recovery Options Work...If Not Then Download Its Firmware With Phoenix Flasher Utility Then Flash The Firmware With The Software...This Should Boot The Tab But You Will Lose All Your Data,So Do This At Your Own Risk....
By The Way ,What Method Do You Used For Rooting?
Arellano33 said:
hi, i have a irulu tablet a33 android 4.4.2, trying to root it, the tablet reboot its self and stay in irulu logo, recovery doest work and i only can turn it on and off, how i can solve this??? plz help me
Click to expand...
Click to collapse
I have the Tagital Version
mediajewel said:
At First Make Sure That Your Recovery Options Work...If Not Then Download Its Firmware With Phoenix Flasher Utility Then Flash The Firmware With The Software...This Should Boot The Tab But You Will Lose All Your Data,So Do This At Your Own Risk....
By The Way ,What Method Do You Used For Rooting?
Click to expand...
Click to collapse
I have the Tagital T10 which has the A33 Quad core Mali-400MP but it is bricked! I can't get past the Tagital screen to get into recovery mode.. I keep trying different combos of key press etc. I'm having issues find the specific Phoenix Bios Flasher recommended above I see a 1.0.56 would this work? Also do you think the Onda V702Quad Core 4.4.2 firmware would work for this tablet too.. it's all chinese ware.. I have an email into the seller from Amazon (where I bought it) to see if I can get the stock firmware / rom but not sure how well that will work out for me. Any help is appriciated.. My boyfriend is libel to kill me for bricking this thing, he just got it for me a week ago LOL
1st Of All,The Phoenix BIOS Flasher Is Used To Flash The Allwinner Soc's Devices & Any Version Should Work Perfectly But Go With The Latest One ...So You Will Have to Use That To unbrick Your One! But Though Its All The Same Chinese Things,You Shouldnt Flash Onda V702 Firmware On Your One,Because Onda Is A Well Known Tablet PC Manufacturer Around The World,So Its Simple They Can Use Different Mount Point,If They Do,Then Your Device Will Surely Not Boot Anyway....So You Should Better The Firmware Of Your Specific Model.....Search Google For That...Hope U Get Your Answer !
kalerina said:
I have the Tagital T10 which has the A33 Quad core Mali-400MP
Click to expand...
Click to collapse
My Onda v702 stuck in bootscreen
mediajewel said:
1st Of All,The Phoenix BIOS Flasher Is Used To Flash The Allwinner Soc's Devices & Any Version Should Work Perfectly But Go With The Latest One ...So You Will Have to Use That To unbrick Your One! But Though Its All The Same Chinese Things,You Shouldnt Flash Onda V702 Firmware On Your One,Because Onda Is A Well Known Tablet PC Manufacturer Around The World,So Its Simple They Can Use Different Mount Point,If They Do,Then Your Device Will Surely Not Boot Anyway....So You Should Better The Firmware Of Your Specific Model.....Search Google For That...Hope U Get Your Answer !
Click to expand...
Click to collapse
Hello brother,
My onda v702 was running fine till couple of days ago then when I tried to turn the tab next morning it is stuck in the boot screen with onda logo flashing. Please let me know how can I fix this.
Thanks
Hi im using a33 tab with VFPv4 neon cpu model. ... Rooting this is quite possible using kingroot app or vroot on pc. Just download it on google. Also cwm recovery image is not yet tested, but im sure someone will make it. ....
Please re-post to everyone that needs it
http://androidmtk.com/download-phoenixsuit
https://cloud.mail.ru/public/e4a01c0091ae/Allwinner A33/
Chiseled brail into stone translated via N5
i2andog said:
Please re-post to everyone that needs it
http://androidmtk.com/download-phoenixsuit
https://cloud.mail.ru/public/e4a01c0091ae/Allwinner A33/
Chiseled brail into stone translated via N5
Click to expand...
Click to collapse
What is it?
Sent from my S710 using XDA Free mobile app
What is what?
Chiseled brail into stone translated via N5
i2andog said:
What is what?
Chiseled brail into stone translated via N5
Click to expand...
Click to collapse
I mean, is how can we make custom recovery for A33 ? Is ot universal? Also the A33 twrp file, had u already tried to flash custom recovery on ur own device?
Sent from my S710 using XDA Free mobile app
No I actually posted in the wrong forum... I apologize. For a month I was looking for an image file to flash onto my daughters cheap iRulu x7 tablet. When I finally found one (late night) I tried to post the links everywhere I could so people would not have the trouble I did in finding the resources. I meant to delete the ones that did not apply. I actually made a link to my drive that is working a lot better. You know what I have a link to an a33 twrp recovery. I'll pm you because I'm not sure that the IMG is good and I don't want to spread foul $hit and make ppls life harder.
Chiseled brail into stone translated via N5
i2andog said:
No I actually posted in the wrong forum... I apologize. For a month I was looking for an image file to flash onto my daughters cheap iRulu x7 tablet. When I finally found one (late night) I tried to post the links everywhere I could so people would not have the trouble I did in finding the resources. I meant to delete the ones that did not apply. I actually made a link to my drive that is working a lot better. You know what I have a link to an a33 twrp recovery. I'll pm you because I'm not sure that the IMG is good and I don't want to spread foul $hit and make ppls life harder.
Chiseled brail into stone translated via N5
Click to expand...
Click to collapse
Just tell me how to backup firmware.img . adb terminal app doesn't work when dumping ROM on my tab ( ill try it in PC when I have some time) ,also the Rashr app that I saw on your cloud storage (russian translation) doesn't work on My cheap tab (A33) (neither the flashify app works). ...
BTW, i saw a YouTube tutorial when creating twrp on A33 but it was translated on Russian and it needs a stock firmware IMG..
Sent from my S710 using XDA Free mobile app
Lol.. You have a funny way of asking for a favor.
Sent from my Nexus 5 using Tapatalk
Help
i bricked my a33 tablet, i have a bootloop and cant go in to the recovery, when i plug the tablet in to the pc nothing happens help me i bought the tablet today
Good day!
I wounder if anybody can help me here...
Few weeks ago I got a 9.7 inch tablet what is looks like E-ceros revolution tablet but not real one... (China copy without any description on the back lid).
It was very laggy so I decided to write tweaked rooted firmware for E-ceros revolution tablet. All specs where the same:
RK3188 CPU 1,6GHZ; Mali 400 GPU; 9.7 inch... All details(book photos and other) attached...
After I flashed the firmware("Ceros Revolution CT9716 Android 4.4.2 KitKat custom root firmware" or after failure the Q9white_update_FT5406_20130806.img) using RKAndoidtool 1.7. I figured out that forgot to make the backup of entire device, when tablet rebooted I see black screen(with back light) and computer show as usb device connected... But no image on screen...
Complete disaster it is a new tablet, never used and bricked...
I found that after firmware flash using adb shell I get root mode but not for long(for about 2 min., later tablet getting disconnected by it self) and after reboot no more root mode... Need reflash again...
In root mode I succeeded to get some logs(adb dmesg) and data about the tablet. (see .txt file attached)
Can anyone help me in such situation? I can donate some money if succeeded...
P.S: To make sure that it is rk3188 device I opened tablet and checked the chip on board...
septera said:
Good day!
I wounder if anybody can help me here...
Few weeks ago I got a 9.7 inch tablet what is looks like E-ceros revolution tablet but not real one... (China copy without any description on the back lid).
It was very laggy so I decided to write tweaked rooted firmware for E-ceros revolution tablet. All specs where the same:
RK3188 CPU 1,6GHZ; Mali 400 GPU; 9.7 inch... All details(book photos and other) attached...
After I flashed the firmware("Ceros Revolution CT9716 Android 4.4.2 KitKat custom root firmware" or after failure the Q9white_update_FT5406_20130806.img) using RKAndoidtool 1.7. I figured out that forgot to make the backup of entire device, when tablet rebooted I see black screen(with back light) and computer show as usb device connected... But no image on screen...
Complete disaster it is a new tablet, never used and bricked...
I found that after firmware flash using adb shell I get root mode but not for long(for about 2 min., later tablet getting disconnected by it self) and after reboot no more root mode... Need reflash again...
In root mode I succeeded to get some logs(adb dmesg) and data about the tablet. (see .txt file attached)
Can anyone help me in such situation? I can donate some money if succeeded...
P.S: To make sure that it is rk3188 device I opened tablet and checked the chip on board...
Click to expand...
Click to collapse
Hi,
I have a firmware for a tablet like yours (i dont know if its a Revolution clone - Memup Elite 9716). Maybe you will be able to try the firmware at least.
I can't upload it now, but I'll probably tomorrow.
bernardstef said:
Hi,
I have a firmware for a tablet like yours (i dont know if its a Revolution clone - Memup Elite 9716). Maybe you will be able to try the firmware at least.
I can't upload it now, but I'll probably tomorrow.
Click to expand...
Click to collapse
I'll be very thankful and can donate some money if it fits... Already tried about 7 different kernels and firmwares from similar tablets... No luck.... May be yours one works...
Will be waiting for the answer....
septera said:
I'll be very thankful and can donate some money if it fits... Already tried about 7 different kernels and firmwares from similar tablets... No luck.... May be yours one works...
Will be waiting for the answer....
Click to expand...
Click to collapse
Dull ! I forgot about this post I made ... Sorry
My tablet is a Memup brand:
http://www.cdiscount.com/informatiq...9716-quad-core/f-10798010212-spelite9716.html
I flashed a "OMA" ROM on it (4.4.2 I think), and I have the original rom at home and I guess I can (slowly!) upload it on a server.
Is it the same as yours ? - no money needed, lol . But if I can help you recover this tablet it would be great.
Maybe you could try this ROM, the one I flashed:
https://www.dealabs.com/url/?e=AGfyxEyWcavcqyVJeRhZp7d5F8Z0KrLcgoS1mbga6vPZ1aLCP38R53nhHk/SlqhM
A procedure is included in English, in this file. I followed those and it's working.
I think that your tablet isn't bricked, as it's detected by your computer.
Some steps requires bootloader mode : https://download.chinavasion.com/download/Others/ceros_rev_firmware_install_9470.pdf
bernardstef said:
Dull ! I forgot about this post I made ... Sorry
My tablet is a Memup brand:
I flashed a "OMA" ROM on it (4.4.2 I think), and I have the original rom at home and I guess I can (slowly!) upload it on a server.
Is it the same as yours ? - no money needed, lol . But if I can help you recover this tablet it would be great.
Maybe you could try this ROM, the one I flashed:
A procedure is included in English, in this file. I followed those and it's working.
I think that your tablet isn't bricked, as it's detected by your computer.
Some steps requires bootloader mode :
Click to expand...
Click to collapse
Thank you. Had no time to write earlier... Sorry... , But problem already solved i n here:
arctablet.com/blog/forum/firmware-flashing-on-rockchip-based-devices/e-ceros-revolution-clone-rk3188-need-working-firmware/page-2/
Got the original firmware from seller and Oma helped me with custom build.
Anyway thank you for the trying to help me
septera said:
Thank you. Had no time to write earlier... Sorry... , But problem already solved i n here:
arctablet.com/blog/forum/firmware-flashing-on-rockchip-based-devices/e-ceros-revolution-clone-rk3188-need-working-firmware/page-2/
Got the original firmware from seller and Oma helped me with custom build.
Anyway thank you for the trying to help me
Click to expand...
Click to collapse
Nice !
This tablet is great with 4.4.2 on it
Cheers !
Hello everyone. Two months ago I purchased a tablet from Wal-Mart the name on the box was TG-TEK model of tablet "according to the box" is TGH1051-blk the same day i decided to root it, not really knowing what I was doing long story short i ended up on a boot loop that being said yes i am a newbee! The two months ive had the tablet I've been trying to fix it. I have learned alot in the two months so im not totally ignorant when it comes to some processes any more. I have flashed more roms/firmwares than i can count using various flashing methods. I have found my self at a dead end hopefully some one can point me in the right direction any help would be greatly appreciated the information on the mother board go's as follows (i apologize if it's not in the right order just writing what I see there)again thanks for any help that can be given!
EFERCRO
M102_MBV1.4
A33
G3054BA 63R1
AXP223
G1162BC 6391
RTL8723BS
G3M86H1 GG1500
SKhynix
H5TQ4G83AFR
D/G. 603A
NWLE4025XHI
Silead
GSL3676
C2B0E6H272N
SKhynix
H26M52103FMR
e-NAND. 344A
M18LR969RD
10.1IN Screen tablet is currently flashed with. A33_U102_U1021C
201401013
Touchscreen, Bluetooth, WiFi not working! Please Help if able Thanks again
Ricktick said:
Hello everyone. Two months ago I purchased a tablet from Wal-Mart the name on the box was TG-TEK model of tablet "according to the box" is TGH1051-blk the same day i decided to root it, not really knowing what I was doing long story short i ended up on a boot loop that being said yes i am a newbee! The two months ive had the tablet I've been trying to fix it. I have learned alot in the two months so im not totally ignorant when it comes to some processes any more. I have flashed more roms/firmwares than i can count using various flashing methods. I have found my self at a dead end hopefully some one can point me in the right direction any help would be greatly appreciated the information on the mother board go's as follows (i apologize if it's not in the right order just writing what I see there)again thanks for any help that can be given!
EFERCRO
M102_MBV1.4
A33
G3054BA 63R1
AXP223
G1162BC 6391
RTL8723BS
G3M86H1 GG1500
SKhynix
H5TQ4G83AFR
D/G. 603A
NWLE4025XHI
Silead
GSL3676
C2B0E6H272N
SKhynix
H26M52103FMR
e-NAND. 344A
M18LR969RD
10.1IN Screen tablet is currently flashed with. A33_U102_U1021C
201401013
Touchscreen, Bluetooth, WiFi not working! Please Help if able Thanks again
Click to expand...
Click to collapse
What I understood is that you want a stable ROM, no? I don't have this device but, if you're a newbie, please use the stock ROM which is most stable. There are a lot of new brands which doesn't have developers' support. Just make sure to always flash the right ROM for your device and you won't get any broken features. Shortly, wipe data and flash stock ROM.
P.S. From my experience: never try to flash a ROM that is made for another device.
thank you
minealex2244 said:
What I understood is that you want a stable ROM, no? I don't have this device but, if you're a newbie, please use the stock ROM which is most stable. There are a lot of new brands which doesn't have developers' support. Just make sure to always flash the right ROM for your device and you won't get any broken features. Shortly, wipe data and flash stock ROM.
P.S. From my experience: never try to flash a ROM that is made for another device.
Click to expand...
Click to collapse
thanks ! but the problem is i cant find a stock rom ! I cant even find out the actual name of the tablet
Ricktick said:
thanks ! but the problem is i cant find a stock rom ! I cant even find out the actual name of the tablet
Click to expand...
Click to collapse
Does it have a Mediatek chipset? Or can you make a photo of the tablet box?
pic
minealex2244 said:
Does it have a Mediatek chipset? Or can you make a photo of the tablet box?
Click to expand...
Click to collapse
like this?
Try A33
G3054BA 63R1
]
minealex2244 said:
Try A33
G3054BA 63R1
Click to expand...
Click to collapse
Am i supposed to search for that ?
Yes
minealex2244 said:
Yes
Click to expand...
Click to collapse
Hi. Did someone figure out where to find the solution for this person? I need a root solution for it as well.
sarasotaguy said:
Hi. Did someone figure out where to find the solution for this person? I need a root solution for it as well.
Click to expand...
Click to collapse
Sorry but I'm not owning this device.
Yeah, I too am trying to root this device ... and I did the search on what you had which produces nothing. Any other help would be appreciated.
Hi, I bricked my A33 Quad Core tablet. I was able to root the tablet by kingo Root app, and then on one Russian site I found twrp for A33 and I tried to flash it with the flashify and my tablet got bricked. Since then I was not able to back on the firmware which came in with the tablet.
I used phoenix suit to flash a rom. I am using a rom which is about as good as original was the only problem is that it does not rotate, Just in one form.
I am looking for the right firmware, if anyone can help or if I can fix this issue by installing some application.
I have attached the picture of my original recovery and the picture of my board.
I accidently found out, if you hold your volume up button and then also press the power button for 10 sec and then leave vol+up and power button simultaneously, your tablet will boot in recovery mode. Works for me.