Please help me friends am frustrated now. Am new in Motorola family. The xt910 I buyed was installed with Chinese firmware 4.04. It was lacking google apps. So I tried to flash new Asian retail firmware with rsd lite 6.1.4 downloaded from sbfdroiddevelopers. Flashing failed in the 6th process and after that my phone was showing flash failure device is locked 0a.74. After that I tried other country sbf file but the same error it fails. Help me please am tired of searching solutions don't know how to get over it.
Related
I flashed intl-fix-try1.sbf by RSD lite. After rebooting, it shows:
SVF:108:1:2
Fail to boot 3
starting RSD mode
What should I do now?
I tried google but cann't find anything .
telstra
you need to flash telstra rom first
i dont have to link as it is 1.5GB in size but heres the file name
OLYEM_U4_1.4.2_SIGNED_USAOLYEMTELSTRA_P029_A020_M005_HWolympus_1g_1FF.sbf
i have the same problem pls help. can't find a working download link of "OLYEM_U4_1.4.2_SIGNED_USAOLYEMTELSTRA_P029_A020_M0 05_HWolympus_1g_1FF.sbf".
Hello to all at the forum,
Can I use the EU retail OTA for the Droid Razr Maxx XT910 on a NonEFIGSRetail.en.EU phone using the following procedure: http://forum.xda-developers.com/showthread.php?t=1849744 I cannot appear to find a suitable procedure like the link posted for my particular model of the Razr Maxx. My phone is currently a brick and I would like to rectify the situation as soon as possible.
Thank you in advance,
Jonathan.
here some hints to insta the 4.1.2 Jelly Beam on the razr
For flash a 4.1.2 you have to use rds lite 6.0
Also you need to install the usb drive otherways your razr will not connect perfectly
Start
Turn off (power botton and vol -)
Let it charge a little bit (half battery will be ok)
enter recovery mode (power vlo- vol+)
go in ap fastboot using vol - and power for confirm
decompress the file (called Rom) you want to flash (in a folder and rename as you like)
launch the rds (remember install mototrala driver)
search the folder where you extract the rom and double click on .xlm file
plug the phone in pc,wait few seconds (10)
click on start
wait
done
some link
rds 6.0 http://forum.xda-developers.com/show...php?p=32900727
Motorola drivers https://motorola-global-portal.custh...81/action/auth
rom to flash http://forum.xda-developers.com/show....php?t=2231289 Retail british work for me
Question
necromundia said:
Hello to all at the forum,
Can I use the EU retail OTA for the Droid Razr Maxx XT910 on a NonEFIGSRetail.en.EU phone using the following procedure: http://forum.xda-developers.com/showthread.php?t=1849744 I cannot appear to find a suitable procedure like the link posted for my particular model of the Razr Maxx. My phone is currently a brick and I would like to rectify the situation as soon as possible.
Thank you in advance,
Jonathan.
Click to expand...
Click to collapse
Hi, How did your phone brick?
Did you try to install the EU retail on NonEFIGSRetail version? If you had taken a backup of the files to your PC, you might find some unbricking solution in the forums.
Hello again,
Thankfully my problem is solved, thank you to everyone at xda developers and for replying to my thread lads. I would be lost without ye. My phone began a process of constantly rebooting after using google maps. I could not id the source of the problem but I attempted to reboot from an xml file on my sd card, however I rooted the phone previous to this and removed an app for DLNA linking, this resulted in the phone refusing to reboot the OS from the xml file and in the process I ended up bricking the phone. It reached the stage where I could only load the AP fastboot screen. To charge the phone I attempted suggestions throughout the phone to charge the phone without an OS however I decided to buy a factory cable and followed the guide that I linked previously.
To confirm, I am in Ireland but my razr maxx was non EU kernel. I now have an EU kernel and the phone is fully functional again. What a relief.
Anyways, peace out.
Jonathan.
I own the Canadian variant of the Motorola Motoluxe XT615, I attempted to flash a baseline Firmware from this Thread:
http://forum.xda-developers.com/showthread.php?t=1943783
IRM-1670-0-4073-A02
I used RSDLite 5.7 and it went through the process of flashing.
At 100% it failed, my phone brought up errors about the failed authentication.
Now when the phone is plugged in, there's a solid red charging light and i cant access flash mode or any other mode
RSDLite 5.7 wont recognize it at all, so i'm pretty sure it's bricked.
I did some research about the xt615 being bricked but i couldn't come up with a resolution.
Is there anyone out there that knows what happened here?
Hi, I have bricked my xoom whilst trying to upgrade (stuck on M logo) I can get to RSD protocol support 3 also Fastboot protocol support, also Android recovery. After hours of reading it seems that I may be able to fix it if I use an SBF file, I've found 1 or 2 but they won't download. Does anyone know where I can get a working one or any other way of fixing it? Thanks in desperation!
Hey bros! sorry for posting it in wrong area but I the vbulletin message denied me to post in razr section*, well ima discuss my prob here ... I rooted my xt910 by batch method , everything went fine reboot was working etc, after that I tried to install CWM recovery from a apk file and it resulted in brick (encryption unsuccessful) due to that reason I tried to wipe cache from recovery and tried to flash boot files from cmd (through pc) this resulted in flash failure boot Loop! i got exhausted and mad! The thing was Rsd wasn't recognizing my razr even the drivers were fine (as cmd was working fine too) but after that I got a new data cable and hola! The rsd worked on windows 8 x64 but fsd gave a error while flashing firmware 6/19"cmt.bin"phone result fail ( or something like that ! Can anyone please help me fix this ****! tried droid razr utility (obviously it was for droid razr but I had no chance unbrinking so I just went ahead and tried my luck out, this resulted in flash failure again and the recovery + bp tools fail! The thing is I need razr utility! or rsd cmt.bin error fix or another software to stock back my Motorola! razr..any help will greatly be appriciate ( nvm 90% of YouTube/XDA/ droid were broken and I couldn't use the exact files to flash which may have resulted in brick, I can charge battery for your info tho