Help with finding best baseband for US T-Mobile - Galaxy S III Q&A, Help & Troubleshooting

Hi guys, I'm new here with the international I9300 and on USA Tmobile network. I have looked for some time now regarding the roaming on GSM and not on WCDMA. My current baseband is XXELL4, yet i get very low signal normally one bar or two bar on WCDMA (w/o roaming). would get full bars on GSM (roaming). I'm wondering if anyone could help me if there's a baseband that works best for tmobile network in the US? Any help would be appreciated! Cheers!

Related

[Q] No 3G network on HD2 using 2.2 Froyo Cyanogen mod 6

Hello,
I recently bought a HTC HD2 and gotten unlocked to work with my ATT sim card also I had someone install the 2.2 Froyo Android software using Cyanogen Mod 6. Since I had the phone I have only been using Edge network and I know for sure we have 3g coverage. How can I get my 3G network to work on my phone? Please help. I am a newb when it comes to cell phones.
Thanks
Matt
someone correct me if i am wrong but the 3g bands for att and t-mo are different so even if you have 3g coverage you would only get edge. For faster speeds youll have to use wifi.
Do you have a Telstra-branded HD2? IIRC, Telstra uses the same 3G bands as AT&T. In that case you should be able to get 3G. Otherwise, the unbranded & T-Mo branded HD2s wouldn't work with AT&T 3G.
Sent from my T-Mobile myTouch 3G Slide using XDA App
jaekidd1012 said:
Do you have a Telstra-branded HD2? IIRC, Telstra uses the same 3G bands as AT&T. In that case you should be able to get 3G. Otherwise, the unbranded & T-Mo branded HD2s wouldn't work with AT&T 3G.
Sent from my T-Mobile myTouch 3G Slide using XDA App
Click to expand...
Click to collapse
I don't know how to check that but this HD2 used by a previous ower having Tmobile. Still having the same problem. Any help is appreciated.
thanks
Thread moved in HD2 Android Development.
but this isn't hd2 android section
No 3G on the TMOus HD2 on ATT
mattp_65 said:
I don't know how to check that but this HD2 used by a previous ower having Tmobile. Still having the same problem. Any help is appreciated.
thanks
Click to expand...
Click to collapse
Unless you have the Telstra HD2 (there will be a T in an oval on the back bottom cover), you won't get 3G on ATT. The Telstra model is the only one with the ATT 3G band (the 850mhz UMTS band).
You will ALSO need to have 850mhz ATT coverage in the areas where you live and travel to get 3G on that model.
Hope this helps...
Hi!
I was wondering if there is a way to change that? Installing a new ROM, a software or something!! I bought the TMo HD2 and brought it to South America. Here we use the 850 MHz frequency for 3G, and I just found out the HD2 works with 3G networks in the 1700 and 2100 MHz frequencies =( Is there a way I can change that ???
technillion said:
Unless you have the Telstra HD2 (there will be a T in an oval on the back bottom cover), you won't get 3G on ATT. The Telstra model is the only one with the ATT 3G band (the 850mhz UMTS band).
You will ALSO need to have 850mhz ATT coverage in the areas where you live and travel to get 3G on that model.
Hope this helps...
Click to expand...
Click to collapse
I checked and there is no T on my phone or cover. But I have cyanogen Mod 6, I was wondering if anyone else has this problem.
thanks

Network realted question. Please help!

Howzit guys,
I brought a HTC Aria in the USA on AT&T network. I came back to SA and rooted my phone put Android v2.2 on (phone came with v2.1) thinking that would unlock the phone, but it didn't. I ended up looking on the net for a website that I could get an unlock code for my phone. Long story short, I found one, paid for it and it worked. I'm using the phone on Vodacom no matter what I do I can't get 3G or HSDPA to work, only GPRS. HSDPA and 3G work fine in the states.
After doing some research I noticed that in the Mobile Network settings on the phone there is 3 options under Network Mode:
1. WCDMA only
2. GSM only
3.GSM / WCDMA auto
Now from what I've seen I need to use WCDMA to get the 3G / HSDPA to work, but when I select option 1. I don't get any signal and then phone eventually switches to GSM automatically. I was at work on the weekend helping a customer with her laptop and she had a 8•ta 3G modem, and 8•ta 3G modems are currently running off of MTN's network I was told this by an 8•ta technician and I noticed when connecting the modem it said something regarding WCDMA.
So now my question, if I change to MTN do you think I will be able to use 3G / HSDPA on my phone?
Any info regarding this will be greatly appreciated.
Thanks
The American version of the Aria uses different 3G frequencies (because that's what AT&T uses), so unfortunately your phone will not work with 3G in South Africa. There is a different version of the Aria (called Gratia in most regions) that is the exact same phone except it supports the correct 3G frequencies for your country, but there's nothing you can do with the phone you have now to make it work.

Help needed - Evo 3D Gsm 3g network

Hi everybody
I recently retired my old Xperia X1 and bought a Htc EVO 3D Gsm.
The cellphone is Canadian Rogers version. and also its unlocked (sim free)
I live in Brazil, I can make calls normally but the 3g network don´t work at all.
This cellphone is quadriband correct ? so its suppose to work with any carrier right ?
Any ideas ? Please help
If need more info just let me know
Just in case, I use TIM as carrier and the 3g frequency here is 2100mhz so I discard band problem
Tks =)
Ok, I think I found the problem
There´s no APN settings
But.. i enter manually the settings for my carrier. It appears "saved" but the settings still blank
Any advices?

[Q] Changing cdma to work in my country

pls i have bought a photon 4g and im loving it on 3g. my problem is that i want to use it on a local expresso network in Ghana which is CDMA. Can anyone help me.

Best setup for UK ONE on AT&T

So I love my HTC ONE.... Fantastic phone.. No question about it.
As I posted else where I have the UK model and I am on AT&T in the USA. It's working, but the HSDPA and 3G is bouncing around quite a bit and it jumps to E really quickly. And it loses the signal quickly in low signal areas. More than any other phone. If I switch the network to GSM, I have full signal almost everywhere.... But no data bandwidth.
It was suggested that I might need to look at my setup.
So here is what I have.
I have a STD LTE data plan
I have a STD sim that work on all my other LTE enabled phones
My APN is Called Phone and has the same setting as I find on the forum for a 4G setup...ie it is NOT the wap and cingular setup.
I have selected WCDMA and GSM networks (I know the phone is not compatible with AT&T LTE bands), but it acted the same way even when it was on the default GSM WCDMA and LTE Auto setting.
Does anyone know else I should check or change?
PS. I will likely buy the developer model, or the AT&T model as soon as it is available... this phone is that good!!!
Thanks for your help.
Nick
PS. I will be in Korea next week, so I am curious how the LTE will function there.... I will let you know. I think they have the 2600 band on one provider and that overlaps with the UK bands

Categories

Resources