Hello all,
I have tried many things before asking for help, but nothing worked so far.
Here is the story:
I was on ICS 4.0.4, with default ROM coming from carrier.
I wanted to install CM9.1,
spent countless hours doing all backup and reading tutorial.
Tried finally yesterday and it was stuck doing "wiping data". Left it for 20min+ and nothing.
After restarting it, it is now stuck on the boot logo.
I couldn't enter anymore CWM or stock recovery (up+home+power), but could enter Download mode.
So I tried a couple of things I have read on the forum, like installing Siyah-s2-v5.0.1.tar through Odin 3.04 but I still cannot enter recovery mode.
I've read (too late) about the mmc brick bug (couldn't find anyone speaking about it in any tutorial until I reached this point... nothing on CM wiki or in other tuto... classic!).
I hope I'm not in this case though as I can still go to DL mode, and the phones having the brick bug are completely dead (blank screen or no DL mode), as per http://forum.xda-developers.com/showthread.php?t=1756242
I managed to finally get CWM working only by using GT-I9100_ICS_ClockworkMod-Recovery_5.5.0.4.tar from Odin, then tried to install CM9.1 from SD card but after reboot it is stuck on the blue cyanogenmod animation boot screen and nothing happens.
Tried also to restore from CWM my nandroid backup, but during the restore it seems to hang then restart by itself, and then I'm back to Galaxy S boot logo (the animated one with the big S).
And after this I have lost again access to recovery mode.
I can't go back to stock and I can't install CM... I was not expecting such issues, it all seemed pretty basic on paper.
I'm really stressed and don't know what to do
Flash a stock rom in Odin (download mode), re-root your phone/flash a kernel with CWM, restore your backup ?
Hi,
thanks for answering,
I have tried to locate such a rom, but I'm not sure which one... is there a specific one to try ? could you point me to it please ?
so far I have tried I9100XXLPQ_I9100OXALPQ_I9100XXLPQ_HOME.tar.md5
but no luck
you also say "re-root", at the time I used this method:
[GUIDE] ROOT/UNROOT Stock ICS Firmware without flashing unsecure kernel - xda-developers
http://forum.xda-developers.com/showthread.php?t=1501719
Do I need root to install Siyah kernel from Odin ?
I'm trying one from sammobile... let's hope :/
The bad thing is I had no Yellow triangle at the beginning since I'm stuck in this boot loop or no boot to be precise.
Now that I have tried different things to fix it, it is still not working and I have my flash counter = 10.
I cannot even go back to the shop, is there a way to reset it knowing I cannot even reach the OS, I have only DL mode or CWM...
Use a stock rom for your region/carrier (or any stock rom from any region really), it doesn't really matter as I presume you'll be restoring a backup and/or going back to a custom rom anyway won't you ?
Samfirmware & AndroidFirmwares.net have lots of stock roms.
No, you don't need root to flash an Odin version of Siyah. So yes, you can flash that after you've got stock up & running to root your phone rather than re-rooting your phone by flashing a CFRoot kernel or using another root method. Just make sure the version of Siyah you're going to flash matches up with the stock rom you've got on (I.E if you flash a GB stock rom use GB Siyah, ICS stock = use ICS Siyah, etc, etc).
thank you again, I'm downloading the rom from sammobile matching my carrier,
Would you be so kind to send me a PM with your skype username or anything to "chat" with you ? I'm really worried and I spent all night already trying to fix it with no progress at all
Don't worry about the flash counter. That's the least of your problems while your phone is borked Worry about it when it's fixed. There's nothing you can do about the triangle while your phone is cactus.
When you've got it up & running again, use Triangle Away.
But first things first.
---------- Post added at 04:02 AM ---------- Previous post was at 03:59 AM ----------
You're welcome.
Um, no. Absolutely not. Nothing personal, but if I did that for every person who's asked me for 'hands on' help since I've been here, I'd have spent my time doing nothing else. I don't do 'personal' with people from XDA (which is why I have PM's blocked except for mods).
Besides, you're going to learn much more fixing this yourself. I've given you a stack of information thus far, ball is in your court. Every answer to every question you could possibly ask is on this site. It just sometimes takes a bit of work/reading on your part to find it.
megosu said:
thank you again, I'm downloading the rom from sammobile matching my carrier,
Would you be so kind to send me a PM with your skype username or anything to "chat" with you ? I'm really worried and I spent all night already trying to fix it with no progress at all
Click to expand...
Click to collapse
ok I understand.. it is just I have literally spent more than 8 hours on it and had not make any progress at all (even worse I cannot return it to the shop because of the yellow triangle).
I appreciate your help, it gives me a bit of hope but I'm in a very bad situation and I feel I have read and do so much already with no success at all.
I will try your option of restoring the one from Sammobile, I have tried other before without any luck, maybe this one will do... (5min left to DL it).
thanks again for your support
I know where you're coming from. The first flash I tried when I got my phone in 2011 borked because I was careless, and it took me a bit over a day to get the right info/files/etc to get it fixed. I know it's frustrating/tiring/annoying & you're wondering at the start whether you can even fix it. But as long as you've got download mode 99 times out of 100 you can save it.
And as I said, it's good experience; once you've fixed it, you'll be able to handle anything that comes up in future
Let us know how you go. I'm going to bed shortly, but I'm sure someone else will step up & help if you have any further problems.
You're welcome Happy to point you in the right direction.
I have flashed the rom, the exact same one as I had before everything happened...
if it helps, I flashed it from Odin 3.04 as PDA.
I9100BVLPH_I9100TMULPH_I9100BVLPE_HOME.tar.md5
I'm now back to the Samsung GALAXY S2 GT-I9100 logo and nothing happens.
I cannot use recovery mode,
I can use DL mode (it shows 11 counts and current binary as Samsung official.)
update:
I left the phone on the first logo for about 5min and it moved to the next Samsung Galaxy S2 logo, with the big animated S.
I'm waiting but nothing else is happening.
I'm still desperate to fix it.
One thing which can be relevant, whenever I try to wipe or format /data from CWM, my phone is restarting after a few minutes or is saying it cannot be done.
I can format /cache and /system.
Could it be the root cause ? Any way of fixing it ?
Thank you
update: I cannot mount /data from CWM, it says Error mounting /data!
is it the brick bug ? :|
Easy now....your device is still good.
Those animations should take like 1-2 mins when you flash a rom.
Now, you are completly sure that you are actually flashing the right ROM for your device model?
If so, just keep flashing stock roms until you're up and running again, so you can start from scrap.
I tried, the issue is as soon as I flash a stock rom (through Odin), then I can't get into stock recovery mode anymore, I have to flash GT-I9100_ICS_ClockworkMod-Recovery_5.5.0.4.tar to get back the recovery mode.
I tried to flash several times, I think it is down to the fact I cannot mount or format /data.
Which is why I'm wondering if it is the famous brick bug.
My device is GT-I9100 and I took the stock rom from sammobile:
I9100BVLPH_I9100TMULPH_I9100BVLPE_HOME.tar.md5 which is ICS 4.0.4 (that I had before trying to move to CM9.1 and having all this mess in my hands.)
flash this:
http://www.sammobile.com/2012/11/15/i9100xxlsj-%E2%80%93-galaxy-s-ii-android-4-1-2-jelly-bean-test-firmware/.
you are on siyah kernel right?
what you wanna do know is to get to whatever rom your flashing, forget about cmw for now.
this also might help:
http://forum.xda-developers.com/showthread.php?t=1457458
So it is not lost yet ? Not the brick bug ?
just to be sure:
you want me to install through Odin: Siyah-s2-v5.0.1-CWM.zip
then going back to DL mode
I flash through Odin: I9100XXLSJ_I9100OXXLS1_OXX.zip (coming from your link).
anything I'm missing (even if it seems obvious, please let me know as I'm maybe missing something important)
?
I still cannot do Factory reset... is it a problem ?
I dunno what kernel you are using, If stock 4.0.4 kernel you should flash siyah first (safe kernel, no brick bug), and then countinue flashing the ROM. Check out the brick bug thread in general SII forum for directions if you want.
BTW, Odin recognizes your phone right? Check it out, you'll get a huge long breath.
BTW 2: you don't have any kies applications running in your pc.....am I right? if so, CLOSE THEM ALL!
I did had stock 4.0.4 kernel when I first tried to follow CM9.1 wiki, and I did a factory reset through CWM... which is why I think I might have bricked it...
I have checked the brick bug thread (too late it seems...) but so far I can't be sure if I'm in this case or not as they say they can't even reach DL mode, and I can.
Odin recognizes my phone, yes, but anything I flash is stuck on the animated logo.
I do not have Kies installed, just installed the drivers.
Related
Hello, sorry if this has already been answered but I did look around at similar scenarios and it seems to me that using odin to flash the stock kernel should fix it but on my device, however, it doesn't fix my problem. I beleive what I did was select update firmware from .zip in clockwork on accident. Idk if this is what you consider a "boot loop" because it doesnt restart it just sits there at the black galaxy s2 screen. Any insight would be great. I hate to have to buy a new one as it is quite alot of money. Like I said, sorry if this is already answered but after looking around for hours I still hve had no luck. Thanks in advance, Alex
Can you get into recovery (volume up+home+power) or download mode (volume down+home+power)?
I can get in to download and recovery mode both
The outlook is promising then. Without knowing what you've flashed, it's impossible to say what damage you've done, but if you don't mind losing your data, you can certainly get back to a working state by following [READ THIS] Got a Boot Loop? Don't post a New Thread!.
Before going down that route though, if you do want to keep your data, let us know what you flashed as it might be recoverable (maybe you just flashed the wrong kernel).
I can't say for sure what i flashed but I can say that i either flashed with an update or updated with a kernel??? sound right??? idk. the data isnt near as important to me as the 680 dollars my carrier will charge me for a new s2. Right now im using a junk alcatel tribe and im going through galaxy withdrawls.
Well before flashing anything else, make sure you definitely have an I9100, not some other variant (I notice you mentioned dollars). If you have a different model, you're in the wrong forums and might make things worse by following advice for the I9100.
I was pretty sure that it is the I9100 but i took the battery out and double checked. it IS the I9100
also for what it's worth when going into recovery(stock version) right after the text reading updating application it gives me an error in red. (E:install_application_for_customer:Can't unmount /preload copy application failed) and after the (Appling [yes it really spells it appling] Multi-CSC) it says Can't access to '/system/csc/TTT/system/'. However, the line after it says that it says Successfully applied multi-CSC
My first attempt to get back to a working phone without losing data would be to flash a stock kernel then, have you tried that?
Ok.. done.. but it still sits at the galaxy screen except now it has the triange due to the custom firmware
If that hasn't got you up and running then it's probably time to bite the bullet and follow the instructions from the boot loop thread linked above (which will also remove the triangle).
Maybe you can answer another question for me. When in recovery mode it says apply update from sdcard... why does it say that when it doesnt actually read from the sdcard? i have checked with the sdcard both in and out and the file directory in the recovery mode doesnt change. is it calling the usb storage an sd card?
ok when flashing a stock rom do i use the phone option in odin or the pda still
If you're flashing a stock rom from [ROM+Guide]Official i9100 Firmwares KG, KH1/2/3/4, KI1/2/3/4/8, KJ1/2 Download, then just follow the instructions from there (but usually PDA).
:'( Still wont boot.
What does happen, did any steps fail, any error messages?
Everything went smooth with no errors. No steps failed. Sitting at the boot screen is all it does though
Did you definitely wipe user data? (step 3). The final step of that thread is to try flashing a ROM which wipes, such as (non-stock) VillainROM 1.1.
well... yes i definitely wiped the user data and it was successfull when doing so. I didnt try the villian rom just because I thought that it was an optional thing but i will def. try it now that you bring it up. and hey, i really appreciate the help no matter what the outcome
(VillainROM 1.1 - XWKE7 base) I'm a UHKG7..... is this going to be a problem? just something i noticed and thought I would ask before going ahead
ANSWERED - Firmware Install - factory reset in recovery
I made a mess of a rom install rushing through rom Manager and now my phone can't get past the Samsung screen when booting, and I can't find out the version of my kernel to install the correct one without getting my phone on. I can get the phone into download mode and I have tried a number of different kernels but have had no luck. It's a UK phone so I know it's a XW or XX to start, I was wondering is their a kernel that works on any SGS2.
I have been having trouble with getting windows to recognize the phone and have found a number of fixes on this site which have worked and not worked (atm not connecting)
it's a sgs2 GT-i9100
Any advice greatly appreciated
Did you make a Nandroid backup? If so boot into recovery (vol up, power, home buttons) and restore the backup.
Can you get into recovery mode. Vol up plus home plus power. Then do a factory reset. this should get past the Samsung boot screen. Then flash another rom.
Sent from my ThinkPad Tablet using XDA App
Thanks for getting back, no unfortunately not, couldn't see recovery mode since the original failed rom install. That combination gets me to download mode now.
So as far as I can tell I need to get a firmware working properly or do a reset but I don't know which is the right firmware to use
Main thing is you can get to download mode. If you can do that, you can fix your phone 95% of the time.
You can find carrier/country specific firmware here or country-only/non-specific firmware here
owen5y said:
Thanks for getting back, no unfortunately not, couldn't see recovery mode since the original failed rom install. That combination gets me to download mode now.
So as far as I can tell I need to get a firmware working properly or do a reset but I don't know which is the right firmware to use
Click to expand...
Click to collapse
Just flash any CF-root kernel and then you have recovery back. Start flashing from there on.
Lennyz1988 said:
Just flash any CF-root kernel and then you have recovery back. Start flashing from there on.
Click to expand...
Click to collapse
I have tried a number of CF-root kernels and no joy. I tried a few more kernels this morning before work, including cf-root and siyahv2.6.4 and had no luck.
MistahBungle said:
Main thing is you can get to download mode. If you can do that, you can fix your phone 95% of the time.
You can find carrier/country specific firmware here or country-only/non-specific firmware here
Click to expand...
Click to collapse
I actually flashed some of those kernels XWKE1 for example and a few others with no joy.
The problem started when I tried to update the Galent Miui ICS which I see you are running. I (stupidly) didn't read through the statement as I had my NYE hungover and just put the update on my sd and used recovery to update which froze the phone at the boot screen. (I didn't do re-flash and I didn't wipe the data and everything else.) I know it sometimes takes time to boot but I had left it for a half hour to see if it would and no joy. I was no longer able to get to recovery mode so I tried a half dozen kernels with the same problems before putting up a post. I'm not sure would people find it inappropriate to talk about an this problem here, I thought as it's a kernel problem now it would be a better place to find the solution although my own lazy Miui install was the cause.
Flashing just the kernels obviously didn't fix the problem. Have you flashed any of the entire stock firmwares ? Choose the most recent firmware for your carrier/country from the first link I gave you (if there's more than two listed).
owen5y said:
I actually flashed some of those kernels XWKE1 for and a few others with no joy.
The problem started when I tried to update the Galent Miui ICS which I see you are running. I (studidly) didn't read through the statement as I was hungover and just pu the update on my sd and used recovery to update which froze the phone at the boot screen. I know it sometimes takes time to boot but I had left it for a half hour to see if it would and no joy. I was no longer able to get to recovery so I tried a half dozen kernels with the same problems before putting up a post.
Click to expand...
Click to collapse
MistahBungle said:
Flashing just the kernels obviously didn't fix the problem. Have you flashed any of the entire stock firmwares ? Choose the most recent firmware for your carrier/country from the first link I gave you (if there's more than two listed).
Click to expand...
Click to collapse
Yes I will try that. At work currently and so can't play with the phone. I will post the result this evening.
Thanks
NP. Let us know how you get on.
MistahBungle said:
NP. Let us know how you get on.
Click to expand...
Click to collapse
All good, I installed the firmware and was able to get into recovery mode from there. Did a factory reset because I was stuck in a boot loop. Going to give it a go again to upgrade to the new ics build. Any advice on the best process of getting there?
I installed the following firmware prior to the reset
UK
XWKE1:http://www.multiupload.com/15RY5CHHW9
Firmware info: PDA: XWKE1 Phone: NEKD5 CSC:H3GKD4
Yep. Given the problems you've been having, stay away from the currently alpha ICS builds that are floating around.
Frankly, that's a disaster waiting to happen.
Wait until CM (or someone else) releases something that's stable and has most things working in 4-6 weeks or so.
There's a ton of roms/kernels out there, do your research/reading & ask questions if necessary in the respective threads for those & then pick something out & try it.
And no, I don't do recommendations. Because nobody's phone come's out of the factory the same, nobody has the same phone setup & nobody uses the phone the same way.
owen5y said:
All good, I installed the firmware and was able to get into recovery mode from there. Did a factory reset because I was stuck in a boot loop. Going to give it a go again to upgrade to the new ics build. Any advice on the best process of getting there?
I installed the following firmware prior to the reset
UK
XWKE1:http://www.multiupload.com/15RY5CHHW9
Firmware info: PDA: XWKE1 Phone: NEKD5 CSC:H3GKD4
Click to expand...
Click to collapse
OK, I did like the Galnet Miui ICS rom I was running although there was a few bugs with it when it died it was difficult to charge again. That's fair if you don't want to give out recommendations it's shooting in the dark over the interenet I suppose. I will have a good look through the forum and se if I find something that I would think is suiting.
Thanks for your help, and the advice is appreciated
Hello first time rooting this phone. Its a SGH-I777. I used the guide from galaxys2root.com/. At first it didnt work because my computer didnt recongnize my phone. I tried a different computer and it seemed successful until it rebooted. When the phone rebooted it did nothing but stay on the first screen. I still have the ability to get into Odin mode(download mode), but that is it. When i put the phone in download mode and use Odin it allows me to download the "zimage" but after rebooting it is the same exact thing. I have tried the one click root, one click factory restore. Tried restoring it on Kies. and nothing work took it to a store and the guy said he tried but it would stop in the middle of the download the only option i had with him was purchasing a new mother board for $80. Does anyone have a solution that can help me fix my phone.
Before i attempted to root it, it had OS 2.3.6 with kernal 2.6.35.7.
Go to the development section and read the stickies. There you will find stock rooted packages you can flash with Odin.
Sent from my SGH-I777 using xda premium
@jmula,
Enter recovery and perform a wipe data/factory reset. That may clear the failure to boot. If not you'll need to flash back to stock and start over.
The yellow trangle is a result of flashing a custom kernel using Odin or Heimdall, and is expected. You are not the first person having problems with the tools provided by GalaxyS2Root. In the future, I would recommend you avoid his site.
And... as suggested, read and study till you understand the basics. Then if you have questions, feel free to ask.
creepyncrawly said:
@jmula,
Enter recovery and perform a wipe data/factory reset. That may clear the failure to boot. If not you'll need to flash back to stock and start over.
The yellow trangle is a result of flashing a custom kernel using Odin or Heimdall, and is expected. You are not the first person having problems with the tools provided by GalaxyS2Root. In the future, I would recommend you avoid his site.
And... as suggested, read and study till you understand the basics. Then if you have questions, feel free to ask.
Click to expand...
Click to collapse
the only option that i have is to put the phone in download mode. when i try to download any kernel it reboots and does not go past the booting screen with the triangle.
jmula said:
the only option that i have is to put the phone in download mode. when i try to download any kernel it reboots and does not go past the booting screen with the triangle.
Click to expand...
Click to collapse
You should be able to enter recovery. Hold down all three buttons, vol+ vol- and pwr, continuously until the phone boots into recovery. It could take 10 or 15 seconds or more. If that is unsuccessful, then since you can enter download mode, you will need to flash back to stock, or stock plus root. That is not just a kernel, but the entire package. Please see the links in my sig for instructions.
The dropbox links in the download repository are temporarily suspended until probably Monday night or Tuesday as someone abused and over-downloaded. But the hotfile links still work.
creepyncrawly said:
You should be able to enter recovery. Hold down all three buttons, vol+ vol- and pwr, continuously until the phone boots into recovery. It could take 10 or 15 seconds or more. If that is unsuccessful, then since you can enter download mode, you will need to flash back to stock, or stock plus root. That is not just a kernel, but the entire package. Please see the links in my sig for instructions.
The dropbox links in the download repository are temporarily suspended until probably Monday night or Tuesday as someone abused and over-downloaded. But the hotfile links still work.
Click to expand...
Click to collapse
i Downloaded ''UCLE5 Stock ICS plus Root'' . i placed the phone in download mode started Odin and placed file in PDA. It starts but gets stuck at cache.img
jmula said:
i Downloaded ''UCLE5 Stock ICS plus Root'' . i placed the phone in download mode started Odin and placed file in PDA. It starts but gets stuck at cache.img
Click to expand...
Click to collapse
The next thing I would suggest is to try and flash the UCKH7 full stock package with bootloaders. However, as the dropbox links in the download repository are currently suspended, you will have to download it from SamFirmware. To be able to download, you will need to register for free if you havn't already. Search sgh-i777 in the upper right hand corner of the page, then download the I777UCKH7 version. Let us know if that will flash.
Ok it finally wokred after countless times of changing usb ports. I used the one click recovery. It restroed my phone to 2.3.4 i had 2.3.6. I tried to update by kies to 4.01 and it didnt work. Kies froze. The queestion is how do i safltey root the phone?
jmula said:
Ok it finally wokred after countless times of changing usb ports. I used the one click recovery. It restroed my phone to 2.3.4 i had 2.3.6. I tried to update by kies to 4.01 and it didnt work. Kies froze. The queestion is how do i safltey root the phone?
Click to expand...
Click to collapse
Flash a .tar version of a custom kernel with Odin. I always use an old siyah.tar, but that's just me. There are other methods floating around but that's the quickest and easiest for me. I think there's an old entropy dd.tar around somewhere too. But just flash it through Odin and you're good to go, assuming you flashed one for your version of android. If you just want to get into recovery to flash something this works as well.
There may be links to tar versions of the kernels in creepy's sig I don't remember offhand.
Ok since i do not want to brick my phone again where it is just stuck at the boot loop. I tried looking for ways to root and when i tried some of them my phone went back to the problem it had it the beginning. Should i just call it quits or do you guys have a guide?
jmula said:
Ok since i do not want to brick my phone again where it is just stuck at the boot loop. I tried looking for ways to root and when i tried some of them my phone went back to the problem it had it the beginning. Should i just call it quits or do you guys have a guide?
Click to expand...
Click to collapse
Give up???
I personally don't think flashing a kernel with odin is the best way to root. It increments the flash counter, for one thing, though I'm not sure how many people care about that anymore. I would suggest that you use the stock plus root package to root the phone with odin. See the links in my sig.
Guide... did someone say guide?
Feeling the pain....
creepyncrawly said:
@jmula,
Enter recovery and perform a wipe data/factory reset. That may clear the failure to boot. If not you'll need to flash back to stock and start over.
The yellow trangle is a result of flashing a custom kernel using Odin or Heimdall, and is expected. You are not the first person having problems with the tools provided by GalaxyS2Root. In the future, I would recommend you avoid his site.
And... as suggested, read and study till you understand the basics. Then if you have questions, feel free to ask.
Click to expand...
Click to collapse
First, to Creepy....you've been a great resource here and I read a lot of what you post and you got me out of the very jam being discussed here. I made the mistake of trying to root via the galaxys2root.com site (actually, I thought it was a different site...was redirected), got the i9100 screen and a boot loop...couldn't go anywhere. I came back here and found resources eventually unrooting my phone all the way back to 2.3.4, then moved to 2.3.6, then the stock android 4.0.3 which updated to 4.0.4.
But I still want to root (4.0.4 shuts itself down A LOT...more than 4.0.3) and I have a Galaxy note 10.1 with JB 4.1.2 and I LOVE IT! I feel on a mission to get rooted and try out some of the JB roms I see talked about here, but can't seem to find the best way to root. I've heard exynosabuse referenced here (no links to it though) and I don't want to use the wrong one and mess up my phone. I've been reading for weeks here and there's obviously a lot of great material, but I'm not sure which material is critical to understand, and which is "nice to know" but might not even apply, and which material isn't even right. Very frustrating.
Judi
judib said:
First, to Creepy....you've been a great resource here and I read a lot of what you post and you got me out of the very jam being discussed here. I made the mistake of trying to root via the galaxys2root.com site (actually, I thought it was a different site...was redirected), got the i9100 screen and a boot loop...couldn't go anywhere. I came back here and found resources eventually unrooting my phone all the way back to 2.3.4, then moved to 2.3.6, then the stock android 4.0.3 which updated to 4.0.4.
But I still want to root (4.0.4 shuts itself down A LOT...more than 4.0.3) and I have a Galaxy note 10.1 with JB 4.1.2 and I LOVE IT! I feel on a mission to get rooted and try out some of the JB roms I see talked about here, but can't seem to find the best way to root. I've heard exynosabuse referenced here (no links to it though) and I don't want to use the wrong one and mess up my phone. I've been reading for weeks here and there's obviously a lot of great material, but I'm not sure which material is critical to understand, and which is "nice to know" but might not even apply, and which material isn't even right. Very frustrating.
Judi
Click to expand...
Click to collapse
The ExynosAbuse application is the only practical way to root 4.0.4 without changing base. You can download it as an attachment in the OP of the developer's thread, but read through the thread first to understand its limitations and risks.
Alternatively, you could flash 4.0.3 plus root from the development forum. If you choose that route, please read the thread to understand how to install a custom kernel, which is recommended whether you plan to install a custom firmware or not. The custom kernel will contain ClockworkMod Recovery so you can flash the firmware of your choice if you wish.
There are really several routes you could choose. All of them work. Another would be to flash back to stock Gingerbread plus root. For that see my guide How to Flash Custom Binaries Without Ever Incrementing the Flash counter!! (link in sig)
Hmmmmm..
Well, I see that their are many, more experienced than me following this thread and my following comment is not meant to jump on the knowledge train here, but............... I had the same event happen as the orig poster earlier today. I had installed an app,I then rebooted and it got a bit stuck on the Galaxy SII, What I did was go into recovery ,cleared the Dalvik cache and that is all I cleared. Then I re-installed the RR Rom .rar, which I keep on my SD, over everything and rebooted, it came back as it was 4 mins before . All I did after, was do a system restore(only) using Titanium BU. So when I see all the "clear and restore this and that" I started to doubt some of the more experienced than I. My 2 cents is, that, if one does not know EXACTLY ,how to correct an issue,leave it for our more knowledgeable brothers and sisters.
If I am wrong ,please except my appology.
b0bb said:
Well, I see that their are many, more experienced than me following this thread and my following comment is not meant to jump on the knowledge train here, but............... I had the same event happen as the orig poster earlier today. I had installed an app,I then rebooted and it got a bit stuck on the Galaxy SII, What I did was go into recovery ,cleared the Dalvik cache and that is all I cleared. Then I re-installed the RR Rom .rar, which I keep on my SD, over everything and rebooted, it came back as it was 4 mins before . All I did after, was do a system restore(only) using Titanium BU. So when I see all the "clear and restore this and that" I started to doubt some of the more experienced than I. My 2 cents is, that, if one does not know EXACTLY ,how to correct an issue,leave it for our more knowledgeable brothers and sisters.
If I am wrong ,please except my appology.
Click to expand...
Click to collapse
I don't know what you're trying to get across here. Yes, restoring a backup nandroid works. Yes, you can try wiping cache and dalvik to see if it fixes an issue. Yes you can restore apps via titanium backup. All these things are indeed true.
Phalanx7621 said:
I don't know what you're trying to get across here. Yes, restoring a backup nandroid works. Yes, you can try wiping cache and dalvik to see if it fixes an issue. Yes you can restore apps via titanium backup. All these things are indeed true.
Click to expand...
Click to collapse
Well if you did not fully grasp what I was trying to get across,you seemed to get it correct with your statement.
b0bb said:
Well if you did not fully grasp what I was trying to get across,you seemed to get it correct with your statement.
Click to expand...
Click to collapse
And yet you say, "All I did after, was do a system restore(only) using Titanium BU." This may have worked for you, but this is an absolute recipe for disaster, and should not be given as a recommendation.
And further, from what you say, you did not have the "same event happen as the orig poster." Instead you "had installed an app,I then rebooted and it got a bit stuck on the Galaxy SII." This is by far not the same as trying to root with a tool from GalaxyS2Root.
creepyncrawly said:
And yet you say, "All I did after, was do a system restore(only) using Titanium BU." This may have worked for you, but this is an absolute recipe for disaster, and should not be given as a recommendation.
And further, from what you say, you did not have the "same event happen as the orig poster." Instead you "had installed an app,I then rebooted and it got a bit stuck on the Galaxy SII." This is by far not the same as trying to root with a tool from GalaxyS2Root.
Click to expand...
Click to collapse
Hey Bro, I think you think that I am challenging you, trust me I am not and I thank you for correcting me and putting me in my place, which is a bit phone techie challenged, I'll stick to building submarines. Thanks for what you do here.
b0bb said:
Hey Bro, I think you think that I am challenging you, trust me I am not and I thank you for correcting me and putting me in my place, which is a bit phone techie challenged, I'll stick to building submarines. Thanks for what you do here.
Click to expand...
Click to collapse
Not at all. I want people to help others here. I want you to help other here as well. But it is important to post only accurate information. Inaccurate information can cause someone to do the wrong action. So I always correct misinformation.
I'm in a bit of a tight situation over here. My mom's phone was having issues, so she wanted me to fix it before I left to visit my grandparents. I found a stock ROM for the phone (GT-i9100 International) and flashed it, but the phone always got stuck on the "Samsung Galaxy SII GT-I9100" boot screen (occasionally it would show the "O2" screen, as it was a ROM for Ireland). I tried a different ROM (can't remember what country it was), and I'm still stuck with the same problem. This time no O2 screen though. I've downloaded my ROMs through sammobile.com and I'm using ODIN v1.83.
The label under the battery reads:
Model: GT-I9100
SSN: -I9100GSMH
What ROM should I use and where can I get it? I found this thread with a link to the ROM for the international version, but Hotfile has been shut down, so I can't download it.
Sorry if I could've found the answer with a few more hours of searching, but I've got less than 24 hours to find a fix and I was hoping that someone else could help me. Thanks a lot!
EDIT: I'm in the U.S., if that matters.
Try AndroidFirmwares.net or Samsung-Updates.com. If it were me in that situation (I.E not my phone), I'd be putting whatever the latest firmware is for the carrier/country.
Any region?
MistahBungle said:
Try AndroidFirmwares.net or Samsung-Updates.com. If it were me in that situation (I.E not my phone), I'd be putting whatever the latest firmware is for the carrier/country.
Click to expand...
Click to collapse
Should any region work to get the phone up and running? I just need to get it back up so that I can root it and flash CM10. Thanks.
Yep absolutely. If your end result is to root the phone & put a custom rom on, use any stock rom you can get your hands on. Though I'd be avoiding 4.0.4, anything other than that should be fine.
MistahBungle said:
Yep absolutely. If your end result is to root the phone & put a custom rom on, use any stock rom you can get your hands on. Though I'd be avoiding 4.0.4, anything other than that should be fine.
Click to expand...
Click to collapse
Is 4.1.2 OK, or should I go for 4.0.3 or below?
Doesn't matter, take your pick.
More info on problem
I tried installing two other ROMs (from androidfirmwares.net), one 4.1.2 and one 2.3.6. The 4.1.2 didn't get me anywhere, but after I flashed 2.3.6 the phone said the assert check failed. GT-i9100 is on the list of what it checked for. (I've never had any luck with the assert checks on any of my Samsung phones: GS Captivate, GSII Skyrocket, or AT&T GSIII. I've always had to remove the check in my update script.) I attached a picture.
EDIT: Since the attachment doesn't seem to be working, here's a Dropbox link.
Pic won't load for me, but it mentions 'recovery error', what exactly are you doing/what's the problem ?
MistahBungle said:
Pic won't load for me, but it mentions 'recovery error', what exactly are you doing/what's the problem ?
Click to expand...
Click to collapse
My process:
Open ODIN v3.09
Plug in the phone, already in download mode.
Click the AP button and load my .tar.md5.
Click Start.
Wait for it to finish, leaving the phone untouched on the table.
I just tried another USB cable, but to no avail. I've also tried unplugging the phone right after it reboots and ODIN says "PASS!", but no luck there either. I just tried another ROM that just finished downloading and it's giving me a similar getprop() error. At the bottom of the output in red it says:
E:Error in /cache/recovery/sec_csc.zip
(Status 7)
Installation aborted.
I don't think there's any way for me to edit the update script, as the tar contains a bunch of filesystem images. Even if it was easy to edit it would ruin the checksum verification.
Check out the picture on Dropbox here.
What are you trying to do in Android recovery ? Given what your stated aim is - get a stock rom on the phone, re-root it, put custom rom on, you shouldn't be using Android (I.E stock) recovery at any stage.
The process should be:-
*Flash stock rom with Odin in download mode (I.E phone off - home/vol down/power, not home/vol up/power)
*Root phone with whatever method
*Flash custom rom with CWRecovery, which you'll get once you root the phone
So....You need to go step by step. Start with flashing the stock rom with Odin, and try to boot the phone normally/make sure that was successful before doing the next two steps. Look for Hopper8's 'Odin troubleshooting' guide if you're having trouble getting a successful Odin flash.
Once you've done that, root the phone & make sure you have CWRecovery working, then flash the custom rom.
The phone boots to the recovery screen after it finishes flashing with ODIN. I put it into download mode, run ODIN, and then it that error screen comes up on the next reboot.
Try flashing the three part firmware linked to in Hopper's thread first (this will wipe the phone). I can't help but think we're missing some info re: what's been done to the phone previously here if the phone is booting into recovery mode after being Odin flashed. It shouldn't do that. After an Odin flash/pass the phone should boot normally, assuming it's not a case of the NAND being corrupted (it probably wouldn't boot into recovery if that was the case/you'd be left with constant bootloop)
I know you've mentioned what's on the sticker on the phone chassis under the battery but are you absolutely 100% sure it's an I9100 ?
MistahBungle said:
I know you've mentioned what's on the sticker on the phone chassis under the battery but are you absolutely 100% sure it's an I9100 ?
Click to expand...
Click to collapse
At the top of the download mode screen it says "PRODUCT NAME: GT-i9100". I don't know any other way to tell besides this and the sticker on the back. There are no carrier markings anywhere, and this phone was purchased because it had an FM radio, which only the international version had.
And assuming by "Hopper's thread" you mean this one, I can't because the files are no longer available.
In that case, you're stuck with the other suggestions to try in his thread & continuing to flash stock roms until you get a properly successful flash I.E phone boots/works normally. There might be something really obvious here being missed, but because we're not there with you/don't have the phone in front of us it might be difficult to work out.
It's working!
Yay, I got it to work! I flashed a custom kernel (jeboo), which allowed me to get into CWM. From there I sideloaded CM10 and now it's up and running! Only I still have a problem with internal storage... (That was the problem I was trying to fix originally.) Would the next thing to try to fix that be flashing a PIT file? If so, any tips for doing that?
I'm going to put off trying to fix that problem and do it when I get back. For now it works as a phone, and that's what's most important to her anyway. Thanks for your help MistahBungle.
Solved!
For anyone else who comes across this thread, I was able to solve my problem permanently by flashing a new PIT file. I found the correct PIT files for the GT-i9100 in this XDA thread. It seemed my partitions had become messed up long ago, as the phone had been showing a 2GB /data partition and only a 2GB internal SD card partition (which should've been closer to 12GB) for some time.
I choose a 4GB data partition (since I was running low on /data space last time). Oddly enough, booting the stock ROM after flashing the PIT only showed a 2GB data partition. Once I flashed CM10 it showed as 4GB though.
please help me! I'm new here, so "A thousand pardons to you all for making myself such a headache to you all"... S3 won't boot, but it can go download, and recovery mode..
So here's the story, my dad told me to root his phone and make it overclock. First I rooted it using CF-Auto Root, and it worked really fne, no problems at all. Next, I searched the web, and came across the siyah kernel. I downloaded it's tar file form its site, which directed me to another site that lets me choose between the cwm flashable and the odin one which is the tar file.
After that, the screen flashes the model of the s3, then the logo of siyah, which is the freaky eye thingi. Then it would just go black, I waited 30 mins but nothing happened at all. Based on my research and gut feeling, it got bricked, or worse... HARD BRICKED!!! but I knew it wasn't hard bricked cause it could go download and recovery mode...Such a blessing..
I didn't want any trouble from my Dad, looking right at me with his bricked phone and me helplessly doing nothing, I tried stupid things like, somewhat stupid. Like searching for some random stock kernel (to replace Siyah) of s3 like the gt-i9300 xxx something with it's bootloader and then flashing it using odin pc and phone in download mode (cause I didn't know what to use but I'm very certain its GT-I9300). When I did that the logo of siyah kernel wasn't there anymore. But then again didn't boot...
PLEASE HELP!!! Excluding the method of USB jig, and bringing it to Samsung services.. Any help information about my current situation is really appreciated
More information:
Binary count is 4
CWM recovery enabled
Download recovery enabled
CF-Auto Root used to root
Siyah kernel was previous kernel, but replaced by kernel and bootloader I9300XXEMF1.tar
The last thing I did was to wipe cache partition and factory reset.
Current problem:
Won't boot
What I want to happen:
Bring back to its orginial state, without root, like I bought an S3
Again, it's an honor to be here at XDA Thank you all!
Late_Knight said:
please help me! I'm new here, so "A thousand pardons to you all for making myself such a headache to you all"... S3 won't boot, but it can go download, and recovery mode..
So here's the story, my dad told me to root his phone and make it overclock. First I rooted it using CF-Auto Root, and it worked really fne, no problems at all. Next, I searched the web, and came across the siyah kernel. I downloaded it's tar file form its site, which directed me to another site that lets me choose between the cwm flashable and the odin one which is the tar file.
After that, the screen flashes the model of the s3, then the logo of siyah, which is the freaky eye thingi. Then it would just go black, I waited 30 mins but nothing happened at all. Based on my research and gut feeling, it got bricked, or worse... HARD BRICKED!!! but I knew it wasn't hard bricked cause it could go download and recovery mode...Such a blessing..
I didn't want any trouble from my Dad, looking right at me with his bricked phone and me helplessly doing nothing, I tried stupid things like, somewhat stupid. Like searching for some random stock kernel (to replace Siyah) of s3 like the gt-i9300 xxx something with it's bootloader and then flashing it using odin pc and phone in download mode (cause I didn't know what to use but I'm very certain its GT-I9300). When I did that the logo of siyah kernel wasn't there anymore. But then again didn't boot...
PLEASE HELP!!! Excluding the method of USB jig, and bringing it to Samsung services.. Any help information about my current situation is really appreciated
More information:
Binary count is 4
CWM recovery enabled
Download recovery enabled
CF-Auto Root used to root
Siyah kernel was previous kernel, but replaced by kernel and bootloader I9300XXEMF1.tar
The last thing I did was to wipe cache partition and factory reset.
Current problem:
Won't boot
What I want to happen:
Bring back to its orginial state, without root, like I bought an S3
Again, it's an honor to be here at XDA Thank you all!
Click to expand...
Click to collapse
Download stock firmware from Sammobile >> http://www.sammobile.com/firmwares/1/ << and flash with Odin if you get bootloop after flashing reboot to recovery and wipe cache/factory data reset see if that works if not post your results here.