Hi,
I have problem with my SE x10 mini.I flashed kernel E10_nAa-14_2.6.29.6-nAa-14 and i go to recovery and flashed rom miniCM 10.
Now i run phone and show logo Naa and show logo Cynogen mod.... iam waiting about 15 mins and always i see Cynogen men logo.
I hard reset mobile (center button + power) now i wont run phone and phone do nothing.No logo , No vibrate and I cant connect phone
to Flash mode (back button + usb).It do nothing.Can me anybody help plzz ?
Sorry for my bad english
supermancz said:
Hi,
I have problem with my SE x10 mini.I flashed kernel E10_nAa-14_2.6.29.6-nAa-14 and i go to recovery and flashed rom miniCM 10.
Now i run phone and show logo Naa and show logo Cynogen mod.... iam waiting about 15 mins and always i see Cynogen men logo.
I hard reset mobile (center button + power) now i wont run phone and phone do nothing.No logo , No vibrate and I cant connect phone
to Flash mode (back button + usb).It do nothing.Can me anybody help plzz ?
Sorry for my bad english
Click to expand...
Click to collapse
nAa-14 is for Gingerbread ROMS, ie, MiniCM7, if you want JellyBean you have to look for the nAa-JB kernel
To enter flashmode: Connect your usb-cable, press home and powerbuttons to reset, and then the back-button.
supermancz said:
Hi,
I have problem with my SE x10 mini.I flashed kernel E10_nAa-14_2.6.29.6-nAa-14 and i go to recovery and flashed rom miniCM 10.
Now i run phone and show logo Naa and show logo Cynogen mod.... iam waiting about 15 mins and always i see Cynogen men logo.
I hard reset mobile (center button + power) now i wont run phone and phone do nothing.No logo , No vibrate and I cant connect phone
to Flash mode (back button + usb).It do nothing.Can me anybody help plzz ?
Sorry for my bad english
Click to expand...
Click to collapse
you should flash nAn JB kernel for using miniCM10.
http://forum.xda-developers.com/showthread.php?t=1837135
SmG67 said:
nAa-14 is for Gingerbread ROMS, ie, MiniCM7, if you want JellyBean you have to look for the nAa-JB kernel
To enter flashmode: Connect your usb-cable, press home and powerbuttons to reset, and then the back-button.
Click to expand...
Click to collapse
Ye Ye but nothing will happen.I cant connect to falsh mode
I think the phone is frozen. Sometimes my X8 does that too, after a reboot, it freezes and the screen is off, and it doesn't do anything when I press any button (but it's turned on). I have to pull the battery out and put it back in and then it turns on properly. So I think you have to wait until the battery is fully discharged, so it turns off. Or maybe you can turn it off somehow, I don't know the X10 mini well. Or disassemble it and disconnect the battery.
ofc, thats bad, nAa 14 works only for gingerbread . . . what about seus ?
take some time to read the FAQs
flashtool will work anytime.
prepare flashtool with the kernel you want, and click flash button
force reboot (power+home) and plug the device to pc keeping back button pressed
after flash completed, reboot to recovery and wipe /system, /data, /cache, /dalvik-cache
install correct rom+ gapps.
enjoy
PS: your brick, is NOT a brick
supermancz said:
Hi,
I have problem with my SE x10 mini.I flashed kernel E10_nAa-14_2.6.29.6-nAa-14 and i go to recovery and flashed rom miniCM 10.
Now i run phone and show logo Naa and show logo Cynogen mod.... iam waiting about 15 mins and always i see Cynogen men logo.
I hard reset mobile (center button + power) now i wont run phone and phone do nothing.No logo , No vibrate and I cant connect phone
to Flash mode (back button + usb).It do nothing.Can me anybody help plzz ?
Sorry for my bad english
Click to expand...
Click to collapse
U just have to remove your battery. just open youe back cover then u will find a small rubber like thing near camera just open it and you will find batty connector.Now you just have to unplug it and again plug it.
Problem solved thanks for leylmaster. I wait for empty battery (freeze phone)
:beer:
Sent from my E10i using xda app-developers app
Related
if your x10i brick (SE Logo) and can't reboot can't access xrec and can't access flash mode (for flash generic rom)
i have a solution..
1. connect the phone to PC (USB)
2. open superOneClick v1.55 and click shell root icon
3. open FlashTool 0.2.9.1 and click Ask Root Perms
4. click menu advanced --> clean --> clear cache
5. click xrecovery icon
6. click menu advanced --> Xrecovery--> Reboot into Recovery
7. look you phone.. bingo.. u can access Xrecovery and then just install u favorit custom rom n reboot..
8. now u phone normaly n u can access flash mode to flash generic rom..
and.. sory my english is bad hehe...
jakadewantara said:
if your x10i brick (SE Logo) and can't reboot can't access xrec and can't access flash mode (for flash generic rom)
i have a solution..
1. connect the phone to PC (USB)
2. open superOneClick v1.55 and click shell root icon
3. open FlashTool 0.2.9.1 and click Ask Root Perms
4. click menu advanced --> clean --> clear cache
5. click xrecovery icon
6. click menu advanced --> Xrecovery--> Reboot into Recovery
7. look you phone.. bingo.. u can access Xrecovery and then just install u favorit custom rom n reboot..
8. now u phone normaly n u can access flash mode to flash generic rom..
and.. sory my english is bad hehe...
Click to expand...
Click to collapse
sorry i`m spanish and my english is very bad.
My problem: my x10 cant acces flash mode because pc dont detect the phone. Dont charge, etc... the brick block charge dock, mini usb...any solution please.
try thread from DoomLORD : [DEV][How-To] Get Back to Stock Even With Broken / Damaged USB Port in http://forum.xda-developers.com/showthread.php?t=1054818
tarzerixx said:
sorry i`m spanish and my english is very bad.
My problem: my x10 cant acces flash mode because pc dont detect the phone. Dont charge, etc... the brick block charge dock, mini usb...any solution please.
Click to expand...
Click to collapse
Likely the USB port is dead and you have to send it in for repair.
I used flashtool 3.0, pretended I was gonna flash 2.1 onto it and wella it worked. Your idea fixed my phone Dude. Thanks for the help.
pccobra said:
I used flashtool 3.0, pretended I was gonna flash 2.1 onto it and wella it worked. Your idea fixed my phone Dude. Thanks for the help.
Click to expand...
Click to collapse
Please mention the steps, or link, when i press on shell root(in superone click) it keeps on waiting for device. (flashtool never enables ask for root).
NOTE: It happened when I was trying update my ROM Wolfbreak , I did factory rest and all other resets available on xRec . (xcluding sd card format) then i thought i should try reboot before installing new ROM. but it stucks on SE logo screen. please give me some thoughts to make it in working mode again
Thanks
RedAxe said:
Please mention the steps, or link, when i press on shell root(in superone click) it keeps on waiting for device. (flashtool never enables ask for root).
NOTE: It happened when I was trying update my ROM Wolfbreak , I did factory rest and all other resets available on xRec . (xcluding sd card format) then i thought i should try reboot before installing new ROM. but it stucks on SE logo screen. please give me some thoughts to make it in working mode again
Thanks
Click to expand...
Click to collapse
Hapenned the same to me...
I try to follow the steps, but i can't pass step 4 (it's unavaiable the "clean cache" bottom...)
Please help...
Restore original firmware with SEUS
RedAxe said:
...then i thought i should try reboot before installing new ROM. but it stucks on SE logo screen...
Click to expand...
Click to collapse
My X10 mini was a brick (or I thought it was) because it was behaving like you described: the phone was stuck on the SE logo and it wasn't entering Flash Mode although I pressed the back key when the Sony Ericsson white letters were displayed.
Here is my solution
Open SEUS and select your phone. Click Next.
SEUS will wait for the device.
Connect your bricked phone via the USB cable.
Then you must access Flash Mode, at all costs.
SEUS, PC Companion and FlashTool can detect this phone only in Flash Mode.
Note: If your phone is resetting correctly (pressing and holding Power+Center) and the phone is being detected as an unmounted removable drive on the computer as mine did, it should be able to enter Flash Mode, no matter it has been already stuck for ages on the first screen with the white letters. My phone had enough battery charge to go through the whole process.
To enter Flash Mode with the Xperia X10 Mini I had to:
1. Perform a hard reset of the phone (Press and hold Power+Center)
2. As soon as the phone vibrates, release both keys. Phone will restart.
3. The white Sony Ericsson logo will be displayed.
4. Press and hold Power+Center and immediatly the Back key (the three keys at the same time)
5. Keep the keys pressed until the LED turns green.
After doing the correct sequence and entering Flash Mode, the LED turns green and the screen turns completely black. SEUS detected my phone at this point, downloaded the original firmware and installed it automatically.
do u have trick for my problem here forum.xda-developers.com/showthread.php?t=1388476
my x10 just vibrate once and stack on blank screen.
Sent from my X10i using Tapatalk
When I use SEUS It keep saying "You have the newest software available"
I tried the hard reset and all. The phone now just won't start at all
Hi,
i got the same problem what you describe ive stuck at the SE logo and cant get into recovery and i cant use flashtool. i tried to do what you say in the first post, but when i press the shell root button, it says "wait for device" then its not responding, and i cant moce on to the next step... what should i do now?
Ketoth said:
My X10 mini was a brick (or I thought it was) because it was behaving like you described: the phone was stuck on the SE logo and it wasn't entering Flash Mode although I pressed the back key when the Sony Ericsson white letters were displayed.
Here is my solution
Open SEUS and select your phone. Click Next.
SEUS will wait for the device.
Connect your bricked phone via the USB cable.
Then you must access Flash Mode, at all costs.
SEUS, PC Companion and FlashTool can detect this phone only in Flash Mode.
Note: If your phone is resetting correctly (pressing and holding Power+Center) and the phone is being detected as an unmounted removable drive on the computer as mine did, it should be able to enter Flash Mode, no matter it has been already stuck for ages on the first screen with the white letters. My phone had enough battery charge to go through the whole process.
To enter Flash Mode with the Xperia X10 Mini I had to:
1. Perform a hard reset of the phone (Press and hold Power+Center)
2. As soon as the phone vibrates, release both keys. Phone will restart.
3. The white Sony Ericsson logo will be displayed.
4. Press and hold Power+Center and immediatly the Back key (the three keys at the same time)
5. Keep the keys pressed until the LED turns green.
After doing the correct sequence and entering Flash Mode, the LED turns green and the screen turns completely black. SEUS detected my phone at this point, downloaded the original firmware and installed it automatically.
Click to expand...
Click to collapse
u totally saved me =D
X10 mini revived!
Hi,
The procedure described above works fine until you've the phone recognized by the computer.
Here's how It has finally been recognized:
1) Completely switch off the phone (Do not leave it with SE logo).
-You can do the either by removing the battery connector (be cautious) under a rubber on the left(not above) of the camera lens.
-OR when the USB is plugged in,
(1.1) press center + back + power button until power off,
(1.2) then release center and power button AND KEEP back button down(about 2-5 seconds) until green led lights on. remark:LED will stay green until you unplug USB or phone switches on.
(1.3) Unplug USB.
Your phone should be OFF now. SE logo doesn't appear anymore (Wait 30s to be sure)
2) Unplug the USB cable from computer and plug it in another USB port of the PC.
3) At this time, if you plug USB on your X10 mini, it should be recognized as a SEMC device (It has worked for me).
-Success? Go step 4
-Failure, retry (from step 2 should be enough) with another USB port. If you've tryied all ports already, I've no idea.
4) If step 3 is successful, unplug USB.
5) Start SEUS (update service program from SE), choose you phone, follow the instructions on screen. Remark: Even if it says that you've got the last version, there is an "Install" button available on the bottom right corner. Click it!
Hope it'll help.
deBelch.
PS: Many thanks the whole forum for the help provided.
hello guys..my se xperia x10 mini pro stuck on the SE logo..and i tried to press power+ home button but it din't change anything.It also give 0.3sec led green flash while pressing the power and the menu button.can anyone plz help me with this..???
cruzstar said:
hello guys..my se xperia x10 mini pro stuck on the SE logo..and i tried to press power+ home button but it din't change anything.It also give 0.3sec led green flash while pressing the power and the menu button.can anyone plz help me with this..???
Click to expand...
Click to collapse
Update phone using SEUS....
Just google SUES
Definitely it will work....
Sent from my X10i using xda premium
yea i have use the SEUS..by pressing the back button..but it dont work..plz help me
Dear sir i already done that procedures but no use in seus shown u already updater software. plz help me
Cannot unbrick xperia mini E10i
Ketoth said:
My X10 mini was a brick (or I thought it was) because it was behaving like you described: the phone was stuck on the SE logo and it wasn't entering Flash Mode although I pressed the back key when the Sony Ericsson white letters were displayed.
Here is my solution
Open SEUS and select your phone. Click Next.
SEUS will wait for the device.
Connect your bricked phone via the USB cable.
Then you must access Flash Mode, at all costs.
SEUS, PC Companion and FlashTool can detect this phone only in Flash Mode.
Note: If your phone is resetting correctly (pressing and holding Power+Center) and the phone is being detected as an unmounted removable drive on the computer as mine did, it should be able to enter Flash Mode, no matter it has been already stuck for ages on the first screen with the white letters. My phone had enough battery charge to go through the whole process.
To enter Flash Mode with the Xperia X10 Mini I had to:
1. Perform a hard reset of the phone (Press and hold Power+Center)
2. As soon as the phone vibrates, release both keys. Phone will restart.
3. The white Sony Ericsson logo will be displayed.
4. Press and hold Power+Center and immediatly the Back key (the three keys at the same time)
5. Keep the keys pressed until the LED turns green.
After doing the correct sequence and entering Flash Mode, the LED turns green and the screen turns completely black. SEUS detected my phone at this point, downloaded the original firmware and installed it automatically.
Click to expand...
Click to collapse
Hello Guys,
I need your urgent help.
I cannot restore phone with SEUS or Companion. It says I already have the soft.
Getting fatal errors in Flashtool, I am stuck with SE logo and bootloader relocked.
I have the stock kernel but CM7 ROM.
Do you have any other ideas?
Tanks a lot!
deBelch said:
Hi,
The procedure described above works fine until you've the phone recognized by the computer.
Here's how It has finally been recognized:
1) Completely switch off the phone (Do not leave it with SE logo).
-You can do the either by removing the battery connector (be cautious) under a rubber on the left(not above) of the camera lens.
-OR when the USB is plugged in,
(1.1) press center + back + power button until power off,
(1.2) then release center and power button AND KEEP back button down(about 2-5 seconds) until green led lights on. remark:LED will stay green until you unplug USB or phone switches on.
(1.3) Unplug USB.
Your phone should be OFF now. SE logo doesn't appear anymore (Wait 30s to be sure)
2) Unplug the USB cable from computer and plug it in another USB port of the PC.
3) At this time, if you plug USB on your X10 mini, it should be recognized as a SEMC device (It has worked for me).
-Success? Go step 4
-Failure, retry (from step 2 should be enough) with another USB port. If you've tryied all ports already, I've no idea.
4) If step 3 is successful, unplug USB.
5) Start SEUS (update service program from SE), choose you phone, follow the instructions on screen. Remark: Even if it says that you've got the last version, there is an "Install" button available on the bottom right corner. Click it!
Hope it'll help.
deBelch.
PS: Many thanks the whole forum for the help provided.
Click to expand...
Click to collapse
nope...didnt work...there is NO Install beneath...wonder why? is it i am using the latest SEUS?
greetings. please i followed your steps to unbricked my device but my x10 cant boot into flash-mode. whenever i try to connect it via flash-tool. the green light comes on but in some few seconds it boot automatically. and when i try to flash anything it boot automatically. please help me
---------- Post added at 12:21 AM ---------- Previous post was at 12:16 AM ----------
greetings. please i followed your steps to unbricked my device but my x10 cant boot into flash-mode. whenever i try to connect it via flash-tool. the green light comes on but in some few minutes it boot automatically. and when i try to flash anything it boot automatically. please help me
Help me ppl ! I screwed up big time !!
I originally got X10 mini with Android 2.1 and relatively old firmware ...anyway I rooted my phone, took the backup and then Flashed a CWM Recovery on it !
Factory WIPED all the data for the new ROM ......
Then I was about to Flash this CM 7.1 ROM when all of a sudden it displayed the message that it wont work wihout the Latest Firmware .... so from there on I had no choice but to Restore my Backup and go back to a working OS, so I could easily proceed with Firmware update ...... but that never happened !!!
The Backup couldnt be recovered ...it failed for i dont know what reason ....ever since then the device never worked beyond the WHITE Sony Ericsson LOGO !!! Im stucked ..... even the CWM Recovery isnt working now !!
I'm stucked !! I've been looking for a solution for almost 3 days now .... but had no luck !!! dont know what to do from here on!! KINDLY HELP !! plzz plzz plzzz !! I desperately need to fix this !! the device even aint mine !!!
restore to stock by using sony ericsson update service
First, don't panic
And you have to notice and make this a lesson; if CWM said that your baseband is incompatible, it means, CWM is not flashing anything to your phone, yet.. So you only have to restart the phone, instead of recovering your CWM backup, and you'll be back to your default OS
Second, now find a tool named FlashTool, and also find a 2.1 stock firmware.. now proceed to flash with USB cable, you'll find the instruction together with the tool
Third, you'll be OK, trust me
first of all moedjs man !! Thx for sympathy n giving me courage !!
but could you kindly confirm that FlashTool would still work even If I'm unable to mount USB anywhere !! coz USB would charge phone but since I'm stuck on Sony Ericsson Logo and cant go beyond that point I'm unable to update my Firmware via PC Companion tool by Sony Ericsson tooo !!!
Thats the main reason I was panicking mate !! Kindly Kindly confirm that for me !! n I'm already liking your positive attitude ..so I do trust ya !! THX again !!
i don't understand why you can't use official seus? afaik it doesn't need anything beyond the se logo. power off phone, run seus on the pc, plug the cable while pressing the back key, etc; right?
dr.norton said:
i don't understand why you can't use official seus? afaik it doesn't need anything beyond the se logo. power off phone, run seus on the pc, plug the cable while pressing the back key, etc; right?
Click to expand...
Click to collapse
Sir I've been through that .... for some reason it didnt work for me beyond "plug the cable while pressing the back key" STEP !! i dont know why !! i didnt have any effect watsoever, therefore I couldnt proceed with the 3rd STEP of Updating it ! =(
and is there anyway to Remove the battery !! coz once I use Home+Power Key combo it restarts device ...... is there any other combo to power off the phone, so I can atleast save battery !! anyway m also givin FLASHTOOL a try !!
can't power off? well, try these steps:
start seus on pc
connect phone and pc with usb cable
press both middle and right button at the same time and press the power button
when phone goes down keep pressing only the right button
dr.norton said:
can't power off? well, try these steps:
start seus on pc
connect phone and pc with usb cable
press both middle and right button at the same time and press the power button
when phone goes down keep pressing only the right button
Click to expand...
Click to collapse
Man I just tried turning on my device for the first time today !! Battery was discharged i guessed so Initially I got Red blinking LED light .... now even that its stable on Green .... !! my device isn't turning on !! not even showing that white Sony Ericsson logo now ! i dont know whats happening here !!
I'm trying to be calm but stuff like that keeps happening to me !! Kindly guide me with that !! its still green I hold power button n yet its showing no sign of turning on ! =(((
do you see charging battery in your screen? have you waited enough to boot it again and try the steps above?
still, if you need to disconnect the battery, here is a disassembling guide: http://goo.gl/jDd6q
dr.norton said:
do you see charging battery in your screen? have you waited enough to boot it again and try the steps above?
still, if you need to disconnect the battery, here is a disassembling guide: http://goo.gl/jDd6q
Click to expand...
Click to collapse
Wow thanks for that Dis-Assembling guide ..... !! I'll ultimately have to try this if everything else fails ....
well I never saw Battery charging on screen !! i think not even when it was working fine !!
I think i'll give it some more time with charging !! coz it just showed me that SE logo again .... but when I tried to restart it .... the screen didnt turn back on !!!
also when SE Logo appears it appears automatically ......dont have to turn on the device ... and then also green LED light turns off ..... Im not sure whether its still charging at that time or not !! I think NOT ! this is kinda dodgy ! what do you reckon ?
no led light, no charge, i think. have you tried triple keys way again? it's kind of tricky, do it carefully.
Yeah I did !! I pressed HOME+Back at the same time and then had to Hold the Home button to turn the screen off ! then I repeatedly kept pressing the BACK button!
actually from there on it started blinking that RED Led light again .... ! I think its still needs more charging .... but then again If it charges enough to power the screen on automatically ..... the Green LED disappears .... so M kinda stuck in the loop here !
Oh God Help me !!
devilzeye793 said:
I pressed HOME+Back at the same time and then had to Hold the Home button to turn the screen off ! then I repeatedly kept pressing the BACK button!
Click to expand...
Click to collapse
it sounds not right pal
but by:
Middle Key : u meant HOME
Right Key : u meant BACK
isn't it ??
devilzeye793 said:
but by:
Middle Key : u meant HOME
Right Key : u meant BACK
isn't it ??
Click to expand...
Click to collapse
yes, but there's power key too. and there's no repeating but holding the back key constantly.
dr.norton said:
yes, but there's power key too. and there's no repeating but holding the back key constantly.
Click to expand...
Click to collapse
I did try this method ....it has no effect ..!! it keeps on waking screen on !! and sony ericsson logo doesnt go away !!
NEITHER is FLASHTOOL working for me !! =(
a. Unplug your USB cable from PC
b. Power off your phone
c. Press back button and keep your finger on button
d. Plug USB cable to PC
e. Check if the green LED appear
f. On popup message press "OK" button
That OK Button never appears for me !! I dont knw wat to do next
Kindly help !!!!
i think flashtool needs a working system.
can you power off your phone or not? if able to do so, seus should work.
so, you have just one option if you can't start recovery: using seus.
and you've two options to start seus: the standart way, or the triple buttons way.
if you can enter recovery, you can try to wipe everything and flash a rom.
these are all i can say about it. hope you can solve it.
dr.norton said:
i think flashtool needs a working system.
can you power off your phone or not? if able to do so, seus should work.
so, you have just one option if you can't start recovery: using seus.
and you've two options to start seus: the standart way, or the triple buttons way.
if you can enter recovery, you can try to wipe everything and flash a rom.
these are all i can say about it. hope you can solve it.
Click to expand...
Click to collapse
When charged enough there's no way to turn the device off ! I've tried both HOME+POWER & HOME+BACK then POWER (holding the back Key towards the end) button none of them actually works ! The Screen keeps powering back on, showing up that Sony Ericsson Logo !
Could it be USB Bricked or something ? (Apparently, since I cant access recovery I cant mount the device)
Try:
- turn off phone
- wait for 1 minute, phone still off
- connect to usb with flashtool
I have almost the same problem, my phone have been breaked several times but every time i had access to xrec or internet to solve problem.But this time when phone dischared for first time n I wanted to start it again I found that it's not gonna boot! Stuck on SE text logo... (I flashed CM7)
now it's charged ( although the screen was on, showing SE) n I have flasher n a rom.
but when i start to flash after showing "start Falshing" on screen (CMD) some seconds pass n CMD shows "write failed" n other things...
When i connect my phone to pc red LED shows itself for some seconds n after it disconnects itself while i'm pressing the back key...
And two questions:
1. Does it matter what the name of the ROM file -in firmware folder- is?...
2. I have to ftf files. on is about 108 MB n the other one 280 MB. Eachone can be a ROM?(I have tested Flasher with both of them.)
tnx
I've tried to put CM10 on my Xperia Sola, and i've followed the guide on the freexperia site, which i cant link.
After i've flashed the kernel, which was succesful, the phone won't turn on. It isn't recognized by my computer either. Can you help me fix this problem?
crevatsch said:
I've tried to put CM10 on my Xperia Sola, and i've followed the guide on the freexperia site, which i cant link.
After i've flashed the kernel, which was succesful, the phone won't turn on. It isn't recognized by my computer either. Can you help me fix this problem?
Click to expand...
Click to collapse
Hi, there is no CM 10 for Sola, may be you flashed wrong kernel. Try charge your phone for a few hours, after that try to put on flashmode (vol - and usb plug) and flash stock ROM via flashtool.
mirost1 said:
Hi, there is no CM 10 for Sola, may be you flashed wrong kernel. Try charge your phone for a few hours, after that try to put on flashmode (vol - and usb plug) and flash stock ROM via flashtool.
Click to expand...
Click to collapse
Oh, i see!
I did this as well:
''1.Press all 3 mechanical button on the device at the same time . Yess ! yess ! all 3 buttons, The Power button , and Both the Volume Up and Down buttons .
2.When u press all the 3 buttons the same time , the device should vibrate . One Long Vibrate and then a gap and then 2 short vibrations . Let the device vibrate like this .
3.Repeat the above procedure 3 times . ( press all the 3 buttons same time and hold untill the device vibrates 3 times
4.Once above is done , then hold the Volume Up (+) button up and connect the USB cable in .
5.The devices should boot in fastboot mode with the blue lite .
Once u have the Blue lite ... u are set to go and reflash the firmware using Flashtools or any other way . '''
And now i have the blue light again, so i can flash the right kernel.
Thanks for the help!
Hi
I have a Xperia mini pro that wont start.
When i try to press the power button its vibrate as normal then the back button lights up sharp and the phone will not even boot or start only black screen.
This happened when i tryed to flash and root it with Flashtool.
Can somebody help please !
hallonet99swe said:
Hi
I have a Xperia mini pro that wont start.
When i try to press the power button its vibrate as normal then the back button lights up sharp and the phone will not even boot or start only black screen.
This happened when i tryed to flash and root it with Flashtool.
Can somebody help please !
Click to expand...
Click to collapse
Reflash the stock kernel you had before. Or if you don't find it, search for the stock rom .ftf for your device and flash it. But remember flashing the stock rom will wipe all data
Sent from my Nexus 4 running Android 4.2.2
Hello everyone..i tryed to install new ROM but i installed only this http://forum.xda-developers.com/showthread.php?t=2326515 .. i reboot phone and now cant power on ... If i connect charger red led flashing for 2-3 sec. and nothing happening.. if i pres Power+ Vol UP a blue led under meniu button lights up for few second and after that nothing happened... if i press Power+ Vol Down a green color lights .. and same ...nothing happened..
If i unplug charger and try to open .. only vibrate one time and nothing happening..
Any solution ? i tryed to charge it ..nothing..
P.S : i used a multimetre and battery have 3.66V
Friend, its KERNEL! I hope you used fastboot to flash the boot.img.
90% sure it isnt bricked.
Try this, switch on your device and simulaniously press upper key( dont connect to any cable)you get in cwm mode.
Check this and let me know .
What do you mean with upper key? Volume up ?
if yes i press that and for 1 sec blue led lights and vibrate.. after that nothing happened..i pressed around 5-10 sec.
And i flashed in CWM..
Well what i can see is that you have flash jelly bean kernal and you have ics stock!
When you power on the device all you can see is xperia logo and black screen right?
Power on device and continously press volume up button!
Tell me if you can enter cwm!
StyL3sX said:
Hello everyone..i tryed to install new ROM but i installed only this http://forum.xda-developers.com/showthread.php?t=2326515 .. i reboot phone and now cant power on ... If i connect charger red led flashing for 2-3 sec. and nothing happening.. if i pres Power+ Vol UP a blue led under meniu button lights up for few second and after that nothing happened... if i press Power+ Vol Down a green color lights .. and same ...nothing happened..
If i unplug charger and try to open .. only vibrate one time and nothing happening..
Any solution ? i tryed to charge it ..nothing..
P.S : i used a multimetre and battery have 3.66V
Click to expand...
Click to collapse
you are on locked bootloader right ??? you installed a custom kernel and hence u got brick ....... use Sony update service with phone switched off and plug it in when SUS asks you to ... it'll install the stock firmware and kernel and your phone will be okay.........
Simple words:-
1)download SUS
2)Run SUS
3)select phone
4)it'll give instructions how to connect phone in flashmode, do that.
5)it'll say you already have latest firmware , press repair or reinstall button.
6)wait.
7)You are done
Man, i can't entry in flashmode..the phone dosn't respont to any commands :-s
bootloader is locked or unlocked????
you have CWM installed,means your your bootloader is unlocked...i guess....
using flashtool just flash stock .FTF firmware......
i have CWM on it.. but cant entry ..i have 1 backup made with CWM but phone dosn`t respond ..
StyL3sX said:
i have CWM on it.. but cant entry ..i have 1 backup made with CWM but phone dosn`t respond ..
Click to expand...
Click to collapse
First try to flash a stock ftf using flash tool by flashmode
better it be a recent ICS rom and (first flash only the kernal and once again flash the whole rom):good:
StyL3sX said:
i have CWM on it.. but cant entry ..i have 1 backup made with CWM but phone dosn`t respond ..[/QUOT
Load the stock ics ftf in flashtool. when it asks to connect the cable HOLD volume down key and connect and then flash rom.
Click to expand...
Click to collapse