Found firmware files for firmware version 11416, not sure if they contain Qualcomm (signed?) bootloader.
But, since this is apparently the latest version that could contain this, Iam posting the link to the files.
http://code.google.com/p/nokia-lumia-800/downloads/list
Unfortunately I dont have my device to test this until apx 2 weeks time.
I know the .esco image is zip, and contains a signature file, together with boot.img - but - I dont know how to extract the boot.img to see if it contains (signed) qualcomm - or dload.
/Nieldk
EDIT: These files did not contain Qualcomm unlocked boot loader , locking tread
Can someone confirm FW 1600.2475.7720.11414 contain Qualcomm Bootloader?
Thanks in advance
EDIT: Flash yours FW but I have HW 2.4
Yes, I dont think the HW version will change, but hopefully - with luck - you got the DLOAD replaced with Qualcomm.
NielDK said:
Yes, I dont think the HW version will change, but hopefully - with luck - you got the DLOAD replaced with Qualcomm.
Click to expand...
Click to collapse
Hi
I have a nokia Lumia 800 (Tmob? DE)
i would like to help
What do i have to DO, please write a good step by steb guide
(as far i see a Zune backup ?
or the FW ? )
I Have Mango but not the newest
with DLOAD bootloader
How to Flash ? NSS ? NaviFirm ?
Best Regards
saywa said:
Hi
I have a nokia Lumia 800 (Tmob? DE)
i would like to help
What do i have to DO, please write a good step by steb guide
(as far i see a Zune backup ?
or the FW ? )
I Have Mango but not the newest
with DLOAD bootloader
How to Flash ? NSS ? NaviFirm ?
Best Regards
Click to expand...
Click to collapse
There is a pretty good guide here
http://smartphonegeeks.in/2012/03/t...-lumia-710-800-with-official-custom-firmware/
Just skip the first steps (downloading files using navifirm) and place the downloaded files from here in the folder described in the link.
The files you need are not the Zune backup, but the Navifirm files (packed with RAR 4 parts) and extract the RAR archive files (see image
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
) in that folder.
files are named
1600.2475.7720.11414.part1.rar
1600.2475.7720.11414.part2.rar
1600.2475.7720.11414.part3.rar
1600.2475.7720.11414.part4.rar
I don't have my Lumia 800 with me today, dammit!
Hopefully someone can test and I really hope it downgrades to Qualcomm bootloader
What?! Can someone confirm that it's true? Does it mean that we can finally unlock lumia 800?
It is missing the OSBL file, which is the Bootloader partition. Well, if it this firmware indeed contains the Qualcomm bootloader (which I think it doesn't), you should have "Qualcomm CDMA Technologies MSM" device when you press Power + Vol Up while your phone is turned off and the USB cable is connected to your PC.
@Osso17, can you try this procedure?
Is not possible rewrite bootloader version with a old FW.
Sent from my Lumia 800 using Windows Phone 7 App.
not sure as I said if it includes QC bootloader. The ....boot.esco file contains a 'boot.img".
Possible, I think, that BL is in that img file.
open boot.img with OSbuilder
if thats how u want it.
Thanks all, unfortunately this does not contain our missed QC unlocked bootloader
Related
Its Here!
Got this Suprise Black Friday gift in india
This popped up in pc companion window!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Backing up and updating...
I`m happy about that, long waiting for.
Says I can update too. Thanks for the tip!
Just a quick backup and I'll know for sure.
I'm in Norway btw.
Edit: Updated fine. Got eclair, need root
Successfully updated in Estonia
Someone who updated successfully please share your customization code. Here are instructions how to do it:
1. Lock the screen of your phone. Press the menu button (left button) so that the screen is lit but still locked.
2. Press the home (central button) and back (right button) in following sequence:
home-back-back-home-back-home-home-back
Try several times if you can not do it the first time. when successful secret menu will appear. Go to Service info->Software info and find "customization version"
It should be something like 1241-3708_R3A (this is my code, your will be different but the same format).
Give us this code so we can update also.
To all who have updated succesfull,
Could you please post your "default.prop" which is located in the root?
More specific the "ro.semc.version.sw=1236-9291" (called kit by SE).
So others can modify and update too.
ThanX in advance
Dink69
My customization code: 1242-7327_R3B
Edit: added default.prop
thanks dude.
O2 UK not yet
Thanx Jens,
Updating right now Yeaaah
GreetZ Dink
No Update for me in Germany. Maybe I will edit the build.prop to get it sooner...
can we please close this thread . there is another thread for 2.1 discussion
Confirmed!! Update released in Sweden Too!!
Could I get your build.prop file so I could update X8 to 2.1?
Has anyone managed to root theyre device yet? If not im going to see if any one has managed it on another device. maybe we can do it in a similar way
my code
1236-9291_2.0.1.a.0.47
You can flash using Bin4Ry's flash tool.
I used non-gui one, works to flash 1.6->2.1->1.6
These are the files you need to flash the 2.1 :
Loader
Firmware X8 2.1-rus
Instructions :
Get Bin4ry's flasher here :
Flasher for SE
Unpack it somewhere lets say C:\x8-flash
Replace the bat script.
unpack firmware .sin files into folder firmware inside the x8-flash
Put the loader.sin in the same place.
Start the bat script.
dink69 said:
Thanx Jens,
Updating right now Yeaaah
GreetZ Dink
Click to expand...
Click to collapse
Hi dink69, could you give details on how can I make use of Jens custom code and default prop so I can update my x8? can I just replace my default.prop with Jen's? thanks
NVM...found it on other thread
pulpoff2 said:
You can flash using Bin4Ry's flash tool.
I used non-gui one, works to flash 1.6->2.1->1.6
These are the files you need to flash the 2.1 :
Loader
Firmware X8 2.1-rus
Instructions :
Get Bin4ry's flasher here :
Flasher for SE
Unpack it somewhere lets say C:\x8-flash
Replace the bat script.
unpack firmware .sin files into folder firmware inside the x8-flash
Put the loader.sin in the same place.
Start the bat script.
Click to expand...
Click to collapse
hi please help me tanks
I had to edit my build.prop to get an update
Hye guys.
This is not created or modded by me.
I post it here because i think it is very usefull.
doomed151 said:
QuikIMG
A small tool I made to flash .img files through fastboot easily and quickly, without the need to type in commands manually. Originally I only made it for personal use but I decided to release it here. Someone might find this useful.
Q: FlashTool has this feature. Why bother?
A: Just because I can. Use whichever you prefer.
Screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Requirements
Unlocked bootloader.
A USB cable.
Fastboot already working.
Windows.
Release Notes
0.2 beta (22 Mar)
List is refreshable.
MD5 hash of selected file.
Ability to boot (without flashing) a kernel.
UI changes.
0.1 beta (17 Mar)
Initial release.
Downloads
QuikIMG-0.2-beta.zip (1.66 MB)
Instructions
Extract the contents anywhere you like.
Place .img files inside /QuikIMG/images.
Start QuikIMG.
Choose .img file.
Choose desired partition.
Click "Flash"
Wait for it to flash and then you're done.
Known Issues
Shell output doesn't update in real time. Seems to be an issue with fastboot.exe.
File filtering currently not implemented. You can put any file in the "images" folder and have fastboot flash it. Please be careful.
Planned Features
Ability to individually flash an .img file anywhere on your PC.
Configurable images directory.
Disclaimer
This beta software is to be used only by advanced users who know what they're doing. I hold no responsibility for damaged/bricked/exploded devices. I do not own the included md5sums executable as it is only used to complete a feature in the software.
If you have any suggestions or found a bug, post it here and I'll see what I can do. Hit 'Thanks' if this tool helped you.
Click to expand...
Click to collapse
Here are link to it: QuikIMG-0.2-beta.zip
Don't forget to thanks doomed151.
Thanks for posting i think i will try it out
Why not Flashtool ?
adridu59 said:
Why not Flashtool ?
Click to expand...
Click to collapse
I preffer CMD
Then you know and see what your doing
adridu59 said:
Why not Flashtool ?
Click to expand...
Click to collapse
dude..you know how to run the flashtool on linux? im on fedora 16..and cant run it properly
adridu59 said:
Why not Flashtool ?
Click to expand...
Click to collapse
Have you read entire first post?
missed this part:
Q: FlashTool has this feature. Why bother?
A: Just because I can. Use whichever you prefer.
people are learning coding, then they do some tools just for fun, just because they can, and then they share it
chacho_2me said:
dude..you know how to run the flashtool on linux? im on fedora 16..and cant run it properly
Click to expand...
Click to collapse
You already asked it in flashtool thread, this thread is not about flashtool.
You can go here: http://forum.xda-developers.com/showthread.php?t=920746
hahaha..i posted on flashtool thread on our NEO forums
0.2 beta released!!
sent from my I-Scream
Introduction:
You can use NSS:
http://forum.xda-developers.com/show....php?t=1620629
or via normal flashing with Nokia Care Suite:
http://forum.xda-developers.com/show...p?t=1599401(Q: I've got a Lumia 710 how can I downgrade my bootloader to the Qualcomm one?)
to downgrade OSBL of 710, and then use this tool for install a custom rom!
The function is similar as dd and the newest version of NSS:
http://forum.xda-developers.com/show...6&postcount=11
the different is this tools can skip your DPP and USP partition when install a custom rom, so that your KEY will not be overwrite by the custom rom file
Usage:
1, Unlock the OSBL of Nokia Lumia 710
2, Enter OSBL mode(WARNING: If you get Format Disk message in Windows - always click Cancel !!!)
2.1, Power off the phone & Remove the USB cable
2.2, Press and hold the Vol+ button
2.3, Plug the USB cable, wait for the buzz, Release the Vol+ button
3, Run this tool as administrator user
Download:
New:
View attachment downloader_lumia_v20120606.zip
Old:
View attachment downloader_lumia_v20120520.zip
It's Great！
GREAT! Thank you very much!
BTW, could you be more specific about this: Unlock the OSBL of Nokia Lumia 710?
thuanngotau said:
GREAT! Thank you very much!
BTW, could you be more specific about this: Unlock the OSBL of Nokia Lumia 710?
Click to expand...
Click to collapse
I'm guessing it means "Operating System Boot Loader"
As the QC one is already unlocked, I assume this must be for the DLOAD one ?
Hi Dewe,
Is It possible use this software, for install a custom rom? If yes, how?
And if yes, It's possible to have a complete guide (for example, I downloaded a rainbow rom, and then...)
Sorry if I don't understand very well this product function
Thanks for your help
Railas
great software !
many thanks
thuanngotau said:
GREAT! Thank you very much!
BTW, could you be more specific about this: Unlock the OSBL of Nokia Lumia 710?
Click to expand...
Click to collapse
You can use NSS:
http://forum.xda-developers.com/showthread.php?t=1620629
or via normal flashing with Nokia Care Suite:
http://forum.xda-developers.com/showthread.php?t=1599401(Q: I've got a Lumia 710 how can I downgrade my bootloader to the Qualcomm one?)
to downgrade OSBL of 710, and then use this tool for install a custom rom!
The function is similar as dd and the newest version of NSS:
http://forum.xda-developers.com/showpost.php?p=25618426&postcount=11
the different is this tools can skip your DPP and USP partition when install a custom rom, so that your KEY will not be overwrite by the custom rom file
*Detection* said:
I'm guessing it means "Operating System Boot Loader"
As the QC one is already unlocked, I assume this must be for the DLOAD one ?
Click to expand...
Click to collapse
No, this tool is for Qualcomm loader.
If you already have a qualcomm loader, just skip the step 1
Railas said:
Hi Dewe,
Is It possible use this software, for install a custom rom? If yes, how?
And if yes, It's possible to have a complete guide (for example, I downloaded a rainbow rom, and then...)
Sorry if I don't understand very well this product function
Thanks for your help
Railas
Click to expand...
Click to collapse
Yes it is used for install custom roms
Sorry there is no detailed description. you can read more posts newly added at the first post.
I just flashed my L710 with success first time on W7 x64 Well done.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
And simple video tutorial...
http://www.youtube.com/watch?v=8KdUd75HjXc
Thanks Dewe, I've tried your software, and It's work great!
dewe said:
Yes it is used for install custom roms
Sorry there is no detailed description. you can read more posts newly added at the first post.
Click to expand...
Click to collapse
so if windows asks to format means is the bootloader unlocked
Sent from my GT-I9001 using xda premium
shubham412302 said:
so if windows asks to format means is the bootloader unlocked
Sent from my GT-I9001 using xda premium
Click to expand...
Click to collapse
Yes, and do NOT format it!
What changes you made for new version?
ROM
I was just trying to use this tool but i'm stack as i dont know what type of file does it read when it asked for ROM, i do have the ROM i want but it does not recognize it as a ROM. inside the ROM folder witch file do i select ? Thanks
custom ROM is only one file *.nb
Application worked for me, thanks
So whats wrong now, my lumia wont start up? I HAVENT FORMAT IT! I use this tool to download rainbowmod, and i think everything went right, but now my phone wont start up. When i connect usb it ask me to format, i ofcourse press cancel for that. Is there something what i missed or do i have to remove battery or what can i do??
ValluViltteri said:
So whats wrong now, my lumia wont start up? I HAVENT FORMAT IT! I use this tool to download rainbowmod, and i think everything went right, but now my phone wont start up. When i connect usb it ask me to format, i ofcourse press cancel for that. Is there something what i missed or do i have to remove battery or what can i do??
Click to expand...
Click to collapse
You should hard reset yout phone. Press and hold the Volume Down, Power and Camera buttons at the same time.
His Thread:http://forum.xda-developers.com/showthread.php?t=1665821
Change History:
20120919
v0.5
Support Lumia 800 flashing custom ROM
Thank you my friend dewe!
Usage:
1, Unlock the OSBL of Nokia Lumia 710 or Nokia Lumia 800
2, Enter OSBL mode(WARNING: If you get Format Disk message in Windows - always click Cancel !!!)
2.1, Power off the phone & Remove the USB cable
2.2, Press and hold the Vol+ button
2.3, Plug the USB cable, wait for the buzz, Release the Vol+ button
3, Run this tool as administrator user
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
wtf ? he already has a thread, spam much ?
*Detection* said:
wtf ? he already has a thread, spam much ?
Click to expand...
Click to collapse
If I'm right, this one is the real dev of the application and come here with his new version
Dark_Balor said:
If I'm right, this one is the real dev of the application and come here with his new version
Click to expand...
Click to collapse
Doesn't look like it, could be wrong though
---
His Thread:http://forum.xda-developers.com/show....php?t=1665821
Change History:
20120919
v0.5
Support Lumia 800 flashing custom ROM
Thank you my friend dewe!
*Detection* said:
Doesn't look like it, could be wrong though
---
His Thread:http://forum.xda-developers.com/show....php?t=1665821
Change History:
20120919
v0.5
Support Lumia 800 flashing custom ROM
Thank you my friend dewe!
Click to expand...
Click to collapse
i have nokia DLOAD can i use it to flash custom rom?
shravanchoudhary9 said:
i have nokia DLOAD can i use it to flash custom rom?
Click to expand...
Click to collapse
You need to flash Qaulcomm bootloader first, pretty easy to do.
dewe very busy! So, he asked me release this.
But,i did't edit his Thread.i make a new thread.if this wrong,Please delet it.
Sorry for my bad english!
BigD18t said:
You need to flash Qaulcomm bootloader first, pretty easy to do.
Click to expand...
Click to collapse
thanks BigD18t,
could you please guide me or refer me a link to thread where i can see how to have qualcomm boot loader and vice verse. thanks again.
*Detection* said:
wtf ? he already has a thread, spam much ?
Click to expand...
Click to collapse
shravanchoudhary9 said:
thanks BigD18t,
could you please guide me or refer me a link to thread where i can see how to have qualcomm boot loader and vice verse. thanks again.
Click to expand...
Click to collapse
This one is perfect : http://forum.xda-developers.com/showthread.php?t=1721355
Only follow the A part, for the B part use this tool (Lumia Downloader)
Dark_Balor said:
This one is perfect : http://forum.xda-developers.com/showthread.php?t=1721355
Only follow the A part, for the B part use this tool (Lumia Downloader)
Click to expand...
Click to collapse
okay thanks, got every thing.
just last question if i want to go back to DLOAD (to make it in factory condition so service center can accept it) then what need to do?
any thread for that?
shravanchoudhary9 said:
okay thanks, got every thing.
just last question if i want to go back to DLOAD (to make it in factory condition so service center can accept it) then what need to do?
any thread for that?
Click to expand...
Click to collapse
By default NSS is saving the Nokia DLOAD when you are replacing it by the QLOAD. You have a restore button that make you go back.
Never tried, but should work. (Since it doing exactly the same operation (rewrite the bootloader) with another one).
Don't forget it's ONLY for Nokia Lumia 710.
As explained in the guide :
For an 800, only a device showing up as Qualcomm can be unlocked.
A DLOAD in 800 cannot be unlocked as yet.
Click to expand...
Click to collapse
Dark_Balor said:
By default NSS is saving the Nokia DLOAD when you are replacing it by the QLOAD. You have a restore button that make you go back.
Never tried, but should work. (Since it doing exactly the same operation (rewrite the bootloader) with another one).
Don't forget it's ONLY for Nokia Lumia 710.
As explained in the guide :
Click to expand...
Click to collapse
i tried as you said, but its stuck at sending data file ... failed and then it restarted as normal.
as i have hardware version 2.4 i cant unlock it yet.
Do you think we will be able to unlock soon Lumia 800 DLOAD? Why is so Hard do that?.....i Love My Lumia 800, but i want it Free.
Thx.
Sent from my Lumia 800 using Board Express
Sorry for not replying, and thanks Dark_balor.
I have an android managed device with mt8163v chipset. It's from a big company, and it's custom built so there is no brand name or model. It has a slimmed down settings menu, and is highly restricted, so I'm unable to turn on USB debugging.
The hardware is decent and I'd like to be able to use the tablet...
Downloading apps to the device for rooting etc.. is not an option. It's not connected to the internet or any provider.
I have successfully got the device to talk with sp flash tool. I downloaded the scatter file from here
However, after about 45 seconds I keep getting the error S_FT_ENABLE_DRAM_FAIL (4032)
My guess is that the scatter file is incompatible with the device? I just want to completely flash the firmware, I don't need to keep anything on the device currently. Does anyone know how I may be able to create a scatter file without usb debugging enabled?
Or ANY other solution that may allow me to get past this brick wall??? Thanks!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
My guess is this error is because PRELOADER inside flash that you want to flash is not compatible with your phone.
Solution = Download correct firmware
jwoegerbauer said:
My guess is this error is because PRELOADER inside flash that you want to flash is not compatible with your phone.
Solution = Download correct firmware
Click to expand...
Click to collapse
Would you mind elaborating? I'm a bit new to this realm of tech. When you say the "Preloader inside flash" that I want to flash, what exactly are you referring to? The scatter file? Because there's only two options in sp flash tools that I'm aware of:
1.) Download-agent
2.) Scatter-loading File
Are you referring to either of these?
Also, when you say "download correct firmware" are you referring to the scatter file as well?
And please note that as I mentioned in OP, this device doesn't have a brand. It is custom built for a company to be secure. They only used it for in-house stuff and updated it via a company kiosk. Therefor, I can't just download firmware etc from any manufacturer.
Is there any generic/stock firmware for this chipset that will just override whatever is already there?
If there is any way for me beat this thing, please point me in any direction that may be helpful.
I have considering connecting via UART, as I can clearly see exposed uart pins on the board. Any other ideas greatly appreciate as to where I should move from here.
tr0ubleman said:
Would you mind elaborating? I'm a bit new to this realm of tech. When you say the "Preloader inside flash" that I want to flash, what exactly are you referring to?
Click to expand...
Click to collapse
What the PRELOADER on MediaTek chipset based devices is is explained here.
jwoegerbauer said:
What the PRELOADER on MediaTek chipset based devices is is explained here.
Click to expand...
Click to collapse
Okay thanks, interesting read. So, I guess what I need is to be able to extract the firmware that is already on the device, and hence creating a new scatter file? The problem with this is that I can't seem to find a method for doing this without enabling usb debugging, which I'm unable to do.
Are there any drivers / methods that would allow me to communicate with the device using adb / fastboot that don't require usb debugging to be enabled?
Also, is it possible that firmware for some other device that uses this chipset may work? If so, I'll start downloading all the mt8163v firmware I can find and see if any versions work... Thanks again.
You may try this method to root your phone and if it was successful you make the relevant changes to Android's system file named buid.prop.
jwoegerbauer said:
You may try this method to root your phone and if it was successful you make the relevant changes to Android's system file named buid.prop.
Click to expand...
Click to collapse
Can't install apps on the device.... That's kinda part of the premise of this whole thing.