Hi all.
Is there any way to know to which network my HD2 is locked?
I am unable to update my ROM as htc website shows the message "Sorry, this software download is not suitable for your device." when i enter my serial number.
I bought this phone from a reputed electronics store in UAE and is using my old ordinary SIM.
The present ROM is 1.43.421.1 (70315) WWE.
HTC support told me to install "Update for HTC HD2 System Stability" from their website but the process stops at 4 % and an "ERROR[294] INVALID VENDER ID" appears on PC.
What to do now?How to know my existing ROM vendor?
Thank u all...
Solved ! (thanks to xda n mskip)
I have solved the problem and successfully updated the ROM to 1.66 !
Heres how:
I saw "ICASA" at the back of phone as i removed the battery...googled....and found out that its a South Africa ROM !
Google lead me to this helpful info:http://www.htchd2forum.com/htc-hd2-software-updates/south-african-shipped-1-66-rom-upgrade/
Then i read "Flashing your First Rom For Noobs"http://forum.xda-developers.com/showthread.php?t=609477
and downloaded ROM update from http://www.4shared.com/dir/22189940/b8552fa0/Shipped_Leo_ROMs.html
[RUU_Leo_HTC_WWE-AFK_1.66.421.1_Radio_15.32.50.07U_2.07.51.22_2_Signed_LEO_Ship]
Installed the ROM after hspl
Big thanks to xda,mskip & BarrySumpter
Hope my call bugs are gone with this....shall update
Dear forum members,
Due to the status of current development, i hope good news for all, the thread will be re-designed.
Regards, ansar.
Post #2 reserved for future use.
Post #3 reserved for future use.
Post #4 reserved for future use.
thanks for the rom ansar. before i try the roms, im on
firmware: 2250.09.10307.502
radio: 5.51.09.06_22.30.50.09h
currently using surround on t-mobile, will this sim-lock phone? also, cingular rom is just at&t version correct? i want to try the unbranded rom and was just wondering about compatibilty beteween the roms. thanks.
halojinx said:
thanks for the rom ansar. before i try the roms, im on
firmware: 2250.09.10307.502
radio: 5.51.09.06_22.30.50.09h
currently using surround on t-mobile, will this sim-lock phone? also, cingular rom is just at&t version correct? i want to try the unbranded rom and was just wondering about compatibilty beteween the roms. thanks.
Click to expand...
Click to collapse
Hi,
None ROM will sim lock the phone.
You can upgrade the Radio with 1.2 URR and come back to intiial 1.x BRR
Regards, ansar.
ansar this software is not working in my hc surround, i got with the demo mode and flashed this rom but nothing changes, after a few minutes it goes back to demo mode.
i had a hd7 and it was on demo mode i flashed one of your roms and is fine now, why is not working in my surround?
elmanortega said:
ansar this software is not working in my hc surround, i got with the demo mode and flashed this rom but nothing changes, after a few minutes it goes back to demo mode.
i had a hd7 and it was on demo mode i flashed one of your roms and is fine now, why is not working in my surround?
Click to expand...
Click to collapse
Hi,
See my reply in branded rom thread.
Regards, ansar.
I successfully flashed my htc surround with a cingulare rom of yours, the branded one. Am I able to flash your unbranded rom? and as far as radio goes, i dont get exactly how i am spose to pick which radio.
and would it still be sim-locked, or does debranding it remove the ATT sim locking
I do not understand ... Since I realize that I can install the rom? I obviously do not want to change the 3G bands (850 to AT & T).
That dirferencias there between them?
What languages do they bring? to choose after flashed ...
PERFECT
dolike this
hard reset
before the at&t shows
take the battery out
put battery back in and turn on in bootloader mode
flash cingular rom
done
no more demo mode
flashin new software will not change the 3g bands
and will not lock your cell
elmanortega said:
dolike this
hard reset
before the at&t shows
take the battery out
put battery back in and turn on in bootloader mode
flash cingular rom
done
no more demo mode
flashin new software will not change the 3g bands
and will not lock your cell
Click to expand...
Click to collapse
languages screen that includes the rom will you install?
Could be fixed?
1-Open Regional and Language Options by clicking the Start button , clicking Control Panel, clicking Clock, Language, and Region, and then clicking Regional and Language Options.
2-Click the Keyboards and Languages tab.
Thanks
sidicious said:
I successfully flashed my htc surround with a cingulare rom of yours, the branded one. Am I able to flash your unbranded rom? and as far as radio goes, i dont get exactly how i am spose to pick which radio.
and would it still be sim-locked, or does debranding it remove the ATT sim locking
Click to expand...
Click to collapse
Hi,
You can flash the radio with the 1.2 ROM in #1 post.
Also you can return to the one you have now with the 1.x ROM.
No, ROM flashing does not sim lock a phone and do not unlock it either.
To sim unlock your phone you need an unlock code that could be provided by your operator.
Regards, ansar.
AT&T Surround Flashing problem
@ansar,
bro i got error 226 while upgrading and now iam stuck at bootloader mode. please help. May be you can upload to another source/mirror.
thanks
manee said:
@ansar,
bro i got error 226 while upgrading and now iam stuck at bootloader mode. please help. May be you can upload to another source/mirror.
thanks
Click to expand...
Click to collapse
Hi,
With the info you posted it not possible to help you.
You must describe in detail:
1. Your phone settings>about Firmware version
2. The operator you are branded, Cingular_US or TELUS and
3. The ROM version you tried to flash.
Regards, ansar.
Dear ansar,
I have cingular surround on first official firmware,
i tried to flash 1.2 which u specified to another person.
I got error 226 on one laptop and it gets stuck on 98% on other. I tried to flash all cingular rom to get it back to work but the full branded version get stuck on 11%.
The branded ROMs specified by you as well the official ROM available in this forum, the official ROM gets stuck at 9%
Please help , iam stuck
PD26100 SS-BC (4K)
SPL-1.3.22500.7(111288)
MicroP(LED) 0x09
TOUCH C1(v69)
SD SANDISK 15193MB Class0
OS Version 7.0.7004.0
Firmware revision number 2250.09.10307.502
Hardware revision number 0003
Radio software version 5.51.09.06_22.30.50.09H
Radio hardware version A.26.0.D4
Bootloader 1.3.2250.7(111288)
Chip SOC version: 2.2.5.0
manee said:
Dear ansar,
I have cingular surround on first official firmware,
i tried to flash 1.2 which u specified to another person.
I got error 226 on one laptop and it gets stuck on 98% on other. I tried to flash all cingular rom to get it back to work but the full branded version get stuck on 11%.
The branded ROMs specified by you as well the official ROM available in this forum, the official ROM gets stuck at 9%
Please help , iam stuck
PD26100 SS-BC (4K)
SPL-1.3.22500.7(111288)
MicroP(LED) 0x09
TOUCH C1(v69)
SD SANDISK 15193MB Class0
OS Version 7.0.7004.0
Firmware revision number 2250.09.10307.502
Hardware revision number 0003
Radio software version 5.51.09.06_22.30.50.09H
Radio hardware version A.26.0.D4
Bootloader 1.3.2250.7(111288)
Chip SOC version: 2.2.5.0
Click to expand...
Click to collapse
Hi,
[I got error 226 on one laptop and it gets stuck on 98% on other]
[the official ROM gets stuck at 9%]
At 9% or 11% and at 98% of flashing there is usually a delay and it gives the impression that is stopped, but it is not.
In no case you must disconnect the usb cable from phone but must let the flashing operation to complete.
I hope you did not already make a hardware flashing damage to the phone.
Try again to flash the full branded version and let it to complete.
Use a laptop with Vista or 7.
Sometimes it helps to remove the battery for some minutes, replace it and enter bootloader.
Regards, ansar.
bro every time, when it get stuck the rom update utility shows error . The phone automatically restarts and get back to the bootloader mode. I understand what do u wanted to say, i personally have flash numerous apple, android and windows phones, this is the first time whenever ROM update utility shows error and the phone restarts to origonal bootloader state. Iam stuck. Cursing myself, my phone , a new one it was shutdown automatically after few configuration steps, so i decided to flash as i looked liked a software issue. But now iam stuck at bootloader and we cannot replace this phone since i have bought it off contract and shipped it to pakistan where i live, so no warranty claims
manee said:
bro every time, when it get stuck the rom update utility shows error . The phone automatically restarts and get back to the bootloader mode. I understand what do u wanted to say, i personally have flash numerous apple, android and windows phones, this is the first time whenever ROM update utility shows error and the phone restarts to origonal bootloader state. Iam stuck. Cursing myself, my phone , a new one it was shutdown automatically after few configuration steps, so i decided to flash as i looked liked a software issue. But now iam stuck at bootloader and we cannot replace this phone since i have bought it off contract and shipped it to pakistan where i live, so no warranty claims
Click to expand...
Click to collapse
Hi,
Since you have a 502 ROM, try to flash the Cingular ROM more than one times in series.
This means after flashing Error and from bootloader try again Cingular.
It may be need it more than twice.
Regards, ansar
I have searched everywhere but I am unable to get rid of this problem. Can anybody help me. I am getting this ERROR 300 : Invailid RUU.. Use a newer version.
Can anyone provide me newer version of RUU for HTC P3400i
compilerNayan said:
I have searched everywhere but I am unable to get rid of this problem. Can anybody help me. I am getting this ERROR 300 : Invailid RUU.. Use a newer version.
Can anyone provide me newer version of RUU for HTC P3400i
Click to expand...
Click to collapse
Here Is the RUU which i'm using without any prob.
RUU.7z
Buddy
compilerNayan said:
I have searched everywhere but I am unable to get rid of this problem. Can anybody help me. I am getting this ERROR 300 : Invailid RUU.. Use a newer version.
Can anyone provide me newer version of RUU for HTC P3400i
Click to expand...
Click to collapse
hey Buddy, You must first bring back your bricked device to life by using the process of mtty ,after the spl is patched then only you can flash a unofficial rom
If you need more info please do tell me i will tell you how to dow in a explaining way
compilerNayan said:
I have searched everywhere but I am unable to get rid of this problem. Can anybody help me. I am getting this ERROR 300 : Invailid RUU.. Use a newer version.
Can anyone provide me newer version of RUU for HTC P3400i
Click to expand...
Click to collapse
It happens only if you haven't installed active sync or windows mobile device centre.
Just bought second hand HTC Radar. Sseller sold it, because he couldn't update it, because of error 80180048.
He said he thinks the phone is developer model and it may need a firmware....and goood luck!
I can't find how to crab a screenshot on Windows phone, but there is several additional items in the menus:
TestSuite
zBig Boss Settings
zCompass
zGesture Bester
zSensorView
zSart KITL
Is there any standard (original) firmware for radar? The phone is unlocked like every HTC phone sold here in Finland. Is it wise to contact HTC, if they could help, or can I get trouble of doing that?
edit: I'm completely newbie, but I found this:
Model: HTC Radar C110e
Software : WIndows 7.5
OS Version: 8107.WM7_Main_Ship (mojobld).20111201-2014
Firmware revision number: 1600.2200.10807.401
Hardware revision number: 0002
Bootloader version: 1.8.160015.3(131865)
Chip SOC version: 1.6.0.0
try hard reset?
also see these two:
http://support.microsoft.com/kb/2530409
http://forums.create.msdn.com/forums/t/85769.aspx?PageIndex=1
File_Submit said:
try hard reset?
also see these two:
Click to expand...
Click to collapse
Thanks for the quick reply!
Yeah, I tried Hard reset. I also found that link, when trying to find help with that error number. In that help site there is a warning: DO NOT use the Windows Phone Support Tool if your phone's operating system (OS) version is 7.0.7390.0 or higher.
My phone says it has 7.5.
Do someone know how to recognise if this phone actually is a developer version?
Or maybe it has just a custom firmware?
Is there a way to recognize a custom firmware?
if i were you i would use DFT HSPL and flash a custom rom
DFT HSPL
File_Submit said:
if i were you i would use DFT HSPL and flash a custom rom
Click to expand...
Click to collapse
Many thanks. As I told I'm pretty new with this stuff, but at least thats looks promising.
By the way, I found out my phone is a developer model for sure.
I found a topic in here when doing a search using the OS version (which looks weird).
I found this:
Radar - Strange build - mojobld ?
I see..
So I presume you can skip DFT HSPL and go straight to flashing some ROM whether is stock or not.
Sent from my Radar C110e using XDA Windows Phone 7 App
In that other thread, a person with developer phone had tried to flash the phone with other firmwares without success. I would really like to get advices from the people here, before doing anything stupid.
I think i made a mistake saying that htc phones in finland are unlocked. What i mean is they are not locked (or branded) by carrier (like Vodafone, orange etc).
i think you could easily unlock the bootloader (DFT HSPL) and flash a fresh ROM, but look for other opinions just to be sure
Hello XDAers!!
I have a Lumia 710 with Lumiatrix ROM... Now I want to return it to original firmware cause I'm going to sell it to go for a Lumia 920. What steps should I follow? Can anyone help me?
just flash a stock-firmware and you are done?
I tried flashing through Nokia Care suite but it recognises the phone as Lumiatrix and doesn't carry on...And if I try to flash in recovery mode windows asks me if I want to format the device...
if u try to edid in registry version of the os , a lower version ?
.................
i'm asking the same question about lumia800 , if i flash the original "sdc3" partition ?
nonblk said:
if u try to edid in registry version of the os , a lower version ?
.................
i'm asking the same question about lumia800 , if i flash the original "sdc3" partition ?
Click to expand...
Click to collapse
How?What?
Any idea?