[Q] X10 mini Completely dead!!!Need Help!!! - Sony Ericsson XPERIA X10 Mini

Hello there,
i have been searching for hours in the net but i can't find any help!!!!!
So,here's the case:
i rooted my x10 mini so i can install custom firmware.After that i installed xrecovery via root explorer.Until here everything was working perfectly.After that i installed flashtool and unlocked the bootloader.I restarted the phone and got into recovery menu by pressing "back" several times when the 'White logo came". In recovery menu i made a factory reset and wiped cache.Then i choose to install a custom firmware from zip file but an error came "install failed" or something like that.After rebooting the phone nothing happens.The phone does not vibrate,no green light the comes,i can't go in flash mode and if i press "home and power" nothing happens and of course not detected from the pc.The phone seems to bee 100% dead!!!Is there a way to recove it??????
Please i NEEEEDD YOUR HEEEEEELPPPP!!!!!!!!!!

---

disconnect the battery and rstaret phone
Sent from my E10i using xda app-developers app

---

i have already done this but nothing happens

---

Somethings wrong. Tell me, what are you FIRST trying to achieve?
a rooted stock firmware(2.1-update1) with unlocked bootloader?
or a custom ROM working on top of a custom Kernel?

---

i firstly tryied to achieve a rooted phone with custom firmware and now i am trying to get it turn on!!!

---

petran_gr said:
i firstly tryied to achieve a rooted phone with custom firmware and now i am trying to get it turn on!!!
Click to expand...
Click to collapse
Put it on the wall-charger for an hour or so, see if something happens.

---

custom firmware? what is that? do you mean custom rom and a custom kernel. If you are trying to have one of this roms:MiniCM7/8/9,GingerDX,MiniCM7pro,ArcMiniNXT™,etc which is commonly working on top of the nAa kernel. I think you should flash the kernel first to have a CWM recovery not an Xrecovery then flash properly a ROM.

---

i can't go into flash mode,the phone does nothing!Is there another way to recover it back to stock???

---

Find/Search,google it and ask others on this forum on how you can get an Stock Firmware. It's worth 224mb. everyone should have one for this will be the back to stock restore point.
you can use it by flashing it to Flashtool. afterwards you are back on stock. not rooted, and got it's warranties back.
---------- Post added at 10:44 PM ---------- Previous post was at 10:41 PM ----------
you can go to flashmode with a trick, so you can flash your stock firmware.
power off, remove the battery. attach usb cable, hold back button, then insert the battery. It will be on flashmode. =') chiiiiiiiing. your x10mini is back.
---------- Post added at 10:47 PM ---------- Previous post was at 10:44 PM ----------
I found it.
SmG67 said:
for unlocked bootloader: download
for locked bootloader: download
They're about 210mb, although the site may indicate differently... just wait till the download is done. Put it in the firmwares folder and flash...
Click to expand...
Click to collapse

---

i tried the trick with the battery removal but it does not connect.I also put it in wallcharger for about an our but nothing happens.it is completely bricked

---

I still don't believe you are in a HARD BRICK.
I never had one. The LED doesn't turn on? It should turn green. and should be connected in flashmode.

---

no the led is also dead,
i thing it is the bootloader that bricked the phone.i read something about the week of construction but am not sure what it is.Mine is 10w22 if it's any help.

---

petran_gr said:
no the led is also dead,
i thing it is the bootloader that bricked the phone.i read something about the week of construction but am not sure what it is.Mine is 10w22 if it's any help.
Click to expand...
Click to collapse
After unlocking the bootloader you could still get into recovery, so that didn't brick your phone. Which Firmware were you trying to install when it failed?

---

SmG67 said:
After unlocking the bootloader you could still get into recovery, so that didn't brick your phone. Which Firmware were you trying to install when it failed?
Click to expand...
Click to collapse
see? base on what he said, theres nothing to cause a Hard brick on his device. He's even on to x10mini not x10mp(that has some more issues because of the flex)
---------- Post added at 11:22 PM ---------- Previous post was at 11:20 PM ----------
I really don't believe you are in HARD BRICK.
if you can only go to flashmode you can have it back. think of any way to go to flashmode. or try and try again to do what I told you to enter Flashmode. you should open the flashtool then try my trick.

---

i tried to install this rom:
http://forum.xda-developers.com/showthread.php?t=2054144

---

petran_gr said:
i tried to install this rom:
http://forum.xda-developers.com/showthread.php?t=2054144
Click to expand...
Click to collapse
ooooh the sevenbean. there should be another requirement, the CWM recovery. not the Xrecovery. things you should have done are the following:
1. Root
2. Unlock the bootloader
3. Install the nAa-JB-03 kernel
4. Enter CWM recovery
5. Full wipe(wipe data factory reset, Wipe cache, Wipe Dalvik, Format Data, Format System)
6. Flash the SevenBean Rom.

---

and what about now??is there another way to get back to stock without flash mode?For example by copying files to the sdcard??

---

I don't think there is. If only you could enter the flashmode.
PS can you enter Xrecovery?
---------- Post added at 12:11 AM ---------- Previous post was at 12:09 AM ----------
how to flash KERNEL on xperia x8/x10 mini

---

no,i can's enter xrecovery mode because it does not even turn on

---

Your only hope is entering the flashmode. can you do an offline charging?