[Q] Please look at my logcat please! - Android Q&A, Help & Troubleshooting

I am trying to port SEMC Debrand Engine to Galaxy FIt using clean CM7 as base
So far it boots and then bootloops.
Logcat:
Code:
--------- beginning of /dev/log/main
I/cm ( 112): Welcome to Android 2.3.7 / Achotjan's_SEMC-Debrand-engine_v3
I/cm ( 113): _
I/cm ( 114): __ __ _ ___ _ _ __ ___ __ _ _ _ _ __ __))
I/cm ( 115): ((_ \(/'((_( ((\( ((_)((_( (('((\( ((`1( ((_)((_(
I/cm ( 116): )) _))
I/cm ( 117):
I/DEBUG ( 151): debuggerd: Jan 1 2013 02:59:43
--------- beginning of /dev/log/system
I/Vold ( 149): Vold 2.1 (the revenge) firing up
I/Netd ( 150): Netd 1.0 starting
D/Vold ( 149): Volume sdcard state changing -1 (Initializing) -> 0 (No-Media)
D/Vold ( 149): Volume sdcard state changing 0 (No-Media) -> 2 (Pending)
D/Vold ( 149): Volume sdcard state changing 2 (Pending) -> 1 (Idle-Unmounted)
D/AndroidRuntime( 153):
D/AndroidRuntime( 153): >>>>>> AndroidRuntime START com.android.internal.os.ZygoteInit <<<<<<
I/AndroidRuntime( 153): Heap size: -Xmx32m
D/AndroidRuntime( 153): CheckJNI is OFF
I/ ( 154): ServiceManager: 0xad50
I/AudioHardwareMSM72XX( 154): get_audpp_filter
I/AudioHardwareMSM72XX( 154): open /system/etc/AudioFilter.csv success.
I/AudioHardwareMSM72XX( 154): EQ flag = 00.
I/AudioHardwareMSM72XX( 154): EQ flag = 00.
I/AudioHardwareMSM72XX( 154): EQ flag = 00.
D/AudioHardwareInterface( 154): setMode(NORMAL)
I/AudioHardwareMSM72XX( 154): Set master volume to 7.
I/QualcommCameraHardware( 154): getCameraInfo: IN
I/QualcommCameraHardware( 154): getCameraInfo: loading libqcamera at 0xb000e0e8
I/QualcommCameraHardware( 154): getCameraInfo: numOfCameras = 1
I/QualcommCameraHardware( 154): Camera sensor 0 info:
I/QualcommCameraHardware( 154): camera_id: 0
I/QualcommCameraHardware( 154): modes_supported: 1
I/QualcommCameraHardware( 154): position: 0
I/QualcommCameraHardware( 154): sensor_mount_angle: 90
V/QualcommCameraHardware( 154): getCameraInfo: dlclose(libqcamera)
I/QualcommCameraHardware( 154): getCameraInfo: OUT
D/AudioFlinger( 154): setParameters(): io 1, keyvalue routing=2, tid 216, calling tid 154
I/AudioFlinger( 154): AudioFlinger's thread 0xcc68 ready to run
I/AudioHardwareMSM72XX( 154): Routing audio to Speakerphone
D/AudioHardwareMSM72XX( 154): doAudioRouteOrMute() device 6, mMode 0, mMicMute 1, mBuiltinMicSelected 0, muted
I/AudioHardwareMSM72XX( 154): Routing audio to Speakerphone
D/AudioHardwareMSM72XX( 154): setVoiceVolume(1.000000)
I/AudioHardwareMSM72XX( 154): Setting in-call volume to 7 (available range is 0 to 7)
I/SamplingProfilerIntegration( 153): Profiler is disabled.
I/Zygote ( 153): Preloading classes...
E/Zygote ( 153): setreuid() failed. errno: 2
D/dalvikvm( 153): GC_EXPLICIT freed 48K, 77% free 239K/1024K, external 0K/0K, paused 4ms
I/bluetooth_ScoSocket.cpp( 153): Entry name = MY-CAR ScoTypes = 0x7f
I/bluetooth_ScoSocket.cpp( 153): Entry name = Motorola HF850 ScoTypes = 0x7
D/szipinf ( 153): Initializing inflate state
D/dalvikvm( 153): GC_FOR_MALLOC freed 2914K, 57% free 2209K/5123K, external 0K/0K, paused 75ms
D/dalvikvm( 153): GC_FOR_MALLOC freed 2634K, 52% free 2485K/5123K, external 0K/0K, paused 68ms
I/Zygote ( 153): ...preloaded 1829 classes in 5841ms.
D/Zygote ( 153): setreuid() error ignored, same uid.
D/dalvikvm( 153): GC_EXPLICIT freed 887K, 48% free 2685K/5123K, external 0K/0K, paused 55ms
I/Zygote ( 153): Preload resources disabled, skipped.
D/dalvikvm( 153): GC_EXPLICIT freed 25K, 49% free 2660K/5123K, external 0K/0K, paused 45ms
D/dalvikvm( 153): GC_EXPLICIT freed <1K, 49% free 2660K/5123K, external 0K/0K, paused 44ms
D/dalvikvm( 153): GC_EXPLICIT freed <1K, 49% free 2660K/5123K, external 0K/0K, paused 44ms
I/dalvikvm( 153): System server process 254 has been created
I/Zygote ( 153): Accepting command socket connections
I/sysproc ( 254): Entered system_init()
I/sysproc ( 254): ServiceManager: 0xbed50
I/SurfaceFlinger( 254): SurfaceFlinger is starting
I/SurfaceFlinger( 254): dithering enabled
I/SurfaceFlinger( 254): SurfaceFlinger's main thread ready to run. Initializing graphics H/W...
E/SurfaceFlinger( 254): Couldn't open /sys/power/wait_for_fb_sleep or /sys/power/wait_for_fb_wake
I/msm7k.gralloc( 254): using (fd=27)
I/msm7k.gralloc( 254): id = msmfb30_30001
I/msm7k.gralloc( 254): xres = 240 px
I/msm7k.gralloc( 254): yres = 320 px
I/msm7k.gralloc( 254): xres_virtual = 240 px
I/msm7k.gralloc( 254): yres_virtual = 640 px
I/msm7k.gralloc( 254): bpp = 32
I/msm7k.gralloc( 254): r = 24:8
I/msm7k.gralloc( 254): g = 16:8
I/msm7k.gralloc( 254): b = 8:8
I/msm7k.gralloc( 254): width = 38 mm (160.421051 dpi)
I/msm7k.gralloc( 254): height = 51 mm (159.372543 dpi)
I/msm7k.gralloc( 254): refresh rate = 1.34 Hz
D/libEGL ( 254): loaded /system/lib/egl/libGLES_android.so
D/libEGL ( 254): loaded /system/lib/egl/libEGL_adreno200.so
D/libEGL ( 254): loaded /system/lib/egl/libGLESv1_CM_adreno200.so
D/libEGL ( 254): loaded /system/lib/egl/libGLESv2_adreno200.so
E/libEGL ( 254): eglSetSwapRectangleANDROID:1909 error 3008 (EGL_BAD_DISPLAY)
I/SurfaceFlinger( 254): EGL informations:
I/SurfaceFlinger( 254): # of configs : 35
I/SurfaceFlinger( 254): vendor : Android
I/SurfaceFlinger( 254): version : 1.4 Android META-EGL
I/SurfaceFlinger( 254): extensions: EGL_KHR_image EGL_KHR_image_base EGL_KHR_image_pixmap EGL_KHR_gl_texture_2D_image EGL_KHR_gl_texture_cubemap_image EGL_KHR_gl_renderbuffer_image EGL_ANDROID_image_native_buffer EGL_ANDROID_swap_rectangle EGL_ANDROID_get_render_buffer
I/SurfaceFlinger( 254): Client API: OpenGL ES
I/SurfaceFlinger( 254): EGLSurface: 8-8-8-8, config=0x3
I/SurfaceFlinger( 254): OpenGL informations:
I/SurfaceFlinger( 254): vendor : Qualcomm
I/SurfaceFlinger( 254): renderer : Adreno (TM) 200
I/SurfaceFlinger( 254): version : OpenGL ES-CM 1.1
I/SurfaceFlinger( 254): extensions: GL_AMD_compressed_ATC_texture GL_AMD_performance_monitor GL_APPLE_texture_2D_limited_npot GL_EXT_texture_filter_anisotropic GL_EXT_texture_format_BGRA8888 GL_EXT_texture_type_2_10_10_10_REV GL_OES_blend_equation_separate GL_OES_blend_func_separate GL_OES_blend_subtract GL_OES_compressed_ETC1_RGB8_texture GL_OES_compressed_paletted_texture GL_OES_depth_texture GL_OES_draw_texture GL_OES_EGL_image GL_OES_EGL_image_external GL_OES_framebuffer_object GL_OES_matrix_palette GL_OES_packed_depth_stencil GL_OES_point_size_array GL_OES_point_sprite GL_OES_read_format GL_OES_rgb8_rgba8 GL_OES_stencil_wrap GL_OES_texture_cube_map GL_OES_texture_env_crossbar GL_OES_texture_float GL_OES_texture_half_float GL_OES_texture_half_float_linear GL_OES_texture_npot GL_OES_texture_mirrored_repeat GL_QCOM_binning_control GL_QCOM_extended_get GL_QCOM_tiled_rendering GL_AMD_compressed_3DC_texture
I/SurfaceFlinger( 254): GL_MAX_TEXTURE_SIZE = 4096
I/SurfaceFlinger( 254): GL_MAX_VIEWPORT_DIMS = 4096
I/SurfaceFlinger( 254): flags = 00000000
D/SensorService( 254): nuSensorService starting...
E/bdaddr ( 271): Error reading /data/.nvmac_bt.info (unexpected size 18)
E/SensorHAL( 254): __poll_init
E/SensorHAL( 254): +__poll_activate: handle=0 enabled=0
E/SensorHAL( 254): +__poll_activate: handle=1 enabled=0
E/SensorHAL( 254): +__poll_activate: handle=2 enabled=0
E/SensorHAL( 254): +__poll_activate: handle=3 enabled=0
I/SensorService( 254): BMA220
I/SensorService( 254): MMC314X
I/SensorService( 254): Mag & Acc Combo Orientation Sensor
I/SensorService( 254): TAOS
I/sysproc ( 254): System server: starting Android runtime.
I/sysproc ( 254): System server: starting Android services.
I/SystemServer( 254): Entered the Android system server!
D/SensorService( 254): nuSensorService thread starting...
I/sysproc ( 254): System server: entering thread pool.
I/SystemServer( 254): Entropy Service
I/SystemServer( 254): Power Manager
I/SystemServer( 254): Activity Manager
I/ActivityManager( 254): Memory class: 32
D/libEGL ( 270): loaded /system/lib/egl/libGLES_android.so
D/libEGL ( 270): loaded /system/lib/egl/libEGL_adreno200.so
W/UsageStats( 254): Usage stats version changed; dropping
D/libEGL ( 270): loaded /system/lib/egl/libGLESv1_CM_adreno200.so
D/libEGL ( 270): loaded /system/lib/egl/libGLESv2_adreno200.so
E/SurfaceFlinger( 254): eglSwapBuffers: EGL error 0x3008 (EGL_BAD_DISPLAY)
W/zipro ( 270): Unable to open zip '/data/local/bootanimation.zip': No such file or directory
HELP ME PLEASE!
PS. Full logcat http://pastebin.com/wxcMd6Nz
Thanx in Advance!

Logcat shows lot of Sony Ericsson specific libraries and files are missing and because of the dependency, it's throwing error and restarting framework again and again. Why are you trying to use something Sony Ericsson on a Samsung phone?

ivoidwarranty said:
Logcat shows lot of Sony Ericsson specific libraries and files are missing and because of the dependency, it's throwing error and restarting framework again and again. Why are you trying to use something Sony Ericsson on a Samsung phone?
Click to expand...
Click to collapse
Here it is running on Galaxy Y:
http://forum.xda-developers.com/showthread.php?t=1979146
and
Here is original thread (It is CM7, modded to run SE files)
http://forum.xda-developers.com/showthread.php?t=1504633

Related

Major issues randomly started today, please help!

So everything was running fine today with Faux's oc kernel and ics cm7 but then my phone suddenly started rebooting constantly. I tried doing a full reset to some success, with only occasional reboots but it broke my wifi. Now I tried installing neutrino's GT rom and have been getting reboots and no wifi. Does anyone know what I can do to fix the reboots and my wifi access? When I try to turn on wifi it just says error, maybe a radio issue? My market app also no longer launches. Any help would be greatly appreciated, I love this phone and would love to fix the problem.
I've got the phone working relatively well now with one notable exception, wifi and bluetooth do not work. When I try to turn on bluetooth it just doesnt turn on and when I try to turn on wifi it just says "error". Below is a logcat.
Code:
D/dalvikvm( 2584): GC_EXTERNAL_ALLOC freed 106K, 48% free 2805K/5379K, external
0K/0K, paused 31ms
D/ViewConsistency( 2584): AbsListView [email protected] enabled=
false
D/ViewConsistency( 2584): AbsListView [email protected] enabled=
false
D/dalvikvm( 2584): GC_EXTERNAL_ALLOC freed 20K, 48% free 2835K/5379K, external 5
13K/519K, paused 22ms
I/ActivityManager( 1612): Displayed com.android.settings/.Settings: +379ms
I/ggheart ( 1998): onStop
I/ ( 1547): odm_disp_cabc_thread running
I/ ( 1547): odm_disp_cabc_thread is restarting err_cnt=4
I/ActivityManager( 1612): Starting: Intent { act=android.intent.action.MAIN cmp=
com.android.settings/.WirelessSettings } from pid 2584
D/ViewConsistency( 2584): AbsListView [email protected] enabled=
false
D/ViewConsistency( 2584): AbsListView [email protected] enabled=
false
V/NFC ( 2584): this device does not have NFC support
I/ActivityManager( 1612): Displayed com.android.settings/.WirelessSettings: +317
ms
D/ ( 1547): nvrm_daemon: rt_exist from client: 1
D/ ( 1547): rt_exist=1, add client ref
D/ ( 1547): nvrm_daemon: rt_exist to client: 1
D/ ( 1547): NVRM_DAEMON(1011): master_dispatch_thread() running
I/WindowManager( 1612): Setting rotation to 1, animFlags=0
I/ActivityManager( 1612): Config changed: { scale=1.0 imsi=310/410 loc=en_US tou
ch=3 keys=1/1/2 nav=1/2 orien=2 layout=268435490 uiMode=17 seq=5 themeResource=n
ull}
I/nvrm_daemon( 1538): nvrm_daemon: rt_exist from client: 1
I/nvrm_daemon( 1538): rt_exist=1, add client ref
I/nvrm_daemon( 1538): nvrm_daemon: rt_exist to client: 1
I/nvrm_daemon( 1538): NVRM_DAEMON(1011): master_dispatch_thread() running
D/dalvikvm( 1707): GC_EXTERNAL_ALLOC freed 278K, 50% free 2961K/5895K, external
628K/1132K, paused 46ms
D/ViewConsistency( 2584): AbsListView [email protected] enabled=
false
D/ViewConsistency( 2584): AbsListView [email protected] enabled=
false
I/PowerWidget( 1695): Clearing any old widget stuffs
I/PowerWidget( 1695): Setting up widget
I/PowerWidget( 1695): Default buttons being loaded
I/PowerWidget( 1695): Button list: toggleWifi|toggleBluetooth|toggleGPS|toggleSo
und
I/PowerWidget( 1695): Setting up button: toggleWifi
I/PowerWidget( 1695): Setting up button: toggleBluetooth
I/PowerWidget( 1695): Setting up button: toggleGPS
I/PowerWidget( 1695): Setting up button: toggleSound
D/dalvikvm( 2584): GC_CONCURRENT freed 90K, 47% free 3027K/5639K, external 819K/
1034K, paused 1ms+12ms
I/dalvikvm( 1612): Jit: resizing JitTable from 4096 to 8192
W/SurfaceComposerClient( 1612): Destroying surface while a transaction is open.
Client 0x20efe0: destroying surface 2, mTransactionOpen=1
D/dalvikvm( 1612): GC_EXPLICIT freed 977K, 39% free 5791K/9415K, external 4198K/
5232K, paused 87ms
I/ ( 1547): odm_disp_cabc_thread running
I/ ( 1547): odm_disp_cabc_thread is restarting err_cnt=5
D/dalvikvm( 1695): GC_CONCURRENT freed 235K, 47% free 3126K/5895K, external 2006
K/2013K, paused 2ms+2ms
W/InputManagerService( 1612): Window already focused, ignoring focus gain of: co
[email protected]
W/ProcessStats( 1612): Skipping unknown process pid 2657
W/ProcessStats( 1612): Skipping unknown process pid 2658
I/WindowManager( 1612): Setting rotation to 0, animFlags=0
I/ActivityManager( 1612): Config changed: { scale=1.0 imsi=310/410 loc=en_US tou
ch=3 keys=1/1/2 nav=1/2 orien=1 layout=268435490 uiMode=17 seq=6 themeResource=n
ull}
D/ViewConsistency( 2584): AbsListView [email protected] enabled=
false
D/ViewConsistency( 2584): AbsListView [email protected] enabled=
false
I/PowerWidget( 1695): Clearing any old widget stuffs
I/PowerWidget( 1695): Setting up widget
I/PowerWidget( 1695): Default buttons being loaded
I/PowerWidget( 1695): Button list: toggleWifi|toggleBluetooth|toggleGPS|toggleSo
und
I/PowerWidget( 1695): Setting up button: toggleWifi
I/PowerWidget( 1695): Setting up button: toggleBluetooth
I/PowerWidget( 1695): Setting up button: toggleGPS
I/PowerWidget( 1695): Setting up button: toggleSound
W/SurfaceComposerClient( 1612): Destroying surface while a transaction is open.
Client 0x20efe0: destroying surface 3, mTransactionOpen=1
I/BATTD ( 1539): Battd USB INSERT = Success
I/usbd ( 1540): process_usb_uevent_message(): cable type: usb
I/usbd ( 1540): process_usb_uevent_message(): USB online
I/usbd ( 1540): main(): Cable Status Changed, need to notify Cable Status to
App
I/usbd ( 1540): usbd_notify_current_status(): Notifying App with Current Stat
us : cable_connected
D/UsbListener( 1743): handleEvent: cable_connected
D/MotUsbService( 1743): handleUsbCableAttachment()
D/MotUsbService( 1743): handleUsbEvent(), Received event: 0, current state: 0
D/UsbSettings( 1743): USB mode (UI) : 5
D/UsbListener( 1743): received usb mode change command from UI: usb_mode_charge_
adb
D/UsbListener( 1743): Writing command usb_mode_charge_adb to usbd
I/usbd ( 1540): main(): Read and handle a pending message from the App
I/usbd ( 1540): usbd_socket_event(): recieved usb_mode_charge_adb
I/usbd ( 1540): usbd_socket_event(): Matched new usb mode = 16 , current mode
= 0
I/usbd ( 1540): usbd_set_usb_mode(): new_mode: charge_adb
D/UsbListener( 1743): handleEvent: usb_mode_msc:ok
D/Vold ( 1490): USB connected
I/ftmipcd ( 2666): USBLAN interface not available
D/MotUsbService( 1743): handleUsbEvent(), Received event: 2, current state: 1
D/UsbSettings( 1743): USB mode (UI) : 5
D/UsbSettings( 1743): USB mode (UI) : 5
I/BATTD ( 1539): set_charge_voltage=4200
I/usbd ( 1540): process_usb_uevent_message(): cable type: usb
I/usbd ( 1540): main(): Spurious Cable Event, Ignore
I/BATTD ( 1539): set_charge_current=100
D/lights ( 1612): RGB: USER, "battery", color=0xff00ff00, onMs=0, offMs=0
D/lights ( 1612): RGB, blink=0, RGB=0 0 0
D/SettingsAppWidgetProvider( 2584): Widget is from a previous version... Let's u
pdate
D/SettingsAppWidgetProvider( 2584): No instances yet... Wait for at least one in
stance to exist before adding global settings
I/BATTD ( 1539): set_charge_current=0
I/usbd ( 1540): process_usb_uevent_message(): cable type: usb
I/usbd ( 1540): main(): Spurious Cable Event, Ignore
I/BATTD ( 1539): set_charge_current=100
I/ActivityManager( 1612): Start proc com.google.android.apps.maps for broadcast
com.google.android.apps.maps/com.google.googlenav.android.MapServiceReceiver: pi
d=2693 uid=10041 gids={3003, 1015}
I/usbd ( 1540): main(): get event from usb_device_fd
I/usbd ( 1540): main(): devbuf: none:none:none:get_desc
I/usbd ( 1540): rc: 23 usbd_curr_cable_status: 0
I/usbd ( 1540): main(): pcSwitchbuf = none
I/usbd ( 1540): main(): adbEnablebuf: none
I/usbd ( 1540): main(): tetheringEnablebuf: none
I/usbd ( 1540): main(): length = 9
I/usbd ( 1540): main(): enubuf: get_desc
I/usbd ( 1540): main(): received get_descriptor, enum in progress
I/usbd ( 1540): main(): Notifying Apps that Get_Descriptor was called...
D/UsbListener( 1743): handleEvent: get_descriptor
D/MotUsbService( 1743): handleGetDescriptor()
D/UsbSettings( 1743): USB mode (UI) : 5
D/MotUsbService( 1743): setUsbConnectionNotificationVisibility()
D/UsbSettings( 1743): USB mode (UI) : 5
I/usbd ( 1540): process_usb_uevent_message(): cable type: usb
I/usbd ( 1540): main(): Spurious Cable Event, Ignore
D/MotUsbService( 1743): enableInternalDataConnectivity(): true
D/UsbService( 1612): Got USB reconfiguration event, connected 1
D/dalvikvm( 2693): GC_CONCURRENT freed 131K, 46% free 3045K/5639K, external 0K/0
K, paused 2ms+7ms
D/Tethering( 1612): sendTetherStateChangedBroadcast 1, 0, 0
D/Tethering( 1612): interfaceAdded :usb1
D/BluetoothNetworkService( 1612): updating tether state
D/BluetoothNetworkService( 1612): interface usb1
I/ActivityThread( 2693): Pub com.google.android.maps.LayerInfoProvider: com.goog
le.googlenav.layer.LayerInfoProvider
I/ActivityThread( 2693): Pub com.google.android.maps.TrafficAppWidgetProvider: c
om.google.googlenav.appwidget.traffic.TrafficAppWidgetProvider
I/ActivityThread( 2693): Pub com.google.android.maps.SuggestionProvider: com.goo
gle.googlenav.suggest.android.SuggestProvider
I/ActivityThread( 2693): Pub com.google.android.maps.LocalActivePlacesProvider:
com.google.googlenav.provider.LocalActivePlacesProvider
I/ActivityThread( 2693): Pub com.google.android.maps.StarredItemProvider: com.go
ogle.googlenav.provider.StarredItemProvider
D/dalvikvm( 1695): GC_EXTERNAL_ALLOC freed 151K, 48% free 3101K/5895K, external
1964K/2013K, paused 33ms
I/System.out( 2693): VectorGlobalState: Server:https://mobilemaps.clients.google
.com/glm/mmap Type:3
I/usbd ( 1540): process_usb_uevent_message(): cable type: usb
I/usbd ( 1540): main(): Spurious Cable Event, Ignore
I/usbd ( 1540): main(): get event from usb_device_fd
I/usbd ( 1540): main(): devbuf: none:none:none:enumerated
I/usbd ( 1540): rc: 25 usbd_curr_cable_status: 0
I/usbd ( 1540): main(): pcSwitchbuf = none
I/usbd ( 1540): main(): adbEnablebuf: none
I/usbd ( 1540): main(): tetheringEnablebuf: none
I/usbd ( 1540): main(): length = 11
I/usbd ( 1540): main(): enubuf: enumerated
I/usbd ( 1540): main(): recieved enumerated
I/usbd ( 1540): main(): usbd_app_fd = 12
I/usbd ( 1540): usbd_enum_process(): current usb mode = 16
I/usbd ( 1540): usbd_enum_process(): enum done
W/Vold ( 1490): Ignoring unknown switch 'usb_mass_storage'
D/Vold ( 1490): USB connected
I/BATTD ( 1539): set_charge_current=500
D/dalvikvm( 2693): GC_CONCURRENT freed 226K, 45% free 3390K/6087K, external 0K/0
K, paused 1ms+2ms
I/ActivityThread( 2693): Pub com.google.android.maps.LocalSuggestionProvider: co
m.google.googlenav.provider.LocalSuggestionProvider
I/ActivityThread( 2693): Pub com.google.android.maps.SearchHistoryProvider: com.
google.googlenav.provider.SearchHistoryProvider
I/ActivityThread( 2693): Pub com.google.android.maps.NavigationAvailabilityProvi
der: com.google.googlenav.provider.NavigationAvailabilityProvider
D/dalvikvm( 2174): GC_CONCURRENT freed 275K, 50% free 2853K/5639K, external 0K/0
K, paused 2ms+11ms
D/dalvikvm( 1612): GC_EXPLICIT freed 572K, 39% free 5756K/9415K, external 867K/1
379K, paused 65ms
I/ActivityManager( 1612): Starting: Intent { cmp=com.motorola.usb/.UsbModeSelect
ionActivity bnds=[0,197][540,293] } from pid -1
W/ActivityManager( 1612): startActivity called from non-Activity context; forcin
g Intent.FLAG_ACTIVITY_NEW_TASK for: Intent { flg=0x800000 cmp=com.motorola.usb/
.UsbModeSelectionActivity bnds=[0,197][540,293] }
D/UsbModeSelectionActivity( 1743): onCreate()
D/UsbSettings( 1743): USB mode (UI) : 5
D/UsbModeSelectionActivity( 1743): getPositionFromMode() -- 5
D/dalvikvm( 1743): GC_EXTERNAL_ALLOC freed 165K, 50% free 2728K/5379K, external
0K/0K, paused 36ms
D/ViewConsistency( 1743): AbsListView com.android.internal.app.AlertController$R
[email protected] enabled= false
D/ViewConsistency( 1743): AbsListView com.android.internal.app.AlertController$R
[email protected] enabled= false
D/dalvikvm( 1743): GC_EXTERNAL_ALLOC freed 32K, 49% free 2750K/5379K, external 5
38K/542K, paused 33ms
I/ActivityManager( 1612): Displayed com.motorola.usb/.UsbModeSelectionActivity:
+485ms
D/UsbModeSelectionActivity( 1743): onClick() -- -2
W/InputManagerService( 1612): Window already focused, ignoring focus gain of: co
[email protected]
I/ ( 1547): odm_disp_esd_thread top dispInit=1 state=0
I/ ( 1547): odm_disp_cabc_thread running
I/ ( 1547): odm_disp_cabc_thread is restarting err_cnt=6
I/ ( 1547): odm_disp_esd_thread starting loop dispInit=1 state=1
I/ ( 1547): odm_disp_esd_thread is running(0) state=1
D/dalvikvm( 1716): GC_CONCURRENT freed 363K, 48% free 3189K/6087K, external 0K/0
K, paused 8ms+3ms
I/ ( 1547): odm_disp_esd_thread is running(0) state=1
I/ ( 1547): odm_disp_cabc_thread running
I/ ( 1547): odm_disp_cabc_thread is restarting err_cnt=7
D/SettingsAppWidgetProvider( 2584): Widget is from a previous version... Let's u
pdate
D/SettingsAppWidgetProvider( 2584): No instances yet... Wait for at least one in
stance to exist before adding global settings
I/TelephonyRegistry( 1612): notifyServiceState: 0 home AT&T AT&T 310410 UMTS CS
S not supported -1 -1RoamInd: -1DefRoamInd: -1EmergOnly: false
I/TelephonyRegistry( 1612): notifyDataConnection: state=2 isDataConnectivityPoss
ible=true reason=null interfaceName=ppp0 networkType=3
I/TelephonyRegistry( 1612): notifyServiceState: 0 home AT&T AT&T 310410 HSPA CS
S not supported -1 -1RoamInd: -1DefRoamInd: -1EmergOnly: false
I/TelephonyRegistry( 1612): notifyDataConnection: state=2 isDataConnectivityPoss
ible=true reason=null interfaceName=ppp0 networkType=10
I/ ( 1547): odm_disp_esd_thread is running(10) state=1
W/ProcessStats( 1612): Skipping unknown process pid 2887
W/ProcessStats( 1612): Skipping unknown process pid 2888
I/TelephonyRegistry( 1612): notifyServiceState: 0 home AT&T AT&T 310410 UMTS CS
S not supported -1 -1RoamInd: -1DefRoamInd: -1EmergOnly: false
I/TelephonyRegistry( 1612): notifyDataConnection: state=2 isDataConnectivityPoss
ible=true reason=null interfaceName=ppp0 networkType=3
I/TelephonyRegistry( 1612): notifyServiceState: 0 home AT&T AT&T 310410 HSPA CS
S not supported -1 -1RoamInd: -1DefRoamInd: -1EmergOnly: false
I/TelephonyRegistry( 1612): notifyDataConnection: state=2 isDataConnectivityPoss
ible=true reason=null interfaceName=ppp0 networkType=10
E/WifiService( 1612): Failed to load Wi-Fi driver.
D/SettingsAppWidgetProvider( 2584): Widget is from a previous version... Let's u
pdate
D/SettingsAppWidgetProvider( 2584): No instances yet... Wait for at least one in
stance to exist before adding global settings
I/ ( 1547): odm_disp_esd_thread is running(5) state=1
I/ ( 1547): odm_disp_cabc_thread running
I/ ( 1547): odm_disp_cabc_thread is restarting err_cnt=8
I/ ( 1547): odm_disp_esd_thread is running(0) state=1
D/BluetoothService( 1612): Bluetooth state 10 -> 11
I/bluedroid( 1612): Starting hciattach daemon
V/BluetoothEventRedirector( 2584): Received android.bluetooth.adapter.action.STA
TE_CHANGED
D/SettingsAppWidgetProvider( 2584): Widget is from a previous version... Let's u
pdate
D/SettingsAppWidgetProvider( 2584): No instances yet... Wait for at least one in
stance to exist before adding global settings
I/ActivityManager( 1612): Start proc com.android.bluetooth for broadcast com.and
roid.bluetooth/.opp.BluetoothOppReceiver: pid=2910 uid=10027 gids={3003, 3002, 3
001, 1015}
D/szipinf ( 2910): Initializing inflate state
I/ActivityThread( 2910): Pub com.android.bluetooth.opp: com.android.bluetooth.op
p.BluetoothOppProvider
V/BluetoothMasReceiver( 2910): BluetoothMasReceiver onReceive :android.bluetooth
.adapter.action.STATE_CHANGED
E/BluetoothMasReceiver( 2910): BluetoothMasReceiver onReceive :android.bluetooth
.adapter.action.STATE_CHANGED
D/BluetoothMasReceiver( 2910): Bluetooth STATE CHANGED to 11
I/ActivityManager( 1612): No longer want com.google.android.apps.maps:FriendServ
ice (pid 2185): hidden #16
I/ ( 1547): odm_disp_esd_thread is running(5) state=1
E/bluedroid( 1612): bt_enable: Timeout waiting for HCI device to come up
D/BluetoothService( 1612): Bluetooth state 11 -> 10
V/BluetoothEventRedirector( 2584): Received android.bluetooth.adapter.action.STA
TE_CHANGED
D/SettingsAppWidgetProvider( 2584): Widget is from a previous version... Let's u
pdate
D/SettingsAppWidgetProvider( 2584): No instances yet... Wait for at least one in
stance to exist before adding global settings
D/dalvikvm( 1612): GC_CONCURRENT freed 839K, 39% free 5786K/9415K, external 867K
/1379K, paused 3ms+5ms
I/ ( 1547): odm_disp_cabc_thread running
I/ ( 1547): odm_disp_cabc_thread is restarting err_cnt=9
V/BluetoothMasReceiver( 2910): BluetoothMasReceiver onReceive :android.bluetooth
.adapter.action.STATE_CHANGED
E/BluetoothMasReceiver( 2910): BluetoothMasReceiver onReceive :android.bluetooth
.adapter.action.STATE_CHANGED
D/BluetoothMasReceiver( 2910): Bluetooth STATE CHANGED to 10
I/GOPOWER_TaskReceiver( 1927): action = com.gau.go.launcherex.gowidget.powersave
.update.action_update
I/ ( 1547): odm_disp_esd_thread is running(4) state=1

[Q] Boot Loop CM9 for Allwinner A10

Hi,
Tablet hangs in Bootloop after installed cm9_nightly_20120721 + protab2xxl_compatibility_1.2.0 startet from cwm 6.0.1.0.
Noticed that the "/data" partition only has 15MB of Space with 0B Byte free. I wiped the cache after installation with cwm, i am not able to boot to cwm again because key combinations not work on this device.
Got a T15A Generic tablet which has the same Hardware than protab 2 xxl, Goclever A103, Coby 1042 etc...
Any idear how to get CM9 or CM10 running?
Code:
--------- beginning of /dev/log/main
I/cm ( 70): Welcome to Android 4.0.4 / CyanogenMod-9-20120721-UNOFFICIAL-907
I/cm ( 71): _
I/cm ( 72): __ __ _ ___ _ _ __ ___ __ _ _ _ _ __ __))
I/cm ( 73): ((_ \(/'((_( ((\( ((_)((_( (('((\( ((`1( ((_)((_(
I/cm ( 74): )) _))
I/cm ( 75):
I/run-parts( 65): done Additional Modules Autoload
I/run-parts( 65): done Virtual Memory Parameter Tweaks
I/run-parts( 65): /system/etc/init.d/04mount[7]: cannot create /sys/devices/virtual/bdi/179:0/read_ahead_kb: No such file or directory
I/run-parts( 65): done Internal Storage Speed Fix
I/run-parts( 65): done devlistener started
I/run-parts( 65): done USB Audio Modules Autoload
--------- beginning of /dev/log/system
I/USB3G ( 109): usb 3g monitor v0.1 start
E/NetlinkEvent( 89): NetlinkEvent::FindParam(): Parameter 'DEVNAME' not found
D/DevListener( 89): Changed the permission of file /sys/devices/platform/sunxi-rfkill.0/rfkill/rfkill0/state to 666
I/DEBUG ( 100): debuggerd: Jul 21 2012 09:15:10
E/NetlinkEvent( 89): NetlinkEvent::FindParam(): Parameter 'DEVNAME' not found
I/USB3G ( 109): event { 'add', '/devices/platform/sw_hcd_host0/usb1', 'usb', '', 189, 0 }
I/USB3G ( 109): event { 'add', '/devices/platform/sw-ehci.1/usb2', 'usb', '', 189, 128 }
I/USB3G ( 109): event { 'add', '/devices/platform/sw-ohci.1/usb3', 'usb', '', 189, 256 }
I/Vold ( 98): Vold 2.1 (the revenge) firing up
I/Netd ( 99): Netd 1.0 starting
D/Vold ( 98): Volume sdcard state changing -1 (Initializing) -> 0 (No-Media)
D/Vold ( 98): Volume extsd state changing -1 (Initializing) -> 0 (No-Media)
D/Vold ( 98): Volume usbhost1 state changing -1 (Initializing) -> 0 (No-Media)
D/Vold ( 98): Volume sdcard state changing 0 (No-Media) -> 1 (Idle-Unmounted)
E/NetlinkEvent( 89): NetlinkEvent::FindParam(): Parameter 'DEVNAME' not found
I/ ( 104): ServiceManager: 0x65c910
D/AndroidRuntime( 103):
D/AndroidRuntime( 103): >>>>>> AndroidRuntime START com.android.internal.os.ZygoteInit <<<<<<
D/AndroidRuntime( 103): CheckJNI is OFF
I/SurfaceFlinger( 102): SurfaceFlinger is starting
I/SurfaceFlinger( 102): SurfaceFlinger's main thread ready to run. Initializing graphics H/W...
I/gralloc ( 102): using (fd=13)
I/gralloc ( 102): id =
I/gralloc ( 102): xres = 1024 px
I/gralloc ( 102): yres = 600 px
I/gralloc ( 102): xres_virtual = 1024 px
I/gralloc ( 102): yres_virtual = 1200 px
I/gralloc ( 102): bpp = 32
I/gralloc ( 102): r = 16:8
I/gralloc ( 102): g = 8:8
I/gralloc ( 102): b = 0:8
I/gralloc ( 102): width = 163 mm (159.568100 dpi)
I/gralloc ( 102): height = 95 mm (160.421051 dpi)
I/gralloc ( 102): refresh rate = 61.07 Hz
D/libEGL ( 102): loaded /system/lib/egl/libGLES_android.so
D/libEGL ( 102): loaded /system/lib/egl/libEGL_mali.so
D/dalvikvm( 103): DexOpt: incorrect opt magic number (0xff ff ff ff)
D/dalvikvm( 103): ODEX file is stale or bad; removing and retrying (/data/dalvik-cache/[email protected]@[email protected])
D/libEGL ( 102): loaded /system/lib/egl/libGLESv1_CM_mali.so
D/libEGL ( 102): loaded /system/lib/egl/libGLESv2_mali.so
E/SurfaceFlinger( 102): couldn't find an EGLConfig matching the screen format
I/SurfaceFlinger( 102): EGL informations:
I/SurfaceFlinger( 102): # of configs : 28
I/SurfaceFlinger( 102): vendor : Android
I/SurfaceFlinger( 102): version : 1.4 Android META-EGL
I/SurfaceFlinger( 102): extensions: EGL_KHR_image EGL_KHR_image_base EGL_KHR_image_base EGL_KHR_image_pixmap L_KHR_gl_texture_2D_image EGL_KHR_gl_texture_cubemap_image EGL_KHR_gl_renderbuffer_image EGL_KHR_fence_sync EGL_ANDROID_image_native_buffer EGL_ANDROID_image_native_buffer
I/SurfaceFlinger( 102): Client API: OpenGL ES
I/SurfaceFlinger( 102): EGLSurface: 5-6-5-0, config=0x0
I/SurfaceFlinger( 102): OpenGL informations:
I/SurfaceFlinger( 102): vendor : ARM
I/SurfaceFlinger( 102): renderer : Mali-400 MP
I/SurfaceFlinger( 102): version : OpenGL ES-CM 1.1
I/SurfaceFlinger( 102): extensions: GL_OES_byte_coordinates GL_OES_fixed_point GL_OES_single_precision GL_OES_matrix_get GL_OES_read_format GL_OES_compressed_paletted_texture GL_OES_point_size_array GL_OES_point_sprite GL_OES_texture_npot GL_OES_query_matrix GL_OES_matrix_palette GL_OES_extended_matrix_palette GL_OES_compressed_ETC1_RGB8_texture GL_OES_EGL_image GL_OES_draw_texture GL_OES_depth_texture GL_OES_packed_depth_stencil GL_EXT_texture_format_BGRA8888 GL_OES_framebuffer_object GL_OES_stencil8 GL_OES_depth24 GL_ARM_rgba8 GL_OES_EGL_image_external GL_OES_EGL_sync GL_OES_rgb8_rgba8 GL_EXT_multisampled_render_to_texture GL_OES_texture_cube_map GL_EXT_discard_framebuffer
I/SurfaceFlinger( 102): GL_MAX_TEXTURE_SIZE = 4096
I/SurfaceFlinger( 102): GL_MAX_VIEWPORT_DIMS = 4096 x 4096
I/SurfaceFlinger( 102): flags = 00000000
D/display ( 102): start open_display!ctx->mFD_disp = 12
E/DisplayDispatcher( 102): Open Display Device Succesfully!
W/DisplayDispatcher( 102): display dispatcher enabled
D/libEGL ( 151): loaded /system/lib/egl/libGLES_android.so
D/libEGL ( 151): loaded /system/lib/egl/libEGL_mali.so
D/libEGL ( 151): loaded /system/lib/egl/libGLESv1_CM_mali.so
D/libEGL ( 151): loaded /system/lib/egl/libGLESv2_mali.so
D/dalvikvm( 103): Zip inflate: partial write (will retry): (8152 of 32768)
E/dalvikvm( 103): Zip inflate: write failed: No space left on device
E/dalvikvm( 103): Unable to extract+optimize DEX from '/system/framework/framework.jar'
D/dalvikvm( 103): Unable to process classpath element '/system/framework/framework.jar'
I/ ( 105): ServiceManager: 0x1b1d958
E/dalvikvm( 103): opt header write failed: No space left on device
I/dalvikvm( 103): Unable to open or create cache for /system/framework/android.policy.jar (/data/dalvik-cache/[email protected]@[email protected])
D/dalvikvm( 103): Unable to process classpath element '/system/framework/android.policy.jar'
E/dalvikvm( 103): opt header write failed: No space left on device
I/dalvikvm( 103): Unable to open or create cache for /system/framework/services.jar (/data/dalvik-cache/[email protected]@[email protected])
D/dalvikvm( 103): Unable to process classpath element '/system/framework/services.jar'
E/dalvikvm( 103): opt header write failed: No space left on device
I/dalvikvm( 103): Unable to open or create cache for /system/framework/apache-xml.jar (/data/dalvik-cache/[email protected]@[email protected])
D/dalvikvm( 103): Unable to process classpath element '/system/framework/apache-xml.jar'
E/dalvikvm( 103): opt header write failed: No space left on device
I/dalvikvm( 103): Unable to open or create cache for /system/framework/filterfw.jar (/data/dalvik-cache/[email protected]@[email protected])
D/dalvikvm( 103): Unable to process classpath element '/system/framework/filterfw.jar'
I/AudioFlinger( 105): Loaded primary audio interface from Sunxi audio HW HAL (audio)
I/AudioFlinger( 105): Using 'Sunxi audio HW HAL' (audio.primary) as the primary audio interface
I/AudioFlinger( 105): Loaded a2dp audio interface from A2DP Audio HW HAL (audio)
I/CameraService( 105): CameraService started (pid=105)
D/CameraHardware( 105): zoom_ratios: 100,106,113,120,126,133,140,146,153,160,166,173,180,186,193,200,206,213,220,226,233,240,246,253,260,266,273,280,286,293,300
I/AudioFlinger( 105): AudioFlinger's thread 0x1b2d258 ready to run
W/AudioFlinger( 105): Thread AudioOut_1 cannot connect to the power manager service
I/AudioPolicyService( 105): Loaded audio policy from LEGACY Audio Policy HAL (audio_policy)
E/JNIHelp ( 103): Native registration unable to find class 'android/debug/JNITest', aborting
F/libc ( 103): Fatal signal 11 (SIGSEGV) at 0xdeadbaad (code=1)
I/ServiceManager( 97): service 'media.audio_flinger' died
I/ServiceManager( 97): service 'media.player' died
I/ServiceManager( 97): service 'media.camera' died
I/ServiceManager( 97): service 'media.audio_policy' died
LOOP from here
Code:
Filesystem Size Used Free Blksize
/dev 406M 48K 406M 4096
/mnt/asec 406M 0K 406M 4096
/mnt/obb 406M 0K 406M 4096
/system 503M 182M 321M 4096
/data 15M 15M 0K 4096
/cache 251M 4M 247M 4096
push
I have got the same error on A13 and cannot find answer. what to do with it?
I think that it happened because "EGLSurface: 5-6-5-0"(5+6+5+0 = 16bits) does not relate with bpp = 32bits; r = 16:8; g = 8:8; b = 0:8; + 24:8 bits for alpha transparent layer. You need to get "EGLSurface: 8-8-8-8" (8+8+8+8=32).
gralloc allocated 32bits (according to your display) but it is not present in EGLConfig.
I need help to solve it.

CM10.1 Wifi Issue

I'm posting this here because I am the only developer for my tablet and I cannot solve this wifi issue.
My information has not changed since CM10, where it worked just fine. But for some reason its not working with Android 4.2
https://github.com/giveen/android_device_dell_streak7/tree/cm10.1
Code:
/WifiService( 530): setWifiEnabled: true pid=757, uid=1000
D/BluetoothAdapter( 658): 1088952104: getState() : mService = null. Returning STATE_OFF
D/dalvikvm( 530): GC_CONCURRENT freed 798K, 21% free 5425K/6796K, paused 9ms+5ms, total 74ms
D/BluetoothAdapter( 757): 1088293664: getState() : mService = null. Returning STATE_OFF
W/PrintK ( 530): ## wifi_probe
W/PrintK ( 530): wifi_set_power = 1
D/dalvikvm( 757): GC_CONCURRENT freed 371K, 13% free 3895K/4444K, paused 3ms+9ms, total 76ms
W/PrintK ( 530): wifi_set_carddetect = 1
W/PrintK ( 530):
W/PrintK ( 530): Dongle Host Driver, version 4.218.248.31
D/PrintK ( 5): <6>mmc2: new high speed SDIO card at address 0001
W/PrintK ( 5): DHD: dongle ram size is set to 294912(orig 294912)
W/PrintK ( 5): Firmware version = wl0: Feb 11 2011 17:00:41 version 4.218.248.23
W/PrintK ( 5): wl configuration done!
W/PrintK ( 5): wlan0: Broadcom Dongle Host Driver mac=48:5d:60:fa:e5:8d
W/PrintK ( 5): Exited wl_control_wl_start
D/Tethering( 530): sendTetherStateChangedBroadcast 0, 0, 0
E/WifiStateMachine( 530): Failed to reload STA firmware java.lang.IllegalStateException: command '7 softap fwreload wlan0 STA' failed with '400 7 Softap operation failed (No such file or directory)'
D/Tethering( 530): sendTetherStateChangedBroadcast 1, 0, 0
D/Tethering( 530): InitialState.processMessage what=4
D/Tethering( 530): sendTetherStateChangedBroadcast 1, 0, 0
D/CommandListener( 91): Setting iface cfg
D/CommandListener( 91): Trying to bring down wlan0
D/Tethering( 530): InitialState.processMessage what=4
D/Tethering( 530): sendTetherStateChangedBroadcast 0, 0, 0
I/wpa_supplicant( 1433): Successfully initialized wpa_supplicant
W/PrintK ( 1433): Exited wl_control_wl_start
D/Tethering( 530): sendTetherStateChangedBroadcast 1, 0, 0
E/WifiConfigStore( 530): Error parsing configurationjava.io.FileNotFoundException: /data/misc/wifi/ipconfig.txt: open failed: ENOENT (No such file or directory)
D/BluetoothAdapter( 757): 1088293664: getState() : mService = null. Returning STATE_OFF
E/WifiStateMachine( 530): Failed to set frequency band 0
D/BluetoothAdapter( 658): 1088952104: getState() : mService = null. Returning STATE_OFF
W/PrintK ( 1433): wl_iw_iscan_set_scan: Scan from SIOCGIWSCAN not supported
W/wpa_supplicant( 1433): wlan0: Failed to initiate AP scan
V/PrintK ( 556): <7>[ASOC-DBG]tegra_dapm_event_int_spk SND_SOC_DAPM_EVENT_ON ? 0
V/PrintK ( 556):
W/PrintK ( 1433): wl_iw_iscan_set_scan: Scan from SIOCGIWSCAN not supported
W/wpa_supplicant( 1433): wlan0: Failed to initiate AP scan
V/PrintK ( 0): <7>wlan0: no IPv6 routers present
V/PrintK ( 97): <7>[ASOC-DBG]tegra_dapm_event_int_spk SND_SOC_DAPM_EVENT_ON ? 2
V/PrintK ( 97):
W/ResourceType( 757): getEntry failing because entryIndex 129 is beyond type entryCount 4
D/dalvikvm( 757): GC_CONCURRENT freed 492K, 15% free 3861K/4532K, paused 3ms+11ms, total 46ms
D/PrintK ( 97): <6>wm8903_set_dai_trigger 1
W/PrintK ( 1433): wl_iw_iscan_set_scan: Scan from SIOCGIWSCAN not supported
W/wpa_supplicant( 1433): wlan0: Failed to initiate AP scan
D/PrintK ( 97): <6>wm8903_set_dai_trigger 0
W/PrintK ( 64): dog, +tegra_wdt_set_timeout, wdt->timeout=130
W/PrintK ( 1433): wl_iw_iscan_set_scan: Scan from SIOCGIWSCAN not supported
W/wpa_supplicant( 1433): wlan0: Failed to initiate AP scan
D/dalvikvm( 725): GC_CONCURRENT freed 196K, 12% free 2812K/3184K, paused 3ms+2ms, total 27ms
D/dalvikvm( 725): GC_CONCURRENT freed 193K, 11% free 3023K/3396K, paused 3ms+3ms, total 28ms
D/NvOsDebugPrintf( 725): NvRmPrivGetChipIdStub: Could not read Tegra chip id/rev
D/NvOsDebugPrintf( 725): Expected on kernels without Tegra3 support, using Tegra2
D/dalvikvm( 725): GC_FOR_ALLOC freed 86K, 12% free 3033K/3432K, paused 20ms, total 20ms
I/dalvikvm-heap( 725): Grow heap (frag case) to 3.756MB for 654928-byte allocation
D/dalvikvm( 725): GC_CONCURRENT freed 3K, 10% free 3669K/4072K, paused 2ms+3ms, total 25ms
D/dalvikvm( 725): WAIT_FOR_CONCURRENT_GC blocked 23ms
D/dalvikvm( 725): GC_FOR_ALLOC freed 175K, 9% free 3792K/4148K, paused 21ms, total 21ms
I/dalvikvm-heap( 725): Grow heap (frag case) to 5.188MB for 1379576-byte allocation
D/dalvikvm( 725): GC_CONCURRENT freed 19K, 7% free 5119K/5496K, paused 2ms+3ms, total 23ms
D/dalvikvm( 725): WAIT_FOR_CONCURRENT_GC blocked 20ms
D/dalvikvm( 725): GC_FOR_ALLOC freed 0K, 7% free 5120K/5496K, paused 19ms, total 19ms
I/dalvikvm-heap( 725): Grow heap (frag case) to 5.950MB for 818656-byte allocation
D/dalvikvm( 725): GC_FOR_ALLOC freed 0K, 6% free 5919K/6296K, paused 20ms, total 20ms
V/PrintK ( 556): <7>[ASOC-DBG]tegra_dapm_event_int_spk SND_SOC_DAPM_EVENT_ON ? 0
V/PrintK ( 556):
V/PrintK ( 97): <7>[ASOC-DBG]tegra_dapm_event_int_spk SND_SOC_DAPM_EVENT_ON ? 2
V/PrintK ( 97):
D/PrintK ( 97): <6>wm8903_set_dai_trigger 1
D/WifiConfigStore( 530): IP config changed SSID = "DeathStar" linkProperties: LinkAddresses: [] Routes: [] DnsAddresses: []
D/WifiConfigStore( 530): proxy changed SSID = "DeathStar"
W/PrintK ( 1433): wl_iw_iscan_set_scan: Scan from SIOCGIWSCAN not supported
W/wpa_supplicant( 1433): wlan0: Failed to initiate AP scan
W/PrintK ( 1433): wl_iw_iscan_set_scan: Scan from SIOCGIWSCAN not supported
W/wpa_supplicant( 1433): wlan0: Failed to initiate AP scan
D/CommandListener( 91): Clearing all IP addresses on wlan0
D/ConnectivityService( 530): ConnectivityChange for WIFI: DISCONNECTED/DISCONNECTED
D/ConnectivityService( 530): Attempting to switch to mobile
D/ConnectivityService( 530): Attempting to switch to BLUETOOTH_TETHER
D/dalvikvm( 757): GC_CONCURRENT freed 195K, 10% free 4113K/4532K, paused 3ms+5ms, total 40ms
W/IInputConnectionWrapper( 757): finishComposingText on inactive InputConnection
W/PrintK ( 1433): wl_iw_iscan_set_scan: Scan from SIOCGIWSCAN not supported
W/wpa_supplicant( 1433): wlan0: Failed to initiate AP scan
W/PrintK ( 1433): wl_iw_iscan_set_scan: Scan from SIOCGIWSCAN not supported
W/wpa_supplicant( 1433): wlan0: Failed to initiate AP scan
D/dalvikvm( 530): GC_CONCURRENT freed 658K, 21% free 5428K/6796K, paused 14ms+5ms, total 60ms
W/PrintK ( 1433): wl_iw_iscan_set_scan: Scan from SIOCGIWSCAN not supported
W/wpa_supplicant( 1433): wlan0: Failed to initiate AP scan
D/Tethering( 530): MasterInitialState.processMessage what=3
D/PrintK ( 97): <6>wm8903_set_dai_trigger 0
I/UpdateCheckReceiver( 1066): Got connectivity change, has connection: false
W/PrintK ( 1433): wl_iw_iscan_set_scan: Scan from SIOCGIWSCAN not supported
W/wpa_supplicant( 1433): wlan0: Failed to initiate AP scan
D/CommandListener( 91): Clearing all IP addresses on wlan0
D/WifiService( 530): setWifiEnabled: false pid=757, uid=1000
D/BluetoothAdapter( 658): 1088952104: getState() : mService = null. Returning STATE_OFF
D/BluetoothAdapter( 757): 1088293664: getState() : mService = null. Returning STATE_OFF
W/PrintK ( 1433): Failed to set 'wpa_auth'iovar
D/PrintK ( 1433): <6>ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
I/wpa_supplicant( 1433): wlan0: CTRL-EVENT-TERMINATING
D/Tethering( 530): InitialState.processMessage what=4
D/Tethering( 530): sendTetherStateChangedBroadcast 0, 0, 0
W/Netd ( 91): No subsystem found in netlink event
D/NetlinkEvent( 91): Unexpected netlink message. type=0x11
W/PrintK ( 530): ## wifi_remove
W/PrintK ( 530): wifi_set_carddetect = 0
W/PrintK ( 530): wifi_set_power = 0
D/PrintK ( 68): <6>mmc2: card 0001 removed
W/PrintK ( 68): [MMC]> host name mmc2, q_wlan_flag: 0
Hi,
I use a S3 (i9000) and after switching from CM10 o CM10.1 I lost the wifi internet connection at the office. I can connect, but I don't "get" an internet connection form the router. wifi symbol is grey, not blue.
At home, I have two wifi routers, with both provide a stable connection with internet.
The router settings have not changed!
Bx2
Nice thread jacking. Mine has to do with actual development.
giveen said:
Nice thread jacking. Mine has to do with actual development.
Click to expand...
Click to collapse
I tried to tell you that it happens to other devices too. I wasn't trying to jack your thread. Making a log so you could compare failed.
My apologies.
Sorry for jumping on you.

[Q] [CM12] Surfaceflinger seems to block boot process

Hi,
I'm trying to port cm12 to htc one v, which doesn't have devs anymore, so I'm asking here.
The phone starts surfaceflinger and shows the bootanimation, then it does nothing:
Code:
--------- beginning of main
I/lowmemorykiller( 1680): Using in-kernel low memory killer interface
I/cm ( 1696): ____ _ _ ____ _ _ ____ ____ ____ _ _ _ _ ____ ___
--------- beginning of system
I/Vold ( 1682): Vold 2.1 (the revenge) firing up
D/Vold ( 1682): Volume sdcard0 state changing -1 (Initializing) -> 0 (No-Media)
I/Cryptfs ( 1682): Check if PFE is activated on Boot
I/cm ( 1697): | \_/ |__| |\ | | | | __ |___ |\ | |\/| | | | \
E/Cryptfs ( 1682): Bad magic for real block device /dev/block/platform/msm_sdcc.2/by-num/p26
E/Cryptfs ( 1682): Error getting crypt footer and key
I/cm ( 1698): |___ | | | | \| |__| |__] |___ | \| | | |__| |__/
I/SurfaceFlinger( 1687): SurfaceFlinger is starting
I/cm ( 1701): Welcome to Android 5.0.2 / CyanogenMod-12-20150209-UNOFFICIAL-alpha_0.4-primou
I/SurfaceFlinger( 1687): SurfaceFlinger's main thread ready to run. Initializing graphics H/W...
D/libEGL ( 1687): loaded /system/lib/egl/libEGL_adreno200.so
D/libEGL ( 1687): loaded /system/lib/egl/libGLESv1_CM_adreno200.so
D/libEGL ( 1687): loaded /system/lib/egl/libGLESv2_adreno200.so
D/Vold ( 1682): Volume sdcard0 state changing 0 (No-Media) -> 2 (Pending)
D/DirectVolume( 1682): DirectVolume::handlePartitionAdded -> MAJOR 179, MINOR 65, PARTN 1
D/Vold ( 1682): Volume sdcard0 state changing 2 (Pending) -> 1 (Idle-Unmounted)
I/Adreno200-EGL( 1687): <qeglDrvAPI_eglInitialize:269>: EGL 1.4 QUALCOMM build: AU_LINUX_ANDROID_JB_VANILLA.04.02.02.60.051_msm8960_JB_VANILLA_CL2997615_release_AU (CL2997615)
I/Adreno200-EGL( 1687): Build Date: 04/11/13 Thu
I/Adreno200-EGL( 1687): Local Branch:
I/Adreno200-EGL( 1687): Remote Branch: quic/mako_jb_mr1
I/Adreno200-EGL( 1687): Local Patches: NONE
I/Adreno200-EGL( 1687): Reconstruct Branch: AU_LINUX_ANDROID_JB_VANILLA.04.02.02.60.051 + NOTHING
I/gralloc ( 1687): using (fd=13)
I/gralloc ( 1687): id = msmfb40_0
I/gralloc ( 1687): xres = 480 px
I/gralloc ( 1687): yres = 800 px
I/gralloc ( 1687): xres_virtual = 480 px
I/gralloc ( 1687): yres_virtual = 2400 px
I/gralloc ( 1687): bpp = 32
I/gralloc ( 1687): r = 0:8
I/gralloc ( 1687): g = 8:8
I/gralloc ( 1687): b = 16:8
I/gralloc ( 1687): width = 52 mm (234.461533 dpi)
I/gralloc ( 1687): height = 88 mm (230.909088 dpi)
I/gralloc ( 1687): refresh rate = 52429280.00 Hz
D/CALCFPS ( 1687): DEBUG_CALC_FPS: 0
D/CALCFPS ( 1687): period: 10
D/CALCFPS ( 1687): ignorethresh_us: 500000
D/CALCFPS ( 1687): DEBUG_CALC_FPS: 0
D/CALCFPS ( 1687): period: 10
D/CALCFPS ( 1687): ignorethresh_us: 500000
E/SELinux ( 1681): avc: denied { add } for service=display.hwcservice scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:system_server_service:s0 tclass=service_manager
I/Adreno200-C2D( 1687): <c2d_wrapper_init:126>: C2D2 initializing z180 version: libc2d2_z180.so
I/Adreno200-C2D( 1687): <c2d_wrapper_init:183>: C2D2 wrapper initialized successfully
I/hwcomposer( 1687): Initializing Qualcomm Hardware Composer
I/hwcomposer( 1687): MDP version: 400
I/hwcomposer( 1687): DYN composition threshold : 2.000000
I/hwcomposer( 1687): hwc_device_open: Faking Hardware VSYNC
I/SurfaceFlinger( 1687): Using composer version 1.0
I/hwcomposer( 1687): Initializing UEvent Listener Thread
I/hwcomposer( 1687): Initializing VSYNC Thread
W/SurfaceFlinger( 1687): no suitable EGLConfig found, trying a simpler query
I/SurfaceFlinger( 1687): EGL information:
I/SurfaceFlinger( 1687): vendor : Android
I/SurfaceFlinger( 1687): version : 1.4 Android META-EGL
I/SurfaceFlinger( 1687): extensions: EGL_KHR_get_all_proc_addresses EGL_ANDROID_presentation_time EGL_KHR_image EGL_KHR_image_base EGL_KHR_lock_surface EGL_KHR_gl_texture_2D_image EGL_KHR_gl_texture_cubemap_image EGL_KHR_gl_renderbuffer_image EGL_KHR_fence_sync EGL_EXT_create_context_robustness EGL_ANDROID_image_native_buffer EGL_ANDROID_recordable
I/SurfaceFlinger( 1687): Client API: OpenGL_ES
I/SurfaceFlinger( 1687): EGLSurface: 8-8-8-8, config=0x4
I/SurfaceFlinger( 1687): OpenGL ES informations:
I/SurfaceFlinger( 1687): vendor : Qualcomm
I/SurfaceFlinger( 1687): renderer : Adreno (TM) 205
I/SurfaceFlinger( 1687): version : OpenGL ES 2.0 [email protected] [email protected] ([email protected])
I/SurfaceFlinger( 1687): extensions: GL_EXT_debug_marker GL_AMD_compressed_ATC_texture GL_AMD_performance_monitor GL_AMD_program_binary_Z400 GL_EXT_robustness GL_EXT_texture_format_BGRA8888 GL_EXT_texture_type_2_10_10_10_REV GL_NV_fence GL_OES_compressed_ETC1_RGB8_texture GL_OES_depth_texture GL_OES_depth24 GL_OES_EGL_image GL_OES_EGL_image_external GL_OES_element_index_uint GL_OES_fbo_render_mipmap GL_OES_fragment_precision_high GL_OES_get_program_binary GL_OES_packed_depth_stencil GL_OES_rgb8_rgba8 GL_OES_standard_derivatives GL_OES_texture_3D GL_OES_texture_float GL_OES_texture_half_float GL_OES_texture_half_float_linear GL_OES_texture_npot GL_OES_vertex_half_float GL_OES_vertex_type_10_10_10_2 GL_OES_vertex_array_object GL_QCOM_alpha_test GL_QCOM_binning_control GL_QCOM_driver_control GL_QCOM_perfmon_global_mode GL_QCOM_extended_get GL_QCOM_extended_get2 GL_QCOM_tiled_rendering GL_QCOM_writeonly_rendering GL_AMD_compressed_3DC_texture GL_EXT_texture_filter_anisotropic
I/SurfaceFlinger( 1687): GL_MAX_TEXTURE_SIZE = 4096
I/SurfaceFlinger( 1687): GL_MAX_VIEWPORT_DIMS = 4096
E/cutils-trace( 1687): Error opening trace file: No such file or directory (2)
D/SurfaceFlinger( 1687): Set power mode=2, type=0 flinger=0x40662000
D/SurfaceFlinger( 1687): SF. shader cache generated - 26 shaders in 684.494873 ms
D/libEGL ( 1787): loaded /system/lib/egl/libEGL_adreno200.so
D/libEGL ( 1787): loaded /system/lib/egl/libGLESv1_CM_adreno200.so
D/libEGL ( 1787): loaded /system/lib/egl/libGLESv2_adreno200.so
I/Adreno200-EGL( 1787): <qeglDrvAPI_eglInitialize:269>: EGL 1.4 QUALCOMM build: AU_LINUX_ANDROID_JB_VANILLA.04.02.02.60.051_msm8960_JB_VANILLA_CL2997615_release_AU (CL2997615)
I/Adreno200-EGL( 1787): Build Date: 04/11/13 Thu
I/Adreno200-EGL( 1787): Local Branch:
I/Adreno200-EGL( 1787): Remote Branch: quic/mako_jb_mr1
I/Adreno200-EGL( 1787): Local Patches: NONE
I/Adreno200-EGL( 1787): Reconstruct Branch: AU_LINUX_ANDROID_JB_VANILLA.04.02.02.60.051 + NOTHING
E/cutils-trace( 1787): Error opening trace file: No such file or directory (2)
E/BootAnimation( 1787): couldn't find audio_conf.txt
W/BootAnimation( 1787): Audio service is not initiated.
D/BootAnimation( 1787): Use save memory method, maybe small fps in actual.
D/BootAnimation( 1787): Use save memory method, maybe small fps in actual.
I can kill surfaceflinger, and zygote starts, but then dex2oat fails.
This is my first android rom and I just wanna know how I may find the problem.
If you want, you can look at my device tree on github: https://github.com/AndroidPrimou/android_device_htc_msm7x30-common/tree/cm-12.0-new, https://github.com/AndroidPrimou/android_device_htc_primou/tree/cm-12.0-new
Kernel: https://github.com/rastomanchik/android_kernel_htc_primou
Please help, I'm completely clueless

[Q] Phone bootloops on first boot with lollipop ROMs

I think my i9100 (16 GB model) has a serious KitKat addiction issue...
I've tried to switch from SlimSaber 4.4.4 to a 5.1 ROM and the phone just gets stuck on the first boot. Since I can't access the logcats on the first boot i don't know what is causing the phone to get stuck.
Here's what i tried and came up with the same result:
- From a KitKat ROM -> Flash a 5.0.4 one with a full wipe before and /system format, or just a data / cache / dalvik wipe
- From various TWRP / CWM KitKat Recovery -> FULL format on ALL partitions on the phone (sdcard included) -> Flash 5.0.4 / 5.1
- From a KitKat ROM -> Flash a 5.1 one with a /system format before and a data / cache / dalvik wipe after
- From various TWRP / CWM KitKat / Lollipop Recovery -> Flash a 5.0.4/5.1 one with data / cache / dalvik wipe before and / or after
Note: Some of the flashing tries were ROM only, others were ROM + Gapps (and + SuperSU in some cases).
Basically I've tried many combinations of flashing and the freaky phone just hangs on first boot (and yes I've waited more than 20 minutes for the phone to boot and it doesn't pass the animation screen).
However... If I flash any KitKat ROM the phone boots perfectly fine!
I'd appreciate any help solving this issue as I don't know any KitKat Annonymous Android Addicts Association in my area
I got this log on a first boot logcat-enabled ROM:
Code:
--------- beginning of main
I/lowmemorykiller( 1860): Using in-kernel low memory killer interface
W/auditd ( 1858): type=2000 audit(0.0:1): initialized
I/auditd ( 1858): type=1403 audit(0.0:2): policy loaded auid=4294967295 ses=4294967295
W/auditd ( 1858): type=1404 audit(0.0:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
W/vold ( 1862): type=1400 audit(0.0:4): avc: denied { search } for name="/" dev=mmcblk0p1 ino=2 scontext=u:r:vold:s0 tcontext=u:object_r:efs_file:s0 tclass=dir
--------- beginning of system
I/Vold ( 1862): Vold 2.1 (the revenge) firing up
D/Vold ( 1862): Volume sdcard0 state changing -1 (Initializing) -> 0 (No-Media)
D/Vold ( 1862): Volume sdcard1 state changing -1 (Initializing) -> 0 (No-Media)
D/Vold ( 1862): Volume usbdisk0 state changing -1 (Initializing) -> 0 (No-Media)
I/Cryptfs ( 1862): Check if PFE is activated on Boot
E/Cryptfs ( 1862): Cannot open footer file /efs/metadata for get
E/Cryptfs ( 1862): Error getting crypt footer and key
D/Vold ( 1862): Volume sdcard0 state changing 0 (No-Media) -> 2 (Pending)
D/DirectVolume( 1862): DirectVolume::handlePartitionAdded -> MAJOR 179, MINOR 1, PARTN 1
D/DirectVolume( 1862): DirectVolume::handlePartitionAdded -> MAJOR 179, MINOR 2, PARTN 2
D/DirectVolume( 1862): DirectVolume::handlePartitionAdded -> MAJOR 179, MINOR 3, PARTN 3
D/DirectVolume( 1862): DirectVolume::handlePartitionAdded -> MAJOR 179, MINOR 4, PARTN 4
D/DirectVolume( 1862): DirectVolume::handlePartitionAdded -> MAJOR 179, MINOR 5, PARTN 5
D/DirectVolume( 1862): DirectVolume::handlePartitionAdded -> MAJOR 179, MINOR 6, PARTN 6
D/DirectVolume( 1862): DirectVolume::handlePartitionAdded -> MAJOR 179, MINOR 7, PARTN 7
D/DirectVolume( 1862): DirectVolume::handlePartitionAdded -> MAJOR 259, MINOR 0, PARTN 8
E/DirectVolume( 1862): Partition '/devices/platform/dw_mmc/mmc_host/mmc0/mmc0:0001/block/mmcblk0/mmcblk0p8' has a different major than its disk!
D/DirectVolume( 1862): DirectVolume::handlePartitionAdded -> MAJOR 259, MINOR 1, PARTN 9
E/DirectVolume( 1862): Partition '/devices/platform/dw_mmc/mmc_host/mmc0/mmc0:0001/block/mmcblk0/mmcblk0p9' has a different major than its disk!
D/DirectVolume( 1862): DirectVolume::handlePartitionAdded -> MAJOR 259, MINOR 2, PARTN 10
E/DirectVolume( 1862): Partition '/devices/platform/dw_mmc/mmc_host/mmc0/mmc0:0001/block/mmcblk0/mmcblk0p10' has a different major than its disk!
D/DirectVolume( 1862): DirectVolume::handlePartitionAdded -> MAJOR 259, MINOR 3, PARTN 11
E/DirectVolume( 1862): Partition '/devices/platform/dw_mmc/mmc_host/mmc0/mmc0:0001/block/mmcblk0/mmcblk0p11' has a different major than its disk!
D/DirectVolume( 1862): DirectVolume::handlePartitionAdded -> MAJOR 259, MINOR 4, PARTN 12
E/DirectVolume( 1862): Partition '/devices/platform/dw_mmc/mmc_host/mmc0/mmc0:0001/block/mmcblk0/mmcblk0p12' has a different major than its disk!
D/Vold ( 1862): Volume sdcard0 state changing 2 (Pending) -> 1 (Idle-Unmounted)
D/Vold ( 1862): Volume sdcard1 state changing 0 (No-Media) -> 2 (Pending)
D/DirectVolume( 1862): DirectVolume::handlePartitionAdded -> MAJOR 179, MINOR 9, PARTN 1
D/Vold ( 1862): Volume sdcard1 state changing 2 (Pending) -> 1 (Idle-Unmounted)
I/slim ( 1917): Welcome to Android 5.1.1 / SlimKat Slim-5.1.1.alpha.0.1-UNOFFICIAL-20150509-0944
I/SurfaceFlinger( 1863): SurfaceFlinger is starting
I/SurfaceFlinger( 1863): SurfaceFlinger's main thread ready to run. Initializing graphics H/W...
D/libEGL ( 1863): loaded /system/lib/egl/libEGL_mali.so
I/run-parts( 1869): /data/system: No such file or directory
D/libEGL ( 1863): loaded /system/lib/egl/libGLESv1_CM_mali.so
W/ls ( 1935): type=1400 audit(0.0:5): avc: denied { search } for name="wifi" dev=mmcblk0p10 ino=16399 scontext=u:r:sysinit:s0 tcontext=u:object_r:wifi_data_file:s0 tclass=dir
I/run-parts( 1869): /data/misc/wifi/wpa_supplicant.conf: Permission denied
I/SELinuxLabel( 1937): data is unlabeled, fixing...
W/ls ( 1938): type=1400 audit(0.0:6): avc: denied { getattr } for path="/system/bin/surfaceflinger" dev=mmcblk0p9 ino=24672 scontext=u:r:sysinit:s0 tcontext=u:object_r:surfaceflinger_exec:s0 tclass=file
I/run-parts( 1869): /system/bin/surfaceflinger: Permission denied
D/libEGL ( 1863): loaded /system/lib/egl/libGLESv2_mali.so
I/run-parts( 1869): /system/priv-app/GoogleServicesFramework.apk: No such file or directory
I/SELinuxLabel( 1944): /data relabel starting...
E/ ( 1863): Device driver API match
E/ ( 1863): Device driver API version: 23
E/ ( 1863): User space API version: 23
E/ ( 1863): mali: REVISION=Linux-r3p2-01rel3 BUILD_DATE=Wed Oct 9 21:05:57 KST 2013
I/gralloc ( 1863): using (fd=14)
I/gralloc ( 1863): id = s3cfb
I/gralloc ( 1863): xres = 480 px
I/gralloc ( 1863): yres = 800 px
I/gralloc ( 1863): xres_virtual = 480 px
I/gralloc ( 1863): yres_virtual = 1600 px
I/gralloc ( 1863): bpp = 32
I/gralloc ( 1863): r = 16:8
I/gralloc ( 1863): g = 8:8
I/gralloc ( 1863): b = 0:8
I/gralloc ( 1863): width = 56 mm (217.714279 dpi)
I/gralloc ( 1863): height = 93 mm (218.494629 dpi)
I/gralloc ( 1863): refresh rate = 60.38 Hz
I/run-parts( 1869): SELinux: Loaded file_contexts from /file_contexts
I/run-parts( 1869): SELinux: Skipping restorecon_recursive(/data)
I/SurfaceFlinger( 1863): Using composer version 1.0
I/SurfaceFlinger( 1863): EGL information:
W/SurfaceFlinger( 1863): Ignoring duplicate VSYNC event from HWC (t=0)
I/SurfaceFlinger( 1863): vendor : Android
I/SurfaceFlinger( 1863): version : 1.4 Android META-EGL
I/SurfaceFlinger( 1863): extensions: EGL_KHR_get_all_proc_addresses EGL_ANDROID_presentation_time EGL_KHR_image EGL_KHR_image_base EGL_KHR_image_pixmap EGL_KHR_gl_texture_2D_image EGL_KHR_gl_texture_cubemap_image EGL_KHR_gl_renderbuffer_image EGL_KHR_reusable_sync EGL_KHR_fence_sync EGL_EXT_create_context_robustness EGL_ANDROID_image_native_buffer EGL_ANDROID_recordable
I/SurfaceFlinger( 1863): Client API: OpenGL_ES
I/SurfaceFlinger( 1863): EGLSurface: 8-8-8-8, config=0x60000014
I/SurfaceFlinger( 1863): OpenGL ES informations:
I/SurfaceFlinger( 1863): vendor : ARM
I/SurfaceFlinger( 1863): renderer : Mali-400 MP
I/SurfaceFlinger( 1863): version : OpenGL ES 2.0
I/SurfaceFlinger( 1863): extensions: GL_EXT_debug_marker GL_OES_texture_npot GL_OES_compressed_ETC1_RGB8_texture GL_OES_standard_derivatives GL_OES_EGL_image GL_OES_depth24 GL_ARM_rgba8 GL_ARM_mali_shader_binary GL_OES_depth_texture GL_OES_packed_depth_stencil GL_EXT_texture_format_BGRA8888 GL_EXT_blend_minmax GL_OES_EGL_image_external GL_OES_EGL_sync GL_OES_rgb8_rgba8 GL_EXT_multisampled_render_to_texture GL_EXT_discard_framebuffer GL_OES_get_program_binary GL_ARM_mali_program_binary GL_EXT_shader_texture_lod GL_EXT_robustness GL_OES_depth_texture_cube_map
I/SurfaceFlinger( 1863): GL_MAX_TEXTURE_SIZE = 4096
I/SurfaceFlinger( 1863): GL_MAX_VIEWPORT_DIMS = 4096
E/cutils-trace( 1863): Error opening trace file: No such file or directory (2)
I/SELinuxLabel( 1948): /data relabel complete
D/SurfaceFlinger( 1863): Set power mode=2, type=0 flinger=0x40c82000
I/SELinuxLabel( 1956): /cache relabel starting...
I/run-parts( 1869): SELinux: Loaded file_contexts from /file_contexts
I/run-parts( 1869): SELinux: Skipping restorecon_recursive(/cache)
I/SELinuxLabel( 1959): /cache relabel complete
D/SurfaceFlinger( 1863): SF. shader cache generated - 26 shaders in 48.281040 ms
D/libEGL ( 1955): loaded /system/lib/egl/libEGL_mali.so
D/libEGL ( 1955): loaded /system/lib/egl/libGLESv1_CM_mali.so
D/libEGL ( 1955): loaded /system/lib/egl/libGLESv2_mali.so
E/ ( 1955): Device driver API match
E/ ( 1955): Device driver API version: 23
E/ ( 1955): User space API version: 23
E/ ( 1955): mali: REVISION=Linux-r3p2-01rel3 BUILD_DATE=Wed Oct 9 21:05:57 KST 2013
E/cutils-trace( 1955): Error opening trace file: No such file or directory (2)
E/BootAnimation( 1955): couldn't find audio_conf.txt
W/BootAnimation( 1955): Audio service is not initiated.
D/BootAnimation( 1955): Use save memory method, maybe small fps in actual.
D/BootAnimation( 1955): Use save memory method, maybe small fps in actual.
I was having the same problem for weeks until I stumbled on this post:
http://forum.xda-developers.com/showpost.php?p=60473209&postcount=1106
Attached the PhilZ-kernel for flashing after the concerning PIT-file was flashed successfully. This kernel allows to format the Preload-partition from recovery. This is needed, that you don't stuck in a bootloop, after flashing a custom LolliPop-ROM.
Click to expand...
Click to collapse
I flashed PhilZ kernel, wiped the /pre-load, /data, /system, /cache, flashed another TWRP kernel, then finally successfully flashed cm12.1. I'm not sure why the attached PhilZ failed to flash cm12.1, perhaps the recovery is not updated.
Hope this helps.

Categories

Resources