Hi guys
I'm new to android, I have a SGH-i777, unintentionally I put firmeware the i9000, now when I call the person does not hear me and I hear it.
I've put the firmeware official SGH-i777 but it still gives this problem.
Please, HELP ME.
Anderson.almeida said:
Hi guys
I'm new to android, I have a SGH-i777, unintentionally I put firmeware the i9000, now when I call the person does not hear me and I hear it.
I've put the firmeware official SGH-i777 but it still gives this problem.
Please, HELP ME.
Click to expand...
Click to collapse
Flash an i777 rom with a i777 kernel!
jthatch12 said:
Flash an i777 rom with a i777 kernel!
Click to expand...
Click to collapse
My s2 is the official i777 kernel, which rom should I install?
How so flash? I installed via odin firmeware of the i777
Anderson.almeida said:
My s2 is the official i777 kernel, which rom should I install?
How so flash? I installed via odin firmeware of the i777
Click to expand...
Click to collapse
Does your phone have CWM Recovery?
jthatch12 said:
Does your phone have CWM Recovery?
Click to expand...
Click to collapse
Yes
Anderson.almeida said:
Yes
Click to expand...
Click to collapse
Flash through cwm.
dsmboost said:
Flash through cwm.
Click to expand...
Click to collapse
How does it flash?
Anderson.almeida said:
How does it flash?
Click to expand...
Click to collapse
Lol? Read much?
Download any ROM
Go to cwm and wipe cache
Still on cwm go advance and wipe dalvick
On cwm do a factory reset
Flash your rom
Are you from Brazil?
Sent from my SGH-I777 using xda app-developers app
RatusNatus said:
Download any ROM
Go to cwm and wipe cache
Still on cwm go advance and wipe dalvick
On cwm do a factory reset
Flash your rom
Are you from Brazil?
Sent from my SGH-I777 using xda app-developers app
Click to expand...
Click to collapse
Yes, Rio de Janeiro.
brandonarev said:
Lol? Read much?
Click to expand...
Click to collapse
I know installing a rom, just that my phone still not doin bond.
The connection is muted
Anderson.almeida said:
I know installing a rom, just that my phone still not doin bond.
The connection is muted
Click to expand...
Click to collapse
James Bond?
Phalanx7621 said:
James Bond?
Click to expand...
Click to collapse
KKKKKKKKKKKKKKKK
no no, I can not make connection, my s2 is muted. Apart from that the rest is good.
Can you help?
You can put the official kernel and a rom?
Thaaanks
My Android Galaxy s2 i9100 Hacked
I have installed 4.2.1 in my galaxy s2 i9100 … and it takes more then 2 hours in first starting and still it is not start i take out bettrey and again put the bettrey again it dose not start and also it does not go to recovery mood now i am mad so what i dooo please please guide me i am too upset …my cellphone dosent work and dose not go before or after it is only in starting and starting and starting and never start
Eamil: [email protected]
looking for your response and guidness
You should post this question in the I9100 forums.
Hi guys
Can you send me the link SGH-i777 kernel and a rom for me to test? please
thank you
Anderson.almeida said:
Hi guys
Can you send me the link SGH-i777 kernel and a rom for me to test? please
thank you
Click to expand...
Click to collapse
Try the stickies. You know, those threads you are supposed to read first before posting things that have been answered 1000 times before?
Sent from my Galaxy Nexus
Anderson.almeida said:
I've put the firmeware official SGH-i777 but it still gives this problem.
Please, HELP ME.
Click to expand...
Click to collapse
Did you do a factory reset after installing the factory firmware?
Sent from my SCH-I535
Phalanx7621 said:
James Bond?
Click to expand...
Click to collapse
Rofl....
Sent from my SGH-I777 using xda premium
Sorry about my English.
I do hope you all understand.
Leia os tópicos fixos .
Quando vc TROCA de ROM VC deve, normalmente, fazer um reset de fabrica. Formatar system tb ajuda.
Assim vc deve fazer:
Factory reset
Format system
Flash da ROM
Flash do Gapps
Flash do kernel, mas a ROM já vem com kernel.
Tem tudo na parte do forum chamada Android development do i777.
Para atualizar uma ROM vc deve limpar o cache e dalvick. Alguns devs solicitam factory reset para atualização ( aokp). Outro não solicitam nada mas se tiver problemas sempre faça.
Outra coisa, vc precisa de um aplicativo chamado titanium backup para restaurar seus aplicativos. Nunca restaure nada do sistema(vermelho). Apenas apps.
Pode escolher entre JellyBam(tou usando), aokp, Aocp, Supernexus, Slimbeam, Semi, Shostock.
As duas últimas são roms originais da Samsung, que eu não gosto mas cada um e cada um.
As outras são roms aosp que são as únicas que utilizo. Os apps, kernel de um tipo não funciona no outro.
Escolha uma baseada no 4.12. Utilizei recentemente Aocp e Jellybam.
Se escolher uma ROM aosp vc pode trocar o kernel, embora não seja absolutamente necessário.
Pode escolher entre siyha 4.33 ou 5.11. O 5 e o padrão hoje. Pegue com mic swap para ROMs aosp.
Eu troco apenas para aumentar o volume do som e fazer um underclock mínimo.
Abraço
Pegue TB uma parada chamada aesedai aroma na parte themes and apps do forum i777.
Depois do flash da ROM faca o flash disto e instale o gapps por ai. Não instale apenas os contatos invertidos(preto).
Para organizar melhor coloque tufo numa pasta do seu SD externo.
Baixe TB um negocio chamado kernel cleaner script. Utilize antes do flash e sempre que for trocar de kernel. Utilize quer dizer faça o flash disto antes.
Utilize a busca para achar.
Sent from my SGH-I777 using xda app-developers app
Related
Hi all guys!
I hope i'm writing in the right place...
I have bought last week an HiSense U-970... it's truly powerful althoug it isn't one of the most known brand... i have payed it only 180€.
It has android 4.2.1 with the last updating...
I'm afraid that will not be updated so many times in the future... i think that i can hope just in android 4.3.. not more.. so i would like to install CWM to have ROMs every time updated...
but are there any ROMs ready for it??
i don't know so much about modding so i don't know if i can use other existing ROMs
Thank you :laugh:
Hello , I have this machine also .I am also interested in changing the rom but now I think there is none for this mobile .Thank you.sorry for my English .
Enviado desde mi HS-U970 mediante Tapatalk
Recovery for this device?
cwm for HISENSE U970:http://www.mediafire.com/download/bqavydsq9p3qfdl/recovery.img
ROM FOR HISENSE U970:http://www.mediafire.com/download/wxwes0qyw8s46vs/Superom.zip
you can put screenshots of this rom , please? :thumbup:
Enviado desde mi HS-U970 mediante Tapatalk
kiyo75 said:
you can put screenshots of this rom , please? :thumbup:
Enviado desde mi HS-U970 mediante Tapatalk
Click to expand...
Click to collapse
un par de capturas de pantalla de mi MIUI.
On the battery performance and bugs,that such works?
Enviado desde mi HS-U970 mediante Tapatalk
kiyo75 said:
Que grande!!!!!!
On the battery performance and bugs,that such works?
Enviado desde mi HS-U970 mediante Tapatalk
Click to expand...
Click to collapse
ALL IS GREAT! ONLY BUG, DO NOT SEE THE PC. BUT 'YOU CAN' USE AirDroid. WATCH THE SCREENSHOTS
MIUI ONLINE: http://www.mediafire.com/download/6ru9peyxlxadmjb/supermiui.zip:angel:
Later i will try to install the SUPEROM to see that suchs works.
Greetings.
Enviado desde mi HS-U970 mediante Tapatalk
Enviado desde mi HS-U970 mediante Tapatalk
Hisense U970 export international stock firmware
Before I start i'd like to give props to kiyo75, Thanks man.
Anyways he posted the stock jellybean firmware for the international versions of the phone on an Italian forum...saved my life.
Here is the link that i managed to back up for anyone who messes their phone up:
https://www.dropbox.com/s/g6xe4mgi0...W813.6.02.02.ES00_Revsion5222_export_user.zip
OR
https://drive.google.com/file/d/0B9gjduuMzVR4WWs1LTJ1cGI3MEk/
To install it you basically need two things:
1. Usb Vcom driver (SP_Drivers) found here: http://forum.xda-developers.com/showthread.php?t=2206421
2. SP_Flash_Tool found here: http://mtk2000.ucoz.ru/bb/?8379
Note: Windows 8 drivers (Also works for windows 7) can be found here: (http://forum.gsmhosting.com/vbb/f457/all-mtk-usb-driver-2013_by-gsm-hoque-1670880/)
1. Install the Vcom driver (SP or smartphone driver)
2. restart PC
3. extract the zip file(201308272146_HS-U970_W813.6.02.02.ES00_Revsion5222_export_user.zip)
4.. open the SP flash tool
5. click on file-->open scatter-loading file--->navigate to the folder with the rom files(201308272146_HS-U970_W813.6.02.02.ES00_Revsion5222_export_user)
6. Choose the file MT6589_Android_scatter_emmc
7. Now remove the battery from your phone
8. connect it to the computer MAKE SURE YOU ARE USING A GOOD USB CABLE
9. once the phone is detected press the Download button in the sp flash tool
10. wait till it finishes and a green circle to pop up
11. All done
Tutorial with images for SP flash tool can be found here: http://forum.xda-developers.com/showthread.php?t=1982587
If you run into trouble feel free to comment!
Enjoy!
Thank you.If you want you can go through this forum http://www.darksideteam.com/member.php?action=register&referer=144 I am trying to modify the rom.as I am new to this I gradually yet .Greetings .
How to root
Hi man..
I did root ma phone, but how to install ROM.
Thanx
Em.
USB not gettimg connected
I installed this ROM but when i connected to laptop or to any PC its not showing anything. In my mobile its popping as USB debugging connected, touch to disable debugging mode.
What is the solution for this please help.
simihanie said:
I installed this ROM but when i connected to laptop or to any PC its not showing anything. In my mobile its popping as USB debugging connected, touch to disable debugging mode.
What is the solution for this please help.
Click to expand...
Click to collapse
Yes,this is the solution
tororosso76 said:
ALL IS GREAT! ONLY BUG, DO NOT SEE THE PC. BUT 'YOU CAN' USE AirDroid. WATCH THE SCREENSHOTS
Click to expand...
Click to collapse
---------- Post added at 08:53 AM ---------- Previous post was at 08:41 AM ----------
http://www.darksideteam.com/Tema-ROM-Rom-Hisense-HS-U970-The-Power-Of-Different
Rom Hisense HS-U970 "The Power Of Different"
V1
Deodexada
Zippaling
Busybox
AdAway
Nova Launcher
Quick Boot
Bootanimation DarkSideTeam ProyectoAndroidLibre
Statusbar Gradient
Paquete de iconos Betacons
Cambiada la font (tipo de letra)
Eliminados algunos paquetes de idiomas.
Eliminados los sonidos del obturador de la camara y de grabación de video
V2
RootBrowser
OGBatteryMod (OsamaGhareeb)
Viper4Android FX (VIPER520 mantenido por zhuhang)
Terminal
Modo Ingeniero (sin tener que ingresar el codigo en el dialer)
Modificados mas .png
Eliminadas mas app de Google (si las utilizas las puedes descargar de Google Play)
V3
Todo lo de las anteriores versiones,pero la temática de los iconos cambiados
Añadidos más iconos de bateria en OGBatteryMod
Añadidos mas sonidos de llamada,alarmas,notificaciones
Hisense U939
hi all,sorry if I write the wrong place,I bought this model Hisense U939,android 4.2.2,looking for patches,mods and firmware for this phone,help please would be very grateful to you.
backup needed
rubisco1 said:
Before I start i'd like to give props to kiyo75, Thanks man.
Anyways he posted the stock jellybean firmware for the international versions of the phone on an Italian forum...saved my life.
Here is the link that i managed to back up for anyone who messes their phone up:
https://www.dropbox.com/s/0mavc8pbs...W813.6.02.02.ES00_Revsion5222_export_user.zip
To install it you basically need two things:
1. Usb Vcom driver (SP_Drivers) found here: http://forum.xda-developers.com/showthread.php?t=2206421
2. SP_Flash_Tool found here: http://mtk2000.ucoz.ru/bb/?8379
Note: Windows 8 drivers (Also works for windows 7) can be found here: (http://forum.gsmhosting.com/vbb/f457/all-mtk-usb-driver-2013_by-gsm-hoque-1670880/)
1. Install the Vcom driver (SP or smartphone driver)
2. restart PC
3. extract the zip file(201308272146_HS-U970_W813.6.02.02.ES00_Revsion5222_export_user.zip)
4.. open the SP flash tool
5. click on file-->open scatter-loading file--->navigate to the folder with the rom files(201308272146_HS-U970_W813.6.02.02.ES00_Revsion5222_export_user)
6. Choose the file MT6589_Android_scatter_emmc
7. Now remove the battery from your phone
8. connect it to the computer MAKE SURE YOU ARE USING A GOOD USB CABLE
9. once the phone is detected press the Download button in the sp flash tool
10. wait till it finishes and a green circle to pop up
11. All done
Tutorial with images for SP flash tool can be found here: http://forum.xda-developers.com/showthread.php?t=1982587
If you run into trouble feel free to comment!
Enjoy!
Click to expand...
Click to collapse
plz could you give the link for your backup rom of HS U970 .i would be very thankful to you . i bricked my phone trying to install custom rom .so plz help me
The Official Rom For Hisense U970
There is the link to the official rom for hisense U970 at "needrome.com/download/hisense-u970/"
install it just how rubisco1 explained it thanks btw saved my phone.
Hey there. I've had this device for a couple a days and did all the tasks an android nerd usually does (rooting and installing mods). I had installed gapps stock via twrp and I've noticed that the front facing camera doesn't focus, the pictures come out kinda blurry. I also tried to avoid installing the google camera using gapps aroma but still got the same issue. Could this issue be fixed? Would installing gapps individually without using a .zip file make a difference?
sexxualization said:
Hey there. I've had this device for a couple a days and did all the tasks an android nerd usually does (rooting and installing mods). I had installed gapps stock via twrp and I've noticed that the front facing camera doesn't focus, the pictures come out kinda blurry. I also tried to avoid installing the google camera using gapps aroma but still got the same issue. Could this issue be fixed? Would installing gapps individually without using a .zip file make a difference?
Click to expand...
Click to collapse
Can u tell us what model n firmware ver u have?
mekar07 said:
Can u tell us what model n firmware ver u have?
Click to expand...
Click to collapse
it's 36.0.A.2.109, model number F3211
sexxualization said:
it's 36.0.A.2.109, model number F3211
Click to expand...
Click to collapse
I got same issue but in f3216..the problem solved when u format stock fw but you lost root..
New kernel is ready for XA Ultra, now I need the "boot_S1****.sin" from the last firmware on single and dual sim to extract the Ramdisk. I will not download firmwares just for that. Anyone can send me the files in PM?
rrvuhpg said:
New kernel is ready for XA Ultra, now I need the "boot_S1****.sin" from the last firmware on single and dual sim to extract the Ramdisk. I will not download firmwares just for that. Anyone can send me the files in PM?
Click to expand...
Click to collapse
from xa ultra (F3216) fw 36.0.B.2.109
mekar07 said:
from xa ultra (F3216) fw 36.0.B.2.109
Click to expand...
Click to collapse
Can I install it on my F3211?
sexxualization said:
Can I install it on my F3211?
Click to expand...
Click to collapse
No for two reasons, the first it's for the dual sim devices. The second it's a "sin" file and useless alone.
I asked this file to update the boot.img with the last kernel and probably solve the focus problem.
Now I need the same file from a firmware like the one for your phone (single sim)
I will release the new boot for the dual sim in one or two days.
rrvuhpg said:
No for two reasons, the first it's for the dual sim devices. The second it's a "sin" file and useless alone.
I asked this file to update the boot.img with the last kernel and probably solve the focus problem.
Now I need the same file from a firmware like the one for your phone (single sim)
I will release the new boot for the dual sim in one or two days.
Click to expand...
Click to collapse
If that could fix my focusing issue i'd be so thankful gosh, otherwise i'll have go to back to stock even tho i hate it
mekar07 said:
from xa ultra (F3216) fw 36.0.B.2.109
Click to expand...
Click to collapse
Thank you!
Just released new boot for the XA Ultra Dual Sim, new thread created for all future releases:
http://forum.xda-developers.com/xa-...12-f3216-stock-kernels-built-sources-t3527762
rrvuhpg said:
Thank you!
Just released new boot for the XA Ultra Dual Sim, new thread created for all future releases:
http://forum.xda-developers.com/xa-...12-f3216-stock-kernels-built-sources-t3527762
Click to expand...
Click to collapse
Thank you so much rrvuhpg!!:good:
rrvuhpg said:
Thank you!
Just released new boot for the XA Ultra Dual Sim, new thread created for all future releases:
http://forum.xda-developers.com/xa-...12-f3216-stock-kernels-built-sources-t3527762[/QUOTE
Work for f3213?
Click to expand...
Click to collapse
ayuda
hola buenas tardes yo abri el gestor de arranque de mi sony xperia xa ultra y lo hice root mediante twrp pero ahora mi camara frontal no enfoca se ve borrosa y hay veces que se cierra sola y me manda mensaje de se a detenido la camara mi modelo es el sony xperia xa ultra F3213 alguien que me pueda ayudar a solucionarlo se lo agardeceria mucho
emmanuelcampuzano6 said:
hola buenas tardes yo abri el gestor de arranque de mi sony xperia xa ultra y lo hice root mediante twrp pero ahora mi camara frontal no enfoca se ve borrosa y hay veces que se cierra sola y me manda mensaje de se a detenido la camara mi modelo es el sony xperia xa ultra F3213 alguien que me pueda ayudar a solucionarlo se lo agardeceria mucho
Click to expand...
Click to collapse
Write in English please, if you can't use Google translate at least.
rrvuhpg said:
Thank you!
Just released new boot for the XA Ultra Dual Sim, new thread created for all future releases:
http://forum.xda-developers.com/xa-...12-f3216-stock-kernels-built-sources-t3527762
Click to expand...
Click to collapse
I had the same problem with the front camera not focusing after installing Xposed and rooting. Flashing the previous boot image solved my problem, now the front camera focuses.
There is still an issue with the new kernel, the screen never shuts off and the brightness is always at its maximum
Yooooomi said:
I had the same problem with the front camera not focusing after installing Xposed and rooting. Flashing the previous boot image solved my problem, now the front camera focuses.
There is still an issue with the new kernel, the screen never shuts off and the brightness is always at its maximum
Click to expand...
Click to collapse
I'm really torn in between, could you please tell what have you gained from the new kernel ?
I wanna know if it's worth it.
Talal Tango said:
I'm really torn in between, could you please tell what have you gained from the new kernel ?
I wanna know if it's worth it.
Click to expand...
Click to collapse
The new kernel seems buggy af, to be honest I'm about to try to downgrade to .111 I'll keep in touch if it works. Changing the kernel to the new is not worth imo to answer your question
Talal Tango said:
I'm really torn in between, could you please tell what have you gained from the new kernel ?
I wanna know if it's worth it.
Click to expand...
Click to collapse
You could try this : https://forum.xda-developers.com/xa-ultra/how-to/flashing-xa-ultra-flashtool-t3551319 to downgrade to .111 and then root your phone
Yooooomi said:
You could try this : https://forum.xda-developers.com/xa-ultra/how-to/flashing-xa-ultra-flashtool-t3551319 to downgrade to .111 and then root your phone
Click to expand...
Click to collapse
I really don't need to root the phone but I might as well do it for the heck of it
But all I'm concerned about is the camera quality, low light situations and post processing.
If there's a certain fix to that then I'll root my phone straight away. Cuz let's face it, most of us bought the phone for its camera quality, and sure as hell not for its limited performance.
Talal Tango said:
I really don't need to root the phone but I might as well do it for the heck of it
But all I'm concerned about is the camera quality, low light situations and post processing.
If there's a certain fix to that then I'll root my phone straight away. Cuz let's face it, most of us bought the phone for its camera quality, and sure as hell not for its limited performance.
Click to expand...
Click to collapse
Downgrade it or not to .111 (which seems more stable) root it or not, but if you want to recover camera quality just flash the DRM fix mod here : https://forum.xda-developers.com/crossdevice-dev/sony/xperia-z1-z2-z3-series-devices-drm-t2930672 be sure to download the Z3+ version and it'll sulfate DRM keys that allow noise cancelling, Bravia stuff etc...
20.3.5
https://sourceforge.net/projects/xi...ti_HMK20ProMI9TPro_20.3.5_v11-10.zip/download
20.2.27
https://sourceforge.net/projects/xi...i_HMK20ProMI9TPro_20.2.27_v11-10.zip/download
https://androidfilehost.com/?fid=4349826312261733094
20.2.20 v2
https://sourceforge.net/projects/xi...i_HMK20ProMI9TPro_20.2.20_v11-10.zip/download
https://androidfilehost.com/?fid=4349826312261729740
20.1.21 v3
https://sourceforge.net/projects/xi...i_HMK20ProMI9TPro_20.1.21_v11-10.zip/download
https://androidfilehost.com/?fid=4349826312261709655
20.1.16
https://sourceforge.net/projects/xi...i_HMK20ProMI9TPro_20.1.16_v11-10.zip/download
https://androidfilehost.com/?fid=4349826312261702718
20.1.9
https://sourceforge.net/projects/xi...ti_HMK20ProMI9TPro_20.1.9_v11-10.zip/download
https://androidfilehost.com/?fid=4349826312261697782
20.1.2
https://sourceforge.net/projects/xi...ti_HMK20ProMI9TPro_20.1.2_v11-10.zip/download
https://androidfilehost.com/?fid=4349826312261691681
New links will be posted here.
Downloading, thank you very much!
Camerado said:
9.9.26
https://sourceforge.net/projects/xi...ti_HMK20ProMI9TPro_9.9.26_v11-10.zip/download
https://androidfilehost.com/?fid=1899786940962594246
New links will be posted here.
Click to expand...
Click to collapse
Does this have the Google apps installed and Widevine L1?
Why 9.9.26 doesn't have new font? It's default font is Roboto.
saeedmt88 said:
Why 9.9.26 doesn't have new font? It's default font is Roboto.
Click to expand...
Click to collapse
https://xiaomi.eu/community/index.php?posts/503405
Did a dirty flash from stable xiaomi.eu MIUI 10. Everything works so far.
Hosh Jk said:
Does this have the Google apps installed and Widevine L1?
Click to expand...
Click to collapse
yes, you have both functions, greetings
Camerado said:
9.9.26
https://sourceforge.net/projects/xi...ti_HMK20ProMI9TPro_9.9.26_v11-10.zip/download
https://androidfilehost.com/?fid=1899786940962594246
New links will be posted here.
Click to expand...
Click to collapse
Can you confirm whether the sensors working or not? (proximity, compass etc) no sensor seems to work for me on MiUi 11. Also shows blank page on sensors tab on CPU-Z.
I've dirty flashed from Pie MIUI 10 Xiaomi EU, everything is working fine so far.
Dirty flashed from Android 10 MIUI 10 Xiaomi.eu 10.4.6.0 and WiFi stopped working. Had to clear data and start from scratch.
Still have Widevine L3 and Google Pay doesn't work (which was weird because the last MIUI 10 from Xiaomi.eu has working Google Pay)
Dirty flashed from 10.4.6 xiaomi.eu, everything was smooth but no Brazilian Portuguese available... Just An info for my compatriots..
can this be installed over 10.4.8.0 indian rom ?
thiagodark said:
Dirty flashed from 10.4.6 xiaomi.eu, everything was smooth but no Brazilian Portuguese available... Just An info for my compatriots..
Click to expand...
Click to collapse
Como você fez o flash, pode me ensinar ?
Deadlus said:
Como você fez o flash, pode me ensinar ?
Click to expand...
Click to collapse
What's the problem? What are you running right now?
thiagodark said:
What's the problem? What are you running right now?
Click to expand...
Click to collapse
Im new on Xiami, i've downloaded the zip file, and tryed to flash with Xiaomi tool but it didn't worked.
Im running my MI9T PRO Global Version
maikeru-chan said:
Dirty flashed from Android 10 MIUI 10 Xiaomi.eu 10.4.6.0 and WiFi stopped working. Had to clear data and start from scratch.
Still have Widevine L3 and Google Pay doesn't work (which was weird because the last MIUI 10 from Xiaomi.eu has working Google Pay)
Click to expand...
Click to collapse
Unlocking bootloader I think breaks L1, if you have unlocked bootloader that might be the issue, also might be the variant, I have the Chinese variant and because of Google being blocked in China the phone is L3, not sure if any update will fix this or not
Deadlus said:
Im new on Xiami, i've downloaded the zip file, and tryed to flash with Xiaomi tool but it didn't worked.
Im running my MI9T PRO Global Version
Click to expand...
Click to collapse
Do you have unlocked bootloader?
You can't flash zip file on xiaomi tool, that's for .tgz file... And NEVER SELECT "lock" on that tool... You must select "clean all". NEVER "clean all and lock"... Otherwise, you gonna brick your phone
thiagodark said:
Do you have unlocked bootloader?
You can't flash zip file on xiaomi tool, that's for .tgz file... And NEVER SELECT "lock" on that tool... You must select "clean all". NEVER "clean all and lock"... Otherwise, you gonna brick your phone
Click to expand...
Click to collapse
Eu comprei ontem o aparelho, mas não sei fazer room nele, tem como me ensinar? Pelo discord ou outro app de voz ?
Deadlus said:
Eu comprei ontem o aparelho, mas não sei fazer room nele, tem como me ensinar? Pelo discord ou outro app de voz ?
Click to expand...
Click to collapse
Me manda uma mensagem privada com seu contato...
Having some bugginess with picture in picture on youtube vanced and neflix, anyone else? For Netflix to go into the little screen I need to hold it in recents for like 4 seconds.
Xiaomi EU rom V11.04.0
Download here
Xiaomi eu rom V11.03.0
Download
How to install?
First unlock bootlader? Right? And install custom recovery? Where Custom recovery? I didn't see
RickyFS said:
How to install?
First unlock bootlader? Right? And install custom recovery? Where Custom recovery? I didn't see
Click to expand...
Click to collapse
Yes . Unlock bootloader first
---------- Post added at 11:37 PM ---------- Previous post was at 11:21 PM ----------
RickyFS said:
How to install?
First unlock bootlader? Right? And install custom recovery? Where Custom recovery? I didn't see
Click to expand...
Click to collapse
https://unofficialtwrp.com/twrp-3-3-1-root-redmi-8a-olivelite/
there will be difficulties, write. although I have a bad conversationalist in English))
I did!
Thanks for sharing!
I finally did all the setup and have the latest version of Xiaomi EU stable rom. I will share the steps below.
1 - You need to unlock your phone. I follow these instructions. Note: You may have to wait some hours after your first try to unlock your phone. (Be patient) :cyclops:
2 - Download latest version of stable rom for "xiaomi.eu_multi_HM8A" here
3 - Install the recovery TWRP or Orangefox. In my case(MIUI 11 Global - Unlocked International Version - 32gb/2gb) The touch screen in TWRP didn't work (You can connect a cabled mouse to use), so I used the Orangefox
4 - Open recovery with system write permission and format data in the option that you need to type "yes". In Oragefox it is in the third tab in manage partitions menu > select data > presse format button and type yes
5 - Move/copy the downloaded rom to your phone via windows explorer
6 - Flash latest Xiaomi EU rom
7 - Reboot into system
If you want root your rom, please follow #2 of these instructions.
is this rom 64bit ?
ararat1824 said:
Xiaomi EU rom V11.04.0
Download here
Xiaomi eu rom V11.03.0
Download
Click to expand...
Click to collapse
can we install gcam in it
andreasrexyz said:
is this rom 64bit ?
Click to expand...
Click to collapse
No, the kernel name doesn't have the 64 bit indicator.
Gagan_sharma45 said:
can we install gcam in it
Click to expand...
Click to collapse
Yes, there some tutorials on YouTube. The point of this Rom is remove the aggressive process killing then you can use your phone better.
Redmi 8A desktop does not start after installing EU ROM
Hello. I have such a problem. After installing Xiaomi Poland/EU on Redmi 8A, stable version, the desktop does not start, the "wait a minute" circle keeps spinning. Settings can be entered normally. TWRP Orange Fox R10.1 stable.
Sorry for your english - google translate.
markof75 said:
Hello. I have such a problem. After installing Xiaomi Poland/EU on Redmi 8A, stable version, the desktop does not start, the "wait a minute" circle keeps spinning. Settings can be entered normally. TWRP Orange Fox R10.1 stable.
Sorry for your english - google translate.
Click to expand...
Click to collapse
Just install any launcher on google play and you'll be fine
Ga_hap_la_chanh said:
Just install any launcher on google play and you'll be fine
Click to expand...
Click to collapse
If you can't open Google Play Store due to lack of launcher the alternative way is to download any launcher from apkmirror.com or any other website you trusted from your PC or another phone. After that put the apk launcher file in micro SD Card. Put the micro SD Card in your xiaomi EU ROM phone. In status bar will show notification for the micro SD card you already put. Just click the notification and the file manger automatically will open from there you can find the apk launcher file and install it.
markof75 said:
Hello. I have such a problem. After installing Xiaomi Poland/EU on Redmi 8A, stable version, the desktop does not start, the "wait a minute" circle keeps spinning. Settings can be entered normally. TWRP Orange Fox R10.1 stable.
Sorry for your english - google translate.
Click to expand...
Click to collapse
Amigo que tal buenas noches, Yo tengo el Redmi 8A tambien y me pasaba lo mismo con la 11.0.8 baje a la 11.0.3 y me andubo perfecto luego pase a la 11.0.7 y lo siento mas fluido aunque algunas apps como que no son compatibles no entiendo el porque tambien la instalador de paquetes cambio quiza sea por eso, por cierto salio la 11.0.9 el dia de ayer quiza ya corrigieron ese problema si lo puedes probar y comentarnos seria excelente :good:
Saludos desde Peru
kikuto said:
Thanks for sharing!
I finally did all the setup and have the latest version of Xiaomi EU stable rom. I will share the steps below.
1 - You need to unlock your phone. I follow these instructions. Note: You may have to wait some hours after your first try to unlock your phone. (Be patient) :cyclops:
2 - Download latest version of stable rom for "xiaomi.eu_multi_HM8A" here
3 - Install the recovery TWRP or Orangefox. In my case(MIUI 11 Global - Unlocked International Version - 32gb/2gb) The touch screen in TWRP didn't work (You can connect a cabled mouse to use), so I used the Orangefox
4 - Open recovery with system write permission and format data in the option that you need to type "yes". In Oragefox it is in the third tab in manage partitions menu > select data > presse format button and type yes
5 - Move/copy the downloaded rom to your phone via windows explorer
6 - Flash latest Xiaomi EU rom
7 - Reboot into system
If you want root your rom, please follow #2 of these instructions.
Click to expand...
Click to collapse
i can't go to home screen, always spinning circle
Hi.
I have a redmi 8a Indonesia pcpidmx.
I can flash firmware stock ir india?
Rom downloads: https://xiaomifirmware.com/roms/download-the-latest-official-xiaomi-redmi-8a-roms/
Thank you for this piece
My Samsung Galaxy Tab 3 SM-T110 tablet was obsolete. I decided to install a new rom to have an updated Android:
The problem is that: Once I put the Rom with Odin, when I restart the system (see end of the tutorial) I arrive directly on the recovery mod : (
Here is a video I took to show you :
VID_20221103_114207844.mp4
drive.google.com
Please Help me
Thanks !!!
Polo228 said:
My Samsung Galaxy Tab 3 SM-T110 tablet was obsolete. I decided to install a new rom to have an updated Android:
The problem is that: Once I put the Rom with Odin, when I restart the system (see end of the tutorial) I arrive directly on the recovery mod : (
Here is a video I took to show you :
VID_20221103_114207844.mp4
drive.google.com
Please Help me
Thanks !!!
Click to expand...
Click to collapse
Try flashing stock from recovery mode
$cronos_ said:
Try flashing stock from recovery mode
Click to expand...
Click to collapse
Do you have a tutorial for this, I'm not sure I understand ....
Polo228 said:
Do you have a tutorial for this, I'm not sure I understand ....
Click to expand...
Click to collapse
try downloading stock file with frija (make sure to get csc correct) and flash stock in odin
Is this tutorial correct? (I am French, that's why the tutorial is in French)
Comment flasher la ROM stock en utilisant le mode Fastboot (meilleur guide)
Consultez ce guide didacticiel et apprenez à flasher la ROM stock en utilisant le mode Fastboot ou les commandes Fastboot sur un appareil Android en toute simplicité.
fr.androiddata-recovery.com
$cronos_ said:
try downloading stock file with frija (make sure to get csc correct) and flash stock in odin
Click to expand...
Click to collapse
I do not understand very well...
Polo228 said:
Is this tutorial correct? (I am French, that's why the tutorial is in French)
Comment flasher la ROM stock en utilisant le mode Fastboot (meilleur guide)
Consultez ce guide didacticiel et apprenez à flasher la ROM stock en utilisant le mode Fastboot ou les commandes Fastboot sur un appareil Android en toute simplicité.
fr.androiddata-recovery.com
Click to expand...
Click to collapse
I don't know French, but every Samsung I've had does not have fastboot mode, only download mode since they modified the boot chain.