Not sure If this is the right section but,where can I find the stock files for the fascinate 4g t959 since a wrong kernal was flashed on. Looked all over the internet but to no avail i could not find the stock files. CAn anybody help
Can anyone point me to the firmware .BUMP
T959P Alternative Firmware with TMobile
I fixed mine by flashing it to TMobile Galaxy S 4G:
Created Tar containing the following files fromT959VUVKH2_TMB stock firmware: (T959P to TMobile Galaxy S 4G.tar)
cache.rfs
data.rfs
factoryfs.rfs
modem.bin
zImage
Used the following with Odin
PIT=Hawk_Sidekick_VibrantPlus_831.pit
PDA=T959P to TMobile Galaxy S 4G.tar (created as per above)
Entered Download mode and clicked start and voila my bricked t959p was a TMobile Galaxy S 4g.
After this you can root it with the stock+Voodoo-T959VKH2.tar file. Can't find stock telus files and Kies won't detect the phone after so until someone can provide stock files no going back. Better than a brick though and everything works.
Easy Unlock after rooting too just by searching the NVram dump with a hex editor.
I did the same thing and if anyone knows where I can get a copy of a stock Kernel for the Samsung Fascinate T959P (Telus)
Many Thanks in avance
stock kernal
hey i am also looking for the stock kernal, went here http://forum.xda-developers.com/showthread.php?t=1225593&page=2 bt the download file was giving me a crc error...
So, im using my Verizon phone on AT&T - and talked a dev and he asked to gather the CSC files from a verizon rom - googled and a little confused on how to get this... can someone help? looking to make a csc.tar file so i can flash the ATT ROM and just flash my csc.tar file to make all roms work. thanks
update : I have gotten the stock rom, and extracted and got hidden.img and cache.img... was reading and found out the csc files have something to do with these .img files.
any help would b great
AFTER UPDATING TO KIT KAT MY PHONE LOST SIGNAL
HOW TO FIX
________________
You will need to downgrade your modem firmware
I've have included the MJ4 modem firmware in the download link
simple flash with odin
HOW TO FIX AFTER RESET
------------------------------
If you did like me and reset your phone trying to get signal
before you downgrade the modem make sure your phone is flash
you will not have signal yet so double check your work
then ODIN down to MJ4 modem
HOW TO FIX NO DATA CONNECTION & HFA
--------------------------------
Your phone must be rooted
Use root explorer extract files from note3 carrier.zip
and copy and paste all in carrier folder
reset phone and run profile update
https://www.dropbox.com/s/ef90ey40amadkbs/KIT KAT SIGNAL.rar
(invalid fixed)
WRITNG NEW PRL
------------------------------------
PRL HELPER FROM THE PLAYSTORE
credit to insanecain and Alpineman for his HFA FIX
bremos812 said:
AFTER UPDATING TO KIT KAT MY PHONE LOST SIGNAL
HOW TO FIX
________________
You will need to downgrade your modem firmware
I've have included the MJ4 modem firmware in the download link
simple flash with odin
HOW TO FIX AFTER RESET
------------------------------
If you did like me and reset your phone trying to get signal
before you downgrade the modem make sure your phone is flash
you will not have signal yet so double check your work
then ODIN down to MJ4 modem
HOW TO FIX NO DATA CONNECTION & HFA
--------------------------------
Your phone must be rooted
Use root explorer extract files from note3 carrier.zip
and copy and paste all in carrier folder
reset phone and run profile update
https://www.dropbox.com/s/ef90ey40amadkbs/KIT KAT SIGNAL.rar
credit to insanecain and Alpineman for his HFA FIX
Click to expand...
Click to collapse
the md5 is invalid. Downloaded twice.
sorry
rename it modem.tar.md5 from MJ4modem.tar.md5
bremos812 said:
rename it modem.tar.md5 from MJ4modem.tar.md5
Click to expand...
Click to collapse
I need help. I have a phone with a red x on it and i would love to get this working. The link says that nothing is there.
Shyne888 said:
I need help. I have a phone with a red x on it and i would love to get this working. The link says that nothing is there.
Click to expand...
Click to collapse
I have this file too. I posted it in the development section. if you have an invalid Md5 error, remove the .md5 extention because usually, the file was renamed after and changed the checksum. Not safe to do, because there's no verification, but it works
How can i write 3g data on sprint galaxy note 3 over boost
Yesterday i flash my sprint galaxy note 3 kikat 4.4.2 -mj4 but only have calls and texts with no data, anybody knows how can i write 3g data i already use cdma ws 3.7 and 3.9 doesn't work i know this processes very well since 2009 but kitkat has a lot of problems
galaxys3on3g said:
Yesterday i flash my sprint galaxy note 3 kikat 4.4.2 -mj4 but only have calls and texts with no data, anybody knows how can i write 3g data i already use cdma ws 3.7 and 3.9 doesn't work i know this processes very well since 2009 but kitkat has a lot of problems
Click to expand...
Click to collapse
have you tired using DFS? thats what I use to get 3G working on the S4 and most newer samsung phones.
---------- Post added at 11:56 AM ---------- Previous post was at 11:53 AM ----------
bremos812 said:
AFTER UPDATING TO KIT KAT MY PHONE LOST SIGNAL
HOW TO FIX
________________
You will need to downgrade your modem firmware
I've have included the MJ4 modem firmware in the download link
simple flash with odin
HOW TO FIX AFTER RESET
------------------------------
If you did like me and reset your phone trying to get signal
before you downgrade the modem make sure your phone is flash
you will not have signal yet so double check your work
then ODIN down to MJ4 modem
HOW TO FIX NO DATA CONNECTION & HFA
--------------------------------
Your phone must be rooted
Use root explorer extract files from note3 carrier.zip
and copy and paste all in carrier folder
reset phone and run profile update
https://www.dropbox.com/s/ef90ey40amadkbs/KIT KAT SIGNAL.rar
(invalid fixed)
WRITNG NEW PRL
------------------------------------
PRL HELPER FROM THE PLAYSTORE
credit to insanecain and Alpineman for his HFA FIX
Click to expand...
Click to collapse
dropbox link doesnt work
lost signal after flash to boost
im having something of the same issue ,I tryed in stock and kitkatkiller im on NC5 and every time i flash to boost i loose signal ,i flash back to sprint and its back,i noticed when i flash to sprint my PRL goes to 1 insted of 30030 that i use on my htc one, i have tryed flashing different prls and a old modem dont know witch one it was it wasn't labeled and the one in this poast the link is dead,please help,im upgrading from a htcone o boost that is fulling working and can read everything.
I figured it out.the modem is attached to the esn some how that's all I'm going to say.i had to jump throw 20 hoops to get DFS to work properly also.but I'm fully on boost mobile with my note3 .just some fine tweaks to kitkatkiller and I'll b loving it.
justencase6 said:
I figured it out.the modem is attached to the esn some how that's all I'm going to say.i had to jump throw 20 hoops to get DFS to work properly also.but I'm fully on boost mobile with my note3 .just some fine tweaks to kitkatkiller and I'll b loving it.
Click to expand...
Click to collapse
i have the same thing going on over here what did you do to flash it can you pm me what you did ?
U get 4g lte working to?
Sent from my SM-G900P using Tapatalk
is there anyway to just flash a rom and not update the modem?
justencase6 said:
I figured it out.the modem is attached to the esn some how that's all I'm going to say.i had to jump throw 20 hoops to get DFS to work properly also.but I'm fully on boost mobile with my note3 .just some fine tweaks to kitkatkiller and I'll b loving it.
Click to expand...
Click to collapse
I've had this problem for a while.
After MJ4, no radio seem to work for boost.
The only idea that makes sense to me is the NV items.
I'm no expert, just throwing out an idea.
---------- Post added at 10:20 AM ---------- Previous post was at 10:17 AM ----------
rbebber said:
is there anyway to just flash a rom and not update the modem?
Click to expand...
Click to collapse
a "dirty" flash will do it, but it may come with rom issues.
worse case, just Odin the baseband tar.
what rom did you dirty install? I installed bonsai 1.0 over .5 and it just stayed at the note3 screen. Did you have in upgrade the recovery first, or anything like that? ThaNKS.
rbebber said:
what rom did you dirty install? I installed bonsai 1.0 over .5 and it just stayed at the note3 screen. Did you have in upgrade the recovery first, or anything like that? ThaNKS.
Click to expand...
Click to collapse
Most of the time when your rom wont boot, its a kernel issue.
I dirty flashed Freeza's NH7 rom.
I'm inclined to believe our problems stem from "wifi calling".
It was introduced in NC5 if im not mistaken, & thats when boost Note 3's started to have problems.
I've found an interesting anomaly with the modem issue.
after the MJ baseband, all the newer modems flash APNHLOS to our phones.
not sure just yet what it does, or how its attached to the MEID, but that's my find.
Any ideas?
n900p red x no signal fix
n900p red x no signal fix
got it fixed, even though supersu disabled knox, there was still a security issue. I used titanium backup and searched for knox. then I disabled everything that had to do with knox, instantantly t-mobile pop up.
I have a sprint note 3 with boost mobile sim but when I flash darkwolf pure lite rom everything works but sending text anybody had this issue with Sprint roms or know of a fix
I'm updating my note 3 (n9005) to a custom rom based on note 4. It requires a bootloader update which I've never done before and I know that it can be dangerous to the phone if I do it wrong. I have downloaded Odin 3.09 and "BL_N9005XXUGBOB6.tar.md5" file. Can you please tell me how to flash this BL file through Odin? (Which checkboxes to check and where to put the file between BL, AP, CP, CSC?)
Sir,
Please wait until mods will move this thread to the device specific forum for more relevant answers.
Register an account on XDA for full access.
Stand by
Good luck
i'm in need of the pit file for the sm-j320vpp (verizon prepaid j3). i'm trying to flash a sprint sm-j320p (spint's j3) to sm-j320vpp, however, i'm stuck. the phone failed during the flash using odin. i get the error " volume is to big 5734400 < 6072320" "odin: invalid id ext4 image". the research that i have done on the ext4 error says that i need the pit to correct it. but i can't find it anywhere! I don't want to flash the j3 back to sprint because they dont service my area!
so i guess im S.O.L and need to flash it back to sprint's crappy service?
Hate to tell you bub but you cannot mix Sprint roms with Verizon devices. Even though they are both cdma, the internal hardware is different between the two. Then you get a brick.