LG Optimus L5 E610/E612/E615/E617 Rooting Guide
Introduction:
Q). What is “Rooting” ?
A). “Rooting” your device means obtaining “superuser” rights and permissions to your Android's applications.
Requirements:
1). A completely charged LG Optimus L5 E610/E612/E615/E617.
2). My Root Package (Attached Below)
3). “IS11LG_SystemBackupTest.signed.apk” (Attached Below)
4). LG USB Drivers
EDIT: APK FILE HAS BEEN ADDED TO THE POST. I HAVE NOT ADDED IT TO THE ROOT PACKAGE.
NOTE: Drivers are only available for "MAC OS" and "Windows"
5). This is an extra non-necessary requirement: If incase you run into trouble while rooting your android device, you can install ADB SDK from google's developer website. Hopefully, you won't need it because I have rooted my phone countless times without ADB.
Installation:
The installation part is very easy,
1). Firstly, go to “Play Store” and download and install “ASTRO FILE MANAGER”
2). Next, go to “System Settings” >> “Developer Options” >> “Enable USB Debugging”.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
NOTE: Your mobile should not be connected to the Computer while doing this step. You can connect the phone after USB DEBUG is enabled.
3). Next, go to “System Settings” >> “Security”” >> “Enable Unknown Sources”.
This is to allow the installation of the apk given in the root package.
4). Then copy the apk “IS11LG_SystemBackupTest.signed.apk” in the root package to you SDCARD. You can do this by connecting your Mobile Device in “MTP – Media Sync Transfer Mode”.
5). Now using “ASTRO FILE MANAGER” go to “My Files 2” or “Local Storage 2” and install “IS11LG_SystemBackupTest.signed.apk” into your mobile.
6). Change your mobile connection mode to “Charge Only Mode”.
7). Next you need to open the app after success installation. You will see a message “Hello World”. Now you need to reboot your mobile phone, you can do this by just holding the power button for almost 15 seconds, or you could use the power menu and restart the phone.
NOTE: The app should be kept open while rebooting.
8). Next, When the phone has completely rebooted, you must just run “root.bat” if you are using “Windows” or “root.sh” if you are using “Linux” or “root-mac.sh” if you are using “MAC OS”.
9). Open up your phone after the rooting process and your will find "Superuser" app in your phone. Your phone will be completely rooted.
NOTE: There is no way to unlock the bootloader for LG Optimus L5 E-Series, and hence no custom ROM's available. If I have helped you, kindly consider thanking me. It takes 5 seconds to press the thank button, but a week or so to setup the root package and guide.
NOTE: Most phones after rooting end up with issues with the software. For this after rooting, reset your phone and the root will still be there and all further issues will be resolved.
PS. I have stopped development on LG L5 Series.
UPDATE: Most of the phones now can be rooted/unlocked/flahsed using UNLOCKROOT/UNLOCKBOOTLOADER/UNLOCKFLASH
UPDATE: THE ROOT NO LONGER WORKS ON FIRMWARE 4.X.X
This is a guide written by XxXKINGMAKXxX
XxXKINGMAKXxX said:
5). Now using “ASTRO FILE MANAGER” go to “My Files 2” or “Local Storage 2” and install “IS11LG_SystemBackupTest.signed.apk” into your mobile.
6). Change your mobile connection mode to “Charge Only Mode”.
Click to expand...
Click to collapse
After step5 is completed, we need to do the Step6, Am I correct?
XxXKINGMAKXxX said:
8). Next, When the phone has completely rebooted, you must just run “root.bat” if you are using “Windows” or “root.sh” if you are using “Linux” or “root-mac.sh” if you are using “MAC OS”.
Click to expand...
Click to collapse
When the phone boots back, will the connection mode remain as “Charge Only Mode” or do we need to make it again?
Do we need to extract the archive to any specific folder in PC?
XxXKINGMAKXxX said:
NOTE: There is no way to unlock the bootloader for LG Optimus L5 E-Series, and hence no custom ROM's available.
Click to expand...
Click to collapse
Can we use App2SD or Lind2SD such type of applications to move the apps to SD after rooting this? Or any other tweak to be done? Which is the best app for the moving the apps to SD that works in LG L5 E615?
Thank you so much for your effort.
You are most welcome enjoy the rooted phone, a tip: install BusyBox Pro and RomToolBox Pro and Titanium Backup Pro they will help you alot
Yes you need to do Step 6.
Also, after the APK is installed and RUN, you need to keep the APP open and restart the phone, I forgot to mention that in the guide.
You can use App2SD, you can try rom toolbox pro, it has multiple apps embedded in it, even app2sd modified to work mostly.
Once the phone's connection mode is changed, it will stay the same until u change it [That is if the default settings are not changed]
It's up to u where you want to extract, but the best is to Extract the Package to the DESKTOP
NOTE: The APK file is attached in the GUIDE POST.
XxXKINGMAKXxX said:
Also, after the APK is installed and RUN, you need to keep the APP open and restart the phone, I forgot to mention that in the guide.
Click to expand...
Click to collapse
That means, after the APK is installed and RUN, it will show "hello world", right? At that time we need to restart the phone, correct?
XxXKINGMAKXxX said:
You can use App2SD, you can try rom toolbox pro, it has multiple apps embedded in it, even app2sd modified to work mostly.
Click to expand...
Click to collapse
You mean, no need of any thing process to move the app to SD.Will the option to move the app to SD come automatically after rooting?
I tried my best and all softwares fail to move apps to SDCard, im sorry it wont work
Sent from my LG-E615 using xda premium
Will this disable the sound? I see a video in youtube for rooting LG L5 E610/E612/E617 and some comments were there about sound issue. Like sound is working only when connected to headphone, otherwise some messed up sound only. Have you got chance to verify this?
Thanks.
GG
Is there any way to unroot our phone (LG Optimus E612) once rooted?
---------- Post added at 08:00 AM ---------- Previous post was at 07:56 AM ----------
XxXKINGMAKXxX said:
I tried my best and all softwares fail to move apps to SDCard, im sorry it wont work
Sent from my LG-E615 using xda premium
Click to expand...
Click to collapse
Partition ur SD card using CWM, Use Link2SD to move ur apps to SD card. Before partition ur SD card, Take a backup, because it will format ur SD Card while partioning. google it... you will get step by step guide . . .
Sorry for my english
thank you bro
You have any E612' ROM
t have been root my E612. You have any ROM of E612
There is no boot rom for any E series mobile, lg has yet to release bootrom unlock, or someone here should help me crack it
Sent from my LG-E615 using xda premium
Guyz, this is a modded version of the original root for LG E-Series, it has NO:
1) Sound Issues
2) Dual Sim feature issues - Dual Sim works 100%
Also,
1) You can use LINK2SD to move apps to SDCARD
2) You can unroot your phone --- Easiest way is to use an UNROOTING APP from appstore.
OR You can just put your phone in EDM mode and get a completely stock phone back
Thanx :good:
XxXKINGMAKXxX said:
Guyz, this is a modded version of the original root for LG E-Series, it has NO:
1) Sound Issues
2) Dual Sim feature issues - Dual Sim works 100%
Also,
1) You can use LINK2SD to move apps to SDCARD
2) You can unroot your phone --- Easiest way is to use an UNROOTING APP from appstore.
OR You can just put your phone in EDM mode and get a completely stock phone back
Click to expand...
Click to collapse
thanx for sharing the method bro...i've been looking 4 it...and looking forward to root my phone finally!!
so r u finally able to movve ur apps to sd ...???
sound & dual sim
there is any problm with sounde and dual sim after rotting.
thank you for your great job
I will upload the files, remodded for e610/e612
Sent from my LG-E615 using xda premium
What if Factory reset is performed after ROOTING. Will the phone goes back to a stock phone, ie will the phone get UNROOTED?
I have seen the below method in a site: How true is this?
Hard reset instructions: - When the phone is switched off, press and hold the volume down key + power key with your left hand. - When the LED on the bottom of the phone lights up, release Volume down key + power keys and press and hold the Home key (for about 2 seconds) at the same time. - The phone will turn on and perform a factory reset immediately. - Do not operate your phone for at least a minute, while the hard reset is carried out. - You will be then be able to switch your phone back on.
Difference between hard reset and EDM is simple
Hard reset can be performed if your ROM is alright and not corrupted.
EDM helps flash ROM if in case you cant boot up your phone. It's like, if your bios is itself corrupted, EDM will help restore both bios and device firmware.
Sent from my LG-E615 using xda premium
XxXKINGMAKXxX said:
I tried my best and all softwares fail to move apps to SDCard, im sorry it wont work
Sent from my LG-E615 using xda premium
Click to expand...
Click to collapse
U mean dis method is not working....?
We won't be able to move apps to sd even after dis rooting process....???
Partition the SD card and u can mkve apps to it and have apps on SD card
Sent from my LG-E615 using xda premium
How to Partition...???
XxXKINGMAKXxX said:
Partition the SD card and u can mkve apps to it and have apps on SD card
Sent from my LG-E615 using xda premium
Click to expand...
Click to collapse
Thanx !! :good:
But can u please tell me how can i partition my sd card, so sat i can hav my apss on sd...???
srk.sid said:
Thanx !! :good:
But can u please tell me how can i partition my sd card, so sat i can hav my apss on sd...???
Click to expand...
Click to collapse
Follow this tutorial...
http://forum.xda-developers.com/showthread.php?t=1476121
Related
SORRY GUYS I AM NOT UPDATING THIS THREAD ANYMORE IF U HAVE ANY QUERY LEAVE ME A PM! THANKS
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hi All! After huge search in the forum i found the guides scattered ,so i decided to put it in 1 thread helping all the newbies to install custom rom.
PROCEDURE INVOLVED
1.DOWNGRADING YOUR PHONE TO 2.2
2.ROOTING THE PHONE
3.CUSTOM RECOVERY
4.A2SD SUPPORT (NOT MANDATORY)
5.FINALLY INSTALLING CUSTOM ROM
I WILL GUIDE YOU THROUGH ALL THE PROCESS IN DETAIL
GREAT NEWS : NO NEED DOWNGRADING JUST USE THE APK IN THE LINK AND ROOTING IS DONE IN ANDROID 2.2.1 AND LATER STILL I AM KEEPING THE DOWNGRADING DETAILS IF IT DOESNT WORK FOR SOME
http://forum.xda-developers.com/showthread.php?t=1044765
INSATALLATION PROCEDURE :
here are the procedure to install gingerbread root.
-copy all files from sd card to pc(backup)
-now format sd card fat32
-place the gingerbread apk 1.20 in sd card.
-now enable usb debugging settings-application-development -usb debugging (check the box)
-install gingerbread apk using file manger .
-press root and wait .the phone will reboot if it doesnt wait fr some time and see -if it works if not remove ur battery and reinsert ,switch on check if u have superuser icon in application.
INSTRUCTION ARE PROVIDED IN THE ABOVE LINK TOO AND IF THIS APK ROOT YOUR PHONE THEN NO NEED TO DOWNGRADE AND ROOT USING Z4ROOT AVOID BOTH THE STEPS OF DOWNGRADING AND ROOTING USING Z4ROOT PROCEED WITH INSTALLING CUSTOM RECOVERY
First remove nokia drivers or other phone drivers,nokia pc suite,microsoft visual ++ runtime environments installed in pc
Install lg pc suite http://www.multiupload.com/3YHPSRS4Z0 (NEW PHONE BUYERS WILL BE HAVING PC SUITE IN SD CARD PROVIDED BY LG)
Disable LGE VIRTUAL MODEM in device manager (RIGHT CLICK ON COMPUTER- SELECT MANAGE-DEVICE MANGER-SELECT LGE VIRTUAL MODEM-RIGHT CLICK AND DISABLE)
Download the rom file and keep it in a folder
Download kdz updater http://www.multiupload.com/OZTKT703D5
Extract the KDZ file in a folder
Install msxml
Remove sd card
Change your phone display timeout to maximum (settings-display-screen timeout 30 min) and your pc screen saver to 30 min
Connect ur phone to pc make sure u have usb debugging enabled (settings-application-development-check usb debugging)
Run KDZ_FW_UPD.exe (run as adminstrator)
Select Type:3GQCT | Phone mode: DIAG
Choose kdz file v10B from the option menu (THE FOLDER WHERE U DOWNLOADED THE FILE)
Click launch software update.
Wait for flashing to finish.
After the flashing is over the phone will reboot and if the phone doesnt get switch on just manually switch on the phone pressing the power button.
When the phone boots up just check the version is 2.2 then detach the cable from pc
INCASE IF FLASHING FAILS JUST TRY EMERGENCY/CS EMERGENCY(last option) AND TRY REFLASHING AGAIN
ALERT: Charge ur phone to 100 % and dont forget to disable LGE virtual modem,dont disconnect ur phone from pc until your phone boots up completely . If u want to backup contacts just enter into contacts and press menu-import export-export to sd card(u can restore ur contacts later just the same way choosing import contacts from sd card
FLASHING TIME :5 TO 10 MIN
I WONT BE RESPONSIBLE IF YOUR PHONE GETS BRICK WHILE THE FLASHING PROCESS AS FLASHING PROCESS HAS A HIGH RISK OF BRICKING THE PHONE,BUT IF YOU HAVE FOLLOWED THE INSTRUCTION CAREFULLY THEN EVERYTHING WOULD GO FINE.
FOR BRICKED PHONE CHECK THIS THREAD http://forum.xda-developers.com/showthread.php?t=883314 (BIG THANKS TO ERROR FOR THE GUIDE)
Download z4root from here http://forum.xda-developers.com/showthread.php?t=833953
Turn on mass storage and copy the z4root apk to the root of your sd card
Use file manager and choose the z4root apk and install.
Open z4root from applcation menu and click permanent root.
Now the phone will reboot and it will get rooted check for superuser icon in ur application menu.
IF U FIND THE SUPERUSER ICON IT MEANS YOUR PHONE HAS GOT SUCCESSFULLY ROOTED
INSTALLING ANDROID SDK IN ORDER TO USE ADB
First install JDK and JRE from here http://www.oracle.com/technetwork/java/javase/downloads/index.html (choose your appropriate os)
ANDROID SDK LINK:http://developer.android.com/sdk/index.html (LATEST VERSION r10)
Install ANDROID SDK
Click next
Now it wont show next option to proceed just hit back once and click next again (you will be able to proceed with installation now)
Run android sdk manager(note :Run as Administrator orelse it wont download the packages) it will show various packages available just click cancel.
Click on available packages-android repository-uncheck SDK PLATFORM ANDROID ALL VERSION EXCEPT 2.2(U CAN LATER INSTALL THE VERSION U REQUIRE LATER WHEN U NEED IT)
Click install selected
Click select all and proceed with the installation.(this might take a long time depending on your connectivity)
NOTE:IF YOU DONT RUN AS ADMIN THEN THE INSTALLATION WILL FAIL
INSTALLING CUSTOM RECOVERY
update 7/05/2011: latest thunderg recovery can be found here http://androidforums.com/getitnowmarketing/330813-all-one-recovery-thread.html
UPDATE:13/05/2011 CLOCKWORK V3.1.0.0 LATEST RECOVERY CAN BE OBTAINED VIA ROM MANAGER DIRECTLY.
DOWNLOAD THUNDERG CUSTOM RECOVERY AND FLASH IMAGE FROM HERE http://www.multiupload.com/2XXSX4X2PX (I have provided all recovery in 1 file to save your searching time and prefer custom recovery 1.2. CREDITS GOES TO THE DEVELOPER
If u want to use clockwork recovery check out this thread http://forum.xda-developers.com/showthread.php?t=1024838 (instuction provided in the thread itself)
PROCEDURE TO INSTALL RECOVERY
MOUNT SD CARD
EXTRACT OR UNZIP THE FLASH IMAGE DIRECTLY TO YOUR SD CARD (ROOT OF SD CARD)
EXTRACT OR UNZIP THE RECOVERY IN YOUR PC ITSELF AND COPY IT TO YOUR SD CARD (ROOT OF SD CARD)
UNMOUNT SD CARD AND MAKE SURE USB DEBUGGING IS ENABLED
NOW OPEN COMMAND PROMPT AND RUN AS ADMINISTRATOR (START- ALL PROGRAMS-ACCESORIES-COMMAND PROMPT-RIGHT CLICK AND RUN AS ADMIN)
NOW TYPE IN THE COMMAND PROMT(PRESS ENTER AFTER EACH COMMAND)(JUST COPY AND PASTE,KEYBOARD SHORTCUT WONT WORK)
cd c:\Program Files\Android\android-sdk\platform-tools (by default it should be this only where the sdk is installed)
adb shell
su (it will ask for root permission in your phone screen just allow)
mount -o remount,rw -t yaffs2 /dev/block/mtdblock1 /system
cat /sdcard/flash_image > /system/bin/flash_image
chmod 755 /system/bin/flash_image
mv /system/etc/install-recovery.sh /system/etc/install-recovery.sh.bak (you will get an error just proceed)
mount -o remount,ro -t yaffs2 /dev/block/mtdblock1 /system
flash_image recovery /sdcard/LGp500-recovery-v12.img (note just name the blue marked as the same as your custom recovery name and should end with .img)
reboot recovery
WAIT FOR SOMETIME AND IT WILL BE DONE AND AUTOMATICALLY BOOT INTO RECOVERY.
IF U WANT TO USE CLOCKWORK RECOVERY JUST FLASH THE SIGNED RECOVERY ZIP PROVIDED BY MIK FROM RECOVERY OPTION|NOTE : CLOCKWORK DOES NOT SUPPORT FLASHING EVERY ROM FOR THE TIME BEING
HAPPY FLASHING CUSTOM ROM JUST BOOT INTO CUSTOM RECOVERY
SWITCH OFF THE PHONE
PRESS 3 BUTTON COMBO ( HOME + VOL DOWN +POWER BUTTON )
ADD ON: FOR CHANGING RECOVERY USE THE FLASH RECOVERY IMAGE FROM HERE http://forum.xda-developers.com/showthread.php?t=1065197
get a2sd file here http://forum.xda-developers.com/showthread.php?t=715940 from this thread
boot into recovery
select partition sd card
choose swap size 0 mb,ext partition 512mb (IF U HAVE A LARGER SPACE SD CARD MAKE EXT 1024 MB)
select sd ext2 to ext3 (STABLE TO USE EXT3 PARTITION)
select sd ext3 to ext4(be careful in choosing this option as the rom should support ext 4)
finish with the setup
mount sd card and transfer the a2sd file to sd card
unmount sd card
select install zip from sd card choose the a2sd file and flash
reboot
NOTE: USE A2SD ONLY WHEN YOU HAVE A CLASS 6 SD CARD(RECOMMENDED),U CAN USE IT IN CLASS 4 SD TOO BUT SOMETIMES IT CREATES PERFORMANCE ISSUE IF U DONT HAVE A CLASSS 6 OR HIGHER SD CARD.
HOW TO KNOW THE CLASS OF SD CARD- JUST CHECK ON THE CARD IT MUST BE PRINTED ON A CIRCLE DESIGN, IF U DONT HAVE ANYTHING WRITTEN IT MUST BE CLASS 2 | AVOID USING A2SD IF U HAVE A CLASS 2 SD CARD IT MIGHT RESULT IN BIG PERFORMANCE ISSUE
IF YOU FIND YOUR PHONE INTERNAL SPACE DECREASING IS JUST BECAUSE OF THE DALVIK CACHE.IF YOU WANT TO MOVE DALVIK CACHE TO SD CARD ,OPEN TERMINAL EMULATOR OR ADB AND TYPE
su
a2sd cachesd (move dalvik to sd card)
a2sd cachesdreset (move dalvik to sd card and clears contents of dalvik-cache)
a2sd cachepart (move dalvik to cache partition)
a2sd cachepartreset (move dalvik to cache partition and clears contents of dalvik-cache)
Boot into clockwork recovery.
go to backup and restore -create a backup of your current rom (Note:If already backup has been done then avoid this step, backup created using amonra or thunderg wont support restoring using clockwork)
wipe data/factory reset
wipe cache partition
wipe dalvik cache
mount and storage-format system
go to mount and storage-format sd card
advanced-partition sd card-choose 512 mb (preferable)or 1024 mb (it automatically creates ext 4 partition, class 6/4 is preferred)
mount and storage-mount usb storage (make sure usb debugging is enabled)
copy the rom zip file to the root of your sd card
unmount
install zip from sd card-choose the rom zip and install
flashing takes 3-5 min
reboot
IF U WANT A2SD AND TWEAKS TO BOOST PERFORMANCE CHECK POST 2.TO BE PERFORMED JUST AFTER INSTALLING THE NEW ROM
VOTE TO FRONT PAGE IN ORDER TO HELP THE OTHER NEWBIES AND DONT FORGET TO CLICK THANKS IF MY EFFORT HAD HELPED YOU
SORRY GUYS I AM NOT UPDATING THIS THREAD ANYMORE IF U HAVE ANY QUERY LEAVE ME A PM! THANKS
UNGAZE DATA TO SD AND DALVIK CACHE TO RAM(ITS BUGGY FOR THE TIME BEING SO TRY AT YOUR RISK)
CHK THIS THREAD http://forum.xda-developers.com/showthread.php?p=13049131#post13049131
Patched SQLITE3(libsqlite.so) for 2.2 and 2.3
CHK THIS THREAD http://forum.xda-developers.com/showthread.php?t=1000899
FRANSICOFRANCO PERFORMANCE AND BATTERY TWEAKS
CHK THIS THREAD http://forum.xda-developers.com/showthread.php?t=999064
FOR GETTING BEST RESULTS APPLY THE MODS IN SAME ORDER AS ABOVE AND U WILL GET GREAT RESULTS. BIG THANKS TO THE DEVELOPER FOR THIS MODS AND TWEAKS. READ CAREFULLY THOSE THREADS AND CHECK IF IT WORKS PROPERLY WITH YOUR CUSTOM ROM NOTE: DONT FLASH THIS TWEAKS AND MODS UNTIL YOU ARE SURE THAT IT WILL WORK WITH YOUR ROM AS THE GUIDELINES ARE THERE IN THOSE THREAD
sorry! I am unable to update this thread anymore
don't you think we already have enough guides over here?
Kindly remove the installation of custom recovery via adb. Show it via terminal emulator. Its hassle free and from phone only.
Also attach the recovery 1.2 here. Also guide the user to unzip it.
Also attach darktremor script here.
Sent from Tapatalk
djdhruv said:
don't you think we already have enough guides over here?
Click to expand...
Click to collapse
we did had enough guides but at the end some info kept missing so i decided to make 1
lekhwani said:
Kindly remove the installation of custom recovery via adb. Show it via terminal emulator. Its hassle free and from phone only.
Also attach the recovery 1.2 here. Also guide the user to unzip it.
Also attach darktremor script here.
Sent from Tapatalk
Click to expand...
Click to collapse
thanks for your suggestion i will look into it as whatelse info can be provided and regarding terminal emulator it has been described by eichos quite nicely. So i will see if I want to update that orelse provide the link rather and regarding unzipping it already has been mention to extract the file to sd card
This guide is wonderful, I was just about to post on another thread http://forum.xda-developers.com/showthread.php?t=844483 how they should try an clean it up a lil, it is quite a mess over there. My P509 should be here on 4/20/11, cant wait to get started since I already know it is coming preloaded with 2.2.1(1st time Android user coming from 5 year stint with WinMo). Ive been researching the P509 for about 2 months(4-8 hours a night) here on the Android side of XDA, and it has been a journey, anyway your guide will definately help the average noob, in my case I really appreciate the lessons I got from browsing through the different threads and forums associated with this phone. All in all best guide Ive seen so far really sums it up.
Neat guide. I'd suggest one tiny thing. Its not really mandatory to install the adb. Mentioning that as an optional would keep things clear
blueren said:
Neat guide. I'd suggest one tiny thing. Its not really mandatory to install the adb. Mentioning that as an optional would keep things clear
Click to expand...
Click to collapse
no if u use the pc to install recovery u need it.its mandatory in that case and it even helps a lot in later times to work on a lot of stuff.
well u have option to use terminal emulator too but its to the ppl prefrence
shhbz said:
Hi All! After huge search in the forum i found the guides scattered ,so i decided to put it in 1 thread helping all the newbies to install custom rom.
Click to expand...
Click to collapse
I really would like to believe the above mentioned statement and that you missed my thread [HOWTO] Rooting, Installing - Android SDK, Custom Recovery, Custom ROM's dealing with the same topics except for the fact that we exchanged multiple PM's during your attempt at following the instructions given in my post.
This post feels like an abridged and in certain respects incomplete version of my above mentioned post in most places except for the a2sd part which I chose not to include as certain ROM's include a2sd by default.
Anyway, I appreciate your attempt to help out newbies.
Regards
VTC
Moved to general, has there are some threads already in dev section for help.
Cheers
Hey flashing d new rom, flashes new kernal also or it jst flashes a new rom ?
Sent from my LG-P500
It depends on what the developer has included - a new kernel or stock kernel.
Usually custom ROMs come with a modified kernel because there are improvements compared to the stock one.
Sent from my LG-P500 using XDA App
seriousia said:
Hey flashing d new rom, flashes new kernal also or it jst flashes a new rom ?
Sent from my LG-P500
Click to expand...
Click to collapse
just check the rom u r installing and it must be mention in changelog whether the devleoper has included the kernel or not but most of the time the kernel is included , if u are not satisfied with the kernel rather u can try diffrent kernels available over here in xda
victortangocharlie said:
I really would like to believe the above mentioned statement and that you missed my thread [HOWTO] Rooting, Installing - Android SDK, Custom Recovery, Custom ROM's dealing with the same topics except for the fact that we exchanged multiple PM's during your attempt at following the instructions given in my post.
This post feels like an abridged and in certain respects incomplete version of my above mentioned post in most places except for the a2sd part which I chose not to include as certain ROM's include a2sd by default.
Anyway, I appreciate your attempt to help out newbies.
Regards
VTC
Click to expand...
Click to collapse
sorry to say mr charlie that u have edited a lot of stuff in your post LATER and have put the information correctly in order and describing it properly ,its true that your thread helped me which is this 1 http://forum.xda-developers.com/showpost.php?p=12006447&postcount=61 and the 1 u pointed out but as i said it was scattered and not properly arranged orelse i wouldnt have taken an initiative to write. no harsh feeling it was just my attempt to help others so no use promoting your thread let the newbies decide which they want to follow.
there was minor flaws in your thread which landed me in bricking my phone but but thanks to error for his guide .It was the ultimate saviour for me and for many might be.
i have just put in all information in order and removed unwanted writings.
STILL GOOD TO HEAR U LIKED MY EFFORT
well! the best explained thread for installing custom rom
very well organised,followed it and now using cm7 GREAT
thank you
This is a very useful guide for me who is very new to android. Its always important to have less complicated guide with updated methods every now and then for the newbies. Good work.
A few questions though. How important is it to remove visual C++ from my PC? I can see many versions of it installed on it by default (I never installed it myself). I am afraid removing it might mess up other programs on my PC. Also isn't the default Gingerbread app2sd enough to run apps from the sd card? What additional features does Darktremor have?
sweettaniyaa said:
This is a very useful guide for me who is very new to android. Its always important to have less complicated guide with updated methods every now and then for the newbies. Good work.
A few questions though. How important is it to remove visual C++ from my PC? I can see many versions of it installed on it by default (I never installed it myself). I am afraid removing it might mess up other programs on my PC. Also isn't the default Gingerbread app2sd enough to run apps from the sd card? What additional features does Darktremor have?
Click to expand...
Click to collapse
its not that important as i myself have it installed c++ 2005,2008 but somtimes it might block flashing that why its suggested to do so,as for a2sd many rom has is pre installed but some requires flashing a2sd as for fransisco tweaks it helps in sustaining battery so i am not so worried about it as mik cm7 for me seems to be stable but i am looking forward for ungaze contribution to xda http://forum.xda-developers.com/showthread.php?t=1042828 as using this really makes our phone perform to next level just waiting for his updates..
shhbz said:
its not that important as i myself have it installed c++ 2005,2008 but somtimes it might block flashing that why its suggested to do so
Click to expand...
Click to collapse
I am on windows 7 64bit. I have both 2008 and 2005 in both 64 and 32bit versions installed and updated with all the updates on my PC. What do you reckon I do?
sweettaniyaa said:
I am on windows 7 64bit. I have both 2008 and 2005 in both 64 and 32bit versions installed and updated with all the updates on my PC. What do you reckon I do?
Click to expand...
Click to collapse
using the 32 bit mode is preferable just remove those as it wont hamper any performance on ur pc. it will get automaticallly updated from some software or games while installing so no worries on removing .
thats my recomandation juust follow the thread precisely and vrything would be fine let me know the result
1)Download the latest version of Android SDK (which includes adb executable)
2)If you are installing Android SDK on Windows machine, you also need to install USB driver.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
3)Connect the phone using USB cable and do not enable USB storage mode.
Go to Settings -> Applications -> Development and enable USB debugging.
Make sure you also check install from unknown sources option.
4)Start terminal window on your computer (on Windows: click Start, type “cmd” and press Enter).
5)In the terminal window, navigate to this folder : C:\Program Files (x86)\Android\android-sdk\platform-tools by default.
Check C:\Program Files\Android\android-sdk\platform-tools if you’re using a 32-bit version of Windows.
6)Run the adb devices command and you should see your connected Android device.Enter : adb devices
7)Enter : adb shell pm set-install-location 2
(If this command doesn’t work try using the “old” command: pm setInstallLocation 2)
8)If you want to revert this change later and install apps to the internal storage by default, run this command: adb shell pm set-install-location 0
( 0 represents your device’s internal storage, and is the default. 2 represents the external storage, whether it’s an SD card or USB storage. )
9)If the process is sucessfully completed,you will get a new prompt in the cmd window.Reboot and start moving the apps.
A Warning:Some apps shouldn’t be installed to your SD card and should remain installed on the internal storage. The external storage is unavailable when your Android device is mounted on your computer, so apps that remain running all the time should be left on your internal storage.
PRESS THANKS IF IT HELPED,CHEERS!
Video Link to the tutorial : http://www.youtube.com/watch?v=vjfk9lqmdYo&feature=youtu.be
Sorry noob Q. Does this install to the external SD? it seems it installs to the sdcard folder on the phone.
goro17 said:
Sorry noob Q. Does this install to the external SD? it seems it installs to the sdcard folder on the phone.
Click to expand...
Click to collapse
There is no internal sd card folder, if you see the folder in a file manager it ever means the "external sd card" cause we have no internal (like on the galaxy nexus or sgs3)
Sent from my SK17i running Jelly Bean via CM10
mihahn said:
There is no internal sd card folder, if you see the folder in a file manager it ever means the "external sd card" cause we have no internal (like on the galaxy nexus or sgs3)
Sent from my SK17i running Jelly Bean via CM10
Click to expand...
Click to collapse
I meant internal storage....which every phone has(atleast in sony phones.....IDK abt others).....this is where the apps are installed by default
anivesh93 said:
I meant internal storage....which every phone has(atleast in sony phones.....IDK abt others).....this is where the apps are installed by default
Click to expand...
Click to collapse
Couple more Qs:
1) Just to be clear... the method mentioned above " install app to SD card" means installing to the USB storage in SG S2 right? (I just noticed that this the SONY area...I thought the problem would be universal for all android?)
2) Except for the system apps, can't you just move the apps that you get from the market to the USB storage (SD card folder) by going to setup>applications.....move to SD card ?? I thought going through the setup moved the app files to the USB storage anyway. Then why go through the ADB? Is it just for the convenience of not have to move the apps individually one by one?
3) So, there's no way to install the apps directly to an external SD (miro SD)?
goro17 said:
Couple more Qs:
1) Just to be clear... the method mentioned above " install app to SD card" means installing to the USB storage in SG S2 right? (I just noticed that this the SONY area...I thought the problem would be universal for all android?)
2) Except for the system apps, can't you just move the apps that you get from the market to the USB storage (SD card folder) by going to setup>applications.....move to SD card ?? I thought going through the setup moved the app files to the USB storage anyway. Then why go through the ADB? Is it just for the convenience of not have to move the apps individually one by one?
3) So, there's no way to install the apps directly to an external SD (miro SD)?
Click to expand...
Click to collapse
1)yes,this will move the apps to the external storage...
2)Some apps like the flash player and whatsapp can't be moved to the sd card even if they aren't system apps,this method will move them too..
3)if you enable this method...then apps will be installed to the sd card by default
anivesh93 said:
1)yes,this will move the apps to the external storage...
2)Some apps like the flash player and whatsapp can't be moved to the sd card even if they aren't system apps,this method will move them too..
3)if you enable this method...then apps will be installed to the sd card by default
Click to expand...
Click to collapse
Tried it and seemed as if there was no prob....,but it still installs apps to internal memory...rebooted and retried several times. I installed apps from the playstore....
There were no errors and after downloading ADB from SDK i followed your instructions and typed the following:
adb devices
adb shell pm set-install-location 2 (initially tried setinstalLocation 2, but came up with error)
any idea why its not working?
My phone is SGS2 GT-i9100T
This is a video link to the tutorial : http://www.youtube.com/watch?v=vjfk9lqmdYo&feature=youtu.be
CHEERS!
i did this trick, i cross checked the default install location to 2. it shows fine. but i want to ask that do all the files of an installed program get installed on the sd card? I mean is it complete and full installation of an application on the SD card or some program files will get to internal memory also and rest would be in the sd card?
I factory reset my spice mi-280 android 2.3 version phone and tried this trick, but as i am installing an application, my internal memory is getting filled up little by little as i install more apps.
Some part of the app obviously remains in the internal memory.These are the important files need to start the app and run it without bugs.As you must have seen in the case of games,most of it is transferred to the SD card but some part remains in the internal storage.The tutorial enabled the remaining apps to move part of the installed app to the SD card so as to make space in the internal memory.
Hope it helped.
@anivesh93
Thanks so much for posting this. I am just a regular kind of phone user, without much knowledge on Android, etc.
When I saw on my phone that I could not "get rid of" Facebook I was disappointed with my ST15i.
Don't get me wrong, the phone is far and away better than any other phones I have owned.
I am going to test out your method and see if it will allow me to control apps like I had hoped when I originally bought the phone.
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
P.S. Maybe you could point me in the right direction on my own goals.
{I should note I am not a person who does not try to find out how to do something, but I don't even know the right search terms to begin to look....To crunch through 1000s of replies and guides would get too much}
Would you please take a look at my post and tell me if what I am wanting to do could be even done? I am not looking for a lengthy explanation, just to know that "yes,it can be done" or "no,it can't be done" {unless I am willing to figure out a lot of complicated stuff and most likley brick my phone (which I cannot risk doing }
http://forum.xda-developers.com/showthread.php?t=2146075
@zodoz
Your Mission is quite a good one if it works.
Honestly,I am not sure whether this is possible or not,as I haven't come across this ever.You could try putting this question in front of senior developers,they will be of much help to you than me
anivesh93 said:
Honestly,I am not sure whether this is possible or not,as I haven't come across this ever.
Click to expand...
Click to collapse
I was afraid you might say that
Honestly, it is so easy and inexpensive to switch SIM cards here, that to have 2 numbers to separate work & personal life, seemed a no-brainer.
A new number costs me less than $4.....and gives me access to a 3G network + GPS. No contract. Pay as you go....
I am beginning to take a look at where the overlaps/shares are occuring. It seems to me {in my limited knowledge} that the key here is the actual phone number & possibly, the IMEI #. How to route data by setting up the phone to switch from one set of storage/files/settings to another is not yet apparent...Will keep trying..
Thanks Anivesh
alntiab Essen
@Anivesh
After some reading, it appears what I am trying to accomplish may not be as difficult as I first thought.
I am thinking of a Dual Boot scenario with 2 different Sim + SD combinations...
The OS would basically be 2 slightly different versions of Jelly Bean...
The difference may only end up being coding/setting where info & folders are stored on each SD card...
zodoz said:
@Anivesh
After some reading, it appears what I am trying to accomplish may not be as difficult as I first thought.
I am thinking of a Dual Boot scenario with 2 different Sim + SD combinations...
The OS would basically be 2 slightly different versions of Jelly Bean...
The difference may only end up being coding/setting where info & folders are stored on each SD card...
Click to expand...
Click to collapse
Yeah,the task is simple and will be a revolutionary one when completed....
(Wish I had some knowledge on this )
Trying on CM 10
I used this before I rooted my xperia ray and worked perfectly. Now I just rooted and flashed to CM 10, hope this continues to work( because I saw its actually made for ICS )
L0GAN0 said:
I used this before I rooted my xperia ray and worked perfectly. Now I just rooted and flashed to CM 10, hope this continues to work( because I saw its actually made for ICS )
Click to expand...
Click to collapse
If you watched my video,you would have noticed that I've performed the whole procedure on CM10...
It Works !
anivesh93 said:
If you watched my video,you would have noticed that I've performed the whole procedure on CM10...
It Works !
Click to expand...
Click to collapse
Yup it works indeed. Sorry didn't watched the video my bad.
Anyways thanks
Laptop doesnt detect device
Dear kind sir,
Im a total noob on this. So i apologize if my question offends you.
I've been trying this techic but i couldnt make it work. My laptop can seem to detect my device while in cmd prompt.
Im running a HTC HD2 with ICS 4.0.3, and my laptop is a Win 7 Pro 32 bit.
I've disable the root, enable the USB debugging, Enable ADB over network, and Allow mock location.
However, i failed to find the "Make sure you also check install from unknown sources option" on the Settings -> Applications MENU...
So how do you advice i go about this???
abu amar said:
Dear kind sir,
Im a total noob on this. So i apologize if my question offends you.
I've been trying this techic but i couldnt make it work. My laptop can seem to detect my device while in cmd prompt.
Im running a HTC HD2 with ICS 4.0.3, and my laptop is a Win 7 Pro 32 bit.
I've disable the root, enable the USB debugging, Enable ADB over network, and Allow mock location.
However, i failed to find the "Make sure you also check install from unknown sources option" on the Settings -> Applications MENU...
So how do you advice i go about this???
Click to expand...
Click to collapse
Try finding that option in the security menu in settings or you can google it.It is very easy to find(I am currently on JB and don't remember exactly where it appears in ICS).
Cheers.
This thread will serve as a your go to guide for all things root and mod for the LG G3! This phone has already been rooted thanks to autoprime. The first video will be the root guide. I will be sure to add links to whatever the video is discussing. As soon as bootloader unlock, recovery, and roms arrive there will be videos! If you find this thread useful in any way please click the thumbs up button. Thanks
HOW TO ROOT Verizon LG G3!
HOW TO Enable FREE Wifi Tether Without Provisioning
LG G3 Unboxing and Review
My G3 says the link is invalid when I clicked on it
edit: works on my comp
wifi tether hack video guide added to OP
Is there a tutorial on how to root the G3 via a Mac? This will be my 2nd time rooting but 1st time on a mac if it's even possible.
I'm a foreigner to rooting by the way lol.
The root guide above works with Mac.
Sent from my VS985 4G using XDA Free mobile app
So I'm attempting to root my Verizon G3 and I can't get past an early step.
I download the zip and extracted it to my desktop as instructed. When I open the folder and click the ioroot.bat file, instead of opening the script, I get this error:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Any advice on what's going on?
If I attempt to open the file from the zip without extracting, it will open the script, but when I press "any key to continue", the script flashes some text at the bottom of the window and then closes almost immediately before I can see what it says.
Hoping someone can help me out. I'm somewhat a novice but have rooted many Androids before including Galaxy S3's, Note2's, HTC One M7, HTC Evo and Evo3D. This one's got me perplexed.
Thanks!
cdaniel76 said:
So I'm attempting to root my Verizon G3 and I can't get past an early step.
I download the zip and extracted it to my desktop as instructed. When I open the folder and click the ioroot.bat file, instead of opening the script, I get this error:
Any advice on what's going on?
If I attempt to open the file from the zip without extracting, it will open the script, but when I press "any key to continue", the script flashes some text at the bottom of the window and then closes almost immediately before I can see what it says.
Hoping someone can help me out. I'm somewhat a novice but have rooted many Androids before including Galaxy S3's, Note2's, HTC One M7, HTC Evo and Evo3D. This one's got me perplexed.
Thanks!
Click to expand...
Click to collapse
Looks like you're not in an Administrator account and don't have access to certain folders. I named my computer "Precious" and that account is the Administrator. My path to desktop looks like this:
C:\Precious\Desktop\ioroot
I'm thinking this is your problem and is why tutorials/How-To's for Android adb/fastboot tell you to be at the root folder ie: C:\Android, C:\adb, etc. However, running something like ioroot at the Admin desktop is sufficient.
Any instructions on factory restore from image? (Nandroid)
Sent from my Nexus 5 using XDA Free mobile app
noutoo said:
Any instructions on factory restore from image? (Nandroid)
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2785089
Its not a nandroid back up, but it is a factory image
cdaniel76 said:
So I'm attempting to root my Verizon G3 and I can't get past an early step.
I download the zip and extracted it to my desktop as instructed. When I open the folder and click the ioroot.bat file, instead of opening the script, I get this error:
Any advice on what's going on?
If I attempt to open the file from the zip without extracting, it will open the script, but when I press "any key to continue", the script flashes some text at the bottom of the window and then closes almost immediately before I can see what it says.
Hoping someone can help me out. I'm somewhat a novice but have rooted many Androids before including Galaxy S3's, Note2's, HTC One M7, HTC Evo and Evo3D. This one's got me perplexed.
Thanks!
Click to expand...
Click to collapse
Well it appears there just isnt an ioroot.bat in that folder you extracted. Not really a permissions issue. Maybe you/pc missed a file when you extracted.
Edit: or just add the .bat extension back to the file that seems to be missing. Your other files are showing their extension.
The_Southern_Oracle said:
http://forum.xda-developers.com/showthread.php?t=2785089
Its not a nandroid back up, but it is a factory image
Click to expand...
Click to collapse
I'll try to look into this
Sent from my VS985 4G using XDA Free mobile app
Jiggity Janx said:
Well it appears there just isnt an ioroot.bat in that folder you extracted. Not really a permissions issue. Maybe you/pc missed a file when you extracted.
Edit: or just add the .bat extension back to the file that seems to be missing. Your other files are showing their extension.
Click to expand...
Click to collapse
It's cut off on the right, but the zip included all the files needed for someone wanting to root from a Windows, Mac or Linux machine. The file labeled simply "ioroot" in my picture above is the .bat file. You can see all the way to the right it starts to say "Windows Batch File" before it was cut off by my screen capture. So the file is the .bat file that Windows runs. I also tried your suggestion about adding the .bat to the ioroot file and that didn't work either...
The user profile I am under on this computer IS an administrator profile and I've also tried to "right click - run as administrator" and that didn't work.
I tried downloading the Zip again and that didn't work either. So I'm still stuck with nothing working.
I'll try to do it on a different computer when I get a chance.
Thanks for yall's replies
Is there a listing of apps that are safe to freeze in order to debloat with Titanium Backup anywhere?
Neverender326 said:
Is there a listing of apps that are safe to freeze in order to debloat with Titanium Backup anywhere?
Click to expand...
Click to collapse
http://www.droidviews.com/remove-bloatware-on-verizon-lg-g3-vs985-bloat-app-list/
VZ Tones— com.vzw.hs.android.modlite
VZ Messages— com.verizon.messaging.vzmsgs
VZ Support & Protection— com.asurion.android.verizon.vms
Cloud— com.vcast.mediamanager
NFL Mobile— com.gotv.nflgamecenter.us.lite
Slacker— com.slacker.radio
Visual Voice Mail— com.vzw.vvm.androidclient
VZ Navigator— com.vznavigator.Generic
ISIS Mobile Wallet— com.isis.mclient.verizon.activity
Caller Name ID
VZMobile
Kindle— com.amazon.kindle
Mobile— com.amazon.mShop.android
MP3— com.amazon.mp3
Audible— com.audible.application
IMDb— com.imdb.mobile
Twitter— com.twitter.android
Facebook — com.facebook.katana
Google+ — com.google.android.apps.plus
Music — com.google.android.music
Newsstand— com.google.android.apps.magazines
Youtube— com.google.android.youtube
Click to expand...
Click to collapse
More in-depth talk here:
http://forum.xda-developers.com/ver...oatware-safe-to-disable-t2819370/post54219261
K
How do I do this on a Mac? Ugh!
Got my G3 rooted and tether working with no problems! Thanks @owenbeals
Sent from my VS985 4G using XDA Premium 4 mobile app
Works fine.
Worked. The only (minor) hiccups I had were:
1. I had to use the msi version of the drivers (in the link as well, but not first)
2. At some point the usb connection switched back to MTP so when I was running the BAT file nothing was happening. As soon as I switched the usb connection back to Ethernet, the process kicked right in.
The side-load worked automatically for me (in the video, the demo showed the person having to manually side-load a file). If your pc process shows side-load 100%, just choose the reboot option on phone and finish by installing SuperSU, as the video says, and you are done.
Thanks, this was easy. I can't stand having a phone w/o root.
---------- Post added at 09:07 PM ---------- Previous post was at 08:55 PM ----------
ivanov13 said:
Got my G3 rooted and tether working with no problems! Thanks @owenbeals
Sent from my VS985 4G using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I'm sorry, could you explain what you mean about tethering working? Did you do the mod shown in this thread? Or did it work w/o that? And do you have to reset anything each time?
cdaniel76 said:
It's cut off on the right, but the zip included all the files needed for someone wanting to root from a Windows, Mac or Linux machine. The file labeled simply "ioroot" in my picture above is the .bat file. You can see all the way to the right it starts to say "Windows Batch File" before it was cut off by my screen capture. So the file is the .bat file that Windows runs. I also tried your suggestion about adding the .bat to the ioroot file and that didn't work either...
Click to expand...
Click to collapse
By default, Windows sets "Folder Options" to "Hide file extensions for known file types". As an information security professional, this is the stupidest thing ever. MS is trying to keep their tech support calls down by keeping people from seeing (and also editing/deleting) their file extensions). However, there are plenty of viruses out there that take advantage of this "feature".
My advice to anyone reading this thread (if you haven't already), is to go to Folder Options and uncheck the box that hides file extensions for known file types. Just be careful when renaming files. You'll be fine!!
StormCell said:
How do I do this on a Mac? Ugh!
Click to expand...
Click to collapse
Watch the video, there is a Mac option available
owenbeals said:
This thread will serve as a your go to guide for all things root and mod for the LG G3! This phone has already been rooted thanks to autoprime. The first video will be the root guide. I will be sure to add links to whatever the video is discussing. As soon as bootloader unlock, recovery, and roms arrive there will be videos! If you find this thread useful in any way please click the thumbs up button. Thanks
HOW TO ROOT Verizon LG G3!
HOW TO Enable FREE Wifi Tether Without Provisioning
LG G3 Unboxing and Review
Click to expand...
Click to collapse
IS there an bootloader unlock yet?
Thanks
Hello Everyone
I am starting this thread as a COMPLETE GUIDE FOR YOUR DEVICE which would include almost all aspects for your device.
BASIC ANDROID DEVELOPMENT
REFER TO THIS GUIDE FOR BASIC ANDROID KNOWLEDGE AND DEVELOPMENT PROCESS
ALL ROMS,GUIDES, MODS, TUTORIALS LIST CLICK
ALL ROMS,GUIDES, MODS, TUTORIALS LIST
TABLE OF CONTENTS
1. UNLOCK BOATLOADER
2. ROOT YOUR DEVICE
3. FLASHING TOOLS AND GUIDE
4. DRIVER ISSUES
5. MEMORY PROBLEMS
6. TA BACKUP
7. OFFICIALLY UNLOCK YOUR BOOTLOADER (Not available now)
8. FAQ
9. GUIDES LIST
All Credits to the developers for their tools!
HTML:
I take no responsibility for world wars, broken phones, flying machines,
UFO invasions, bricked phones, dead sd card . If you agree to go ahead with this,
it is your choice and no blame should come to any developer/contributor whatsoever
PREREQUISITE
-USB DEBUGGING
For this guide to work, make sure usb debugging is enabled.
Go to Settings> About>Build Number> tap it 7 times and "Developer Options" should appear in settings.
In Developer Options> Enable USB Debugging.
-USB DRIVERS
For these I suggest use Flashtool. Check Drivers guide below for more information
REFER FAQ
New Method to Root M4 Aqua Dual E2363 *26.1.B.1.85 Found on Locked Bootloader. Please click on new method under Root How to root 5.0 Lollipop with RootkitXperia AND CHECK HIS TWITTER FOR UPDATES
STEP BY STEP NOOB GUIDE FOR TWRP AND ROOTING
BOATLOADER
YOU CAN UNOFFICIALLY UNLOCK YOUR BOOTLOADER HERE
You first need to unlock your bootloader before you can root your device.
@lucaszell for the amazing guide. @Sam205 for pointing it out in M4 Aqua forum
1. Go to Sony Website HERE
2. Choose M2 or M and complete the steps to get your KEY
3. Install Flashtool
4. Go to Settings - About phone - Status
Scroll to down to see serial number. (device name)
Amended for clarifications
1.: Go to the folder where Flashtool is installed. Usually C:/Flashtool
2.: Open the folder named "Custom"
3.: Open the folder named "Mydevices" (if it exists, in my case Flashtool version 0.9.18.4) (You may create if it doesnot)
3b.: In the newer Flashtool, you need to put the folder in "C:\Users\<username>\.flashTool\registeredDevices" in step 3.
That is, if you've picked the default for your flashtool home folder or you can choose manually.
4.: Create A New Folder and Rename the folder with your device code. Refer to Obs2 how to find your device code
5.: Open the folder created previously
6.: Create a new text file and rename it as ulcode
7.: Paste your unlock code and save it in the text file
8.: Open Flashtools and try the BLU option again.
Obs 1: the step #3 I think it depends on your Flashtool version, because it wasn't mentioned at the solution
Obs 2: at the step #4 is mentioned your device code. your device code is showed in the log when you click the button BLU, at the "Current device", after your device model.
Search a line like:
09/045/2015 23:45:08 - INFO - Current device : C2104 - AB100C2DE3 - 1272-4136_R5B - 1269-5420_15.3.A.1.17 - WORLD-a_15.3.A.1.17
in this case, the device code is AB100C2DE3 and this should be the new folder name (step 4)
ROOT
NEW METHOD by @cubeundcube for locked bootloaders
OLDER METHOD
@husam666 Successfully found how to root the device. Please refer HERE
WORKING ON DEVICE MODELS
[E2303, E2353, E2333, E2306]
husam666 said:
TWRP Recovery for M4 Aqua (No gui, command line only)
This is for E2303 I didn't test on other models, feel free to do so but I take no responsibility whatsoever if anything happens
This will disable OTA updates, if you want them back you can flash the FOTA kernel with FlashTool
Confrmed to be working on those variants:
E2303, E2306, E2333, E2353, E2363
Ok here it is thanks to @jeffreyvh kernel we can finally flash zips however we have 3 catches:
1. No GUI (Sony's fault until they provide full sources for our phones, we're stuck here)
2. You have to mount /system, /data and /cache manually (Working on it)
3. No external SD card support (working on it)
No problem? Cool..
Ok here's how to do it:
0. You need unlocked bootloader <-- Click here to see how
1. Download the recovery.img
2. Flash the recovery file with fastboot
Code:
fastboot flash recovery recovery.img
3. Pull the cable turning off your phone.
4. Press the power button + volume down, when the phone vibrates, press the volume down button repetedly.
5. The Sony logo will disappear and you'll get a black screen (It's okay, congrats you've now booted twrp)
Now for the magic:
Connect your cable, make sure you have ADB and drivers installed.
In your terminal or dos window type:
Code:
adb shell
you'll get a prompt like ~ #
type these three commands:
Code:
mount -w /dev/block/platform/7824900.sdhci/by-name/system /system
mount -w /dev/block/platform/7824900.sdhci/by-name/userdata /data
mount -w /dev/block/platform/7824900.sdhci/by-name/cache /cache
Now that you have the partition mounted you can flash your zip files:
We don't have external SD card support so for now we're going to stick with sideload
type:
Code:
twrp sideload
adb shell will exit, it's okay now we can install the zip file like this:
Code:
adb sideload <path_to_zip>
path to zip on your computer without the < >
so if you downloaded superSU on C:\Downloads\SuperSU.zip
you type
Code:
adb sideload C:\Downloads\SuperSU.zip
when you're done type:
Code:
adb reboot
and pull the cable
For Rooting:
Download SuperSU flashable zip from here https://download.chainfire.eu/696/SuperSU
and flash it like explained before
good luck
Special Thanks:
@jeffreyvh
@alby_var
@Hnk1
@zw3n
@S7relok
@dexter93
@babydolll @Sam205
The TWRP team and everyone who made this possible
Download Links:
http://d-h.st/wuGD
XDA:DevDB Information
M4 Aqua TWRP, Tool/Utility for the Sony Xperia M4 Aqua
Contributors
husam666
Version Information
Status: Testing
Created 2015-09-11
Last Updated 2015-09-17
Click to expand...
Click to collapse
Last Updated 22-2-2016
SONY OFFICIAL TOOLS
Sony PC Companion
This tool is officially from Sony and can be used to repair your drive.
You can also use this for your phone backup.
http://support.sonymobile.com/global-en/tools/pc-companion/
It is for those who do not prefer unofficial ways!
EMMA
Refer to it here for instructions and download:
http://developer.sonymobile.com/services/flash-tool/how-to-download-and-install-the-flash-tool/
FLASHTOOL
This tool is used to flash stock/custom kernels/recoveries to your device
Download link
http://www.flashtool.net/downloads.php
Instructions
I found this guide very helpful and thus you can refer it here :
http://forum.xda-developers.com/showthread.php?t=928343
SOME CONSIDERATIONS :
1.Make sure you choose the FTF file for your device or you can risk bricking your phone forever.
At the moment, there are no FTF files so you will need to be patient.
2. Make sure all drivers are properly installed
3. To boot into flashmode/fastboot, you will need to turn off device.Hold volume up OR volume down and then connect your device while holding the volume key.
Volume up would take you to flashmode while volume down would take you to fastboot mode. Remember, you will need fastboot/flashtool drivers before you can flash anything.
here is another guide for you just as reference.
http://forum.xda-developers.com/xperia-l/general/xperia-l-how-to-flash-tool-unlocking-t2337955
However if you have still issues , I can rewrite the guide.
ALL DRIVER PROBLEMS SOLUTIONS
I have seen some posts where users are having difficulty connecting Xperia M4 to their PC or ADB. Therefore, I am writing this guide to help you all.
The guide was prepared using Windows 7 Ultimate but should work with Windows XP and Windows 8.
Firstly, Sony uses a different driver for their Xperia devices and therefore, sometimes you are unable to install drivers for your devices especially for ADB commands.
IF YOU ARE LUCKY
There are few ways to get around to install drivers for your device. The most convenient and easy is you plug in your device and wait for automatic detection of your device. Make sure you have USB connected as MTP in MY XPERIA in SETTINGS of your phone. The device drivers would be automatically installed by Windows update.
METHOD
If suppose you can not install your drivers, connect your xperia and then on your PC, go to My computer > Properties>Device Manager.
You should see an undetected hardware with a yellow exclamation mark over it. Open it and click on update my drivers. Then choose GOOGLE DRIVERS by choosing hard-drive. This should install the drivers for you. If this doesnot work. Try the attachment with the post where the drivers are modified to work with Sony Xperia Devices.
Follow the same steps but this time choose the attachment folder to search for drivers. It might say, the drivers are not verified. Just Ignore it and carry on installing them. You will need to unzip these files.
IF suppose you do not see any exclamation mark while you connect your xperia. Just go to control panel and add new hardware. Select, I will choose my device and then install from hard-disk. Select the folder where you have unzipped the files and you are good to go. The name of new hardware is not important as windows will read the drivers files and install drivers for Xperia.
This will install all drivers for your device. If there are two or more drivers while installing them. Redo the steps and install all of them individually.
Suppose your ADB still doesnot work, then
FOR ADB DRIVERS :
Download the ADB Universal Drivers and connect your device. Then hit install. The ADB drivers will be automatically detected and installed.
Further, if these tricks fail, you can delete the unknown driver from your control panel and then try finding it again by using refresh button(scan for new hardware changes) in device manager.
Another trick is to click on unknown drivers and delete them. Connect your phone and restart your phone. Then scan for new hardware in device manager. The drivers should be installed for your device.
If still there are some problems, I will try to help you out.
DOWNLOAD LINKS
DOWNLOAD GOOGLE DRIVERS FOR MTP/ PC ETC
https://dl-ssl.google.com//android/repository/latest_usb_driver_windows.zip
DOWNLOAD UNIVERSAL ADB DRIVERS HERE :
http://adbdriver.com/upload/AdbDriverInstaller.exe
UPLOADED FILE : Sony Xperia Drivers for ADB.
UPDATE (EASIEST METHOD) :
Use flashtool drivers to install adb/fastboot/flashboot drivers. This is the most simplest and easiest method I have come across lately.
Simply download flashtool
http://www.flashtool.net/index.php
Go to folder where you have downloaded it. Usually C:/flashtool/drivers.
Select the drivers for your particular device. I use universal for all three types of drivers. It is helpful to boot into fastboot/Flashtool before installing the drivers but not necessarily.
FOR LINUX DRIVERS :
(No drivers required)
In your Xperia go to :
Settings > Xperia > usb connectivity > usb connection mode
Select Mass storage mode (MSC) > Press OK
Then plug your phone with your SDCARD inside
Try this guide if that does not work,LINUX DRIVERS GUIDE
Good Luck
Still problem ? Quote me back
IMPORTANT
On windows 8 and above you will need to disable DRIVER VERIFICATION in your windows settings to successfully install your drivers
Memory, Storage and Debloating Problems
INSTRUCTIONS
LIST
SD MAID
ADVANCED TASK KILLER
TITANIUMBACKUP
GREENIFY
HOW TO KEEP RAM CLEAN AND KEEP YOUR PHONE BUTTER SMOOTH :
The phone MUST be fully rooted and all the recommended applications isntalled. They can be easily found on the Google Play. Links are provided for reference. In this guide I have used all the PRO (paid) applications. The Free versions will do fine but It is expected that some options are disabled in the free version. You can help developers by your contribution to their work
ADVANCED TASK KILLER
Advanced task manager is used to kill tasks running in the background.
Add advanced task killer widget to your home screen. Every time you need to kill background applications, just tap it once. This way all the applications in the background are periodically killed and thus, more RAM is available to your system and thus increased performance.
GREENIFY[ROOT]:
This application/system basically looks for applications running in the background. These background processes might slow down system. Furthermore, these increase the battery usage and reduce battery time. Greenify detects the background applications and hibernates them. This not only speeds up the phone but also saves battery.
SICK OF BLOATWARE?
TITANIUM BACKUP [ROOT]
Titanium backup is used for backing up your applications and system files. This can also DELETE applications from your ROM permenantly.
I recommend you make a backup with Titanium backup before uninstalling the files. REMEMBER, IF YOU UNINSTALL A SYSTEM FILE, YOU WILL NEED TO REFLASH YOUR ROM and you will end up in BOOTLOOP.
I will paste a screenshot to tell you which applications can be deleted easily.
OTHER SETTINGS :
Go to your settings>developers tools> background limit> use as less as you want. THIS WILL INCREASE USER EXPERIENCE
HOW TO SWAP EXTERNAL MEMORY & INSTALL AS MANY GAMELOFT GAMES AS YOU WANT
Many of you are having problems installing many games in your internal memory and can only utilise 4 gb of your memory. This means only 3 gameloft games. Thus I will briefly help you with memory issues related to Xperia M4
This one is very easy. Install Folder Mount and it will do the rest. Remember with free version, you can only mount 3 folders. The application is frequently updated and it has great support for Xperia M4.
Basically this application creates a link folder in your SD card which is detected by games automatically once fully setup. It also moves your files into your SD card and this saves your EXTERNAL MEMORY FULLY. You can install as many games or applications and link them to your SD card. Its that simple.
Use App analyzer option to mount folders. Manual folder mounts are not recommended!
Go to app analyzer>Select Game> Creat pair(s)>Move files as well> Mounted
Make sure Folder Mount is ticked green before running games.
INTERNAL MEMORY PROBLEMS
Internal memory not adding up? Unknown files hogging your space.
This can be managed by SD MAID and TITANIUM BACKUP.
With SD Maid, you can free a lot of space. It has many cool features. I use the Corpse finder and System cleaner, App Cleaner.
You may also try app cleaner if you like.
Go to CORPSE FINDER>FIND FILES>DELETE ALL FILES. It will take some time looking for files.
SYSTEMCLEANER>FIND FILES>DELETE ALL FILES. It will take some time looking for files.
TITANIUM BACKUP IS USED TO RELOCATE THE MEMORY THAT IS MISSING.
Titanium backup> MENU > clean up the dalvik cache
This will also give you back some INTERNAL MEMORY BACK.
LIST OF APPS SUCCESSFULLY REMOVED WITHOUT ANY PROBLEMS
Active Clip
Calculator (small app version)
Email
Movie Creator
OfficeSuite
PlayStation Video
Sketch
Small App Framework
Small App Launcher
Small App Widget
Small Apps Manager
Smart Connect
Support
Timer (small apps version)
Touch Block
What's New
Music
Music Visualization Wallpapers
Podcast
Video
Visualiser (has same icon as Sony's Music in Titanium Backup)
Refer Screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
HOW TO MAKE A TA PARTITION BACKUP.
1. Download the latest version of Backup TA from here DOWNLOAD HERE
2. Extract the ZIP file to a folder location of your choosing.
3. Navigate to the folder location of Backup TA.
4. Make sure no other script or application which is using ADB is running.
5. Make sure the device is booted in normal mode (the way you normally use it).
6. Run Backup-TA.bat
7. Read the last paragraph of the license before continuing.
8. Read the information and follow the instructions given by the tool.
Someone pointed out that the script needs root to work.
UNLOCK bootloader from Official Website[ Sony doesnot support unlock bootloader of this device yet
However, Once supported, the following method MUST work!
OFFICIAL SONY WEBSITE TO UNLOCK BOOTLOADER
Please note! It will only be possible to unlock the boot loader for certain releases of this model. You can check if it is possible to unlock the boot loader of your device by checking the service menu.
Open the Contacts app.
Click the menu button in the top right.
Click Settings.
Long press (for about 5 seconds) somewhere in the empty space just above soft key bar, and then release your finger. A button named Enter service code will then appear in the same area (this may take a few tries).
Click Enter service code. A dialler will appear.
Enter *#*#7378423#*#* in the dialler.
Tap Service info > Configuration > Rooting Status. If Bootloader unlock allowed says Yes, then you can continue with the next step. If it says No, or if the status is missing, your device cannot be unlocked(bootloader).
If your bootloader can be unlocked, proceed to the above website and follow the on screen instructions. You do not need to download full adb , just download the platform tools attached with this guide.
FOR MY REFERENCE. IGNORE
Just for my reference. Ignore it
These do not work.
Refer to first post for prerequisites.
ROOT CONFIRMATION
It was false root confirmation. You are more than welcome to try to find which method works for you from the following.
I have few confirmations of root working on Xperia M4 using this tool. Ignore what it says about kitkat or anything. Just make sure you got USB debugging enabled and drivers installed.
http://rootgenius.com/
Other methods that might work.
METHOD 1 (Kitkat/Lollipop. Unlocked/Locked Bootloaders)
This method has been implemented many a times by me and it has yeilded high results on different devices I have worked on.
We will replace the KingUser (chinese app like SuperSu) with SuperSU so you do not need to worry. You can also factory reset in order to be completely certain that no extra scripts are left in your system if you have any doubts about privacy.
1.Install iRoot (also called Vroot) (in chinese). The Chinese version is on 1.83 while the english translated is still on 1.78. Use the Chinese one.
http://www.mgyun.com/
2.Run iRoot app from PC. Wait till it is complete. You will have root with some system cleaner app with King user. Maybe you be successful with full root. Check Root Checker.
METHOD 2
It is also a chinese method and it also has been used by me for few devices. Many people have problems trusting it, but it installs superSU so I think I would not be concerned much. Feel free to try
1.Install KingoRoot
http://www.kingoapp.com/
2. Run the script and see if it helps. Wait about 15 minutes .
METHOD 3
1.After running iRoot for explort, run KingoRoot. Wait about 5-15 minutes as it would go on forever if it is not successful in rooting your device.
2.Close afterwards.
3. Run Iroot and Kingoroot together. Wait till it is restarted and you acquire root with KingUser.
The trick here is the moment, System is being restarted (device), Kingoroot pushes some scripts and together they are a deadly combination.
To GET SUPERSU if you got any other app instead for ROOT
1.Install supersu from market.
2.Update binaries
3.Restart.
Does not work ?
Use Beta SuperSU instead versions 2.48/2.49.
Install apk and try updating binaries.
http://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133
METHOD 4
1.Download towelroot apk.
2.Install and run
Check FAQ
https://towelroot.com/
METHOD 5
SUPERONECLICK ROOT
Check FAQ
http://forum.xda-developers.com/showthread.php?t=803682
METHOD 6
Try the z4root app
Check FAQ
Download here
http://z4root.en.uptodown.com/android/download
METHOD 7
http://www.oneclickroot.com/
Install the programme on the PC and run on screen instructions.
METHOD 8
Download Motochopper and try it
http://forum.xda-developers.com/attachment.php?attachmentid=2004316&d=1369929448
You will need to update SuperSU in these cases as well
METHOD 9
Use DoomLord Tool Kit.
Enable USB debugging and run the script. Start with the latest script v17 and carry on with older version scripts. You may need to update SuperSU/Superuser file to latest 2.49 Beta. Link in FAQ
PLEASE DO NOT MIRROR MY FILES!
NEW:
DooMLoRD_Easy-Rooting-Toolkit_v17_perf-event-exploit.zip
OLD:
DooMLoRD_Easy-Rooting-Toolkit_v16_perf-event-exploit.zip
DooMLoRD_Easy-Rooting-Toolkit_v15_perf-event-exploit.zip
DooMLoRD_Easy-Rooting-Toolkit_v14_perf-event-exploit.zip
DooMLoRD_Easy-Rooting-Toolkit_v13_perf-event-exploit.zip
DooMLoRD_Easy-Rooting-Toolkit_v12_perf-event-exploit.zip
DooMLoRD_Easy-Rooting-Toolkit_v11_perf-event-exploit.zip
FAQ
In some scripts, you might find outdated version of SuperSU and it would not work unless you change the file with the latest SuperSU. Make sure you keep the name of the zip same, for example if the folder contains update, rename superSU 2.48 or 2.49 or2.47 or 2.46 to update as well. If it contains superSU, rename it to SuperSU.zip from supersu beta 2.49Beta etc.
You can find the superSU zip here :
https://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip
https://download.chainfire.eu/740/SuperSU/BETA-SuperSU-v2.49.zip
Guides List
This would contain all the guides for your device. I have added the basic problems already but I hope more users contribute to this thread
ROOTING
ROOT/TWRP
ROOT ALL MODELS
[TUT] BLU, TWRP , ROOT Xperia M4 Aqua [complete step]
ROMS & DEVELOPMENT
Unofficial CyanogenMod 12.1 by ProjectMarshmallow
[BL LOCKED][ROOT]TWRP Touch Recovery for BL locked M4 Aqua
ANDROID OPEN SOURCE G-OS PROJECT
5.0
[RECOVERY] TWRP Touch Recovery for Sony M4 Aqua
[ROM][Flashable ZIP] STOCK FLASHABLE 26.1.A.2.167
[ROM][E2303]Debloated ROM[v0.0.3]
[5.1.1_r26] [UBL] Temasek's Unofficial Build
Aosp 6.0 - e2303 / e2306
[5.0.2] [WIP] AOSP for E2303 [By: Beta Team]
[5.1.1][E2303] AOSP by Beta Team [WIP]
[ROM] De-Bloated Stock 5.0 (E2303) LITE VERSION
[RECOVERY] Cyanogen Recovery Touch for Sony M4 Aqua
[STOCK][5.0] Xperia M4 Deodex
REPAIR /BRICKED/RETURN TO STOCK
MEMORY GUIDES
DRIVER GUIDES
OTHERS
Fix Camera Stock Retrieving after installing Xposed
[ROOT] Change CPU temp. limits ("Manage" overheating) (Updated 10/11/15)
[xposed] how to install xposed on rooted m4 aqua
MODS
SOUND MOD STEREO SPEAKERS - V3
BOOT ANIMATION CHANGER
[MOD][5.0][M4 Aq][PORT]TeleService: CallRecorder + Disabled Notification Data Traffic
xperia music mod black dark theme by iandroidx
[THEME][TWRP] DARK TWRP beta by alby_var
Ad Blocking without Root
Please quote me if I have missed any important guide and you think it deserves to be here.
SUGGESTIONS ?
Kindly give your suggestions and your feedback
CONTRIBUTIONS AND MY HEARTY THANKS TO
@husam666 for the first person to root the device and make a working recovery via adb commands @lucaszell for the guidance how to obtain ulcode. @Sam205 for pointing it out in M4 Aqua forum
XperiaRootKit developed by cubeundcube and pointed in the thread by @AndroPlus
@TheShadow523 for his support and providing screenshots of apps list.
IF A MISSED SOMEONE, PLEASE PM ME AND I BE HAPPY TO ADD YOUR NAME
Kingo root doesn't work, and there are security concerns about iRoot/vRoot. I wouldn't recommend either. Towelroot doesn't work on any Lollipop device to the best of my knowledge. SuperOneClick and Z4Root are both for Gingerbread devices, so neither of those are even worth trying.
MetalOllie said:
Kingo root doesn't work, and there are security concerns about iRoot/vRoot. I wouldn't recommend either. Towelroot doesn't work on any Lollipop device to the best of my knowledge. SuperOneClick and Z4Root are both for Gingerbread devices, so neither of those are even worth trying.
Click to expand...
Click to collapse
i tried almost everything... but no method is working for me... if one works i let you know^^
I don't see a prerooted ftf working either, until there is a recovery method for the phone. As far as I know, only a true stock ftf can be flashed using flashtools.
M4Aqua said:
i tried almost everything... but no method is working for me... if one works i let you know^^
Click to expand...
Click to collapse
I will update the SuperSU so it might be helpful. Will update you when I am done with the guides
Very nice work sir, Appreciate it very much.
As I said on other thread, I cant wait for my device to be rooted and get all the blootware away
When any method works, I'll post my feedback right here!
MetalOllie said:
Kingo root doesn't work, and there are security concerns about iRoot/vRoot. I wouldn't recommend either. Towelroot doesn't work on any Lollipop device to the best of my knowledge. SuperOneClick and Z4Root are both for Gingerbread devices, so neither of those are even worth trying.
Click to expand...
Click to collapse
M4Aqua said:
i tried almost everything... but no method is working for me... if one works i let you know^^
Click to expand...
Click to collapse
Desakato said:
Very nice work sir, Appreciate it very much.
As I said on other thread, I cant wait for my device to be rooted and get all the blootware away
When any method works, I'll post my feedback right here!
Click to expand...
Click to collapse
The guide has been completed. It is upto you to try and find an exploit. At the moment, this is your best bet and I have used many methods for recent devices on Lollipop to root my devices and these tools have been successful. At times, you only need to update SuperSU in the script usually. Give them a try and post your valuable feedback.
I hope you are all aware of USB debugging needs to turned on and you have all the latest drivers installed!
If any script can not find your device, it means either USB debugging is turned off or you do not have drivers installed
Hnk1 said:
The guide has been completed. It is upto you to try and find an exploit. At the moment, this is your best bet and I have used many methods for recent devices on Lollipop to root my devices and these tools have been successful. At times, you only need to update SuperSU in the script usually. Give them a try and post your valuable feedback.
I hope you are all aware of USB debugging needs to turned on and you have all the latest drivers installed!
If any script can not find your device, it means either USB debugging is turned off or you do not have drivers installed
Click to expand...
Click to collapse
I know USB debugging has to be enabled. Updating or installing SuperSu is only useful once the device has been rooted. Unfortunately none of the methods posted are capable of doing so. If you post a guide to rooting, it shouldn't be up to me to find the solution; respectfully, it rather defeats the object of "a guide". Some of the methods proposed haven't worked since Gingerbread. Which script are you referring to, and how does one update it to include SuperSu?
MetalOllie said:
I know USB debugging has to be enabled. Updating or installing SuperSu is only useful once the device has been rooted. Unfortunately none of the methods posted are capable of doing so. If you post a guide to rooting, it shouldn't be up to me to find the solution; respectfully, it rather defeats the object of "a guide". Some of the methods proposed haven't worked since Gingerbread. Which script are you referring to, and how does one update it to include SuperSu?
Click to expand...
Click to collapse
I understand your point mate. No offense!
The problem is that I do not own this device, if I had this device or you can provide me an FTF file, maybe I can work something out. For now, you can try these methods. I have successfully rooted LG devices/ Xperia and even samsung using the above 8 methods.
For your other questions, look at this. Also, Sometimes when i was trying to root my device , supersu 2.46 was not able to root it with the same script yet when i replaced it with 2.447 beta. It did
http://forum.xda-developers.com/showpost.php?p=61228366&postcount=6
Hnk1 said:
I understand your point mate. No offense!
The problem is that I do not own this device, if I had this device or you can provide me an FTF file, maybe I can work something out. For now, you can try these methods. I have successfully rooted LG devices/ Xperia and even samsung using the above 8 methods.
For your other questions, look at this. Also, Sometimes when i was trying to root my device , supersu 2.46 was not able to root it with the same script yet when i replaced it with 2.447 beta. It did
http://forum.xda-developers.com/showpost.php?p=61228366&postcount=6
Click to expand...
Click to collapse
FTF files: http://www.xperiablog.net/forum/resources/categories/xperia-m4-aqua.78/
banciii said:
FTF files: http://www.xperiablog.net/forum/resources/categories/xperia-m4-aqua.78/
Click to expand...
Click to collapse
Desakato said:
Very nice work sir, Appreciate it very much.
As I said on other thread, I cant wait for my device to be rooted and get all the blootware away
When any method works, I'll post my feedback right here!
Click to expand...
Click to collapse
MetalOllie said:
I don't see a prerooted ftf working either, until there is a recovery method for the phone. As far as I know, only a true stock ftf can be flashed using flashtools.
Click to expand...
Click to collapse
I have few root confirmations. Check root post for details!
Hnk1 said:
I have few root confirmations. Check root post for details!
Click to expand...
Click to collapse
im at the moment trying to root the phone with geniusroot....
when its finished i give u a response
EDIT: Geniusroot is not working.... still without root^^
M4Aqua said:
im at the moment trying to root the phone with geniusroot....
when its finished i give u a response
EDIT: Geniusroot is not working.... still without root^^
Click to expand...
Click to collapse
Can you post screenshots and you have proper drivers and usb debugging on ?
Have you tried any other method from my guide ? I think first 3 ones should work!
Please provide your feedback
Hi,
Recently i purchased Cube iWork10 Ultimate 64GB Intel Atom x5 Z8300 Quad Core 10.1 Inch Dual OS Tablet and something wrong went with android side, I am not able to use it so i search for official firmware and did not find. I found firmware for tablet SN number start as i15TC,i15TD and i15T.
http://www.cube-tablet.com/download
http://www.51cube.com/ch/DownList.asp?SortID=7
I installed following img on my device
https://forum.xda-developers.com/android/development/rom-stock-cube-iwork-10-flagship-i15-t-t3372281
Camera did not work at all. Second problem i can not change Auto rotate when i want (with game work like it should).
I resize partition by using Phone Flash Tool and X98 serie GPT file
https://4pda.ru/forum/index.php?showtopic=725568
https://techtablets.com/forum/topic/resize-android-partition-the-easy-way-for-x98-serie/
I contact resller (banggood) to provide me official firmware and unfortunately they ignore my email. Then I create new topic in thier site to ask about firmware and got link for firmware but i think i need password in order to download firmware. Here is my topic
http://forum.banggood.com/forum-topic-307419.html
Then i went to http://www.51cube.com/ to check if there is any email to contact them about firmware and i sent couple emails to most of them and unfortunately they ignore my email. I resent the same email and got answer from Eddy with official firmware ( i told Eddy that reseller ignore my email then he provided me link for official firmware).
https://pan.baidu.com/share/link?shareid=467329010&uk=3474489303#list/path=/
to download from pan.baidu.com i follow these step:
https://www.gizdev.com/download-files-pan-baidu-com/
Details about my device:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Anyone have idea how to root firmware for i15-TFL?
I think the correct place for my thread is to put it in xda-developers iwork-10
https://forum.xda-developers.com/t/iwork-10
but i am not able to do that because rules of this forum (to prevent spam, you must have a higher post count in order to make a new thread in this development section.�But feel free to make new thread in the non-development sections like General, Q&A, etc. Thanks for your understanding! )
Thanks in advance
Hello, I`ve met the same problem with same device with unknown revision serial "i15TFL": I`d flashed TWRP and Android stop starting proper.
Have you managed to restore the original Android on your device? Please give me instruction how to do this, and, if you could, post firmware files to Google Drive (Baidoo cloud speed really low).
nm101 said:
Hello, I`ve met the same problem with same device with unknown revision serial "i15TFL": I`d flashed TWRP and Android stop starting proper.
Have you managed to restore the original Android on your device? Please give me instruction how to do this, and, if you could, post firmware files to Google Drive (Baidoo cloud speed really low).
Click to expand...
Click to collapse
I resize partitions and restore the original firmware on my device by using Phone Flash Tool 5.3.4.1 and X98 serie GPT file ( i have chosen gpt_20g_org)& TWRP Boot.
In the android firmware, replace the file gpt.bin
On the computer, install and run the Intel Phone Flash Tool . Click Browse ... , select the flash.json file, in the Configuration: field , set the recover option .
We translate the tablet into DNX FASTBOOT MODE , for this, on the off tablet simultaneously press and hold the On and both volume buttons . USB-cable connect it to the computer, make sure that the program saw it and click Start to flash
The first launch will take a lot of time, be patient
Then i installed window.
Everything worked like it should but without root
I can upload firmware to Google Drive but can not post link coz (To prevent spam on the XDA forums, ALL new users prevented from posting outside links in their messages. After approximately 10 posts, you will be able to post outside links. Thank you for understanding!)
All data will be deleted. Everything you do, you do at your own risk.
Mathias31 said:
I resize partitions and restore the original firmware on my device by using Phone Flash Tool 5.3.4.1 and X98 serie GPT file ( i have chosen gpt_20g_org)& TWRP Boot.
In the android firmware, replace the file gpt.bin
On the computer, install and run the Intel Phone Flash Tool . Click Browse ... , select the flash.json file, in the Configuration: field , set the recover option .
We translate the tablet into DNX FASTBOOT MODE , for this, on the off tablet simultaneously press and hold the On and both volume buttons . USB-cable connect it to the computer, make sure that the program saw it and click Start to flash
The first launch will take a lot of time, be patient
Then i installed window.
Everything worked like it should but without root
I can upload firmware to Google Drive but can not post link coz (To prevent spam on the XDA forums, ALL new users prevented from posting outside links in their messages. After approximately 10 posts, you will be able to post outside links. Thank you for understanding!)
All data will be deleted. Everything you do, you do at your own risk.
Click to expand...
Click to collapse
Thanks.
Please send me link to firmware and utilities using PM or email: "m e l n i k o v s m 2 @ g m a i l . c o m" without spaces. I have no time to wait until it will be downloaded with Baidoo speed (~10kbps). Thanks in advance, you'll seriously help me.
Mathias31 said:
All data will be deleted. Everything you do, you do at your own risk.
Click to expand...
Click to collapse
Even Windows 10 installation will be wiped?
P.S. Send me firmwares GDrive links pleeeaasee.
nm101 said:
Thanks.
Please send me link to firmware and utilities using PM or email: "m e l n i k o v s m 2 @ g m a i l . c o m" without spaces. I have no time to wait until it will be downloaded with Baidoo speed (~10kbps). Thanks in advance, you'll seriously help me.
Click to expand...
Click to collapse
I have sent pm to you with sharing link (android firmware for i15-TFL). Sorry for delayed response
nm101 said:
Even Windows 10 installation will be wiped?
P.S. Send me firmwares GDrive links pleeeaasee.
Click to expand...
Click to collapse
Yea even win 10 will be wiped, you have to re install it. I have sent pm with android firmware link for i15-TFL. I had uploaded to google drive
Thank you wery much. I am even managed to get working Remix OS and Rooted stock Android (I don`t test it, but it should work) images.
How to install:
1. Download this firmware and flash via Intel Platform Flash Tool.
2. Put Rooted stock Android or Remix OS zip into internal memory or sd card.
3. Make sure you had activated "Enable OEM Unlock" in Android Developer`s menu.
4. Boot into recovery (choose android boot then hold Volume Down, in appeared menu choose recovery, device will reboot, then again choose android.. welcome to TWRP).
5. Install zip via TWRP.
Notice: Never never ever upgrade SuperSU APK. After upgrade it`s unable to update binary and stop functioning at all.
Notice: At RemixOS cameras does not work at all.
nm101 said:
Thank you wery much. I am even managed to get working Remix OS and Rooted stock Android (I don`t test it, but it should work) images.
How to install:
1. Download this firmware and flash via Intel Platform Flash Tool.
2. Put Rooted stock Android or Remix OS zip into internal memory or sd card.
3. Make sure you had activated "Enable OEM Unlock" in Android Developer`s menu.
4. Boot into recovery (choose android boot then hold Volume Down, in appeared menu choose recovery, device will reboot, then again choose android.. welcome to TWRP).
5. Install zip via TWRP.
Notice: Never never ever upgrade SuperSU APK. After upgrade it`s unable to update binary and stop functioning at all.
Notice: At RemixOS cameras does not work at all.
Click to expand...
Click to collapse
Np. Thank you for sharing your experience. I knew this method and its for re install android firmware but still have 2 problems I have mentioned it(check out first post) Camera did not work at all. Second problem you can not change Auto rotate when you want (with game work like it should). Also there is video showing how to install RemixOS in our devices, search in youtube ([SL] 043 Cube Iwork 10 Ultimate: How to flash ROM + root + MIUI + play.google + 512mb videocard - YouTube). You can follow the same step to install different img. I tried 6 different img and all of them have the same problem with auto rotate and camera. I resized partions coz android side have just 8 GB and its not enough for my games.
all imgs which i found and img which you provided not for i15-TFL . Its for iWork10_V1 and i15-T
But at rooted android image everything ok with camera and autorotation, after 1 day of RemixOS usage I decided it's better for me to return to stock os, but I also need root permissions. So, my experience is successful, everything still unresolved is sd card unmount during device sleep. But I detected it even on stock image.
nm101 said:
But at rooted android image everything ok with camera and autorotation, after 1 day of RemixOS usage I decided it's better for me to return to stock os, but I also need root permissions. So, my experience is successful, everything still unresolved is sd card unmount during device sleep. But I detected it even on stock image.
Click to expand...
Click to collapse
For me with rooted android img camera & auto rotation. I had problem with sd card mount and unmount and i fixed it by uninstall supersu and install just busybox. Then i decided to resized partions ( 20 GB for android and rest for win) and i used sd in win side to install program&game. To do that search in youtube (Install any Windows programs or applications on microsd card Tech Guy Charlie).
Hello thank you for your Help.
The Root is there and the auto rototion is working.
But i have one problem there, the canera is not working after installing the rom via TWRP.
Is it a bug?
Mathias31 said:
For me with rooted android img camera & auto rotation. I had problem with sd card mount and unmount and i fixed it by uninstall supersu and install just busybox. Then i decided to resized partions ( 20 GB for android and rest for win) and i used sd in win side to install program&game. To do that search in youtube (Install any Windows programs or applications on microsd card Tech Guy Charlie).
Click to expand...
Click to collapse
Do either @Mathias31 or @nm101 have links to the firmware and ROMs which you used to resolve the rotation and camera issues you experienced? I tried the previous links and it looks like they have expired....
denndsd said:
Hello thank you for your Help.
The Root is there and the auto rototion is working.
But i have one problem there, the canera is not working after installing the rom via TWRP.
Is it a bug?
Click to expand...
Click to collapse
Did you get your camera to work? My rotation and camera are not working...
OEM Win10 and Android both (GDrive)
I'd uploaded this one year ago at 4pda (russian forum), but totally forget about this thread.
Also, as I noticed, camera and rotation sensor works right on original firmware only.