Hi all,
It seems my X10 mini pro is completely bricked.
Firstly I root my phone
after that I copied the xrecovery and made a restart, till then everything was rolling smoothly.
I backed up and reseted to factory settings. loaded the new update.zip and after the restart that was needed my phone briked
it's not a common brick. I can't use flashtools to recover it.
here is the problem that appears...
6/030/2013 18:30:20 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_DYNAMIC="SIN header verification failed"
16/030/2013 18:30:20 - ERROR - Error flashing. Aborted
Click to expand...
Click to collapse
phone is not responding to any command. Plus it needs to be turned off if you wanna restore the backup you saved previously...when I try to flash it, phone turns ON
I read many guides in this forum to unbrick it but didn't find anything that suits to my occasion.
If any other detail is missing from my report please ask me to add it.
Sorry for my english
Thanks in advance.
Use SEUS to restore Download from:
SEUS
Dont forget to pull of your battery for 4 seconds, for turn off your phone before connect your phone.
gnickz0r said:
Hi all,
It seems my X10 mini pro is completely bricked.
Firstly I root my phone
after that I copied the xrecovery and made a restart, till then everything was rolling smoothly.
I backed up and reseted to factory settings. loaded the new update.zip and after the restart that was needed my phone briked
it's not a common brick. I can't use flashtools to recover it.
here is the problem that appears...
phone is not responding to any command. Plus it needs to be turned off if you wanna restore the backup you saved previously...when I try to flash it, phone turns ON
I read many guides in this forum to unbrick it but didn't find anything that suits to my occasion.
If any other detail is missing from my report please ask me to add it.
Sorry for my english
Thanks in advance.
Click to expand...
Click to collapse
Press home and power buttons together, it will restart the phone, then start pressing the back-button repeatedly to get back into recovery and restore your previous rom from there. (Come to think of it, following my last paragraph below, you probably don't have recovery on your phone anymore, so, as Rempty mentioned above, repairing with SEUS or PC Companion would be the start to recover your phone to a usable state,.)
The error flashtool gave you is because you didn't unlock the bootloader and didn't change the kernel on your phone. It can't flash any non-sony kernel on a locked bootloader.
What is this 'update.zip' you're talking about? Most full roms have more informational names to distinguish between different zips. An update.zip is usually only for hotfixes to ROMS already flashed, and not a complete ROM.
Thanks a lot guys. I solve my problem with SEUS.
Phone completely formated.
Love you guys
Hey guys I hve instaled xrecovery and minicm9 too on my x10 mini pro I hve wiped chache,etc nd when I reboot , it hangs on SE logo plz help me
SE logo?? You forgot to install nAa kernel, do you unlock bootloader??, remember that minicm9 is not for stock kernel.
Sorry for my bad english
Sent from my iPhone6 using xda business
W'll when I try to unlock the bootloader it gives error can u plz help me
william chauhan said:
W'll when I try to unlock the bootloader it gives error can u plz help me
Click to expand...
Click to collapse
use flash tool to unlock ur bootloader
make sure ur fone is rooted
Sent from my U20i using xda premium
I'm already using flashtool bt it's nt working
william chauhan said:
I'm already using flashtool bt it's nt working
Click to expand...
Click to collapse
What's your phone's build date? Ex.11w37(written on the stick placed on the back )
Sent From My BEAST , I mean X8
My build no. Is 2.1.1.A.0.6
Plzz help me..
Plz help me.. I try to unlock the boot loader .. and the phone bricked !!!! what am i going to do??
i try the PC COMPANION but my phone did not detect it..
this is what i did to bring back life to my x10 mp.
Switch phone completely off then if not already running start pc companion. then this step really got to me because of the phone constantly restarting, to get pc companion to detect the phone, i pressed and held the back key down and connected the usb cable just like flashing a new kernel. pc companion then detected the phone as x10. doesnt matter. then start the update and you must do the same thing again to force update service to detect the phone and to give the option to repair. then once thats done follow the prompts through update service, it will then ask you what phone you have, choose x10 mini pro and update.its a long process but be patient and your phone will work again.
Hey guys I used the flashtool to unlock the bootloader and I also followed the steps too but problem is when the phone was rebooted it didnt read the sim card now what should I do ? Please help
thas911 said:
this is what i did to bring back life to my x10 mp.
Switch phone completely off then if not already running start pc companion. then this step really got to me because of the phone constantly restarting, to get pc companion to detect the phone, i pressed and held the back key down and connected the usb cable just like flashing a new kernel. pc companion then detected the phone as x10. doesnt matter. then start the update and you must do the same thing again to force update service to detect the phone and to give the option to repair. then once thats done follow the prompts through update service, it will then ask you what phone you have, choose x10 mini pro and update.its a long process but be patient and your phone will work again.
Click to expand...
Click to collapse
my phone is in HARD BRICKED.. my phone is dead the phone didnt charge and totally dead.. what should i do?? help me??
i also have a hard bricked,even when i put it to charge the phone its not blink the led
help
Related
hello everyone,
i started rooting my X10,
i followed the instructions in step one, started my x10 in flashmood, pressed enter and the screen began to show messages then when it finished i unpluged my mobile from usb cable and tried to start it but it did not start . i removed the battery , put it again and tried to start it but again it did not start
did everything but the mobile is not responding to anything
even i tried to install a new software but the pc does not identify the mobile anymore, please helpppppppppppppp
is my mobile hardware got burned or is there anything i can do, please
Normally the phone does not get burned! (i don't know anyone who bricked his phone)!
So please try to take out the battery for a least one minute and try to flash via SEUS on another USB-Port!
Regards
Bin4ry
i will try this solution,
thx Bin
Bin4ry said:
Normally the phone does not get burned! (i don't know anyone who bricked his phone)!
So please try to take out the battery for a least one minute and try to flash via SEUS on another USB-Port!
Regards
Bin4ry
Click to expand...
Click to collapse
by this , do u mean Sony Ericsson PC companion ? cuz the main problem is still the same, the pc does not identify that there is a mobile connected via USB port so how can i flash it?
firstly you dont mean rooting do you - rooting doesnt require flashing
you're installing bin4ry's 2.1 rom ?
you will need flash mode to do this so im sure you know how to do it.
if you still cant get the x10 to boot back up, make sure it's got plenty of charge then use SEUS to Repair it - you should still be able to get into flash mode to do this
all of this is not working, i think i might got a virus while using seus or the hardware got a problem
Hello frend's i am new in this forum ,
i did a big mistake first i rooted my xperia 10mini and use 2.2 rom then i try to recover my phone in original version 2.1 . When i try and restart my phone and press back button it's goes to recovery mode not automatically recovered so i delete from c drive recovery.tar file and two more file now my phone is stuck on lobo of android doll. What to do i son't know please help me my phone is going to die.
Easy get seus and reflash your phone stock or boot into recovery ,,, using charging phone power on phone unplug charger use a back up ,,if you can't start again rember to do back ups
saurabh12311 said:
Hello frend's i am new in this forum ,
i did a big mistake first i rooted my xperia 10mini and use 2.2 rom then i try to recover my phone in original version 2.1 . When i try and restart my phone and press back button it's goes to recovery mode not automatically recovered so i delete from c drive recovery.tar file and two more file now my phone is stuck on lobo of android doll. What to do i son't know please help me my phone is going to die.
Click to expand...
Click to collapse
thanks again slade 87 ,sent from x10 mini pro cm7 15.0 ,,,,also on you tube (totalchris08) xbox360 (kormatoes ne5 ) ps3 (langtoes) ask my anything , I COULD KNOW THE ANSER OR I MIGHT NOT ,
still hanging in death rope
thanks 4 reply but my phone is even not going to switch off . again & again it'll starts and cyanogen logo is came the phone starts and this type msg showing which is stick until phone start again SORRY THE APPLICATION LAUNCH PRO()
PROCESS ANDROID.PROCESS.ACORE)HAS STOPPED UNXPECTALY.PLEASE TRY AGAIN
PLEASE HELP ME BRO IF ANY OTHER PROCESS IS THERE TO RECOVER MY PHONE PLEASE TELL ME IN DETAIL IF U HAVE ANY VIDEO THEN SEND ME A LINK PLZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZ
Ooooooo you have a mini ,,,not pro ok you got the rong rom ok there is a hard reset. http://www.youtube.com/watch?v=2cvExle8S4o&feature=youtube_gdata_player
saurabh12311 said:
thanks 4 reply but my phone is even not going to switch off . again & again it'll starts and cyanogen logo is came the phone starts and this type msg showing which is stick until phone start again SORRY THE APPLICATION LAUNCH PRO()
PROCESS ANDROID.PROCESS.ACORE)HAS STOPPED UNXPECTALY.PLEASE TRY AGAIN
PLEASE HELP ME BRO IF ANY OTHER PROCESS IS THERE TO RECOVER MY PHONE PLEASE TELL ME IN DETAIL IF U HAVE ANY VIDEO THEN SEND ME A LINK PLZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZZ
Click to expand...
Click to collapse
,sent from x10 mini pro cm7 15.0 ,,,,also on you tube (totalchris08) xbox360 (kormatoes ne5 )
I DID ALL SUCH THINGS BUT NOTHING GO RIGHT 4 ME IS THERE ANY OTHER SOLUTION ,I READ ABOUT FLASHTOOL IN FORUM CAN U PLZ EXPLAIN IF BY THIS I CAN DO SOMTHING BUT PLZ EXPLAIN IN DETAIL
I had the same issue it restarts by itself n go into looping, remove the battery place it back, connect ur phone to SEUS by holding back button and plugging the USB
xperia mini10
in mini 10 battery is not removable & my basic operating files are deleted show when there is no operating file how it'll starts a home screen thats y i m asking u and other frend's is there any other method to re install operating 2.1 or any thing to start my phone again so i can do after that any thins otherwise nothing is worth 4 me saddddddddddddd
If your recovery (xrecovery or clockwordmod) works fine, what about removing your SD and plug it to a PC in order to copy a 2.1 ROM and then install it through recovery?
please ell me
plz tell me in which folder i'll put that files , basically allready tried all even my update zip is also there how to do and wht 2 do plz explain is there any method to recover from sdcard or through any other software
is there xrecovery file work from pc do u have exe file so plz sen me
[email protected]
is there any method to format c drive of phone bcs when ever i'm trying
through pc companion it'll tell in last stage to use usb storage but y phone is not starting so how could i do this nothing work 4 me plzzzzzzzzzzz any one give me solution I'm very depress my phone is even not going to switch off it'll starts again & again until battery drained
i deleted my three files from c/: x recovery.tar, con. & busy box
saurabh12311 said:
when ever i'm trying through pc companion it'll tell in last stage to use usb storage but y phone is not starting
Click to expand...
Click to collapse
That's weird because 7 hours after i brought my X10 mini pro i already bricked it , so i fire up SE PC companion and i followed the instruction to _repair_ the phone and no access to USB storage was needed that i remember.
It simply downloads and flash to your phone.
Unfortunately i'm still a newbie so i suppose and i haven't all the right answers
Keep trying with SE repairing and good luck with that!
Oops sorry, click the reset button, dnt turn your cell on, press the back button plug in the usb u'll see the green light!
if works then tell me...
ps: u said u deleted ur xrecovery.tar nd cant boot into recovery, how the hell u think u'll be able to install zip from sdcard??? Only way u have is SEUS or try using bin4ry's flashtool, download mini's1.1 rom....
Oops sorry, click the reset button, dnt turn your cell on, press the back button plug in the usb u'll see the green light!
if works then tell me...
ps: u said u deleted ur xrecovery.tar nd cant boot into recovery, how the hell u think u'll be able to install zip from sdcard??? Only way u have is SEUS or try using bin4ry's flashtool, download mini's1.1 rom....
thanks dear but finally my phone is ded I sent my phone to customer center but after checking they told me no hope phone will not recoverd..........
half knowledge is always dangerous is true for me I lost my money
There is no way that seus could not fix your phone and even if it couldnt se has a duty to repair it free of charge in the first 12 months !
Sent from my U20i using XDA Premium App
SEUS wont fail!
galvic said:
SEUS wont fail!
Click to expand...
Click to collapse
Quote that and DON'T THROW IT AWAY. USE flashtool. I got mine bricked and that was a great solution.
If you still have it i'm gonna show you a guide to flashtool
I need to flash my X10 Mini, but I can't find the firmware for It anywhere with a working link. Anyone that still have the file and willing to share?
There are only plenty of links to sites that are down
I tried to install MiniCM7-2.1.9-robyn on the phone and then afterwards it just won't start anymore, so i need to flash it and then use SEUS to restore it.
UPDATE!
I found everything and fixed everything I needed by just flashing It with a stock kernel.
Just use the Repair option in Pc Companion.
Here
leajian said:
Just use the Repair option in Pc Companion.
Click to expand...
Click to collapse
wont work because I can't even get into the menus, I turn it on and It gets stuck on a screen with little backlight, but no SE logo
TrissyGE said:
Here
Click to expand...
Click to collapse
I'm not looking for how to do It..... Read the question before you post. I appreciate you trying to help, but at least understand what the question Is first.
I'm looking for the firmware for the flashtool so I can flash my device (.ftf file)
They guides that teaches you how to fix a bricked phone got links to megaupload (that got shutdown not long ago) and multiupload (also got shutdown) for the firmware I'm looking for.
If you can't turn the phone on, then flashtool won't help you. You have to able to turn the phone on to get to download mode for flashtool, or Pc Companion, or SEUS to do their thing.
If your phone doesn't turn on, you've got a hard brick. Which is bad.
Sent from my U20i using xda premium
Ticklefish said:
If you can't turn the phone on, then flashtool won't help you. You have to able to turn the phone on to get to download mode for flashtool, or Pc Companion, or SEUS to do their thing.
If your phone doesn't turn on, you've got a hard brick. Which is bad.
Sent from my U20i using xda premium
Click to expand...
Click to collapse
No, it can be a hard brick, he didn't do anything to put his device in danger (from what he claims).
He just needs a stock .ftf file for mini, which I was planning to do in the past, but did only for the pro... I am sorry my friend... There is only one solution -to make the ftf file yourself, which is something very confusing and you are going to need another mini to do this. But don't get your hopes down, it is possible, at least...
leajian said:
No, it can be a hard brick, he didn't do anything to put his device in danger (from what he claims).
He just needs a stock .ftf file for mini, which I was planning to do in the past, but did only for the pro... I am sorry my friend... There is only one solution -to make the ftf file yourself, which is something very confusing and you are going to need another mini to do this. But don't get your hopes down, it is possible, at least...
Click to expand...
Click to collapse
The phone it self comes to a point where there is some light on the screen, but i can't see the SE Logo anymore. I can charge the phone without problem from what it looks.
If I can get hold of another mini how can I make the ftf?
What did I do to achive this problem??
I tried to install MiniCM7-2.1.9-robyn and it ended with a phone that got stuck during boot. Then I got to a guide where someone said "Hardreset the device and use SEUS", but SEUS always says that my phone has the latest software.
TazBaz said:
The phone it self comes to a point where there is some light on the screen, but i can't see the SE Logo anymore. I can charge the phone without problem from what it looks.
If I can get hold of another mini how can I make the ftf?
What did I do to achive this problem??
I tried to install MiniCM7-2.1.9-robyn and it ended with a phone that got stuck during boot. Then I got to a guide where someone said "Hardreset the device and use SEUS", but SEUS always says that my phone has the latest software.
Click to expand...
Click to collapse
As far as SEUS is concerned, you DO have the latest software. It just doesn't realise that what you have doesn't work. Select the option to reinstall the software.
Sent from my U20i using xda premium
Ticklefish said:
As far as SEUS is concerned, you DO have the latest software. It just doesn't realise that what you have doesn't work. Select the option to reinstall the software.
Sent from my U20i using xda premium
Click to expand...
Click to collapse
Only one problem here, I don't have the option to reinstall the software at all after it says that I already have the latest software.
Can it be that the option is no longer there depending on SEUS version?
TazBaz said:
Only one problem here, I don't have the option to reinstall the software at all after it says that I already have the latest software.
Can it be that the option is no longer there depending on SEUS version?
Click to expand...
Click to collapse
There is a repair option in PC Companion, see it, please! The repair option on PC Companion is Support Zone --> Update --> Repair.
BTW, to hard reset :
1. Turn the phone off
2. Press the POWER button
3. Press and hold home key aprox 3 seconds
4. The hard reset is starting.
Hello there!!! I had the same problem just yesterday and I was about to get crazy in order to solve it...and then I found this post which was definately useful!!!! Just follow every single step and it will get back to work...btw I still can't flash the nAa-11 kernel with flashtool...it keeps on saying error and the flashing doesn't work
http://forum.xda-developers.com/showpost.php?p=20251565&postcount=8
leajian said:
There is a repair option in PC Companion, see it, please! The repair option on PC Companion is Support Zone --> Update --> Repair.
BTW, to hard reset :
1. Turn the phone off
2. Press the POWER button
3. Press and hold home key aprox 3 seconds
4. The hard reset is starting.
Click to expand...
Click to collapse
I will try that thanks, but you need to hard reset before the repair with PC Companion?
I managed to find the stock kernel so now I'm starting the device, but I get a SE logo and then It shuts off.
One problem when I try to repair on step 2 (prepare step) I get a error unable to start or phone update update components. (the pc companions is installed with the newest version)
Hi can someone please help!!
I have a xperia x10i to cut a long story short i lost the firmware and everytime i try to flash a new one it wont work, flashtool says its done but when i turn phone on after it flashes SE then a warning triange and phone and then restarts again and again and so on. the phone is not rooted. iv tried the official roms 1.6 2.1 and 2.2 but they wont go on. iv tryed using SEUS and companion but it keeps saying failed. im really confused
any help would be great thank you
dello2002 said:
Hi can someone please help!!
I have a xperia x10i to cut a long story short i lost the firmware and everytime i try to flash a new one it wont work, flashtool says its done but when i turn phone on after it flashes SE then a warning triange and phone and then restarts again and again and so on. the phone is not rooted. iv tried the official roms 1.6 2.1 and 2.2 but they wont go on. iv tryed using SEUS and companion but it keeps saying failed. im really confused
any help would be great thank you
Click to expand...
Click to collapse
Its "soft-brick" state.
Didnt you have some problems with usb before?
If not, try to charge up your phone once again.
Then read this topic, It will surely help you:
http://forum.xda-developers.com/showthread.php?t=1034997
usb and everything was fine before i started messing around the firmware.
battery was fine and when i was flashing the roms the green light was on and the computer recognised the phone OK so did flash tool. is there anyway of getting the phone into a fastboot mode so i can use the dos fastboot??
thanks
Make the phone root 1st.
Try read here http://forum.xda-developers.com/showthread.php?t=928343
Then u can flash other ROM u like to your device.
Sorry, i am also newbie. but i read a lot thread and follow senior guide ^_^
dello2002 said:
usb and everything was fine before i started messing around the firmware.
battery was fine and when i was flashing the roms the green light was on and the computer recognised the phone OK so did flash tool. is there anyway of getting the phone into a fastboot mode so i can use the dos fastboot??
thanks
Click to expand...
Click to collapse
Even if phone shows up error triangle you should be able to use standart flash mode.
About fastboot dont know, never used it.
hi,
Thanks both for your help, in the end i downloaded the lastest version of flash tool and its got a option of disable verification and worked spot on.
only problem now is rooting. iv looked everywhere and they all say use flashtool
but i can get the other buttons to show up but the root button wont and of course u cant flash cwm with out root. im running 2.3.3
any help would be great thanks
dello2002 said:
hi,
only problem now is rooting. iv looked everywhere and they all say use flashtool
but i can get the other buttons to show up but the root button wont and of course u cant flash cwm with out root. im running 2.3.3
any help would be great thanks
Click to expand...
Click to collapse
No problem, it could be done, but not so simply. I did rooting and xrecovery installation without Flashtool many times since Flashtool werent possible torun on Linux
Root could be done with exploit zergRush; but try SuperOneClick first. It will take some time root it completely manual.
Same with xrecovery, but its much more simple, pasting three or four files to root FS.
Try superoneclick first, if it wont help, will provide more step by step information.
EDIT:
Simpliest solution - almost forgotten
Download the zip provided underthis post.
Extract the zip file.
Connect your phone to computer (remember, that USB debugging must be on!!!)
Run file runme.bat (command line window will appear).
Enjoy !
dello2002 said:
Hi can someone please help!!
I have a xperia x10i to cut a long story short i lost the firmware and everytime i try to flash a new one it wont work, flashtool says its done but when i turn phone on after it flashes SE then a warning triange and phone and then restarts again and again and so on. the phone is not rooted. iv tried the official roms 1.6 2.1 and 2.2 but they wont go on. iv tryed using SEUS and companion but it keeps saying failed. im really confused
any help would be great thank you
Click to expand...
Click to collapse
RELAX first.
You will have to flash the stock SE firmware is by using the X10 Flashtool i .e. get your phone to stock and then root it again.
Here's a video link to the procedure :
http://www.youtube.com/watch?v=HmX-IYNYqL8
And a link to the stock SE firmwares:
http://forum.xda-developers.com/showthread.php?t=920746
I used this firmware :
http://www.4shared.com/file/_Scw5x_R/x10i_301g075_1241-1846.html
Happy Flashing !
hi all,
super one click and doom both say failed(cannot connect to deamon) adb drivers are properly installed and windows reconised phone bit the rooting programs wont. its starting to piss me off.
iv followed so many videos and forums but non work ???????
dello2002 said:
hi all,
super one click and doom both say failed(cannot connect to deamon) adb drivers are properly installed and windows reconised phone bit the rooting programs wont. its starting to piss me off.
iv followed so many videos and forums but non work ???????
Click to expand...
Click to collapse
do you have USB debugging and unknown sources turned on your phone? Because its really strange why adb cant connect.
What ROM and kernel you are currently running on?
@dello what does ur pc say when u type adb devices?
Sent from my X10S using XDA
hi,
running the official rom and kernal that the SEUS installed running 2.3.3
and yes debugging mode and allow are both on but still says cannot connect to deamon, could it be the boot loader? i put ICS on a xperia play and did that fine, do i need to unlock the bootloader like i did with the play?
i did try to but the se website wont unlock it
and ADB in dos wont pick it up list empty
cheers
Hi chaps,
After trying a gingerbread rom and finding it too slow, I see most other roms require a custom kernel for best performance (and being able to use most other roms!)
Anyway, I'm running through the tutorials in the stickied Guide in this forum and during the unlocking the bootloader instructions it keeps telling me to switch my phone off.
Now it doesn't mention having the phone plugged into the PC at any point in that section but I assume you have to for the SE Tweaker tool to work .
My problem is that in the first couple of steps I'm told to turn my phone off yet as it's connected to the PC, it keeps switching back on to charge ie. it's not staying off.
So naturally me being afraid of bricking my phone and it being a first time for me, I haven't progressed past this part. Any help or guidance would be much appreciated.
Thanks
LostHH said:
Hi chaps,
After trying a gingerbread rom and finding it too slow, I see most other roms require a custom kernel for best performance (and being able to use most other roms!)
Anyway, I'm running through the tutorials in the stickied Guide in this forum and during the unlocking the bootloader instructions it keeps telling me to switch my phone off.
Now it doesn't mention having the phone plugged into the PC at any point in that section but I assume you have to for the SE Tweaker tool to work .
My problem is that in the first couple of steps I'm told to turn my phone off yet as it's connected to the PC, it keeps switching back on to charge ie. it's not staying off.
So naturally me being afraid of bricking my phone and it being a first time for me, I haven't progressed past this part. Any help or guidance would be much appreciated.
Thanks
Click to expand...
Click to collapse
Turn your phone off and leave it disconnected from your PC
When the unlock procedure asks you to plug in your phone, press the back-button while you connect the usb-cable to your phone.
This way you enter flash-mode, which is what the tools require.
SmG67 said:
Turn your phone off and leave it disconnected from your PC
When the unlock procedure asks you to plug in your phone, press the back-button while you connect the usb-cable to your phone.
This way you enter flash-mode, which is what the tools require.
Click to expand...
Click to collapse
I can't seem to enter flash mode :/
I hold the back button and connect the phone to the pc. Initially it installed some flash driver onto the pc and then booted up as normal.
Now it just boots up as normal no matter how long I hold the back button (throughout the whole process so far)
Does having xrecovery have anything to do with this?
Thanks
Edit - my antivirus was quarantining s1tool.exe! derp.
Edit 2 - Success! Thanks chaps. You're all pretty cool in my books
please i need help to enable network on my phone
i went through the process of intalling minicm7.2 on my xperia x10 mini pro.
After unlocking my bootloader and intalling the rom, i cannot gain access to my network provider.
Please i need help to get the network back on my xperia x10 mini pro.
I ve relock the bootloader and restored the stock rom 2.1.1.a.0.6 but i still dont get access to my network.
PLEASE I NEED HELP.....
kingice85 said:
i went through the process of intalling minicm7.2 on my xperia x10 mini pro.
After unlocking my bootloader and intalling the rom, i cannot gain access to my network provider.
Please i need help to get the network back on my xperia x10 mini pro.
I ve relock the bootloader and restored the stock rom 2.1.1.a.0.6 but i still dont get access to my network.
PLEASE I NEED HELP.....
Click to expand...
Click to collapse
Did you relock the bootloader before you restored stock rom?
please help
SmG67 said:
Did you relock the bootloader before you restored stock rom?
Click to expand...
Click to collapse
yes i relocked the bootloader before i restored to the SE original stock rom...
I still cant get access to the sim network but can see the sim tool kits..pls help me
solotion
kingice85 said:
i went through the process of intalling minicm7.2 on my xperia x10 mini pro.
After unlocking my bootloader and intalling the rom, i cannot gain access to my network provider.
Please i need help to get the network back on my xperia x10 mini pro.
I ve relock the bootloader and restored the stock rom 2.1.1.a.0.6 but i still dont get access to my network.
PLEASE I NEED HELP.....
Click to expand...
Click to collapse
I have had problem like yours on x10i .
but about solotion:
just flash e15i nAa kernel file to your phone by flash tool before this phone must be rooted.100% worked for me .sorry about my english.:laugh:
Help
Hi,
i don't know if this comes under this section also,
i lost the post that i was using to update my x10 mini pro from 2.1 to 2.3 after my pc freezed and restarted.
So my SE finished the update but it's stuck on the Sony Ericsson text on boot up in faint brightness.
I used flshtool 0.9.0.0
rooted the phone and installed busy box.
restarted the phone with the blue screen menu a selected the NAa kernel from SD to load.
After that rebooted the phone then sony ericsson text came very bright then it starts to faint to minimum and nothing else happens.
If i connect flashtool i will get the following:
02/046/2012 14:46:55 - INFO - Device disconnected
02/047/2012 14:47:16 - INFO - Device connected with USB debugging off
02/047/2012 14:47:16 - INFO - For 2011 devices line, be sure you are not in MTP mode
02/047/2012 14:47:24 - INFO - Device disconnected
02/047/2012 14:47:26 - INFO - Device connected with USB debugging on
02/047/2012 14:47:27 - INFO - Connected device : U20
02/047/2012 14:47:27 - INFO - Installed version of busybox : BusyBox v1.19.4-cm7 bionic (2012-02-04 22:27 +0100) multi-call binary.
02/047/2012 14:47:27 - INFO - Android version : 2.3.7 / kernel version : 2.6.29
i even tried SEUS but nothing happens it would ask to reboot in flashmode and the device will enter flashmode and nothing happens.
also tried to restart with the blue screen menu by pressing power and the back button multiple times and back with volume + and - nothing occurs.
I downloaded ver 0.9.1.0
and tried the force root and here is the log:
Any solution ?
Thanks in advance.
nabilaj said:
Hi,
i don't know if this comes under this section also,
...
Any solution ?
Thanks in advance.
Click to expand...
Click to collapse
You have to flash the kernel from flashtool:
Put the kernel zipfile in the /firmwares folder where you installed flashtool
Choose the flash-button
Choose the kernel
Connect your phone in flashmode and it will be done (if your bootloader is unlocked)
You can not install a kernel from the sd-card using the CWM (blue screen) menu
The reason your phone doesn't boot up is because your ROM and Stock kernel are not compatible
If you're succesful in flashing the kernel, you should be fine.
There is no need to root your phone before you flash the kernel, and the ROM is pre-rooted.
stuck on text sony erricson nothing else can be done
Thank you for your reply,
i'm not able to flash anything on the device.
getting Error Flashing. Aborted.
please see the logfile of flashtool 0.9.1.0
and i'm trying to load U20_nAa-14_2.6.29.6-nAa-14.ftf
if i'm doing wrong tell me !
Please have a look at the log file.
Why i'm getting permission denied
and FTError
Thank you in advance.
SmG67 said:
You have to flash the kernel from flashtool:
Put the kernel zipfile in the /firmwares folder where you installed flashtool
Choose the flash-button
Choose the kernel
Connect your phone in flashmode and it will be done (if your bootloader is unlocked)
You can not install a kernel from the sd-card using the CWM (blue screen) menu
The reason your phone doesn't boot up is because your ROM and Stock kernel are not compatible
If you're succesful in flashing the kernel, you should be fine.
There is no need to root your phone before you flash the kernel, and the ROM is pre-rooted.
Click to expand...
Click to collapse
nabilaj said:
Thank you for your reply,
i'm not able to flash anything on the device.
getting Error Flashing. Aborted.
please see the logfile of flashtool 0.9.1.0
and i'm trying to load U20_nAa-14_2.6.29.6-nAa-14.ftf
if i'm doing wrong tell me !
Please have a look at the log file.
Why i'm getting permission denied
and FTError
Thank you in advance.
Click to expand...
Click to collapse
In your original post you said you tried to install the kernel from sd-card using the CWM menu, which is impossible
I suppose you have to unlock the bootloader first, in flashtool it's under the plugins-section.
But you first have to make sure it is safe or you can brick your device doing that
Go find the post where you got the kernel from, it will have a link to the bootloader unlock tutorial.
Use that to get instructions on how to know if your device is safe to unlock.
Then use the bootloader-unlock in flashtool's plugin-menu to unlock the bootloader.
Then flash the kernel.
stuck on text sony erricson nothing else can be done
Yes i did the root and unlocked the bootloader.
and loaded the kernel from SD card using CWM menu.
It was asking to load the kernel from SD card,
i wish i could boot with CWM to give you the exact steps.
The device was i guess able to work but i read somewhere in forum to try rooting again using force psneuter
and that was when things changed on the device cause i used to see in Clean Root icon in flashtool lot of apps and commands in red now only ls: in red is there!!
Regards
SmG67 said:
In your original post you said you tried to install the kernel from sd-card using the CWM menu, which is impossible
I suppose you have to unlock the bootloader first, in flashtool it's under the plugins-section.
But you first have to make sure it is safe or you can brick your device doing that
Go find the post where you got the kernel from, it will have a link to the bootloader unlock tutorial.
Use that to get instructions on how to know if your device is safe to unlock.
Then use the bootloader-unlock in flashtool's plugin-menu to unlock the bootloader.
Then flash the kernel.
Click to expand...
Click to collapse
nabilaj said:
Yes i did the root and unlocked the bootloader.
and loaded the kernel from SD card using CWM menu.
It was asking to load the kernel from SD card,
i wish i could boot with CWM to give you the exact steps.
The device was i guess able to work but i read somewhere in forum to try rooting again using force psneuter
and that was when things changed on the device cause i used to see in Clean Root icon in flashtool lot of apps and commands in red now only ls: in red is there!!
Regards
Click to expand...
Click to collapse
You can NOT flash the kernel from the sd-card
Only from your PC, and your phone does not need to be rooted for that, you only need an unlocked bootloader.
stuck on text sony erricson nothing else can be done
Ok I understood that part.
My question is how to fix my device if possible, i made a mistake somewhere there and don't recall cause i gave up after i looded the rom i think from SD card.
it's over 2 weeks and now i have some free time to try to fix it with the hope of getting someone here on in the forum to help me out.
Thanks
SmG67 said:
You can NOT flash the kernel from the sd-card
Only from your PC, and your phone does not need to be rooted for that, you only need an unlocked bootloader.
Click to expand...
Click to collapse
nabilaj said:
Ok I understood that part.
My question is how to fix my device if possible, i made a mistake somewhere there and don't recall cause i gave up after i looded the rom i think from SD card.
it's over 2 weeks and now i have some free time to try to fix it with the hope of getting someone here on in the forum to help me out.
Thanks
Click to expand...
Click to collapse
Try to do a repair with SEUS or PC Companion
Then flash the kernel
Boot into the CWM menu (included in the custom kernel)
Then flash the ROM you want
stuck on text sony erricson nothing else can be done
I tried,
start SEUS
1-Support Zone
2-Start
3-Phone software update, Start
will get a message could not find phone (repair phone)
will press on repair phone.
4-Phone software update, continue
5-Personal data will be lost tick the box ( i understand that my personal ....) next
6-Please select your phone ( will select U20i) next
7-it will ask to put the phone in flashmode ( will put my phone in flash mode and wait ) NOTHING happens
My phone will boot normally after waiting but stuck on the Sony Ericsson text.
What next ?
once i plug it's pluged it will ask to mount USB card
SmG67 said:
Try to do a repair with SEUS or PC Companion
Then flash the kernel
Boot into the CWM menu (included in the custom kernel)
Then flash the ROM you want
Click to expand...
Click to collapse
nabilaj said:
I tried,
start SEUS
1-Support Zone
2-Start
3-Phone software update, Start
will get a message could not find phone (repair phone)
will press on repair phone.
4-Phone software update, continue
5-Personal data will be lost tick the box ( i understand that my personal ....) next
6-Please select your phone ( will select U20i) next
7-it will ask to put the phone in flashmode ( will put my phone in flash mode and wait ) NOTHING happens
My phone will boot normally after waiting but stuck on the Sony Ericsson text.
What next ?
once i plug it's pluged it will ask to mount USB card
Click to expand...
Click to collapse
hmm, weird, normally the only problem there is that SEUS says there's no firmware available Keep pressing the back-button till it actually starts flashing.
stuck on text sony erricson nothing else can be done
i tried can't feel anymore with my figure of over using it
SmG67 said:
hmm, weird, normally the only problem there is that SEUS says there's no firmware available Keep pressing the back-button till it actually starts flashing.
Click to expand...
Click to collapse