Going back to ICS from Jelly Bean - HTC Rezound

I installed [ROM][Unofficial-AOKP] and while its nice some of the nuisances are frustrating. My previous phone was a DroidX so I could always just SBF back to stock no problems. But I am curious is there a way to go back to the an official ICS release by loading the PH98IMG.zip or whatever? I thought I heard once you went to an unofficial OTA you could never go back to pure stock if you were S-ON and I am okay with that I just want to get back to the last updated ICS that was available.
If I can just load the .zip what is the correct version and can someone point me to the download? Thanks.

You can go back to stock. You have to relock your bootloader by running "fastboot oem lock" from fastboot, and then reflash the stock RUU.
If you never updated past the Verizon OTA, you can get the 3.14.605.12 file from this site, rename it to PH98IMG.zip on your external SD, relock, and flash.
http://www.htcruu.com/?dir=Vigor

shrike1978 said:
You can go back to stock. You have to relock your bootloader by running "fastboot oem lock" from fastboot, and then reflash the stock RUU.
If you never updated past the Verizon OTA, you can get the 3.14.605.12 file from this site, rename it to PH98IMG.zip on your external SD, relock, and flash.
http://www.htcruu.com/?dir=Vigor
Click to expand...
Click to collapse
Cool, thanks.

You didn't make a nandroid backup of your existing rom before you installed a new rom? You should start if you didn't, that way if you installed a rom you end up not liking, you can just restore your previous one without needing to re-set up your phone all over again.

Stay root and flash Neo's simplistic 3.0 rom. It is a debloated version of the stock rom. It's not as smooth as jellybean but is about as stable as you can get.
Sent from my Rezound using Tapatalk 2

brenuga said:
Stay root and flash Neo's simplistic 3.0 rom. It is a debloated version of the stock rom. It's not as smooth as jellybean but is about as stable as you can get.
Sent from my Rezound using Tapatalk 2
Click to expand...
Click to collapse
So I found this thread and I haven't been to JellyBean on my Rezound yet. Currently running Hawks latest EclipticRez and Snuzzo's latest Kernel which is dope.
1) Can I just make a full Nandroid of my current rom, then flash Neo's Inception 2.5 to try out jellybean?
2) If I want to go back to ICS Sense, can I just restore my nandroid?
It seems that simple, but I dont want a brick and wanted to confirm that I can go back to ICS.
Thank you.
hole...

onthehole said:
So I found this thread and I haven't been to JellyBean on my Rezound yet. Currently running Hawks latest EclipticRez and Snuzzo's latest Kernel which is dope.
1) Can I just make a full Nandroid of my current rom, then flash Neo's Inception 2.5 to try out jellybean?
2) If I want to go back to ICS Sense, can I just restore my nandroid?
It seems that simple, but I dont want a brick and wanted to confirm that I can go back to ICS.
Thank you.
hole...
Click to expand...
Click to collapse
As long as you are S-OFF yes.
If you are S-on you'll have to reflash the boot.img of the ROM you started from/restore back to.
Sent from my ADR6425LVW using xda app-developers app

I am soff thanks.
Sent from my HTC Rezound.

Related

[KERNEL] Assorted Stock Kernels by ROM type and main version

There is lots of concern about kernels and flashing them with various main versions. There are 3 basic main versions floating around:
Shipped Rezound - Main Version = 1.02.605.6
OTA Rezound - Main Version = 2.01.605.11
Leaked RUU for Android 4.0.3 - Main Version = 3.10.605.7
I am not going to mess with the leaked RUU for 4.0.3 but I can help with the other two. So, all of the following can be flashed in recovery and will install the library then reboot to bootloader to install the boot.img.
This will at least help you install a complete kernel for whatever situation you are in to cure things like WiFi broken.
Choose the one that best fits your situation, copy it to your SD Card, reboot to recovery and choose the Install Zip option. When it reboots to bootloader press power to start and then follow the instructions.
Currently running a Gingerbread ROM before installing the OTA:
Main Version = 1.02.605.6
Currently running a ICS ROM before installing the OTA:
Main Version = 1.02.605.6
Currently running a Gingerbread ROM after installing the OTA:
Main Version = 2.01.605.11
Currently running a ICS ROM after installing the OTA:
Main Version = 2.01.605.11
NOTE: You must be HTC UnLocked
If you are running the stock OTA stick with that kernel
By the way,
The GB kernel is the unlocked kernel for ADB when phone is active.
The ICS kernel is the one for ICS 4.0.1
thanks for writing this up Nils, I think it will save alot of problems and questions arising from flashing different roms !
thanks man!
are these stock kernels??
andybones said:
thanks man!
are these stock kernels??
Click to expand...
Click to collapse
GB is unlocked but other than that they are stock
Wow, you just helped soooo many people. :thumbup:
Good work! :beer:
What if I have
Kernel version: 3.0.13-gaf15497
Build number: 3.10.605.7
I want to get back to GB so I can unroot, relock, and get the OTA's new radio?
BBEgo said:
What if I have
Kernel version: 3.0.13-gaf15497
Build number: 3.10.605.7
I want to get back to GB so I can unroot, relock, and get the OTA's new radio?
Click to expand...
Click to collapse
I assume your at the 3.x main version then. I can get you to the stock kernel but can't change the main version with this approach. You could try the gb kernel from the released version and see if you get the mainver failure. If you do you can use the manual approach to get to mainver back to 1.02.605.6
I'm currently on rooted stock shipped Rezound, no OTA. I'm having trouble flashing back to CleanICS, ineffibilis ICS and ineffibilis Gb roms. I was previously on CleanICS. Then decided i wanted to go back to a Gb ROM. So what I did was flash a GB boot.img then I tried to flash ineffibilis Gb, but then the installation gets aborted in recovey. I was able to restore my stock rooted GB ROM though.
I tried to flash your kernel for "stock Gb Rezound, before OTA", but I'm also getting a Mainver failure.
What do I need to do to Be able to flash ineffibilis GB ROM? I'm currently on Gb stock no OTA. Shouldn't I be able to flash other Gb roms without worrying about mainver?
Will the "curently running ICS before OTA" also install the new firmware?
Sent from my HTC Rezound
Will the "curently running ICS before OTA" also install the new firmware?
Sent from my HTC Rezound
Click to expand...
Click to collapse
No, just the kernel
Finally got my head around this a couple of days ago, and thought someone should do exactly this. This is what makes you, you. Thank you Nile for being the kind of developer every phone needs.
Sent from my ADR6425LVW using Tapatalk
NilsP said:
Currently running a Gingerbread ROM after installing the OTA:
Main Version = 2.01.605.11
Currently running a ICS ROM after installing the OTA:
Main Version = 2.01.605.11
NOTE: You must be HTC UnLocked
If you are running the stock OTA stick with that kernel
Click to expand...
Click to collapse
In my case, I was on stock with OTA 2.01.605.11, and am installing Senseless 2.1 ICS. By your terminology, would I go with "running an ICS ROM after installing OTA", or stick to the stock kernel per the final bold statement?
spitzaf said:
In my case, I was on stock with OTA 2.01.605.11, and am installing Senseless 2.1 ICS. By your terminology, would I go with "running an ICS ROM after installing OTA", or stick to the stock kernel per the final bold statement?
Click to expand...
Click to collapse
If your going to the ICS ROM you need to flash the ICS kernel.
The last statement simply means if you are running the OTA don't bother with any other kernels.
Gotcha. Thanks Nils
So to go from your ICS back to a stock rooted nandroid restore what would be needed? The main version thing is confusing.
Sent from my ADR6425LVW
silverxbv2 said:
So to go from your ICS back to a stock rooted nandroid restore what would be needed? The main version thing is confusing.
Sent from my ADR6425LVW
Click to expand...
Click to collapse
To go back to stock from my ICS ROM as long as you have not installed the OTA just requires running the stock RUU. You should not have to relock or anything since you still have the stock radio and hboot.
Now if you installed the OTA that is another story and there is a whole thread about that.
Part of my reason for starting this thread was to help others with main version problems.
The second reason was to help myself and other developers determine when we could safely cut our ROM's over to the OTA main version even if we did not use the new OTA kernel.
The downloads for these kernels, even after just 1 day, clearly indicates that most people have either accepted the OTA or installed the OTA ROM on their own. In other words, most of the downloads are for the versions that are based on the OTA main version to be installed on custom ROM's that use the old main version kernels.
I will watch the downloads for a few more days then decide what to do with my ROMs
NilsP said:
To go back to stock from my ICS ROM as long as you have not installed the OTA just requires running the stock RUU. You should not have to relock or anything since you still have the stock radio and hboot.
Now if you installed the OTA that is another story and there is a whole thread about that.
Click to expand...
Click to collapse
No. I didn't run the ota. Just need to get back to the stock gb Rom I made a backup of right after unlocking and rooting for a minute.
Sent from my ADR6425LVW
silverxbv2 said:
No. I didn't run the ota. Just need to get back to the stock gb Rom I made a backup of right after unlocking and rooting for a minute.
Sent from my ADR6425LVW
Click to expand...
Click to collapse
Do the nand restore and flash the GB kernel with old main version.
Nils,
Just wanted to clarify one thing. I relocked, flashed original ruu, accepted ota, unlocked again and rooted. still using this rom which is essentially bone stock rooted. If I flash CR based off latest ota and later decided to restore nandroid of the bone stock, do I flash this kernel as well?
Currently running a Gingerbread ROM after installing the OTA:
Main Version = 2.01.605.11
my apologies for the question but I wondered in the case you are restoring a nandroid, do you need to also flash the kernel before restoring the nandroid. Hope I made myself clear. lol.

Guide to go back completely stock

That's right looking ti take this phone back to stock. I can't seem to find a guide for it. Back to gb. Actually running ics
Sent from my ADR6425LVW using Tapatalk
You mean like the one in the dev forum that says [Guide] unrooting your Rezound?
Sent from my Vizio tablet using xda premium
ajftl said:
That's right looking ti take this phone back to stock. I can't seem to find a guide for it. Back to gb. Actually running ics
Sent from my ADR6425LVW using Tapatalk
Click to expand...
Click to collapse
Check this out
http://forum.xda-developers.com/showthread.php?t=1486220
are you running leak ics rom or ics custom rom?
i came back to stock from senseless ics.
what i did was
first, went back to stock rooted by flashing stock kernel and stock rooted rom.
then flashed stock recovery then re-locked the bootloader
then finally flashed ruu.zip from fastboot (1.02.605.6).
stock kernel: team bamf's unsecured stock
stock rooted rom: http://www.scottsroms.com/downloads.php?do=file&id=55
stock recovery: http://db.tt/tw5m33ZG
re-lock bootloader: fastboot oem lock
ruu.zip: http://www.scottsroms.com/downloads.php?do=file&id=38
or ruu.exe: http://www.scottsroms.com/downloads.php?do=file&id=37
I currently have the CleanRom ICSE 2.3, and would like to go back to the rooted stock rom, will this guide work for me...
thanks guys... im not re locking bootloader since what i really wanted was getting back to gb from ics.. and that guide up here worked... thanks
im running a gb rom now it boots and all work good but i cant still upgrade kernels.. i did everything with the exception of locking bootloader.. when trying to upgrade kernel keeps telling me main version is older?
UPDATE
the only way i can upgrade kernels is by pushing them using adb ..at least it works that way
tjefferson3 said:
I currently have the CleanRom ICSE 2.3, and would like to go back to the rooted stock rom, will this guide work for me...
Click to expand...
Click to collapse
not sure, but i doubt it will work
since mainver has been updated.
u can still try though.
if it doesn't work, u just need to re-flash
the kernel and the rom i think.

[Q] upgrade firmware from gb to ICS

Okay, So I've got s-off, unlocked, rooted, all of that stuff going on right now. I've been reading through and I'm so confused on how to upgrade from stock GB to ICS. I see so many methods for different roms, Can someone point me in the direction in I need to go? I'm currently running software number 2.01.605.11 w/ PRI 1.13_002, 1.88_002
Depends what you want to do....
If you dont care for new radios and such, flash an ics Rom of your choosing and then flash the old firmware patch.
If you want new radios run an ics ruu (2 times, 1st time only updates some stuff and you'll have issues unless you do it 2 times) then flash an ics Rom of your choosing.
Also upgrade to amon ra 3.15 if you are on an older version. 3.15 is updated for the changes in ics
Sent from my Rezound
Ok, I would like the latest RUU, but do I flash through recovery, or rename and flash through hboot or something?
EDIT: I currently am running Ra 3.15
Flash through hboot as a ph98IMG
Run it twice then you'll need to put amon ra 3.15 again.
I'll attach a copy of amon ra 3.15..... You can rename it to ph98img and flash it in bootloader the same way. Or you can use whatever way you prefer.
Edit: here's the link
http://db.tt/UuiVjcrb
from my Rezound
Thanks, That's what I thought. I use to be familiar with this when I was using my thunderbolt. But "upgraded" to the LG spectrum and there was absolutely no development for that phone for the 4 months I had it. So I lost touch. BTW never get that phone. I honestly hated it more than any apple product...which to me is a lot of hate
Ok, so I flashed the 3.14.605.5 Ice Cream Sandwich ZIP RUU, I'm still s-off, unlocked and running RA 3.15 . but now it saying I'm not rooted.
Can't you root it again through AmonRa??
I believe there is an issue with ICS. Just flash a rooted stock ROM.
Sent from my ADR6425LVW using Tapatalk 2
LunaticSerenade said:
I believe there is an issue with ICS. Just flash a rooted stock ROM.
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
That's what ended up doing after updating to the 3.14 firmware. Just installed the stock rooted 3.14 ROM.
Sent from my S-OFF Rezound using Tapatalk 2.
thanks for the speedy replies people. I'm downloading the stock rooted 3.14 now. so I will let you know if that fixes it
Ok, downloaded stock rooted deodex rom and everything is good. it's recognizing root again
Jlluna87 said:
Ok, downloaded stock rooted deodex rom and everything is good. it's recognizing root again
Click to expand...
Click to collapse
Excellent. An easy fix is always welcome.
Sent from my Sense 4 Rezound.

A few Questions.. Rooting, etc.. a couple issues..

Firstly.. I'll admit that I didn't read as throughly as I probably should have.. I have rooted several phones with the first being the original Motorola Droid and then a couple others.. All fairly tricky but for the most part no big deal... Anyway, I had no idea what S-ON or S-OFF meant nor was it very easy to find information such as this explained in detail..
Anyway, here is where I'm at..
1. Running S-ON, ICS w/ Slim 1.6
2. Phone has a tendency to reboot when it feels like it.. hasn't been too bad but seems to happen more when it's on 4G
3. Phone will NOT allow me to mount the internal storage nor the sd card when I plug into a computer.. like I mean it's not even an option, all I get are charge and internet tethering options..
4. the BIGGEST issue.. I can not tether whatsoever.. I've tried several apps such as Barnacle & PDAnet but none of which work.. I'm sorry I'm just used to the days of my incredible where it was very easy to tether and install ROM's all day long so I guess I was spoiled..
Any help would be appreciated.. the more I read though the more that S-OFF will offer and am I correct to have read that if I do the S-OFF I can turn my phone back to a "locked" status in the boot loader and in turn can also put back to completely stock??
Thanks!
You need to flash the old firmware patch. Should be able to find it in one of the rom threads
Sent from my ADR6425LVW using Tapatalk 2
pwned3 said:
You need to flash the old firmware patch. Should be able to find it in one of the rom threads
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
So after checking into some things I tried going a different route..
I downloaded Nils' Business ICS 4.0.3 Sense 3.6 (ICS Latest) (Aroma Installer).. followed the instructions.. installed with S-ON etc.. everything seemed fine.. NOW it won't stop rebooting after I configured Gmail & my work E-mail.. I can't boot into the bootloader menu unless I remove the SD card because it tries to flash the PH98IMG.zip as soon as it loads..
SO what to do next?? HBOOT I have the following information
UNLOCKED
VIGOR PVT SHIP S-ON SL
HBOOT-2.11.0000
Radio-0.95.00.1118r/0.95.0.1223r
OpenDSP-v10.6.0.7611.00.0919
eMMC-boot
Oct 6 2011, 15:43.22
HELP please!!
.make sure you install the kernel and the gb firmware patch...these 2 things missing will cause bootloops .
If you have issues ask in Nils thread and I am sure he will help you out. I have been s off and on ics firmware for awhile prior to the aroma install method. Otherwise I could help you out more
Edit: you will want to select the first 3 boxes on the aroma install screen...Rom...kernel...gb firmware patch
Not sure how the installer works after that...but that's a start.
Edit2: you are currently on gb firmware, in the future if you run a gb Rom you will need to flash the gb kernel for the Rom. Any ics based rims will require the ics kernel AND the firmware patch. Without the firmware patch your sd card won't show up properly. The wrong kernel will end up in boot loops. Hope this helps explain things a bit.
Sent from my ADR6425LVW using xda app-developers app
ericsignals said:
.make sure you install the kernel and the gb firmware patch...these 2 things missing will cause bootloops .
If you have issues ask in Nils thread and I am sure he will help you out. I have been s off and on ics firmware for awhile prior to the aroma install method. Otherwise I could help you out more
Edit: you will want to select the first 3 boxes on the aroma install screen...Rom...kernel...gb firmware patch
Not sure how the installer works after that...but that's a start.
Edit2: you are currently on gb firmware, in the future if you run a gb Rom you will need to flash the gb kernel for the Rom. Any ics based rims will require the ics kernel AND the firmware patch. Without the firmware patch your sd card won't show up properly. The wrong kernel will end up in boot loops. Hope this helps explain things a bit.
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
Thank you very much for the help... I really thought I was on ICS firmware.. I know this sounds stupid but isn't Android version 4.0.3 ICS??
OH WAIT it just hit me.. So my ROM is 4.0.3 but the kernel is still GB.. I gotcha.. so of course my next question is.. can I upgrade to ICS firmware without S-OFF or is that a requirement???
I think what I'll end up doing is just flashing GB ROM but curious what would be needed to get to ICS firmware and can I get back again?
You can upgrade to ics firmware (via ics ruu). However with s on, you can only run the ruu you are currently on and/or newer versions/leaks. With s off you can run any ruu you like.
Basically you never ran an ics ruu, so your firmware is gingerbread. You can run either gb or ics. With a gingerbread Rom, you would flash Rom and kernel. With ics Roms, you'll need to flash Rom, kernel, and firmware patch.
If you decide to upgrade and run a ics ruu it will upgrade your hboot, radios, and change the mount point for the sd card. The mount point change is the reason for the firmware patch. After running an ics ruu you will have ics firmware. Running a ics Rom, you'll flash Rom and kernel. If you change mind and want to go to a gb Rom, you'll need Rom, kernel, and firmware patch.
So depending on which version or way you go depends on the method of flashing a Rom. Firmware is independent of roms, and the only easy way to change firmware is via a RUU.
Supposedly the ota is coming soon, supposedly the latest leak is the ota, supposedly the s off exploit will not be able to be patched.
I decided to s off...there's many threads with lots of info...so if you decide to go that route take time, read, and read some more. It's not too hard just take your time and don't get frustrated.
Once s off, most roms flash the kernels automatically, saving you a step. You can also run any ruu you want. Ruu is like a factory image that wipes the phone and upgrades radio, etc....basically it will be like you first got the phone and turned it on.
Everyone has different experiences with radios, some are betterfor some, others worse. Overall the new ics firmware seems to be better on battery and network speed for me at least.
There's many ways to proceed....however most roms that are being worked are ics based...and will be more so when the official ics ota hits.
Sent from my ADR6425LVW using xda app-developers app
Sure enough!! I went with a GB ROM CleanROM GBE 1.7.5 and it is working perfectly.. I'll decide if I want to move forward with anything else.. I really liked the way the ICS ROMs ran so I man end up moving to that firmware in the future but thank you very much with the explanations that REALLY helped a lot!!
Have a great 4th!!
mmmmpsi said:
Sure enough!! I went with a GB ROM CleanROM GBE 1.7.5 and it is working perfectly.. I'll decide if I want to move forward with anything else.. I really liked the way the ICS ROMs ran so I man end up moving to that firmware in the future but thank you very much with the explanations that REALLY helped a lot!!
Have a great 4th!!
Click to expand...
Click to collapse
Anytime...best of luck and have a happy 4th yourself
Sent from my ADR6425LVW using xda app-developers app
mmmmpsi said:
Sure enough!! I went with a GB ROM CleanROM GBE 1.7.5 and it is working perfectly.. I'll decide if I want to move forward with anything else.. I really liked the way the ICS ROMs ran so I man end up moving to that firmware in the future but thank you very much with the explanations that REALLY helped a lot!!
Have a great 4th!!
Click to expand...
Click to collapse
ICS is the way to go, and for it to run properly you should run the latest RUU leak. This will give you the correct firmware. Once you flash the recovery of your choice back onto your phone and re-root, you really should S-off. Amon-Ra is the best initial Recovery choice, because it'll root anything, right there in recovery. S-off simplifies EVERYTHING. From there, you can flash the ICS Rom of your choice, and not have any of the issues you've been reporting.
With S-off, you can flash whatever radio you want, put a different boot-up splash screen on, and the kernel installs automatically when you flash a Rom.
It's a little time consuming, but it isn't difficult. There are threads from some very helpful guys here that explain how to do everything. So when you have some time, I suggest you just go for it. You'll be glad you did.
Best of luck,
BBEgo
ericsignals said:
You can upgrade to ics firmware (via ics ruu). However with s on, you can only run the ruu you are currently on and/or newer versions/leaks.
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
I'm still a little leary on doing the S-OFF so I have a question on this.. What do you mean by this?? What has to match to be able to run ICS ROM's.. Are you saying the ICS Firmware version needs to match the ICS ROM?

installed 3.14.605.5 leak,did s-off,now a problem

Hi. So I installed a 3.14.605.5 leak, and started to have bootloop issues. Prior to this it was s-on, unlocked. I now know I probably needed to flash the ruu twice, but I only did it once. I think I read instructions from a bad source. Since then I've done s-off successfully (since I was on the right firmware) and installed Rezrom s4 2,5. It boots up and works mostly ok, except going to the dialer crashes the phone and reboots it. Every time.
So now I'm wondering what I have to do. do I need to revert back to a leak?
thank you so much...
Try giving stock recovery a flash, factory reset then reflash the rom.
Sent from my ADR6425LVW using xda app-developers app
Snuzzo said:
Try giving stock recovery a flash, factory reset then reflash the rom.
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
Really? you aren't referring to "Vigor_Stock_Doedexed_3.14.605.5.zip"? you just mean flash a stock recovery? ive got amen ra right now, 3.15 I think...
cableguy1 said:
Really? you aren't referring to "Vigor_Stock_Doedexed_3.14.605.5.zip"? you just mean flash a stock recovery? ive got amen ra right now, 3.15 I think...
Click to expand...
Click to collapse
He is referring to the stock recovery. You can get it here...last item down the list: http://www.androidfilehost.com/main/-Support_Files-/SuperChilPil/
Just out of curiosity, is your hboot showing you being on ics firmware, as it should?
Old firmware patch or new firmware patch is your solution
What rom are you running?
Sent from my Rezound that finally has AOSP
superchilpil said:
Old firmware patch or new firmware patch is your solution
What rom are you running?
Sent from my Rezound that finally has AOSP
Click to expand...
Click to collapse
He said rez rom s4 2.5 ... He said he is on ICS firmware but I'm thinking he's still on GB and he may flashed a stock rom instead of the RUU.
topgun1953 said:
He said rez rom s4 2.5 ... He said he is on ICS firmware but I'm thinking he's still on GB and he may flashed a stock rom instead of the RUU.
Click to expand...
Click to collapse
That's what I'm thinking
The reason it would bootloop is the audio lib
So anything that produces a sound will cause a reboot
Is this the case cableguy?
Sent from my Rezound that finally has AOSP
My thinking was possible radio connectivity issues.
Sent from my ADR6425LVW using xda app-developers app
"The reason it would bootloop is the audio lib
So anything that produces a sound will cause a reboot
Is this the case cableguy?"
^^^ that sounds about right. the dialer and iheartradio will both cause a reboot!
"He said rez rom s4 2.5 ... He said he is on ICS firmware but I'm thinking he's still on GB and he may flashed a stock rom instead of the RUU"
^^^ also very possible! I believe it was this that I flashed initially: Vigor_Stock_Doedexed_3.14.605.5.zip ... so I guess you're right.
"Just out of curiosity, is your hboot showing you being on ics firmware, as it should?"
I attached a pic
thanx
cableguy1 said:
"The reason it would bootloop is the audio lib
So anything that produces a sound will cause a reboot
Is this the case cableguy?"
^^^ that sounds about right. the dialer and iheartradio will both cause a reboot!
"He said rez rom s4 2.5 ... He said he is on ICS firmware but I'm thinking he's still on GB and he may flashed a stock rom instead of the RUU"
^^^ also very possible! I believe it was this that I flashed initially: Vigor_Stock_Doedexed_3.14.605.5.zip ... so I guess you're right.
"Just out of curiosity, is your hboot showing you being on ics firmware, as it should?"
I attached a pic
thanx
Click to expand...
Click to collapse
Ah...now we see something...you have the latest ICS hboot, 2.25...but an older GB radio...not good to mix and match... So flash [ICS][2.25][JB][5-7]PH98IMG.zip
this file from http://www.androidfilehost.com/main/-Support_Files-/SuperChilPil/
This will flash the joupunut bear hboot and the latest radios... rename to ph98img.zip, boot into bootloader and let it flash. Be sure to delete, change name of the file after. This should work!
ps..if you have a nandroid of your last ICS rom ...give it a try if you want, it might work.
topgun1953 said:
Ah...now we see something...you have the latest ICS hboot, 2.25...but an older GB radio...not good to mix and match... So flash [ICS][2.25][JB][5-7]PH98IMG.zip
this file from http://www.androidfilehost.com/main/-Support_Files-/SuperChilPil/
This will flash the joupunut bear hboot and the latest radios... rename to ph98img.zip, boot into bootloader and let it flash. Be sure to delete, change name of the file after. This should work!
ps..if you have a nandroid of your last ICS rom ...give it a try if you want, it might work.
Click to expand...
Click to collapse
SOLVED!
thank you guys, top gun you're the man

Categories

Resources