Hi.
I have searched for this problem but didnt find anything useful.
I got a S3 and a Jabra Wave bt headset. All the A2DP works like a charm. But NOT on incoming calls.
It just plays the boring bliipbliipbliiipeliiblip.
It reads the sms as it should. Plays music as it should. All media comes thru as it should.
I have been struggeling with this for a week now. Tried diffrent apps like Enhanced Caller ID and such. Didnt work.
Did setup a tasker script that would say the callers name with tts on incoming call, didnt work.
Just get that stupid bliipsh1tbliip. Is it a bluetooth 4.0 <-> 3.0 issue ?
S3 got bt 4.0 and the Wave 3.0. Any help would be great.
Tried stock and viking rom. Using viking atm.
Could it be that liba2dp.so is missing ? bluetooth/audio.conf needs to be configured ? Or maybe that stupid headset just is crap...
Rules no bumping posts .
jje
Related
Just recently bought the iPhono mini BT450Rx to use with my SX66 with WM2003SE. Cannot make all features work at the same time. Here's the story. The mp3 players I'm using are WMPlayer and TCPMP
Installed Broadcom stack 3900 I got "hands-free" and "High Quality Audoi" working, but play/pause/stop/Prex/Next buttons on right earphone wouldn't work. Volume buttons do work.
Here I'd like to notice, that I also have Motorola HT820 BT stereo and its perfectly working with this stack with all buttons, receiving calls and so on. The only problem with HT820 I found so far: if I'm listening mp3 and there's an incoming call and I've answered it without pausing mp3 player, then, after end of the phone call I have to disconnect and reconnect BT Audio device in BT Manager. However, if I put mp3 player on pause and pick up the call, then I can just continue listening.
I tried to change the BT driver and found the one from HP for HP BT stereo, (which I also tried initially, but because it doesn't have "hands-free", I returned it and bought Motorola). It was downloaded from HP site, dont have link right now, but the exe filename is SP3003.EXE. The driver's version was 1.6.0700
Having installed this one I got stereo AND buttons working with mp3 player, but "hand-free" stopped working, probably because the driver is intended for the stereo headphones only, not the "hands-free".
Making some researches I realized, that the part that controlls buttons is sitting in the \windows\BTCeAvIf.dll file. So I extracted this file from HP 1.6.0700 driver, reinstalled Broadcom 1.0.3900 stack and replaced the file above. After all this manipulations, I got hansfree working, able to make calls BUT only to the moment when I connect Audio profile. At this moment I can listen mp3s, control, mp3 player with buttons on the iPhono mini, but cannot talk on the phone. However, if I disconnect "HQ Audio" profile in BT manager, the headset profile gets activated again.
This is pretty annoying, knowing, that HT820 works pretty well without all this tweaks.
Can anybody tell me whether I'm doing anything wrong, or if there's better drivers for iPhono, because I coudn't find another solution so far.
One of the good things with iPhono is it has 4 buttons in mp3 player mode play/stop/next/prev vs HT820 with play/next/prev.
The only thing, I cannot quite understand, since the stop button is also power/(make)answer the call button, how this device is going to determine whether I want to stop music or pick up the phone for making or answering call.
Hi there, I read your thread with a lot of interest cause i have the same problems as you. I purchased the BT450Rx too and had them paired with a Prophet, and I'm the same problems. Actualy, FF/REw works for me in WMP10, but not Pkay/Pause & Stop. Did you have any luck making them work?
TDX
tdx said:
Hi there, I read your thread with a lot of interest cause i have the same problems as you. I purchased the BT450Rx too and had them paired with a Prophet, and I'm the same problems. Actualy, FF/REw works for me in WMP10, but not Pkay/Pause & Stop. Did you have any luck making them work?
TDX
Click to expand...
Click to collapse
I'd actually resolved some issues earlier, wth the exception that I was using TCPMP player instead of WMP and still could not answer the phone while listening to the music.
I was able to use all buttons but on some MP3 files, very misteriously they wouldn't work.
Unfortunately my phone got hardreset because of a deep freeze I coudn't take it out from, so I'm gonna need to reinstall BT again and tweak it again to make headphones work.
I actually love them, and have been using them most of the time, about 4 hours every weekday just for music and audiobooks, despite they suck as a phone headset
I use the Samsung official SGS2 Car dock with an audio cable to my car DVD sytem. When navigating with Google Maps and playing music the phone routes the audio to my car speakers. That's working good.
When I have an incoming call my ringtone comes over the speaker, but when I accept the call the voice is being routed over my phone-speakers.
Is there a custom ROM / mod / app who can fix this?
Bonus question: Why can't the SGS2 use the top 3.5 mm as a video output for my DVD player? Even the Nokia n95/n97 could do this. Anyone?
Thanks
Someone ? Thnx
Dont think anyone knows the answer right ?
Try to go into Bluetooth settings, there you can find all your authorized devices. Long tap on your car device will bring you into services list. Check or uncheck required services. Probably it will help you.
Hello,
i have the same problem.... some a answer for this?
only Calls over the internal speaker.. other sounds over the car-system.
hope some rom could fix this.
facing same prob.
i read somethink and some developers told that, the kernal must root the audio to the docking station.... its a app in the market for this, but its dosn`t work....
i think its the same problem like the galaxy 1...
I have AutomateIt Pro app installed and i have created a profile to launch music player app when i plug headphones in.
When somebody is calling me, SGS3 shows in taskbar that heaphones plugged and it stars music player and messes everything...
I thought maybe it's AutomateIt Pro that's buggy, then i installed Tasker trial version, created the same kind of automation profile.
But i see the same behaviour again. It is really annoying. Why would SGS3 think that when there is an incoming call it means headset is plugged?
I'm running Omega 5.1 ROM with Siyah 1.1
The same was with Omega 4.2 and stock kernel
Any idea how to avoid that?
I not use AutomateIt Pro, but I had a similar problem, everytime I unplugged the earphone, the phones acted as it was still plugged in!! Afther talking with Samsung support, the solution was to hard-reset the phone. Afther I haven´t got the problem
I´m on stock rom and use the original earphones
I think it is different problem than yours
Hey there!
I got a german O2 SG3 16GB and since lunch my mic stopped to "listen" to my S-Voice commands. As far as i can remember i did not change a thing. If i use the Headset (the one that came with the phone) it works fine! The mic in the phone works fine on voicerecorder or phonecalls, so i dont know why it does not work when i want to use google voice search or stuff like that WITHOUT the headset although the mic works in phonecalls.
already reflashed, whiped and stuff like that... its O2 branded 4.0.4 android.
what can i do? what might be the prob?
hi all,
after updating to official ROM 4.2.2 on my samsung Tab2.7.0 i'm facing problem with connecting my BT headset (plantronics m55). BT connects but i hear strange static or distorted sounds on the both ends (ie. caller and receiver) this issue is only for phone calls.
But headset works fine for VOIP calls, Skype and listening to music and voice guided navigation.
I tried unpairing and and resetting a number of times but nothing has changed, i tried to connect another Plantronics M55 to my tab still the issue existed.
both M55 BT headset worked fine on my iPhone.
Please help to fix this.. I have made exhaustive search but couldn't find a solution.
jkjoms said:
hi all,
after updating to official ROM 4.2.2 on my samsung Tab2.7.0 i'm facing problem with connecting my BT headset (plantronics m55). BT connects but i hear strange static or distorted sounds on the both ends (ie. caller and receiver) this issue is only for phone calls.
But headset works fine for VOIP calls, Skype and listening to music and voice guided navigation.
I tried unpairing and and resetting a number of times but nothing has changed, i tried to connect another Plantronics M55 to my tab still the issue existed.
both M55 BT headset worked fine on my iPhone.
Please help to fix this.. I have made exhaustive search but couldn't find a solution.
Click to expand...
Click to collapse
Seems more like a problem with your carrier. Can you hear this sound without the BT also? even faintly.
BT headset Issues
Ryan the Skitzo said:
Seems more like a problem with your carrier. Can you hear this sound without the BT also? even faintly.
Click to expand...
Click to collapse
NO issues with carrier.
My BT headset works fine with my iPhone.
I tired other BT on my tab it doesn't work for voice calls.
But SKYPE and VOIP works well.
jkjoms said:
I tired other BT on my tab it doesn't work for voice calls.
But SKYPE and VOIP works well.
Click to expand...
Click to collapse
Are you only using skype and VIOP on wifi?
Could be the way your device handles carrier signals, in such a way it interferes with the bluetooth signals.
BT issues
Ryan the Skitzo said:
Are you only using skype and VIOP on wifi?
Could be the way your device handles carrier signals, in such a way it interferes with the bluetooth signals.
Click to expand...
Click to collapse
i use Skype and VOIP on both wifi and mobile data at both instances it works fine but if i've to make a voice call through my phone i hear only static and distortion on the BT headset, the same headset i used on my iphone and laptop it works fine.
The BT even plays music well on tab but voice call is the problem. I tried pair and unpairing a number of times even i tried to select only call audio and unpaired my Iphone and laptop, still it is giving the same problem i mentioned above.
BTW PLANTRONICS M55BT HEADSET was working fine until official firmware upgrade to 4.2.2 was done. My device is rooted.
waiting for an immediate help
need a help in bt
i have been using my rooted tab p3100 for past a year, and i use sonyericsson mw600 BT headset for calls... it was working fine with custom rom sungsonic hd... now i tried kitkat roms like sensonic hd, dhollman, beanstalk by adi and got a problem... in all the roms my bluetooth is working fine with media like songs and videos and first call... but from the second or third call my tab freezes and needs to reboot by power buttton... this happens only with BT... i have tried another bt headset also and experienced the same.... does anyone else facing the same or having solution... as the tab is my phone i need it badly
BT ISSUES
vasanth46 said:
i have been using my rooted tab p3100 for past a year, and i use sonyericsson mw600 BT headset for calls... it was working fine with custom rom sungsonic hd... now i tried kitkat roms like sensonic hd, dhollman, beanstalk by adi and got a problem... in all the roms my bluetooth is working fine with media like songs and videos and first call... but from the second or third call my tab freezes and needs to reboot by power buttton... this happens only with BT... i have tried another bt headset also and experienced the same.... does anyone else facing the same or having solution... as the tab is my phone i need it badly
Click to expand...
Click to collapse
Dear Vasanth,
please try with stock ROM (ive not tried custom ROM on tab yet) and let me know the results....my tab is being rooted and ive problems as mentioned earlier in making voice calls over the network....voice calls on skype and other VOIP services is working fine on BT headset (3G, WIFI)
BT ISSUES
jkjoms said:
Dear Vasanth,
please try with stock ROM (ive not tried custom ROM on tab yet) and let me know the results....my tab is being rooted and ive problems as mentioned earlier in making voice calls over the network....voice calls on skype and other VOIP services is working fine on BT headset (3G, WIFI)
Click to expand...
Click to collapse
dear jkjoms
thanks for the reply... i had been using the stock based rom and was working fine... now again i switched to it(sungsonic hd anniversary edition)...
it is working fine with it.. but out of eagerness i am expecting some solution for it in kitkat custom roms, because they are slimmer and faster... anyhow thanks
looks like this problem started with the official jb update and continues with the M builds for tab 2 series.