[Q] Can someone compile a CM10 for LG L3 E400R? - Android Q&A, Help & Troubleshooting

The Roms made for the LG L3 E400 dont work properly on the E400R Wifi, and Network connection is lost. Rooting it is also different, which I did manage to get done after lots of searching. You must use the Rageagainstthecage methold in superoneclick. Now if someone could just get a rom working for the E400R, I bet alot of people would be very happy! I can supply the stock rom if needed. Sorry if this is not the right spot, but theres no forum for the L3
Please help me, and all the others with the canadian version stuck on android 2.3

hkkory said:
The Roms made for the LG L3 E400 dont work properly on the E400R Wifi, and Network connection is lost. Rooting it is also different, which I did manage to get done after lots of searching. You must use the Rageagainstthecage methold in superoneclick. Now if someone could just get a rom working for the E400R, I bet alot of people would be very happy! I can supply the stock rom if needed. Sorry if this is not the right spot, but theres no forum for the L3
Please help me, and all the others with the canadian version stuck on android 2.3
Click to expand...
Click to collapse
It would be great if someone could help. Sorry if Im double posting, but I need help, and so does anyone else who wants to a custom rom for the E400R. I am worried to give it a shot by myself because everyone who tried managed to ruin the network connection. Someone with more experience is needed.

BUMP

BUMP BUMP

Assuming I can make a build following this: http://wiki.cyanogenmod.org/w/Build_for_e400#Prepare_the_device-specific_code
Would the components necessary to run cm9 on the e400r be successfully extracted and integrated into the build?

nevermind...

L3 No Signal, No Wi-Fi apk
hkkory said:
The Roms made for the LG L3 E400 dont work properly on the E400R Wifi, and Network connection is lost. Rooting it is also different, which I did manage to get done after lots of searching. You must use the Rageagainstthecage methold in superoneclick. Now if someone could just get a rom working for the E400R, I bet alot of people would be very happy! I can supply the stock rom if needed. Sorry if this is not the right spot, but theres no forum for the L3
Please help me, and all the others with the canadian version stuck on android 2.3
Click to expand...
Click to collapse
OK - so I was going through the apps after finally figuring out how to root it (I'll post a link to a page if needed) and wanting to barebone this bloated factory ROM.
Finally fudged around too much, KDZ wouldn't work but made it so it shows v11e software version, though wouldn't even turn on. Changed the brick for a new one under warranty.
Noticed I now have MSM7225A, whereas my first phone was a MSM7625A. Tried the rom again, but still no carrier signal / SIM access. ended up flashing Telus V12A rom and ripping out the bloatware....faster now and battery is good for a good day or two - probably won't bother with an ICS/JB update now...
We need the RIL files extracted to make this work, but the kdz doesn't break open like older models...

Related

[Q] Help rooting Galaxy TAb P1000L with Gingerbread 2.3.6

I have the Galaxy Tab P1000L
I been trying to root it with Superoneclick and with DoomLord Zergrush, I keep failing all attempts, as I did research on this, I found out some info that says it is not possibe to root Gingerbread 2.3.6 (what I have) and that I need to dowgrade to 2.3.5 or to froyo (which is it?) , but SamMobile does not have Froyo available for download anymore...
So basically, I need to know how to root 2.3.6, main reason is I want to be able to change my Tab's HotSpot channel, and I read that this is only possible on a rooted GTab.
Thanks a lot for any help on this, I am new to Android, so trying to learn as much as I can.
( Secondary question: On a quick note, is it possible to upgrade to HoneyComb/is it worth it?)
Hope someone can help, I tried several things yesterday with no success, I had to stop for the day.
My P1000L is from Mexico Telcel with Gingerbread 2.3.6, I would like to downgrade to root, then either re-flash rooted firmware or move up to rooted Honeycomb if that is considered a better option, I am honestly not happy with Gingerbread WiFi performance at all, it wont auto connect to my home WiFi or hold a HotSpot sharing for long before it defaults to AndroidAP +default random password, bfore with Froyo I didnt have that problem. Just want to try custom firmware before I give u on it...
Thanks for any help on this.
Waited a few days but no answer, it must be too newb of a question, the fact is I am a newb at this, i'll try to do my 10 posts so I can do proper searches, this forum is huge.
At this point my better guess is to try downgrading to stock telcel P1000L firmware and then take it from there, GB 2.3.6 just not root friendly at all...
Still, if anybody can offer even a direction to go with this I will appreciate it very much...
hi there, use the humberOS gingerbread is the most stable rom i have tested (i have tested a lot!) i dont have complains but an issue about the buying on the market, u cant buy anything! but u can fix it easily, anyway, is the best, i leave u some links to check it out
http://www.humberos.com.br/2011/10/humberos-v21.html
http://forum.xda-developers.com/showthread.php?t=1124224
have fun!
and yea, begin to look, only lke that u will have answers, there is an clasifyied field of only galaxy tab development p1000, p1000l and p1000n in the same place, enjoy!
Thanks for your replay Xornx, I did my reading here, quite a bit of reading, it all paid off, I am running ICS on my P1000L, stable and everything working as it should, rooted and all my problems solved

[Q] HELP! Manual update from 2.2.2

Hello all,
In advance i just want to say sorry if im missing a thred that can already help me and if i am a link would be great,
I am in the uk, this is the current spec of my phone...
Android version
2.2.2
Kernal version
2.6.32.9
software version
V10d-APR-27-2011
If any more info is needed then i will be happy to post it
OK, i am on the 3 network and have sent an email to LG regarding updating to 2.2.3 and they say that it is only available in the UK on the T-mobile network, I want to no if i can manually update to 2.2.3 that is compatible with the UK and my network. If not is there anyway to unlock my phone to make it compatible?
I have already rooted my phone using Gingerbreak
If i can update is there anywhere where i can get download links and a step by step guide that will work on my phone? i have been through many posts that explain things but i still am not to sure whether they will work with my phone, and if the ROM will work with my phone.
If i could get some advice or if someone could point me in the right direction of a post that will help me i would be most grateful!
Again i'm sorry if i am completely missing the obvious, i'm just a n00b in the process of learning.
Ive been stuck at the same point in the process for months
Thanks
Sorry!
I meant that i want to update to 2.3 gingerbread, or if anyone no's of any better ROM's that would be great, i generally use my phone for games, apps, music and browsing the internet so i just assumed that the official 2.3 ROM would be a better option but i am open to any suggestions. Thanks in advance to anyone willing to help me Kudo's
Download rom manager from market and flash clock wok rocovery and use a rom from ther they are mostly based on 2.3 or if you looking for something more advanced with tweeks download a rom from here make shur you have the right baseband 1st

[Q] sk17i - help

hi guys, I know help has been asked plenty of times for this and other phones. also I read dozaens of guides, but this instead of helping me, made me very confused :crying:
here is my problem: my girlfriend's sk17i has a terrible signal connection, so I would like to try different basebands on it (could that fix the problem or at least improve the situation?)
my problem is that I didn't understand clearly what I need to do on the phone to change basebands.. root? unloack bootloader? install cwm? install custom roms or stock ics will be ok?
ps. I am not new in root, see my signature I own a rooted defy+ and installed dozens of custom roms on it, so I would just like to know from you which preliminary steps I have to do and are strictly necessary to change basebands, once I know that I will try to do that by myself following the many guides I found..!
pps. I would like to do as less things as possible, just because it is not my phone and if I brick it a can get killed :laugh: if it was mine no problem I did everything possible on mine
thanks in advance for all the help you can provide
bye!
moly82 said:
hi guys, I know help has been asked plenty of times for this and other phones. also I read dozaens of guides, but this instead of helping me, made me very confused :crying:
here is my problem: my girlfriend's sk17i has a terrible signal connection, so I would like to try different basebands on it (could that fix the problem or at least improve the situation?)
my problem is that I didn't understand clearly what I need to do on the phone to change basebands.. root? unloack bootloader? install cwm? install custom roms or stock ics will be ok?
ps. I am not new in root, see my signature I own a rooted defy+ and installed dozens of custom roms on it, so I would just like to know from you which preliminary steps I have to do and are strictly necessary to change basebands, once I know that I will try to do that by myself following the many guides I found..!
pps. I would like to do as less things as possible, just because it is not my phone and if I brick it a can get killed :laugh: if it was mine no problem I did everything possible on mine
thanks in advance for all the help you can provide
bye!
Click to expand...
Click to collapse
To change baseband, you only need Flashtool, proper FTF file (every firmware includes different baseband) and phone with USB cable.
No root, no need to unlock bootloader, no CWM, any ROM will do.
Which baseband(BB) are you currently using? Also, which ROM?
Someguyfromhell said:
To change baseband, you only need Flashtool, proper FTF file (every firmware includes different baseband) and phone with USB cable.
No root, no need to unlock bootloader, no CWM, any ROM will do.
Which baseband(BB) are you currently using? Also, which ROM?
Click to expand...
Click to collapse
thanks for the reply!
good to hear.. seems I can try different BB's pretty easily so
she's on stock ICS 4.0.4..
BB: 8x55a-aaabqoazm-203028g-77
FW: 4.1.B.0.587
if it was mine, I would have already rooted, unlocked it and tried FXP cm10.. I can't stand all those sh*tty apps included in stock roms.. but as I wrote it is not mine and if I brick it that would be a big problem..
(even if actually she is using it as it was a old phone as data connection is almost un-usable.. 3g status is always almost 0, and 2g can not be used because of operator problems.. : ( ) so she can only use it with WI-FI in the office and then no data connection anymore..
that's bad, I bought her that phone and if I knew before data connection signal was so bad I would have never bought it
you think I can improve the situation trying different BB? tx again!
I doubt it will help. I do not think changing baseband will make it any better.
Try the same SIM card in another phone(s). Does the issue still occur in other phone(s)? If yes, the issue is with either the SIM or the operator.
Then try another SIM card in the Mini Pro. Does the issue still occur with another SIM card in Mini Pro? If yes, then the issue lies in your phone.
I have already made tests, troubleshooting etc (I work in a service department :laugh: ) and I am sure the problem is on the phone that's why I would like to try a different BB as last hope.. if that won't work then I will trow it away and buy something else.. :crying:
bull****
moly82 said:
hi guys, I know help has been asked plenty of times for this and other phones. also I read dozaens of guides, but this instead of helping me, made me very confused :crying:
here is my problem: my girlfriend's sk17i has a terrible signal connection, so I would like to try different basebands on it (could that fix the problem or at least improve the situation?)
my problem is that I didn't understand clearly what I need to do on the phone to change basebands.. root? unloack bootloader? install cwm? install custom roms or stock ics will be ok?
ps. I am not new in root, see my signature I own a rooted defy+ and installed dozens of custom roms on it, so I would just like to know from you which preliminary steps I have to do and are strictly necessary to change basebands, once I know that I will try to do that by myself following the many guides I found..!
pps. I would like to do as less things as possible, just because it is not my phone and if I brick it a can get killed :laugh: if it was mine no problem I did everything possible on mine
thanks in advance for all the help you can provide
bye!
Click to expand...
Click to collapse
changin BB won't change anything
prantoroy said:
changin BB won't change anything
Click to expand...
Click to collapse
wow.. that's not so good to hear.. so I've just wasted the money I spent for that sh*itty phone! ((( (everything else is good on it actually, but with that bad reception can't be used, simply..)

[Need] {Request} - LG Risio aka LG Leon for Cricket Wireless Factory Firmware(QH-USB)

I am requesting the stock firmware for the LG Risio, if anyone can dump it or find it from somewhere and post it here so I can reflash my phone (got it for christmas) that would be awesome, I tried rooting unfortunately and what had happened was I had selected lte vs cdma flash although the phone is lte and the guide says CDMA it still failed, and now it wont boot, and I could have just used kingsroot and purified the system so im kind of annoyed.
Here is a chinese forum that has it, but you need cool points to get it......
http://enbbs.gaodi.net/Firmware-669206-1-1.html
if someone could help this could help alot of bricks im sure...
lg leon lte h343 cricket/at&t
i was wondering if you got ahold of stock rom or any working firmware for the lg leon te h343 all i find are resources for h345 etc. i even tried that chinese website with LG H343 Phone Firmware H34310A_00 USA AIO Edition Official Download. yet of course unsure of how to get enough cool points to view download. LG website is unhelpful also with nothing to offer. i have the h343 yet due to wrong steps taken theres no recovery just secure boot error 1003. boot loop loads into os for 1 min then restarts again. installed factory reset apk which failed yet continues to restart process.
FSPKwon said:
I am requesting the stock firmware for the LG Risio, if anyone can dump it or find it from somewhere and post it here so I can reflash my phone (got it for christmas) that would be awesome, I tried rooting unfortunately and what had happened was I had selected lte vs cdma flash although the phone is lte and the guide says CDMA it still failed, and now it wont boot, and I could have just used kingsroot and purified the system so im kind of annoyed.
Here is a chinese forum that has it, but you need cool points to get it......
http://enbbs.gaodi.net/Firmware-669206-1-1.html
if someone could help this could help alot of bricks im sure...
Click to expand...
Click to collapse
mccblaylock said:
i was wondering if you got ahold of stock rom or any working firmware for the lg leon te h343 all i find are resources for h345 etc. i even tried that chinese website with LG H343 Phone Firmware H34310A_00 USA AIO Edition Official Download. yet of course unsure of how to get enough cool points to view download. LG website is unhelpful also with nothing to offer. i have the h343 yet due to wrong steps taken theres no recovery just secure boot error 1003. boot loop loads into os for 1 min then restarts again. installed factory reset apk which failed yet continues to restart process.
Click to expand...
Click to collapse
Nawww. The link being locked is irrelevant. If you go up one hierarchical level in the forum (LG LEON), you'll see the various countries and variants. All of them have the link to the .KDZ. All of them except one. You know which one is missing the KDZ link. Wasted a few hours on this ****. **** sucks.
Anyone find a way to restore our cricket lg risio's???
I have 5.1.1 but my phone was in 6.0 and at downgrade, came to imei null. If you could flash one of yours, update to 6.0 and obtain your flash would be awesome!
http://www.needrom.com/download/lg-h343-criket-5-0-android/
directions to dump? I can do it for ya. I just need to know how
subysvxak said:
directions to dump? I can do it for ya. I just need to know how
Click to expand...
Click to collapse
That's a good question I think if you are rooted you can use Titanium Backup

Root for Cubot HAFURY UMAX?

I recently bought a HAFURY UMAX made by Cubot and i've been trying to find a way to root it and install a custom recovery. I've tried most of the methods that I could find on google like Kingroot, etc.
I haven't been able to find anything compatible because its a pretty obscure phone.
Any help would be awesome!
No information yet
I have been searching for this since my phone arrived and there's no clue about rotting it yet. Maybe installing another ROM but I'm not into cooking ROMs yet.
root software -- Cubot max <-> Hafury Umax
You can find a rooting software for Umax here. It woks on Max and Umax (URL is without :// for I am not allowed to submit URLs)- http guideroot.net/cubot-max-download-android-8-0-o-firmware-nougat-7
Best regards
Axel
I also need root for this device. Is there any kind people who can port twrp? Any help would be most appreciated thanks
---------- Post added at 07:15 PM ---------- Previous post was at 07:13 PM ----------
Axel Arnold Bangert said:
You can find a rooting software for Umax here. It woks on Max and Umax (URL is without :// for I am not allowed to submit URLs)- http guideroot.net/cubot-max-download-android-8-0-o-firmware-nougat-7
Best regards
Axel
Click to expand...
Click to collapse
Virus mate.
stumbag said:
I also need root for this device. Is there any kind people who can port twrp? Any help would be most appreciated thanks
---------- Post added at 07:15 PM ---------- Previous post was at 07:13 PM ----------
Virus mate.
Click to expand...
Click to collapse
TWRP: https://www.needrom.com/category/cubot/max/
After flashing TWRP you could then install Magisk which will give you root.
Have you managed to unlock your bootloader (although it is not necessary to install TWRP using SP Flash Tool) ?
Thank you for your help however the link you posted is for a cubot Max and I need twrp for cubot hafury umax. I don't think the twrp would work for the umax? As I think they have different chips mine is MT6580 and the max is MT6753A
Tried every app for rooting with no success.
I have downloaded every app and program that claimed to root nougat devices (RootKHP too, but it's just a bad coded virus) and I haven't been lucky yet. I have also done the "manual method"(adb push and then moving those files to /system) but this phone it's not exploitable in that way either. Maybe, compilling TWRP and installing it is the key, but HAFURY doesn't give any help to do so (as usual). I sent them emails, asking for help because of the bugs and also asking for the ROM itself. No luck. They claim to be preparing an update or something that will be released in the official cubot forum... but in that forum there isn't any entry about this phone.
Looks like HAFURY will not give a damn and, probably, will shut down in a time. They KNOW that this phone works faulty ( touch-screen problems, Wi-Fi unstable), but they are not doing anything.
I will not buy another phone from them nor from a chinese manufacturer. I have learnt.
I will try to buy a One Plus One as soon as I have money.
I too sent an email asking about an update and this is the reply I received. Dear Sir/Madam,
Sorry there is no update in the near future, the schedule of it has not been connected, you can keep an eye on our forum, thanks!
So it looks like cubot don't care about there customers
There is an update ROM on cubot forum.
Now we have access to ROM an recovery maybe we cud compile twrp?
What I found so far about the Update
As Stumbag said a couple of days ago, Cubot released an update for the HAFURY UMAX. I downloaded it as soon as I found it and, first of all, don't expect nothing. The only change I noticed is the build name, everything else is like the older version. The Wifi is still unstable, the touchscreen still requires to lock and unlock for working fine when it doesn't detect the touches and still, no root for this phone. I searched for a way to root a ROM before installing it but no luck yet. Also, I extracted the system.img and I haven't found weird packages, as I said, there's nothing different from the older build. What I noticed is a weird file called "recovery_rootcheck.bin" allocated in /data/ that contains other 3 files but I cannot read them properly. Screenshots included:
The location of the file: //i.imgur.com/FW9VAKi.png
The code of the file: //i.imgur.com/mNSpCgW.png
I dumped the older ROM before installing the new, but I am not sure I have done it well but, anyway, I have the dump file.
I will keep searching a way to compile TWRP but I have zero experience on compilling so I don't think I will archieve it.
So, CUBOT has released the ROM as an Update.
Guys. I did it. I compied a TWRP Recovery for the HAFURY UMAX. It works but the stock recovery is being reinstalled after a reboot. Tomorrow I will fix it and I will write a tutorial for installing TWRP and a rooted ROM I did. It's slightly different from the stock ROM (I removed bloatware, deodexed every package, zipaligned, changed the bootanimation and a few more things for making the phone truly free). The ROM is being uploaded to my GDrive right now.
Expect a new Thread tomorrow about installing TWRP and this Custom ROM.
Well done nekuake ?
Could you point me in the right direction for the twrp? Thanks
It doesn't work yet.
It doesn't work. The TWRP I compiled doesn't recognize the phone's partitions. I'm waiting for the reply of HAFURY/CUBOT, because if they send me the device tree, it would be quite easy because I know what to do next.
Nekuake said:
It doesn't work. The TWRP I compiled doesn't recognize the phone's partitions. I'm waiting for the reply of HAFURY/CUBOT, because if they send me the device tree, it would be quite easy because I know what to do next.
Click to expand...
Click to collapse
any luck on a response from HAFURY/CUBOT? i just got this phone today and im abit curious myself
ElectricDevil said:
any luck on a response from HAFURY/CUBOT? i just got this phone today and im abit curious myself
Click to expand...
Click to collapse
They didn't give a damn. Now, I am working in other things (university and that stuff). As soon as I have time again, I will try to use another device tree and adapt it to this phone.
Also, you shouldn't have bought this phone. You will see a lot of bugs that WON'T be fixed. HAFURY/CUBOT have a ridiculous support.
Nekuake said:
They didn't give a damn. Now, I am working in other things (university and that stuff). As soon as I have time again, I will try to use another device tree and adapt it to this phone.
Also, you shouldn't have bought this phone. You will see a lot of bugs that WON'T be fixed. HAFURY/CUBOT have a ridiculous support.
Click to expand...
Click to collapse
that sucks,yea i kind of regret getting this phone,and i hope you make some future progress with it when you have the time.I'm wondering is there any way to access the internal storage from explorer? i can only see the sd card for some reason and the mobigo app it comes with has the option to root but doesn't do anything but restart the phone
ElectricDevil said:
that sucks,yea i kind of regret getting this phone,and i hope you make some future progress with it when you have the time.I'm wondering is there any way to access the internal storage from explorer? i can only see the sd card for some reason and the mobigo app it comes with has the option to root but doesn't do anything but restart the phone
Click to expand...
Click to collapse
They released the phone ROM while ago: forum[dot]cubot[dot]net/viewtopic.php?t=1495
You can extract the system.img and take a look inside the System partition.
Nekuake said:
They released the phone ROM while ago: forum[dot]cubot[dot]net/viewtopic.php?t=1495
You can extract the system.img and take a look inside the System partition.
Click to expand...
Click to collapse
If you did any progress please let me know if you manage to either use TWRP or Magisk, actually any root will be nice :good:
I've tried to use ported 6580 TWRP 3.1.1 and TWRP from Cubot Rainbow 2, it doesn't cause any bootloop but doesn't seems to work either
https://forum.xda-developers.com/android/development/twrp-unofficial-custom-recovery-mt6580-t3505687
https://www.needrom.com/download/twrp-3-1-0-jemmini/
Both use the same mediatech however, I have no ****ing idea how to boot in TWRP, I've tried the **cubot max (DO NOT TRY)** that used something else then MT6580 and it gave me a bootloop, soo whoever said Max equal with UMax **** him
I'm trying other TWRPs
Well, i haven't tried to compile TWRP again because Cubot/Hafury doesn't want to give me any of the files I requested (as I though). I will mirror the repo of OMNI and, well, pray a little the next time I try to compile it.
For the moment, I have tried to use any of the TWRPs there are in the Internet of similar phones. They haven't work. The phones I tried were Infinix Hot 5 and Infinix Hot 5 Lite. Please, people, try things like I'm doing and we will have TWRP and Root soon.
Hi IV tried doogee X5 and some others but haven't worked I will keep trying come on peeps we can do this

Categories

Resources