Related
Hi everyone,
I brought a new galaxy s2 phone about 4 weeks ago and it has spent most of that time soft bricked since I tried to update it to the newest firmware, K14....
I am using windows 7 starter, 32bit. I have installed kies, uninstalled and re-installed kies, tried uninstalling kies and just using the drivers.
Recently I did a clean install of windows, installed kies, as more drivers seem to be recognized and downloaded odin v1.85. I restart the computer, start task manager end all processes that say kies, run odin as a administrator, put the tar file in pda, only auto reboot is selected. I then plug in the phone, in download mode, wait for yellow box and press start and the process only goes as far as boot.bin.
I have tried all of my usb ports and the only difference is the number of the modem installed driver and how far along odin gets. With two ports it only goes as far as setup connection which was as far as anything went before I re-installed windows. I have replaced the usb cable and made sure the phone battery is fully charged. The phone was put into usb debugging mode before it was bricked. I have attached a picture of what drivers get installed when I plug in the phone. The firmware I am attempting to flash is the uk 3 version off the firmware page of this website.
Please can somebody give me the solution it is driving me nuts!
Sorry for waffling but I figure you need to know what I've tried so that I don't waste anybodies time.
Thanks guys
Did you try a different stock rom? Did you try a different pc? Or if you want to, flash a CF-root kernel. Then boot in recovery and flash a rom of your choice.
The flashcounter will start and stock roms can't be flashed this way (at least as far as I know).
Is your phone a I9100 model?
I ask this to make sure you are trying to flash the correct firmware for your device.
Sent from my GT-I9100 using XDA App
Cookoospite said:
Hi everyone,
I brought a new galaxy s2 phone about 4 weeks ago and it has spent most of that time soft bricked since I tried to update it to the newest firmware, K14....
I am using windows 7 starter, 32bit. I have installed kies, uninstalled and re-installed kies, tried uninstalling kies and just using the drivers.
Recently I did a clean install of windows, installed kies, as more drivers seem to be recognized and downloaded odin v1.85. I restart the computer, start task manager end all processes that say kies, run odin as a administrator, put the tar file in pda, only auto reboot is selected. I then plug in the phone, in download mode, wait for yellow box and press start and the process only goes as far as boot.bin.
Possibility one bad firmware file or wrong file ,
Or not using Samsung USB cable .
jje
Click to expand...
Click to collapse
Hi Lenny,
Yh, i have tried it on my desktop which runs 7 home premium. Clean install with same results. Tried the K14 firmware a few times but that never got any further than setup connection. Don't understand the rest of your post sorry. Can you do a flash for dummies thing? And is there a firmware you would recommend trying?
@ aceofclubs -the box says i9100 and so does the sticker in the back.
@ JJEgan - the first cable I used was the one in the box and while the one I have replaced by ebay, they had good feedback. The K14 firmware was given to be by a user of the galaxy s2 that he had successfully flashed with.
Does the phone look to have installed correctly, the guy who gave me the firmware said he had abd appear in device manager, which I haven't got. Also after the phone is finished installing drivers if I click in the system tray, the green icon that shows devices that are present is not there and neither is the phone but if I go into device manager samsung composite device is.
Cookoospite said:
Hi Lenny,
The K14 firmware was given to be by a user of the galaxy s2 that he had successfully flashed with.
Does the phone look to have installed correctly, the guy who gave me the firmware said he had abd appear in device manager,
Better of following the instructions than second hand stuff .
Download firmware from stock rom thread no excuses of bad firmware then .
Stock Roms .and csc
http://forum.xda-developers.com/showthread.php?t=1075278
jje
Click to expand...
Click to collapse
Thanks for the suggestion JJegan but I just tried another firmware from the link you provided above with no success, stopped at setup connection. What is abd and do I need it? Think I must be missing some drivers!
Cookoospite said:
Thanks for the suggestion JJegan but I just tried another firmware from the link you provided above with no success, stopped at setup connection. What is abd and do I need it? Think I must be missing some drivers!
Click to expand...
Click to collapse
No you dont need a ADB neccesarily for flashing. ADB (Android Debug Bridge) is a tool that comes with the Android SDK that allows you to control and interface with your Android device. Well do u have the phone specifications before bricking it, like Model No, Built, CSC, Kernal Etc.
First try to uninstall Kies and Install the latest version, so that you have the latest drivers.
Check the Intratech thread on Stock ROM ( http://forum.xda-developers.com/showthread.php?t=1075278) and download the correct rom.( I presume you have I9100 Intenational Version of S2). Open Odin 1.85, do not change any options, brownse and put the stock rom u downloaded into the PDA section and click on start button, you should be good.PM me if you have any issues.
The above didn't work. Here's what I got:
Cookoospite said:
Thanks for the suggestion JJegan but I just tried another firmware from the link you provided above with no success, stopped at setup connection. What is abd and do I need it? Think I must be missing some drivers!
Click to expand...
Click to collapse
AS you have the yellow box in Odin you have the drivers all the firmware in that link works .
run odin as a administrator, put the tar file in pda, only auto reboot is selected. I then plug in the phone, in download mode, wait for yellow box and press start
Lets do this the right way just to be sure . Open Odin put the tar file in PDA
go to download mode at first screen download mode on phone follow instruction ( vol up from memory ) after next screen connect Samsung USB cable to phone and PC .
jje
Thanks, think I've done that anyway but, just to check, what do you mean by next screen?
The screen when you are in download mode and press volume up.
Yh that is what I'm doing, thanks tho. Can someone please give me a reliable link to an older version of Odin to try? At the mo I am using v1.85, this the latest version?
Sent from my GT-I9100 using XDA App
Odin 1.3 here
Cookoospite said:
Yh that is what I'm doing, thanks tho. Can someone please give me a reliable link to an older version of Odin to try? At the mo I am using v1.85, this the latest version?
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
So close! I plugged the phone in and got as far as cache with the green progress bar showing just the tiniest bit. Left it for over an hour but the bar didn't move at all! Encouraged I restarted the computer to try again only to find that now the computer and odin won't recognize the phone until I uninstall and reinstall kies and always hangs on cache. I restarted in the first place as the phone never shows in the system tray. Sorry to be a bore but have you any idea why everyone else can plug in and flash and my machines refuse to! I welcome any ideas you have. Thank you.
Instead of Odin, you could try Heimdall. Maybe that will work for you.
http://forum.xda-developers.com/showthread.php?t=1104826
Thanks Lenny. Don't know how to use it tho no boxes like on the tutorials I have watched in the latest version. Can you clue me in please?
Sent from my GT-I9100 using XDA App
Here is a guide, it should work the same for our phone.
http://forum.xda-developers.com/showthread.php?t=878686
Thanks. Have to wait a couple of days to try it now. Happy Christmas
Sent from my GT-I9100 using XDA App
hey hope everyone had a good christmas and new year. Still no joy, where do I get PIT files to flash with the newest version of heimdall to go with our firmware? The newest version won't let me add files until I enter a PIT. I tried version 1.1 but I couldn't get it to recognise a compatible device.
On the odin front: I thought I'd cracked it. It started flashing, took hours but I had half a green progress bar and then it just seem to freeze. Also this seems replicable a few times and then I get stuck at setup connection again. I then have to do a system restore to get it to flash to the furthest point again. Does this give anyone any clues? Or does anyone know of any heimdell packages I could try? And the long shot, any way of getting firmware on to an sd card and flashing that way when a phone is soft bricked?
Sorry if I'm annoying you but there has to a way round this. I brought a rooted one to use while this is sorted, love the phone but need to know I can update and be able to sort it out if things go wrong.
Thanks again for your help and suggestions.
Hello guys.
I recently bought the Galaxy Note i717 locked to Rogers (Canada).
The seller told me that he has installed custom rom on the device. I thought it would not be problem but it seems like my phone is kind of laggy compared to others'.
I tried to connect KIES to install the original ICS firmware but my mac does not recognize my note.
The message on KIES when I connect USB cable is that ' device not responding '.
I tried turning on/off the phone and USB debugging mode.
I haven't back up my phone as I could not get it connected with computer.
My phone is samsung sgh i717
Android Version is 4.0.4
Broadband version is i717UCLE2
Kernel Version is
3.0.9-perf-I717UCLE2-CL526350
[email protected]#1
Build number is IMM76D.UCLE2
Please let me know how I can upgrade to normal ICS without losing data..
I am really stuck and new to Android System. (therefore I am a noob)
HELP ME!!!!
rhwngur said:
Hello guys.
I recently bought the Galaxy Note i717 locked to Rogers (Canada).
The seller told me that he has installed custom rom on the device. I thought it would not be problem but it seems like my phone is kind of laggy compared to others'.
I tried to connect KIES to install the original ICS firmware but my mac does not recognize my note.
The message on KIES when I connect USB cable is that ' device not responding '.
I tried turning on/off the phone and USB debugging mode.
I haven't back up my phone as I could not get it connected with computer.
My phone is samsung sgh i717
Android Version is 4.0.4
Broadband version is i717UCLE2
Kernel Version is
3.0.9-perf-I717UCLE2-CL526350
[email protected]#1
Build number is IMM76D.UCLE2
Please let me know how I can upgrade to normal ICS without losing data..
I am really stuck and new to Android System. (therefore I am a noob)
HELP ME!!!!
Click to expand...
Click to collapse
Install CWM Recovery and you can install any of the custom roms. All you have to do is install CWM and put the downloaded rom on your SD Card and install it with CWM. Go here http://forum.xda-developers.com/showthread.php?t=1526431 and download the one that says ODIN in the first post then read the instructions to flash CWM Recovery with ODIN in post two on the page link above. Now you can flash roms without needing your computer. Now you can head over to to the development area for the I717 Note and pick a rom to flash with CWM. make sure you read the instructions for each rom cause it will tell you to do a full wipe on most and you do that inside CWM. Another tip is that you will never ever need KIES and the only use for it is having the Samsung driver that get installed with it so your PC will sync with your device. KIES is kinda useless.
EDIT: you probably already have CWM installed. Before going and tryin to install it hold down the power and volume up volume down at the same time and the device will shut off but keep holding down those three buttons. Now the device will vibrate and the Samsung logo will appear, let go of the power button but keep the volume buttons pressed in and CWM should pop up after a few seconds. If you have CWM already installed do not flash it again just find a rom and flash it through CWM like I stated above. In CWM the volume buttons move you up and down the list and the power selects.
rhwngur said:
Hello guys.
I recently bought the Galaxy Note i717 locked to Rogers (Canada).
The seller told me that he has installed custom rom on the device. I thought it would not be problem but it seems like my phone is kind of laggy compared to others'.
I tried to connect KIES to install the original ICS firmware but my mac does not recognize my note.
The message on KIES when I connect USB cable is that ' device not responding '.
I tried turning on/off the phone and USB debugging mode.
I haven't back up my phone as I could not get it connected with computer.
My phone is samsung sgh i717
Android Version is 4.0.4
Broadband version is i717UCLE2
Kernel Version is
3.0.9-perf-I717UCLE2-CL526350
[email protected]#1
Build number is IMM76D.UCLE2
Please let me know how I can upgrade to normal ICS without losing data..
I am really stuck and new to Android System. (therefore I am a noob)
HELP ME!!!!
Click to expand...
Click to collapse
Go to this thread for a quick tutorial on flashing http://forum.xda-developers.com/showthread.php?t=1586223
There is no "original" ICS firmware for i717. As of yet no i717 ICS firmware have been released by carriers, save for the unofficial leaks, which you seem to have.
If you want to go back to stock firmware of Rogers, make sure to do a factory reset in CWM and then flash a stock GB ROM. The other choice is to wait for the official ICS release from Rogers (which I hear is coming this month) and then flash that when it comes out.
Otherwise, search for stock i717R GB firmware on the forums, put it in SD card and then flash it using CWM.
If you don't want to lose your data you could try using Titanium Backup from the play store to backup your apps and data, flash your firmware, and then download titanium backup from the play store again on your new firmware and use the restore function (if you are flashing a stock rom, you need to root first before using the restore function). Don't know how well that would work though, never tried it myself.
Hey I have a SGS2 but its a generic handset from ACG. Its similar to USCC device but my kernel is completely different than any others on the web. If I use ODIN to flash a custom Kernel in my device will it result in data loss or any other harm? I am still kind of lost as to what using ODIN to flash a custom kernel will do to my device other than put CWM and SuperUser on my device.
I would also like to know this. I also have a SCH-R760.
I actually ran through the rooting method, and the Kernel didn't touch the Radio. I didn't have LOS, and I am running Jelly Bean on my device now. You can follow the links in my signature below =]
nice, if you need the stock ever shoot me a pm, and I can get it uploaded.
If anyone is just wanting stock root, it can be found HERE.
could someone please help me asap, im an amateur tech geek and well i tried rooting my phone and i downloaded the wrong kernel and now my phones stuck in airplane mode, no hardware info or baseband info please help me ! DD:
-uscc galaxy s ii sch-r760
thankyou
DakotahRay said:
could someone please help me asap, im an amateur tech geek and well i tried rooting my phone and i downloaded the wrong kernel and now my phones stuck in airplane mode, no hardware info or baseband info please help me ! DD:
-uscc galaxy s ii sch-r760
thankyou
Click to expand...
Click to collapse
If you can get it in download mode, do a one click Odin back to stock and start over. For my phone I use EL29. Usually if you can get it to Samsung screen, it is only soft bricked and fixable. Good luck!
Install the Galaxy S 2 Drivers
Driver Download
On your phone, select USB Debugging and Unknown Sources from the Settings menu.
(unknown sources located in the application tab in settings at the very top and usb debugging located in the application tab in settings in under development).
Plug your phone into your computer with the USB Cable that came with it.
Download this easy rooter tool
Epic 4G Touch Auto Fixer
Run the e4auto-sfx.exe (aka Root and download mode placer)
Press E then Enter.
Then press H then Enter on your keyboard then press any button to continue.
Your phone will now reboot into download mode. (green android guy that with a downloading bar)
Download Odin if you don't already have it
Odin Download
Download this Stock SCH-R760 File
Stock Download
Select the PDA Option on your Odin and flash it.
This will restore your device to factory default settings. From there you might need to flash your carrier files into the phone since this will restore it 100% back to factory settings.
If you have more questions I am here to help.
feyerbrand said:
Install the Galaxy S 2 Drivers
Driver Download
On your phone, select USB Debugging and Unknown Sources from the Settings menu.
(unknown sources located in the application tab in settings at the very top and usb debugging located in the application tab in settings in under development).
Plug your phone into your computer with the USB Cable that came with it.
Download this easy rooter tool
Epic 4G Touch Auto Fixer
Run the e4auto-sfx.exe (aka Root and download mode placer)
Press E then Enter.
Then press H then Enter on your keyboard then press any button to continue.
Your phone will now reboot into download mode. (green android guy that with a downloading bar)
Download Odin if you don't already have it
Odin Download
Download this Stock SCH-R760 File
Stock Download
Select the PDA Option on your Odin and flash it.
This will restore your device to factory default settings. From there you might need to flash your carrier files into the phone since this will restore it 100% back to factory settings.
If you have more questions I am here to help.
Click to expand...
Click to collapse
Hey, I have a generic sch-r760. I already managed to root but I am wanting to install a custom kernel with cwm attached. Need to get a recovery on the thing and I'm looking for ROMs as well but if I can at least get a kernel with cwm I'll be on the right path
I am sorry to be 'That guy'... But this is not the right place at all for this question.
If there is a forum for the device in question, you need to go there and ask the question. If not you need to go to http://forum.xda-developers.com/forumdisplay.php?f=456 and ask the question there.
If a noob comes in here and does anything on there E4GT from this post, they will be very unhappy.
I have asked a MOD to move the post to avoid confusion.
graydiggy said:
I am sorry to be 'That guy'... But this is not the right place at all for this question.
If there is a forum for the device in question, you need to go there and ask the question. If not you need to go to http://forum.xda-developers.com/forumdisplay.php?f=456 and ask the question there.
If a noob comes in here and does anything on there E4GT from this post, they will be very unhappy.
I have asked a MOD to move the post to avoid confusion.
Click to expand...
Click to collapse
Thanks, I had been trying to locate the correct spot so I keep doing searches on the model number commenting and hoping someone can help out and tell me where km suppose to be:good:
Thread moved to Android Q&A since it didn't belong in the Epic 4G Touch but doesn't seem to have its own forum.
Thanks for your understanding on this matter.
~ The-Captain
coltlacey1 said:
Hey, I have a generic sch-r760. I already managed to root but I am wanting to install a custom kernel with cwm attached. Need to get a recovery on the thing and I'm looking for ROMs as well but if I can at least get a kernel with cwm I'll be on the right path
Click to expand...
Click to collapse
This guide works great for the SCH-R760x even though this is a US cellular site
Root Guide with CWM and no Triangle.
Team US Cellular posted some good stuff for this phone on their website. Haven't seen any mirrors on XDA yet
http://teamuscellular.com/Forum/files/file/140-stock-ics-with-root/
Ok
Trying to Unroot.
But today I have this giantic issue.
My recovery mode just doesnt appear anything like before.
I have tried unrooting using a Root_Remover.zip file. But I can't find at all the "install zip" menu in recovery mode I had when I had to root it first ! Now it just wont appear at all. I only have :
Reboot system Now
Apply update from external Storage
Wipe Data/Factory REset
Wipe Cache Partition
and nothing more. I even tried the second menu (apply update from ext.stor.) but im not using any external storage.
I thought "all right, Ill get through it with ODIN >>> WRONG !!!!!! No download mode ...
So right now I'm completely screwed since theres no way I can perform an unroot under such conditions.
Please someone help me out with this, sorry for being a bit too straightfoward but after 72h spent on that @#%? I find it pretty unrelevant that this ****ing menu wont show the hell up. Even though I guess Im just doing something wrong, I need help.
EDIT : All right. So I figured out most tutorials are written by incompetent people whom mostly release pseudo tutorials that are just here to show the world that they can perform this or that, but in fact, can't take a single second to make a point where you don't get access to DOWNLOAD MODE the same way on a Tab2 than with a S2 -_-. We don't enter DOWNLOAD mode the same way ... geez ... so I figured out that using the Up volume button instead of the down volume button would eventually get me there. Which it did. Come on ... how is it possible that after 15 tutorials, not ONE did mention that ?
Also, ODIN doesn't want to do @#%? right now. I browsed the right firmware, plugged my tab to my laptop ... hit START and it ends in 5 seconds after "all thread completed (0 succeed/0 failed)
I've tried multiple stock firmwares (all the same but form different locations or mirrors) and ... nothing. So ...
First, please clarify these couple of questions. What device do you have? What version of recovery do you have? And one more out of curiosity. Where did you get that root remover zip?
Sent from my GT-P7500 using Tapatalk 4
Most of the tutorials are written for the GT-P75xx. Being that it's also the device for the section you posted this rant in, I can see why the tutorials were not what you needed. Just my two cents but condemning the authors of the tutorials will most likely get you very little help. Not to mention this section isn't for your device.
Sent from my GT-P7510 using XDA Premium HD app
Benzoman said:
Most of the tutorials are written for the GT-P75xx. Being that it's also the device for the section you posted this rant in, I can see why the tutorials were not what you needed. Just my two cents but condemning the authors of the tutorials will most likely get you very little help. Not to mention this section isn't for your device.
Sent from my GT-P7510 using XDA Premium HD app
Click to expand...
Click to collapse
Don't know what happened to my last reply but anyway :
All the threads I read were for Tab2 p51xx or SII.
As explained in first reply (which disappeared), I had and have my damn good reason to condemn people who spam the net with their useless blogs. Won't waste time explaining again a reason which won't certainly arent interested in. But it was costy in term of $.
That said I then realized XDA still exists so I launched a quick google search and fell on this subboard. Reading "Samsung Tab 10.1", unfortunatly didn't mean to me it is a seperated sub forum from the Samsung tab2 10.1. My bad ... do I have to get this thread transfered to the right place or admins will find it useless ?
_____________
My ROM is none. I unrooted but didn't install any ROM. After that I simply figured out I don't need one. But today I need to upgrade to anything above 4.0.4 after the very bad experience I had late friday eve which is quite costy.
I have one more minor trouble I didn't speak of in my first post :
I bought my tablet in September 2012 in the Netherlands GT P5110, ICS 4.0.4. So after checking on the XDA page where all of the stock firmwares are listed, I realized there is no "perfect" match. The only firmware for the Netherlands and for P5110 is from April 2012 and ICS 4.0.3, not 4.0.4 ; yet it is the one I downloaded. Should I get another one ?
About the Root remover, I uploaded to my tab one I downloaded from a website which I can't recall or find on google right now because I downloaded two from two different websites and only remember this one : www techbloggerzone com/2012/09/how-to-unroot-galaxy-tab-2-101-gt html [dots for WWW | COM and HTML were removed since I'm not allowed to post external links yet]
I think there's nothing else missing, but tell me if there is.
IMPORTANT EDIT : I just realized the factory usb plug I have for the Samsung must be damaged. It charges on sector, but isn't identified properly on my laptop and thus won't let me connect it by wire. Didn't figure this out earlier as I did all transfers by Kies wifi. Damn ... but it only explains why Odin can't upload anything to my tab, not why I can't use find the zip install option in Recovery mode for the root_remover.zip
As already stated you're in the wrong place but we all try to help each other here...but no more rants or you might find a stoney silence will be your only reply....
Problem with Odin is more likely laptop drivers and/or windows version and not your cable...
Samfirmware has many 4.0.4 roms for your "area", they have a 4.1.2 version for Netherlands and 4.0.4 for Belgium, Luxembourg etc. As long as you find an XX version it will have Dutch language option.
The recovery you described when you eventually got into it sounded like stock recovery so you wouldn't be able to choose and flash zip from there
Calm down, take a deep breath, get your laptop and drivers sorted first or you'll not get anywhere... Did you have a yellow indication with com port number in the Odin window, if not it is surely drivers. Does windows in any way recognise the tab when connected? (warning tone, does device manager show anything?)
sent from my still superb Google I/O 7510 (xda hd)
stinky73 said:
As already stated you're in the wrong place but we all try to help each other here...but no more rants or you might find a stoney silence will be your only reply....
Problem with Odin is more likely laptop drivers and/or windows version and not your cable...
Samfirmware has many 4.0.4 roms for your "area", they have a 4.1.2 version for Netherlands and 4.0.4 for Belgium, Luxembourg etc. As long as you find an XX version it will have Dutch language option.
The recovery you described when you eventually got into it sounded like stock recovery so you wouldn't be able to choose and flash zip from there
Calm down, take a deep breath, get your laptop and drivers sorted first or you'll not get anywhere... Did you have a yellow indication with com port number in the Odin window, if not it is surely drivers. Does windows in any way recognise the tab when connected? (warning tone, does device manager show anything?)
sent from my still superb Google I/O 7510 (xda hd)
Click to expand...
Click to collapse
I thought I had all my drivers updated (for the samsung tab, installed like two or three weeks ago), so if it's about drivers, then I don't get it . I checked that in the first place. The cable sometimes fails the connection to my laptop, but today it just won't work. :/. Windows recognizes the device as an external object which can't properly install and such connect (yellow pop up message in right corner, over the task bar). I do not exactly undersatnd what you mean by a yellow indication with "com port" number in the Odin window, but I don't think I had that ... in fact I'm pretty sure about it.
If it's just about drivers, where can I go to find the latest ?
Try looking in Samsung site for drivers here http://www.samsung.com/us/support/
What version of odin are you using? Would recommend 1.3 for the tab 2.
The indication of com port in odin is as in attached image, if you haven't got that then the computer is not recognising your tab, either because of drivers, or cable, but as we've said, you should start with the drivers, probably by downloading the latest from Samsung, deleting all drivers you have at the moment then re-installing.
If the tab is not recognized by the computer then programs like odin cannot do anything as they use the computers' usb bus...
stinky73 said:
Try looking in Samsung site for drivers here
What version of odin are you using? Would recommend 1.3 for the tab 2.
The indication of com port in odin is as in attached image, if you haven't got that then the computer is not recognising your tab, either because of drivers, or cable, but as we've said, you should start with the drivers, probably by downloading the latest from Samsung, deleting all drivers you have at the moment then re-installing.
If the tab is not recognized by the computer then programs like odin cannot do anything as they use the computers' usb bus...
Click to expand...
Click to collapse
Thank you very much !! I was using Odin 1.85 and Odin 3.7 (used 1.85 for rooting), I'll try a downgraded version.
Keep you in touch if problems are resolved or not after that. Thank you again.
Hi
I unsuccessfully tried to root my YP-GI1CW using the process described at:
http://forum.xda-developers.com/showthread.php?t=1852546
I realise now it was the wrong process but unfortunately my player now has the "firmware upgrade encountered an issue".
I would like to recover if if possible but Although Odin can detect the device when attached, adb does not see any devices. Im not sure if I can make the damage any worse but would appreciate any help in recovering my device.
Thanks - xdanewbie
Did you make a backup of your ROM first off
Second: can you get in recovery
Third: if you want to superuser try superoneclick to root your device
Fourth:you have to be careful not to do things like that it's very dangerous to the device.
Sent from my YP-G70 using XDA Free mobile app
troy5890 said:
Did you make a backup of your ROM first off
Second: can you get in recovery
Third: if you want to superuser try superoneclick to root your device
Fourth:you have to be careful not to do things like that it's very dangerous to the device.
Sent from my YP-G70 using XDA Free mobile app
Click to expand...
Click to collapse
Hi
No, i didnt make a backup
I can start the media player with power-vol down-home and i get into the download screen but when i continue i then get the "firmware upgrade encountered error" message.
I definitely will be more careful now. is my devicce broken forever ?
Thanks - xdanewbie2014
xdanewbie2014 said:
Hi
I unsuccessfully tried to root my YP-GI1CW using the process described at:
http://forum.xda-developers.com/showthread.php?t=1852546
I realise now it was the wrong process but unfortunately my player now has the "firmware upgrade encountered an issue".
I would like to recover if if possible but Although Odin can detect the device when attached, adb does not see any devices. Im not sure if I can make the damage any worse but would appreciate any help in recovering my device.
Thanks - xdanewbie
Click to expand...
Click to collapse
As long as you can access download mode you should be able to get the device working again. I'd try heimdall (get suite 1.3 I believe) instead of Odin. It usually works better. You just need to find the Odin stock package for your device.
Sent from my YP-G1 using XDA Free mobile app
xdanewbie2014 said:
Hi
No, i didnt make a backup
I can start the media player with power-vol down-home and i get into the download screen but when i continue i then get the "firmware upgrade encountered error" message.
I definitely will be more careful now. is my devicce broken forever ?
Thanks - xdanewbie2014
Click to expand...
Click to collapse
No you didn't break your device forever. All you have to do is install your stock rim that suites your device and flash it with hemidall
Sent from my YP-G70 using XDA Free mobile app
Hi
I have found all the files I need here
http://forum.xda-developers.com/showthread.php?t=1531850
BUT I cant get the device into download mode. I start the device with Powe+vold down+home key and it asks me to press vol up to continue. However, when I press vol up I get the "firmware upgrade encountered an issue" error.
Boy am i learning now
Thanks - xdanewbie
Hi
I realised that Heimdall was failing as it was using the standard sansung USB drivers. Im now trying to figure out how to stop those drivers from loading every time i plug in the YP-GI1.
In the meantime, I used ODIN to try and load the PIT and PDA rom image.
It appears to work but then the write fails (see attachment)
Any help would be appreciated - Thanks
.
xdanewbie2014 said:
Hi
I realised that Heimdall was failing as it was using the standard sansung USB drivers. Im now trying to figure out how to stop those drivers from loading every time i plug in the YP-GI1.
In the meantime, I used ODIN to try and load the PIT and PDA rom image.
It appears to work but then the write fails (see attachment)
Any help would be appreciated - Thanks
.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=51762484 on heimdall did you follow my instructions on "----Installing device's driver for Hemidall----"? That's how I got it to install the correct drivers. Note: This is for restoring a YP-G1 (Galaxy Player 4.0) so don't use that restore file.
Is This Progress ?
obscuresword said:
http://forum.xda-developers.com/showthread.php?p=51762484 on heimdall did you follow my instructions on "----Installing device's driver for Hemidall----"? That's how I got it to install the correct drivers. Note: This is for restoring a YP-G1 (Galaxy Player 4.0) so don't use that restore file.
Click to expand...
Click to collapse
Hi
I couldnt get zdiag to pick up any driver, the word samsung_android briefly appears when i connect the usb cable to the device but by the time standard usb driver load, the zdiag drop down window is blank.
However, I tried Odin 3.0.7 with the pit and rom files and the device did flash sucessfully. Now the device boots and says sansung galaxy SII GT-9100G and a yellow triangle and stops there. I can boot the device into download mode but I cannot seem to get into recovery mode by holding power-home-vol+
Im not even sure if this is progress or whether I have used the wrong rom (which i doubt because it clearly stated it was for the galaxy 4.2 international version YP-GI1CW
I have taken a screenshot of the successful flash.
Thanks for talking the time to help me. Im a little stuck now as I dont know what to do next.
Cheers -xdanewbie
xdanewbie2014 said:
Hi
I couldnt get zdiag to pick up any driver, the word samsung_android briefly appears when i connect the usb cable to the device but by the time standard usb driver load, the zdiag drop down window is blank.
However, I tried Odin 3.0.7 with the pit and rom files and the device did flash sucessfully. Now the device boots and says sansung galaxy SII GT-9100G and a yellow triangle and stops there. I can boot the device into download mode but I cannot seem to get into recovery mode by holding power-home-vol+
Im not even sure if this is progress or whether I have used the wrong rom (which i doubt because it clearly stated it was for the galaxy 4.2 international version YP-GI1CW
I have taken a screenshot of the successful flash.
Thanks for talking the time to help me. Im a little stuck now as I dont know what to do next.
Cheers -xdanewbie
Click to expand...
Click to collapse
First you would need to take the right package for your device as I explicitly written it was made for YP-G1 only. (See the YP-G1CW) you would need in that case, something so you can fully restore your device. Maybe you can find it in the 4.2 general forum.
And even so you said it was made for the 4.2, the file says it's for YP-G1 a.k.a the 4.0.
Envoyé de mon Nexus 7 en utilisant Tapatalk
xdanewbie2014 said:
Hi
I couldnt get zdiag to pick up any driver, the word samsung_android briefly appears when i connect the usb cable to the device but by the time standard usb driver load, the zdiag drop down window is blank.
However, I tried Odin 3.0.7 with the pit and rom files and the device did flash sucessfully. Now the device boots and says sansung galaxy SII GT-9100G and a yellow triangle and stops there. I can boot the device into download mode but I cannot seem to get into recovery mode by holding power-home-vol+
Im not even sure if this is progress or whether I have used the wrong rom (which i doubt because it clearly stated it was for the galaxy 4.2 international version YP-GI1CW
I have taken a screenshot of the successful flash.
Thanks for talking the time to help me. Im a little stuck now as I dont know what to do next.
Cheers -xdanewbie
Click to expand...
Click to collapse
Did you try getting the 4.2 drivers from Samsung Kies and then using zadig? Also it seems like you're using an S2 restore, which isn't for your device. The comment I linked you to is for restoring a YP-G1 so you would have to get the right heimdall package for your 4.2 like zaclimon said.
Sent from my YP-G1 using XDA Free mobile app
zaclimon said:
First you would need to take the right package for your device as I explicitly written it was made for YP-G1 only. (See the YP-G1CW) you would need in that case, something so you can fully restore your device. Maybe you can find it in the 4.2 general forum.
And even so you said it was made for the 4.2, the file says it's for YP-G1 a.k.a the 4.0.
Envoyé de mon Nexus 7 en utilisant Tapatalk
Click to expand...
Click to collapse
Yep, Im officially an idiot. I did not even know the firmware was for the 4.0. I had missed the different between the YP-G1 and theYP-GI1
I have now found the correct rom here
http://forum.xda-developers.com/showthread.php?t=1884071
However, i have tried every version of Odin from 1.3 to 3.0.9 and they all fail to complete the Nand write (see below)
I have tried 2 pc's with 2 cables and all versions of Odin.
Any other pointers would be appreciated.
Thanks - xdanewbie
xdanewbie2014 said:
Yep, Im officially an idiot. I did not even know the firmware was for the 4.0. I had missed the different between the YP-G1 and theYP-GI1
I have now found the correct rom here
http://forum.xda-developers.com/showthread.php?t=1884071
However, i have tried every version of Odin from 1.3 to 3.0.9 and they all fail to complete the Nand write (see below)
I have tried 2 pc's with 2 cables and all versions of Odin.
Any other pointers would be appreciated.
Thanks - xdanewbie
Click to expand...
Click to collapse
I think you are going to have to use Heimdall for this. Try and get the drivers installed for this device, and see if zadig picks it up.
Day 4
Hi
OK. It appears that I can either setup my PC to Use Heimdall (which requres the samsung KIES drivers NOT to be installed) or Odin (which requires the drivers to be installed)
I have now deinstalled the kies usb drivers, run drivecleanup to remove the old usb entries and downloaded Heimdall 1.3.1. When I run zdiag it picks up the samsung usb driver and install the heimdall driver.
Im trying now to use the rootted rom available (which seems ok for odin) available at
http://forum.xda-developers.com/showthread.php?t=1884071
However, if I try to use it with Heimdall 1.3.1 it says missing firmware.xml
I have a friends galaxy 4.2 also. Is there any way to extract the required info from that device or can anyone give pointers to where i might find a heimdall package for the YP-GI1CWXEU
Thanks - xdanewbie
In my opinion...heimdall is a little more advanced as opposed to odin. I suggest you stick to Odin...the flash might have failed because you flashed the wrong files before. From your thread...I believe you will get the PIT file...flash that and then flash the ROM and if you want, the kernel.
EDIT: I tested Odin v3.04...and it works fine with my YP-GI1.
Sent from my XT760
drakonizer said:
In my opinion...heimdall is a little more advanced as opposed to odin. I suggest you stick to Odin...the flash might have failed because you flashed the wrong files before. From your thread...I believe you will get the PIT file...flash that and then flash the ROM and if you want, the kernel.
EDIT: I tested Odin v3.04...and it works fine with my YP-GI1.
Sent from my XT760
Click to expand...
Click to collapse
Hi
Thanks for your help. I have the rom from the link above but where would i get the pit file from ?
Thanks - xdanewbie
Update: I found the PIT file for the international 4.2 version. I used odin 3.04 with the pit file followed by the rom and my device its now working again Is there any way now to get rid of the Salaxy S2 logo ?
Either way, many thanks to all who helped and I hope this thread helps those who were as silly as I was !
Thanks - xdanewbie
To remove the yellow triangle, you need to use a USB JIG, google the term to know what I mean. There are no other ways to do the same.
Sent from my XT760
drakonizer said:
To remove the yellow triangle, you need to use a USB JIG, google the term to know what I mean. There are no other ways to do the same.
Sent from my XT760
Click to expand...
Click to collapse
Hi I used this usb jig which not nly removed the yellow triangle but thegalaxy S2 logo as well. My player now looks exactly like it did before.
http://www.ebay.co.uk/itm/Micro-USB...UK_Mobiles_Accessories_RL&hash=item4ab688d076
PS: For those who may be interested, 4.2 case seem very expensive. I purchased this (whch is for a galaxy S2) and its a perfect fit but you need to
extended the button holes with a dremel.
http://www.ebay.co.uk/itm/Luxury-Ge...lePhonesCasesPouches&var=&hash=item48626b4b8c
Many thanks to all those who have helped a newbie learn a little bit more.
xdanewbie