Hello guys,
I need some serious help here.
I opened my phone a couple of times and theres a horrible crunchy sound every time i touch the edge of my phone.So,guys,is there any way to glue my phone to be as it was before??
Sent from my XT910 using xda app-developers app
I used two sided tape, but it's still not perfect.
Cant find it in MNE,any other solutions
Sent from my XT910 using xda app-developers app
Bump!
Sent from my XT910 using xda app-developers app
bump
Sent from my XT910 using xda app-developers app
Bump
Sent from my XT910 using Tapatalk 2
I have opened one for replacing the LCD, didn't knew gluing back would be a problem :/
I think you can use those 3M double sided tapes for phones or 3M Digitizer Frame Adhesive Double Sided Stick Tape
Look them up on Amazon.
justFaisal said:
I have opened one for replacing the LCD, didn't knew gluing back would be a problem :/
I think you can use those 3M double sided tapes for phones or 3M Digitizer Frame Adhesive Double Sided Stick Tape
Look them up on Amazon.
Click to expand...
Click to collapse
Tnx for yrl reply, but at the moment i cant order anything(
Sent from my XT910 using Tapatalk 2
There're like 5-7$ with shipping
MarkelofRazr said:
Tnx for yrl reply, but at the moment i cant order anything(
Sent from my XT910 using Tapatalk 2
Click to expand...
Click to collapse
Then what do you want?
I have opened the og RAZR 910 several times for fun, and to revert the maxx batt upgrade. Usually, there is enough adhesive to restick.
This cover is obviously not held on by much and is barely functional as a dust cover. Make sure it's snapped on tight, use a little heat(hair dryer) to refresh what is left if the stock adhesive, and/or add some tape as has been suggested. You could probably use viscous adhesive putty sometimes found in reusable closure packaging; look around, and you sure to find something suitable. There are plenty of online stores that will sell OEM replacement parts for reasonable prices as well.
Sent from my Nexus 7 using xda app-developers app
Related
Hello, I've found a magnet case on eBay and I wonder if it's safe to use it on the Galaxy Tab 2 7.0, or the magnet can damage anything in the tablet? I've liked the case because it's really slim, and seems well built.
Thank you,
Alexandre.
Sent from my GT-I9100 using xda app-developers app
I use this one posted in an earlier post www.amazon.com/MoKo-Samsung-Galaxy-Elastic-MicroSD/dp/B0083OYIBW/ and it has magnets. So far no issues.
Sent from my GT-P3113 using Tapatalk 2
Can't see why not , i use one on my phone and never had any issues with it. Obviously if you look after your device and don't knock it around you should be good.
Hahaha Yeah, I'm really careful with my stuff =) I thought about that because I remembered that on the past you could mess with some TVs by putting a magnet near to it. But if it's safe with a tablet, great =D
Thanks!
Sent from my GT-I9100 using xda app-developers app
Magnets normally only hammer tubes. LCD is pretty good to go unless you (like I did) put a chair leg through it. Worst feeling in the world. And let me add that replacing a digitizer sux big time. tiny connectors waiting to be broken. :banghead:
Sent from my GT-P3113 Romswell v1.0 using Tapatalk 2
Gamer819 said:
..... unless you (like I did) put a chair leg through it. Worst feeling in the world. .... :banghead:
Sent from my GT-P3113 Romswell v1.0 using Tapatalk 2
Click to expand...
Click to collapse
Sorry but that made me laugh out loud for real !!! Yeah i can imagine the feeling....ooooh dear :crying:
I have the oem case of Samsung but for tab1 and i use it for tab2 and it has a magnet !!!
Sent from my GT-P5100 using xda app-developers app
Well, if the Original Samsung has a magnet, I think I can't go wrong with one alike... Thanks guys!
Sent from my GT-I9100 using xda app-developers app
My poetic folio style case has magnets to hold the cover closed and I haven't noticed any problems
Covers with magnets don't have any immediate effect. but due to constant hammering on the tab it may create problems later on. so in my opinion y to take risk when u can get better covers
magnets will do no harm.
Ya i m using.
Sent from my GT-P3100 using xda premium
Souron29 said:
Covers with magnets don't have any immediate effect. but due to constant hammering on the tab it may create problems later on. so in my opinion y to take risk when u can get better covers
Click to expand...
Click to collapse
No more than the "constant hammering" your fingers do to the screen
My s3 screen is the perfect size for me feals like a mini tablet only problem is im worried it will break.
Now should i get an otterbox or anouther case to protect it?
I've been rocking with the cruzerlight TPU case for a while now and it does wonders. Doesn't make it too thick, adds grip, and is very protective, check it out
http://www.cruzerlite.com
Sent from my Nexus 7 using xda premium
Thanks
Sent from my GT-S5830i using xda premium
Grab an Otterbox Commuter or Urban Armor Gear which provide u max protection. Otterbox provide better protection while UAG have better looking.
Sent from my GT-I9300 using xda premium
I have a simple plastic case that is more about the look than anything else. I've dropped it a 1/2 dozen times and have had no problems so far.
Sent from my GT-I9300 using xda app-developers app
crazedzealot said:
I have a simple plastic case that is more about the look than anything else. I've dropped it a 1/2 dozen times and have had no problems so far.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
Welln i have a tough and ruff job i do not sit at a desk alk day like some and i need my phone to stay brand new so i can watch youtube on my lunch break.
Sent from my SGH-T999 using xda app-developers app
with33 said:
Welln i have a tough and ruff job i do not sit at a desk alk day like some and i need my phone to stay brand new so i can watch youtube on my lunch break.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
Yeah, I hear McDonalds is tough!
poplectic said:
Yeah, I hear McDonalds is tough!
Click to expand...
Click to collapse
Haha so funny....
Anyways lets stay on topic please and talk about the case issue i'm currently having.
Sent from my SGH-T999 using xda app-developers app
with33 said:
Haha so funny....
Anyways lets stay on topic please and talk about the case issue i'm currently having.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
Dont worry man.
Its gorilla glass... wont break so easily.
I already dropped mine a hundred times. It hasnt got even a scratch.
Still, if you want to protect it that much, use a screen protector and put a case around your phone that covers your phone a little from front. This way, even if your phone falls, your screen will not have direct contact with ground and it wont break.
Bump lol.
Sent from my SGH-T999 using xda app-developers app
Jaskaran498 said:
Dont worry man.
Its gorilla glass... wont break so easily.
I already dropped mine a hundred times. It hasnt got even a scratch.
Still, if you want to protect it that much, use a screen protector and put a case around your phone that covers your phone a little from front. This way, even if your phone falls, your screen will not have direct contact with ground and it wont break.
Click to expand...
Click to collapse
Bro, are you serious that you had drop your S3 for a hundred times? I had watch drop test video from Youtube, the S3 broke once it's drop. But I admit that gorilla glass 1 had a very strong screen. But not gorrila glass 2 which using in S3. Correct me if I had wrong. :laugh:
Bump.
Sent from my SGH-T999 using xda app-developers app
lvoonjian8888 said:
Bro, are you serious that you had drop your S3 for a hundred times? I had watch drop test video from Youtube, the S3 broke once it's drop. But I admit that gorilla glass 1 had a very strong screen. But not gorrila glass 2 which using in S3. Correct me if I had wrong. :laugh:
Click to expand...
Click to collapse
Depends on what angle it drops.
@OP, Otterbox Commuter and forget about the phone, will be protected forever.
with33 said:
Bump.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
My screen is very shiny but I'm afraid it will scratch. Should I buy a screen protector?
Seriously man, just buy a case.
Sent from my GT-I9300 using xda premium
get a flip case and screen protector for best protection
I should add i have a jelly case but i need more protection i have a small scratch in my screen already from a light fall.
Idc what peiple say about gorrila glass its just more flexable glass tbh still breaks amd scratches very easily.
Sent from my SGH-T999 using xda app-developers app
Jbluna said:
I've been rocking with the cruzerlight TPU case for a while now and it does wonders. Doesn't make it too thick, adds grip, and is very protective, check it out
http://www.cruzerlite.com
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
Which one did you get?
Droidguy987 said:
Which one did you get?
Click to expand...
Click to collapse
I got the clear andy one for my s3, kinda regret the color choice since bubbles keep appearing under the back
Sent from my SPH-L710 using xda premium
cracked screen other day.....i have an old thunderbolt that wont power on so i want to use that digitizer. do i still need adhesive tape or will the tape still be good on the old digitzer after heating?
any other tips when replacing?
thanks
djcyph said:
cracked screen other day.....i have an old thunderbolt that wont power on so i want to use that digitizer. do i still need adhesive tape or will the tape still be good on the old digitzer after heating?
any other tips when replacing?
thanks
Click to expand...
Click to collapse
You will need new tape. The old tape will be torn and peel pretty bad when you pull it up.
Sent from my ADR6400L using Tapatalk 2
thanks dood!
I've known of people being able to reuse the tape, but I agree. Definitely have some extra adhesive just in case.
Sent from my ADR6400L using xda premium
RBarnett09 said:
I've known of people being able to reuse the tape, but I agree. Definitely have some extra adhesive just in case.
Sent from my ADR6400L using xda premium
Click to expand...
Click to collapse
I agree with this. Better to just get it anyway because seriously how often can tape be applied and reused. Just saying....
Sent from my ADR6400L using Tapatalk 2
Can anyone point me in the direction of a guide or video on how to swap out a cracked screen? I have the screen and tools necessary.
Thanks guys
Sent from my ADR6425LVW using xda app-developers app
agentofchaos said:
Can anyone point me in the direction of a guide or video on how to swap out a cracked screen? I have the screen and tools necessary.
Thanks guys
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
If you search for "rezound screen replacement" on YouTube there's quite a few step by step videos.
Sent from my ADR6425LVW using xda premium
zac41189 said:
If you search for "rezound screen replacement" on YouTube there's quite a few step by step videos.
Sent from my ADR6425LVW using xda premium
Click to expand...
Click to collapse
The ones I've seen don't show a reassemble portion :/
Sent from my ADR6425LVW using xda app-developers app
agentofchaos said:
The ones I've seen don't show a reassemble portion :/
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
I did this and failed. Proceed with caution.
Sent from my Rezound using Tapatalk 2
replace
agentofchaos said:
Can anyone point me in the direction of a guide or video on how to swap out a cracked screen? I have the screen and tools necessary.
Thanks guys
Sent from my ADR6425LVW using xda app-developers app
Click to expand...
Click to collapse
Used one of the youtube vids for dis-assembly. Re-assembly is basically just the same steps in reverse. The most difficult part was lining up the placement of the digitizer on the LCD. If you don't get this right, the screen will not fit properly. I had to somewhat set the pieces together all in place loosely to get the alignment right (lcd sitting in the slot with the digitizer somewhat in place in the front bezel), and then take them apart and secure them together better to ensure a proper fit if that makes sense. My first try - lining thing up by eye - was not quite right. I used some 3M 2mm adhesive I ordered along with the tools. Taking the digitizer off is a bear, it takes quite a bit of patience and a bit of force. Reseating the cables is also a pain, use the plastic pry tool to help reseat, and have LOTs of patience during the whole process. Make sure to give yourself a solid hour or more. I just broke my second screen today with a beer bottle of all things, so I'll have to redo this whole process here shortly. Also make sure the front of the LCD and back of the digitizer are very clean, and the adhesive is lined up properly and not blocking sensors. I didn't do this well, and have a slight bit of adhesive sticking out the bottom side about 1mm into the visible area of the LCD, and the back of the digitizer is noticeably "gunky" in the front camera region, which I think is also causing some issues I'm having with the front proximity sensor. Hopefully I'll do a better job this next time. Good luck!
Oh my Chad.... Lol
Definitely out of my skill.
...any recommendations of what type of phone repair shop I should look into? I went to an iPhone based, but "smartphone" capable repair shop and he definitely didn't know what to do. He said it would cost 70$ and that it would be risky...... Not something I'm about to shell out 70$ for especially when I already have the replacement screen
Sent from my Rezound using xda app-developers app
agentofchaos said:
Oh my Chad.... Lol
Definitely out of my skill.
...any recommendations of what type of phone repair shop I should look into? I went to an iPhone based, but "smartphone" capable repair shop and he definitely didn't know what to do. He said it would cost 70$ and that it would be risky...... Not something I'm about to shell out 70$ for especially when I already have the replacement screen
Sent from my Rezound using xda app-developers app
Click to expand...
Click to collapse
Bump
Sent from my Rezound using xda app-developers app
agentofchaos said:
Bump
Sent from my Rezound using xda app-developers app
Click to expand...
Click to collapse
I've seen a couple places online that you can send your phone to and they'll replace the screen and ship it back to you within a few days. Never tried a site like that tho and could be kinda sketchy but that's an option. Also here in Albuquerque there are tons of Craigslist ads for screen replacement here in town so you could check your city's page and see what you find.
Sent from my Rezound using xda premium
I did this very thing last week successfully with no problems. Follow the repair video by repair universe on YouTube to the letter and you will do just fine. The key is to take your time and make sure the phone is heated enough with the hair dryer or heat gun to ensure that the adhesive comes apart smoothly. Take extra special precaution not to crack the LCD screen when removing the glass (digitizer) from it
If you're not willing to take the chance, you could always send it to me (for free) but I can't guarantee a flawless victory
agentofchaos said:
Oh my Chad.... Lol
Click to expand...
Click to collapse
I see what you did there...
If you decide to repair your screen yourself, there are also four transparent pieces of plastic that you need to put on the new screen.
They are for the capacitive buttons, so they redirect the light from the lights on the motherboard to the buttons.
Unless you don't want lights, of course. (I forgot to put them on mine lol, but I don't mind having no lights)
Also, when you put it back together, make sure to seal it very well on the outside so water doesn't get in and screw up the digitizer. You may have to use glue or something else as a sealant.
Every time it rains, my digitizer gets messed up from water getting in. (crossing my fingers for no permanent damage)
Sent from my HTC Rezound using Tapatalk 2
Hi ,
After i cracked my digitizer i tried to avoid from paying 300$ for fixing it.
I ordered "OEM HTC Droid DNA LCD Screen and Digitizer Assembly with Front Housing" - all the parts are already in one unit and factory glued (Digitizer, LCD and Front Housing)
Making the job less complex - no need to glue anything
btw
I did the order from http://www.etradesupply.com - very fast shipping and great service .
now few tips :
1. very hard to open the back cover of the phone in the first time ( it's glued to the loud speaker - need to be patient ).
2. there are 3 antenna cables : 1 of the wireless , and 2 of the camera flash i think - be very gentle to them, they are very sensitive.
3. Remember to remove the "Ear Speaker" from your old phone - it's not part of the new screen ( I forgot it and needed to reopen my phone )
4. Have fun !
If you have questions, i will more then happy to answer :good:
btw #2
If someone want my old parts (Cracked digitizer - fully working, fully working LCD screen and my old front housing - PM me , will discuss on good price to both of as.
Thanks for the post. I just cracked my screen last week and looking at different ways to fix it.
Does anyone know if they have this same part in white for sale anywhere? I want a white screen on my DNA but all I have been able to find are ones that don't come with the earpiece.
Saw on ebay.. but it without the housing..only digitzer and lcd
Sent from my HTC6435LVW using xda premium
Cool
Sent from my HTC6435LVW using xda premium
I bought the lcd and digitizer separate. Then realized I didn't have the adhesive to glue it all back together. Wish I went the whole front panel way..
Same here, I ended up buying the whole housing pre-assembled. Even when I third to glue it the slightest pull on the ribbon cable and part of the screen is unresponsive.
Sent from my HTC6435LVW using Tapatalk 4
Title is misleading ...digitizer only was never replaced ...
sent from my GE RED DNA \m/
munchy_cool said:
Title is misleading ...digitizer only was never replaced ...
sent from my GE RED DNA \m/
Click to expand...
Click to collapse
I'm getting my cracked screen fixed tomorrow at a local phone repair shop and they only ordered the digitizer... Ill see how it goes
Sent from my HTC6435LVW using xda premium
Just replace my screen with the HTC butterfly screen. Looks much better without the Verizon branding imo
Sent from my HTC6435LVW using xda app-developers app
I've got a cracked screen and was thinking about doing this... Wanted to ask how much experience (if any) you had doing this kinda stuff and also how long it took you. Also did you see any adverse effects (such as loose back, volume rocker, etc) from doing this?
Sent from my HTC6435LVW using Tapatalk 4
crookx said:
Just replace my screen with the HTC butterfly screen. Looks much better without the Verizon branding imo
Sent from my HTC6435LVW using xda app-developers app
Click to expand...
Click to collapse
Post pics
Sent from my HTC6435LVW using xda premium
BigMace23 said:
I've got a cracked screen and was thinking about doing this... Wanted to ask how much experience (if any) you had doing this kinda stuff and also how long it took you. Also did you see any adverse effects (such as loose back, volume rocker, etc) from doing this?
Sent from my HTC6435LVW using Tapatalk 4
Click to expand...
Click to collapse
If you planning to buy the same part as i did, it's more easy.
Basic exp with tools suppose to be enough from my point of view.
Regarding the time, it's took me 2 hours - i had to open the phone again, cuz i forgot to place the ear speaker
For the adverse effects:
Back cover - not loose at all, it's connected with hhard plastic clips.
Volume rockers and power bottom - working as before.
One issue that i found, is the charging led, i forgot to takw it out from my old housing
Sent from my HTC6435LVW using xda premium
firespitta said:
Post pics
Sent from my HTC6435LVW using xda premium
Click to expand...
Click to collapse
Love how the red buttons match the rest of the phone.
Sent from my HTC6435LVW using xda app-developers app
crookx said:
Love how the red buttons match the rest of the phone.
Sent from my HTC6435LVW using xda app-developers app
Click to expand...
Click to collapse
ThAts nice
Sent from my DROID RAZR using xda premium
---------- Post added at 07:52 AM ---------- Previous post was at 07:52 AM ----------
crookx said:
Love how the red buttons match the rest of the phone.
Sent from my HTC6435LVW using xda app-developers app
Click to expand...
Click to collapse
Where did u buy this?
Sent from my DROID RAZR using xda premium
Yes. I'd like to know too
Sent from my HTC6435LVW using XDA Premium 4 mobile app
Hi
I got a white screen with red soft keys advertised for the 920e from eBay. Images here,
http://forum.xda-developers.com/showthread.php?p=44703091
I also agree the OP has a very misleading title for this post. It sounds like they are saying they separated their glass from the LCD and reused it. This is not the case. Not only did the OP replace the digitizer and the LCD but they also replaced the housing.
Great tips tho on removing parts.
~Hoovie
Sent from my HTC6435LVW using xda app-developers app
Now I'm confused. I thought the digitizer was fused to the glass, but the LCD is a separate part. I see plenty of eBay listings for the glass+digitizer(with soft keys). You're saying if one were to buy that they'd have to glue it to the LCD? I'm skeptical that these 3rd party Chinese products actually use gorilla glass 2 and the same highly sensitive digitizer as HTC's, including the 5" 1080p LCD would make me even more nervous about quality.
thehoovie said:
Hi
I got a white screen with red soft keys advertised for the 920e from eBay. Images here,
http://forum.xda-developers.com/showthread.php?p=44703091
I also agree the OP has a very misleading title for this post. It sounds like they are saying they separated their glass from the LCD and reused it. This is not the case. Not only did the OP replace the digitizer and the LCD but they also replaced the housing.
Great tips tho on removing parts.
~Hoovie
Sent from my HTC6435LVW using xda app-developers app
Click to expand...
Click to collapse
http://item.mobileweb.ebay.com/viewitem?itemId=300894844116
Would be nice If you could use this too
Lol
Sent from my SCH-R970 using xda premium
i wanna buy charging cover, part 4,76$ but shipping 34,18$ how foolish...
drumz0rz said:
Now I'm confused. I thought the digitizer was fused to the glass, but the LCD is a separate part. I see plenty of eBay listings for the glass+digitizer(with soft keys). You're saying if one were to buy that they'd have to glue it to the LCD? I'm skeptical that these 3rd party Chinese products actually use gorilla glass 2 and the same highly sensitive digitizer as HTC's, including the 5" 1080p LCD would make me even more nervous about quality.
Click to expand...
Click to collapse
The LCD is a separate part, but I heard about how it is difficult separating the LCD from the glass. http://www.youtube.com/watch?feature=player_detailpage&v=fTqPqh0fNkQ#t=559 at 9 :17 starts to show the front coming off. When I did mine, as my glass was broken, there was no really saving the LCD.
I cant tell the difference between my replacement, from a USA seller, than the original LCD.
Zarboz said:
http://item.mobileweb.ebay.com/viewitem?itemId=300894844116
Would be nice If you could use this too ...
Click to expand...
Click to collapse
No doubt, but Can Not. That eBay listing has errors. It says the x920e in the listing but it can not be. That listing is for a back cover with an SD card. The x920d and the HTL21 have SD cards and a larger cut out on the top of the back cover. The x920e and the DNA have no cut outs are are a couple mms shorter than the other two. Now this one you can use. http://www.ebay.com/itm/290940405280