Total Noob, not sure what I did.
Long story short, rooted my Galaxy Tab 10.1 wifi (p7510) tonight.
Saw a video on how to flash 4.1 onto my tab here: http://www.youtube.com/watch?v=KRjl7zh551w
followed the instructions from the video, it linked to http://forum.xda-developers.com/showthread.php?t=1787399
downloaded the latest nightly from http://get.cm/?device=p4wifi
(cm-10.1-20130124-NIGHTLY-p4wifi.zip )
and the gapps from mirror 1 at http://forum.xda-developers.com/showthread.php?t=1787399
(gapps-jb-20120729.zip)
There was probably my mistake
In any case, i wiped everything, flashed the CM10 and gapps.
On reboot I got 2 error messages,
"Unfortunately, the process com.google.process.gapps has stopped." ok
"Unfortunately, Setup Wizard has stopped." ok (loops forever)
Now I have no idea how to recover from this point.
I tried to re-wipe and re-flash my old functioning ICS root and it still reboots into CM loading screen and setup wizard loop
Also, if i attempt to install zip from sdcard my options are:
0/
legacy/
obb/
legacy and obb contain no files and I have to navigate down a couple of layers of 0/ to reach my original root.
Probably screwed myself royally, but I guess that's how you learn. Any advice on how to salvage my tab?
Update*
Restore finds no files to restore
used odin for TWRP instead of CM, still no luck at restoring.
Won't mount USB, so I don't know how to transfer over a different gapps to see if that would solve the problem.
Revert to stock 4.0.4 through odin and start over. Probably be the easiest. I've had to a few times and yes it's how you/we all learn...
Firmware Here
nighthorns said:
Total Noob, not sure what I did.
Long story short, rooted my Galaxy Tab 10.1 wifi (p7510) tonight.
Saw a video on how to flash 4.1 onto my tab here: http://www.youtube.com/watch?v=KRjl7zh551w
followed the instructions from the video, it linked to http://forum.xda-developers.com/showthread.php?t=1787399
downloaded the latest nightly from http://get.cm/?device=p4wifi
(cm-10.1-20130124-NIGHTLY-p4wifi.zip )
and the gapps from mirror 1 at http://forum.xda-developers.com/showthread.php?t=1787399
(gapps-jb-20120729.zip)
There was probably my mistake
In any case, i wiped everything, flashed the CM10 and gapps.
On reboot I got 2 error messages,
"Unfortunately, the process com.google.process.gapps has stopped." ok
"Unfortunately, Setup Wizard has stopped." ok (loops forever)
Now I have no idea how to recover from this point.
I tried to re-wipe and re-flash my old functioning ICS root and it still reboots into CM loading screen and setup wizard loop
Also, if i attempt to install zip from sdcard my options are:
0/
legacy/
obb/
legacy and obb contain no files and I have to navigate down a couple of layers of 0/ to reach my original root.
Probably screwed myself royally, but I guess that's how you learn. Any advice on how to salvage my tab?
Update*
Restore finds no files to restore
used odin for TWRP instead of CM, still no luck at restoring.
Won't mount USB, so I don't know how to transfer over a different gapps to see if that would solve the problem.
Click to expand...
Click to collapse
I am in exactly the same situation as you, same build same gapps, same problem.
To help you out, in recovery (CWM) you can mount /data, then using adb on you computer you can push stuff to the "sdcard" via the command "adb push C:\Some\Local\File.zip /data/media/0/File.zip"
Same problem for me. I installed CM10.1 without gapps and it worked without problems. I also tried with different versions of gapps and give all the mentioned problem.
"Unfortunately, the process com.google.process.gapps has stopped." OK
"Unfortunately, Setup Wizard has stopped." ok (loops forever)
Does anyone have a solution to this problem.
Thx
Help required if possible!
Hello all, joined just to post here.
I'm having the same issues as detailed in the first post.
A lot of the solutions that I've seen recommend going into settings and turning syncing off but the error messages block me from accessing anything. It eventually just seems to crash itself and turn off anyway, which is probably due to being bombarded with error message popups.
Is there a simple way to fix this without doing a full reset back to 4.0.4 or is that my only choice?
If so then I'm in trouble because I followed the link that mrhiab provided but I can't see which firmware there is the one I need (wifi only galaxy tab 10.1 P7510 uk).
Is the cause of this problem that the version of gapps I installed is broken and causes errors as it worked fine without gapps?
If anyone can answer any of those questions then I'd really appreciate it. I've semi broken my girlfriends tab and she's not too happy lol!
UPDATE/SOLVED:
Just thought I'd comment back and say that I've solved the problem.
I simply reflashed the CM by putting the tab into install mode again but didn't add gapps. After rebooting I noticed that it worked okay so I tried to find another release of gapps and tried that...it worked perfectly - no errors no nothing!
Sorry for the initial noob-post!
same problem as you
sir ... i also have the same problem as you ... i've been searching on almost all sites ... still i can't see any issues that can solve my problem.1st was "unfortunately, google.com.pro ..." then next was "unfortunately, setup wizard has stopped." this results everytime i reboot my galaxytab 2 10.1 .. im on JB 4.1.1 .. and i just followed the guide of sir codeworkx. please lend me a solution.
BTW midgard .. how did you flash CM again w/o the gapps ? because when i go to install zip from sd card ... there's nothing in there .. just obb and stuffs said by the thread maker.
I will appreciate suggestions ... Thanks in advance
I hope some suggestions may come up eventually
I found a way on installing cyanogenmod 10 on my Galaxy tab 2 10.1 by not installing gapps at the same time while installing the CM10 .. but eventually, i found out i don't have any google playstore .. and that's when i googled on how to have one. I found a video saying i could have it by just going to there website via my tablet goo-apps .. then download the existing gapss for my JB 4.1.1 .. and then flash it .. but then again ... the error of the Unfortunately, setup wizard stopped came up again ... help
and thanks midgard !!!
Can I get help
midgar777 said:
Hello all, joined just to post here.
I'm having the same issues as detailed in the first post.
A lot of the solutions that I've seen recommend going into settings and turning syncing off but the error messages block me from accessing anything. It eventually just seems to crash itself and turn off anyway, which is probably due to being bombarded with error message popups.
Is there a simple way to fix this without doing a full reset back to 4.0.4 or is that my only choice?
If so then I'm in trouble because I followed the link that mrhiab provided but I can't see which firmware there is the one I need (wifi only galaxy tab 10.1 P7510 uk).
Is the cause of this problem that the version of gapps I installed is broken and causes errors as it worked fine without gapps?
If anyone can answer any of those questions then I'd really appreciate it. I've semi broken my girlfriends tab and she's not too happy lol!
UPDATE/SOLVED:
Just thought I'd comment back and say that I've solved the problem.
I simply reflashed the CM by putting the tab into install mode again but didn't add gapps. After rebooting I noticed that it worked okay so I tried to find another release of gapps and tried that...it worked perfectly - no errors no nothing!
Sorry for the initial noob-post!
Click to expand...
Click to collapse
I still have that "Unfortunately, Setup Wizard has stopped" loop-message, can somebody help me please!
Related
All,
I started this thread here since i did not get a resolution to my problem by looking around all forums.
I am getting this error pop up "Process com.android.phone has stopped unexpectedly" and i tried everything still iam getting this error.
1) I tried all those methods posted on forums like clear data on Manage Applications>phone and still getting this error.
2) I also booted into CWM recovery and cleared Cashe,Wiped Davlik Cashe and then fixed permissions and did a reboot. I still got this error message.
3) I get this error while iam using the phone and also when i reboot my device
The fall back of this error is my Galaxy Rom v5.1 OS hangs some times and all my icons in home screen are removed and i need to add icon to my home screen each time i do a restart of my phone. Any help is much appreciated.
Phone:Samsung Galaxy SII I9100G
OS:Galaxy Rom v5.1 (deodexed)
Kerner:Lucifr v1.6
Completely rooted and hve Titanium Backup Pro installed.
Thanks
Ajith
well kcajith
not sure if i will help but the easiest way to fix your problem is reflash the rom. Do a backup with titanium backup pro then reflash. But this problem usually happens when you mess with phone.apk. so with root explorer, open system then app,now navigate to p and find phone.apk. Check if the permissions are set correctly.
U need to find other phone.apk (from other deodex rom) n replace it in ur system/app..
Sent from my GT-I9100G using Tapatalk 2
Fixed: Reflashed my GalaxyRom v5.1
Thanks folks...I reflashed my GalaxyRom v5.1 and did not face this issue again..I did take a back up thru TI.
if u backup again using tb the prblm will occur again,this is not a new thread and ppl reported this pblm many times...
Hello guys,
I tried the new version gapps-jb-20121128-signed.zip with CM10, but it is not recommended. The playstore will not work anymore and the keyboard process will stop.
Question, flash doesn't work in the browser? I installed gapps-jb-20120726-signed.zip several times but still flash is not working.
Somebody any idea how to solve this?
Foster Basic said:
Hello guys,
I tried the new version gapps-jb-20121128-signed.zip with CM10, but it is not recommended. The playstore will not work anymore and the keyboard process will stop.
Question, flash doesn't work in the browser? I installed gapps-jb-20120726-signed.zip several times but still flash is not working.
Somebody any idea how to solve this?
Click to expand...
Click to collapse
Hi,
Managed to solve this issue by reinstalling the previous gapps and then reinstalling the firmware. Hope this info helps.
gapps-jb-20121128-signed.zip - I also had problem with this update
Foster Basic said:
Hello guys,
I tried the new version gapps-jb-20121128-signed.zip with CM10, but it is not recommended. The playstore will not work anymore and the keyboard process will stop.
Question, flash doesn't work in the browser? I installed gapps-jb-20120726-signed.zip several times but still flash is not working.
Somebody any idea how to solve this?
Click to expand...
Click to collapse
I also had problem with this update!!!!!!!
Problem with 28 Nov. GooManager received update for Jandycane 1.8
(updates jandycane 20121020 and gapps 20121011 done on 09/11/12)
........................
On 28 November GooManager automatically downloaded the following: gapps-jb-20121128-signed.zip
On the 29 November I flashed this on my first gen. Kindle Fire
As follows:
first did a Backup then wiped Cache and Dalvik and then started update - gapps-jb-20121128-signed.zip
after starting update got a Dalvik cache Directories wipe complete message (then)
Verifying Filesystem....
Verifying partition sizes...
Install ........ gapps-jb-20121128-signed.zip
Finding update package
installing
......
......
(and finally)
Installation Complete!
(then once again under this the texts)
Verifying Filesystem....
Verifying partition sizes...
But there it seems to have stopped (completed?)
And under in TWRP I have the options: Wipe Cache/Dalvik - Home - Reboot System
I decided to choose Reboot system
The following happened:
I got a message "upgrading Android apps"
then it started in the normal ("turning mirror bits") loading window
then the usual password window
but the keyboard wouldn’t open!!! I couldn’t get past the password window
also I notice that the WLAN was no longer on/active (it had been on during the process)
I tried several reboots – still the same
I eventually decide to do a restore of Backup – this was successful!
I have no idea what is or went wrong
Is there something wrong with this gapps-jb-20121128-signed.zip it certainly seems like it?????????
Any other experiences?
I've had the exact problems you both describe running a clean flash of nightly with CM10 on a Nook Color. Everything is great until gapps-jb-20121128-signed.zip is loaded, then keyboard is disabled, crashes, etc.
http://goo.im/gapps/gapps-jb-20121128-signed.zip appears to have been removed from goo.im
gyrfalcon said:
I've had the exact problems you both describe running a clean flash of nightly with CM10 on a Nook Color. Everything is great until gapps-jb-20121128-signed.zip is loaded, then keyboard is disabled, crashes, etc.
http://goo.im/gapps/gapps-jb-20121128-signed.zip appears to have been removed from goo.im
Click to expand...
Click to collapse
Hi, and thanks for replying - now I know for sure it wasn't me that screwed up, wasn't sure!
Glad to hear that it has been removed - but that's really bad - sending out a really bad update like that - lucky we didn't end up with Bricked devices - really frustrating and not a nice thought at all - I'm really grateful for whoever it is that does all this work...but...putting something like that out ... that is scary ........ don't know if I will now trust the next download(s)!!!!!!!!
who is it that does these gapps anyway?
Hi,
I do not have enough posts to post in the cyanogenmod nightlies thread to get a definitive answer, hence why this subforum. I guess my question may be rom independent anyway.
I 'upgraded' from an M release of cyanogenmod to a nightly and buggered my phone. I was forced to flash the stock firmware and then reflash the nightly to fix everything. Except my camera shows a black screen (behind the onscreen focus and options) and force closes nearly all the time. I thought it was just the nightly, but 2 months and 20+ new nightlies later, I still have the issue. In the nightles dev thread, people say the camera is fine. I know the hardware is fine, because 1 in 40 tries the camera randomly works.
I tried a factory wipe, which I now know just wipes user data. So In CWM, under 'mounts and storage' I formatted everything I could and did another factory reset, cache etc. No fix.
I guess this issue is with the rom itself, if the camera is force closing? So I'll have to use Odin or such to flash a stock rom again and flash another cyanogenmod version? But I want to check this is correct before continuing, and how I can completely wipe any trace of the current rom before flashing the stock and another nightly - so I don't get this issue again.
Thanks
So I finally found the issue, after battling with heimdall on ubuntu 14.04 for hours. Its a hardware problem.
I'm just going to leave my experience here in case someone else has the same issue, since anything to do with all the issue I am about to describe don't seem to be documented anywhere on the web clearly.
Firstly, I battled with heimdall 1.3.2 to recognise my phone on ubuntu. I kept getting;
Code:
ERROR: Failed to receive response!
After a number of threads talking about installing usblibx drivers I found one about which libs to install from terminal;
Code:
sudo apt-get install libXXXX
Code:
libusb-ocaml
libdevice-usb-perl
libhpmud0 (not sure if it's essential)
libusb-0.1-4
libusb-1.0-0
libusb-1.0-0-dev
libusb-dev
libusbprog-dev
libusb++-0.1-4c2
libusb++-dev
libusbtc08-1
libusbmuxd-dev
libusbprog0
libusbmuxd1
I installed all but couldn't find libusbmuxd1, restarted anyway, to the same error. I purged heimdall 1.3.2 and instead installed it from the Ubuntu software centre, which using
Code:
sudo apt-cache policy heimdall
showed that I had version 1.4 installed. Then I managed to find
Code:
libusbx-1.0.14_1.0.14-1_amd64.deb
floating somewhere on the internet, which finally installed the proper libusb stuff and allowed heimdall to continue without the error message.
I made a .pit file from my phone. I recommend this first. After hours searching for a stock rom (samsung has removed most of its firmware downloads? and asked links to be removed on other sites!?) came across this site
(I can't post links as a new user) - google [TUTORIAL] Flashing i9000, i9100 or i9300 with Heimdall
Which explains how to flash using heimdall. After a successful flash, my phone didn't get farther than the boot animation. I booted into stock recovery with vol up-home-power to factory reset, but noticed a dead droid and red writting. Rather than continue, I wanted to fix this, so I followed the tutorial again, but this time checked repartition under the pit path, and hoped for the best. The phone stalled at the boot anim again, but this time in recovery, all was good.
I did a data wipe / factory reset, cache wipe etc, but nothing. So I stuck the stock rom zip onto the micro sd and installed it from recovery, factory reset, and rebooted. (which is odd, having to install the rom from recovery - because doesn't that kinda defeat the point of using the same image on heimdall in the first place?!?)
The phone booted! So after all that, (Having data/factory reset, wiped the cache, (wiped the dalvik cache when i had CWM before and formatted all I could in mounts and storage) flashed the stock ROM AND repartitioned the phone) i thought that would eliminate any software issues. I thought the camera would work.
Nope.
As usual, the front camera worked, but the back, now, after a pause would give the samsung error:
Code:
unknown error by errorcallback
Now, after googling this (Cyanogenmod gave a different error with no related answers on google) and being annoyed at my time lost, I took the tongue and cheek advice from some random forum commenter, to tap the camera hard.
It worked.
Apparently, the entire time the camera was suffering from a hardware issue. Something about a 'sticky shutter'. Anyways, i'm going to leave the stock ROM and take it into a shop to get it fixed. Just leaving this trail of breadcrumbs in the hope it helps someone else.
Perhaps this could be marked as 'solved'.
Same problem
FINALLY; first time I see the problem I have (I'm not feeling good about you having the problem, btw). I've had this problem for a lot of time and I haven't had found it elsewhere.
I have the same issue, but without the error that says "unknown error by errorcallback". Mine just says "Unfortunately, Camera has stopped working". I didn't really understand if it had appeared to you after you did all that, or if it was from the beginning... anyways, just "tapping hard" the camera will make it work? And, did it fix it permanently?
Sorry for any typo.
Edit: I've "tapped" the camera really hard, and no signs of anything. Any advice? (I've done practically everything you have done but flashing the stock rom)
JCNouel said:
FINALLY; first time I see the problem I have (I'm not feeling good about you having the problem, btw). I've had this problem for a lot of time and I haven't had found it elsewhere.
I have the same issue, but without the error that says "unknown error by errorcallback". Mine just says "Unfortunately, Camera has stopped working". I didn't really understand if it had appeared to you after you did all that, or if it was from the beginning... anyways, just "tapping hard" the camera will make it work? And, did it fix it permanently?
Sorry for any typo.
Edit: I've "tapped" the camera really hard, and no signs of anything. Any advice? (I've done practically everything you have done but flashing the stock rom)
Click to expand...
Click to collapse
Try flashing stock rom and see if this fixes your problem.
gsstudios said:
Try flashing stock rom and see if this fixes your problem.
Click to expand...
Click to collapse
It fixed it, but then I flashed back the AICP ROM, which is KK, and it malfunctioned again. I'm going to try with a JB Custom ROM.
Update: I flashed a JB Custom Rom (Fusion Rom) and it's working good so far.
So heres my problem...a couple days ago I was deleting some system apps from my S4 to make the phone faster and I was running Eclipse 4.02 at the time...Okay well after I got done deleting the apps I rebooted my phone, everything worked fine for a couple of minutes but then I got a pop up that said "The Process com.android.phone has stopped" and I would hit okay but this diables the data and I have to restart my phone to get data working again...I've tried deleting the Rom from my SD card and redownloading it, I've tried factory reset, and I've also tried flashing a stock md5.tar file in ODIN but it fails at the very end...It will boot but the Wi-Fi doesn't work due to me having to flash gogolies Wi-Fi fix in order to have working Wi-Fi on Eclpise and I still get the "com.android.phone has stopped" issue...the only work around I've found so far is flashing the Google Play Edition Rom this fixes the "com.android.phone" issue but sometimes I won't receive SMS or I will gert them in halves and won't get the others until hours later. I made sure to read the instructions carefully and I am aware of the GPE Rom having issues anyway like MPT connection and Tethering not working but is it possible that somehow I corrupted /system or /system/priv-app or even /system/app? If so is it possible to fix this problem I called Samsung and they said they couldn't do anything about it...but still I would love to use Eclipse again but I can't due to the annoying com.android.phone has stopped issue...If anyone can help or upload the original /system, /system/priv-app, and /system/app that would be great I would just need to know how to install them back because I have no idea...Eclipse is a 4.4.2 Rom and GPE is a 4.4.4 Rom and I'm running baseband NC5 and using stock kernel and I am currently runnin g the GPE Rom to avoid the com.android.phone problem but I don't always receive SMS...any help would be greatly wonderful! Thannks!
Killoma572 said:
So heres my problem...a couple days ago I was deleting some system apps from my S4 to make the phone faster and I was running Eclipse 4.02 at the time...Okay well after I got done deleting the apps I rebooted my phone, everything worked fine for a couple of minutes but then I got a pop up that said "The Process com.android.phone has stopped" and I would hit okay but this diables the data and I have to restart my phone to get data working again...I've tried deleting the Rom from my SD card and redownloading it, I've tried factory reset, and I've also tried flashing a stock md5.tar file in ODIN but it fails at the very end...It will boot but the Wi-Fi doesn't work due to me having to flash gogolies Wi-Fi fix in order to have working Wi-Fi on Eclpise and I still get the "com.android.phone has stopped" issue...the only work around I've found so far is flashing the Google Play Edition Rom this fixes the "com.android.phone" issue but sometimes I won't receive SMS or I will gert them in halves and won't get the others until hours later. I made sure to read the instructions carefully and I am aware of the GPE Rom having issues anyway like MPT connection and Tethering not working but is it possible that somehow I corrupted /system or /system/priv-app or even /system/app? If so is it possible to fix this problem I called Samsung and they said they couldn't do anything about it...but still I would love to use Eclipse again but I can't due to the annoying com.android.phone has stopped issue...If anyone can help or upload the original /system, /system/priv-app, and /system/app that would be great I would just need to know how to install them back because I have no idea...Eclipse is a 4.4.2 Rom and GPE is a 4.4.4 Rom and I'm running baseband NC5 and using stock kernel and I am currently runnin g the GPE Rom to avoid the com.android.phone problem but I don't always receive SMS...any help would be greatly wonderful! Thannks!
Click to expand...
Click to collapse
Sent from my SM-N910V using XDA Free mobile app
I'm really new to XDA but just an update...I fixed it by flashing the NC5.tar again and it actually passed finally I then updated to NK1 so if anyone actually has this problem just repeatedly flash the NC5.tar until it passes I also had to flash the .pit file to return it to factory stock and before I did all this I went into stock recovery (Not Safestrap) and cleared data and cache and then flashed everything through ODIN and it passed and haven't had the problem since
Sent from my SCH-I545 using XDA Free mobile app
So I have got this Samsung Galaxy Tab 2 3G 10.1" that has been lying in a cupboard for a around a year, mainly because I've been busy Now there's a family member of mine who would really need a tablet so I thought this one would be perfect for her!
From thinking I went on to doing and started with getting rid of the stock software and installing some nice custom ROM.
As I found out i couldn't use USB (probably busted data-cable), I rooted the tab using KingRoot and went on installing CWM recovery. Afterwards long story short: I've tried both CWM and TWRP, different ROM and android versions (Lineage, CM, Slim etc.) and different GApps packages from different developers but the problem still seems to come up :crying:
The problem itself is that when I've installed any of the above mentioned ROMs, all the GApps seem to not have been installed correctly (even though the installation process in recovery went smoothly) and basically none of them works (notifications saying that any GApp has stopped keep on coming up and I can't find any Google app in the menu except something things like "com.google.android..." or "com.android.vending...") otherwise everything seems perfectly fine.
Maybe there are others here experiencing the same issue or there's someone who knows how to fix this here, any help will be very appreciated :good:
Hello,
First, have you checked that the ROM you flashed was fully compatible with your device? Yes, this is obvious, but I have to ask.
Second, I'm not a ROM flashing via custom recovery fan... The best way to efficiently flash a ROM in my opinion is Odin-Download mode but whatever (your USB port is screwed, so pfu.)
Redownloading apps doesn't work for you? (updating the apk may fix that!)
Atronid said:
Hello,
First, have you checked that the ROM you flashed was fully compatible with your device? Yes, this is obvious, but I have to ask.
Second, I'm not a ROM flashing via custom recovery fan... The best way to efficiently flash a ROM in my opinion is Odin-Download mode but whatever (your USB port is screwed, so pfu.)
Redownloading apps doesn't work for you? (updating the apk may fix that!)
Click to expand...
Click to collapse
Thanks for your reply!
Yes, I do have used ROMs compatible with my device as they've all are made for espresso3g (which is my device).
I know it's not really the best way but I'll keep on trying with custom recovery for some more time and then perhaps try buying a new cable, and see if that works.
Tried installing Google Play Store from APK both on a clean ROM without GApps and with, but it still doesn't run and keeps on saying that either Google Play Store or "com.google.process.gapps" has stopped.
Alright...
I'm out of idea x/
lordquestionmark said:
The problem itself is that when I've installed any of the above mentioned ROMs, all the GApps seem to not have been installed correctly (even though the installation process in recovery went smoothly) and basically none of them works (notifications saying that any GApp has stopped keep on coming up and I can't find any Google app in the menu except something things like "com.google.android..." or "com.android.vending...") otherwise everything seems perfectly fine.
Maybe there are others here experiencing the same issue or there's someone who knows how to fix this here, any help will be very appreciated :good:
Click to expand...
Click to collapse
Hello...!
You could try the following....
1. make absolutely sure you are using the correct version of gapps for the custom rom you are currently using. If your custom rom is on android 6, you need gapps for android 6 for example.
2. after flashing gapps wipe cache/dalvik and make a factory reset BEFORE exiting twrp. You will lose personal data but since you are preparing to give the device to somebody else that should not be much of a concern.
Let me know if it helps, if it does not, I might be able to try and provide additional suggestions.
Good luck!
r&xp said:
Hello...!
You could try the following....
1. make absolutely sure you are using the correct version of gapps for the custom rom you are currently using. If your custom rom is on android 6, you need gapps for android 6 for example.
2. after flashing gapps wipe cache/dalvik and make a factory reset BEFORE exiting twrp. You will lose personal data but since you are preparing to give the device to somebody else that should not be much of a concern.
Let me know if it helps, if it does not, I might be able to try and provide additional suggestions.
Good luck!
Click to expand...
Click to collapse
Hi and thanks for your reply!
1. The ROMs I've been trying to install are all android 6.0.1 and I've been trying with different OpenGApps packages for the 6.0 version which should work (except CM 12 which is android 5.1 with which I've tried OpenGApps and A-Gapps for Android 5.1).
2. Tried that with 3 different ROMs today and the results are following: Slimrom gets stuck in setupwizard which doesn't start, CM 12 starts but the same error as first seems to appear (I get notifications about GApps which stop working) and Lineage bootloops the lineage start screen.
lordquestionmark said:
Hi and thanks for your reply!
1. The ROMs I've been trying to install are all android 6.0.1 and I've been trying with different OpenGApps packages for the 6.0 version which should work (except CM 12 which is android 5.1 with which I've tried OpenGApps and A-Gapps for Android 5.1).
2. Tried that with 3 different ROMs today and the results are following: Slimrom gets stuck in setupwizard which doesn't start, CM 12 starts but the same error as first to appear (I get notifications about GApps which stop working) and Lineage bootloops the lineage start screen.
Click to expand...
Click to collapse
Ok...
This is what I would do if it was my device and I was facing what you are describing. It might take some time and a little patience to do everything described here, but it might also work.
1. Usin Odin, flash latest available official rom for the device. Let it boot and complete setup.
2. Use odin and use CF autoroot to root. Again boot and complete setup.
3. Flash Twrp. Enter Twrp and flash latest flashable supersu.zip. At this time I believe is version 2.82. Again boot and let it reach your welcome screen.
4. Enter Twrp. Enter advanced wipe. Wipe everything except external SD and usb at least 3 times. Do not exit twrp.
5. Install you rom. Do not exit Twrp.
6. After installing your rom, Twrp will ask you if you want to wipe cache/dalvik. "Yes" but DO NOT reboot.
7. Install correct version of gapps for your custom rom (correct both android version and architecture version). Again twrp will ask you to wipe cache/dalvik. "Yes" and this time reboot.
See what happens. If it gets stuck, try entering twrp again and do a factory reset only, only once and reboot again.
If that fails again... I will at a loss here myself too...
I did a quick search here on xda on P5100, I am providing some links that you can take a look at. You probably already searched yourself but you never know...
https://forum.xda-developers.com/ga...-2-unified/rom-cyanogenmod-13-cm13-0-t3303798
https://forum.xda-developers.com/galaxy-tab-2/10-inch-development/rom-blissmallow-t3312320
https://forum.xda-developers.com/showthread.php?t=1686514
https://forum.xda-developers.com/showthread.php?t=2581782
https://forum.xda-developers.com/galaxy-tab-2/10-inch-development/rom-candy-5-v2-5-5-t3136904
If nothing else helps, perhaps the best way to go around this would be to find a custom rom with at least some google apps pre-installed, in order to save you the trouble you are currently facing.
lordquestionmark said:
So I have got this Samsung Galaxy Tab 2 3G 10.1" that has been lying in a cupboard for a around a year, mainly because I've been busy Now there's a family member of mine who would really need a tablet so I thought this one would be perfect for her!
From thinking I went on to doing and started with getting rid of the stock software and installing some nice custom ROM.
As I found out i couldn't use USB (probably busted data-cable), I rooted the tab using KingRoot and went on installing CWM recovery. Afterwards long story short: I've tried both CWM and TWRP, different ROM and android versions (Lineage, CM, Slim etc.) and different GApps packages from different developers but the problem still seems to come up :crying:
The problem itself is that when I've installed any of the above mentioned ROMs, all the GApps seem to not have been installed correctly (even though the installation process in recovery went smoothly) and basically none of them works (notifications saying that any GApp has stopped keep on coming up and I can't find any Google app in the menu except something things like "com.google.android..." or "com.android.vending...") otherwise everything seems perfectly fine.
Maybe there are others here experiencing the same issue or there's someone who knows how to fix this here, any help will be very appreciated :good:
Click to expand...
Click to collapse
did you find a solution
lordquestionmark said:
So I have got this Samsung Galaxy Tab 2 3G 10.1" that has been lying in a cupboard for a around a year, mainly because I've been busy Now there's a family member of mine who would really need a tablet so I thought this one would be perfect for her!
From thinking I went on to doing and started with getting rid of the stock software and installing some nice custom ROM.
As I found out i couldn't use USB (probably busted data-cable), I rooted the tab using KingRoot and went on installing CWM recovery. Afterwards long story short: I've tried both CWM and TWRP, different ROM and android versions (Lineage, CM, Slim etc.) and different GApps packages from different developers but the problem still seems to come up :crying:
The problem itself is that when I've installed any of the above mentioned ROMs, all the GApps seem to not have been installed correctly (even though the installation process in recovery went smoothly) and basically none of them works (notifications saying that any GApp has stopped keep on coming up and I can't find any Google app in the menu except something things like "com.google.android..." or "com.android.vending...") otherwise everything seems perfectly fine.
Maybe there are others here experiencing the same issue or there's someone who knows how to fix this here, any help will be very appreciated :good:
Click to expand...
Click to collapse
Hey, just try uninstalling Google play services and install them again. I faced the same issue and now it's all working on my Samsung Galaxy Core 2