Is it possible to connect an unrooted S3 to a TV via MHL and also plug in a PS3 gamepad via a USB OTG cable at the same time?
Maybe there's a cable on the market which allows this?
There is docking station made by Samsung, EDD-S20EWEGSTD that allows HDMI and OTG and charging simultaneously
Topic is here:
http://forum.xda-developers.com/showthread.php?t=1966281
Thanks, that looks pretty smart. It is pricey though!
Related
I just found a MHL cable for the SGS2 on Amazon with Micro-USB to HDMI.
I have a Samsung HDTV bought about a year ago. Now i know that MHL means you can charge as well as view the phone stuff on the screen but MHL TVs have not released yet (i think, and even if they have i wont be getting one anytime soon).
So my question is can i still see the TV out if i use the MHL cable on my older TV? I know it definitely wont charge.
Anyone?? :S
yes you can.
all you need is the adapter from MHL (micro-USB) to HDMI, connect the HDMI to the TV and you are good to go.
the advantage of the original samsung adapter is the ability to connect a power cable to the adaptor and charge the phone while it transmits the picture to the TV.
hope i helped
Thanks mate
For anyone confused, an MHL cable is a Micro USB to HDMI cable - no ifs, no buts, this will transmit HDMI from a compatible MHL port. Nothing else needed (except I believe it must also be connected to power)
Your micro USB port on the bottom of your SGS2 is an MHL/USB port, and will therefore work.
Important to note is that not all micro USB ports are also MHL ports, therefore will not necessarily work on some other micro USB port on a different phone.
If you connect the MHL cable to the device and the OTG cable to the MHL cable the device can't detect the OTG cable.
How can I make this work? I've seen videos in youtube that they connect their device to the TV at the same they have USB bluetooth mouse and keyboard connected.
Anyone tried using MHL cable and OTG cable at the same time?
Sent from xda premium powered by GT-I9300
anyone?
Sent from xda premium powered by GT-I9300
According to some of wikipedia entries it should be possible to use mhl and usb otg at the same time with a 11-pin mhl-hdmi adapter.
Wikipedia said:
11-pin MHL-USB Connector
The Samsung Galaxy S III uses a connector that is similar to the original 5-pin MHL-USB connector, but it uses 11-pins in order to achieve a few functional improvements over the 5-pin design.
It supports the use of USB and MHL simultaneously (note that the new Samsung 11-pin MHL-HDMI adapter also has a USB-OTG port).
Samsung’s Galaxy S III can power the MHL-HDMI adapter. Although this can theoretically also be done with the standard 5-pin micro-USB connector, the Galaxy S III's 11-pin connector is believed to be the first smartphone that supports this functionality.
Click to expand...
Click to collapse
Here you go.
So, it should work. But I couldnt make it work at the moment
I also got one of these 11-pin connectors and like it seems only the S3 has these adapters, so why the **** doesnt it work?? :/
I already asked sammy on facebook, just wondering what they will answer^^
Hopefully we will have some pos. results, dude.
cheers
bordikun said:
If you connect the MHL cable to the device and the OTG cable to the MHL cable the device can't detect the OTG cable.
How can I make this work? I've seen videos in youtube that they connect their device to the TV at the same they have USB bluetooth mouse and keyboard connected.
Anyone tried using MHL cable and OTG cable at the same time?
Sent from xda premium powered by GT-I9300
Click to expand...
Click to collapse
How would that work since the micro USB connection on the mhl cable is for power / charger?
In those YouTube videos is it possible that they have the mhl cable connected to the TV and power source, and the keyboard and mouse connected wirelessly via Bluetooth?
Confused because you said USB Bluetooth mouse and keyboard. From what I know they aren't USB.
Sent from my GT-I9300 using xda premium
Samsung should eventually release a dock to use both so unless someone figures it out first you'll just have to wait, because if it just took an 11 pin USB cable someone would have got it working already and we'd know about it, so I reckon it might have some extra circuitry to make it recognised by the phone.
Guys, as I already posted, the connector has 11 pins, so it should be possible to use OTG and MHL features at the same time. thats the only reason sammy brought out this connector and also cause of incompability with the 5-pin connector.
So they should bring the f*ck out somethin for the phone that activates this feature.
And a big problem I have with my mhl-connector is that I cant configure the output
on my 2 TVs at home I get 1080i, (both only 1080i capable), but the picture is kinda oversized so I cant see 100% percent of the picture, only 90% or smt like this.
But the funny part is, that I get on my 1680x1050p PC monitor only 576p screen, what actually sucks So it would be awesome if I could choose the resolution I want to have. But I guess its a thing of the connector (maybe it choose the resolutions iself).
cheers
so the one in the videos using keyboard and mouse are bluetooth thru phone?
Sent from xda premium powered by GT-I9300
I am SO HARD waiting for THAT "DOCK" hopefully will came out any day soon.
They should do iut fast. I'm waiting so hard for everything get connected with my Phone. It will be awsome if I don't need my Pc anymore.
To use the MHL cable you must have power connected to the adapter.
Sent from my GT-I9300 using Tapatalk 2
bordikun said:
If you connect the MHL cable to the device and the OTG cable to the MHL cable the device can't detect the OTG cable.
How can I make this work? I've seen videos in youtube that they connect their device to the TV at the same they have USB bluetooth mouse and keyboard connected.
Anyone tried using MHL cable and OTG cable at the same time?
Sent from xda premium powered by GT-I9300
Click to expand...
Click to collapse
That's damn funny because I have wanted to know whether that would work as well, lol.
Did seriously consider trying but as I was on holiday if they broke, I wouldn't be able to get replacement so didn't try it.
In theory I would think it could work, but only if you could somehow wire in power to the hdmi adapter as it appears to need that to run the hdmi aswell as provide power to the phone, at least enough that once the usb adapter tries to demand power to run it isn't enough for the phone to output.
As to whether this is just a a stupid guess and assumption of how the devices and being a noob, I don't know.
If you can get a micro female to male adapter with a usb splitter for power then technically I can't see why it wouldn't work if the limitations are physical as oppose to software based (whole other issue I have no clue about).
EDIT: Wow, when I started that post no one had replied, err, seems a little redundant now, lol. My bad. Also, this 5 minute wait to point this out, have seemed really long...
guess we'll have to wait for that dock.
Sent from xda premium powered by GT-I9300
dear experts,
Im going to buy xperia z tab but I have a few questions to you.
Can I buy some adapters which allow me to connect in the some time, usb HDD, wifi mouse (via usb I use this mouse on windows currently ) so need 2 usb slot, HDMI (so I can transfer display on TV), and need another plug for a charger. Is it any chance I an buy some adapters, plug etc. where I can connect all this device and tablet will still be manage to run all of this optcion at the some time?
please help
x7nofate said:
dear experts, Im going to buy xperia z tab but I have a few questions to you. Can I buy some adapters which allow me to connect in the some time, usb HDD, wifi mouse (via usb I use this mouse on windows currently ) so need 2 usb slot, HDMI (so I can transfer display on TV), and need another plug for a charger. Is it any chance I an buy some adapters, plug etc. where I can connect all this device and tablet will still be manage to run all of this optcion at the some time? please help
Click to expand...
Click to collapse
You are going to need a USB 1.x/2.0 Female Type A to Male Type Micro-B adapter cable.
The XTZ's USB port does not supply enough amperes to power most portable USB HHDs, so when selecting an HDD, make sure it requires very low amperes.
The WiFi mouse's Windows-based adapter will not work with the XTZ unless the mouse's manufacturer can provide Android drivers. You need to check with the manufacturer to see if they have any, but I highly doubt they have Android drivers. You will have better luck using a Bluetooth or USB mouse.
You can use a non-powered or powered USB hub to gain more USB ports. A powered USB hub would be a better choice because it would eliminate the problem of powering a USB HDD. Most powered USB hubs are powered by AC adapters, but you can find some that are battery powered.
There are several discussions in this forum about USB MHL to HDMI adapters. Search the forum to find out which adapters work with the XTZ.
You cannot charge a device using a charger through a USB hub. You will need a powered USB hub specifically designed for charging devices.
Right but the question is does the Xperia z tab can be charging the some time when is connect to tv via hdmi?
sent from Samsung Galaxy S4 Active
x7nofate said:
Right but the question is does the Xperia z tab can be charging the some time when is connect to tv via hdmi?
Click to expand...
Click to collapse
Try using a Micro USB Host OTG Y-Cable with Micro USB Power for Sony Phones & Tablets from Valarm, which they say has been tested with the XTZ SGP312.
Hi,
Has anyone managed to successfully find a solution to give an hdmi out display from the note pro 12.2, at the same time as a usb port via otg cable.
What I essentially want to do is to have the note pro at my desk connected via hdmi to a monitor, and still be able to use usb devices such as pen drives etc. Is there any kind of cable combination that will allow for this? I've not been able to find anything.
Thanks
Duncan
I have these:
Usb 3.0 Hub:
http://es.aliexpress.com/store/prod...k-Desktop-4-Port-USB3/1229374_2047737882.html
Usb OTG (with connection for external charger, a must have if you're gonna power devices via USB)
http://es.aliexpress.com/item/CY-Mi...th-USB-Power-for-Galaxy-Note3/1992861830.html
USB A to microUSB adapter, this one is for the HDMI cable:
http://es.aliexpress.com/item/Free-...PE-Male-TO-Micro-USB-5P-Female/882304680.html
You should try all-share-cast or screen cast(via miracast/chromecast) for video and audio. That would do everything easier.
I have a freeview TV adapter plugged into my note 3. Problem is I can't charge it so I have to stop watching TV and wait until its charged. Can I get anything like a micro USB hub. I've seen a few but they are only regular USB ports and not USB micro which I need for my devices. Thanks in advance.
I have MHL to HDMI adapter which hooks up to TV and to a phone charger (other side goes to phone) so it is possible, but I can't say if usb hub would work, since I have not test it.
You can connect a regular USB hub to your micro usb to usb OTG adapter. I tried connecting both a mouse and a keyboard to the hub and it works fine
USB hub won't allow you to charge the device while they are connected. you can either use MHL to HDMI cable as Pete4k advice and enjoy MHL 2.0 while charging or buy one of those USB OTG adapter reader but where you can connect several peripherals and charge at the same time.