Hello all,
I just got my atrix 4g, but i dont know where to start from.
i checked the settings and i found out following things
Model Number: MB860
Android Version: 2.2.2
Kernel Version: 2.6.32.9
Build Nuber: OLYLA_U4_0.87.23
I want to be upgraded to gingerbread. but i have read that on gingerbread if u try to root the device brick.
Also i have plan to custom ROMs.
should i root now and apply custom ROM or first upgrade via OTA and then root n apply custom ROM.
please help .
cs0526 said:
Hello all,
I just got my atrix 4g, but i dont know where to start from.
i checked the settings and i found out following things
Model Number: MB860
Android Version: 2.2.2
Kernel Version: 2.6.32.9
Build Nuber: OLYLA_U4_0.87.23
I want to be upgraded to gingerbread. but i have read that on gingerbread if u try to root the device brick.
Also i have plan to custom ROMs.
should i root now and apply custom ROM or first upgrade via OTA and then root n apply custom ROM.
please help .
Click to expand...
Click to collapse
The "only way" to hard brick is to do the ota update THEN use rsd to flash an earlier software version. so if you dont OTA you wont hard brick. So unlock your bootloader, install a custom recovery, then flash to your hearts content
here is a very helpful guide: http://forum.xda-developers.com/showthread.php?t=1154600
So I got my Razr two days ago and rooted it right off the bat, but now I found that the GPS in it does not work and am returning it tomorrow for a replacement. Sadly, i haven't been around this device enough so I don't know how to unroot it...
I have RSD Lite, and I just downloaded the file:
CDMA DROID RAZR
Fastboot
Branding: Verizon Wireless
Market Segment: VRZ USA
Version: 6.11.744
Android Version: 2.3.5
DHD: 11 TA-3
ROM Type: Service?
Radio Version: CDMA_03.1C.76 LTE_06.35.08
Bootloader Version: N/A
Webtop version: N/A
: from the link in the Moto Tools (For Noobs) thread... Is that the correct file to flash? I have a decent amount of experience with RSD from my time with my Photon, but I just want to make sure that is the correct file.
schollianmj said:
So I got my Razr two days ago and rooted it right off the bat, but now I found that the GPS in it does not work and am returning it tomorrow for a replacement. Sadly, i haven't been around this device enough so I don't know how to unroot it...
I have RSD Lite, and I just downloaded the file:
CDMA DROID RAZR
Fastboot
Branding: Verizon Wireless
Market Segment: VRZ USA
Version: 6.11.744
Android Version: 2.3.5
DHD: 11 TA-3
ROM Type: Service?
Radio Version: CDMA_03.1C.76 LTE_06.35.08
Bootloader Version: N/A
Webtop version: N/A
: from the link in the Moto Tools (For Noobs) thread... Is that the correct file to flash? I have a decent amount of experience with RSD from my time with my Photon, but I just want to make sure that is the correct file.
Click to expand...
Click to collapse
.744 is an old OTA but you can fastboot back to that, then just OTA up to .181 before you send it back.
Sent from my DROID SPYDER using Tapatalk 2
So that is the correct file then. Cool.
Sent from my DROID RAZR using xda premium
Download supersu from the market.
It has an option that will remove root completely from your phone.
FYI
It can also hide root as well as provide you with a whole lot of other cool root features.
Quite possible the easiest way to remove root that I know of. I tried it and it works.
I need a little help here gents,
Basically I want to update my phone as I am stuck on 2.5.5 and want to be able to download ota updates and eventually ics. Here's the catch, I'm unfortunately on the infamous NonEFIGSRetail system version.
From my understanding I have to flash a different retail system version to allow updates and the like to come through.
My questions are...
1.
Which system version should I flash to?
2.
How would I go about doing this? (before my razr I owned a dhd and they seemed a hell of a lot simpler to muck around with)
3.
Lastly if I were to flash a new system version, how would I create a backup of my NonEFIGSRetail version just in case things went tits up?
Cheers
Jack
My full info...
System Version: 651.73.30.xt910.NonEFIGSRetail.en.EU
Baseband Version: U_03.1C.85P
Build Number: 6.5.1-73_SPU-11-M1-2
Flash this one:
Branding: RETAIL en.EU
Market Segment: EuropeAustraliaEMEA
Version: 651.73.30
Android Version: 2.3.5
SPU: 11 M1-2
ROM Type: Service
Radio Version: U_03.1C.85P
Bootloader Version: 0A.67 (contained but not being flashed)
Webtop version: WT-2.0.0-113
Download: http://sbf.droid-developers.org/umts_spyder/SPDREM_U_01.6.5.1-73_SPU-11-M1-2_SIGNEuropeAustraliaEMEA_USASPDRRTGB_HWp2b_Service1FF_fastboot.xml.zip
Taken from the Eternity project thread.
Ignore the OTAs to be sure to be on a stock rom, as some of the roms are leaks etc.
I flashed this:
Branding: RETAIL en.EU
Market Segment: EuropeAustraliaEMEA
Version: 651.167.20
Android Version: 2.3.5
SPU: 15 M2
ROM Type: Service
Radio Version: U_03.1C.91P
Bootloader Version: 0A.6C (contained but not being flashed)
Webtop version: WT-2.0.0-139
@jackmanzan please use the search function as the nonefi had been solved here many times before...
I apologies if this has been covered before but from what I had read there wasn't a definitive answer.
Cheers for the help guys those two system versions look good.
Now can anybody answer question 2/3?
Cheers
Jack
2. http://forum.xda-developers.com/showthread.php?p=23453478
3. If you're rooted, you can make an back up of your current Rom with CWM. But there's no need for.
Just charge your Battery till 100% before you flash with RSD.
Edit to 1: Here you got an actually Fastboot (2.3.6 / Baseband 91)
http://sbf.droid-developers.org/umt...USASPDRRTGB_HWp2b_Service1FF_fastboot.xml.zip
After you flashed this, you'll get an 15mb Update via MotoCast Software. So you'll be sure, that things're working right now :thumbup:
Gesendet von meinem XT910 mit Tapatalk 2
Hello.
To cut a long story short: I used to have my RAZR XT910 (with deleted and lost CID) running on a Chinese kernel and a modified Chinese ROM that was working like a charm. Unfortunately I messed things up with BMM (my fault!) and to un-brick it fastly I used a method that fixed the problem but that got me on
ROM: 982.124.14.XT910.Retail.en.EU
Kernel: 3.0.8-g7198280 [email protected] #1 SMP PREEMPT
As explained it appears that:
"With that unbrick method, you have flashed EMEA 4.1.2 OTA which flashes cdt.bin secure version 7. Once the cdt.bin is upgraded you will not be able to flash partitions signed with lower secure version. In your case, china system,boot,recovery have version 5 but your device is flashed to version 7. There is no known way to bypass it. You are stuck with EMEA 4.1.2 custom roms or CM variants, sorry."
Isn't there any "hard-core" method to work around this? No leak or whatever?
Thanks a lot!
Q&A for RAZR XT910 Firmwares SuperThread (Jelly Bean)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for RAZR XT910 Firmwares SuperThread (Jelly Bean). If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Droid Razr xt910s Korean STK version update firmware
I want any official rom of my razr xt910s korean stk
Thanks in advance
Pzyduck said:
FIRMWARE TEAM proudly presents "RAZR XT910 firmwares Superthread"!
!!!USE AT YOUR OWN RISK!!!
ALL FIRMWARES ARE UNLOCKED. FLASHING A FIRMWARE WILL NOT UNLOCK YOUR PHONE!!!
!ALL FILES ARE OEM MOTOROLA!
RAZR XT910 - LATAM
Branding: Claro Puerto Rico
Version:9.8.2O-124_SPUL-17 Service
Android Version:4.1.2
Bootloader Version: N/A
Requires RSD Lite 6.0
DOWNLOAD
Branding: TIM Brazil
Version:9.8.2O-124_SPUL-17 Service
Android Version:4.1.2
Bootloader Version: N/A
Requires RSD Lite 6.0
DOWNLOAD
Branding: Oi Brazil
Version:9.8.2O-124_SPUL-17 Service
Android Version:4.1.2
Bootloader Version: N/A
Requires RSD Lite 6.0
DOWNLOAD
Branding: Retail Brazil
Version:9.8.2O-124_SPUL-17 Service
Android Version:4.1.2
Bootloader Version: N/A
Requires RSD Lite 6.0
DOWNLOAD
Branding: Rogers Canada
Version:9.8.2O-124_SPUL-18 FULL
Android Version:4.1.2
Bootloader Version: N/A
Requires RSD Lite 6.0
DOWNLOAD
Branding:Fido Canada
Version:9.8.2O-124_SPUL-18 FULL
Android Version:4.1.2
Bootloader Version: N/A
Requires RSD Lite 6.0
DOWNLOAD
RAZR XT910 - Europe
Branding: T-Mobile Germany
Version: 9.8.2O-124_SPUEM-14 FULL
Android Version: 4.1.2
Bootloader Version: N/A
Requires RSD Lite 6.0
DOWNLOAD
Branding: Vodafone Germany
Version: 9.8.2O-124_SPUEM-14 FULL
Android Version: 4.1.2
Bootloader Version: N/A
Requires RSD Lite 6.0
DOWNLOAD
Branding: O2 Germany
Version: 9.8.2O-124_SPUEM-14 FULL
Android Version: 4.1.2
Bootloader Version: N/A
Requires RSD Lite 6.0
DOWNLOAD
Branding: Vodafone France
Version: 9.8.2O-124_SPUEM-14 FULL
Android Version: 4.1.2
Bootloader Version: N/A
Requires RSD Lite 6.0
DOWNLOAD
Branding: Retail France
Version: 9.8.2O-124_SPUEM-14 FULL
Android Version: 4.1.2
Bootloader Version: N/A
Requires RSD Lite 6.0
DOWNLOAD
Branding: O2 British
Version: 9.8.2O-124_SPUEM-14 Service
Android Version: 4.1.2
Bootloader Version: N/A
Requires RSD Lite 6.0
DOWNLOAD
Branding: Retail British
Version: 9.8.2O-124_SPUEM-14 FULL
Android Version: 4.1.2
Bootloader Version: N/A
Requires RSD Lite 6.0
DOWNLOAD
How to request for a firmware:
Submit the following files (using adb pull):
/system/default.prop
/system/build.prop
MSU.txt of Motorola Software Update (You only need the version of Flex)
Configuration > About phone > Screenshot
NOTE: I only MIGHT find that firmware or newer version of it.
Total Credits to "Firmware TEAM"
Click to expand...
Click to collapse
Thanks!
I had a boot loop on my XT910 and i downloaded:
Retail British
Version: 9.8.2O-124_SPUEM-14 FULL
Android Version: 4.1.2
And it worked like a charm!
The Links are dead...
please help me to find the files...
thnx
muscap
cant connect to rsd
i used rsdlite on my old pc more than 10 to make my razr(umts) stock.
but now on my new asus notebook i cant connect to rsd lite.
i installed only motorola device manager 2.4.5 and rsd lite 6.1.6 on my new notebook.
i tried both windows 8 and windows 8.1.
thanks for replies.
cant connect to rsd
i used rsdlite on my old pc more than 10 to make my razr(umts) stock.
but now on my new asus notebook i cant connect to rsd lite.
i installed only motorola device manager 2.4.5 and rsd lite 6.1.6 on my new notebook.
i tried both windows 8 and windows 8.1.
thanks for replies.
Droid Razr XT912 Firmware
Hi,
I'm looking for the stock firmware for my Droid Razr XT912 because I bricked it.
Could I flash a XT910 firmware on to an XT912?
I really need to get my phone working again!
Please Help Me!!!!!
You can not flash the xt910 firmware onto a xt912 device. Have you tried Matt's Utility?
Could you give me a link?
The links I am posting don't seem to be working (after I post the link, it only brings me back to forum, not the link I want...), but I am sure someone else will help...
xt910 jelly bean update
i got few questions regarding the file and install istructions:
this is the file:
Branding: Retail British
Version: 9.8.2O-124_SPUEM-14 FULL
Android Version: 4.1.2
Bootloader Version: N/A
Requires RSD Lite 6.0
and this is the download/file to upgrade with: 9.8.2O-124_SPUEM-14_S7_USASPDRICS01RUKE1007.0R_USASPDRJBRTGB_P011_b57374ab5a_p2b_S1FF_fb_CFC.xml
questions is got is:
1. why in this file name there is usa and the ohhh does gb mean great britain... ok i guess thats right then. this will be suited for spain right? since it is europe.
instrucion questions (cause i cant find it my self), i tried already upgrading other way, throw phones recovery with Blur_Version.672.180.41.XT910.Retail.en.EU this file and i get error every time i try it and it doesnt matter if the phone is rooted or not, is it factory set or not i get error and the update stops. tho i already did the logo change with rsd lite so i kinda now how it work on the pc, but question is:
1. when i start the upgrade do i have to do anything with the phone? i mean i just connect it while on and try to update or i should have it off or should i go to the phones settings like i did when i tried/did the other two ways?
another question regarding to ROM can someone advise which one to install and give a link or explain how to do it? and after how to set it up?
imma complete newbie to this, i just figured it out yesterday that i can do these things, something getting your phone not work properly will actually lead you to good things. i had google account issues.
thanks.
ghostmikey said:
i got few questions regarding the file and install istructions:
this is the file:
Branding: Retail British
Version: 9.8.2O-124_SPUEM-14 FULL
Android Version: 4.1.2
Bootloader Version: N/A
Requires RSD Lite 6.0
and this is the download/file to upgrade with: 9.8.2O-124_SPUEM-14_S7_USASPDRICS01RUKE1007.0R_USASPDRJBRTGB_P011_b57374ab5a_p2b_S1FF_fb_CFC.xml
questions is got is:
1. why in this file name there is usa and the ohhh does gb mean great britain... ok i guess thats right then. this will be suited for spain right? since it is europe.
instrucion questions (cause i cant find it my self), i tried already upgrading other way, throw phones recovery with Blur_Version.672.180.41.XT910.Retail.en.EU this file and i get error every time i try it and it doesnt matter if the phone is rooted or not, is it factory set or not i get error and the update stops. tho i already did the logo change with rsd lite so i kinda now how it work on the pc, but question is:
1. when i start the upgrade do i have to do anything with the phone? i mean i just connect it while on and try to update or i should have it off or should i go to the phones settings like i did when i tried/did the other two ways?
another question regarding to ROM can someone advise which one to install and give a link or explain how to do it? and after how to set it up?
imma complete newbie to this, i just figured it out yesterday that i can do these things, something getting your phone not work properly will actually lead you to good things. i had google account issues.
thanks.
Click to expand...
Click to collapse
You'll need Motorola drivers,Rsd lite and sbf file.
http://forum.xda-developers.com/showthread.php?t=3023837
Sent from my Razr XT910
ghostmikey said:
i got few questions regarding the file and install istructions:
this is the file:
Branding: Retail British
Version: 9.8.2O-124_SPUEM-14 FULL
Android Version: 4.1.2
Bootloader Version: N/A
Requires RSD Lite 6.0
and this is the download/file to upgrade with: 9.8.2O-124_SPUEM-14_S7_USASPDRICS01RUKE1007.0R_USASPDRJBRTGB_P011_b57374ab5a_p2b_S1FF_fb_CFC.xml
questions is got is:
1. why in this file name there is usa and the ohhh does gb mean great britain... ok i guess thats right then. this will be suited for spain right? since it is europe.
instrucion questions (cause i cant find it my self), i tried already upgrading other way, throw phones recovery with Blur_Version.672.180.41.XT910.Retail.en.EU this file and i get error every time i try it and it doesnt matter if the phone is rooted or not, is it factory set or not i get error and the update stops. tho i already did the logo change with rsd lite so i kinda now how it work on the pc, but question is:
1. when i start the upgrade do i have to do anything with the phone? i mean i just connect it while on and try to update or i should have it off or should i go to the phones settings like i did when i tried/did the other two ways?
another question regarding to ROM can someone advise which one to install and give a link or explain how to do it? and after how to set it up?
imma complete newbie to this, i just figured it out yesterday that i can do these things, something getting your phone not work properly will actually lead you to good things. i had google account issues.
thanks.
Click to expand...
Click to collapse
What version is on phone now?
xml.zips are full firmware files, and will not install in recovery.
You must use the version that match the phones current region codes.
Sent from my XT907 using Tapatalk
sorry for being rude, but none of these two reply was trying to answer my question.
for the system recovery update i was using this tut:
droidviews.com/update-motorola-razr-gsm-xt910-with-official-android-4-1-2-jelly-bean-leaked-ota-update
because my phones firmware was exactly like there (plus it was the only up to that point that actually had a working link for download with no crap in it, but it didnt work for me, thats where i was getting an error all the time i tried,with root or without, and factory setting didnt do it ether.
i do have the drivers and rsd lite 6. and also i downloaded 9.8.2O-124_SPUEM-14_S7_USASPDRICS01RUKE1007.0R_USASPDRJBRTGB_P011_b57374ab5a_p2b_S1FF_fb_CFC.xml yesterday retail british. so i want to update throw rsd, but i know how to do it in the RSD, but what i should do with my phone? keep it ON or OFF? NEED TO GO TO SYSTEM WHILE DOING THE UPDATE GOES?
WELDER THANKS FOR THAT LINK IT IS AWESOME. IF I DONT GET AN ANSWER HERE I WILL BE DIGGING THERE, FOR ROM I SAW THERE IS TUTS SO VERY COOL THANKS A LOT FOR THE THAT LINK.
ghostmikey said:
sorry for being rude, but none of these two reply was trying to answer my question.
for the system recovery update i was using this tut:
droidviews.com/update-motorola-razr-gsm-xt910-with-official-android-4-1-2-jelly-bean-leaked-ota-update
because my phones firmware was exactly like there (plus it was the only up to that point that actually had a working link for download with no crap in it, but it didnt work for me, thats where i was getting an error all the time i tried,with root or without, and factory setting didnt do it ether.
i do have the drivers and rsd lite 6. and also i downloaded 9.8.2O-124_SPUEM-14_S7_USASPDRICS01RUKE1007.0R_USASPDRJBRTGB_P011_b57374ab5a_p2b_S1FF_fb_CFC.xml yesterday retail british. so i want to update throw rsd, but i know how to do it in the RSD, but what i should do with my phone? keep it ON or OFF? NEED TO GO TO SYSTEM WHILE DOING THE UPDATE GOES?
WELDER THANKS FOR THAT LINK IT IS AWESOME. IF I DONT GET AN ANSWER HERE I WILL BE DIGGING THERE, FOR ROM I SAW THERE IS TUTS SO VERY COOL THANKS A LOT FOR THE THAT LINK.
Click to expand...
Click to collapse
Now I don't want to be rude but I think that you don't know how to use Rsd...
Shut down the phone
Press vol-,vol+ and power button at the same time
With vol- scroll down to Ap fastboot mode
Select it with vol+
Connect the phone to computer (laptop)
Open Rsd
Choose your fastboot file and flash it
DON'T touch the phone until it's finished
So,your phone must be in fastboot mode and when you flash fastboot file with Rsd it isn't an update,it's a clean,whole new rom.
Sent from my Razr XT910
ghostmikey said:
sorry for being rude, but none of these two reply was trying to answer my question.
for the system recovery update i was using this tut:
droidviews.com/update-motorola-razr-gsm-xt910-with-official-android-4-1-2-jelly-bean-leaked-ota-update
because my phones firmware was exactly like there (plus it was the only up to that point that actually had a working link for download with no crap in it, but it didnt work for me, thats where i was getting an error all the time i tried,with root or without, and factory setting didnt do it ether.
i do have the drivers and rsd lite 6. and also i downloaded 9.8.2O-124_SPUEM-14_S7_USASPDRICS01RUKE1007.0R_USASPDRJBRTGB_P011_b57374ab5a_p2b_S1FF_fb_CFC.xml yesterday retail british. so i want to update throw rsd, but i know how to do it in the RSD, but what i should do with my phone? keep it ON or OFF? NEED TO GO TO SYSTEM WHILE DOING THE UPDATE GOES?
WELDER THANKS FOR THAT LINK IT IS AWESOME. IF I DONT GET AN ANSWER HERE I WILL BE DIGGING THERE, FOR ROM I SAW THERE IS TUTS SO VERY COOL THANKS A LOT FOR THE THAT LINK.
Click to expand...
Click to collapse
Update.zips only update, current system had to be to exactly the right system version, that the update was made for, current system must be full stock, no missing stock apps, even then updates sometimes fail, then you must flash with RSD Lite.
Sent from my XT907 using Tapatalk
thanks all worked out fine, my mobile now it 4.1.2 jelly bean. first i couldnt make a call and wifi wasnt working, but restart the mobile did the job and now it working fine. now i will be searching what does the rom do and shouldi intall it. thanks you for help and link, they will come in handy.:good: