I can't seem to find a stable release, yet a lot of youtube videos show people using it?
I've tried the nightly versions and for some reason it just hangs at the samsung load screen.
Anyone know what's happening with it? are we waiting on CM9+ICS instead of CM 7.1 now?
richfreestone said:
I can't seem to find a stable release, yet a lot of youtube videos show people using it?
I've tried the nightly versions and for some reason it just hangs at the samsung load screen.
Anyone know what's happening with it? are we waiting on CM9+ICS instead of CM 7.1 now?
Click to expand...
Click to collapse
I've installed a couple of the nightlies and not had major issues. There were indeed bugs, which made me move on to other ROMs (among other reasons, including the fact that my old HD2 had CM7 and it got a bit old).
As far as my experience goes, the nightlies have been quite stable. As mentioned, there were bugs here and there, and a force close from time to time. But I didn't have the problem you've mentioned with hanging at install.
They did take a while to load the first time, longer than I remember was the case on my HD2. Did you wait long enough? Delvic/cache cleared?
EDIT: I also found a CM9 around New Years, but it wasn't as stable and had charging issues. But I think it's out and the waiting's over, really.
EDIT AGAIN: The other option would be to try out the official ICS release, which can be found at samfirmware.com. That's my plan for the weekend.
like the previous...Sounds like your flashing over existing roms without wiping everything first...From recovery mode after backing up, the best way I find is to wipe data/clear cache and wipe dalvic cache from advanced menu before flashing any roms...that way your starting with a clean slate and will be less conflictions from old to new.
for me CM7.1 not stable
I'm waiting a stable CM9 its promising
If you follow the instructions on how to install it, it's stable for everyone. I'm using it for many many months now, and it's stable.
If you're coming from other ROM's, make sure you do a FULL wipe, and flash the rom TWICE in a row, without rebooting recovery.
And yes, we're waiting for CM9. CM7 is not supported anymore for SGSII.
I cleared the data, the cache, went into advanced and cleared the dalvik cache.
Installed the nightly, which I thought was trange was only 100mb, normally ROM's are like 300mb.
I'll try flashing the ROM twice as TheSaw has said. However, after seeing that CM7 isn't supported, I may think twice, i'm just getting bored of the stock.
Might also be worth noting, i'm using [email protected] #k2-18 kernel.
Also, by the way Sean is here, did you know you've got a USA flag in your mini profile under your username? will the official release be a odin flash? or can I just use a .zip through CWM to flash it? and would I still be able to use the speedmod kernel with ICS?
Always working for me and thousands of others .
Usual story is wrong install .
jje
I managed to get this working, by installing the ROM once, and then installing it again straight after.
I was just wondering, is there a way to move the lock screen lock down to the bottom of the screen, i.e. above the unlock and camera buttons? and is there a way to change the clock?
Hello,
Every once in a while my Samsung Galaxy SII I9100 with Android 4.1.2 hangs up, and after that it goes in the bootloop on power on. And I know that hard reset is a solution to this problem. But it happened to me lately like 4 times and I really HATE losing my data from apps and settings like this. Is there any way to fix it WITHOUT the need to hard reset? I tried the "soft reset" but it didn' t solve the problem. Every time it is like this - the phone hangs up (usually overnight), I turn it off and then on and suddenly it is in a bootloop. I can access the Recovery and Download modes.
Phitherek_ said:
Hello,
Every once in a while my Samsung Galaxy SII I9100 with Android 4.1.2 hangs up, and after that it goes in the bootloop on power on. And I know that hard reset is a solution to this problem. But it happened to me lately like 4 times and I really HATE losing my data from apps and settings like this. Is there any way to fix it WITHOUT the need to hard reset? I tried the "soft reset" but it didn' t solve the problem. Every time it is like this - the phone hangs up (usually overnight), I turn it off and then on and suddenly it is in a bootloop. I can access the Recovery and Download modes.
Click to expand...
Click to collapse
Have you tried to change kernel see if that helps? Philz is stock solid kernel no probs my end.
Had a similar problem with a Dorimanx build late last yr (forget which build exactly), every couple of weeks the same issue as you're having.
My solution ? Make regular nandroid backups (at the very least weekly, more often if you're updating apps/making changes to your setup a lot or if the problem is happening really often), and restore same whenever you have the bootloop problem.
Worked for me until the problem went away with a different build.
Edit - Or you can do what Andrew suggested & try another kernel/different build of the same kernel (If you're going to stick with the same kernel, tell the dev/pull a logcat or whatever & give that to them).
andrewwright said:
Have you tried to change kernel see if that helps? Philz is stock solid kernel no probs my end.
Click to expand...
Click to collapse
Actually I never tried to change the kernel, I am now using Samsung' s original 4.1.2 firmware. Thank you for suggestion.
MistahBungle said:
Had a similar problem with a Dorimanx build late last yr (forget which build exactly), every couple of weeks the same issue as you're having.
My solution ? Make regular nandroid backups (at the very least weekly, more often if you're updating apps/making changes to your setup a lot or if the problem is happening really often), and restore same whenever you have the bootloop problem.
Worked for me until the problem went away with a different build.
Edit - Or you can do what Andrew suggested & try another kernel/different build of the same kernel (If you're going to stick with the same kernel, tell the dev/pull a logcat or whatever & give that to them).
Click to expand...
Click to collapse
Thank you for suggestion, however my device is not rooted (yet?), so I cannot use nandroid.
Flash with philz kernel and it will be I love team work Mb :thumbup:
Running pure stock, your options are basically zero short of doing a factory reset, which may not solve the issue. You could do a clean install of stock via Odin, but if you're going to go down that path you may as well go the whole hog & root the phone (you don't necessarily have to run a custom kernel/rom if you don't want to; plenty of people run rooted stock) and receive the benefits of same (I.E the ability to make nandroid backups - much better than any other option Samsung has ever come up with).
Thank you for redirecting me to PhilZ kernel. However, I do not know which version I have to download for the Polish firmware (XXMS1), could you clarify?
Also, I have found a Siyah kernel in my search, flashed beta4 but it does not work for me, should I try with beta5? And is it a good kernel?
Siyah v6.0b5 will work and philz lsw will work siyah is very good so is philz
I had exactly the same problem this morning.My phone originally had omega v23 (with philz) installed, but it kept running hot all the time, so I flashed stock 4.1.2 xwlsw with mobile odin and everroot. My question now is should I unroot my f/w before flashing philz kernel?
No just flash it will do as its told :thumbup:
andrewwright said:
No just flash it will do as its told :thumbup:
Click to expand...
Click to collapse
thanks. In the meantime I've doing some reading and somewhere in the depth of the philz kernel thread was a post buried, where some recommended to flash the tar file via mop. That's what I've done. It seems to have worked.
But it's running hot again. I had that before with the philz kernel, but that belongs in another thread
Ok but give it 20 mins atleast to settle down. The only kernel other than apollo that keeps my phone cool :thumbup:
andrewwright said:
Ok but give it 20 mins atleast to settle down. The only kernel other than apollo that keeps my phone cool :thumbup:
Click to expand...
Click to collapse
Dumb question, but I find I need to flash apolo, can I just go ahead and flash it in recovery over philz or is there something I need to look out for. Also I've read about scripts for cleaning up busybox and previous kernels? this is all very confusing
Use gs2 kernel wipe script flash script first then flash dif kernel.
this
Ok, I probably accidentaly found a cause of this problem. I had Facebook information on my lock screen and when I tried to refresh it my phone went on bootloop. So probably it is the issue with the information module of the lock screen (or maybe it was just a coincidence, if so, I will let you know). I think everyone with XWLSE firmware should consider disabling this feature. Btw. really thank you guys for PhilZ recovery + root kernel and Online Nandroid Backup suggestions, they are great .
Hi all, I flashed today Paranoid Android 3.99 - 29.08.2013 (I come from Vanilla RootBox) on my Samsung Galaxy SII, and I noticed that except for gapps everytime I flash something else the phone stuck on the bootscreen.
I flashed Dorimanx 9.39 and it worked at first but after a reboot it got stucked, after I kept the stock kernel of the ROM and try to flash PurePerformanceX and it got stucked again.
Procedure before and after flashing ROM and everything else:
1. Nandroid Backup
2. Wipe Data
3. Wipe Cache&Davlik
4. Flash PA 3.99
5. Wipe cache (just for safety )
6. Flash Gapps
(6.1. Flash PurePerformanceX the second time without installing the Dorimanx)
7. Flash GS2KernelWIpe2.09
8. Flash Dorimanx 9.39
I tried also to do point 7&8 before the 6, but it's the same.
Anyone else having this kind of problem?
Cheers!
Moae
Nope, I haven't tried that version of PA yet, it's on my to-flash list but testing something else right now. You mentioned using hawkerpaul's kernel wipe script...
What I would do (and personally follow every flash) is:
Flash ROMNuke script by hawkerpaul
Flash PA
Flash Gapps
Flash dorimanx
No other wipes other than the ROMNuke script. Then, see if it boots (& reboots). If it does, then flash your performance mod. If that causes bootloops, my guess is that the performance mod isn't updated for 4.3 yet. Either find a new performance mod, or tune dorimanx so you don't need one
See how you go.
Sent from a galaxy far, far away
at first I tried without PurePerformanceX, just PA+Gapps+Dorimanx. I actually use to flash the kernel before flashing gapps, 'cause a lot time flashing gapps before the kernel gave me some problem.
to answer to the other question, yes, I used the GS2KernelWipe by hawkerpaul
By the way, there is a guide for a good tuning of Dorimanx kernel?
Ok so have you tried his ROMNuke script? Never had an issue if I flash that before a ROM /kernel /gapps.
Hmm. Depends on what you want it for. I tune mine for battery, but not to the point of any lag. Someone else doesn't care about battery, and just wants s3 speed on a 2 year old phone. See what I mean? In saying that, read the last 5-10 pages of the Dorimanx discussion thread. That'll give you a pretty good idea of what works for performance. Obviously a god step is the 'performance' profile in Stweaks
Sent from a galaxy far, far away
I'm doing backups before trying . Let you know how it will go.
I'm actually looking for a good battery life but avoiding lags , anyway thanks for the tips
it seems working properly now! thx for all
Moae said:
it seems working properly now! thx for all
Click to expand...
Click to collapse
Good to hear! Re: tuning dorimanx, search for (it may even be linked in OP of dev or discussion thread) for a post by droidphile on governors, i/o schedulers etc. That's a great place to start. Wait I just found it, look here http://forum.xda-developers.com/showthread.php?t=1369817. Start reading up there :good:
Hey guys,
I just got a few questions with this,
Will i lose my apps, theme and such when installing only a ROOT?
Also what do you guys prefer as ROOT method goes, Chainfire and Odin?
I've seen a ROOT BAT program a while ago that realy did everything for you, i just can't remember the name at the moment...
With that i would also like to ask what happens if i update my device? Will i still be able to update it when Samsung pushes a new update ?
Would i need a custom flash recovery? I used to have a phone wich i did it on, But as this is more of my expensiver phone i aint looking to realy risk it. and due all my apps info etc, has well over 150 apps.
Thanks everybody
Bump,
Sorry if nagging but i'm kinda in a rush, if anyone could help me a little?
I basicly know how you most likely root and stuff, just wanna be sure about a few things and what program/apk is best to get into the S3 at 4.3 firmware
Dr.Luigi said:
Hey guys,
I just got a few questions with this,
Will i lose my apps, theme and such when installing only a ROOT?
Click to expand...
Click to collapse
You might lose data.
Few things can be saved, because you have an official (so unrooted) device.
Also what do you guys prefer as ROOT method goes, Chainfire and Odin?
Click to expand...
Click to collapse
Odin is needed, Chainfire root is the most famous method.
I've seen a ROOT BAT program a while ago that realy did everything for you, i just can't remember the name at the moment...
Click to expand...
Click to collapse
Personally I did root with an automatized software, called Unlock Flash.
The better one is Framaroot, but I don't know how it works.
With that i would also like to ask what happens if i update my device? Will i still be able to update it when Samsung pushes a new update ?
Click to expand...
Click to collapse
You'll lost Samsung warranty (no more assistance support, excluded mine and use for software problems [emoji6]), update check and the access to some proprietary apps (You shouldn't be able to download/update from Galaxy Apps).
Normally when you root the device, a CWM custom recovery is included, otherwise you can simply flash via Odin the excellent Philz Recovery, so you'll be able to flash a new Samsung-based rom (ARHD, ArchiPort, Omega, Imperium... aborting the limited stock) or try the greatful AOSP roms (CyanogenMod, Omnirom, PacRom, etc.).
Also custom kernels (BOEFFLA, Googy Max, ArchiKernel and some others, I prevent to cite you outdated ones) and mods (everything!).
Would i need a custom flash recovery? I used to have a phone wich i did it on, But as this is more of my expensiver phone i aint looking to realy risk it. and due all my apps info etc, has well over 150 apps.
Thanks everybody
Click to expand...
Click to collapse
Highly recommended, as I said you need this to install a new rom and any other zip file.
For the rest... I haven't understood you.
Can you explain better last things?
Simone98RC said:
You might lose data.
Few things can be saved, because you have an official (so unrooted) device.
Odin is needed, Chainfire root is the most famous method.
Personally I did root with an automatized software, called Unlock Flash.
The better one is Framaroot, but I don't know how it works.
You'll lost Samsung warranty (no more assistance support, excluded mine and use for software problems [emoji6]), update check and the access to some proprietary apps (You shouldn't be able to download/update from Galaxy Apps).
Normally when you root the device, a CWM custom recovery is included, otherwise you can simply flash via Odin the excellent Philz Recovery, so you'll be able to flash a new Samsung-based rom (ARHD, ArchiPort, Omega, Imperium... aborting the limited stock) or try the greatful AOSP roms (CyanogenMod, Omnirom, PacRom, etc.).
Also custom kernels (BOEFFLA, Googy Max, ArchiKernel and some others, I prevent to cite you outdated ones) and mods (everything!).
Highly recommended, as I said you need this to install a new rom and any other zip file.
For the rest... I haven't understood you.
Can you explain better last things?
Click to expand...
Click to collapse
Well i would only be intrested in ROOT if i can keep all of my files, apps, widgets and such,
I would have done a new ROM if i wouldnt have had so many apps, it would take hours if not days to get everything back as it used to be would be a rather pain in the ***.
Thanks for your help!
Been a while when i unlocked my old device and rommed it undervoltaged it etc etc.
Dr.Luigi said:
Well i would only be intrested in ROOT if i can keep all of my files, apps, widgets and such,
I would have done a new ROM if i wouldnt have had so many apps, it would take hours if not days to get everything back as it used to be would be a rather pain in the ***.
Thanks for your help!
Been a while when i unlocked my old device and rommed it undervoltaged it etc etc.
Click to expand...
Click to collapse
My same problem: too many apps to be restored.
With MyBackupsPRO, the only working without root permissions, you can only keep some settings, contacts, SMS and MMS, then all your apps and games... but without any relative data.
Because as I said you're on an unrooted/official system.
I think you are using an external SD for documents and multimedia files, when you run the first start of your custom rom (highly recommend for the updates, instead the limited stock), be sure that the "Restore data from Google" option is checked.
A discrete help for you, better than nothing.
You have to think that when you did root, backups will be complete, via the greatful Titanium Backup or via recovery with Nandroid backup (my words should be useless if you already have experience with an old device).
Good hacking
As Samsung-based roms I suggest you Android Revolution HD 4.3 or ArchiPort to get the new and officially unsupported 4.4 system.
Pro:
-Compatibility with other Samsung devices;
-Much better camera stabilization than AOSP roms.
Con:
-Touchwiz is heavy for RAM memory and CPU performance;
-Many AOSP functions are completely removed or altered.
As AOSP rom I suggest you CyanogenMod 11, the M builds to have a more stable system, the nightlies for daily updates and less (but always enough) stability.
Pro:
-Latest updates daily/monthly available;
-Many features, AOSP and Cyanogen specific;
-Fully configurable, launcher can be completely replaced, at opposite of Samsung-based roms;
-Greater performance than Samsung-based roms.
Con:
-Some little bug;
-Poor compatibility with Samsung devices and proprietary apps.
As custom kernel, no better one than BOEFFLA: obviously OC and UV support, then lots of functions such "Touch to Wake", a great audio engine, zRAM support, a rich choice of governors and schedulers... it's available for Samsung and many AOSP roms.
Simone98RC said:
My same problem: too many apps to be restored.
With MyBackupsPRO, the only working without root permissions, you can only keep some settings, contacts, SMS and MMS, then all your apps and games... but without any relative data.
Because as I said you're on an unrooted/official system.
I think you are using an external SD for documents and multimedia files, when you run the first start of your custom rom (highly recommend for the updates, instead the limited stock), be sure that the "Restore data from Google" option is checked.
A discrete help for you, better than nothing.
You have to think that when you did root, backups will be complete, via the greatful Titanium Backup or via recovery with Nandroid backup (my words should be useless if you already have experience with an old device).
Good hacking
As Samsung-based roms I suggest you Android Revolution HD 4.3 or ArchiPort to get the new and officially unsupported 4.4 system.
Pro:
-Compatibility with other Samsung devices;
-Much better camera stabilization than AOSP roms.
Con:
-Touchwiz is heavy for RAM memory and CPU performance;
-Many AOSP functions are completely removed or altered.
As AOSP rom I suggest you CyanogenMod 11, the M builds to have a more stable system, the nightlies for daily updates and less (but always enough) stability.
Pro:
-Latest updates daily/monthly available;
-Many features, AOSP and Cyanogen specific;
-Fully configurable, launcher can be completely replaced, at opposite of Samsung-based roms;
-Greater performance than Samsung-based roms.
Con:
-Some little bug;
-Poor compatibility with Samsung devices and proprietary apps.
As custom kernel, no better one than BOEFFLA: obviously OC and UV support, then lots of functions such "Touch to Wake", a great audio engine, zRAM support, a rich choice of governors and schedulers... it's available for Samsung and many AOSP roms.
Click to expand...
Click to collapse
Thanks for the great help,
I aint realy sure yet realy,
But isnt there a way you can simple backup almost everything with the PC?
I thought that was faster, then root it and get those back up on the phone with the PC?
Youve made me thinking realy as my phone was getting slower, Samsung OS isnt that great quiet slow indeed,
I might just drop a few games i dont play realy, so i can get my faster phone back as it used to be.
I used to love tweaking my phone realy, till it broke due rain, was a quiet cheap phone 150e or so.
Do you mind giving your SKYPE or Steam? so i could ask you there, Its been 2 years when i did this, some are kinda floating around in my head but i just cant remember it all anymore.
http://forum.xda-developers.com/gal...msung-galaxy-s3-unified-toolkit-v8-0-t1979290
This is what i meant, Its simple and all in 1, just aint sure if its still up to date?
Via ADT Development Tool, you can do the "adb backup" command, but I think it will include the bootloader, so you'll restore the official and unrooted device state.
But I'm not sure, I never used to backup via PC.
Games are almost innocue, except for notification services who consume a bit of resources.
Can you tell me the heavier apps you're using?
According to your words, having too many apps you're not very satisfied about your performance... or I'm wrong?
Simone98RC said:
Via ADT Development Tool, you can do the "adb backup" command, but I think it will include the bootloader, so you'll restore the official and unrooted device state.
But I'm not sure, I never used to backup via PC.
Games are almost innocue, except for notification services who consume a bit of resources.
Can you tell me the heavier apps you're using?
According to your words, having too many apps you're not very satisfied about your performance... or I'm wrong?
Click to expand...
Click to collapse
Ye it used to be quiet a bit faster, Might be Samsung OS i forgot the name of the OS but anyhow, wizard or something,
Oh well, i will just do it i guess and i will see on the road what apps i need, the rest clearly seems that i dont need em if i never use em.
I'm guessing that the best would be Clockwork recovery and the SUroot? together with cyanogen ROM and buffalo.
As apps goes its basicly my home screen wich has quiet some widgets and such, all diffrent apps, in some folders like 100 apps etc.
Dr.Luigi said:
Ye it used to be quiet a bit faster, Might be Samsung OS i forgot the name of the OS but anyhow, wizard or something,
Oh well, i will just do it i guess and i will see on the road what apps i need, the rest clearly seems that i dont need em if i never use em.
I'm guessing that the best would be Clockwork recovery and the SUroot? together with cyanogen ROM and buffalo.
As apps goes its basicly my home screen wich has quiet some widgets and such, all diffrent apps, in some folders like 100 apps etc.
Click to expand...
Click to collapse
SuperSU is included in CF-Root and so is the most known, but Superuser (from Clockworkmod, the other Superuser is obsolete!) is a great open source alternative.
The best recovery is Philz, always based on CWM, but with extra and TWRP functions.
CyanogenMod yes, is the better choicr and also the easiest choice for root newbies.
Ps Buffalo is a kernel? If it's true, try BOEFFLA, is considered absolutely the best.
Simone98RC said:
SuperSU is included in CF-Root and so is the most known, but Superuser (from Clockworkmod, the other Superuser is obsolete!) is a great open source alternative.
The best recovery is Philz, always based on CWM, but with extra and TWRP functions.
CyanogenMod yes, is the better choicr and also the easiest choice for root newbies.
Ps Buffalo is a kernel? If it's true, try BOEFFLA, is considered absolutely the best.
Click to expand...
Click to collapse
Well i meant boeffla of course, Well i cant get it to work, What are the keys to get into TWRP recovery?
As in download mode it tells me its custom, but i cant get into it..
tryed quiet a few combis already
Dr.Luigi said:
Well i meant boeffla of course, Well i cant get it to work, What are the keys to get into TWRP recovery?
As in download mode it tells me its custom, but i cant get into it..
tryed quiet a few combis already
Click to expand...
Click to collapse
Edit:
Tryed again, i cant reboot if i did it would get the old recovery back, so in a push method it worked,
Now SuperSU, i might get a ROM but aint sure yet, Do kernels work on the stock rom aswell?
Dr.Luigi said:
Edit:
Tryed again, i cant reboot if i did it would get the old recovery back, so in a push method it worked,
Now SuperSU, i might get a ROM but aint sure yet, Do kernels work on the stock rom aswell?
Click to expand...
Click to collapse
Yes, BOEFFLA works also on stock rom (make sure to flash the correct zip file)... but I haven't understood your problem: can't reboot, old recovery back... what?
Simone98RC said:
Yes, BOEFFLA works also on stock rom (make sure to flash the correct zip file)... but I haven't understood your problem: can't reboot, old recovery back... what?
Click to expand...
Click to collapse
Ye nevermind that,
The problem is when i flashed my recovery, that when i reboot it switched automaticly back to the orginal stock recovery,
Only way to repair this was to not reboot, but goto the Philz recovery directly and reinstall the recovery program,
Also rooted it now,
So i can simple install Boefflo on my S3 international, With stock rom and ROOT, philz recovery?
If so that would be sweet ^^
As it should be more sufficient as far as battery goes, and a small overclock to like 1.6Ghz is reasonable ive heard,
1.8 is to high if i can believe those on some forums.
Since the last stable release you can overclock up to 1704 Mhz... and no more 1.5 Ghz step, I don't know the reason.
As I said, BOEFFLA works almost on every rom, but you habe to flash a different zip file for Samsung and AOSP roms.
Why can't you get a custom recovery? Are you sure to flash them reproducing properly the reported Odin guide (what to check in app, where to write file, etc.)?
It's a strange problem, rom "might" be cause by replacing the new recovery with the stock one, I think, but I'm not absolutely sure.
Simone98RC said:
Since the last stable release you can overclock up to 1704 Mhz... and no more 1.5 Ghz step, I don't know the reason.
As I said, BOEFFLA works almost on every rom, but you habe to flash a different zip file for Samsung and AOSP roms.
Why can't you get a custom recovery? Are you sure to flash them reproducing properly the reported Odin guide (what to check in app, where to write file, etc.)?
It's a strange problem, rom "might" be cause by replacing the new recovery with the stock one, I think, but I'm not absolutely sure.
Click to expand...
Click to collapse
Well like i said i've fixed that,
The standard way to flash doesnt work, As once i get booted in Samsung ROM, It fixes it, So you have to goto your Recovery immeaditly when youve flashed it, and flash it again in the custom recovery, and then it does work.
Well i will see, aint sure yet if i will do it the kernel and romming.
Thanks for the help
Dr.Luigi said:
Well like i said i've fixed that,
The standard way to flash doesnt work, As once i get booted in Samsung ROM, It fixes it, So you have to goto your Recovery immeaditly when youve flashed it, and flash it again in the custom recovery, and then it does work.
Well i will see, aint sure yet if i will do it the kernel and romming.
Thanks for the help
Click to expand...
Click to collapse
Here is also a great kernel. Check this out http://forum.xda-developers.com/gal...04-googy-max2-kernel-2-3-1-cm-camera-t2517875