Rafael baugis or hells fusion actually?
Also can anyone explain what a kernel actually is???????????
And what are custom kernel features over stock kernel????????
Sent from my GT-S5830i using xda premium
Rafael.Baugis is better than Hell_Lock for now. Hell_Lock is still improving his kernel.
For Stock Kernel:
1. You can not set governors for cpu control.
2. I/O schedulers are less.
3. Cpuspy will not able to work on your rom.
4. init.d will not be supported.
For Custom Kernel:
1. You can set governors for cpu control.
2. I/O schedulers are more.
3. Cpuspy will able to work on your rom. (You can see the current clock speed)
4. init.d will be supported. (You can add some tweaks with init.d)
nberk said:
Rafael.Baugis is better than Hell_Lock for now. Hell_Lock is still improving his kernel.
For Stock Kernel:
1. You can not set governors for cpu control.
2. I/O schedulers are less.
3. Cpuspy will not able to work on your rom.
4. init.d will not be supported.
For Custom Kernel:
1. You can set governors for cpu control.
2. I/O schedulers are more.
3. Cpuspy will able to work on your rom. (You can see the current clock speed)
4. init.d will be supported. (You can add some tweaks with init.d)
Click to expand...
Click to collapse
But custom kernel has SIM contact problem.
And actually hell_locks kernel has better features like dual boot or cm7 support
R: [QUESTION]What kernel is better actually?
Android-fany said:
But custom kernel has SIM contact problem.
And actually hell_locks kernel has better features like dual boot or cm7 support
Click to expand...
Click to collapse
Ok then only for now the rafael baugis is better?
Inviato dal mio GT-S5830i con Tapatalk 2
albi7894 said:
Ok then only for now the rafael baugis is better?
Inviato dal mio GT-S5830i con Tapatalk 2
Click to expand...
Click to collapse
Yes, it is for now
R: [QUESTION]What kernel is better actually?
Android-fany said:
Yes, it is for now
Click to expand...
Click to collapse
Ok thanks
Inviato dal mio GT-S5830i con Tapatalk 2
Why create new threads when you can ask it here
http://forum.xda-developers.com/showthread.php?t=2089279
may be the dumbest question, can anyone tell me how to flash custom kernel ??
can it be flashed via cwm or odin?
i am using stock rom, can i flash rafael kernel ?
Sent from my GT-S5830i using xda app-developers app
Error DF XX
Hello.
I have Simplicity v4 on my Ace, and everytime i turn it on it shows this error: Error DF XX. It was doing that before Simplicity, when i had my stock rom with Rafael Baugis kernel (I got the kernel with the installation of another rom, and i restored it back to my stock rom). Can someone please tell me what this error is about?
Thanks, Mokustus
Dude..use Odin and flash stock rom with stock kernel.later install the simplicity v4 this would help much better...this worked for me..
Sent from my GT-S5830i using xda app-developers app
Mokustus said:
Hello.
I have Simplicity v4 on my Ace, and everytime i turn it on it shows this error: Error DF XX. It was doing that before Simplicity, when i had my stock rom with Rafael Baugis kernel (I got the kernel with the installation of another rom, and i restored it back to my stock rom). Can someone please tell me what this error is about?
Thanks, Mokustus
Click to expand...
Click to collapse
Flash stock ROM using Odin, then flash simplicity ROM, then flash Rafael baugis kernel and then flash modules. It will work.
Sent from my GT-S5830i
Simplicity v4 + Rafael baugis kernel + Andrenaline Engine + Link2sd
---------- Post added at 09:54 PM ---------- Previous post was at 09:50 PM ----------
srt99 said:
may be the dumbest question, can anyone tell me how to flash custom kernel ??
can it be flashed via cwm or odin?
i am using stock rom, can i flash rafael kernel ?
Sent from my GT-S5830i using xda app-developers app
Click to expand...
Click to collapse
You can flash using cwm. And don't forget to flash the modules once you flashed the Rafael kernel.
Sent from my GT-S5830i
Simplicity v4 + Rafael baugis kernel + Andrenaline Engine + Link2sd
I want to install Rafael kernel
I'm on jelly blast rom And stock kernel
I know how to install it
But do I need to format my rom And install it again??????
Or simply install the kernel
And
Which recovery should I choose to install it????
What are the known bugs and any solution for it?????
Also scripts like link2sd would be wiped or not.........................
Tx in advance
Edit:Solved in help thread
Sent from my GT-S5830i using xda premium
I use another kernel
I can ad my opinion, about best kernel for our device.
http://forum.xda-developers.com/showthread.php?t=2060515
This is - Interactive nit Kernel for GT-S5830i
Kernel Features:
Freqs:
156 MHz
312 MHz
624 MHz
832 MHz
Governors:
Intellidemand
InteractiveX
SmartassV2
Conservative
bcm21553
Performance
I/O Schedulers
noop
deadline
cfq
vr
sio --> Got this one from Rafael Baugis Source. Thankyou Rafael, hope this is not an inconvenient.
Fatures:
Enabled Module Loading
Init.d Support
Improved kernel scripts (Many of them, i dont really know why Samsung is opensourcing such sources. I know this is a low cost phone, but...)
Swap support
Ramzswap support
Root --> Kernel is all ready rooted, su is in xbin as usual lol.
Camera, Flash, Wifi etc etc etc... is working fine.
Filesystem Support
ext2, 3, 4
Msdos
VFAT
YAFFS2
JFFS2
You can follow my link above, to download .tar file or below, to download . zip file for CWM5 instalation
About SIM-contacts bug - I don't use this option, so I don't know it works or not
ryjii said:
I can ad my opinion, about best kernel for our device.
http://forum.xda-developers.com/showthread.php?t=2060515
This is - Interactive nit Kernel for GT-S5830i
Kernel Features:
Freqs:
156 MHz
312 MHz
624 MHz
832 MHz
Governors:
Intellidemand
InteractiveX
SmartassV2
Conservative
bcm21553
Performance
I/O Schedulers
noop
deadline
cfq
vr
sio --> Got this one from Rafael Baugis Source. Thankyou Rafael, hope this is not an inconvenient.
Fatures:
Enabled Module Loading
Init.d Support
Improved kernel scripts (Many of them, i dont really know why Samsung is opensourcing such sources. I know this is a low cost phone, but...)
Swap support
Ramzswap support
Root --> Kernel is all ready rooted, su is in xbin as usual lol.
Camera, Flash, Wifi etc etc etc... is working fine.
Filesystem Support
ext2, 3, 4
Msdos
VFAT
YAFFS2
JFFS2
You can follow my link above, to download .tar file or below, to download . zip file for CWM5 instalation
About SIM-contacts bug - I don't use this option, so I don't know it works or not
Click to expand...
Click to collapse
Do you got permission for mirroring his work?
Sent from my GT-S5830i using xda premium
about axyllm's work
uchihachi said:
Do you got permission for mirroring his work?
Sent from my GT-S5830i using xda premium
Click to expand...
Click to collapse
First of all, I'm not mirroring his work, I've made a link, on his work, and i'm not tellin' to averybody, that it is my work.
Second, take a look how this poste calls, I've just made my opinion.
If it will be easier for you, you can thing that it is a promo of his work.
He has made a good job, and I want to tell to everyone, that his kernel is the best for our device.
Sorry for my mistakes in text I use my smartphone.
ryjii said:
First of all, I'm not mirroring his work, I've made a link, on his work, and i'm not tellin' to averybody, that it is my work.
Second, take a look how this poste calls, I've just made my opinion.
If it will be easier for you, you can thing that it is a promo of his work.
He has made a good job, and I want to tell to everyone, that his kernel is the best for our device.
Sorry for my mistakes in text I use my smartphone.
Click to expand...
Click to collapse
So you shouldnt put the zip file link to download the the kernel. Just put link to redirect to the thread. Let people download from the original thread.
Sent from my GT-S5830i using xda premium
albi7894 said:
Rafael baugis or hells fusion actually?
Click to expand...
Click to collapse
hells fusion Discontinued
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
PHONE- GALAXY ACE S5830I
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
one more litle thing
uchihachi said:
So you shouldnt put the zip file link to download the the kernel. Just put link to redirect to the thread. Let people download from the original thread.
Sent from my GT-S5830i using xda premium
Click to expand...
Click to collapse
I made it.
I just copied one of the contacts from my phone to sim, My phone sees them very well, so this kernel does not have a problem with the contacts on the SIM card
how to change kernel of galaxy ace gt5830i
I am new to these things!!
so can anyone tell me how to change the kernel for galaxy ace?
i have already rooted the phone.
so can anyone tell me the next steps?
Related
Hey flashers
Netchip´s kernel was terribly, there where thousand and one bugs.
Such max overclock to 1400 MHz, no GPU overclocking, bad scripts.
Scripts who works not, it was one big drama.
But it was also great, light, quick, not one fancy kernel.
TEST version dont have all features!
Netchip is not responsible for damage caused by the kernel and / or device.
If you encounter problems using this kernel, in what a way, I am not responsible.
You flashed the kernel, it is your responsibility.
This kernel is very very unstable, and not tested
Click to expand...
Click to collapse
And here I come to introduce my new kernel .
It is not a big drama, it is super, fixed some bugs by Samsung, CPU overclocking to 1.6 GHz, GPU overclocking, BFQ v2-r1, BLN, bootlogo, bootanimation and much more in the future .
I am inspired by Hacre, Chainfire and HellcatDroid.
Hellcat is very kind, and helps me with ex. the compile issue.
Also Hacre was nice together me, ex. the CPU overclocking code.
But now further on the kernel, the features
-ATT sources with 2.6.37.14 kernel
-Bootanimation support, place it in /system/media/bootanimation.zip
-Bootlogo, place it in /sdcard/getin, and give it the name, logo.png
-CPU overclocking till 1.6GHz
-GPU overclocking
-BFQ v2-r1
-Removed other schedulers
-Instant root
-Busybox
-Clockworkmod 5
-KI3 initramfs
-I use the "hidden" p12 partition as tmp, so if bootlogo dont work, lemme fix it
-Compiled with AOSP 4.4.0 toolchain
-BLN
-Init.d support - /system/etc/init.d/
-EFS backup script
-Touchscreenfix set to 5 - thanks to vitalij
It is newb friendly, you can flash it via Odin, and all is installed
Thus flash it via Odin!
Flash the BETA version only if you know what you do.
Bootlogo
I have made this bootlogo for you:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
You can install it by making a file: "/hidden/bootlogo_netchip"
Reboot the system, and let it booting further.
If you want to go back to stock, flash stock firmware or take standard bootlogo and copy it in "/sdcard/getin/logo.png"
Future idea´s:
-Version with CFQ
-Fix bugs
Sources
Here you go
Changelog
Update7: Tuned a lot of I/O settings, CPU settings, GPU settings
Update8: CPU tuned
Update9: KI8, rebased on ATT sources with 2.6.35.14
Credits to:
Hellcat - for helping me with somethings and help me with bootlogo
Hacre - for the sources and the help
Netarchy - because you write nice code
connexion2005 - for the original idea of bootlogo
arighi - for this patch and the patches for the kernel
gokhanmoral - idea patching kernel up for fixing AOS bug
Always nice to see new stuff surfacing in our forums.I'm gonna be trying this one soon.
One thing though.Have you also included any GPU voltage controlling scripts or something?Because having the ability to "overclock" the GPU is utterly useless unless we can up the volatges a little.Next available frequency is 400MHz(make no mistake,nothing else between stock 267MHz and 400MHz works.Clock values must be 800 divided by an integer),and that needs some more juice than the stock 1050mV.With Tegrak's app I used to use 1100mV just fine.
Apart from that,all seems good.Good work man.
Hi netchip and thanks for your work.
Is BLN support inserted?
You haven't written it in your kernel's features
tolis626 said:
Always nice to see new stuff surfacing in our forums.I'm gonna be trying this one soon.
One thing though.Have you also included any GPU voltage controlling scripts or something?Because having the ability to "overclock" the GPU is utterly useless unless we can up the volatges a little.Next available frequency is 400MHz(make no mistake,nothing else between stock 267MHz and 400MHz works.Clock values must be 800 divided by an integer),and that needs some more juice than the stock 1050mV.With Tegrak's app I used to use 1100mV just fine.
Apart from that,all seems good.Good work man.
Click to expand...
Click to collapse
You can overclock the GPU as by ninphetamine
HTCDevil said:
Hi netchip and thanks for your work.
Is BLN support inserted?
You haven't written it in your kernel's features
Click to expand...
Click to collapse
Yes, it is included, but I have forgotten one file ...
I update soon.
Updated it
OMG, already 36 downloads
Is there a maximal filesize for the bootlogo? What do I have to do for the yellow triangle and the Galaxy S2 bootlogo to disappear, and show the custom logo instead?
janis605 said:
Is there a maximal filesize for the bootlogo? What do I have to do for the yellow triangle and the Galaxy S2 bootlogo to disappear, and show the custom logo instead?
Click to expand...
Click to collapse
I dont know about filesize (check hellcats thread), the resolution is 480x800. If you have yellow triangle, remove him with chainfires idea.
Edit: it is 100KB
Sent from my GT-I9100 using XDA App
Hey chip. Good to see you coding in the SGS 2 realm
Edit* Yes you are the chip I thought you were
uppon2 said:
Hey chip. Good to see you coding in the SGS 2 realm
Click to expand...
Click to collapse
Which chip you meaning?
Im only developer @ SGSL and SGS+ and SGS2.
Not on other things.
BTW. I go download the new 2.3.5 firmware and release my new kernel for it
Released a version for 2.3.5
netchip said:
Hey flashers
Netchip´s kernel was terribly, there where thousand and one bugs.
Such max overclock to 1400 MHz, no GPU overclocking, bad scripts.
Scripts who works not, it was one big drama.
But it was also great, light, quick, not one fancy kernel.
And here I come to introduce my new kernel .
It is not a big drama, it is super, fixed some bugs by Samsung, CPU overclocking to 1.6 GHz, GPU overclocking, BFQ v2-r1, BLN, bootlogo, bootanimation and much more in the future .
I am inspired by Hacre, Chainfire and HellcatDroid.
Hellcat is very kind, and helps me with ex. the compile issue.
Also Hacre was nice together me, ex. the CPU overclocking code.
But now further on the kernel, the features
-Bootanimation support, place it in /system/media/bootanimation.zip
-Bootlogo, place it in /sdcard/getin, and give it the name, logo.png
-CPU overclocking till 1.6GHz
-GPU overclocking
-BFQ v2-r1
-Removed other schedulers
-Instant root
-Busybox
-Clockworkmod 4.0.1.5
-KI3 initramfs
-I use the "hidden" p12 partition as tmp, so if bootlogo dont work, lemme fix it
-Compiled with AOSP 4.4.0 toolchain
-BLN
It is newb friendly, you can flash it via Odin, and all is installed
Thus flash it via Odin!
MD5Sum
5f96eec48ab51941216146c6d97d1a6b
Future idea´s:
-Init.d support
-Version with CFQ
-Fix bugs
-You can vote for a name
Credits to:
Hellcat - for helping me with somethings and help me with bootlogo
Hacre - for the sources and the help
Netarchy - because you write nice code
connexion2005 - for the original idea of bootlogo
Click to expand...
Click to collapse
You are fast man ^^
chadouming said:
You are fast man ^^
Click to expand...
Click to collapse
Because it is easy .
Thanks m8, do you use it?
Sent from my GT-I9100 using XDA App
Someone else with WLAN error?
Bajo76 said:
Someone else with WLAN error?
Click to expand...
Click to collapse
Try to use intratechs ki3 version.
Its maybe the rom.
Sent from my GT-I9100 using XDA App
netchip said:
You can overclock the GPU as by ninphetamine
Click to expand...
Click to collapse
You can only overclock the frequency not voltage, hence Hacre's script for GPU is useless. The only real viable solution for GPU OC is in combination with TegraK's module.
Maybe i´ll try later, reflashing orig ki3-kernel now.
jlevy73 said:
You can only overclock the frequency not voltage, hence Hacre's script for GPU is useless. The only real viable solution for GPU OC is in combination with TegraK's module.
Click to expand...
Click to collapse
Yeah, but I dont know it works on 2.3.5
Sent from my GT-I9100 using XDA App
netchip said:
Because it is easy .
Thanks m8, do you use it?
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
Currently downloading 2.3.5, gonna test it as soon i have it install for first impression ^^
Bajo76 said:
Maybe i´ll try later, reflashing orig ki3-kernel now.
Click to expand...
Click to collapse
Lemme know if it is fixed.
Sent from my GT-I9100 using XDA App
Hi all,
I'm glad to announce the first custom kernel and rom for YP-G1 - Galaxy S WiFi 4.0 EU and USA version
IMPORTANT NOTICE: DON'T TRY TO INSTALL ON A galaxy S wifi 5.0 player or a Korean Galaxy S wifi 4.0 => It will brick your device
IMPORTANT NOTICE: If you have a USA Galaxy player 4.0 install only the usa kernel. If you have an international Galaxy Player 4.0 you can install only the EU kernel or first the ROM and then the latest kernel.
Kernel changelog:
[CURRENT KERNELS]
STeVE's Kernel 3.0
-Based on STeVE's kernel 2.1
-Added all major cpu governors (interactive, interactivex, smartassv2, lazy). Interactive is now the default one for good responsivity
-Added all major I/O schedulers (sio,v(r),bfq,...). SIO is the default one
-Maximized SD card read speed with read ahead
-Init.d script support (Klin's patch)
-Overclock and undervoltage support
At default, no overclock is applied. Kernel is tweaked for good battery/performance ratio. If you want you can tune your parameters using SetCPU (available on market) or similar programs.
USA Download: http://dl.dropbox.com/u/59125319/STeVEs-3.0-USA.tar
EU Download: http://dl.dropbox.com/u/59125319/STeVEs-3.0-EU.tar
[OLD KERNELS]
STeVE's Kernel 2.1 for YP-G1 USA only (thanks -sandro- for testing)
-Based on STeVE's 1.0 Kernel
-Added ClockWorkMod Recovery: you can flash zip updates, backup/restore the whole rom, mount storage on recovery and more
-Works with stock samsung gingerbread rom.
-To use voodoo sound you need, after kernel flashing with odin, to install Voodoo control or Voodoo Control Plus
NOTE: Don't use ROM Manager: it's a modified version of CWM so it won't work correctly
Download link to the kernel flashable tar with Odin:
http://dl.dropbox.com/u/59125319/STeVEs-2.1-USA.tar
STeVE's Kernel 2.1 for YP-G1 EU only
-Based on STeVE's 1.0 Kernel
-Added ClockWorkMod Recovery: you can flash zip updates, backup/restore the whole rom, mount storage on recovery and more
-Can work with XXKPN and XXKPQ stock samsung rom.
-To use voodoo sound you need, after kernel flashing with odin, to install Voodoo control or Voodoo Control Plus
NOTE: Don't use ROM Manager: it's a modified version of CWM so it won't work correctly
Download link to the kernel flashable tar with Odin: http://dl.dropbox.com/u/59125319/STeVEs-2.1-EU.tar
STeVE's Kernel 1.0 for YP-G1 EU only
-Based on Original XXKPQ Kernel
-Added Voodoo sound patches
-Can work with XXKPN and XXKPQ stock samsung rom.
-To use voodoo sound you need, after kernel flashing with odin, to install Voodoo control or Voodoo Control Plus
ROM Changelog - only for YP-G1 EU:
-Contains the STeVE's Kernel 1.0. If you want to update to kernel 2.1, flash it after flashing the rom
-Based on original XXKPQ samsung stock rom
-Contains root and superuser permissions
-Tweaked theme: honeycomb statusbar icons, transparent notification pane, ICS windows effects
-CRT screen off animation
-If you start from a XXKPN or XXKPQ you can skip wipe to keep your existing applications and settings
Here's the link to the rom flashable TAR with ODIN: http://dl.dropbox.com/u/59125319/steves-10.tar
ODIN flash instructions:
1) Put your player in DOWNLOAD MODE (With the device powered off press simultaneously Power button, menu button and volume down button until a green android symbol appears)
2) open ODIN and connect your player via usb
3) in ODIN window select PDA and choose the packet tar you want to flash
4) Keep sure Re-Partition in unselected (OR YOU WILL BRICK THE DEVICE)
5) Press start and Wait the end of the procedure (don't disconnect the device until flashing is complete or you will brick the device)
Note: Please try this at your own risk. I will not be responsible for bricked devices
https://github.com/sdonati84/Galaxy-Player-4.0-Kernel
Thanks -SteveS-, great work!!! now we need a custom rom for the YP-G70!!
Hi,
Can someone point me to a ROM for Korean Galaxy S wifi 4.0(YP-GB1CW/LGU )
Thanks.
Would it work on Hong-Kong model? I have no dmb.
Sent from my YP-G1 using xda premium
ultimdan said:
Would it work on Hong-Kong model? I have no dmb.
Sent from my YP-G1 using xda premium
Click to expand...
Click to collapse
I have one too and it works ROM and Kernel but its a European ROM so locale will be different
Wheatly said:
I have one too and it works ROM and Kernel but its a European ROM so locale will be different
Click to expand...
Click to collapse
For the locale download morelocale 2.
STeVE,
I have a player 5.0 wifi with the latest ota ki8 2.3.5 on it.
I have dumped the system got the pit and deodexed...zipaligned....batxh optimized....currently working in mods and and a custom theme...
Problem....i only have the device a few more days.
Question
Would you like to help me cwm the recovery for the zImage?
Nothing fancy
And I will mod the files for the recovery. I just need help with compiling and repacking.....i dont have the time to be guessing and playing.
Say do you think you have the time to work on this with me?
Sent from my SAMSUNG-SGH-I897 using Tapatalk
Johnsondr80 said:
STeVE,
I have a player 5.0 wifi with the latest ota ki8 2.3.5 on it.
I have dumped the system got the pit and deodexed...zipaligned....batxh optimized....currently working in mods and and a custom theme...
Problem....i only have the device a few more days.
Question
Would you like to help me cwm the recovery for the zImage?
Nothing fancy
And I will mod the files for the recovery. I just need help with compiling and repacking.....i dont have the time to be guessing and playing.
Say do you think you have the time to work on this with me?
Sent from my SAMSUNG-SGH-I897 using Tapatalk
Click to expand...
Click to collapse
Ok, tell me what to do...
-SteveS- said:
Ok, tell me what to do...
Click to expand...
Click to collapse
Compiling recovery
I got kernel unpacking and repacking I think. But compiling rexovery has been a problem.
I got koush's rebootable android recovery.
But I cant get it to build.
Sent from my SAMSUNG-SGH-I897 using Tapatalk
Johnsondr80 said:
Compiling recovery
I got kernel unpacking and repacking I think. But compiling rexovery has been a problem.
I got koush's rebootable android recovery.
But I cant get it to build.
Sent from my SAMSUNG-SGH-I897 using Tapatalk
Click to expand...
Click to collapse
I don't know if it helps but maybe it don't work because it is not like the normal android devices because samsung devices use initramfs.
http://www.koushikdutta.com/2010/10/porting-clockwork-recovery-to-new.html
EDIT: Removed due to some bugs that need to be fixed
what is the difference between the eu and us versions that they're not the same?
---------- Post added at 02:03 PM ---------- Previous post was at 01:55 PM ----------
I got it... its the home button :-(
Hi -SteveS- and XDA Community, i wanna thank you steve, for such an splendid work this is the first step for us to customize our devices so Thanks!. I have tested it and it runs great, i liked the notification icons, though the crt animation doesnt work or i dont know if i have to activate it or something, i imagine it's the same on Droid X2 animation the one that closes the screen from top/bottom to the center, right, well i cant see it.
I took the liberty, since there is no screenshots of the ROM anywhere, to take them:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
For the Original Pics HERE
Feel Free to use them if you want!
sodomywar said:
I have tested it and it runs great, i liked the notification icons, though the crt animation doesnt work or i dont know if i have to activate it or something, i imagine it's the same on Droid X2 animation the one that closes the screen from top/bottom to the center, right, well i cant see it.
Click to expand...
Click to collapse
Hi, have you enabled all window animations under Settings -> display?
Thanks for the screenshots!
Considering I can move around linux ( I do web servers management) are you able to guide through what you did so I can compile the kernel with voodoo sound for the US version?
I mean what changes? The source where to start from?
Hey folks
Should the room work with TAIWAN/HONGKONG version?
Anyone here has tried with it???
I have mine that was bought in Taiwan. Still in the Stock Rom now
Added USA version in first post. Also 2.1 changed to stable.
-sandro- said:
Considering I can move around linux ( I do web servers management) are you able to guide through what you did so I can compile the kernel with voodoo sound for the US version?
I mean what changes? The source where to start from?
Click to expand...
Click to collapse
Yes - consider this a request for source code in accordance with section 3 of the GNU General Public License version 2 under which the Linux kernel is licensed.
Happy voodoo sound to all
Has anyone tested and confirmed working on the 4.0 U.S model?
X Kernel 2.6.32.59
This is DoomLord based kernel, I just add a few stuff so most of the credit are for him and other developers in FXP project...
Features:
almost all DoomKernel features (OC to 2Ghz, USB OTG, Tiny RCU, TUN/TAP, slqb memory allocator, Two Way Call Recording, Debugging removed, autoroot, CWM, init.d support etc...
What I changed:
Updated to 2.6.32.58 from the upstream. most patch are clean, some are added manualy
change CONFIG_RWSEM_GENERIC_SPINLOCK to CONFIG_RWSEM_XCHGADD_ALGORITHM (optimized for ARM)
Swap enabled and ZRAM added from Faux123 github
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
CPU governor
Performance
Powersave
Userspace
Ondemand (Default)
Conservative
Interactive
MinMax
SmartassV2
Brazilianwax
Smoothass
InteractiveX
SavagedZen
Lagfree
Scary
I/O Scheduler
Noop
Ancipatory
Deadline
CFQ
BFQ
VR
SIO
Supported file system:
ext2/3/4
fat32
NTFS
ISO9660
YAFFS2
Please report if there is some issues with these kernel, I'm not a real kernel developers (just applying patches i think it doesn't count), I don't understand any C language, but I'll try to do my best to fixed it.
However I am NOT responsible if you damage your phone! please use it at your own risk!
How to Use it:
make backup of your original wlan modules
Put the downloaded wlan module (xxxxx_wlan_v3.zip) in your sdcard
Power off the phone
Connect the phone to the PC while pressing up volume to enter fastboot mode (the led is turning blue)
Use Flashtool to flash the boot.img or using fastboot --> fastboot flash boot boot.img or if it doesn't do anything fastboot -i 0xfce flash boot boot.img
Reboot the device
Press continuously the volume down button to get in the recovery
Choose install zip from sdcard; install xxxxx_wlan_v3.zip
In CWM go to advance menu and do a dalvik cache wipe... (fist boot will take a minutes to 3 minutes longer because it will create a new dalvik cache)
Reboot the phone
Zram is enabled in default setting., to disable it delete this file --> /system/etc/init.d/00zraminstall
to enable it again delete this file --> /system/zraminstall (v3) or /system/zraminstall2 (v4)
Click to expand...
Click to collapse
V4 Changelog
fix bootloop in costum rom with built in recovery for locked bootloader
disable 1,9ghz and 2ghz cpu freq... it causes random crash and not as stable as other freq so OC only enabled tp 1,8ghz
Updated to 2.6.32.59
Led notification light for entering the CWM
New KGSL driver ported from 2.6.35 kernel [adridu59]
Updated some android staging driver from 3.3/3.4-rc1 kernel git
Updated zram driver, modified to use snappy compression instead of LZO
Updated touchscreen driver from .74 kernel source
Mount partition as noatime (kernel default) and set as non-rotational (using init.d script)
Increase default minfree setting a little bit
More and more changes can be seen at my github commit
V3 Changelog
fix FM Radio bug
Updated to 2.6.32.58
Increase GPU memory to 4MB (before is 2MB) thanks to DooMLord
Updated few MSM driver from codeaurora.org
Other changes can be seen at my github commit
V2.1 Changelog:
fix VPN bug
Fix missing CPU freq setting from DoomLord Github
Salvaged some RAM thanks to jerpelea
Fix Ramdisk to install zram at default
Remove some unnecessary driver
Fix long startup at boot (please test it)
updated to 2.6.32.56
V2 Changelog:
Rebranding it to X kernel
Update cpu freq driver from Doomlord Github
Update Patched Battery driver by Bazoocaze
Expanding support to Mini, Mini Pro and Active (please be advised, I don't have the device so I can't test it, but I don't have any compiling problem Please report to me if any of you find one...)
Remove NFS and CIFS support
KNOWN BUG:
Compass may not working correctly in active... please report if there is any changes in the new kernel, I don't have the device to test it...
DOWNLOAD:
Live with walkman: Kernel | Wlan Modules
Xperia Active: Kernel | Wlan Modules
Xperia Mini: Kernel | Wlan Modules
Xperia Mini Pro: Kernel | Wlan Modules
Click to expand...
Click to collapse
previous builds (v3):
Live with walkman: Kernel | Wlan Modules
Xperia Active: Kernel | Wlan Modules
Xperia Mini: Kernel | Wlan Modules
Xperia Mini Pro: Kernel | Wlan Modules
Click to expand...
Click to collapse
I would like to thanks to:
DoomLord for the base kernel
DuMOHsmol, I use his kernel source as my base kitchen
Faux123, for the ZRAM script
adridu59 for the help and support
Source Code
I just open my GitHub account few days ago, I've upload the source there (I'm new at this, so the commit it a rather bit messy, but it contain my last source code)
here is the link:
https://github.com/krizky82
bump... 297 views but nobody giving comment?
please do... even if you think it sucks...
I don't see files /system/etc/zram.sh and /system/etc/init.d/00zram, no zram device. I guess you push it in autoroot script in ramdisk and if device already rooted...
---------- Post added at 09:19 PM ---------- Previous post was at 09:16 PM ----------
I've deleted /system/autorooted file and rebooted phone but no changes...
---------- Post added at 09:20 PM ---------- Previous post was at 09:19 PM ----------
Could you upload that scripts?
Works great on my Xperia Mini!
As the above post, do not locate the files zram.
One thing I noticed is that using the kernel KRsH Rage or I get the warning for the latest update FW62 (I am in FW62), and using your do not have this problem, for this would be the last version?
Thank you!
Thanks will flash it and response
Sent from my ST15 using XDA App
radmir said:
I don't see files /system/etc/zram.sh and /system/etc/init.d/00zram, no zram device. I guess you push it in autoroot script in ramdisk and if device already rooted...
---------- Post added at 09:19 PM ---------- Previous post was at 09:16 PM ----------
I've deleted /system/autorooted file and rebooted phone but no changes...
---------- Post added at 09:20 PM ---------- Previous post was at 09:19 PM ----------
Could you upload that scripts?
Click to expand...
Click to collapse
Gustavo RD78 said:
Works great on my Xperia Mini!
As the above post, do not locate the files zram.
One thing I noticed is that using the kernel KRsH Rage or I get the warning for the latest update FW62 (I am in FW62), and using your do not have this problem, for this would be the last version?
Thank you!
Click to expand...
Click to collapse
I'll take another look at the ramdisk...
for the script you can use the zip files from this tread http://forum.xda-developers.com/showthread.php?t=1207251
download the zram.zip from the attachment and flash it from CWM
the for now it will be the last version but if I have a bug fixed or an update, I'll post an update
nimbold said:
Thanks will flash it and response
Sent from my ST15 using XDA App
Click to expand...
Click to collapse
thanks...
any improvement using zram?
Soulfly1976 said:
any improvement using zram?
Click to expand...
Click to collapse
Creates RAM based block devices: /dev/zramX (X = 0, 1, ...). Pages written to these disks are compressed and stored in memory itself. These disks allow very fast I/O and compression provides good amounts of memory savings.
-From a SEARCH in xda.
Good work krizky82... glad to see ppl improving the semc xperia kernel...
Sent from my LT15i using XDA App
This kernel definitely looks promising.
Just flashed it and it is working good so far without any glitches.
Will give a feedback after I see how the battery life is doing.
Thanks for your contribution in the Xperia Lineup.
Best regards
Btw I am using a Xperia Mini Pro
Flashed my mini this moment,
no problems so far
keep up the good work
Flashed it and works great!
battery life is good i think. 2 hours in stand by and 1% drop.
5 hours display and wifi on and 30% yet remaining
but i have some problem with VPN which every time i try to connect via L2TP if display goes off, the phone will reset. but if i force screen been on (toching) it won't and connects successfully. don't know it's Kernel problem or not. but last kernel i used (KRsH) didn't have this problem.
Thanks in advance
I downloaded your kernel sources, /sbin/installzram.sh script just doesn't exist in ramdisk.
radmir said:
I downloaded your kernel sources, /sbin/installzram.sh script just doesn't exist in ramdisk.
Click to expand...
Click to collapse
yes... I made a mistake after editing the ramdisk, it will be fixed after an update
meanwhile you can install this zram.zip from CWM...
nimbold said:
Flashed it and works great!
battery life is good i think. 2 hours in stand by and 1% drop.
5 hours display and wifi on and 30% yet remaining
but i have some problem with VPN which every time i try to connect via L2TP if display goes off, the phone will reset. but if i force screen been on (toching) it won't and connects successfully. don't know it's Kernel problem or not. but last kernel i used (KRsH) didn't have this problem.
Thanks in advance
Click to expand...
Click to collapse
It could be a kernel problem, there is a some compiling warning using gcc 4.6.3 one of them is a tunneling protocol, I've patched it so it doesn't gives warning (not as much as before) I'll going to take another look than at the script
iceeyes91 said:
This kernel definitely looks promising.
Just flashed it and it is working good so far without any glitches.
Will give a feedback after I see how the battery life is doing.
Thanks for your contribution in the Xperia Lineup.
Best regards
Btw I am using a Xperia Mini Pro
Click to expand...
Click to collapse
ajzak said:
Flashed my mini this moment,
no problems so far
keep up the good work
Click to expand...
Click to collapse
DooMLoRD said:
Good work krizky82... glad to see ppl improving the semc xperia kernel...
Sent from my LT15i using XDA App
Click to expand...
Click to collapse
thanks all for the support
krizky82 said:
It could be a kernel problem, there is a some compiling warning using gcc 4.6.3 one of them is a tunneling protocol, I've patched it so it doesn't gives warning (not as much as before) I'll going to take another look than at the script)
Click to expand...
Click to collapse
I think i found the real issue. when wifi signal is weak (1 bar) the phone resets.
nimbold said:
I think i found the real issue. when wifi signal is weak (1 bar) the phone resets.
Click to expand...
Click to collapse
i dont hawe that problem! wifi is much beter than stock
ajzak said:
i dont hawe that problem! wifi is much beter than stock
Click to expand...
Click to collapse
yeah, but i don't mean it.
when wifi signal is weak and i want to connect VPN using L2TP phone resets. without VPN in any signal strenght it's really good though.
I check it on Xperia Active - works faster than stock kernel.
But hangs from time to time when booting (50%/50%) on "SONY ERICSSON" appears.
May be it is because of new CPU frequency driver.
UPD: After few minutes of hour (don't know) the magnetic and orientation sensors are goes off until next reboot. It happend twice today.
nimbold said:
yeah, but i don't mean it.
when wifi signal is weak and i want to connect VPN using L2TP phone resets. without VPN in any signal strenght it's really good though.
Click to expand...
Click to collapse
Is there any free L2TP VPN service I could try? I google it but I can't find any free sites that doesn't need a credit card account
himasura said:
I check it on Xperia Active - works faster than stock kernel.
But hangs from time to time when booting (50%/50%) on "SONY ERICSSON" appears.
May be it is because of new CPU frequency driver.
UPD: After few minutes of hour (don't know) the magnetic and orientation sensors are goes off until next reboot. It happend twice today.
Click to expand...
Click to collapse
I'll try to test is some more and revert to the old cpuclock driver...
But I can't promise to post an update soon though... I get stuck on my job lately...
Sent from my WT19i using XDA App
The wait is over, Siyah v4 for the I777 is finally here!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Full credit of course goes to Gokhanmoral. Go thank him for creating this great fully customizable kernel RIGHT NOW!!!
Click to expand...
Click to collapse
This kernel is built from Gokhanmoral's Sources
with some tweeks to make everything run smoothly on our I777's
Click "Thanks" if you like what you see or donate with my link.
Click to expand...
Click to collapse
Download v4.3.3 - CM10/AOKP MALI - CWM Flashable
WITH mic swap
http://www.mediafire.com/?tdgw4376kq0xrpz
Download v4.3.3 - ICS
WITH mic swap
http://www.mediafire.com/?cuoltoop7nr3se9
WITHOUT mic swap
http://www.mediafire.com/?39q3t5yjsgj66cb
Click to expand...
Click to collapse
Install Instructions
1. Wipe cache
2. Wipe dalvik
3. If you are already on a previous version of Siyah, "Reset ExTweaks profiles" (its under "Kernel specific options")
4. Flash the kernel
5. Reboot and enjoy
It wont hurt your phone at all if you go with the wrong one and only takes a minute to flash the other.
Change Log and Dual-boot ROM instructions in Post #2. READ THE ENTIRE POST #2 BEFORE DOING ANYTHING WITH THE DUAL-BOOT!!!
Click to expand...
Click to collapse
Issues
If you are having issues with random reboots, you might need to run a kernel cleaner CWM script to clean things up. Here is a link to the main page for Jivy's script:
http://forum.xda-developers.com/showthread.php?t=1428530
Click to expand...
Click to collapse
KEY FEATURES
Should work with all ICS builds: Sammy, AOSP and AOKP roms
Auto-Rooting
Custom Touch Recovery
Boot animation support
ExTweaks support
Supports SetCPU (OC up to 1600Mhz, UC down to 100Mhz)
Supports UV/OC for GPU
Supports voltage control via SetCPU
init.d script support
Thunderbolt script support
BLN support
More to come as I think of them...
Click to expand...
Click to collapse
ROMS VERIFIED WORKING
MIUIANDROID (use "WITH mic swap kernel")
AOKP (use "WITH mic swap kernel")
CM9 (use "WITH mic swap kernel")
Criskelo (use "WITHOUT mic swap kernel")
Shostock2 (use "WITH mic swap kernel")
Phone-Bricker (use "WITH mic swap kernel")
Ultimatum (use "WITH mic swap kernel")
UCLD3 (use "WITHOUT mic swap kernel")
Omega (use "WITH mic swap kernel")
Click to expand...
Click to collapse
Here is a link to my sources for those that couldn't find it :good:
https://github.com/ktoonsez/siyahkernel3
DON'T FLASH ANY FILES FROM THE LINK BELOW, JUST FOR CHANGELOG INFO AND CREDIT!!!Link to Gokhanmoral Website
4.1beta5 Change Log
■Fix permissions issue causing crashing on bott with certain Sammy ROM's
4.1beta4 Change Log
■Linux 3.0.40
■CWM-Based Touch Recovery v6.0.1.1
■fixed led timeout not being saved
■new GPU frequency steps: 54, 108, 133, 160, 266, 330, 400, 440, 520MHz (Removed in beta4)
■added one more GPU step, we now have 4 GPU steps with 108, 160, 266, 330MHz defaults. (Removed in beta4)
■added ntt docomo gps support again (ntt-docomo users can use their previous scripts to get gps working)
■fixed movfilter not being changed with kmemhelper (should fix touch sensitivity problems)
■removed 25MHz and 50MHz CPU steps
■fixed led activity on brightness change
■ExTweaks settings will be reset because of GPU changes. if you revert back to a previous version make sure you reset ExTweaks settings manually.
■update beta1 -> beta4: fixed gamma shift not working in ExTweaks. removed all gpu modifications to make sure we have no problems with other parts. some users (including me) experienced no problems with new gpu steps whereas some users had kernel panics when the screen is off. Consider v4.1beta4 as 4.0.2 with linux 3.0.40 and cwm-based recovery 6.0.1.1.
3.5 Change Log
■bluetooth: support for 4.0.4 stock ROMs
■Whole butt load of merges from Tungstwenty
3.4.4 Change Log
■pegasusq fixes and tweaks
■added cfs tweaks settings to ExTweaks (samsung default, linux kernel default and thunderbolt script defaults)
■added Tungstwenty’s implementation that let’s us see deleted wakelock details (optional in ExTweaks)
■cherry-picked some wifi changes/fixes from cm9 repo
■added mdnie negative effect toggle to ExTweaks (by Tungstwenty)
■and some other tiny changes…
■Linux 3.0.36
■removed some potentially unsafe changes which might be the reason of some users having problems with the latest release.
■added ntt device gps support back. removed exfat related mess. added Entropy512′s patch to prevent multicast packets for added headphone amplification setting to extweaks (named it soundgasm). fixed data statistics and some other changes in config and sources…
3.4.3 Change Log
■Linux 3.0.36
■Several USB fixes
■NFSv4 issues addressed
■Fix overlapping static i/o mappings
3.4.2 Change Log
■Linux 3.0.35
Dual-Boot instructions and Notes
If you want to have another ROM as secondary ROM, follow these steps:
1.Make a nandroid backup of your existing ROM
2.wipe everything and install the other ROM
3.Boot the ROM and make customizations. Don’t forget to reflash SiyahKernel if the ROM flashes another kernel.
4.Use CWM Touch Recovery to clone your rom as secondary rom.
5.Restore nandroid backup
6.To boot from the secondary ROM, either press the HOME key or the VOLUME DOWN key when prompted.
Some notes about dualbooting:
■If you do not make any cloning you won’t be prompted to boot the second ROM.
■you may need to reflash this kernel after a nandroid restore if your nandroid backup is created with another kernel.
■you won’t be able to use mass storage mode for /sdcard in second rom because we have our data and cache partitions on /sdcard. only external sdcard will be mounted if you are using mass_storage mode. mtp should work fine for sdcard.
■once again, you won’t be able to flash any CWM flashable zip to second ROM.
More good information on dual-boot
http://forum.xda-developers.com/showpost.php?p=24724563&postcount=3296
First! So awesome!! Downloading now!
Sent from my SGH-I777 using xda premium
Awesome, thanks for bringing this to us!
Is it twice as fast because it double supports thunderbolt script? Jk thanks for the hard work
Is this for stock i777 ROMs?
Very nice!
Will be including this in my rom Phone-Bricker.
AJ Newkirk said:
Is this for stock i777 ROMs?
Click to expand...
Click to collapse
That is what it is designed to do. It works with my MIUI from miuiandroid and Criskelo. That is all I have tested so far
Just installed on AOKP, everything seems to be working as usual....... with OC/UC/UV options
I'll continue to test throughout the day to make sure there aren't any ill effects, but it looks like this is gonna be awesome!
LiLChris06 said:
Very nice!
Will be including this in my rom Phone-Bricker.
Click to expand...
Click to collapse
Ata boy....
flightsimmer said:
Just installed on AOKP, everything seems to be working as usual....... with OC/UC/UV options
I'll continue to test throughout the day to make sure there aren't any ill effects, but it looks like this is gonna be awesome!
Click to expand...
Click to collapse
Excellent
Works on Shostock2
Sent from my SGH-I777 using xda premium
Very nice
Runs great in task650 stock ics rom first run on quad was 3688 running at 1600/200
Sent from my SAMSUNG-SGH-I777 using xda premium
lilbigdude1 said:
Runs great in task650 stock ics rom first run on quad was 3688 running at 1600/200
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
Sweeeeeet
lilbigdude1 said:
Runs great in task650 stock ics rom first run on quad was 3688 running at 1600/200
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
Oh yeah that is what I was hoping for!!
Loading this bad boy up now!
Works great on UCPLC5!
So the microphones are correct for stock AT&T ROM it appears? Or are they reversed like in the Entropy512 kernel? Sorry I can't make a call to see for myself for some time
Seems to be running just fine on cm9 nightlie 4/09.
Great work!
Sent from my SGH-I777 using xda premium
Verified working on Phone-Bricker.
LiLChris06 said:
Verified working on Phone-Bricker.
Click to expand...
Click to collapse
Got you up in the OP. Give it a good run thru sence this is a fairly new kernel as it just came out of RC.
I am up for risks!
Touch recovery is rather nice, never used it till now.
Just installed it with AOKP.
Running really nicely so far, and it's actually greatly improved my scrolling, which was kind of so-so before.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
[B][CENTER][COLOR=Red][SIZE=5][FONT=Courier New]Disclaimer[/FONT][/SIZE][/COLOR][/CENTER]
[/B]
[CENTER][SIZE=4][FONT=Courier New][COLOR=Black]
* Your warranty is now void.. LOL I guess you knew it already.
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, you getting dumped or you getting fired because your phone*
* bootloops and alarm does not go off. Please do some research if you have any *
* concerns about features included in my kernel before using it! YOU and only*
* YOU are choosing to make these modifications.
*/IF You have a question post it in the thread,
Instead of Pm'ing me, as other users may experience your problems
[/COLOR][/FONT][/SIZE][/CENTER]
Click to expand...
Click to collapse
Features
Tiny RCU
Init.d support
Ext4, NTFS, SWAP
ZRAM-(Optional Included As flashable ZIP)
ro.secure=0, For ADB Acess
Compiled Using LINARO
Battery Performance Improved
Governors & IO shedulers Added
OverClock Upto 1.60GHz
CWM-5 & DUAL Recovery,(vibrate Notification Added)
Improved Memory ManageMent
VSync Enabled
2 Way Call Recording
Tweaked RAM Disk
And More
Click to expand...
Click to collapse
Added Io-schedulers
Noop
Anticipatory
Deadline
CFQ
BFQ
(Updated) SIO
Click to expand...
Click to collapse
Added Governors
lagfree
brazillianwax
smoothass
scary
savagedzen
smartass
smartassv2
interactivex
minmax
powersave
performance
conservative
ondemand
interactive
userspace
Lulzactive
Virtuous
Intellidemand
Lazy
Ondemandx
Lionheart
BadAss Governor
Superbad
Darkside
Click to expand...
Click to collapse
CREDITS
Sony- For Sources
singh_dd93- For Helping Me With Linaro, And Helped with RAM DISk errors
Wedgess-For giving me perfect infos, about kernel activities, and governers which i Use
DoomLord- For IO Shedulers & Governors
DD-Ripper- For all Banners and Signatures for this kernel.
Thanks to Ghostfreak NB- For testing and Helping me out
And Dont Forget To thank ME
Hit Thanks, Respect My Work, If Interested DONATE Me!
Changelog, Downloads & Installation
Changelogs
Code:
[B][FONT="Courier New"][SIZE="3"][COLOR="Red"]Version 2.0 (Released Only For MDPI Devices)[/COLOR][/SIZE][/FONT][/B][B][FONT="Courier New"][SIZE="3"]
*TWRP and CWM Versions Made (Choice to Flash Which U Like)
*Changed Bootlogo
*LMK (Optimization kindo supercharging)
*Zram enabled by default
*Improved 2D and 3D Graphics
[/SIZE][/FONT][/B]
[B][FONT="Courier New"][SIZE="3"][COLOR="Red"]Version 3.0[/COLOR][/SIZE][/FONT][/B][B][FONT="Courier New"][SIZE="3"]
---Additional Governers Added---
*Lulzactive
*Virtuous
*Intellidemand
*Lazy
*Ondemandx
*Lionheart
*BadAss Governor
*Superbad
*Darkside[/SIZE][/FONT][/B]
[B][FONT="Courier New"][SIZE="3"][COLOR="Red"]Version 4.0[/COLOR][/SIZE][/FONT][/B][B][FONT="Courier New"][SIZE="3"]
*0% battery patch
*Lowered vfs cache pressure to 25
*Added Compaction
*Used Linaro 4.7.3 for compiling (Thanks to wedgess for the Patch)
*Underclock upto 24Mhz and Overclock upto 1.6Ghz (Thanks to M66B)
*Google Snappy Compression & Decompression
*SLAB patch (Thanks to M66B)
*VDD Control (Thanks to DoomLord)
*LZO Compression
*Added Clean Cache
*Kernel Optimised, Now its Fast and Smooth
*KSM
[/SIZE][/FONT][/B]
Click to expand...
Click to collapse
Downloads
Radeon V4.0: Download
Older Downloads
Radeon V3.0 Download
Click to expand...
Click to collapse
Installation
Unzip the file to get 'Boot.img'
Open 'FlashTool'
Select 'FastBoot'
Flash the "boot.img"
Now Goto CWM "And Flash WIFI Modules"
Now Enjoy Your "Kernel"
Sources
RadeoN_Source Patch
Click to expand...
Click to collapse
Show your support for the kernel by adding this to your signature
Code:
http://img685.imageshack.us/img685/4089/1360941532178.png
Hit Thanks, Respect My Work, If Interested DONATE Me!
Confirmed working on all DEVICES, So enjoy and do Hit Thanks and support !
Guide to CHECK "ZRAM" Working
First Download the "Zram Zip" from Download Folder.
And flash it via CWM.
Now open 'Terminal' using 'Terminal emulator'
Now Type 'su' and 'enter' then type 'free' and enter, Now u will get a 'Screen Showing like This' "See Screenshot below.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Sounenhancement.apk (equalizer) bug fixing ! Thanks to varunrocks17
Just follow the steps
1. Go to soundmod zip(whichever you are using)
2. Extract etc folder from it.
3. Put that folder in system/vendor
4. In /etc change the permissions of audio.conf to "rw-r-r"
5. Reboot
6. Enjoy[
Click to expand...
Click to collapse
Just flashed in my neo. Everything seems to be working. will post more feedback.
hassib85 said:
Just flashed in my neo. Everything seems to be working. will post more feedback.
Click to expand...
Click to collapse
check for soundenhancement.apk fc
Sent from my MT11i using xda premium
Hi all, sorry, if this is stupid question, but is here a third kernel or what?
varunrocks17 said:
check for soundenhancement.apk fc
Sent from my MT11i using xda premium
Click to expand...
Click to collapse
There is no problem with the kernel source, It should be the defect in RAM disk, Dont worry I wil fix it soon or later
Sent from my WT19i using xda premium
Vsync enabled ,, isn't this feature specific for Jelly Bean?
varunrocks17 said:
check for soundenhancement.apk fc
Sent from my MT11i using xda premium
Click to expand...
Click to collapse
My sound enhancement working perfectly. I am on Optomax rom. I know what your problem is. You might be on those rom which walkman with advanced sound mod. I tested both suave kernel and sardulseth kernel. Both cause sound enhancement force close. So with this kernel also doing the same. Only alliance kernel work with those walkman.
daviduco said:
Can't mount usb storage from CWM.
Click to expand...
Click to collapse
Dnt knw, try flashing the modules, testers reported that its working, maybe problem with ur ROM !
Sent from my WT19i using xda premium
Tm for some bugfix
Finally equalizer bug is fixed
Jus follow the steps
1.go to soundmod zip(whichever u r using)
2.extract etc folder from it.
3.put tat folder in system/vendor
4.in /etc change the permissions of audio.conf to rw-r-r
5.reboot
6.njoy
Sent from my MT11i using xda premium
Oh! great job, thanks for your work, one question, can you compile a kernel for gb??? sorry for my bad english
Thank you for your great kernel!
Now with this kernel my phone runs very smooth
Again, thanks
Sent from my MT15i using xda app-developers app
Neo's sound / driver is broken , changed kernel and rom but not working.
Kernel is working but after flashing kernel all sound system is a down....
varunrocks17 said:
Tm for some bugfix
Finally equalizer bug is fixed
Jus follow the steps
1.go to soundmod zip(whichever u r using)
2.extract etc folder from it.
3.put tat folder in system/vendor
4.in /etc change the permissions of audio.conf to rw-r-r
5.reboot
6.njoy
Sent from my MT11i using xda premium
Click to expand...
Click to collapse
Just 1 small problem in the method. You are supposed to extract the audio.conf in system/vendor/etc of the sound mod zip. Not the audio.conf in the etc folder. Hope this makes it clear:laugh:
It would be great if ths is in OP.
Re: [KERNEL][LINARO][ICS][RADEON v3.0] For NEO & NEO V [15/01/2013]
XperiaNeoTurkey said:
Neo's sound / driver is broken , changed kernel and rom but not working.
Kernel is working but after flashing kernel all sound system is a down....
Click to expand...
Click to collapse
Maybe problem with ur device, no one other have this prob except 'soundenhancemen.apk' FC !
Sent from my WT19i using xda premium
stanlin salu said:
Maybe problem with ur device, no one other have this prob except 'soundenhancemen.apk' FC !
Sent from my WT19i using xda premium
Click to expand...
Click to collapse
thanks your answer but i call anyone and talked only not system sound for example anyone call me and dont play music.
Re: [KERNEL][LINARO][ICS][RADEON v3.0] For NEO & NEO V [15/01/2013]
XperiaNeoTurkey said:
thanks your answer but i call anyone and talked only not system sound for example anyone call me and dont play music.
Click to expand...
Click to collapse
Is it working for u in other kernels?
Sent from my WT19i using xda premium
stanlin salu said:
Is it working for u in other kernels?
Sent from my WT19i using xda premium
Click to expand...
Click to collapse
Normally, yes it worked.
I am researching this problem and find it http://talk.sonymobile.com/thread/37951
Maybe hardware , maybe kernel.
Firstly, i flashed kernel and sound is gone. I think kernel but researching maybe it's hardware.
I'll go service this Monday.
Re: [KERNEL][LINARO][ICS][RADEON v3.0] For NEO & NEO V [15/01/2013]
XperiaNeoTurkey said:
Normally, yes it's working.
I am researching this problem and find it http://talk.sonymobile.com/thread/37951
Maybe hardware , maybe kernel.
Firstly, i flashed kernel and sound is gone. I think kernel but researching maybe it's hardware.
I'll go service this Monday.
Click to expand...
Click to collapse
Ya, tats gud, I am using this same Zimage on all 2011 xperia device they r running fine !
Sent from my WT19i using xda premium