My Nook Tablet is not responding to touch. I tried factory resetting it. It does look good when it's starting but when we get to the Welcome Lady where it asks to watch video or skip, we touch our selection but it doesn't respond. Is this a common problem that anyone has encountered before and if so, how did you go on about fixing it? Thanks.
Sv: [q] nook doesn't respond to touch!
Have you had CM10 installed on it? If so it's because you had multi touch installed and didn't un install it properly.
asawi said:
Have you had CM10 installed on it? If so it's because you had multi touch installed and didn't un install it properly.
Click to expand...
Click to collapse
Yeah, I really don't know what i'm doing with the tablet. I mean I'm familiar with rooting and flashing but that's on my Android phone.
mcarbaja said:
Yeah,
Click to expand...
Click to collapse
Make sd cwm, flash back to cm10 Rom, undo multi touch, then return to stock.
Sent from my ST27i
satan89 said:
Make sd cwm, flash back to cm10 Rom, undo multi touch, then return to stock.
Sent from my ST27i
Click to expand...
Click to collapse
How do I do both?
mcarbaja said:
How do I do both?
Click to expand...
Click to collapse
How did you get into cm10 earlier? Same way
Look for bootable cwm thread in development section
Sent from my ST27i
satan89 said:
How did you get into cm10 earlier? Same way
Look for bootable cwm thread in development section
Sent from my ST27i
Click to expand...
Click to collapse
We bought it like that! From some guy on Craigslist.
http://forum.xda-developers.com/showthread.php?t=2089371
Sent from my ST27i
Does anyone know if I can use option A from this thread http://forum.xda-developers.com/showthread.php?t=2081981 to uninstall the multi touch driver? When we bought it it didn't come with an sd card so I'm assuming CM10 was installed internally and I'm wondering if booting from the sd card will allow me to make the necessary changes to remove multi touch. Thanks
Sent from my SGH-T989 using xda premium
Give it a try! It won't hurt anyway and it's really easy!
TY!
satan89 said:
http://forum.xda-developers.com/showthread.php?t=2089371
Sent from my ST27i
Click to expand...
Click to collapse
Fixed yesterday and uninstalled the 10 touch firmware nevertheless we're still on CM10. Thanks for pointing me in the right direction!
Related
Hello all, I hope this is the right place to ask this, but I recently crossed over to Android devices from BB so I'm still trying to figure out my way around things. Today I flashed ICS Android version 4.0.3, kernel version 3.0.8-perf-i717uclc5-cl281649 and build number iml74k.144 onto my Note and the installation went fine, had no problems at all, but now I can't install apps from my web browser(Chrome) onto my Note like I could before the flash. USB debugging is on.
Is this something that I may have done wrong? Any help would be much appreciated.
droid_noob1 said:
Hello all, I hope this is the right place to ask this, but I recently crossed over to Android devices from BB so I'm still trying to figure out my way around things. Today I flashed ICS Android version 4.0.3, kernel version 3.0.8-perf-i717uclc5-cl281649 and build number iml74k.144 onto my Note and the installation went fine, had no problems at all, but now I can't install apps from my web browser(Chrome) onto my Note like I could before the flash. USB debugging is on.
Is this something that I may have done wrong? Any help would be much appreciated.
Click to expand...
Click to collapse
U should back them up with titanium backup i personally would use android 4.0.4
Sent from my SAMSUNG-SGH-I717 using xda premium
What rom u on?
Sent from my SAMSUNG-SGH-I717 using xda premium
JB calhoun said:
What rom u on?
Sent from my SAMSUNG-SGH-I717 using xda premium
Click to expand...
Click to collapse
To be honest, I really don't know, like I said I'm coming from BB and still trying to figure everything out. Here's the link that I downloaded the ROM from:
rootzwiki.com/topic/22134-sgh-i717uclc5-ice-cream-sandwich
If anyone has a link to a better ROM, I'm definitely open to try them out. I would just like to know how to fix the problem of not being able to install apps from the Play Store from my web browser.
You can't install apps using Chrome browser from your PC ?
Why not use the Market (play store) app that's already on your phone? You have to have a Gmail account set up on your phone to access the market.
rangercaptain said:
You can't install apps using Chrome browser from your PC ?
Why not use the Market (play store) app that's already on your phone? You have to have a Gmail account set up on your phone to access the market.
Click to expand...
Click to collapse
I've been using the app that's on my phone but EVERYTHING on my phone got wiped and it's a bit easier to multi-task on a computer than it is a phone, so it's more about comfort ability at the moment, but this is just one issue arising, how many other, and potentially more serious issues are going to arise?
droid_noob1 said:
I've been using the app that's on my phone but EVERYTHING on my phone got wiped and it's a bit easier to multi-task on a computer than it is a phone, so it's more about comfort ability at the moment, but this is just one issue arising, how many other, and potentially more serious issues are going to arise?
Click to expand...
Click to collapse
This is not an issue... use the play market to get your apps.. not a PC... because you obviously don't know how.... what you explained is NOT an issue, its the wrong approach. Your fist mistake was downloading a rom from root wiki.. flash my rom.. Seraphim-Mesosphere, and be happy...
Sent from my SGH-I897 using xda premium
dman3285 said:
This is not an issue... use the play market to get your apps.. not a PC... because you obviously don't know how.... what you explained is NOT an issue, its the wrong approach. Your fist mistake was downloading a rom from root wiki.. flash my rom.. Seraphim-Mesosphere, and be happy...
Sent from my SGH-I897 using xda premium
Click to expand...
Click to collapse
Do as he says you will be like a child when Christmas morning comes
Sent from my SAMSUNG-SGH-I717 using xda premium
erpress ofhiciating
dman3285 said:
This is not an issue... use the play market to get your apps.. not a PC... because you obviously don't know how.... what you explained is NOT an issue, its the wrong approach. Your fist mistake was downloading a rom from root wiki.. flash my rom.. Seraphim-Mesosphere, and be happy...
Sent from my SGH-I897 using xda premium
Click to expand...
Click to collapse
I've been using my browser to install apps on my phone since I got, it's just started having this issue since I flashed an ICS rom, so it's not that I don't know how to do it, because I do, this is an issue with the rom.
But I will take your advice instead of try to argue with you, can you link me to your rom?
droid_noob1 said:
I've been using my browser to install apps on my phone since I got, it's just started having this issue since I flashed an ICS rom, so it's not that I don't know how to do it, because I do, this is an issue with the rom.
But I will take your advice instead of try to argue with you, can you link me to your rom?
Click to expand...
Click to collapse
The ROM you flashed is a very outdated leak that was known to be riddled with bugs and performance issues.
Go to the development page to check out the latest and greatest ROMS
http://forum.xda-developers.com/forumdisplay.php?f=1496
Seraphim can also be found here
http://forum.xda-developers.com/showthread.php?t=1602632
Izzue said:
The ROM you flashed is a very outdated leak that was known to be riddled with bugs and performance issues.
Go to the development page to check out the latest and greatest ROMS
http://forum.xda-developers.com/forumdisplay.php?f=1496
Seraphim can also be found here
http://forum.xda-developers.com/showthread.php?t=1602632
Click to expand...
Click to collapse
Thank you very much.
droid_noob1 said:
I've been using my browser to install apps on my phone since I got, it's just started having this issue since I flashed an ICS rom, so it's not that I don't know how to do it, because I do, this is an issue with the rom.
But I will take your advice instead of try to argue with you, can you link me to your rom?
Click to expand...
Click to collapse
Man dman is an elite developer...do like he tells u man and u will be fine u should feel lucky he even reslonded....use the play store to get ur apps...go to settings about phone to see what ur on...then if ur not rooted do that then install mesosphere remix cm9 and watch ur self fall in love with ur phone all over again
Sent from my SAMSUNG-SGH-I717 using xda premium
droid_noob1 said:
Hello all, I hope this is the right place to ask this, but I recently crossed over to Android devices from BB so I'm still trying to figure out my way around things. Today I flashed ICS Android version 4.0.3, kernel version 3.0.8-perf-i717uclc5-cl281649 and build number iml74k.144 onto my Note and the installation went fine, had no problems at all, but now I can't install apps from my web browser(Chrome) onto my Note like I could before the flash. USB debugging is on.
Is this something that I may have done wrong? Any help would be much appreciated.
Click to expand...
Click to collapse
Dl apps via browser is not the way to go ne way idk who told u that...unlike BB we have our own play store with 175,000 plus apps
Edit..,dl titanium backup and superuser first thing!!
Sent from my SAMSUNG-SGH-I717 using xda premium
So I downloaded the Seraphim First Flight, but I have no idea how to flash it onto my device, I'm assuming you can't do it through Odin?
You better stop! There are so many instructions about rom flashing. Study up!
You can ruin your phone with the click of a button. You sound close to it.
It's really not that hard...
0. Download Rom of your choice to somewhere on your external SD card.
1. Use Odin to flash the latest version of i717 ClockWorkMod Recovery (aka "CWM" )
2. Boot into CWM (use 3-finger salute method to boot into recovery).
3. Clear cache/factory reset
4. Install Rom of your choice that you had saved to your external SD card.
5. Reboot and enjoy .
But yeah, if any/all of the above confuses you, then you REALLY need to spend many hours reading before you go any further.
As for roms, I recommend dman's (as already mentioned) or ICS Perfection -- both have lots of active support...
Good luck.
+1 listen to dman he is D-MAN. you cant go wrong with anything made by THE COLLECTIVE...... any Collective rom will set you straight, just read all instructables .
droid_noob1 said:
So I downloaded the Seraphim First Flight, but I have no idea how to flash it onto my device, I'm assuming you can't do it through Odin?
Click to expand...
Click to collapse
Dl the one on top...mesosphere its the newest leak..
Sent from my SAMSUNG-SGH-I717 using xda premium
droid_noob1 said:
Hello all, I hope this is the right place to ask this, but I recently crossed over to Android devices from BB so I'm still trying to figure out my way around things. Today I flashed ICS Android version 4.0.3, kernel version 3.0.8-perf-i717uclc5-cl281649 and build number iml74k.144 onto my Note and the installation went fine, had no problems at all, but now I can't install apps from my web browser(Chrome) onto my Note like I could before the flash. USB debugging is on.
Is this something that I may have done wrong? Any help would be much appreciated.
Click to expand...
Click to collapse
Him mentioning USB debugging immediately made me think he was speaking about side loading APKs.
If you're trying to install apps downloaded from sources other than the market, for future reference, you must check the "unknown sources" box under settings>security.
Sent from my SAMSUNG-SGH-I717 using XDA Premium HD app
droid_noob1 said:
So I downloaded the Seraphim First Flight, but I have no idea how to flash it onto my device, I'm assuming you can't do it through Odin?
Click to expand...
Click to collapse
no u flash through cwm..make sure u factory reset and wipe both caches...and sometimes u need to fix permissions
hi i flashed the uk btu 4.1.1 jb to my phone and used csc changer to change the csc on my phone to btu. the phone connects fine in kies but when i put the phone into recovery mode the droid is lying on his back and has a red triangle coming out of his chest like hes had a heart attack does anyone know how to fix this please i dont like seeing him like this
"heart attack"! Haha!
Yeah, I've got the same issue. I really hate seeing my Galaxy S3's soul dead! :-o
Faryaab just told me that this is normal and that the note 2 is the same so we have nothing to worry about.
leerock360 said:
Faryaab just told me that this is normal and that the note 2 is the same so we have nothing to worry about.
Click to expand...
Click to collapse
Yeah, I read that. I'm still not re-assured, though. :silly:
were you rooted before?
slaphead20 said:
were you rooted before?
Click to expand...
Click to collapse
Nope, Shhhllllaaaaapy.
DeadSOL said:
Nope, Shhhllllaaaaapy.
Click to expand...
Click to collapse
Ha ha . Is your device status modified?
DeadSOL said:
Nope, Shhhllllaaaaapy.
Click to expand...
Click to collapse
I had this and I was rooted, does it only happen on devices that were rooted?
slaphead20 said:
Ha ha . Is your device status modified?
Click to expand...
Click to collapse
Nooooooope.
I flashed stock ROM after stock ROM after stock ROM. Apparently, my device status is still not modified since I've done nothing else with my phone!
DeadSOL said:
Nooooooope.
I flashed stock ROM after stock ROM after stock ROM. Apparently, my device status is still not modified since I've done nothing else with my phone!
Click to expand...
Click to collapse
Odin flash? That increases the flash counter doesn't it?
http://forum.xda-developers.com/showthread.php?p=33185382
Sent from my GT-I9300 using xda app-developers app
Guys,
i have a Gnex and can tell you thats just how recovery looks...
Nothing to be worried about.
On Gnex we have Andy with the triangle and have to hold down volume buttons to get the options to appear... Dont know if you guys already have the options or just a blank screen with dead Andy.
If you have no options try a few key combos and they will appear
dont worry nothings broken.
zolah said:
Guys,
i have a Gnex and can tell you thats just how recovery looks...
Nothing to be worried about.
On Gnex we have Andy with the triangle and have to hold down volume buttons to get the options to appear... Dont know if you guys already have the options or just a blank screen with dead Andy.
If you have no options try a few key combos and they will appear
dont worry nothings broken.
Click to expand...
Click to collapse
Lol Andy but I don't wanna see my Andy die he's so nice and doesn't deserve death.
Sent from my GT-I9300 using xda premium
It is most likely due to cwm 6.0.1.2 being broken. Can't create nandroid backup or detect external sd . I use 5.0.2.1 and can create backups on my external card.
In every other respect it's ok though as far as I know
Sent from my GT-I9300 using xda app-developers app
mossy1963 said:
It is most likely due to cwm 6.0.1.2 being broken. Can't create nandroid backup or detect external sd . I use 5.0.2.1 and can create backups on my external card.
In every other respect it's ok though as far as I know
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
They are talking about stock recovery I do believe?
slaphead20 said:
They are talking about stock recovery I do believe?
Click to expand...
Click to collapse
my phone has never been rooted . only ever officail stock roms on my phone. just for info.
leerock360 said:
my phone has never been rooted . only ever officail stock roms on my phone. just for info.
Click to expand...
Click to collapse
flashed with Odin?
slaphead20 said:
They are talking about stock recovery I do believe?
Click to expand...
Click to collapse
Oops sorry...thats what happens when you try to contribute from mobile xda in work with your phone hidden under the desk ! you end up posting complete garbage
not the first time...won't be the last
slaphead20 said:
flashed with Odin?
Click to expand...
Click to collapse
Yes flashed with odin
When going full unroot I fixed this by flashing stock recovery with s3 toolkit.
Not sure if anyone else has this problem, but when I restored my nook to stock using the 1.4.2 report image the touch screen didn't work. Does anyone else have this problem and know how to fix it?
Sent from Nook Tablet 8GB with CM10.1 iamafanof's build
Re: [Q] Touch screen not working for stock 1.4.2 report image?
You had 10 touch firmware installed on cm10? You should revert to 2 touch before returning to stock.
Sent from my ST27i
And the solution is to go back to CM10 and reflash original touch firmware, and then go back to stock.
satan89 said:
You had 10 touch firmware installed on cm10? You should revert to 2 touch before returning to stock.
Sent from my ST27i
Click to expand...
Click to collapse
What's the best way to do this without being able to touch the screen?
Do any of the Nook kernels support USB to OTG? If so I can try a USB mouse to manipulate the screen
Re: [Q] Touch screen not working for stock 1.4.2 report image?
No need for touch when using CWM. Install CM10 from CWM and you're back in business.
Sent from my GT-P7300 using Tapatalk 2
asawi said:
No need for touch when using CWM. Install CM10 from CWM and you're back in business.
Sent from my GT-P7300 using Tapatalk 2
Click to expand...
Click to collapse
Did that, touch screen stil doesn't work. Im pretty sure it's bad hardware. I have another thread open with the details of what i've tried. Feel free to take a peek.
Re: [Q] Touch screen not working for stock 1.4.2 report image?
Okay thank you the stock works now.
Sent from Nook Tablet 8GB with CM10.1 iamafanof's build.
asawi said:
And the solution is to go back to CM10 and reflash original touch firmware, and then go back to stock.
Click to expand...
Click to collapse
After weeks of fiddling ( I have no clue How I got here!) I think I got CM10 installed now How and where might I find the original Touch firmware to get my Stock touch to work?I have been working on this for almost 6 months! I know I should be on the short Yellow bus But SO help would be greatly appreciated. Thanks... OH I forgot to say please!
Re: [Q] Touch screen not working for stock 1.4.2 report image?
Most Cm10 builds come with the app installed.
Look. For app 'touchscreen firmware flasher '
Sent from my ST27i
satan89 said:
Most Cm10 builds come with the app installed.
Look. For app 'touchscreen firmware flasher '
Sent from my ST27i
Click to expand...
Click to collapse
I hate to sound slow but I guess I cant help it... So I tap that touch app and initiate it, is there anything that I need to know about how the touch firmware flasher works? IS it a toggle? Are there check boxes I have to tick? Sorry, But I kind of want to know what to expect... I have been going crazy to get to this point! Thanks again!
There are boxes to click to start the process. So it's not started automatically when you click the app, if that's what you're worried about.
asawi said:
There are boxes to click to start the process. So it's not started automatically when you click the app, if that's what you're worried about.
Click to expand...
Click to collapse
Well I am worried about clicking the wrong boxes and such... Is it self explanatory, is it intuitive? I lost the touch capability on the stock Nook and have been trying to get it back for about 6 months, forgive me if I am a little "gun shy". I just want to get it right and be done with it! Thanks!
:fingers-crossed:
Re: [Q] [Solved] Touch screen not working for stock 1.4.2 report image?
Depending on what build you have the firmware flasher might look a little different. All in all they all do the same. On the build I have there is only one button to push which will either flash stock (2 touch) or 10 touch.
For the touch screen to work on a stock Barns and Noble Tablet you need to flash it to stock (2 touch). If you already wiped to factory reset you'll have to re install CM 10. Then use the firmware flasher to return to stock. (There may be a simpler way but that is what came to my mind first.)
If you have any further problems send me a message or email me at [email protected]
Sent from Nook Tablet 8GB with CM10.1 iamafanof's build.
so i was runing cm 10.2 off my sd card when i ran itno a setting about upgrading the touch firmware so of course without reading i just went ahead and did it... well know my nook screen is unresponsive and have only found post regarding this where people have hard installed cm ... how can i fix my nook to recognize touch again?
bigfdaddy2 said:
so i was runing cm 10.2 off my sd card when i ran itno a setting about upgrading the touch firmware so of course without reading i just went ahead and did it... well know my nook screen is unresponsive and have only found post regarding this where people have hard installed cm ... how can i fix my nook to recognize touch again?
Click to expand...
Click to collapse
i fixed it i didnt know i had to reinstall cm on my sd card after it did the firmware upgrade sorry for waste of post n time.
Might want to edit your post title to reflect [SOLVED] rather than [Q]. Just a thought.
Idk how to from tapatalk
Sent from my SGH-I317 using Tapatalk
So do it once you get near a computer lol
skepticmisfit said:
So do it once you get near a computer lol
Click to expand...
Click to collapse
Planned on it lol
Sent from my SAMSUNG-SGH-I317 using Tapatalk
Hello,
I hope I am not reposting anything, but I can't seem to find this information. How exactly do you get safe strap and how do you boot into it?
I see there is a list of roms that work with safestrap, but I can't see a how-to.
Thanks!
Mike
http://forum.xda-developers.com/showthread.php?p=49334432
Sent from my SCH-I545 using Xparent Skyblue Tapatalk 2
Thanks!
I got it working. So now what do I do with my stock Verizon loadout?That is still taking up space ?
mrw5641 said:
Thanks!
I got it working. So now what do I do with my stock Verizon loadout?That is still taking up space ?
Click to expand...
Click to collapse
Leave it alone, as hashcode suggests. I believe some have wiped and run a rom on the stock slot. If you go that route and run into problems, DONT go to hashcode asking for help, as he advises against it.
Thank you.
I was running out of space so I guess I need to get an SD Card.
gnubian said:
Leave it alone, as hashcode suggests. I believe some have wiped and run a rom on the stock slot. If you go that route and run into problems, DONT go to hashcode asking for help, as he advises against it.
Click to expand...
Click to collapse
Sorry but this is exactly why we have knox.
Sent from my SCH-I545
mrw5641 said:
Thank you.
I was running out of space so I guess I need to get an SD Card.
Click to expand...
Click to collapse
You CAN run hyper drive on your stock slot, as I said before. I do on mine. If you want to know how to do it (with wifi working) shoot me a pm.
gnubian said:
You CAN run hyper drive on your stock slot, as I said before. I do on mine. If you want to know how to do it (with wifi working) shoot me a pm.
Click to expand...
Click to collapse
+1 Running HD RLS15 is fine in Stock Slot. I've been doing this setup for months without any issues. In fact your available memory will be partitioned as though you were on VZW Stock OS.
Sent from my SCH-I545 using xda app-developers app