For those who didn't know, the new version of CWR available through ROM Manager has the large fonts, and seems to work very well.
D
.
Yep got koush to finally update it. Off mode charging will work too.
Only for the DLX. The other two devices got to head over to my thread still.
Sent from my Nexus 7 using Tapatalk 2
fantastic, downloading now.
I've always like CWR > TWRP
Just purchased. Thanks for the heads up!
Via Viper DNA
Flyhalf205 said:
Yep got koush to finally update it. Off mode charging will work too.
Only for the DLX. The other two devices got to head over to my thread still.
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
Were you(all) able to get adb commands to work too?
Sent from my HTC DNA™
Flyhalf205 said:
Yep got koush to finally update it. Off mode charging will work too.
Only for the DLX. The other two devices got to head over to my thread still.
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
so for the DNA is the new version the same version you have on your thread in the development section?
v6.0.2.7 ?
lazarus2297 said:
so for the DNA is the new version the same version you have on your thread in the development section?
v6.0.2.7 ?
Click to expand...
Click to collapse
The Touch is the EXACT same version as in my thread.
Flyhalf205 said:
The Touch is the EXACT same version as in my thread.
Click to expand...
Click to collapse
so what about regular non-touch? that is the version i have installed now
lazarus2297 said:
so what about regular non-touch? that is the version i have installed now
Click to expand...
Click to collapse
The no touch (classic) is different. Mine has red font
Sent from my ADR6425LVW using Tapatalk 2
hungsolow said:
Were you(all) able to get adb commands to work too?
Sent from my HTC DNA™
Click to expand...
Click to collapse
Flyhalf205 said:
The Touch is the EXACT same version as in my thread.
Click to expand...
Click to collapse
uhh, yeeah, so you should let everyone know that adb still doesnt work so there's no confusion that this is fully functional.
hungsolow said:
uhh, yeeah, so you should let everyone know that adb still doesnt work so there's no confusion that this is fully functional.
Click to expand...
Click to collapse
i concur that adb does not work on either version.. the "official" one with the bigger font, or Flyhalf205's version with red colored font.. I did use adb sideload on the previous "official" version and it worked fine, I haven't tried it since flashing the newer one..
I will say that for flashing ROM's and making and restoring backups I haven't had any issues with the older (smaller font) official recovery..
Neither will charge in recovery but both let the phone charge while off without booting into recovery automajically..
I do like the "power off" feature that Flyhalf205 incorporates into his recovery.
Related
Hi all.
r81 is the last release for Android 5.0.
r82 or newer is only for Android 5.1 - don't flash them on older Android versions.
Download:
boot image:
http://kernels.franco-lnx.net/Nexus7/5.1/
zips:
http://kernels.franco-lnx.net/Nexus7/5.1/zips
Installation:
fastboot flash boot boot_name_img
or
flash the .zip in the recovery
Changelog:
http://kernels.franco-lnx.net/Nexus7/5.1/appfiles/changelog.xml
Source:
https://github.com/franciscofranco/Grouper-3.1.10
Official app support:
https://play.google.com/store/apps/details?id=com.franco.kernel.free
Got any questions that you couldn't find after searching?
FAQ: http://forum.xda-developers.com/showthread.php?t=2532422
Disclaimer to moderators:
Slight OT is fine, but when users decide to act stupid they should be dealt with with the appropriate means - its really annoying for me when OT turns crazy. Please put the warning/ban hammer anytime any of you think there's lack of respect and/or too much unwanted OT crap - but if it doesn't meet this criteria let the OT posts alone. Thank you.
Cheers!
Fsync toggle:
It's disabled by default. Enabled = stock IO speed while having data integrity; disabled = more IO throughput but less data integrity
echo Y > /sys/module/sync/parameters/fsync_enabled (N to disable and Y to enable)
GPU clock interface:
To check the current GPU frequency:
cat /sys/devices/system/cpu/cpu0/cpufreq/gpu_oc
To change it:
echo X > /sys/devices/system/cpu/cpu0/cpufreq/gpu_oc (change the X with your desired value. Should work up to 750Mhz at least, beyond that is pure madness)
Today is a good day
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
YUSS
850T5m said:
Today is a good day
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
Click to expand...
Click to collapse
I've been waiting for this day for almost a month. Can't wait to see this kernel develop like the one for the GNex. I swear by Franco.
awesome !! After Faux coming to Nex7 now we can also welcome Franco !! this will be a great tablet !!!
I shat my pants when I saw your name over here, finally on the 7.
Sent from my paranoid Nexus 7
welcome francisco
sway40 said:
I shat my pants
Click to expand...
Click to collapse
I'm guessing that is a technical term. Maybe someone should add it to the wiki.
On topic: I flashed r1, but am getting a never ending boot animation (not a loop).
Also tried 'fastboot erase cache'. Will report more when I know it.
EDIT: Same thing happens for me each time I try... never ending bootanimation.
nobnut said:
I'm guessing that is a technical term. Maybe someone should add it to the wiki.
On topic: I flashed r1, but am getting a never ending boot animation (not a loop).
Also tried 'fastboot erase cache'. Will report more when I know it.
Click to expand...
Click to collapse
are you on CM10? Mine didn't boot also. Went back to stock just for Franco <3 and flashed fine.
great share!
Yesss, does this mean you will update your app to work with nexus 7?
Sent from my Nexus 7 using xda premium
danielvc said:
are you on CM10? Mine didn't boot also. Went back to stock just for Franco <3 and flashed fine.
Click to expand...
Click to collapse
That'll be the reason
I totally forgot I was on CM10
leelaa said:
Yesss, does this mean you will update your app to work with nexus 7?
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
Yes, soon.
And yes, it might not boot on CM derivates, this was built from stock ramdisk.
franciscofranco said:
Yes, soon.
And yes, it might not boot on CM derivates, this was built from stock ramdisk.
Click to expand...
Click to collapse
Great stuff, cant wait
Sent from my Nexus 7 using xda premium
Franco, can you update to use the any kernel updater so you don't have to worry about ramdisk? Would be nice to use on aokp
Sent from my Nexus 7 using Tapatalk 2
Grand Prix said:
Franco, can you update to use the any kernel updater so you don't have to worry about zram? Would be nice to use on aokp
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
No, my kernels come bundled with the ramdisk, thats how I use and thats what I prefer, and it won't change. ZRAM? lol...
OK then thank you for your work, good luck to you.
Sent from my Nexus 7 using Tapatalk 2
I know Paranoid Android is CM based - anyone try franco's kernel with it?
ragnarokx said:
I know Paranoid Android is CM based - anyone try franco's kernel with it?
Click to expand...
Click to collapse
It doesn't work on PA.
ragnarokx said:
I know Paranoid Android is CM based - anyone try franco's kernel with it?
Click to expand...
Click to collapse
Try. If it doesn't boot, flashboot boot boot.img of downloaded rom.
Hey guys we are working on our updater and initially only plan to support TWRP for auto install, so here ya go.
Install:
Code:
fastboot flash recovery recovery-passion-twrp-2.6.0.0-2013.07.10.img
MD5:
Code:
334f7c1298e34001500adf48f8d2e029 recovery-passion-twrp-2.6.0.0-2013.07.11.img
Download:
http://evervolv.com/get/recovery-passion-twrp-2.6.0.0-2013.07.11.img
Build from Evervolv ICS sources and kernel with unmodified TWRP
Evervolv/Kernel source links in signature
TWRP info: http://www.teamw.in/project/twrp2
Amazing! Million thanks making N1 still alive..
Sent from my Nexus One using xda app-developers app
How to install it using terminal emulator?
Sent from my Nexus One using xda app-developers app
~semsem~ said:
How to install it using terminal emulator?
Sent from my Nexus One using xda app-developers app
Click to expand...
Click to collapse
If your rom has flash_image program (like evervolv) just:
Code:
$ su
# flash_image recovery /sdcard/recovery-passion-twrp-2.6.0.0-2013.07.10.img
texasice said:
If your rom has flash_image program (like evervolv) just:
Code:
$ su
# flash_image recovery /sdcard/recovery-passion-twrp-2.6.0.0-2013.07.10.img
Click to expand...
Click to collapse
Any chance of getting a flashable zip for this recovery?
Thanks for your hard work.
Sent from my GT-S5570 using xda app-developers app
Is it the same file provided by teamwin's website?
Enviado do meu Nexus One
I accidently disabled USB mass storage in the 7/10 build its fixed here http://evervolv.com/get/recovery-passion-twrp-2.6.0.0-2013.07.11.img
ponces said:
Is it the same file provided by teamwin's website?
Click to expand...
Click to collapse
Thank you, Texasice, for all you've done to keep our N1s alive! I'm planning on replacing my long-standing 4ext recovery with twrp (on a cm7 and cm10 phone). Like the quoted post, its not clear to me how your recovery differs, if it does, from teamwin's version.
CAL7 said:
Thank you, Texasice, for all you've done to keep our N1s alive! I'm planning on replacing my long-standing 4ext recovery with twrp (on a cm7 and cm10 phone). Like the quoted post, its not clear to me how your recovery differs, if it does, from teamwin's version.
Click to expand...
Click to collapse
Well i guess there isnt any. When i first searched i was unable to find a current version of TWRP so i build one.
For anyone wanting official it is here http://techerrata.com/browse/twrp2/passion
@texasice
TWRP 2.6.1.0 released. Do you think update?
respawn05 said:
@texasice
TWRP 2.6.1.0 released. Do you think update?
Click to expand...
Click to collapse
Give them a couple more days, if they don't release an official one i'll build one.
Can still be updated via goo manager !!
texasice said:
Give them a couple more days, if they don't release an official one i'll build one.
Click to expand...
Click to collapse
Same question for 2.7, Do you think update? :angel:
texasice said:
Give them a couple more days, if they don't release an official one i'll build one.
Click to expand...
Click to collapse
Will you update man?
Hey texasice, can you update ?
---------- Post added at 03:59 AM ---------- Previous post was at 03:54 AM ----------
texasice said:
Give them a couple more days, if they don't release an official one i'll build one.
Click to expand...
Click to collapse
can you update please?
I doubt it dude. Use 4ext recovery.
Sent from my One X
rabies876 said:
I doubt it dude. Use 4ext recovery.
Sent from my One X
Click to expand...
Click to collapse
I'm not a dude.
doubt what?
4ext is crap.
Okay people, we now have a fully functional CWMR
The Goods
Official builds from clockworkmod.com
And koush had been busy and hopefully has a few things fixed.
recovery-clockwork-6.0.4.4-hammerhead.img
Code:
sha256: 0a1f654df4dc5687762c679ea9da5d2a5706448fe8e99052e53a1c3f6940e38d
recovery-clockwork-touch-6.0.4.4-hammerhead.img
Code:
sha256: 04d3214635fc078644bb60fb2fff6481098fd5f1292638ed9292fd11a307836f
Able to be installed via ROM Manager now too.
My Builds w/ swipe/touch controls enabled
recovery-clockworkmod-6.0.5.0-hammerhead.img
To Install:
Code:
adb reboot bootloader
Code:
fastboot flash recovery recovery.img
NOTE: To access the backup via a root explorer, look in /mnt/clockworkmod.
Thanks to
Exel - for testing
ricky310711 - for making me use my noggin.
Anyone else that tested!!! I thank you!
DISCLAIMER: As always, I am not responsible for what you do with your device. USE AT OWN RISK!!!
XDA:DevDB Information
[RECOVERY] [CWMR] [Unofficial] Clockworkmod Recovery for the Nexus 5, Tool/Utility for the Google Nexus 5
Contributors
PlayfulGod
Version Information
Status: Stable
Current Stable Version: 6.0.4.6
Stable Release Date: 2014-01-08
Created 2013-11-04
Last Updated 2014-07-02
Reserved
screenshots provided by Exel.
Reserved
TESTED!!!
Hey Bro i just tested your CWM .....I LIKE THE RAINBOW MODE BTW
the only thing that didnt work was the ENTER
up/down work fine i just couldnt Select anything
good job though
Froz3nsolid said:
Hey Bro i just tested your CWM .....I LIKE THE RAINBOW MODE BTW
the only thing that didnt work was the ENTER
up/down work fine i just could Select anything
good job though
Click to expand...
Click to collapse
does swipe/gesture control work???
I/we prolly will have to do a custom recovery_keys.c to get the power button to select working.
And thanks, gweedo767 is the one to thank for rainbow mode and swipe control.
PlayfulGod said:
does swipe/gesture control work???
I/we prolly will have to do a custom recovery_keys.c to get the power button to select working.
And thanks, gweedo767 is the one to thank for rainbow mode and swipe control.
Click to expand...
Click to collapse
i was able to do UP/DOWN
but the enter doesnt work though i tried swiping to the right anywhere on the screen and .....................nothing
question if i use an app like flashify it should work right
im trying to flash a kernel cause the battery life is a bit disappointing
Froz3nsolid said:
i was able to do UP/DOWN
but the enter doesnt work though i tried swiping to the right anywhere on the screen and .....................nothing
question if i use an app like flashify it should work right
im trying to flash a kernel cause the battery life is a bit disappointing
Click to expand...
Click to collapse
should be able to flash a boot.img just like you did recovery. Just sub in
Code:
fastboot flash boot yourboot.img
instead.
Oh, you are on here!
Hey, bud. Still waiting for my nexus.. well, waiting to get off work. xD
PlayfulGod said:
should be able to flash a boot.img just like you did recovery. Just sub in
Code:
fastboot flash boot yourboot.img
instead.
Click to expand...
Click to collapse
i know but i cant seem to find the .IMG in the devs OP all i find are .ZIPS
im trying to unzip it to see if i can find the .img in there
Froz3nsolid said:
i know but i cant seem to find the .IMG in the devs OP all i find are .ZIPS
im trying to unzip it to see if i can find the .img in there
Click to expand...
Click to collapse
Yea the img is prolly in the zip. He prolly has users using TWRP to flash it.
Ah......but i hate twrp imma ask if he can provide link to .img
Sent from my Nexus 5 using XDA Premium 4 mobile app
Froz3nsolid said:
Ah......but i hate twrp imma ask if he can provide link to .img
Sent from my Nexus 5 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
pull it from the zip
Zip filed is corrupted ?
Sent from my Nexus 5 using XDA Premium 4 mobile app
Good effort, but unfortunately select option not workin therefore CWM unusable..
Thank you and keep up the good work..
PlayfulGod said:
pull it from the zip
Click to expand...
Click to collapse
Question, does TWRP have an option to select using the buttons or is it all touch?
Maybe you can see on there, don't really know.. never used TWRP.
Exel said:
Question, does TWRP have an option to select using the buttons or is it all touch?
Maybe you can see on there, don't really know.. never used TWRP.
Click to expand...
Click to collapse
Look on the TWRP OP is its on the same page that you found this
This is for.CWM
Sent from my Nexus 5 using XDA Premium 4 mobile app
fazzieng said:
Good effort, but unfortunately select option not workin therefore CWM unusable..
Thank you and keep up the good work..
Click to expand...
Click to collapse
yes I realize that and thanks, still working on it.
Exel said:
Question, does TWRP have an option to select using the buttons or is it all touch?
Maybe you can see on there, don't really know.. never used TWRP.
Click to expand...
Click to collapse
Troy_Dees just added what he needed for TWRP and doesnt appear to have touch much of the stock code itself. Will have a closer look tho. And afaik TWRP is touch only.
Froz3nsolid said:
Look on the TWRP OP is its on the same page that you found this
This is for.CWM
Sent from my Nexus 5 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thanks, was actually wondering about the enter button not working, not really about TWRP.
PlayfulGod said:
Troy_Dees just added what he needed for TWRP and doesnt appear to have touch much of the stock code itself. Will have a closer look tho. And afaik TWRP is touch only.
Click to expand...
Click to collapse
Hm, then would an alternative be trying to build ClockworkMod Recovery Touch until the button issues are solved?
Just throwing ideas out.
As mentioned before the select key does not work, also the resolution is huge and this makes the writing in recovery super small, the few lines available are like 3mm in height and almost impossible to read
Exel said:
Thanks, was actually wondering about the enter button not working, not really about TWRP.
Hm, then would an alternative be trying to build ClockworkMod Recovery Touch until the button issues are solved?
Just throwing ideas out.
Click to expand...
Click to collapse
I cant build touch until its forked into CM repos. I dont have access to koush's touch src.
hutzdani said:
As mentioned before the select key does not work, also the resolution is huge and this makes the writing in recovery super small, the few lines available are like 3mm in height and almost impossible to read
Click to expand...
Click to collapse
K that can be addressed.
Also new img uploaded, same link.
As always, you are responsible for your phone, and its warranty
I built this recovery because adb was not working in the official. I have submitted all my changes and I am sure this will be fixed shortly but until then I will put this here. Bassically I compiled the stock ND2 kernel with some small modifications and rebuilt the recovery.img with that. everything else should be exactly the same but honestly I did not test everything so please feel free to let me know.
***UPDATE 10/4/14***
Created version thats branded as kltespr, did this so CM11 is now able to auto update without modifying the CM package. Also, ADB still works. If anybody knows how to reduce the size of this image, please let me know since it is a little larger than the stock TWRP. Also built an image from the 2.8.0.1 base, which seems to have the same kernel from my original build to enable ADB, all I added here was the mod to kltespr so CM can update.
Use dd to install these images:
Newest Link 10/4/2014, working ADB and branded as kltespr so CM11 auto updates work:
Working ADB and tagged kltespr so CM11 auto updates work
Same as above but built from version 2.8.0.1 of TWRP
---Below here are all klte with working ADB, but CM11 fails to auto update complaining of wrong device---
Here is the link:
miked63017-openrecovery-twrp.img
Or try to grab it from my drive:
miked63017-openrecovery-twrp.img
Use odin to install this:
miked63017-openrecovery-twrp.tar.md5
Kernel Source Used:
https://github.com/miked63017/SM-G900P_ND2_KERNEL
This file won't download.
ChadH42 said:
This file won't download.
Click to expand...
Click to collapse
Added my google drive URL back to OP
Just got a test image from twrp, download should be up as official soon...
Sent from my SM-G900P using xda app-developers app
Excellent. Ty
Sent from my SM-G900P using Tapatalk
miked63017 said:
Just got a test image from twrp, download should be up as official soon...
Sent from my SM-G900P using xda app-developers app
Click to expand...
Click to collapse
whats the status on this is it offical yet.
Sent from my SM-G900P using Tapatalk
vinman12 said:
whats the status on this is it offical yet.
Sent from my SM-G900P using Tapatalk
Click to expand...
Click to collapse
I haven't heard anything back yet, but their test images worked as does the one in OP
Sent from my SM-G900P using xda app-developers app
Sweet thanks
Sent from my SM-G900P using Tapatalk
Hello, used to be HTC so I'm new to the Samsung thing. TWRP was the recommended recovery for the HTC devices. Is this recommended over the CWM recovery?
Thanks
talroot said:
Hello, used to be HTC so I'm new to the Samsung thing. TWRP was the recommended recovery for the HTC devices. Is this recommended over the CWM recovery?
Thanks
Click to expand...
Click to collapse
I like TWRP, but this is another option http://forum.xda-developers.com/showthread.php?t=2706253 . Honestly the only reason I prefer TWRP is probably because I've never used Philz, but I do hear good things about it.
miked63017 said:
I like TWRP, but this is another option http://forum.xda-developers.com/showthread.php?t=2706253 . Honestly the only reason I prefer TWRP is probably because I've never used Philz, but I do hear good things about it.
Click to expand...
Click to collapse
I have used all 3 available customer recoveries (TWRP, CWM, Philz) & I prefer TWRP. So me is easier and fool-proof.
Just saw this now, hope it can help with my mount/odex issues. Didnt have adb via recovery as an option before, looking forward to trying this. Thx mike
sleshepic said:
Just saw this now, hope it can help with my mount/odex issues. Didnt have adb via recovery as an option before, looking forward to trying this. Thx mike
Click to expand...
Click to collapse
Yeah its been handy. The kernel is huge though, do you mind if I pull in some of your commits to bring the size down?
Sent from my SM-G900P using XDA Free mobile app
miked63017 said:
Yeah its been handy. The kernel is huge though, do you mind if I pull in some of your commits to bring the size down?
Sent from my SM-G900P using XDA Free mobile app
Click to expand...
Click to collapse
My commits up there now wont help with that, I didnt push my defconfig.
You can easily change the compression and logging (less of a size diff) in either the defconfig in .../configs or through
$ menuconfig
prior to build
miked63017 said:
I like TWRP, but this is another option http://forum.xda-developers.com/showthread.php?t=2706253 . Honestly the only reason I prefer TWRP is probably because I've never used Philz, but I do hear good things about it.
Click to expand...
Click to collapse
Thanks, I went with TWRP since that's what I'm familiar with.
Just DL'd, says it's a Winzip file but my WinZip won't extract it.
Is it meant to be a .tar or Zip file?
thx
sleshepic said:
Just DL'd, says it's a Winzip file but my WinZip won't extract it.
Is it meant to be a .tar or Zip file?
thx
Click to expand...
Click to collapse
Its a flashable zip. I never use winzip so I'm not sure if it should be able to be extracted with it. I think its technically a 7zip zip file in windows, linux I just run 'unzip $FILENAME'. The google drive link is probably the most reliable, maybe try that one if you haven't already. If there are still problems I can re-upload, just let me know.
Sent from my SM-G900P using XDA Free mobile app
**UPDATE**
I take that back I only uploaded the recovery.img, I flash it with dd after putting it in /sdcard/
Code:
dd if=/sdcard/miked63017-openrecovery-twrp.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery
Or if you just want to see whats in it, you can extract it like a normal boot.img.
Will try to put up a zip and/or tar tomorrow, honestly I thought they would have had an official one with adb working by now.
Flashify
Just use Flashify to push .img to your phone.
Ok with patched twrp I get this after flashing rom
Goes to boot into android, and keeps throwing up "unfortunately, SAE has stopped"
I belive that to be binary problem, is this correct and how to solve
Sent from my SM-G900P using Tapatalk
vinman12 said:
Ok with patched twrp I get this after flashing rom
Goes to boot into android, and keeps throwing up "unfortunately, SAE has stopped"
I belive that to be binary problem, is this correct and how to solve
Sent from my SM-G900P using Tapatalk
Click to expand...
Click to collapse
Haven't seen this before, what rom are you flashing?
Sent from my SM-G900P using XDA Free mobile app
For those of you who use the GNL, you can get the newest lollipop version here:
http://forum.xda-developers.com/android/apps-games/gnl-5-0-t2909143
I've confirmed that it works on our phone, the Verizon G3.
Disclaimer: I don't take credit for this in any way; full credit goes to Omar1c.
sentry_mode_activated said:
For those of you who use the GNL, you can get the newest lollipop version here:
http://forum.xda-developers.com/android/apps-games/gnl-5-0-t2909143
I've confirmed that it works on our phone, the Verizon G3.
Disclaimer: I don't take credit for this in any way; full credit goes to Omar1c.
Click to expand...
Click to collapse
What's the install process, is it flashable?
chocolate8175 said:
What's the install process, is it flashable?
Click to expand...
Click to collapse
Read the first post of the thread.
This is hanging a lot.. Get an error saying google search has closed.. Have to uninstall.. Running stock unrooted 4.4.4
Sent from my XT1033 using XDA Free mobile app
ylexot said:
Read the first post of the thread.
Click to expand...
Click to collapse
Yeah, did that. Don't see any instructions, that's why I asked. Care to be more helpful...?
chocolate8175 said:
What's the install process, is it flashable?
Click to expand...
Click to collapse
Yep flashable in recovery.
Does this need to be "bumped"
Sent from my VS985 4G using Tapatalk
HerroMoto said:
Does this need to be "bumped"
Sent from my VS985 4G using Tapatalk
Click to expand...
Click to collapse
To my knowledge, only kernels and ROMs need to be bumped other than that you should be good.
I flashed it via TWRP, no problems at all. I will say I'm using the Jasmine ROM, so not stock. Not sure how much of a difference that would make, but I can confirm it works pretty well with no FCs.
sentry_mode_activated said:
I flashed it via TWRP, no problems at all. I will say I'm using the Jasmine ROM, so not stock. Not sure how much of a difference that would make, but I can confirm it works pretty well with no FCs.
Click to expand...
Click to collapse
Not having any luck, after flashing I just get a black screen when trying to use the Google launcher
I extracted the zip and manually moved the apks over and now it's working just fine
Really smooth launcher
Sent from my VS985 4G using XDA Free mobile app
I am having the same issue, I had to use multi window to open play store and install Nova, where did you move the APK files to?
So... Strange problem here. First off, the launcher is great. My problem however is disturbing, so every time I reboot I have to reinstall the velvet apk. Does anybody have any advice on how to solve this? Thanks